Commit Graph

660 Commits

Author SHA1 Message Date
Bill Somerville
e0e67f0a6a Added CMake option to control experimental features.
Sometimes parts of the application are  not fully ready for release at
release  time.   This  option  allows  such  features  to  be  enabled
conditionally at configure time.

The CMake option WSJT_ENABLE_EXPERIMENTAL_FEATURES  is used to control
this ability.  Normally  you will not need to change  it as it behaves
in a reasonable  way.  The option is ON in  debug build configurations
and OFF in non-debug configuratiuons.

The  option  is   made  available  in  all  source   modules  via  the
WSJT_ENABLE_EXPERIMENTAL_FEATURES macro  which is defined to  1 if the
option is ON and to 0 if it is OFF.

Since this  default behavior is  potentially dangerous because  it can
mean that release builds contain different code from debug builds; the
option may  be set to  OFF in debug  configurations in the  normal way
(cmake-gui,  edit  CMakeCache.txt, etc.)   to  achieve  a debug  build
similar to a default release build.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4182 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-06-19 16:47:49 +00:00
Bill Somerville
dc3363d490 Maintain cursor position during free text edits.
The validation processing of the free text line edit field was causing
the cursor position to be lost.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4148 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-22 11:09:21 +00:00
Bill Somerville
a9e1a70092 Fix issue with non-modal window lifetimes.
Some non-modal help windows were not being automatically closed on
application exit.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-15 11:41:18 +00:00
Bill Somerville
5b3e35537f Make qmake project file more generic.
It is now possible to override the default locations hard coded in
this file with local preferences.

The variables that can be overridden are HAMLIB_DIR and DESTDIR.

To override, add local variable assignments on the intial qmake
command line. E.g.:

qmake HAMLIB_DIR=c:\my\local\hamlib\installation DESTDIR=c:\my\local\install\destination



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4141 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-14 19:14:37 +00:00
Joe Taylor
c33fe44b98 Fix several problems in wsjtx.pro, for qmake builds.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4140 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-14 17:43:30 +00:00
Bill Somerville
747426fe3a Fix qmake build issue where CMake generated macros were erroneously
being used in non-CMake builds.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4139 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-14 17:32:31 +00:00
Bill Somerville
63774a983a Fix a regression introduced in r3986 - no decode after "Halt TX".
The new suspend/resume approach to  the received audio stream causes a
reset to the input sample buffer  on resume. This is desired behaviour
except when the stream in not actually suspended. The monitor function
was not checking this when resuming monitoring and this caused decodes
for a period to be abandonded simply  by using the "Halt TX" button to
turn off automatic transmission mode.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-21 14:39:39 +00:00
Bill Somerville
d157c20016 Add those pesky MOC generated code includes that break libraries if
they are included by automoc.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4035 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-16 15:15:46 +00:00
Bill Somerville
5f95e16490 Only calculate revision once.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4024 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-14 10:42:11 +00:00
Bill Somerville
5b05f229a1 Try to form a consistent program title and revision specification from
all types of build.

CMake builds use 'svn info' (the git-svn equivalent is also supported)
to  get the  real latest  revision of  the workspace  that is  used to
source a  build. If the sources  are not in VCS  workspace (build from
source  snapshot  archive for  example)  then  the  $Rev$ svn  keyword
expansion in mainwindow.cpp is used despite its issues with accuracy.

Non-CMake builds use the $Rev$ keyword expansion where possible.

If a CMake  build is from a VCS workspace  with local modifications; a
'-dirty' suffix is added to the revision number to denote that.

If no revision number information can be found the word 'local' is
used as a revision number.

The revision  specification is used in  the WSJT-X "about"  box and is
sent  to PSKReporter.info  as part  of the  local  station information
(this     can     be     viewed     at     the     statistics     page
http://pskreporter.info/cgi-bin/pskstats.pl).

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4017 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-13 17:22:12 +00:00
Bill Somerville
d0dce856c0 Attempt to fix a few TX sequencing issues.
Simplified some of the TX logic and removed some redundant code.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4014 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-11 22:50:44 +00:00
Bill Somerville
fc1713e9bf Simplify MainWindows to Modulator communications.
No longer any need to have a mute mechanism since the TX shutdown
mechanism is sufficient.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4012 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-11 22:50:22 +00:00
Bill Somerville
ce0402941f Pass JT9W tone spacing to Modulator via a signal/slot as it is
crossing a thread boundary.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3995 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-08 11:56:29 +00:00
Bill Somerville
0403b16aac Replaced Detector monitoring switch with audio stream suspend/resume.
In an effort to reduce the processing overhead when transmitting I
have suspended the audio input stream at source instead of the prior
behavior that simply idled skipping received samples.

