Commit Graph

188 Commits

Author SHA1 Message Date
Joe Taylor
d4652ef0e5 More progress on FoxCalls...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8199 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-10-30 20:47:08 +00:00
Joe Taylor
b5b3ffbfbf Enable "nagain" for FT8, as in other modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7980 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-02 14:05:37 +00:00
Joe Taylor
e6635624f5 Make 72-bit "contest mode" available in FT8 as well as MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7969 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-28 15:50:13 +00:00
Bill Somerville
33b1742568 Add QSO state machine state and tx audio offset to parameters passed to slow decoders
Required to pick best AP masks in FT8 decoder

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7958 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-26 21:19:21 +00:00
Steven Franke
dc5305573d Move '?' quality warning to message(22:22).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7945 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-25 19:06:05 +00:00
Steven Franke
d06912a075 More informative end-of-line annotation for AP decodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7935 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-22 17:12:48 +00:00
Steven Franke
bbbcae9233 Add variables lapon and napwid to control ap decoding. Reconfigure the logic for AP decoding and ordered-statistics decoding.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7933 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-22 03:01:09 +00:00
Joe Taylor
73df0d00ef 1. Alt+F8 arms "Call 1st" as if a CQ had been sent.
2. "Call 1st" label turns red when armed to respond to a caller.
3. Suppress some recognizable false decodes, send them to cumulative file
   "data_dir/false_decodes.txt".
4. Reduce sleep delay in decoder() to 10 ms.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7928 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-20 15:15:00 +00:00
Steven Franke
4594aaa589 Work on ap decoding. Diagnostic write enabled.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7925 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-18 01:12:11 +00:00
Joe Taylor
a8cba435d4 Code cleanup and test ofFT8 decodes with erasures. Do not use on the air.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7879 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-14 16:02:01 +00:00
Steven Franke
1c2695332a Send mycall,hiscall,hisgrid into the ft8 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7797 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 20:00:42 +00:00
Joe Taylor
ab3832fa82 In ft8_downsample, compute long FFT only when data have changed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-03 19:52:36 +00:00
Bill Somerville
f73a35842a Reduce stack usage of F8 decoder modules
Reverted to default stack allocation for jt9.exe on Windows.

Tidied up FT8 decoder inteface  to remove arguments that will probably
never be used.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7768 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 18:46:14 +00:00
Joe Taylor
e20bd5eae1 Don't execute AutoSeq steps after sending a 73.
For FT8 mode:
  1. Open LU 13 in the proper way.
  2. Disable diagnostic LU 51.
  3. Add keyboard shortcuts CTRL+Plus, CTRL-Minus, to adjust audio Tx frequency
     in even 50 Hz steps.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7749 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-29 13:42:24 +00:00
Joe Taylor
80ad721524 Code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7742 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-27 20:50:17 +00:00
Joe Taylor
41336209c8 Rearrange some FT8 code for consistency with other modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7741 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-27 19:44:12 +00:00
Joe Taylor
91fbeff072 Many GUI adjustments for FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7736 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 15:24:56 +00:00
Joe Taylor
3ba80279ec Start a framework for FT8 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7727 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-17 15:55:30 +00:00
Joe Taylor
3c7e20b05b Better scheme for displaying QRA65 sync results.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7561 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-10 16:38:19 +00:00
Joe Taylor
f66d142963 Try up to three times to open 'decoded.txt".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7559 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-07 14:31:11 +00:00
Bill Somerville
cf97a23379 Temporarily disable the Tx/Rx transient suppressor introduced in r7424
This code was causing the JT9 decoder  to fail to decode, maybe due to
high  noise  levels  and  the resulting  discontinuity  introduced  by
zeroing out samples.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7555 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-27 02:22:54 +00:00
Joe Taylor
df35f519df 1. As a test, zap any data at start if id2() that appears to be a T/R transient.
2. Send emedelay (now 0 or 2.5) to QRA64 decoder.
3. Tweaks to sync64, making it better for QRA64A.
4. Mainwindow MessageBox if it attempts to open a file with wrong format.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 20:51:27 +00:00
Joe Taylor
ec7e099cf8 Further adjustments to sync64; extend QRA64 data length to 54 s; some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7414 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 21:27:23 +00:00
Joe Taylor
82ecc6afcf Correct the sending of minsync to decoder. Fix statement ordering that affects timer calls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7370 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-08 15:38:54 +00:00
Joe Taylor
f9a078dd8b Revert to displaying Nico's return code with QRA64 messages. Suppress a few false decodes that cannot be correct messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7342 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 15:11:00 +00:00
Joe Taylor
5da4ae6363 Set naptype properly; protect nap() index from out-of-range values.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7341 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 16:38:39 +00:00
Joe Taylor
4838d97370 New parameters for AP decoding in QRA64. Do not use this revision on the air!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7340 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 15:50:47 +00:00
Joe Taylor
869d62aae1 Change the indicator from 7 to 6: max number of AP bits is 68.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7337 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-23 12:40:48 +00:00
Joe Taylor
76e8f5ec85 In place of the qra64 return code as is, display a number that increases monotonically with the amount of a priori information used.
Here's the translation, as a lookup table.  The displayed number is the tens
digit of the number of a priori bits.

