Commit Graph

134 Commits

Author SHA1 Message Date
Bill Somerville
5bf8ba4f55
Consistent behaviour with respect to prompt to log and auto log 2021-08-18 13:38:49 +01:00
Bill Somerville
37bbcbc7cf
Repair a long-standing defect with 72-bit modes message generation
This defect  caused source messages  to be incorrectly  generated when
using a compound callsign.

This repair  also fixes some  issues with  Q65 mode related  to source
message generation.
2021-06-27 16:45:33 +01:00
Joe Taylor
e3de62152d No need for m_s6 to be a member variable. Use a local s6 instead. 2021-06-10 16:34:05 -04:00
Joe Taylor
5492b82bde No need for m_nseq to be a member variable. Use a local nseq instead. 2021-06-10 16:30:03 -04:00
Joe Taylor
83758c40da Remove all remaining references to m_modeTx. We no longer support dual-mode operation, so it's not needed. 2021-06-10 15:20:36 -04:00
Joe Taylor
d3782d7d00 Correct the function name. 2021-05-31 16:19:29 -04:00
Joe Taylor
76de6ac299 Add MaxDrift tooltip. Add Quick-Start Guide for WSJT-X 2.5.0 & MAP65 3.0 to Help menu. 2021-05-31 16:07:49 -04:00
Bill Somerville
f3cb1d76c0
Repair a long standing defect with per band Tune & Tx power levels 2021-04-22 23:05:07 +01:00
Joe Taylor
314a506d51 Remove ISCAT mode. 2021-03-03 11:50:34 -05:00
Joe Taylor
b1c41932b1 Another try at keeping signal report constant within a QSO. 2021-02-06 13:01:28 -05:00
Joe Taylor
2f4cf2f406 Revert "Tentative fix to keep the transmitted signal report constant during a QSO. Please test!"
This reverts commit 70f460355b.
2021-02-06 12:12:20 -05:00
Joe Taylor
70f460355b Tentative fix to keep the transmitted signal report constant during a QSO. Please test! 2021-02-05 16:16:53 -05:00
Joe Taylor
1f9eeb52cc Add user option for Auto_Clear_Avg after a decode. 2021-01-15 14:12:52 -05:00
Joe Taylor
044aa80dc4 Remove all vestiges of the QRA64 mode. It has been replaced by Q65. 2020-12-21 15:07:53 -05:00
Bill Somerville
c9f9c1d7c8
Merge branch 'develop' into feat-fst280 2020-12-07 20:43:28 +00:00
Bill Somerville
60792182ad
Environment variables to set audio buffer sizes and fix Windows Rx timing
The two environment variables:

    WSJT_RX_AUDIO_BUFFER_FRAMES
    WSJT_TX_AUDIO_BUFFER_FRAMES

each can  be defined to  an integer number which  will be used  as the
suggested audio  buffer size for  Rx and Tx respectively.  Not setting
the variable  or setting  it to  zero or less  will cause  the default
buffer size to be used, which should be a good choice for most, if not
all, systems.
2020-12-07 20:34:56 +00:00
Bill Somerville
3d9a099fce
Reinstate changes that were reverted from commit df2daf6
Changes were moved aside to simplify a big merge commit with many
conflicts.
2020-12-07 00:18:52 +00:00
Bill Somerville
2964bc6295
Merge branch 'develop' into feat-fst280 2020-12-06 22:27:07 +00:00
Bill Somerville
f290cec93b
Revert "Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls."
This reverts commit df2daf60bd.
2020-12-06 17:51:06 +00:00
Bill Somerville
50d0543c03
Test version with environment variable to set Tx audio buffer size
WSJT_TX_AUDIO_BUFFER_FRAMES takes the following values:

 -1          - use Qt/system default
 0           - use 200 mS (WSJT-X default)
 +ve integer - value is number of frames at 48 kHz

-1 is  likely to  be a  good choice on  Windows and  may macOS.  0 has
proven to be good on Windows. On Linux  0 may be OK but we need to try
other values.

The value is only a hint, the  actual value used along with the period
size (the  size of each chunk  of samples requested by  the system) is
printed  in an  info level  diagnostic message  at the  start of  each
transmission.
2020-12-03 01:49:21 +00:00
Bill Somerville
3663b3ea32
MultiGeometryWidget template class abstracts window geometry changes 2020-11-27 01:14:12 +00:00
Joe Taylor
abe06e5dbb Access Q65 Quick-Start Guide from Help menu. 2020-11-17 10:46:20 -05:00
Joe Taylor
df2daf60bd Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls. 2020-11-16 10:06:10 -05:00
Bill Somerville
9ea903b259
Merge branch 'develop' into feat-boost-log 2020-11-12 13:36:25 +00:00
Bill Somerville
c7f2fdc404
Ensure Tx1 message is used by non-standard callsign holders
The only exception is type 2 prefix/suffix calls in non-77-bit modes.
2020-11-12 13:30:48 +00:00
Bill Somerville
ab780a324a
Testing options
Two new environment variables to control special testing behaviour:

    * WSJT_TX_BOTH - set to "1" to force transmission on both periods.