This is in response to high activity levels, especially with JTAlert
also running, when decode processing rolls over into the next TX
period.

Tests show a reduction in CPU loading from ~5% to ~1.5% in the above
scenario. Hopefully this will reduce the likelyhood of TX audio
glitches when other system activity spikes.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3986 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-07 00:55:05 +00:00
Bill Somerville
f076c37c19 Made the soft keying CW wave shaper a CMake option (off by
default).

Reorganized Modulator interface so that it can control the stream
it writes to.

Make sure only QAudioOutput::stop is called at the end of sending
rather than QAudioOutput::reset which discards pending samples.

Added a quick close option to the Modulator::stop slot to discard
pending buffers if required.

Fix issue in CW synthesizer that was causing CW to be inverted
occasionally.

Made global arrays of symbols volatile because compiler waa
optimizing away reads in sound thread. These global variables
must go eventually as they are a multi-threading hazard.

Simplified TX sequencing to remove some duplicate signals.

Increased range of TX attenuator from 10dB to 30dB. This is mainly for
non-Windows platforms where the attenuator isn't linearized correctly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3985 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-06 21:58:11 +00:00
Bill Somerville
b3f17051e7 Save the last used free text message between runs.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3982 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-03 21:55:51 +00:00
Bill Somerville
4453a46664 Don't overwrite frequency, station or, macro models whenleaving the
configuration dialog unless they have changed.

Fix a bug I had introduced into the free text message fields so they
don't get overwritten by message generation.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3981 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-03 21:19:04 +00:00
Bill Somerville
db0ba3940d Squashed yet more compiler warnings.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3979 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-03 20:06:30 +00:00
Bill Somerville
581691befb Rearranged sequencing of audio streams and devices.
The code  was starting streams linked  to closed devices which  may be
causing issues on  the Mac version.  I have refactored  to ensure that
devices are always opened before related audio streams are started.

Made .h C++ headers emacs friendly.

Removed some code in the MainWindow  contructor that read the log file
but failed to check if the file exists and didn't do anything with the
data anyway.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3977 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-03 19:29:13 +00:00
Bill Somerville
a893d42288 Uniform appearance of window titles.
Svn revision  number displayed  in about  window and  sent PSKReporter
only.

About box text centred and uses Copyright symbol.

Window   title   on  "Log   QSO"   dialog   includes  rig-name   where
multi-instance support  is enabled. This  is necessary since  the "Log
QSO" dialog is not modal.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3960 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-30 01:31:40 +00:00
Bill Somerville
c48be0494f Reducing the number of files dependent on svnversion.h without
compromising qmake builds. Now it is required to directly include
svnversion.h to get the SVNVERSION macro defined.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3955 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-29 02:51:07 +00:00
Bill Somerville
a9f0dd0efe Aligned CMake built auto fetch svn revision with old qmake $Id: one.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3950 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-29 00:28:44 +00:00
Bill Somerville
9247e10115 Added support for use of "Standard" locations for writable files.
This allows  writable files  to be  located in  the "correct"
         location for  each platform rather  than in the  directory of
         the  executable  which, in  general,  is  not recommended  or
         allowed in some cases.

         A preprocessor macro  WSJT_STANDARD_FILE_LOCATIONS is used to
         switch be tween old and new functionality, currently it is on
         by default.  It  can be turned off by defining  it to a false
         value (0)  or more simply  with cmake-gui setting  the option
         with  the same  name.  JTAlert  can  only work  with the  old
         non-standard file  locations until  Laurie VK3AMA  chooses to
         support the new file locations.

         Even  if the  above is  not  enabled; the  QSettings file  is
         written to a  user specific location so it will  be shared by
         all instances  of the  program (i.e.  across  upgrades).  See
         below for multiple concurrent instance support changes.

Added a command line parser module for Fortran.

         Added 'lib/options.f90'  to facilitate more  complex argument
         passing to jt9 to cover explicit file locations.

Changed the way multiple concurrent instances are handled.

