Commit Graph

1352 Commits

Author SHA1 Message Date
Joe Taylor
51f42eee6c Patch from W9MDB: add even/odd shortcuts, make F1-F3 work when menus are hidden.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7803 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 13:08:48 +00:00
Joe Taylor
34070d107d Patches from G3WDG to ease use of single-tone messages in QRA64.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7801 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-07 12:38:16 +00:00
Joe Taylor
6a9ee81eec Correct the logic for hotkey CTRL+Key_Minus.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7798 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 20:28:12 +00:00
Joe Taylor
a728f045a2 Decodes at QSO freq to right window in FT8 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7795 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 19:21:55 +00:00
Joe Taylor
4f22923bbf Correct NSPS in the GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7791 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 16:27:22 +00:00
Joe Taylor
028e2ae2ba Extend FT8 Rx interval slightly.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7790 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 16:12:32 +00:00
Joe Taylor
aaeb59544c Add an FT8 warning message.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7785 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 13:59:31 +00:00
Joe Taylor
52d8324382 Baseline code with nsps=2048 in FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7783 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-06 12:07:17 +00:00
Joe Taylor
a65061cdde Correct the save/restore behavior of hiding menus and controls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7782 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-04 14:39:07 +00:00
Joe Taylor
e1b2bdef06 Fix a time delay introduced in refspectrum.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7778 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-03 15:21:38 +00:00
Joe Taylor
42ec06c9e1 Add checkBoxes to (potentially) replace the CTRL+M commands for minimizing window sizes. Suggestions for better positioning, etc, are welcome.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7769 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 19:05:52 +00:00
Joe Taylor
c61d328300 Remove a qDebug() flagging posts to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7758 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 13:37:29 +00:00
Bill Somerville
2687a308d6 Smarter Tx sequencing that allows for CAT processing latency
When using  split operating and/or rig  mode setting there is  a delay
before PTT  is asserted  while the CAT  commands are  processed. There
will even be  a small delay if  CAT is only used for  PTT. This change
waits for these  commands to be completed before starting  the user Tx
delay specified in the settings.

There is  a notable exception to  this in that DX  Lab Suite Commander
does not give us a way of knowing when CAT commands have actually been
completed.   This combined  with  the way  that  Commander spaces  CAT
commands, rather  than being paced  by the rig's CAT  responses, means
that delays of more than 1 second are likely. As most rigs suffer some
sort of ALC overshoot when PTT is asserted with audio already present,
it is strongly recommended not to use  the DX Lab Suite Commander as a
rig control proxy if your rig may  suffer ALC overshoot and you use an
external PA. Please note that using a typical RF power meter to detect
ALC  overshoots is  unwise  as  they are  rarely  fast  enough. It  is
probably wise to assume that all rigs suffer ALC overshoot since it is
very difficult to design an ALC loop that avoids it.

This change  also increases  the range of  the "Settings->Advanced->Tx
Delay" spin box to 0s up to 2s.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7756 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 00:19:58 +00:00
Joe Taylor
f6ecfec363 Add some timer calls; fix reporting of FT8 spots to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7755 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-30 20:11:07 +00:00
Joe Taylor
d94effcf41 Make FT8 available to all users, for testing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7750 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-29 15:16:02 +00:00
Joe Taylor
e20bd5eae1 Don't execute AutoSeq steps after sending a 73.
For FT8 mode:
  1. Open LU 13 in the proper way.
  2. Disable diagnostic LU 51.
  3. Add keyboard shortcuts CTRL+Plus, CTRL-Minus, to adjust audio Tx frequency
     in even 50 Hz steps.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7749 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-29 13:42:24 +00:00
Bill Somerville
7e77fb70bc Remove code that attempts to maintain on-air frequency for small QSYs
This feature is of limited  benefit and causes unexpected behaviour on
rigs with lower than 1Hz resolution. Removed for simplicity.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7743 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-28 01:54:35 +00:00
Joe Taylor
7e62880e2a More tweaks to GUI for FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7740 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-27 13:36:10 +00:00
Joe Taylor
023fceb620 Correct the displayed UTC for FT8 decodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7739 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 23:45:19 +00:00
Joe Taylor
8b6f3d8920 Fix behavior of RxFreq in FT8 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7738 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 19:33:26 +00:00
Joe Taylor
91fbeff072 Many GUI adjustments for FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7736 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 15:24:56 +00:00
Steven Franke
273e8de689 Restore normal Fast MSK144 transmission after toggling Fast box and/or after returning to MSK144 from FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-20 02:48:30 +00:00
Joe Taylor
5a9fdd1f34 Implement Tx for FT8. Not tested!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7730 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-19 20:38:03 +00:00
Joe Taylor
de3e975b98 1. ft8sim now generates 25 signals: f=300, 400, ... 2700 Hz.
2. ft8d is now a bare-bones multi-decoder.
3. wsjt-x now includes the bare-bones multi-decoder for FT8.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7729 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-19 20:15:43 +00:00
Joe Taylor
3ba80279ec Start a framework for FT8 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7727 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-17 15:55:30 +00:00
Joe Taylor
bb21ca949c Starting to insert FT8 into GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7726 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-17 13:48:45 +00:00
Joe Taylor
e53689b755 Back out the experimental changes of r7709.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7710 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-09 11:56:51 +00:00
Joe Taylor
b2873010cb Try making JT9C into a 15 s mode. Tx only is now implemented -- and not tested.
DO NOT USE ON THE AIR!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7709 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-08 19:54:37 +00:00
Joe Taylor
00719daac4 Working on a possible (and experimental!) slow MSK144 mode. *** DO NOT USE ON THE AIR! ***
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7707 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-07 19:58:25 +00:00
Bill Somerville
e6150df623 Proper custom spin boxes for frequency tolerance and T/R period
These were using a hijacked custom spin box that was designed only for
letters i.e. submodes. Now there are two new custom spin boxes.

