Bill Somerville
22f66795a1
Improved C/Fortran string interoperation, and fix azel.dat updates
...
The azel.dat file is no longer written with future Doppler correction
information designed for rigs that can't do CAT QSY commands while
transmitting.
2020-07-20 15:15:55 +01:00
Bill Somerville
731dfc5c6f
Qt 5.15 compatibility
2020-07-19 21:09:52 +01:00
Joe Taylor
6a4f1fbdf7
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-19 13:21:45 -04:00
Joe Taylor
159b8a97f7
Better handling of fSpread in mainwindow.cpp. Makes auto-seq work when plotspec is used.
2020-07-19 13:20:41 -04:00
Bill Somerville
58fc82e178
Correct standard message generation for FST240
2020-07-19 12:31:10 +01:00
Joe Taylor
7fa7b0dda9
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-18 13:57:08 -04:00
Joe Taylor
4fa9557272
Add end-of-Rx-sequence number of buffers for 900 and 1800 s sequences.
2020-07-18 13:56:19 -04:00
Joe Taylor
e73f27954d
Increase valid range of TRperiod controls.
2020-07-18 13:55:33 -04:00
Bill Somerville
43d6eacc4b
Refined stop times
2020-07-18 18:52:09 +01:00
Bill Somerville
60ddd40049
More 15 & 30 minute T.R period updates
2020-07-18 18:50:08 +01:00
Bill Somerville
28c5bfc1bd
Process double-clicks of Fox multi-caller replies correctly
...
This change also ignores attempts to double-click other Hound calls.
2020-07-18 14:47:20 +01:00
Bill Somerville
8b35e744d0
Increase Tx waveform storage & update wide graph nsps for FST240
2020-07-18 10:35:26 +01:00
Bill Somerville
4e0f1103b6
15 and 30 minute T/R periods for FST240 & FST240W
2020-07-17 23:44:14 +01:00
Bill Somerville
cccb38dbef
Pass hints to fst240sim, genfst240, and packjt77::pack77 on WSPR msgs
...
Due to an ambiguity with message encodings between 77-bit QSO modes
and 50-bit beacon modes with message types 13.n3 4.0 and 0.6 a hint
needs to be passed to ensure the right encoding is emitted. The hint
only effects ambiguous messages, others will be encoded strictly
according to the message content.
2020-07-17 19:09:21 +01:00
Joe Taylor
64dc6c6a6e
Move the red goal post appropriately when FST240 or FSt240W mode is selected.
2020-07-17 12:00:15 -04:00
Bill Somerville
74970acdb7
Align FST240W round-robin scheduling with hours
2020-07-16 14:09:24 +01:00
Bill Somerville
785e9e7924
Undo a change only intended to testing
2020-07-15 14:45:08 +01:00
Joe Taylor
79dbdcca9c
Correct a typo.
2020-07-14 14:54:40 -04:00
Joe Taylor
8ff7da3884
FST240W should Tx at audio freq in WSPRfreqSpinBox, not TxFreqSpinBox.
2020-07-14 14:51:40 -04:00
Joe Taylor
c925f6d1cc
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-07-14 11:43:40 -04:00
Joe Taylor
cbeb81b499
Add LF/MF noise blanker capability for FST240 and FST240W.
2020-07-14 11:27:41 -04:00
Bill Somerville
479dc1113f
Use non-averaging decodes window headings for FST240
2020-07-13 13:27:12 +01:00
Bill Somerville
7118f1ad14
Correct T/R period options for older modes, and correct start times
...
Fix up decode window headings.
2020-07-12 01:38:36 +01:00
Bill Somerville
f77b6bf71a
Only show FST240W T/R period spin box in FST240W mode
2020-07-08 19:37:31 +01:00
Joe Taylor
4de41162a3
Make sure FST240W uses submode A.
2020-07-06 15:36:01 -04:00
Joe Taylor
d4bf73df84
Minor cleanup of RoundRobin control.
2020-07-03 14:17:13 -04:00
Joe Taylor
cbca2f2d80
No band-hopping in FST240W mode.
2020-07-03 10:06:52 -04:00
Joe Taylor
15014685ac
Round-robin control should be visible only in FST240W mode.
2020-07-03 10:05:16 -04:00
Joe Taylor
f9e9a4e1ec
Don't let mouse-click on WindGraph move frequencies in FST240W mode.
2020-07-03 09:58:52 -04:00
Joe Taylor
b9e92c416f
Implement round-robin scheduling for FST240W mode.