         This is  to allow the program  to be run multiple  times from
         the same installation directory.

         A new wsjtx command line  optional argument is available "-r"
         or  "--rig"   which  enables  multiple   concurrent  instance
         support.  The  parameter of the  new option is a  unique name
         signifying  a rig  or equivalent.   The name  is used  as the
         shared memory segment key and  in window titles.  The name is
         also used to  access unique settings files  and writable data
         files like ALL.TXT  and log files.  No attempt  has been made
         to share these files between concurrent instances.

         If  "-r" or  "--rig" is  used  without a  parameter it  still
         enables  multiple   concurrent  instance  support   for  that
         instance.  All instances must use  a unique parameter, one of
         which may be empty.

         The        rig       name        is       appended        the
         QCoreApplication::applicationName() for convenient usage like
         window titles.

Set non Qt locale to "C".

         This ensures that C library functions give consistent results
         whatever the  system locale is set  to.  QApplication follows
         the system locale as before.  Thus using QApplication and its
         descendants  like widgets  and QString  for all  user visible
         formating will give correct l10n and using C/C++ library will
         give consistent formatting across locales.

Added top level C++ exception handling to main.cpp.

         Because  the   new  transceiver  framework   uses  exceptions
         internally, the main function now handles any exceptions that
         aren't caught.

Retired devsetup, replaced with Configuration.

         Configuration  is  a  class  that encapsulates  most  of  the
         configuration  behavior.   Because  rig configuration  is  so
         closely coupled with rig operation, Configuration serves as a
         proxy  for   access  to  the  rig   control  functions.   See
         Configuration.hpp  for  more  details  of  the  Configuration
         interface.

Menu changes.

         Various checkable  menu actions moved  from main menu  to the
         Configuration  dialog.   The  whole settings  menu  has  been
         retired with  the single  "Settings..."  action moved  to the
         file  menu  for  consistency  on  Mac  where  it  appears  as
         "Preferences" in line with Mac guidelines.

New data models for data used by the application.

         ADIF amateur band parameters,  free text message macros, spot
         working   frequencies  and,   station  information   (station
         descriptions and transverter offsets per band) each implement
         the  QAbstractItemModel interface  allowing them  to be  used
         directly with  Qt view widgets  (Bands.hpp, FrequencyList.hpp
         and, StationList.hpp).  Configuration  manages maintenance of
         an instance of  all but the former of the  above models.  The
         ADIF band  model is  owned by  Configuration but  requires no
         user maintenance as it is immutable.

Band combo box gets more functionality.

         This  widget is  now an  editable QComboBox  with some  extra
         input capabilities.

         The popup list is still the list of spot working frequencies,
         now  showing the  actual  frequency decorated  with the  band
         name.  This  allows multiple  spot frequencies  on a  band if
         required.

         The  line edit  allows direct  frequency entry  in mega-Hertz
         with  a completer  built  in to  suggest  the available  spot
         working frequencies.   It also  allows band name  entry where
         the  first  available  spot working  frequency  is  selected.
         Recognized band names are those  that are defined by the ADIF
         specification and  can be found  in in the  implementation of
         the ADIF bands model (Bands.cpp).

         If an out of band frequency  is chosen, the line edit shows a
         warning red  background and the  text "OOB".  Out of  band is
         only defined  by the  ADIF band limits  which in  general are
         wider than any entities regulations.

Qt 5.2 now supports default audio i/p and o/p devices.

         These devices are placeholders  for whatever the user defines
         as the  default device.   Because of  this they  need special
         treatment as  the actual device  used is chosen at  open time
         behind the scenes.

Close-down behavior is simplified.

         The close-down  semantics were broken such  that some objects
         were not being shut down cleanly, this required amendments to
         facilitate correct close down of threads.

User font selection added to Configuration UI.

         Buttons to set the application font and the font for the band
         and  Rx frequency  activity widgets  have been  added to  the
         Configuration UI to replace the file based font size control.

Free text macros now selected directly.

         The free text line edit  widgets are now editable combo boxes
         that have  the current free  text macro definitions  as their
         popup  list.   The old  context  menu  to  do this  has  been
         retired.

Astronomical data window dynamically formatted and has font a chooser.

         This window is now autonomous,  has its own font chooser and,
         dynamically resizes to cover the contents.

Double click to Tx enabled now has its own widget in the status bar.

