Bill Somerville
8d7b9bba56
Revert to pre r8430 behaviour except when hound using FT8
...
The "Hold Tx Freq" check box allows one's Tx frequency to be fixed
when replying by double-clicking a decode. When in FT8 hound mode
one's Tx frequency is always held when double-clicking a decode unless
directed by internal logic to change. Direct Tx offset changes are
still allowed in hound mode, as are the normal waterfall clicks.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8490 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-11 02:29:27 +00:00
Joe Taylor
8a26e56b66
Prepare for v1.9.0-rc1 release candidate.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8487 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-09 17:49:40 +00:00
Joe Taylor
0db2356760
Tweak the "late start" logic.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8486 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-09 15:04:31 +00:00
Joe Taylor
cef0ba16e5
If Fox is using a directed CQ, display hound calls only if they comply.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8484 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-08 21:12:30 +00:00
Joe Taylor
64c0b304f1
Possible warning message for users of -devel and -rc? revisions.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8476 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-07 20:53:11 +00:00
Joe Taylor
5ae34503f3
Update some restrictions.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8474 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-07 19:11:04 +00:00
Joe Taylor
129e2b38d1
Correct the logic for deactivating Enable Tx for Hound.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8473 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-07 16:56:38 +00:00
Joe Taylor
ff0c97e2f1
Clean up what's displayed in yellow "Tx:" label for Fox transmissions.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8472 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-07 16:33:34 +00:00
Joe Taylor
6504085749
Update m_Nslots appropriately.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8471 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-07 16:17:40 +00:00
Joe Taylor
c81d17a5f4
Restrict Fox activity with Nslots>1.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8469 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-07 15:39:20 +00:00
Joe Taylor
23213b2204
Code cleanup.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8468 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-07 15:11:21 +00:00
Joe Taylor
da7da823cb
Remove the "single-click" patch, it appears to have problems.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-06 21:49:57 +00:00
Joe Taylor
444b054e24
Insert (inactive) code to forbid execution after an expiration date.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8463 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-06 20:53:33 +00:00
Joe Taylor
ebd7f465fd
As a trial: single-click on a decode to select a new DX Call; double-click to also Enable Tx.
...
Thanks to W9MDB for this patch, which also removes the option *Double-click on
call sets Tx Enable*. Please test and report any perceived issues!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8462 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-06 20:27:00 +00:00
Joe Taylor
a6f6554270
Minimize useless late starts of transmissions.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8459 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-05 20:13:16 +00:00
Joe Taylor
ece7dff7b3
To keep calling Fox, Hound must reactivate Enable Tx at least once every 2 minutes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8458 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-05 19:58:03 +00:00
Joe Taylor
8d13c8a9b4
Terminate on a specified condition.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8457 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-05 17:58:04 +00:00
Joe Taylor
f636ca4d8f
Improved wording for Hound-mode warning message.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8456 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-05 15:20:54 +00:00
Joe Taylor
9a4ddf269e
Reject message with ";" unless Hound mode selected or CRC10 matches DX Call.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8455 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-05 15:16:29 +00:00
Bill Somerville
3c384f7cbb
Add UDP message to set temporary Maidenhead locator
...
When "Auto Grid" is checked in "Settings->General" UDP messages of
type "Location" will update a temporary DE grid square. The intent is
to allow an external application joining the WSJT-X UDP message
protocol to dynamically update the DE grid during mobile operation.
This change also tidies up some outstanding issues around logging the
operator call.
This change adds a new UDP message "Logged ADIF" that is emitted in
parallel with "QSO Logged" messages. The new message is valid ADIF
file format and contains the logged QSO fields. The intent is that
basic UDP server applications might already have ADIF log record
capture capabilities and could use this message to feed existing ADIF
parsing routines to log QSOs. All that should be needed is to identify
this message type and the single field is ADIF compatible ASCII.
Thanks to Brian, N9ADG, for the patches that lead to these
enhancements.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8454 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-04 22:42:35 +00:00
Steven Franke
8b0d5c092d
Remove -d option from call to wsprd when Deep decoding is selected.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8453 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-03 22:35:34 +00:00
Joe Taylor
8d6faa7458
Disable AP decoding in FT8 DXpedition Fox and Hound modes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8451 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-02 21:17:16 +00:00
Joe Taylor
d1fa04c98c
Minor adjustments to auto-seq logic.
...