HistedSpinBox:- can  be set with  a list  of integer values  which the
step  up and  down  will  follow. Optionally  limits  the maximum  and
minimum value  to the upper and  lower bounds of the  values set. Note
that intermediate values are still valid.

RestrictedSpinBox:- more like a combo  box because the provided values
are the only ones that can be set.

HintedSpinBox   is    used   for    the   frequency    tolerance   and
RestrictedSpinBox is used for T/R period.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7698 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-27 20:04:44 +00:00
Joe Taylor
bddcc32de0 Ensure correct text-window labels after changing mod4es.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7694 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-20 19:41:38 +00:00
Joe Taylor
9338cb52bb Correct the real-time filename being sent to wspr_fsk8d.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7693 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-19 15:52:48 +00:00
Joe Taylor
9e1a46f55d Fix the behavior of WSPR-LF (-fsk8) for real-time decoding.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7690 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 20:02:32 +00:00
Joe Taylor
9458acb01b Limit WSPR-LF frequency search range to 1600-1650 Hz. Enable S/N degradation.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7689 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 15:59:30 +00:00
Joe Taylor
fdad9be46d Fix an incorrect constant.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7688 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 02:21:39 +00:00
Bill Somerville
ed80f240e9 Add temporary simpler Tx scheduler for WSPR-LF
Until the advanced band hopping scheduler is upgraded to work with T/R
periods other  than 2  minutes this scheduler  uses a  strictly random
scheduler, except  that Tx percentages  less than 40 defer  Tx periods
that would otherwise be consecutive.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7687 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 01:52:30 +00:00
Joe Taylor
ec0278690c Fix the Tx duration in WSPR-LF (8-FSK) mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7685 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-17 14:43:16 +00:00
Joe Taylor
303eecdfd6 Make wspr_fsk8d search for DT as well as f0.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7681 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-17 13:13:11 +00:00
Bill Somerville
f7e8c81357 Prep for WSPR-LF tests.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7676 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-12 20:46:26 +00:00
Bill Somerville
503e8bca2d Fix "CQ NNN ..." with Tab 2 message scheme
More  to come  on this  but should  get Tab  2 basically  working with
MSK144 running from a calling frequency.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7675 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-12 20:46:19 +00:00
Joe Taylor
c6bd586d82 Implement (very basic) Rx capability for a potential WSPR-LF mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7673 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-12 14:39:38 +00:00
Joe Taylor
b3775f015a Implement Tx for WSPR-LF.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7670 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-11 19:56:18 +00:00
Bill Somerville
f7ff64bd6e Improve encapsulation and reliability of the wide graph 60m behaviour
The wide graph class handles 60m band behaviour of the minimum decoded
JT9 DF internally without leaking implementation details.

On 60m the lowest JT9 DF is always  zero and the spin box to set it is
disabled.  This reflects  that 60m  only has  narrow channels  and JT9
signals should share the same dial frequency as JT65 signals.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7668 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-07 15:14:42 +00:00
Joe Taylor
b256185ed1 Starting to implement experimental mode "WSPR-LF". Beware possible undesired side effects!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7658 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-04-28 16:49:09 +00:00
Joe Taylor
0673974954 Allow measuring refspec in fast modes. Better display format for phase coeffs.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7612 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-20 19:35:17 +00:00
Bill Somerville
8686876498 Do not use menu shortcut that hides shortcut key used in widgets
Ctrl+M (Cmd+M)  was being  used as  a menu shortcut  and in  key press
event  handlers   which  leads  to  inconsistent   behaviour  on  some
platforms. Removed menu action shortcut.

Also tidied up handling of the  hide controls menu action by making it
a checkable  action and using its  checked state to store  the control
hiding state.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7608 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-15 18:25:21 +00:00
Joe Taylor
5ff7b9ac79 Code cleanup following level meter changes. New screen shot for main-left controls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7597 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-06 15:52:09 +00:00
Joe Taylor
0e87c974e9 Modified behavior of audio level meter and adjacent slider; Tx6 at program startup.
1. Level meter range increased to 0-90 dB.
2. Level meter reading is independent of slider setting.
3. For a trial period: thermometer bar goes red if a 16-bit sample
   is within 5 dB A/D limit.
4. Slider can be used to adjust levels sent to waterfall.
5. Tx6 message is selected on program startup.
Thanks to W9MDB for most of this code.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7596 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-06 14:34:25 +00:00
Joe Taylor
220f03c7be When operating in JT9+JT65 mode, changing band to 60 m has moved the
"JT65 nnnn JT9" blue line to 0 Hz.  Now it also moves the spinner to
0 Hz, as it should have done.  Subsequent QSY to another band will reset
the blue line and spinner to where they had been, before the QSY to 60 m.
Thanks to W9MDB for this patch.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7595 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-03 15:11:32 +00:00
Bill Somerville
ab3f3f43e4 GNU gcc/g++ v6.x and Qt v5.8.x compatibility
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7588 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-28 19:13:49 +00:00
Bill Somerville
2131414791 Add reference spectrum to equalization plots and more plotting enhancements
Use  a header  format for  polynomial coefficients  that includes  the
valid  X  range  in  scaled  terms  and  a  count  of  the  number  of
coefficients.

