Commit Graph

1193 Commits

Author SHA1 Message Date
Joe Taylor
e1b2bdef06 Fix a time delay introduced in refspectrum.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7778 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-03 15:21:38 +00:00
Joe Taylor
42ec06c9e1 Add checkBoxes to (potentially) replace the CTRL+M commands for minimizing window sizes. Suggestions for better positioning, etc, are welcome.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7769 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 19:05:52 +00:00
Joe Taylor
c61d328300 Remove a qDebug() flagging posts to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7758 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 13:37:29 +00:00
Bill Somerville
2687a308d6 Smarter Tx sequencing that allows for CAT processing latency
When using  split operating and/or rig  mode setting there is  a delay
before PTT  is asserted  while the CAT  commands are  processed. There
will even be  a small delay if  CAT is only used for  PTT. This change
waits for these  commands to be completed before starting  the user Tx
delay specified in the settings.

There is  a notable exception to  this in that DX  Lab Suite Commander
does not give us a way of knowing when CAT commands have actually been
completed.   This combined  with  the way  that  Commander spaces  CAT
commands, rather  than being paced  by the rig's CAT  responses, means
that delays of more than 1 second are likely. As most rigs suffer some
sort of ALC overshoot when PTT is asserted with audio already present,
it is strongly recommended not to use  the DX Lab Suite Commander as a
rig control proxy if your rig may  suffer ALC overshoot and you use an
external PA. Please note that using a typical RF power meter to detect
ALC  overshoots is  unwise  as  they are  rarely  fast  enough. It  is
probably wise to assume that all rigs suffer ALC overshoot since it is
very difficult to design an ALC loop that avoids it.

This change  also increases  the range of  the "Settings->Advanced->Tx
Delay" spin box to 0s up to 2s.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7756 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-07-01 00:19:58 +00:00
Joe Taylor
f6ecfec363 Add some timer calls; fix reporting of FT8 spots to PSKreporter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7755 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-30 20:11:07 +00:00
Joe Taylor
d94effcf41 Make FT8 available to all users, for testing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7750 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-29 15:16:02 +00:00
Joe Taylor
e20bd5eae1 Don't execute AutoSeq steps after sending a 73.
For FT8 mode:
  1. Open LU 13 in the proper way.
  2. Disable diagnostic LU 51.
  3. Add keyboard shortcuts CTRL+Plus, CTRL-Minus, to adjust audio Tx frequency
     in even 50 Hz steps.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7749 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-29 13:42:24 +00:00
Bill Somerville
7e77fb70bc Remove code that attempts to maintain on-air frequency for small QSYs
This feature is of limited  benefit and causes unexpected behaviour on
rigs with lower than 1Hz resolution. Removed for simplicity.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7743 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-28 01:54:35 +00:00
Joe Taylor
7e62880e2a More tweaks to GUI for FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7740 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-27 13:36:10 +00:00
Joe Taylor
023fceb620 Correct the displayed UTC for FT8 decodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7739 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 23:45:19 +00:00
Joe Taylor
8b6f3d8920 Fix behavior of RxFreq in FT8 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7738 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 19:33:26 +00:00
Joe Taylor
91fbeff072 Many GUI adjustments for FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7736 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-26 15:24:56 +00:00
Steven Franke
273e8de689 Restore normal Fast MSK144 transmission after toggling Fast box and/or after returning to MSK144 from FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-20 02:48:30 +00:00
Joe Taylor
5a9fdd1f34 Implement Tx for FT8. Not tested!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7730 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-19 20:38:03 +00:00
Joe Taylor
de3e975b98 1. ft8sim now generates 25 signals: f=300, 400, ... 2700 Hz.
2. ft8d is now a bare-bones multi-decoder.
3. wsjt-x now includes the bare-bones multi-decoder for FT8.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7729 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-19 20:15:43 +00:00
Joe Taylor
3ba80279ec Start a framework for FT8 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7727 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-17 15:55:30 +00:00
Joe Taylor
bb21ca949c Starting to insert FT8 into GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7726 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-17 13:48:45 +00:00
Joe Taylor
e53689b755 Back out the experimental changes of r7709.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7710 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-09 11:56:51 +00:00
Joe Taylor
b2873010cb Try making JT9C into a 15 s mode. Tx only is now implemented -- and not tested.
DO NOT USE ON THE AIR!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7709 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-08 19:54:37 +00:00
Joe Taylor
00719daac4 Working on a possible (and experimental!) slow MSK144 mode. *** DO NOT USE ON THE AIR! ***
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7707 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-06-07 19:58:25 +00:00
Bill Somerville
e6150df623 Proper custom spin boxes for frequency tolerance and T/R period
These were using a hijacked custom spin box that was designed only for
letters i.e. submodes. Now there are two new custom spin boxes.