2020-07-03 09:48:01 -04:00
Joe Taylor
5637b229a0
Correct the logic for initializing TRperiod everywhere in FST240W mode.
2020-07-02 16:54:16 -04:00
Joe Taylor
9f3bb0fbb7
Show option "Also FST240W" only in FST240 mode.
2020-07-02 16:20:18 -04:00
Joe Taylor
ab2371a96b
Correct the logic for generating "Type 2: messages in FST240W.
2020-07-02 14:57:46 -04:00
Joe Taylor
1a82b9b24d
Change the label for decoded text panel in FST240W mode.
2020-07-02 14:11:35 -04:00
Joe Taylor
8b2b1eb378
FST240W should always set RxFreq=1500 and FTol=100.
2020-07-02 14:03:00 -04:00
Joe Taylor
34055d331a
Send TRperiod to WideGraph when entering FST240 and FST240W modes.
2020-07-02 13:48:35 -04:00
Joe Taylor
352b497399
Remove a diagnostic print.
2020-07-02 13:43:50 -04:00
Joe Taylor
ee013f8687
Remove an unused action.
2020-07-02 13:29:43 -04:00
Joe Taylor
860224e890
Many changes to make FST240W behave in most ways like WSPR. Needs testing!
2020-07-02 09:39:11 -04:00
Joe Taylor
e63b04bb44
Post FSt240W decodes to PSK Reporter.
2020-07-01 15:46:17 -04:00
Joe Taylor
0608521751
Remove unused references to WSPR_LF.
2020-07-01 15:12:14 -04:00
Joe Taylor
eb1c60e454
Remove several more vestiges of WSPR-LF mode.
2020-07-01 13:17:07 -04:00
Joe Taylor
8903041aa9
Fix the startup value of TRperiod for FST240W mode.
2020-07-01 12:10:42 -04:00
Joe Taylor
f2c3cbf9ac
Implement basic functiionality of FST240W in the GUI.
2020-07-01 12:01:47 -04:00
Joe Taylor
ae54c80a54
Here's a start on GUI changes to support FST240W as well as FST240.
2020-06-30 17:14:58 -04:00
Joe Taylor
a44b240192
Change to NSPS=720 for 15-seconf FST240 modes, to allow use for EME.
2020-06-29 17:33:46 -04:00
Joe Taylor
ae6ca148bd
Pass mode name to the Modulator.
2020-06-29 14:47:46 -04:00
Joe Taylor
494481fa8a
Remove a poisonous but unused line of code.
2020-06-28 20:22:24 -04:00
Joe Taylor
7d094b36bf
Fix the "double-click on AP decode" crash.
2020-06-28 23:23:10 +01:00
Joe Taylor
1610375eee
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-06-28 16:27:23 -04:00
Joe Taylor
5b22280631
Fix the "double-click on AP decode" crash.
2020-06-28 16:26:22 -04:00
Bill Somerville
d5c5a58c7f
Merge branch 'develop' into feat-fst280
2020-06-27 22:14:09 +01:00
Joe Taylor
2b85c70bbc
Correct the m_hsymStop values for FST240-300.
2020-06-27 16:58:55 -04:00
Joe Taylor
51447ef1d3
Remove the 1 s offset in wave() array. Fix NSPS for 300 s periods.
2020-06-27 16:24:11 -04:00
Joe Taylor
eb167b11d3
Fix several more GUI parameters for FST240.
2020-06-27 14:13:59 -04:00
Joe Taylor
cd9146e646
Change a few more GUI parameters for the switch from FST280 to FST240. Tx timing probably still needs work.
2020-06-27 13:07:11 -04:00
Steven Franke
390884268c
Wholesale change from FST280 to FST240
2020-06-27 08:53:11 -05:00
Bill Somerville
4ee9ba6dba
Merge branch 'develop' into feat-wspr-user-hardware
2020-06-27 00:40:04 +01:00
Bill Somerville
37ab6eecd1
Update contributors, and UDP Message Protocol documentation
2020-06-27 00:23:34 +01:00
phl0
2a31d12d39
Adapt brach to changes proposed by G4WJS
2020-06-26 23:46:08 +01:00
phl0
6cbc91b653
Include prop mode in ADIF and UDP messages
2020-06-26 23:45:58 +01:00
Bill Somerville
27b4f2939a
More flexible execution of the user's hardware controller
...
Updated ways to implement a user defined hardware controller which is
executed just after band changes during WSPR band hopping operation.