Use double  precision consistently  for polynomial  coefficients. This
includes formatting with sufficient DPs when writing to files.

Many changes to the equalization plots, more to come.

Add  error   handling  for   reading  coefficient,  plot   and  filter
files.  This  includes  being  backward  compatible  for  old  format
refspec.dat files with no header.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7578 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-23 16:21:26 +00:00
Bill Somerville
cecc098924 First attempt at a UI phase compensation tool for MSK144
This builds on the static phase compensation in the MSK144 decoder and
the phase  analysis and  polynomial fitting  capabilities also  in teh
MSK144 decoder,  by allowing  captured data to  be selected  for phase
equalization from the WSJT-X UI.

Reads  captured phase  compensation  curve  estimate files  containing
fitted  polynomial coefficients  and measured  phase data  from MSK144
receptions. Intent  is to select a  compensation curve that is  from a
known transmitter like  an SDR which have good  phase linearity. Phase
plots and compensation polynomials may be viewed and compared with the
current compensation polynomial. A  suitable polynomial can be applied
to be use in all further decoding of MSK144 signals.

Plots of  the currently  selected polynomial  and its  modified higher
order terms  polynomial which is  actually used in  equalization (this
plot may  be dropped - it  is just for  kicks at the moment).   When a
captured phase analysis file is loaded plots of the measured phase and
the proposed best fit polynomial are shown.

Basic  maintenance  is also  included  allowing  clearing and  loading
captured  plots and  an option  to revert  to a  flat no  equalization
curve.

More to come on this as  amplitude equalization is also possible, this
will probably  be similar, maybe even  plotted on the same  graph with
dual  axes  for phase  and  amplitude.   Amplitude correction  from  a
measured  reference   spectrum  could  be  viewed   and  selected  for
equalization for all modes. TBC...

This   change    also   introduces    the   QCustomPlot    3rd   party
widget. Currently this  is statically linked from a  qcp library built
by the WSJT-X CMake script. This will probably be migrated to a shared
object (DLL) build as a CMake external project, once some CMake script
re-factoring  has been  completed,  which  is more  in  line with  the
QCustomPlot author's  intentions. This  will allow efficient  reuse in
other tools shipped with WSJT-X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7570 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-21 02:13:13 +00:00
Joe Taylor
3c7e20b05b Better scheme for displaying QRA65 sync results.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7561 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-10 16:38:19 +00:00
Joe Taylor
bbe3cf9805 When logging, enforce QSO stop time >= start time.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7552 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-22 20:38:10 +00:00
Steven Franke
e45f7eaf67 After measuring phase response, write pcoeff file to the data directory.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7551 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-22 03:20:46 +00:00
Steven Franke
2644efc699 More work on Phase Equalization interface.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7506 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 22:13:59 +00:00
Steven Franke
c3d83a207a First steps to enable user control of phase calibration.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7504 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 21:43:40 +00:00
Bill Somerville
18a80232cc Filter general working frequencies in FreqCal mode
Allow band  drop down list to  be used to select  FreqCal frequencies,
also  resets position  in automatic  cycle. Tidy  up some  unnecessary
code.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7486 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-12 21:03:30 +00:00
Joe Taylor
247aa1a2ee Several changes to operational logic for FreqCal mode.
1. Menu item *Tools -> Execute frequency calibration cycle* is renamed and checkable.  Cycling does not start until checked.
2. Ctrl+F10 now allows you to cycle manually through the list of calibration frequencies.
3. Calibration sequence lengths can be set to 5, 10, 15, or 30 s with the sbTR spinBox.

Also: don't set sbTR index to 0 when entering a slow mode.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7485 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-12 18:21:58 +00:00
Bill Somerville
1009d87ab4 Do not do FreqCal calculations on period when rig changes frequency
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7471 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-10 01:39:27 +00:00
Bill Somerville
fb2592453d Ensure that startup in FreqCal mode selects the first monitoring frequency
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7469 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-09 22:54:40 +00:00
Bill Somerville
f75c36c2ce Skip all mode working frequencies in FreqCal mode
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7468 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-09 22:54:32 +00:00
Bill Somerville
105aa045b3 Tidy up FreqCal mode time signal switching and Rx DF
Rx  DF is  now  "real-time"  adjusting the  rig  in  concert with  the
monitored DF.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-09 13:50:02 +00:00
Bill Somerville
5b62f118c6 Remove some unnecessary code
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7464 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-09 01:09:58 +00:00
Bill Somerville
ea507b6ec8 Use the settings frequency list as a source for cal frequencies
Some default time  signals have been added to the  frequency list so a
base  set   can  be   obtained  by   resetting  the   frequency  list,
alternatively they can be added ad hoc in the normal fashion.