HistedSpinBox:- can  be set with  a list  of integer values  which the
step  up and  down  will  follow. Optionally  limits  the maximum  and
minimum value  to the upper and  lower bounds of the  values set. Note
that intermediate values are still valid.

RestrictedSpinBox:- more like a combo  box because the provided values
are the only ones that can be set.

HintedSpinBox   is    used   for    the   frequency    tolerance   and
RestrictedSpinBox is used for T/R period.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7698 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-27 20:04:44 +00:00
Joe Taylor
bddcc32de0 Ensure correct text-window labels after changing mod4es.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7694 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-20 19:41:38 +00:00
Joe Taylor
9338cb52bb Correct the real-time filename being sent to wspr_fsk8d.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7693 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-19 15:52:48 +00:00
Joe Taylor
9e1a46f55d Fix the behavior of WSPR-LF (-fsk8) for real-time decoding.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7690 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 20:02:32 +00:00
Joe Taylor
9458acb01b Limit WSPR-LF frequency search range to 1600-1650 Hz. Enable S/N degradation.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7689 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 15:59:30 +00:00
Joe Taylor
fdad9be46d Fix an incorrect constant.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7688 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 02:21:39 +00:00
Bill Somerville
ed80f240e9 Add temporary simpler Tx scheduler for WSPR-LF
Until the advanced band hopping scheduler is upgraded to work with T/R
periods other  than 2  minutes this scheduler  uses a  strictly random
scheduler, except  that Tx percentages  less than 40 defer  Tx periods
that would otherwise be consecutive.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7687 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-18 01:52:30 +00:00
Joe Taylor
ec0278690c Fix the Tx duration in WSPR-LF (8-FSK) mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7685 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-17 14:43:16 +00:00
Joe Taylor
303eecdfd6 Make wspr_fsk8d search for DT as well as f0.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7681 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-17 13:13:11 +00:00
Bill Somerville
f7e8c81357 Prep for WSPR-LF tests.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7676 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-12 20:46:26 +00:00
Bill Somerville
503e8bca2d Fix "CQ NNN ..." with Tab 2 message scheme
More  to come  on this  but should  get Tab  2 basically  working with
MSK144 running from a calling frequency.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7675 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-12 20:46:19 +00:00
Joe Taylor
c6bd586d82 Implement (very basic) Rx capability for a potential WSPR-LF mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7673 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-12 14:39:38 +00:00
Joe Taylor
b3775f015a Implement Tx for WSPR-LF.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7670 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-11 19:56:18 +00:00
Bill Somerville
f7ff64bd6e Improve encapsulation and reliability of the wide graph 60m behaviour
The wide graph class handles 60m band behaviour of the minimum decoded
JT9 DF internally without leaking implementation details.

On 60m the lowest JT9 DF is always  zero and the spin box to set it is
disabled.  This reflects  that 60m  only has  narrow channels  and JT9
signals should share the same dial frequency as JT65 signals.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7668 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-05-07 15:14:42 +00:00
Joe Taylor
b256185ed1 Starting to implement experimental mode "WSPR-LF". Beware possible undesired side effects!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7658 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-04-28 16:49:09 +00:00
Joe Taylor
0673974954 Allow measuring refspec in fast modes. Better display format for phase coeffs.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7612 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-20 19:35:17 +00:00
Bill Somerville
8686876498 Do not use menu shortcut that hides shortcut key used in widgets
Ctrl+M (Cmd+M)  was being  used as  a menu shortcut  and in  key press
event  handlers   which  leads  to  inconsistent   behaviour  on  some
platforms. Removed menu action shortcut.