Allows the user_hardware executable to be located in any directory on
the PATH environment variable. On Windows any file extension listed on
the PATHEXT environment variable may be used, the first match using
PATH and PATHEXT will be executed. On Windows this is achieved by
using CMD.EXE with a '/C' command line flag, i.e. the user's hardware
controller is executed like this:
CMD.EXE /C user_hardware nn
where 'nn' is the new band as an integer in meters.
On non-Windows systems the user's executable will be run if it is
found on the directories specified by the PATH environment variable,
and it is executable, i.e. it is equivalent to something like:
/bin/sh -c user_hardware nn
where 'nn' is the new band as an integer in meters.
In all cases the user_hardware controller should exit with a zero
status, otherwise it have been deemed to have failed. On Windows avoid
an exit status of one as that is utilized by CMD.EXE to indicate the
file was not found, which WSJT-X ignores silently.
This change means the prior need to put the user's hardware controller
into a WSJT-X installation directory like /usr/local/bin or
C:\WSJT\wsjtx\bin is no longer necessary.
2020-06-26 21:35:29 +01:00
Joe Taylor
9caf3b650c
Correct a number of parameters that control FST280 signal duration and timing.
2020-06-25 17:18:48 -04:00
Bill Somerville
ee157cde96
Avoid overriding style sheet for astronomical data dialog background
2020-06-25 12:57:12 +01:00
Joe Taylor
1226aacaad
Remove the silly C++ puzzle, no longer needed.
2020-06-24 21:25:02 -04:00
Joe Taylor
55115a2955
Move the Wide Graph's green bar for FTol up 3 pixels.
2020-06-23 15:15:45 -04:00
Joe Taylor
b006d8381a
Code for a C++ puzzle.
2020-06-23 14:21:25 -04:00
Joe Taylor
04e326e75a
Change "Enable VHF/UHF/Microwave features" to "Enable VHF and submode features", and remove the popup warning about being on a lower band.
2020-06-22 15:20:41 -04:00
Joe Taylor
1f7d8545f3
Tx line to ALL.TXT should be trimmed().
2020-06-21 13:49:37 -04:00
Joe Taylor
956aa2dfc5
Call switch_mode() to repopulate bandComboBox after switching to FST280.
2020-06-21 11:27:30 -04:00
Joe Taylor
f04c9d2267
Mark the FST280 Ftol range on the waterfall scale.
2020-06-21 10:54:24 -04:00
Joe Taylor
37b1b7aa6f
More of "Single Decode". Also, update m_mode in Wide Graph when switching to FST280.
2020-06-21 10:34:24 -04:00
Bill Somerville
af894c6039
Rename files to match class name
...
Avoiding case insensitive file system issues.
2020-06-21 02:15:31 +01:00
Bill Somerville
b48b23450d
First iteration of optional TCP/IP client for PSK Reporter
2020-06-21 01:36:30 +01:00
Joe Taylor
f8d7489b4e
Fix many odds & ends for merging FST280 properly into the GUI.
2020-06-20 13:47:32 -04:00
Joe Taylor
87b79d0615
OK, we can now transmit in FST280 mode.
2020-06-19 15:02:05 -04:00
Joe Taylor
acd04cc050
Correctly restore FST280 submode on program restart.
2020-06-19 11:43:34 -04:00
Joe Taylor
a4e32807d9
Correct WSJT-X's display of UTC in FST280 decodes for TR < 60 s.
2020-06-19 09:59:12 -04:00
Joe Taylor
1cebbd2cdd
Enable decoding of FST280 for other T/R sequence lengths. Needs testing!
2020-06-17 19:28:44 -04:00
Joe Taylor
5aeaf5dc78
Include h=8 and NSS=40 in the FST280 decoder.
2020-06-17 14:17:03 -04:00
Joe Taylor
af9f7b21c0
Starting to implement FST280 decoder. Make Rx sequences behave as desired.
2020-06-17 10:56:18 -04:00
Joe Taylor
0e3ff2688a
Further progress toward activating FST280 and FST280W in the GUI.
2020-06-16 16:59:40 -04:00
Joe Taylor
4f802cae84
More work toward implementing GUI features for FST280 and FST280W.
2020-06-16 15:56:15 -04:00
Joe Taylor
725933ddca
Initial commit with some GUI features for FST280 and FS280W.