FreqCal  mode behavior  is to  select  the lowest  cal frequency  upon
entering  FreqCal   mode  and  cycling  through   each  cal  frequency
repeatedly. Ctrl+F10 jumps directly to the next higher frequency.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7463 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-08 23:58:09 +00:00
Joe Taylor
2698fc02c6 Re Sh and SWL: allow either or neither, but not both.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7459 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 19:01:29 +00:00
Bill Somerville
9ea25dec8d Tidy up decode menu actions and correct defect in logic
Deepest decode  level should be selected  automatically when switching
to JT4  or JT65 when VHF  & up mode is  on and either of  averaging or
deep search are enabled.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7456 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-06 13:53:06 +00:00
Joe Taylor
62f5447520 First usable-at-K1JT version of a semi-automated Frequency Calibration routine.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7452 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 20:20:43 +00:00
Joe Taylor
6d64eaa37b More work on FreqCal mode. Some of this code is temporary!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7451 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-05 18:35:26 +00:00
Joe Taylor
6d3ca346e0 Further progress toward a usable "FreqCal" (Frequency Calibration) mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7448 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-04 19:07:35 +00:00
Joe Taylor
dbeb21b050 Some possibly temporary ideas, playing around with a "FreqCal" mode to do simple frequency calibrations.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7446 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-03 21:37:38 +00:00
Joe Taylor
a65ebafd48 1. We did the experiment: users clearly prefer a "Prompt to log QSO"
only when 73 is sent.  Revert to that well-established behavior.
2. Correct the logic that detects short-form RO, RRR, and 73 messages in
JT65 VHF modes and color-highlights the Tx message box.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7442 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-02 14:22:29 +00:00
Joe Taylor
8fcda35808 Remove a diagnostic.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7435 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-31 02:51:33 +00:00
Steven Franke
077ac1d77b Progress toward SWL capability. Not finished and not tested.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7434 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-31 02:05:51 +00:00
Joe Taylor
33628fd9f4 1. Starting to add SWL feature for MSK144 Sh messages.
2. Add (part of) a geometry patch from W9MDB.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7433 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 21:46:29 +00:00
Steven Franke
2c2d31ea8d Remove some dead code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7432 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 20:26:59 +00:00
Joe Taylor
f30311f324 I throw in the towel. Prompt to log QSO when *either* RRR or 73 is sent.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7431 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 19:04:51 +00:00
Joe Taylor
f98aa4e6f4 Options (via Ctrl+M) to minimize size of Main Window and Wide Graph; add separate Start/End times to logging information. Thanks to W9MDB!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7430 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 15:45:31 +00:00
Joe Taylor
b7309f1d36 1. No 2 kHz frequency offset for JT9 on 60m band.
2. Don't update the "Last Tx" message until current transmission is complete.
These suggestions from W9MDB.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7429 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-29 18:08:32 +00:00
Joe Taylor
d2fb561f10 Add "Clear reference spectrum" to the File menu.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7426 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-24 20:05:28 +00:00
Joe Taylor
df35f519df 1. As a test, zap any data at start if id2() that appears to be a T/R transient.
2. Send emedelay (now 0 or 2.5) to QRA64 decoder.
3. Tweaks to sync64, making it better for QRA64A.
4. Mainwindow MessageBox if it attempts to open a file with wrong format.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 20:51:27 +00:00
Steven Franke
02a4cb95a4 Add an option on advanced time to enable MSK144 Rx filter equalizer. Other changes necessary to accommodate coexistence of static (Rx Filter) and dynamic (QSO partner-dependent) phase corrections.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7421 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 17:21:23 +00:00
Joe Taylor
80e594d7b8 Back out the temporary changes for WSPR-15 in r7418 and 7419.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7420 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 14:24:56 +00:00
Joe Taylor
9e97dcf942 Allow WPR-15 Tx audio freq up to 1625 Hz.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7419 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 20:31:30 +00:00
Joe Taylor
b0e738b1f2 Test code: starting to implement WSPR-15. Not for general use!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7418 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 20:26:49 +00:00
Joe Taylor
344936a315 No need to truncate the decoded text line going to ALL.TXT.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7415 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 21:35:16 +00:00
Joe Taylor
d98253f3c8 Enable Sh (for Tx4 and Tx5 only) in MSK144 Contest Mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7397 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-18 18:31:48 +00:00
Joe Taylor
a125657803 If status of Contest Mode is changed, re-generate the standard MSK144 messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7394 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-17 21:48:14 +00:00
Joe Taylor
33af88a41b Complete the implementation of MSK144 contest mode. Needs testing!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7393 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-17 21:18:47 +00:00
Joe Taylor
e23ebc48ad Don't freeze the Tx5 message if use has double-clicked on a decode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7392 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-17 15:19:48 +00:00
Bill Somerville
336eb0c858 Add fast mode support to UDP messages and update example apllications
Sub mode and  fast mode flag are  added to the UDP  Status message and
Status messages  after appropriate UI changes.  MSK144 decodes produce
UDP Decode messages. Fast JT9 messages are treated similarly.

