Commit Graph

1108 Commits

Author SHA1 Message Date
Joe Taylor
e21f69b5e9 Make the setting of *Enable AP for DX call* persistent.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7375 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-09 21:06:26 +00:00
Joe Taylor
82ecc6afcf Correct the sending of minsync to decoder. Fix statement ordering that affects timer calls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7370 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-08 15:38:54 +00:00
Bill Somerville
bae3b94fd6 Build a cache of allowed SSL exceptions and use them on future network requests
The   class  NetworkAccessManager   sub-classes  QNetworkAccessManager
adding  a  message  box  to  ask   the  user  if  SSL  errors  may  be
ignored. Ignored errors  are ignored in future server  replies so that
the user is not asked about he same peer certificate chain repeatedly.
The cache is currently per process only and not persistent.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7361 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-04 14:17:01 +00:00
Bill Somerville
2255b17e91 Add version and revision information to UDP heartbeat messages
Updated  UDP examples  to show  the version  and revision  information
received from clients.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7358 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-04 00:55:15 +00:00
Bill Somerville
ac859c8f68 Several rig control enhancements and fixes
Use the  new DX Lab Suite  Commander command option to  stop Commander
trying to change the rig Tx VFO mode when we don't want to. Requires a
recent DX Lab Suite Commander version.

All rig controllers  can now detect 20Hz resolution  rigs, still needs
2Hz resolution code which will be needed for the FT-891 AFAIK.

Enhance  the HRD  interface  to be  able to  use  the alternative  PTT
command as found on most Kenwood  rigs for audio source selection. Fix
Icom data mode selection issues.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7357 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-04 00:55:07 +00:00
Bill Somerville
fed0e9e171 Make handling of special CQ messages consistent
CQ NNN ... and CQ aa ... are  coalesced to CQ_NNN ... and CQ_aa ... so
as to keep the word count and indexes consistent with plain CQ ..., DE
... and QRZ ... standard message forms when parsing messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7356 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-04 00:54:58 +00:00
Joe Taylor
d972375792 Permit use of "CQ nnn" and AutoSeq in fast JT9 submodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7345 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 19:34:52 +00:00
Joe Taylor
8cf4fd2f8e No longer any need for the checkbox labeled "Rx frequency offset with CQ nnn" on the Settings -> General tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7343 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 16:20:57 +00:00
Joe Taylor
4838d97370 New parameters for AP decoding in QRA64. Do not use this revision on the air!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7340 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 15:50:47 +00:00
Bill Somerville
840163ab97 Change the "CQ nnn ..." logic to specify the calling frequency...
... rather than the working frequency.

Users set their working frequency and specify a calling frequency as a
kHz offset  into the  current Rx  MHz with the  main window  spin box.
Calling CQ on  the specified calling frequency is  enabled by checking
the associated option.

Also enhanced  the auto  sequencing to handle  short code  73 messages
correctly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7339 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 01:34:43 +00:00
Joe Taylor
0ae13699df Allow double-clicking in JTAlert to start a QSO. Please test!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7336 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-23 00:42:23 +00:00
Joe Taylor
d53085b552 Correct a flaw that could cause Tx to start as a result of a decode with AutoSeq active.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7329 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-22 15:47:59 +00:00
Joe Taylor
14d44f483b Display "OOO" at end of Tx message in status bar. Correct the logic for regenerating standard messages when "Enable VHF features" is changed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7324 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-21 15:46:17 +00:00
Joe Taylor
c8d7421ead Don't allow CW ID to extend Tx stop time beyond normal sequence boundary.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7323 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-19 18:28:14 +00:00
Bill Somerville
d416a0f5b4 Reset rig if it is found to be inactive
One reason  for inactivity is  that a calibration adjustment  has been
made.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7320 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 21:17:28 +00:00
Joe Taylor
2d3a96b009 Use ISO 8601 format for Date/Time in ALL.TXT.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7312 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 15:29:38 +00:00
Joe Taylor
8b7a7e795d After double-click on CQ message, don't change audio Tx freq if VHF features enabled. Temporarily(?), list Rx, Tx, and Calling freqs in Status Bar.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7311 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 15:00:15 +00:00
Joe Taylor
8e1378bce3 If Monitor was OFF at start of band_changed(), return it to OFF when this function returns.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7306 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-13 20:28:53 +00:00
Joe Taylor
80787c0721 New sync pattern for QRA64; implement fast-fading algorithm for QRA64A-C. Several things in QRA64 still need attention, in addition to submodes D and E!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7301 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-08 20:11:02 +00:00
Joe Taylor
026b9a3916 Correct a flaw in behavior of "Lock Tx=Rx" (Tnx to VK4EME). CR in DXCall entry ==> do "Lookup" (Tnx to W9MDB).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7297 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-07 13:47:09 +00:00
Bill Somerville
5152778813 Allow for new directional CQ messages in message processing
Also relax entry validation so it  is easier to enter standard message
forms longer than 13 characters into message entry line edits.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7294 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-05 19:41:03 +00:00
Bill Somerville
dc62eb04ad Increase the OpenMP stack size limit for jt9 threads from 2Mbyte to 4Mbyte
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7293 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-05 00:39:09 +00:00
Joe Taylor
cdaa64324a Add warning message if VHF features enabled on a lower band. Clean up "Decoded Lines" table in User Guide, and corresponding ISCAT end-of-line characters.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7283 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-03 14:05:05 +00:00
Joe Taylor
0f10da8e0e Reactivate the "Reference spectrum saved" message box.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7280 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-02 17:57:25 +00:00
Joe Taylor
744a82346e Fix UTC wrap-around problem with timing of CW ID. Fix WSPR label mi/km.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7276 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-02 12:38:18 +00:00
Joe Taylor
e0f80b7afc Correct a flaw in deep4 (apparently caused by gfortran optimizer?). Move
display of the "No More Files..." message until after the "Decode Finished"
message is received.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7270 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-31 14:24:02 +00:00
Joe Taylor
854d1287e4 I think this is better logic for enabling/disabling the checkbox that enables "CQ Rx nnn". Please check!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7269 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-30 23:52:25 +00:00
Joe Taylor
bc32b6a6ff Correct a bug that could switch to a JT65 shorthand message if Tx5 window
is edited to (say) "73 ...".