QDir used for portable path and file name handling throughout.

The  "Monitor", "Decode",  "Enable  Tx" and,  "Tune"  buttons are  now
checkable.

         Being checkable allows these  buttons control their own state
         and rendering.

Calls to PSK Reporter interface simplified.

         In   mainwindow.cpp  the   calls   to   this  interface   are
         rationalized to just 3 locations.

Manipulation of ALL.TXT simplified.

         Moved, where possible, to common functions.

Elevated frequency types to be Qt types.

         Frequency  and FrequencyDelta  defined as  Qt types  in their
         meta-type system  (Radio.hpp).  They  are integral  types for
         maximum accuracy.

Re-factored rig control calls in mainwindow.cpp.

         The new  Configuration proxy  access to rig  control required
         many changes  (mostly simplifications) to the  MainWindow rig
         control code.  Some  common code has been  gathered in member
         functions   like   qsy(),   monitor(),   band_changed()   and
         auto_tx_mode().

Rig control enhancements.

         The  rig control  for  clients interface  is  declared as  an
         abstract    interface   (See    Transceiver.hpp).    Concrete
         implementations of this interface are provided for the Hamlib
         rig  control library,  DX Lab  Suite Commander  via a  TCP/IP
         command channel, Ham  Radio Deluxe also via  a TCP/IP command
         channel and, OmniRig via its Windows COM server interface.

         Concrete Transceiver implementations are expected to be moved
         to a separate thread after construction since many operations
         are blocking  and not suitable  for running in a  GUI thread.
         To facilitate this all  instantiation of concrete Transceiver
         instances are handled by  Configuration using a factory class
         (TransceiverFactory)   for   configuration  parameter   based
         instantiation.

         Various   common  functionality   shared  by   different  rig
         interface implementations  are factored out into  helper base
         classes that  implement or delegate parts  of the Transceiver
         interface.  They  are TransceiverBase  which caches  state to
         minimize expensive rig commands, it also maps the Transceiver
         interface  into a  more  convenient  form for  implementation
         (template methods).  PollingTransceiver that provides a state
         polling   mechanism  that   only   reports  actual   changes.
         EmulateSplitTransceiver  that  provides  split  operation  by
         QSYing on PTT state changes.

         EmulateSplitTransceiver can  be used with  any implementation
         as  it follows  the GoF  Decorator pattern  and can  wrap any
         Transceiver implementation.

         OmniRigTransceiver is  derived directly  from TransceiverBase
         since  it doesn't  require  polling due  to its  asynchronous
         nature.  OmniRigTransceiver is only built on Windows as it is
         a COM server client.  To build  it you must first install the
         OmniRig     client     on     the     development     machine
         (http://www.dxatlas.com/omnirig/).

         DXLabSuiteCommanderTransceiver          derives          from
         PollingTransceiver since  it is a  synchronous communications
         channel.   No  third  party  library  is  required  for  this
         interface.

         HRDTransceiver also derives from PollingTransceiver.  The HRD
         interface  library has  been  reverse  engineered to  provide
         functionality with  all available versions of  HRD.  No third
         party libraries are required.

         HamlibTransceiver  likewise  derives from  PollingTransceiver
         since  the Hamlib  asynchronous interface  is non-functional.
         Although this  class will interface with  the release version
         of Hamlib (1.2.15.3);  for correct operation on  most rigs it
         needs to  run with the  latest master branch code  of Hamlib.
         During development many changes to Hamlib have been submitted
         and accepted,  hence this requirement.  Hamlib  source can be
         obtained from git://git.code.sf.net/p/hamlib/code  and at the
         time of writing he master branch was at SHA 6e4432.

         The Hamlib interface directly calls the "C" interface and the
         modified rigclass.{h,cpp} files have been retired.

         There is a rig type selection of "None" which may be used for
         non-CAT  rigs, this  is actually  a connection  to the  dummy
         Hamlib device.

         PollingTransvceiver   derives    from   TransceiverBase   and
         TransceiverBase derives from the Transceiver interface.

         Each interface implementation offers  some possibility of PTT
         control via  a different serial  port than the CAT  port.  We
         also support PTT  control directly via a  second serial port.
         This is done  by delegating to a dummy  Hamlib instance which
         is   only   used   for   PTT  control.    This   means   that
         DXLabSuiteCommanderTransceiver,       HRDTransceiver      and
         OmniRigTransceiver  always  wrap  a  dummy  HamlibTransceiver
         instance.  The  factory class TransceiverFactory  manages all
         these constructional complexities.