Currently ISCAT decodes are not posted  as UDP Decode messages as they
do not fit well with the model.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7389 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-16 19:36:21 +00:00
Joe Taylor
1de0689d4b Another tweak to User Guide. Disable Deep Search and Averaging if VHF features is turned off.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7387 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-16 17:14:00 +00:00
Joe Taylor
3b1e9c1e6c Extend the Rx period in QRA64 mode to 53.5 s; an improved label on Settings -> General tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7385 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-16 16:25:07 +00:00
Joe Taylor
8ff9cb01b2 Remove JT9/JT65 decoding statistics from timer.out. Remove the auto_tx_label, it's not really needed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7383 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-15 18:58:17 +00:00
Joe Taylor
e21f69b5e9 Make the setting of *Enable AP for DX call* persistent.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7375 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-09 21:06:26 +00:00
Joe Taylor
82ecc6afcf Correct the sending of minsync to decoder. Fix statement ordering that affects timer calls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7370 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-08 15:38:54 +00:00
Bill Somerville
bae3b94fd6 Build a cache of allowed SSL exceptions and use them on future network requests
The   class  NetworkAccessManager   sub-classes  QNetworkAccessManager
adding  a  message  box  to  ask   the  user  if  SSL  errors  may  be
ignored. Ignored errors  are ignored in future server  replies so that
the user is not asked about he same peer certificate chain repeatedly.
The cache is currently per process only and not persistent.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7361 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-04 14:17:01 +00:00
Bill Somerville
2255b17e91 Add version and revision information to UDP heartbeat messages
Updated  UDP examples  to show  the version  and revision  information
received from clients.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7358 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-04 00:55:15 +00:00
Bill Somerville
ac859c8f68 Several rig control enhancements and fixes
Use the  new DX Lab Suite  Commander command option to  stop Commander
trying to change the rig Tx VFO mode when we don't want to. Requires a
recent DX Lab Suite Commander version.

All rig controllers  can now detect 20Hz resolution  rigs, still needs
2Hz resolution code which will be needed for the FT-891 AFAIK.

Enhance  the HRD  interface  to be  able to  use  the alternative  PTT
command as found on most Kenwood  rigs for audio source selection. Fix
Icom data mode selection issues.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7357 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-04 00:55:07 +00:00
Bill Somerville
fed0e9e171 Make handling of special CQ messages consistent
CQ NNN ... and CQ aa ... are  coalesced to CQ_NNN ... and CQ_aa ... so
as to keep the word count and indexes consistent with plain CQ ..., DE
... and QRZ ... standard message forms when parsing messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7356 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-04 00:54:58 +00:00
Joe Taylor
d972375792 Permit use of "CQ nnn" and AutoSeq in fast JT9 submodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7345 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 19:34:52 +00:00
Joe Taylor
8cf4fd2f8e No longer any need for the checkbox labeled "Rx frequency offset with CQ nnn" on the Settings -> General tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7343 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 16:20:57 +00:00
Joe Taylor
4838d97370 New parameters for AP decoding in QRA64. Do not use this revision on the air!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7340 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 15:50:47 +00:00
Bill Somerville
840163ab97 Change the "CQ nnn ..." logic to specify the calling frequency...
... rather than the working frequency.

Users set their working frequency and specify a calling frequency as a
kHz offset  into the  current Rx  MHz with the  main window  spin box.
Calling CQ on  the specified calling frequency is  enabled by checking
the associated option.