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7267 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-30 21:38:52 +00:00
Bill Somerville
cfb1a3cbe2 Use Qt signals to process configuration name changes
This change maintains the encapsulation  of the MultiSettings class by
using  a  signal   to  notify  clients  of  changes   to  the  current
configuration name.

Modifications  to   the  MainWindow  class  to   display  the  current
configuration name in the status bar, if it is not "Default", based on
MultiSettings events rather than polling for changes.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7257 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-28 17:15:04 +00:00
Joe Taylor
5fb0b05198 Fic label_7 for MSK144. User guide updates.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7256 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-28 15:33:56 +00:00
Joe Taylor
0c0e3ec978 Add a status bar label for configuration name (if other than "Default").
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7252 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-28 14:33:00 +00:00
Joe Taylor
bc1ffa6839 Remove more diagnostic prints.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7244 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 19:13:18 +00:00
Joe Taylor
da6c803e89 Remove diagnostic print.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7243 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 19:02:43 +00:00
Joe Taylor
a0d27d23f7 Introduce a 1-second delay before starting wsprd. (There is probably a better
way to make sure that the new .wav file is ready, before starting wsprd?)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7242 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 19:01:46 +00:00
Joe Taylor
1928850813 Correct some values of the m_hsymStop.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7236 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 16:11:21 +00:00
Joe Taylor
e7237a0fa4 Prevents auto power tune from resetting attenuation to 0 by default.
Fix autotune for tx pwr on band changes to keep current level if never set.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7233 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-25 22:49:20 +00:00
Joe Taylor
dcf8521c18 Minor tweaks to MDB patch and User Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7232 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-25 21:15:12 +00:00
Joe Taylor
0441986ccc Add the W9MDB patch (very slightly modified) for band-by-band memory
of power settings for Transmit and Tune.  Also an interim update of
v1.7_Features.txt.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7229 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-25 20:24:09 +00:00
Joe Taylor
a251c045e3 Rationalize several VHF-oriented features of the JT4 and JT64 decoders. More additions to the User Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7227 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 20:48:24 +00:00
Joe Taylor
e4d10d4f19 Clarify what VHF-enabled JT65 messages get sent to the right window.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7226 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 17:01:47 +00:00
Joe Taylor
87d4f2fdbc Use bVHF rather than single_decode to control display of params at end of decode line.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 15:25:25 +00:00
Joe Taylor
5b47bbf22e Don't display dupes in JT65, even if minsync<0. Use VHFfeatures rather than single_decode to control display of Tol, etc., in plotter.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7224 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-24 14:56:14 +00:00
Joe Taylor
c1d5531603 For now, we'll allow click-to-decode in ISCAT mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7218 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-21 18:07:12 +00:00
Joe Taylor
0388eb2cf3 Fix the display/hiding of decodedTextBrowser2 and dexpdedTextLabel2 wrt ISCAT.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7214 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-21 16:29:09 +00:00
Joe Taylor
d964805c85 Include four more items in the "displayWidgets" list.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7212 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-21 15:32:05 +00:00
Joe Taylor
f698c7b77d Correct the "warbling" Echo tone after doing a JT9-fast transmission.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7211 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-21 14:23:06 +00:00
Joe Taylor
91ea5ffa08 Major refactoring of code that determines visibility of GUI controls. Please report any undesired or incorrect behavior!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7209 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-20 19:25:48 +00:00
Joe Taylor
c2d2ec8dd7 Remove vestigial references to WSPR_2. Update wsjtx.pro. Add samples for all modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7208 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-20 15:43:03 +00:00
Joe Taylor
78840744cb Replace commented-out frequency-setting statement. Make sure that RxFreqSpinBox is visible in JT4 mode,
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7207 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-20 13:16:58 +00:00
Joe Taylor
ec2c5b78d4 correct a flaw in "Decode remaining files in directory"; correct the widget visibility in ISCAT mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7201 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-19 18:09:27 +00:00