    * WSJT_REVERSE_DOPPLER - set to "1" to transpose Tx and Rx Doppler
      corrections. Use this to test Doppler tracking on a terrestrial
      link.
2020-11-06 18:28:59 +00:00
Joe Taylor
9b452e8f99 Change mode name QRA65 to Q65 everywhere, supposedly. 2020-10-25 13:58:18 -04:00
Bill Somerville
d8b16b31f4
Merge branch 'develop' into feat-boost-log 2020-10-13 19:20:37 +01:00
Bill Somerville
314be8ccb7
Merge branch 'develop' into feat-fst280 2020-10-06 19:25:06 +01:00
Bill Somerville
522000cfab
Added SWL Mode to View menu
SWL mode  hides all lower  panel widgets,  maximizing the size  of the
decodes windows.  Designed for operators running  several instances to
monitor multiple bands and modes.
2020-10-04 23:05:17 +01:00
Bill Somerville
f8e5903f83
Merge branch 'develop' into feat-boost-log 2020-10-04 22:47:01 +01:00
Bill Somerville
add63fb374
Adapt WSPRnet.org spotting to moveable Rx analysis window
This allows spots at any frequency to be posted rather than just those
in the 1400 to 1600 Hz range above the VFO dial frequency.
2020-10-04 22:41:52 +01:00
Bill Somerville
a169b5daf8
Added SWL Mode to View menu
SWL mode  hides all lower  panel widgets,  maximizing the size  of the
decodes windows.  Designed for operators running  several instances to
monitor multiple bands and modes.
2020-10-04 00:46:59 +01:00
Bill Somerville
837821b117
Merge branch 'develop' into feat-boost-log 2020-10-01 19:55:53 +01:00
Bill Somerville
204d63929d
Repair a regression with odd/2nd period FT4 decode timestamps
Generalized slow mode decode timestamp generation to a common routine.
2020-09-29 12:32:47 +01:00
Joe Taylor
7fd2f1afe6 Change QRA66 to QRA65, on the C++ side. 2020-09-25 13:20:46 -04:00
Bill Somerville
e50e712fdd
Start using class NonInheritingProcess 2020-09-24 17:57:06 +01:00
Joe Taylor
9fe2fc6de0 Fix two problems: sometime incorrect setting of RxFreq in WideGraph, and incorrect timestamp for FST4W-120 and FST4W-300 decodes in ALL.TXT. 2020-09-21 14:35:16 -04:00
Joe Taylor
52bdd57e57 Implement NB=-1%, NB=-2%. Fix a startup problem with WideGraps's fMax value. 2020-09-18 11:30:23 -04:00
Joe Taylor
2266e8dbb7 Add FLow and FHigh spinner controls to set the FST4 decoding range. 2020-09-16 17:02:40 -04:00
Bill Somerville
5fdcd8c15a
Merge branch 'develop' into feat-fst280 2020-09-11 20:06:20 +01:00
Joe Taylor
b6f990fac2 Allow FTol values down to 1 Hz; let maximum FTol values for FST4 depend on TRperiod. 2020-09-10 13:33:33 -04:00
Bill Somerville
db6a432a33
Ensure band/frequency combo box edit styling tracks current frequency 2020-09-08 15:24:55 +01:00
Joe Taylor
72cffc9da4 Make the FST4/FST4W Quick-Start Guide available from the Help menu. 2020-09-06 13:31:19 -04:00
Joe Taylor
4ab8780dd8 Code cleanyup associated with removing Tab 2. 2020-09-05 15:22:18 -04:00
Joe Taylor
7aeb9d5e2e Remove the "Tab 2" option for generating Tx messages. 2020-09-05 15:11:32 -04:00
Joe Taylor
c1025b7c4c Allow user to set center frequency and FTol in FST4W mode. Needs more testing! 2020-09-05 10:34:55 -04:00
Bill Somerville
4a2a181528
Merge branch 'develop' into feat-fst280 2020-08-17 18:33:00 +01:00
Bill Somerville
e17ad223ae
Tx Next button enables automatic Tx
Also a  number of WSPR/FST4W  code clean-ups including getting  the Tx
Next button to function as intended.
2020-08-15 02:57:23 +01:00
Bill Somerville
02e19b687f
Status message to report approximate # of dropped Rx audio frames
This is  a first cut  at this to  evaluate buffer size  adjustments on
supported platforms. A final version might limit status bar reports to
>1000 dropped frames or similar.
2020-08-08 17:12:48 +01:00