2020-06-16 14:58:08 -04:00
Joe Taylor
398414a811
Add file names to widgets.pri
2020-06-16 14:51:59 -04:00
Bill Somerville
9c22b5c3ed
Qt v5.15 compatibility
2020-06-13 16:04:41 +01:00
Joe Taylor
3ad2a4c277
Remove a no-longer-used parameter from calls to lookup().
2020-06-07 13:32:18 -04:00
Joe Taylor
2973c8dad8
Remove the popup message that "<callsign> was not found in CALL3.TXT".
2020-06-07 13:27:49 -04:00
Joe Taylor
bcfa4526d2
Clear DX Grid after any change in DX Call. (Is this the best way to do it?)
2020-06-07 13:02:27 -04:00
Bill Somerville
d919af68a5
Repair UDP Highlight Callsign regression
...
When passing the 'Highlight last' parameter as true occasional matches
in prior periods could be incorrectly highlighted. This fix should
also improve performance when there is a large decode history, and
highlight request for a new callsign is received.
2020-06-05 17:55:45 +01:00
Joe Taylor
f9780927ab
Merge branch 'hotfix-2.2.1' of bitbucket.org:k1jt/wsjtx into hotfix-2.2.1
2020-06-04 11:45:23 -04:00
Joe Taylor
05cd8b3462
Improved logic for the way "Lookup" is processed.
2020-06-04 11:32:19 -04:00
Bill Somerville
a8115a9000
Escape regexp meta-characters in search strings
...
This resolves the regression where Highlight Callsign UDP messages
fail when the callsign contains a '+' character.
2020-06-04 03:41:11 +01:00
Bill Somerville
8833b56d91
Fix issue with 2D spectrum selection in translated UIs
...
For completeness this fixes the other occurrence of widget signals
with text arguments that are liable to misbehaviour with translated
UIs.
2020-06-03 17:43:27 +01:00
Bill Somerville
37bf0f7356
Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0
2020-06-01 16:49:36 +01:00
Joe Taylor
3811c1c0be
Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0
2020-06-01 11:49:14 -04:00
Bill Somerville
4e9d3e1076
Remove RC expiration and nag message
2020-06-01 16:48:50 +01:00
Joe Taylor
e97164719d
Zero the "nDecodes" label if there were no decodes in a sequence.
2020-06-01 11:48:35 -04:00
Bill Somerville
93db29d50a
Highlight Callsign with f/g & b/g invalid restores highlighting
...
Using a Highlight Callsign UDP message with `Highlight last` false and
specifying both f/g and b/g colours as invalid now resets the
highlighting on any matching callsign, as well as removing the decode
highlighting internal record.
2020-06-01 16:09:21 +01:00
K9AN
aa4d98b6f1
Fix MSK144 timestamps in ALL.TXT log.
2020-06-01 14:58:44 +01:00
Bill Somerville
1f06a2a948
Avoid text heuristics for macOS special menu actions
...
These go wrong too easily with l10n, this ensures the right menu
actions are treated specially on macOS and moved to their "normal"
place on the global system menu.
2020-05-29 20:00:02 +01:00
Bill Somerville
2088ad8597
Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0
2020-05-26 19:57:43 +01:00
Bill Somerville
65ef7c47f7
Repair regression defect in WSPR power combo box items
2020-05-26 18:00:14 +01:00
Joe Taylor
eeed9b5a2e
Don't allow restart with "ISCAT B" mode label unless VHF features are enabled.
2020-05-26 10:28:14 -04:00
Joe Taylor
c7ac74b2dc
Correct the restoration of WideGraph, EchoGraph, nd FastGraph after minimization.
2020-05-25 09:35:31 -04:00
Bill Somerville
c6688534cd
Performance improvements to decode highlighting
...
The Highlight Callsign (13) UDP message now operates in a slightly
different way. The "Highlight last" field, when true valued, causes
all instances of the specified callsign to be highlighted in the
decoding period. This allows external applications to highlight DX
callsigns even when multiple stations are calling them. Before this
was unlikely to work since the external application would have to
respond to Decode (2) UDP messages exceedingly quickly to guarantee
successful highlighting before another decode with the same DX call
was printed. There should be no changes required to external
applications acting as servers to the WSJT-X UDP Message Protocol,
although using the version of the Highlight Callsign (13) with
"Highlight last" should not be required for adhoc callsign
highlighting. It should be reserved for commonly recurring targets and
limited to no more than 100 active highlighting requests at any one
time, otherwise there may be performance impacts on WSJT-X.
2020-05-24 16:33:14 +01:00
Joe Taylor
628eab2cb6
Don't clear the Hold Tx frequency box at unwanted times.
