Commit Graph

20 Commits

Author SHA1 Message Date
Bill Somerville
3430648727 Reintegrate Joe's experimental VHF & up features
As at ^/branches/wsjtx_exp@5271



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5272 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-22 17:48:03 +00:00
Joe Taylor
93b729282b The "big FFTs" should be computed only once for each new set of Rx data.
This requires setting newdat=0 after the big FFT is computed.  In the OMP
code this must be done separately for each mode; so new variables newdat9 
and newdat65 have been defined.  Both are set to "newdat", the value
forwarded from the GUI, each time jt9[_omp][.exe] goes into action. 


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4946 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-08 15:07:31 +00:00
Bill Somerville
dba7f5b393 Use correct type for FFTW3 argument
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4944 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-08 11:10:28 +00:00
Bill Somerville
d42cf40268 Correct compile error
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4943 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-08 10:53:48 +00:00
Bill Somerville
8845f63792 Remove redundant copy of large array in JT9 decoder
Also moved  the same large array  from stack to heap  which along with
other prior  changes now allows  the Windows jt9 OpenMP  executable to
run with a default stack size again.

This also removes a crash on the Mac version which was probably due to
excessive stack usage.

Net result is an even faster JT9 decoder.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4942 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-08 09:53:20 +00:00
Joe Taylor
94911071be Some variables now need to be saved explicitly to maintain value
betweek subsoutine calls.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4939 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-06 15:18:38 +00:00
Joe Taylor
e35f8cc555 Make array sizes in downsam9 consistent with the new big FFT length.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4934 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-04 21:26:58 +00:00
Bill Somerville
43397b9580 Only use >1 thread for the biggest FFTs
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4933 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-04 20:52:42 +00:00
Bill Somerville
8d8d64c07c Thread safety enhancements to jt9
Serialize thread unsafe FFTW3 calls

Serialize FFTW3 plan initializations in four2a

Serialize decoder results output to file/console

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4928 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-04 01:41:26 +00:00
Joe Taylor
79a6ed5464 Further algorithmic tweaks in the JT9 decoder.
More detailed message to come, with comparative timing statistics.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4926 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-02 18:29:00 +00:00
Joe Taylor
7f70863caa Change some calls to timer().
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4921 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-01 20:11:10 +00:00
Joe Taylor
960da46d28 Many changes in program jt9[.exe] aimed at speeding up the decoders.
The long FFTs can now use the multi-threaded FFTW routines.
Subroutine decode9.f90 was renamed jt9fano.f90.
The JT9 decoder's top-level functions were removed from decoder.f90
and put into a separate subroutine decjt90.f90.
Subroutine decoder.f90 is now configured for possible use of OpenMP 
SECTIONS, with the JT9 and JT65 decoders running concurrently on
a multi-core machine.  Note, however, that this concurrent processing 
is not yet fully implemented.  Probably calls to timer need to be removed; 
some variables used in calls to jt65a and decjt9 may need to be 
declared PRIVATE in decoder; some sections probably need to be declared 
CRITICAL; probably some SAVE statements in downstream routines have
made them not thread-safe; etc., etc.  

I'm a neophyte at using OpenMP.  Comments, suggestions, and/or tests by
others will be welcome!



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4919 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-01 16:23:36 +00:00
Joe Taylor
1881cc1bb1 Add calls to timer().
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3470 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-09 16:22:25 +00:00
Joe Taylor
8fb483a200 Merging code for v1.1 back into the main wsjtx branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3462 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-08 13:17:22 +00:00
Joe Taylor
6339dc4b7e Many changes to the procedures for selecting decodable candidate JT9 signals.
This code may be the new benchmark?


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3274 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-16 16:02:00 +00:00
Joe Taylor
9ba06408b2 Temporary code, to aid with a series of tests of the JT9 decoder.
This commit will serve as a benchmark for comparison with new code to
be written.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3266 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-14 14:29:01 +00:00
Joe Taylor
695ce7b83e General code clean-up to eliminate compiler warnings.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3198 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-22 15:08:20 +00:00
Joe Taylor
faa6b9d7af Omitted a sqrt() by mistake.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2777 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-27 17:10:28 +00:00
Joe Taylor
f7c12d8390 Better way of estimating noise level for S/N measurements.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2776 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-27 16:48:50 +00:00
Joe Taylor
a7ea2745f2 Refactor the test9 routine into downsam9, peakdt9, symspec2, ...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2775 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-27 15:38:03 +00:00