Also enhanced  the auto  sequencing to handle  short code  73 messages
correctly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7339 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 01:34:43 +00:00
Joe Taylor
0ae13699df Allow double-clicking in JTAlert to start a QSO. Please test!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7336 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-23 00:42:23 +00:00
Joe Taylor
d53085b552 Correct a flaw that could cause Tx to start as a result of a decode with AutoSeq active.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7329 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-22 15:47:59 +00:00
Joe Taylor
14d44f483b Display "OOO" at end of Tx message in status bar. Correct the logic for regenerating standard messages when "Enable VHF features" is changed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7324 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-21 15:46:17 +00:00
Joe Taylor
c8d7421ead Don't allow CW ID to extend Tx stop time beyond normal sequence boundary.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7323 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-19 18:28:14 +00:00
Bill Somerville
d416a0f5b4 Reset rig if it is found to be inactive
One reason  for inactivity is  that a calibration adjustment  has been
made.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7320 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 21:17:28 +00:00
Joe Taylor
2d3a96b009 Use ISO 8601 format for Date/Time in ALL.TXT.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7312 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 15:29:38 +00:00
Joe Taylor
8b7a7e795d After double-click on CQ message, don't change audio Tx freq if VHF features enabled. Temporarily(?), list Rx, Tx, and Calling freqs in Status Bar.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7311 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 15:00:15 +00:00
Joe Taylor
8e1378bce3 If Monitor was OFF at start of band_changed(), return it to OFF when this function returns.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7306 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-13 20:28:53 +00:00
Joe Taylor
80787c0721 New sync pattern for QRA64; implement fast-fading algorithm for QRA64A-C. Several things in QRA64 still need attention, in addition to submodes D and E!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7301 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-08 20:11:02 +00:00
Joe Taylor
026b9a3916 Correct a flaw in behavior of "Lock Tx=Rx" (Tnx to VK4EME). CR in DXCall entry ==> do "Lookup" (Tnx to W9MDB).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7297 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-07 13:47:09 +00:00
Bill Somerville
5152778813 Allow for new directional CQ messages in message processing
Also relax entry validation so it  is easier to enter standard message
forms longer than 13 characters into message entry line edits.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7294 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-05 19:41:03 +00:00
Bill Somerville
dc62eb04ad Increase the OpenMP stack size limit for jt9 threads from 2Mbyte to 4Mbyte
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7293 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-05 00:39:09 +00:00
Joe Taylor
cdaa64324a Add warning message if VHF features enabled on a lower band. Clean up "Decoded Lines" table in User Guide, and corresponding ISCAT end-of-line characters.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7283 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-03 14:05:05 +00:00
Joe Taylor
0f10da8e0e Reactivate the "Reference spectrum saved" message box.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7280 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-02 17:57:25 +00:00
Joe Taylor
744a82346e Fix UTC wrap-around problem with timing of CW ID. Fix WSPR label mi/km.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7276 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-02 12:38:18 +00:00
Joe Taylor
e0f80b7afc Correct a flaw in deep4 (apparently caused by gfortran optimizer?). Move
display of the "No More Files..." message until after the "Decode Finished"
message is received.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7270 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-31 14:24:02 +00:00
Joe Taylor
854d1287e4 I think this is better logic for enabling/disabling the checkbox that enables "CQ Rx nnn". Please check!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7269 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-30 23:52:25 +00:00
Joe Taylor
bc32b6a6ff Correct a bug that could switch to a JT65 shorthand message if Tx5 window
is edited to (say) "73 ...".


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7267 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-30 21:38:52 +00:00
Bill Somerville
cfb1a3cbe2 Use Qt signals to process configuration name changes
This change maintains the encapsulation  of the MultiSettings class by
using  a  signal   to  notify  clients  of  changes   to  the  current
configuration name.

Modifications  to   the  MainWindow  class  to   display  the  current
configuration name in the status bar, if it is not "Default", based on
MultiSettings events rather than polling for changes.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7257 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-28 17:15:04 +00:00
Joe Taylor
5fb0b05198 Fic label_7 for MSK144. User guide updates.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7256 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-28 15:33:56 +00:00
Joe Taylor
0c0e3ec978 Add a status bar label for configuration name (if other than "Default").
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7252 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-28 14:33:00 +00:00
Joe Taylor
bc1ffa6839 Remove more diagnostic prints.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7244 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 19:13:18 +00:00
Joe Taylor
da6c803e89 Remove diagnostic print.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7243 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 19:02:43 +00:00
Joe Taylor
a0d27d23f7 Introduce a 1-second delay before starting wsprd. (There is probably a better
way to make sure that the new .wav file is ready, before starting wsprd?)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7242 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 19:01:46 +00:00
Joe Taylor
1928850813 Correct some values of the m_hsymStop.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7236 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 16:11:21 +00:00
Joe Taylor
e7237a0fa4 Prevents auto power tune from resetting attenuation to 0 by default.
Fix autotune for tx pwr on band changes to keep current level if never set.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7233 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-25 22:49:20 +00:00
Joe Taylor
dcf8521c18 Minor tweaks to MDB patch and User Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7232 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-25 21:15:12 +00:00
Joe Taylor
0441986ccc Add the W9MDB patch (very slightly modified) for band-by-band memory
of power settings for Transmit and Tune.  Also an interim update of
v1.7_Features.txt.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7229 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-25 20:24:09 +00:00
Joe Taylor
a251c045e3 Rationalize several VHF-oriented features of the JT4 and JT64 decoders. More additions to the User Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7227 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 20:48:24 +00:00
Joe Taylor
e4d10d4f19 Clarify what VHF-enabled JT65 messages get sent to the right window.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7226 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 17:01:47 +00:00
Joe Taylor
87d4f2fdbc Use bVHF rather than single_decode to control display of params at end of decode line.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 15:25:25 +00:00
Joe Taylor
5b47bbf22e Don't display dupes in JT65, even if minsync<0. Use VHFfeatures rather than single_decode to control display of Tol, etc., in plotter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7224 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 14:56:14 +00:00
Joe Taylor
c1d5531603 For now, we'll allow click-to-decode in ISCAT mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7218 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-21 18:07:12 +00:00
Joe Taylor
0388eb2cf3 Fix the display/hiding of decodedTextBrowser2 and dexpdedTextLabel2 wrt ISCAT.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7214 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-21 16:29:09 +00:00
Joe Taylor
d964805c85 Include four more items in the "displayWidgets" list.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7212 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-21 15:32:05 +00:00
Joe Taylor
f698c7b77d Correct the "warbling" Echo tone after doing a JT9-fast transmission.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7211 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-21 14:23:06 +00:00
Joe Taylor
91ea5ffa08 Major refactoring of code that determines visibility of GUI controls. Please report any undesired or incorrect behavior!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7209 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-20 19:25:48 +00:00
Joe Taylor
c2d2ec8dd7 Remove vestigial references to WSPR_2. Update wsjtx.pro. Add samples for all modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7208 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-20 15:43:03 +00:00
Joe Taylor
78840744cb Replace commented-out frequency-setting statement. Make sure that RxFreqSpinBox is visible in JT4 mode,
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7207 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-20 13:16:58 +00:00
Joe Taylor
ec2c5b78d4 correct a flaw in "Decode remaining files in directory"; correct the widget visibility in ISCAT mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7201 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-19 18:09:27 +00:00
Joe Taylor
8c34a664e7 Fix the faulty logic in test for "No more files to open".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7200 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-19 13:45:59 +00:00
Joe Taylor
fe920efb6f When auto-sequencing, don't call GenStdMsgs if we're already sending 73.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7193 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-17 17:58:05 +00:00
Joe Taylor
01c4e9eb1d Remove some no-longer-needed code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7192 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-17 16:57:04 +00:00
Joe Taylor
5da7e84f54 Correct a timing issue for saving MSK144 files in short (e.g. 5 s) sequences. Save after Alt-V even if Save = None.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7191 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-17 16:51:14 +00:00
Joe Taylor
213f8fabe9 Retain selected T/R sequence length when returning to MSK144 mode. Blank the right-text-window label in ISCAT mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7190 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-17 15:24:22 +00:00
Joe Taylor
d80f128a8a Decode button now does nothing in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7189 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-17 14:35:59 +00:00
Joe Taylor
bf068fc6fd Re-enable "Save decoded". In fast modes, we no longer save all files and
delete some later.  Rather, we save only those with real-time decodes (or
we save all).