2020-05-23 10:56:17 -04:00
Joe Taylor
8a572eb4a2
Add a mode label color for FT4, and fix a typo. Thanks to Yukio, JG1APX!
2020-05-23 09:05:01 -04:00
Joe Taylor
f62cdb4f37
Fix crash after the message "Double clicking is not supported in ISCAT mode".
2020-05-22 11:56:00 -04:00
Joe Taylor
bcdc12d210
Allow FT4 to use NA VHF Contest messages.
2020-05-21 12:05:51 -04:00
Bill Somerville
e43cb59bd0
More translatable strings in the UI
2020-05-19 12:28:58 +01:00
Bill Somerville
84f153517a
Made more strings translatable
2020-05-19 12:26:51 +01:00
Bill Somerville
cfeb2dda3f
Cosmetic punctuation for translation
2020-05-19 01:45:39 +01:00
Bill Somerville
a65bffb00b
Remove auto-default property from wide graph button
...
This avoid accidental palette switches by hitting ENTER.
2020-05-17 23:29:11 +01:00
Bill Somerville
76a846a319
Merge branch 'release-2.2.0' of bitbucket.org:k1jt/wsjtx into release-2.2.0
2020-05-15 14:42:53 +01:00
Bill Somerville
c9977e2a9c
Fix the minimum size of help text windows to the content size
...
This could make help text windows bigger than the screen, if we want
to go there then using a QLabel sub-class will need to change,
probably by using a read-only QTextEdit instead as that provides
scroll bars. Maybe consider a multi-column table for the contents as
an alternative to scroll bars.
2020-05-15 14:42:03 +01:00
Joe Taylor
ab1a433a1e
Updte to shortcuts.txt.
2020-05-14 15:07:15 -04:00
Joe Taylor
257f4b4999
Another attempt at red/green "goal post" markers that users will like.
2020-05-13 13:44:06 -04:00
Joe Taylor
e6b6a3ab5b
Bug fix for compound callsigns used with EU VHF Contest messages.
2020-05-13 11:54:25 -04:00
Bill Somerville
ce15159aaa
Fix an offset issue with the WSPR Tx power drop down list
2020-05-13 04:06:40 +01:00
Bill Somerville
4de6f73f1b
Restore start decodes behaviour at top for FT8 segmented decoding
2020-05-12 01:39:46 +01:00
Joe Taylor
7e3115e3d1
I believe these changes fix the "missing blank line" bug. Please watch for a counter-example!
2020-05-11 20:13:51 +01:00
Joe Taylor
bc8173a395
Don't allow reading a .wav file while decoder is busy.
2020-05-07 14:35:46 -04:00
Bill Somerville
1403c186d2
Updates for Qt v5.14 compaibility
2020-05-07 02:56:57 +01:00
Joe Taylor
c5d14da4a1
Add G4WJS and K9AN to title and authorship credits.
2020-05-06 09:38:09 -04:00
Bill Somerville
8c4af5dba7
Update version string in RC time out warning
2020-05-04 14:05:20 +01:00
Joe Taylor
0e29df1145
Enable the "RC" warning message for v2.2.0-rc1.
2020-05-03 13:56:25 -04:00
Joe Taylor
67e4c8855a
Warning message: "Fox-and-Hound operation is available only in FT8 mode".
2020-05-03 11:46:56 -04:00
Joe Taylor
292d6454c3
Warning msg: "EU VHF Contest messages require a 6-character locator."
2020-05-03 11:23:38 -04:00
Joe Taylor
aa2c965b85
Don't display Fox or Hound on labDX in FT4 mode. Fox/Hound is only available in FT8 mode.
2020-05-02 11:54:20 -04:00
Joe Taylor
38db927673
Fix another bug: I believe all contest modes autosequence properly now.
2020-05-01 16:39:40 -04:00
Joe Taylor
f3e0eed06b
Correct bug in RTTY RU autosequencing introduced with the new EU VHF Contest message format.
2020-05-01 13:33:27 -04:00
Joe Taylor
9709b19585
Better format for warning message.
2020-04-30 15:05:28 -04:00
Joe Taylor
a81c9acdce
Offer instruction in the "Should you switch to EU VHF Contest?" messagebox.
2020-04-30 14:44:51 -04:00
Joe Taylor
ef1c8b079c
Aid for color blindness: darken the green used to mark Rx freq and signal BW.
2020-04-30 12:15:23 -04:00
Joe Taylor
f4c0e7803b
Don't crash after double-click on a EU_VHF message with <...>.