Also tidied up handling of the  hide controls menu action by making it
a checkable  action and using its  checked state to store  the control
hiding state.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7608 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-15 18:25:21 +00:00
Joe Taylor
5ff7b9ac79 Code cleanup following level meter changes. New screen shot for main-left controls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7597 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-06 15:52:09 +00:00
Joe Taylor
0e87c974e9 Modified behavior of audio level meter and adjacent slider; Tx6 at program startup.
1. Level meter range increased to 0-90 dB.
2. Level meter reading is independent of slider setting.
3. For a trial period: thermometer bar goes red if a 16-bit sample
   is within 5 dB A/D limit.
4. Slider can be used to adjust levels sent to waterfall.
5. Tx6 message is selected on program startup.
Thanks to W9MDB for most of this code.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7596 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-06 14:34:25 +00:00
Joe Taylor
220f03c7be When operating in JT9+JT65 mode, changing band to 60 m has moved the
"JT65 nnnn JT9" blue line to 0 Hz.  Now it also moves the spinner to
0 Hz, as it should have done.  Subsequent QSY to another band will reset
the blue line and spinner to where they had been, before the QSY to 60 m.
Thanks to W9MDB for this patch.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7595 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-03-03 15:11:32 +00:00
Bill Somerville
ab3f3f43e4 GNU gcc/g++ v6.x and Qt v5.8.x compatibility
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7588 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-28 19:13:49 +00:00
Bill Somerville
2131414791 Add reference spectrum to equalization plots and more plotting enhancements
Use  a header  format for  polynomial coefficients  that includes  the
valid  X  range  in  scaled  terms  and  a  count  of  the  number  of
coefficients.

Use double  precision consistently  for polynomial  coefficients. This
includes formatting with sufficient DPs when writing to files.

Many changes to the equalization plots, more to come.

Add  error   handling  for   reading  coefficient,  plot   and  filter
files.  This  includes  being  backward  compatible  for  old  format
refspec.dat files with no header.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7578 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-23 16:21:26 +00:00
Bill Somerville
cecc098924 First attempt at a UI phase compensation tool for MSK144
This builds on the static phase compensation in the MSK144 decoder and
the phase  analysis and  polynomial fitting  capabilities also  in teh
MSK144 decoder,  by allowing  captured data to  be selected  for phase
equalization from the WSJT-X UI.

Reads  captured phase  compensation  curve  estimate files  containing
fitted  polynomial coefficients  and measured  phase data  from MSK144
receptions. Intent  is to select a  compensation curve that is  from a
known transmitter like  an SDR which have good  phase linearity. Phase
plots and compensation polynomials may be viewed and compared with the
current compensation polynomial. A  suitable polynomial can be applied
to be use in all further decoding of MSK144 signals.

Plots of  the currently  selected polynomial  and its  modified higher
order terms  polynomial which is  actually used in  equalization (this
plot may  be dropped - it  is just for  kicks at the moment).   When a
captured phase analysis file is loaded plots of the measured phase and
the proposed best fit polynomial are shown.

Basic  maintenance  is also  included  allowing  clearing and  loading
captured  plots and  an option  to revert  to a  flat no  equalization
curve.

More to come on this as  amplitude equalization is also possible, this
will probably  be similar, maybe even  plotted on the same  graph with
dual  axes  for phase  and  amplitude.   Amplitude correction  from  a
measured  reference   spectrum  could  be  viewed   and  selected  for
equalization for all modes. TBC...

This   change    also   introduces    the   QCustomPlot    3rd   party
widget. Currently this  is statically linked from a  qcp library built
by the WSJT-X CMake script. This will probably be migrated to a shared
object (DLL) build as a CMake external project, once some CMake script
re-factoring  has been  completed,  which  is more  in  line with  the
QCustomPlot author's  intentions. This  will allow efficient  reuse in
other tools shipped with WSJT-X.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7570 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-21 02:13:13 +00:00
Joe Taylor
3c7e20b05b Better scheme for displaying QRA65 sync results.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7561 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-02-10 16:38:19 +00:00
Joe Taylor
bbe3cf9805 When logging, enforce QSO stop time >= start time.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7552 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-22 20:38:10 +00:00
Steven Franke
e45f7eaf67 After measuring phase response, write pcoeff file to the data directory.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7551 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-22 03:20:46 +00:00
Steven Franke
2644efc699 More work on Phase Equalization interface.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7506 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 22:13:59 +00:00
Steven Franke
c3d83a207a First steps to enable user control of phase calibration.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7504 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-15 21:43:40 +00:00
Bill Somerville
18a80232cc Filter general working frequencies in FreqCal mode
Allow band  drop down list to  be used to select  FreqCal frequencies,
also  resets position  in automatic  cycle. Tidy  up some  unnecessary
code.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7486 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-12 21:03:30 +00:00
Joe Taylor
247aa1a2ee Several changes to operational logic for FreqCal mode.
1. Menu item *Tools -> Execute frequency calibration cycle* is renamed and checkable.  Cycling does not start until checked.
2. Ctrl+F10 now allows you to cycle manually through the list of calibration frequencies.
3. Calibration sequence lengths can be set to 5, 10, 15, or 30 s with the sbTR spinBox.

Also: don't set sbTR index to 0 when entering a slow mode.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7485 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-12 18:21:58 +00:00