         Serial port  selection combo  boxes are  now editable  with a
         manually  entered value  being  saved to  the settings  file.
         This allows  a non-standard  port device  to be  used without
         having to edit the settings file manually.

         For TCP/IP  network CAT  interfaces; the network  address and
         port  may  be specified  allowing  the  target device  to  be
         located on a different machine  from the one running wsjtx if
         required.  The  default used when  the address field  is left
         blank is the correct one for normal usage on the local host.

         Selecting a polling  interval of zero is  no longer possible,
         this  is because  the rig  control capability  can no  longer
         support one way connection.  This  is in line with most other
         CAT control software.

         In the Configuration dialog there are options to select split
         mode  control  by  the  software  and  mode  control  by  the
         software.  For  the former  "None", "Rig"  and "Fake  it" are
         available,  for  the latter  "None",  "USB"  and, "Data"  are
         available.  Because  tone generation is implicitly  linked to
         split mode  operation; it is  no longer possible to  have the
         software in split  mode and the rig not or  vice versa.  This
         may mean some rigs cannot be used in split mode and therefore
         not in dual JT65+JT9 until  issues with CAT control with that
         rig are  resolved.  Single  mode with VOX  keying and  no CAT
         control are still possible so even the most basic transceiver
         setup is supported as before.

         Configuration now  supports a  frequency offset  suitable for
         transverter   operation.     The   station    details   model
         (StationList.hpp) includes  a column  to store an  offset for
         each band if required.

CMake build script improvements.

         The CMakeLists.txt from the  'lib' directory has been retired
         with its  contents merged into the  top level CMakeLists.txt.
         Install  target support  has been  greatly improved  with the
         Release build  configuration now building a  fully standalone
         installation  on Mac  and Windows.   The Debug  configuration
         still   builds   an   installation   that   has   environment
         dependencies for  external libraries, which is  desirable for
         testing and debugging.

         Package target  support is largely complete  for Mac, Windows
         and, Linux, it should be possible to build release installers
         directly from CMake/CPack.

         Cmake FindXXXX.cmake  modules have been added  to improve the
         location of fftw-3 and Hamlib packages.

         Version numbers are now stored in Versions.cmake and work in
         concert with automatic svn revision lookup during build.  The
         version string becomes 'rlocal'± if there are any uncommitted
         changes in the build source tree.

Moved resource like files to Qt resources.

      	 Because location of resource files  (when they cannot go into
      	 the  installation directory  because of  packaging rules)  is
      	 hard to standardize.  I have used the Qt  resource system for
      	 all ancillary data files. Some  like kvasd.dat are dumped out
      	 to the temp (working directory)  because they are accessed by
      	 an external program, others like the audio samples are copied
      	 out so  they appear in  the data directory under  the default
      	 save directory.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
John Nelson
1a427e4bdf Remove increase in drop down freq menu: not necessary
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3872 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-15 14:41:35 +00:00
John Nelson
12fbee2bf3 Increase number of items in freq drop-down menu from 10 to 16
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3871 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-15 09:27:29 +00:00
Joe Taylor
5004d99d0d Temporarily(?) comment out the "-subsystem,windows" flag in CMakeLists.txt.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3867 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-12 18:47:28 +00:00
Joe Taylor
5f9b624632 Update the CMake files and the rev number.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3842 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-05 20:25:01 +00:00
Joe Taylor
86591544f0 Merge changes from branches/wsjtx_w back into branches/wsjtx.
Note to developers: Not sure about the makefiles...


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3835 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-05 18:20:40 +00:00
Edson W. R. Pereira
9a51f29123 Testing commit access
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3832 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-05 14:19:33 +00:00
Joe Taylor
39effefb2f Reposition several controls on main window.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3777 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-02-19 01:32:05 +00:00
Joe Taylor
7d81d1bb59 Sorry, I committed a corrupt file. OK now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3680 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-31 19:13:14 +00:00
Joe Taylor
7a4a1f216a Implement automatic generation of "Type 1" or "Type 2" messages with
compound callsigns, as required.

TO DO:  Now that the fixed "short list" of common prefixes and suffixes 
is compiled into the code, would be better to remove the requirement for 
file prefixes.txt.  