2020-04-25 16:28:05 -04:00
Joe Taylor
47a3f9c736
Don't allow hijacking of EU VHF Contest QSOs. (Why is this change necessary?)
2020-04-25 12:11:20 -04:00
Joe Taylor
ee04d864cf
Correct for "deCallAndGrid" not working for EU VHF contest messages.
2020-04-24 10:33:23 -04:00
Joe Taylor
d657da5980
Don't switch automatically to EU VHF Contest mode.
2020-04-23 16:15:19 -04:00
Joe Taylor
7b444b855b
Fix an index value. Better approach: fix parsing in decodedtext.cpp.
2020-04-22 14:45:43 -04:00
Bill Somerville
e51bfc8397
Fix a QStringList bounds error in auto-sequencing
2020-04-22 18:32:00 +01:00
Joe Taylor
185901e518
Auto-sequences QSOs with EU VHF Contest messages now work OK.
2020-04-22 13:08:45 -04:00
Joe Taylor
47f47a313f
Fix a lonstanding bug that causes crash when logging incomplete EU VHF Contest data.
2020-04-22 11:51:30 -04:00
Joe Taylor
428bb96ce8
Temporary commit to help in finding a bug.
2020-04-22 11:34:06 -04:00
Joe Taylor
8253f359bc
First cut at auto-sequencing for the new-style EU VHF Contest messages.
2020-04-21 15:50:27 -04:00
Bill Somerville
f286a24710
Ensure that break lines are printed when decoder is aborted
...
This change also moves some other decode finished logic into
MainWindow::decodeDone().
2020-04-18 00:22:07 +01:00
Joe Taylor
75f0e40e8a
Make "Hold Tx Freq" invisible in JT4, QRA64, and JT65/VHF.
2020-04-17 16:10:47 -04:00
Joe Taylor
35eb391e23
Clean up the formation and display of JT4 average and DS decodes.
2020-04-17 12:14:43 -04:00
Joe Taylor
800ed045b6
Remove some obsolete, commented-out code.
2020-04-15 13:41:45 -04:00
Joe Taylor
dc71fd70d5
Stated WSPR power levels below 0 dBm are not allowed. Remove them from TxPowerComboBox.
2020-04-14 12:12:53 -04:00
Joe Taylor
b6e2fa82c0
Update copyright notice to 2020.
2020-04-10 11:19:42 -04:00
Joe Taylor
c188f8ee89
More cleanup of the display of special JT65 decoding modes: avg, deep, AP.
2020-04-09 13:56:35 -04:00
Joe Taylor
0390791090
Fix some problems with message averaging, etc., in JT65 with VHF features enabled. Needs further testing!
2020-04-08 16:56:28 -04:00
Joe Taylor
9d2b2b1a56
Maintain visibility of AvgMsg window when it has been activated.
2020-04-08 10:56:11 -04:00
Joe Taylor
d69da851c1
Fix the 'OO O' display problem for some JT65 decodes.
2020-04-07 18:26:30 -04:00
Joe Taylor
c46ec025e0
For "D4C/B HK76": Make FT8 beacon transmissions only at top of a UTC minute.
2020-04-07 09:39:48 -04:00
Steven Franke
3f7b06853e
Make wspr work again.
2020-03-21 14:44:17 -05:00
Joe Taylor
a39470cb6f
FT4 should always use RR73 in Tx4.
2020-03-20 09:32:02 -04:00
Joe Taylor
fe33bcdd6c
More cleanup after making "Save None" mean NO SAVING AT ALL.
2020-03-19 15:41:18 -04:00
Joe Taylor
7de6b8c98d
Remove diagnostic writes. Don't save .wav files if "Save None" is selected.
2020-03-19 14:46:41 -04:00
Joe Taylor
d4d37c49ab
Silence compiler warnings.
2020-03-19 12:04:56 -04:00
Joe Taylor
7564301209
Silence compiler warnings.
2020-03-19 11:43:22 -04:00
Joe Taylor
aff8229fef
For non-FT8 modes, reset m_nDecodes to 0 after receiving <DecodeFinished>.
2020-03-17 14:39:15 -04:00
Joe Taylor
2653626d45
Replace the changes I removed by executing 'git reset HEAD~'.
2020-03-16 10:27:22 -04:00
Joe Taylor
3962aa3c43
Replace hijacked ss(1:3,1) with a separate ipc(3) array.