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7188 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-17 13:28:30 +00:00
Joe Taylor
ab400f7a9f No bounds-check for Release build; increase Windows stack size, again; some fixes for ISCAT mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7186 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-16 17:36:00 +00:00
Joe Taylor
efaa814ef6 Make CQ nnn widger wider; enable CQ nnn checkbox only if Split is active; make CQ nnn available to all users.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7185 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-15 13:23:40 +00:00
Joe Taylor
6d9ab6385c Many updates to User Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7182 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-14 15:12:36 +00:00
Joe Taylor
d7b439a1e7 Change "WSPR-2" to "WSPR" everywhere; update some WSPR labels.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7181 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-14 14:15:34 +00:00
Joe Taylor
7ccef46ba0 Fix the broken "click-on-callsign" logic.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7178 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 21:32:30 +00:00
Joe Taylor
06ddf3c4f6 Sh and Tx6 checkboxes should be invisible if VHF not enabled.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7176 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 20:28:02 +00:00
Joe Taylor
f670825d84 1. Display "best of N" rather than "average of N" in Wide Graph waterfall.
2. More fixes of widget visibilities.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7175 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 19:20:24 +00:00
Joe Taylor
328144f4fe For now, disable "Save Decoded".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7174 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 18:14:20 +00:00
Joe Taylor
a3410b1e02 Display Hot A/B and El in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7173 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 18:02:44 +00:00
Joe Taylor
443cbe1794 Switching VHF off in JT9 mode should make the submode spinner invisible.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7171 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 16:39:16 +00:00
Joe Taylor
1cc278cce6 1. Enable CW ID for fast modes.
2. Correct several more flaws in making GUI controls visible or invisible.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7170 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 16:19:24 +00:00
Joe Taylor
19a25a42ff Fix the bug connected with setting start of yellow click-to-decode line in Fast Graph.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7169 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 18:34:38 +00:00
Joe Taylor
995fcf5359 1. Gray-out "Include averaging" and "Include Deep Search" if not in JT4 or JT65 mode.
2. Make the "MSK144 Realtime decode" checkbox invisible, in preparation for removing it entirely.
3. Always use RealTime decoding in MSK144 mode.  (For now, at least, click-to-decode works as before.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7168 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 18:21:45 +00:00
Joe Taylor
f7ac6a732f Correct a flaw in display logic for cbFast9. Enable JT9-Fast decoding when MSK144 real-time decode is checked.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7166 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 17:09:36 +00:00
Joe Taylor
823b018592 Trying to make position and status of the central GUI controls correct and logical for VHF and non-VHF usage.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7165 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 16:33:18 +00:00
Joe Taylor
daf56b5186 Failed to save before commit. Fixed now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7162 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-07 17:52:48 +00:00
Joe Taylor
15eb4e2796 Adjust the handling of "Save Decoded". (It is correct, yet,for all cases?)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7161 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-07 16:51:50 +00:00
Joe Taylor
a8210b69ba Information message when list of files to open has been exhausted.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7160 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-07 16:35:34 +00:00
Joe Taylor
b1d53e1fad Fast modes: all decodes should go to ALL.TXT. MAK144: label the right text window "QSO Messages".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7157 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-07 15:23:37 +00:00
Joe Taylor
eebcdcd42a git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7155 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 2016-10-06 18:56:16 +00:00
Joe Taylor
ff25140273 git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7154 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 2016-10-06 18:55:11 +00:00
Joe Taylor
216259c71f Tx2 should use full calls, even with "Sh" checked in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7152 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-05 14:20:25 +00:00
Joe Taylor
bda40d5c5d Send MyCall, HisCall, and state of Sh checkbox to mskrtd, to enable MSK144 Sh messages with the realtime decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7150 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-04 14:01:02 +00:00
Joe Taylor
68e03f6c4e Another attempt to get both m_rptRcvd sent to log and valid spot sent to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7147 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 22:52:01 +00:00
Joe Taylor
6dcdee836e Further speed improvements for MSK144 RT decoding. Fiz what I broke in the "click-on-CQ-message" logic.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7144 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 17:08:02 +00:00
Joe Taylor
4895b5f8ba More complete definition of CPU usage for MSK144 RT decoding. Speed is back
to that of r7139.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 13:48:30 +00:00
Steven Franke
78652121fa MSK144 should auto sequence only when the box is checked.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7142 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 01:20:15 +00:00
Joe Taylor
eeac94e361 Don't send decodes from disk data to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7141 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 23:41:41 +00:00
Joe Taylor
672a4e88b5 MSK144 mode: minimum Ftol=20; report received copied to Log screen; spots sent to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7140 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 23:16:47 +00:00
Steven Franke
58b331b36b Make RxFreq step size 10 Hz in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7138 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 01:14:35 +00:00
Steven Franke
0173ea4d6d 1. Initialize m_msg[0][0] to stop garbage decode right after startup. 2. Decouple RxFreq spinbox from printed/decoded frequency. 3. Limit RxFreq to 25 Hz steps in the range [1400,1600] when in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7137 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 00:23:09 +00:00
Joe Taylor
8dc2fef844 Back out some changes that were broken. PSK reporter not yet functional for MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7136 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 20:10:46 +00:00
Joe Taylor
23785f60e4 Oops! Committed wrong versions. This code is not ready for use!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7135 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 19:40:26 +00:00
Joe Taylor
02ef8823ef 1. Allow Ftol down to 20 Hz in MSK144 mode.
2. Do not adjust Rx Freq automatically after an MSK144 decode.
3. Insert the Rcvd report in log window.
4. Send MSK144 decodes to PSK Reporter.