rc  APxx  displayed
-------------------
0     0      0
1    27      2
2    42      4
3    29      2
4    44      4
5    57      5
6    29      2
7    44      4
8    72      7
9    55      5
10   70      7
11   70      7



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7325 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-21 16:51:11 +00:00
Joe Taylor
72dfe01bf3 Working on QRA64 sync, snr estimates, etc., for QRA64 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7321 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-15 21:39:55 +00:00
Joe Taylor
a251c045e3 Rationalize several VHF-oriented features of the JT4 and JT64 decoders. More additions to the User Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7227 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 20:48:24 +00:00
Joe Taylor
87d4f2fdbc Use bVHF rather than single_decode to control display of params at end of decode line.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 15:25:25 +00:00
Joe Taylor
f5737348fe Good decode implies sync OK. Also some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6949 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-26 16:44:35 +00:00
Joe Taylor
77e295d36d Plot a red "sync" curve in QRA64 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6876 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-06 14:18:23 +00:00
Joe Taylor
63fa30b0b2 A few more renames, QRA65 --> QRA64.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6849 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 12:48:27 +00:00
Joe Taylor
bb1e8f6692 Minor tweaks to QRA sync handling.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6844 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 15:25:41 +00:00
Joe Taylor
e23017d9e3 Improving the QRA sync-detect algorithm.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6843 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 15:16:00 +00:00
Joe Taylor
0384d312a6 Temporary mode QRA02 is now basically functional (though buggy).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6833 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-30 20:38:36 +00:00
Joe Taylor
529ad6eec9 First functional decoder for QRA01.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6805 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-24 14:36:03 +00:00
Bill Somerville
5e7b750ac3 Initialize decode counts before decoding
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6750 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 23:39:19 +00:00
Joe Taylor
22340f66e4 Suppress some compiler warnings. (More to come...)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6748 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-09 19:39:48 +00:00
Joe Taylor
27fb2d8126 Minor cleanups and corrections to the JT4 and JT65 decoders when
using deep search and/or averaging.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6696 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-24 16:00:00 +00:00
Joe Taylor
4bcc4f35a1 Much improved detection of sync in JT4 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6686 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-19 19:19:47 +00:00
Joe Taylor
1531f3ad3b New format for end-of-line flags in JT4 and JT65; starting work on
establishing sync in JT4.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6685 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-19 16:13:51 +00:00
Joe Taylor
6bbfb0e1f1 Mark JT4 Fano decodes with 'f'.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6680 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-17 19:33:33 +00:00
Joe Taylor
f5cec462d4 Resolve more issues for display of JT4 decodes; improve JT4 sync at low spread.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6679 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-17 18:34:57 +00:00
Joe Taylor
f82ee7c4e3 Correct several VHF/UHF/Microwave items on Rex's list. Specifically:
1. Allow display of JT65 single-line decodes when there is also an
   average decode.
5. Do not call JT4 deep search if Fano decode has succeeded.
7. Fix occasional Fortran error seen with the "#" (nflip=-1) sync.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6678 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-17 17:19:27 +00:00
Bill Somerville
a45ea3cdff Adjust decodes displays and processing for extra csync indicator after mode
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6674 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-05 18:53:00 +00:00
Bill Somerville
8bced492e6 Remove premature inclusion of padding space character in JT9 decodes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6672 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-05 01:32:38 +00:00
Bill Somerville
e59af9a781 Strip out callback arguments that are constant and known to the callback implememtation
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6671 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-05-05 01:32:30 +00:00