2020-03-15 14:25:56 -04:00
Bill Somerville
46638f6f07
Add shared memory synchronization to make access safe
2020-03-15 00:25:35 +00:00
Joe Taylor
649a79dfc1
New IPC trial: use shmem instead of .start .stop .quit files.
2020-03-14 17:06:54 -04:00
Bill Somerville
523e9a1a07
Enhanced process control for jt9 executable
...
The wsjtx process creates control files .start, .stop, or .quit and
the jt9 process deletes them. This is intended to avoid any race
conditions that get the processes out of sync.
2020-03-14 00:01:54 +00:00
Joe Taylor
ebf4952c7c
Auto-clear of hung decoder status.
2020-03-13 14:25:12 -04:00
Joe Taylor
8151816c84
Change formats of diagnostic writes so that GUI and Fortran output can be sorted together.
2020-03-13 11:25:22 -04:00
Joe Taylor
fedb72a38c
Set m_nDecodes=0 only after the 50-buffer decode pass.
2020-03-12 16:52:19 -04:00
Joe Taylor
afe0262ec9
Previous commit message should have mentioned number of decodes is now displayed on status bar.
2020-03-12 15:11:20 -04:00
Joe Taylor
8e7685ea36
Do not alolow bailouts when data were read from disk.
2020-03-12 15:07:56 -04:00
Joe Taylor
6e308f0018
More attempts to diagnose or fix the FT8 "hung decoder" issue.
...
On the Fortran side:
- For the nzhsym=41 activation, bail out if m_ihsym reaches 45
- For the nzhsym=47 activation, bail out if m_ihsym reaches 48
- Change the format and content of what's written to fort.71
- Change msdelay from 10 to 1
In mainwindow.cpp:
- change format and content of what's written to qDebug
- always start FT8 decoder at m_ihsym = 41, 47, and 50
2020-03-12 12:33:34 -04:00
Bill Somerville
6a7263dc94
Add escape route from retries of IPC errors
2020-03-11 22:38:41 +00:00
Bill Somerville
c58a690bf1
Add error checking to jt9 process control by .lock/.quit files
2020-03-11 22:26:41 +00:00
Joe Taylor
4d9c9e08e2
If 47-buffer call takes too long, start the 50-buffer call late.
2020-03-11 16:03:51 -04:00
Joe Taylor
d69cb49e9a
Diagnostic writes to fort.71 in jt9a.f90.
2020-03-11 14:02:19 -04:00
Joe Taylor
199ff3dd3d
Experimental work-around for FT8 decoding on slow computers. Important changes:
...
- don't start function decode() is decoder is already busy
- send updated m_ihsym to jt9[.exe] via ss(1,1). Bill won't like this!
- jt9 bails out of the 41-buffer pass at m_ihsym=45.
2020-03-10 16:26:42 -04:00
Joe Taylor
592f4eea71
Remove a qDebug() call.
2020-03-09 15:29:57 -04:00
Steven Franke
f2266c3c54
1. subtractft8: on the last call to sqf, don't need to do the long FFT.
...
2. mainwindow.cpp: based on the time when <DecodeFinished> is received, calculate
mswait to try to place the killFile time at 0.75*m_TRperiod.
2020-03-06 11:06:44 -06:00
Joe Taylor
431ec50212
Progress toward decoding at 41/47/50 buffers. Not yet complete!
2020-03-05 15:37:31 -05:00
Steven Franke
6773768586
Clean up the timestamp adjustment logic, and make the threshold 0.5*TRperiod.
2020-03-05 11:25:49 -06:00
Steven Franke
07c753e284
Make ALL.TXT Rx timestamp equal to the beginning of the TR period, even if the decode comes in after the start of the next TR period. Make Tx timestamp the actual time that Tx started.
2020-03-05 11:16:56 -06:00
Joe Taylor
8e7a56634b
Set nearly=41; don't write <DecodeFinished> after the early decode pass.
2020-02-28 15:03:39 -05:00
Joe Taylor
b9888a09ff
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-02-26 13:16:12 -05:00
Joe Taylor
6afff5821e
Correct the times written to ALL.TXT when decode occurs after the T/R boundary.
2020-02-26 13:15:22 -05:00
Steven Franke
0ca6cbb575
wsprd: improve decoding and reduce the number of false decodes
...
Hashtable entries now include the 4-digit grid obtained from the most
recent Fano decode of the callsign. The stored grid is used to validate
OSD decodes. OSD decodes of type 1 messages are accepted only if the
callsign is present in the hashtable and if the grid matches the grid
stored in the hashtable.