NB: not all these are fully tested, yet.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7134 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 19:32:16 +00:00
Steven Franke
4fe86cef1e Try to squash double-decodes and gibberish prints.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7133 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 18:13:39 +00:00
Joe Taylor
2ba4865d84 This should have been committed with r7121.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7125 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 15:55:53 +00:00
Joe Taylor
bee5ea4c71 Minor cleanup; add some !$OMP stuff to msk144sync.f90, but it's not yet functional.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7119 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 16:39:14 +00:00
Joe Taylor
cd0895c26a Add a performance monitor for real-time MSK144 decoding.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7116 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 13:29:20 +00:00
Joe Taylor
57a5ad188d Send ndepth (value = 1, 2, or 3) to hspec(). MSK144 click-to-decode now calls
the old fast_decode(); probably it should call hspec() instead?


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7113 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 20:41:41 +00:00
Joe Taylor
6579b93690 Progress toward full implementation of real-time decoding of MSK144.
I believe file saving and auto-sequencing nor work.  Not sure about posting
to PSK reporter: please check.  


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7112 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 19:08:19 +00:00
Steven Franke
f210e47cd5 MSK144:
1. Clean up mskrtd to remove unused variables.
2. Re-instate Rx frequency spinbox in MSK144 mode to allow decoding of off-frequency signals with small FTol. Make changes needed to pass Rx Freq in to fortran routines. 
3. Enable realtime decoder for testing. Auto sequence does not yet work when realtime decoding is enabled. There are probably other bugs as well.




git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 00:16:29 +00:00
Steven Franke
3df371f11b New short ping decoding algorithm for msk144 realtime decoder. Not yet enabled.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7108 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-23 22:28:11 +00:00
Joe Taylor
3b97ae7417 Implement real-time decoding in MSK144 mode, for testing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:25:25 +00:00
Joe Taylor
68be179f34 Reconfigure mainwindow GUI properly after MSK144 -> WSPR -> MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7093 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 15:32:01 +00:00
Joe Taylor
c4d00b0f47 1. Display proper UTC on Fast Graph for files read from disk.
2. Move cursor DT readout to lower left of top panel.
3. More work on pick-decodes... but it's not yet fully working.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7092 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 13:34:40 +00:00
Joe Taylor
b15e3aed04 when TRperiod < 30 s, expand the Fast Graph scale so full width is 15 s.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7089 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-16 14:18:40 +00:00
Joe Taylor
c8d795df0a Increase range of report spinbox in MSK144 to -8 --> +24 dB. Limit the yellow click-to-decode bar to max at TRperiod.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7084 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-15 17:06:49 +00:00
Joe Taylor
3b93cd02b6 Spinners fopr Rx Freq and Tx Freq should not have been made visible in MSK144 mode; they are ignored in this mode, as present.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7080 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 21:20:16 +00:00
Joe Taylor
13ffbb20eb Remove JTMSK mode and all related routines. Beware of possible unintended side effects!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7079 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 17:52:45 +00:00