All 73 messages addressed to me shouls go to right panel' don't issue
certain duplicate RRR messages. Tnx to W9MDB.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8449 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-02 16:43:49 +00:00
Joe Taylor
d4e8e413c7
If Hold Tx Freq is unchecked, randomize Fox's Tx Freq in the range 300-600 Hz.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8448 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-02 16:02:00 +00:00
Joe Taylor
ec644ae5f6
Implement optional x4 tone spacing for FT8, JT9, WSPR. Also some code cleanup.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8447 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-02-02 15:18:39 +00:00
Joe Taylor
2fd2e0c7fe
Hide the "Hold Tx Freq" checkbox when in Hound mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8445 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-30 17:42:15 +00:00
Joe Taylor
ce63f97f09
Issue warning message when a DXpedition message is received in "normal" mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8444 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-30 17:27:16 +00:00
Joe Taylor
5d1df32387
Replace some temporarily removed code in ft8b, and some general cleanup.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8443 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-30 16:57:14 +00:00
Steven Franke
cdf32aedb0
Gray out Fast/Normal/Deep in JT65 V/U/M mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8439 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-26 21:35:52 +00:00
Joe Taylor
a55ad54a42
Update copyright notices.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8433 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-26 14:52:44 +00:00
Joe Taylor
5b4f4670d6
Include OPERATOR field in wsjtx_log.adi; emit OPERATOR field in the
...
logged_qso message; show the emitted logged_qso message (including
the operator field) in udp_daemon example code. Thanks to N9ADG for this code!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8432 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-25 21:57:21 +00:00
Joe Taylor
0831ea800a
Define bg colors in a way that works better for dark themes. Thanks to N7AJF!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8431 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-23 14:54:49 +00:00
Joe Taylor
a3fdcf7148
Issue warning if Log QSO is requested with DX Call field empty.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8430 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-22 19:45:51 +00:00
Joe Taylor
21faf3a9ad
Re-establish usage control.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8425 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-19 16:09:42 +00:00
Bill Somerville
9c99fac364
Fix a buffer overrun in the FT8 message generator
...
Thanks to Ian, KD8CEC, for diagnosing and contributing a patch for
this defect.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8422 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-19 13:54:05 +00:00
Joe Taylor
9381a13388
Deallocate the sw array on program exit.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8417 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-17 17:56:01 +00:00
Joe Taylor
99fdec2b23
Temporary commit of plotsave-related code. Not finished!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8414 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-17 15:32:45 +00:00
Steven Franke
11c2435b5d
Provide Fast/Normal/Deep options for wspr decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8413 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-14 18:12:41 +00:00
Bill Somerville
9832602632
Ensure Log QSO dialog has a taskbar icon as it is not modal
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8406 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-13 02:38:28 +00:00
Steven Franke
cb503e89f1
Make nutc print correctly when processing simulated JT65 files.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8386 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-01 17:03:55 +00:00
Steven Franke
ef044bc83b
Fix typo.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8385 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-01 15:48:38 +00:00
Steven Franke
0b7c02d2c9
Try to make split work when mode=FT8 and V/U/M is selected.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8384 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2018-01-01 15:39:06 +00:00
Steven Franke
39623417cf
Make NA VHF Contest mode visible in FT8 when VHF/UHF/Microwave features is selected.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8383 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-30 23:10:39 +00:00
Joe Taylor
ce5bfd4fe4
Identify Fox's Tx slot numbers in FoxQSO.txt.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8382 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-29 19:35:30 +00:00
Joe Taylor
ce0a92c123
Allow for possible "a3", etc., at end of lines decoded by Hound.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8381 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-29 18:26:10 +00:00
Joe Taylor
a08b30a1cb
Hound decodes should use the selected nfqso, to allow better use of AP.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8380 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-29 18:10:23 +00:00
Joe Taylor
0db5da0330
Restore warning message.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8379 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-28 19:26:20 +00:00
Joe Taylor
9e9bce2afc
Don't send illegal messages involving Type 2 compound callsigns!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8378 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-28 18:57:57 +00:00
Joe Taylor
4533696269
Restore a commented-out warning message.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8377 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-28 14:35:42 +00:00
Joe Taylor
d1be2506a9
Several enhancements to DXpedition mode:
...
1. Insert dummy report when Hound is called by complex-callsign Fox.
2. Allow Fox to transmit anywhere between 300 and 900 Hz.
3. Restrict randomized Hound freq to the range 1000 - 3000 Hz.
4. Suppress Fox signals that would be duplicates.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@8376 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-12-27 21:06:57 +00:00