2020-02-25 10:48:38 -06:00
Joe Taylor
4a4864d2ae
FT8 early decoding is now working.
2020-02-13 15:05:37 -05:00
Steven Franke
70b84478f0
Add WW_DIGI to the special activities section. Make necessary changes to
...
the decoders. Also, an experimental change to the FT4 decoder to base
AP decoding passes on 4-symbol block detection instead of single symbol
detection. This provides about 1 dB improvement on the AWGN channel.
Sensitivity changes on other channels are TBD.
2020-01-24 11:26:36 -06:00
Steven Franke
a63e6e1209
- Force the use of standardized CQ modifier for FT4/FT8 contest operation.
...
- Pass CQ modifier string to the ft4 decoder.
2020-01-08 08:41:47 -06:00
Bill Somerville
75c9e1d696
Fix a patching error
2019-12-29 12:34:02 +00:00
Bill Somerville
5e3781e9e9
Correct some UI text typos
...
Thanks to Christoph, DF7CB, for providing a patch for these typos.
2019-12-29 12:25:59 +00:00
Bill Somerville
5a23edbbae
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2019-12-08 18:42:06 +00:00
Bill Somerville
485f787cef
Increase maximum SNR filter value in Fox mode to 70dB
...
This change abandons the previous settings file key for this control
so that all users pick up the new default of 70dB.
2019-12-08 18:39:37 +00:00
Bill Somerville
32c36f566d
Use DB date time field item delegate to imbue editing in log windows
2019-12-08 18:37:35 +00:00
Joe Taylor
7540d2137a
For accessibility: Alt+R sets Tx4 message to RR73, Ctrl+R to RRR.
2019-12-05 11:27:17 -05:00
Bill Somerville
fb1b2e7687
Tagging the WSJT-X v2.1.1 release
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl3a8/QACgkQ2GSwbR6B
YY8y+ggAqwaaCRMCSwDzStooYjStJErVoZ/yB//MmoF+798TBb+3MkiT+KclW7aN
rxTOmEJ+a84PmsiW6Qz/AAcHPnbKDhtwWASZooopgNYDfgyaUib3HfIa+cFJO6my
OUzlTsH94yDxeBCWOtf1dLiP0YwJKfp/vxzbfDAWXTd4dx3Ok/7KwghYocmP3eCq
ruZ+dWojQzwE+h50P6B9gTFxGWMHUDDNeZ/c8u494wqDQvQaRoM9oOnQWzlGiMis
JaerraI52JEdFLnXjtLYeyXtfg+zA0KvRY2DWy1aCPpGkNjy3DPNlOA+cDQpzBru
NIqsUF+GplgkVs3sKNLXq36ZgaBQBg==
=5w4B
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEUELwYiy7vDRM+hTD2GSwbR6BYY8FAl3a9R8ACgkQ2GSwbR6B
YY9SWQf+JdfIvlHy8ExSs9ImCLck/e66V2OAqaEONQX1bEC4QiG3M/rVJGgf2iFz
ZFshtilsajlpsYZQIFToTmJmI76eGLAmyNIcZN2WpcJQMNWZnxqklMj2wIHbRh+g
Pvw3FC+lc4LUjZCCMYrVjNXxsRmQtjqV1lVFBnmrAWCdrgHmhyrVbPZT4B+fRTXL
ikw/BiRgxhI0aoIWKzNrtztMYUBjanKLTHE81AVgsgZkBDNybOjR7mE2E/Jwc4Qx
mVu+Z0uI+bVuBlMOrqp0K+rrUz7qMZe5/AMSRbgzwfueEOIShgu2wrfV++3JDXLH
AhtIAcL/b39RBx0jkFE8rBKaZpkoAw==
=DNp6
-----END PGP SIGNATURE-----
Merge tag 'wsjtx-2.1.1' into develop
Tagging the WSJT-X v2.1.1 release
2019-11-24 21:24:39 +00:00
Joe Taylor
849e8c7c55
When using EU VHF Contest messages, update the received exchange m_xRcvd only if decoded messages is addressed to me.
2019-11-18 14:00:42 -05:00
Bill Somerville
58c901240b
Use call, mode, and frequency from Log QSO for worked before records
...
The current frequency, mode and, call were incorrectly being used to
create a new worked before record from a logged QSO. This meant that
band changes etc. made before clicking "Ok" to log a QSO would be
erroneously attributed to the worked before records.
2019-09-17 21:04:34 +01:00