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3679 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-31 19:01:33 +00:00
Joe Taylor
09f6fba6ec Working on code that will make "genStdMsgs()" generate the proper
"Type 1" or "Type 2" messages when a compound callsign is present.
This is not yet finished!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3677 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-31 16:45:12 +00:00
Joe Taylor
7324ece8a7 Forgot to put utilities.adoc in SVN. Here it is.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3675 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-30 19:09:14 +00:00
Greg Beam
7909c5b818 User Guide Updates
* Main Page
- (3.3) Changed OS x DL links to "osx_" vs "osx-" in the ref links.
- Updated main page links. I think we should consider an include::file v.s
- line item listing, as the list is getting kinda long.
- Updated quick-reference guide

* (3.4) Added a section to wsjtx-main.adoc for Linux Compile form Source. This
needs work as I basically pulled the steps from my local build script. While it
works nicely in unattended mode, in an interactive shell, it's not very tidy as
there are too many steps.

* (3.4) Install Package list should be fairly accurate, Ive' tested it on several
new installs, without iussue, once I had the kvasd deps figured out.


 


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3674 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-30 18:40:16 +00:00
Joe Taylor
93eecbf08e Previous commit message should also have mentioned:
5. F7 now toggles the Setup menu item "Double-click on call sets
   Tx Enable".  Present state is written to Status Bar label 3.

The present commit updates the makefiles.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3673 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-30 18:08:40 +00:00
Joe Taylor
f7e39a2009 1. Add "Utility Programs" section to User's Guide.
2. Change "Appendix x" section headings to useful descriptions.
3. Add KB1ZMX and W4TI to the WSJT-X "About" screen and Acknowledgments 
   in the User's Guide.  (Hope I didn't forget anyone -- please advise 
   if I did!)
4. A few more minor tweaks to User's Guide



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3672 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-30 18:03:21 +00:00
Joe Taylor
43664a2e01 Another round of documentation updates.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3669 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-29 20:50:18 +00:00
Joe Taylor
a47a4ee38b 1. Updated two screen pix in User's Guide.
2. Revise, revise, revise.  Good writing requires plenty of revisions!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3667 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-28 21:53:09 +00:00
Joe Taylor
8d6ea94d77 Another round of edits for the WSJT-X User's Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3666 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-28 15:24:26 +00:00
Joe Taylor
49fe4846ae Yesterday, forgot to add tx-rx.adoc to SVN. Here it is.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3665 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-28 13:12:19 +00:00
Joe Taylor
784e246557 1. Fix a bug that could cause decoder to hang when presented with
bad data.

2. Fix a bug that could allow a Koetter-Vardy false decode instead of
a valid Berlekamp-Massey decode, sometimes leading to program crash.

3. Many more edits in the User's Guide, *.adoc files.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3664 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-27 21:28:54 +00:00
Bill Somerville
fbe4a52f2f Bringing CMake scripts up to date.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3663 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-26 10:02:54 +00:00
Joe Taylor
b932baef5b Forgot to remove some test code from unpackcall.f90.
It's OK now.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3661 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-25 17:07:06 +00:00
Joe Taylor
051de6afd7 Fix a bug that can arise as a result of a false decode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3660 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-25 16:53:34 +00:00
Joe Taylor
e8fd1d5db7 Try linking to the new AsciiDoc-based User's Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3659 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-24 20:43:57 +00:00
Edson W. R. Pereira
12f15ab1e6 Test revision update
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3654 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-20 19:50:02 +00:00
Joe Taylor
15c102fad8 1. Corrected handling of compound callsigns: use JT65v1 encoding if
applicable, JT65v2 otherwise.  Thanks to DL9RDZ!

2. Fix a bug in flat3.f90, evident on OSX systems.  Thanks to G4KLA!

3. The Makefile now copy the jt9code executable into the destination
   directory for to-be-packaged executables.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3648 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-18 13:59:19 +00:00
Edson W. R. Pereira
e903647371 Added 3 missing files to lib/CMakeLists.txt
Added code to flush any queued spots to PSKReporter prior to a band change. This should prevent spots being reported on a wrong band.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3647 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-18 12:42:21 +00:00
Joe Taylor
e5b70db68e The explicit "connect" to on_cbFlatten_toggled seems not to be needed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3644 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-17 15:42:39 +00:00