The time stamps should be accurate to within about +-1ms now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@120 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The time stamps should be accurate to within about +-1ms now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@120 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Initialization of PTT to OFF is fixed.
3. WSJT_Source_Code.tst updated.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@117 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Initialization of PTT to OFF is fixed.
3. WSJT_Source_Code.tst updated.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@117 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Fixed grid2deg to be case-insensitive for grid locator.
3. Bumped Revision number to 5.9.3.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@116 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Fixed grid2deg to be case-insensitive for grid locator.
3. Bumped Revision number to 5.9.3.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@116 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Updated README_592.TXT in preparation for Windows release.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@115 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Updated README_592.TXT in preparation for Windows release.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@115 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
all files previously using conf.h
- pass defs found into the Makefile instead
- add parallel port enable to configure --enable-parallel vs. --enable-serial
- use code (partially contributed by yours truly anyway) from cwdaemon to add
parallel port support for *nix.
I've not tested parallel port operation, it should match what cwdaemon
does, which is convenient.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@113 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
all files previously using conf.h
- pass defs found into the Makefile instead
- add parallel port enable to configure --enable-parallel vs. --enable-serial
- use code (partially contributed by yours truly anyway) from cwdaemon to add
parallel port support for *nix.
I've not tested parallel port operation, it should match what cwdaemon
does, which is convenient.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@113 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
it was causing my grief with tx testing of OSS
- fixed configure to fill in just start_oss.c for AUDIO
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@110 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
it was causing my grief with tx testing of OSS
- fixed configure to fill in just start_oss.c for AUDIO
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@110 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
- cleaned up compiler warnings (added a few casts)
- transmit appears to work
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@108 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
- cleaned up compiler warnings (added a few casts)
- transmit appears to work
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@108 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
transmit not tested, I don't even know how to get the portaudio
version to transmit. ;-)
Works on receive just fine though.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@107 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
transmit not tested, I don't even know how to get the portaudio
version to transmit. ;-)
Works on receive just fine though.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@107 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Removed the two-buffer offset in fivehz.f90, it did not work right.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@104 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Removed the two-buffer offset in fivehz.f90, it did not work right.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@104 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
source files needed for the audio system chosen. Note in particular
a2d.f90 no longer needs to be wrapped with a #ifdef PORTAUDIO since
it is now only compiled and linked when needed.
Tested on portaudio here, but untested on alsa. Please test that
I have not screwed it up on alsa or windows. ;-)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@102 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
source files needed for the audio system chosen. Note in particular
a2d.f90 no longer needs to be wrapped with a #ifdef PORTAUDIO since
it is now only compiled and linked when needed.
Tested on portaudio here, but untested on alsa. Please test that
I have not screwed it up on alsa or windows. ;-)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@102 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
- split start_threads.c into start_alsa.c and start_portaudio.c
- make configure/Makefile add start_alsa or start_portaudio as needed
instead of start_threads
Untested on ALSA, works fine with PORTAUDIO
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@100 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
- split start_threads.c into start_alsa.c and start_portaudio.c
- make configure/Makefile add start_alsa or start_portaudio as needed
instead of start_threads
Untested on ALSA, works fine with PORTAUDIO
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@100 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Joe Taylor
Diane Bruce
J C Dutton