w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2024-11-16 09:01:59 -05:00
Code Issues Packages Projects Releases Wiki Activity
9,181 Commits 5 Branches 98 Tags 208 MiB
ea3a6b272a
Commit Graph

920 Commits

Author SHA1 Message Date
Joe Taylor
7005ac3c50 Control "Call 1st" visibility with AutoSeq status in Q65 mode. 2020-12-19 09:10:34 -05:00
Joe Taylor
450249dd4c Add a DT label to the Q65 red sync curve. 2020-12-18 16:19:01 -05:00
Joe Taylor
67b82c7666 Remove the klunky 2D sync plot. The red sync curve is better. 2020-12-18 16:00:33 -05:00
Joe Taylor
5315bbd88a Don't erase the red sync curve too soon. 2020-12-18 15:14:17 -05:00
Bill Somerville
e7c8eba2a5
Initialize member variable in correct place 2020-12-18 19:59:25 +00:00
Joe Taylor
04b11fda14 Don't plot the green line if using Q65_Sync. 2020-12-18 14:01:10 -05:00
Joe Taylor
b3769bb6c8 For Q65, plot a red "Sync curve" in the Wide Graph. 2020-12-18 13:31:14 -05:00
Joe Taylor
8507a42655 Quasi-graphical display of the sync ccf(f0,DT). 2020-12-17 17:02:28 -05:00
Joe Taylor
7051dc7ee6 Remove more vestiges of the obsolete "JT9+JT65" mode. 2020-12-15 14:48:27 -05:00
Joe Taylor
c4dbfbbdca Must call wspr_config(false) when entering Q65 mode. 2020-12-09 13:55:47 -05:00
Bill Somerville
5b60ddada1
Merge branch 'feat-fst280' into develop 2020-12-09 15:33:58 +00:00
Joe Taylor
5b59633b2f Re-enable transmission in Q65 submodes B and higher. 2020-12-09 09:34:09 -05:00
Bill Somerville
7e1b74ecc0
Moon distance in astronomical data window, tnx Charlie, G3WDG 2020-12-08 00:01:46 +00:00
Bill Somerville
9c0fe669d6
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-12-07 20:43:49 +00:00
Bill Somerville
c9f9c1d7c8
Merge branch 'develop' into feat-fst280 2020-12-07 20:43:28 +00:00
Bill Somerville
b8f9708eac
Merge branch 'release-2.3.0' into develop 2020-12-07 20:43:03 +00:00
Bill Somerville
60792182ad
Environment variables to set audio buffer sizes and fix Windows Rx timing 
The two environment variables:

    WSJT_RX_AUDIO_BUFFER_FRAMES
    WSJT_TX_AUDIO_BUFFER_FRAMES

each can  be defined to  an integer number which  will be used  as the
suggested audio  buffer size for  Rx and Tx respectively.  Not setting
the variable  or setting  it to  zero or less  will cause  the default
buffer size to be used, which should be a good choice for most, if not
all, systems.
 2020-12-07 20:34:56 +00:00
Bill Somerville
0410f4718f
Merge branch 'release-2.3.0' into develop 2020-12-07 10:44:52 +00:00
Bill Somerville
cefc8e2645
Use the system localized short date format for Log QSO dialog dates 
This  brings these  fields  into line  with other  QSO  start and  end
date/time fields elsewhere in the user interface. Note that time entry
and edit fields  use a fixed hh:mm:ss 24-hour  clock format consistent
with UTC usage and of suitable accuracy for logging QSOs.
 2020-12-07 10:41:33 +00:00
Joe Taylor
d42363587e Swtich from a fast mode to Q65 now closes FastGraph and opens WideGraph, as it should. 2020-12-06 21:42:30 -05:00
Bill Somerville
3d9a099fce
Reinstate changes that were reverted from commit df2daf6 
Changes were moved aside to simplify a big merge commit with many
conflicts.
 2020-12-07 00:18:52 +00:00
Bill Somerville
2964bc6295
Merge branch 'develop' into feat-fst280 2020-12-06 22:27:07 +00:00
Bill Somerville
f290cec93b
Revert "Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls." 
This reverts commit df2daf60bd.
 2020-12-06 17:51:06 +00:00
Bill Somerville
06f9800b2f
Merge branch 'release-2.3.0' into develop 2020-12-05 18:43:00 +00:00
Joe Taylor
6416777278 Set ':' as the "mode character" for Q65. 2020-12-04 15:55:03 -05:00
Joe Taylor
7500adce8b Allow "@1500", etc., single-tone transmissions in Q65 mode. 2020-12-04 14:53:45 -05:00
Bill Somerville
f3a2c653aa
Revert to default o/s or Qt Tx audio buffer sizes 2020-12-04 18:59:41 +00:00
Bill Somerville
50d0543c03
Test version with environment variable to set Tx audio buffer size 
WSJT_TX_AUDIO_BUFFER_FRAMES takes the following values:

 -1          - use Qt/system default
 0           - use 200 mS (WSJT-X default)
 +ve integer - value is number of frames at 48 kHz

-1 is  likely to  be a  good choice on  Windows and  may macOS.  0 has
proven to be good on Windows. On Linux  0 may be OK but we need to try
other values.

The value is only a hint, the  actual value used along with the period
size (the  size of each chunk  of samples requested by  the system) is
printed  in an  info level  diagnostic message  at the  start of  each
transmission.
 2020-12-03 01:49:21 +00:00
Bill Somerville
94f0af72e3
Command line tool prints WSJT-X version to console, tnx Dave, W3DJS 2020-12-02 01:57:32 +00:00
Bill Somerville
7f1a537e6e
Fix up versioning after merge from release branch 2020-12-01 16:06:56 +00:00
Bill Somerville
4492d8e977
Add tool-tip for "Best S+P" push-button 2020-12-01 15:47:07 +00:00
Bill Somerville
2db2884c39
Fix regression with selecting a working frequency when changing mode 2020-12-01 15:11:36 +00:00
Bill Somerville
6a44e68033
Repair regression that stopped Best S&P transmitting on a match 
This change also ensures that second or subsequent matches in the same
T/R period do not trigger a QSO with a new QSO partner.
 2020-11-27 12:36:24 +00:00
Bill Somerville
3663b3ea32
MultiGeometryWidget template class abstracts window geometry changes 2020-11-27 01:14:12 +00:00
Bill Somerville
0fc5639fd5
Repair a regression causing missing Rx decode timestamps in ALL.TXT 2020-11-18 02:06:30 +00:00
Joe Taylor
abe06e5dbb Access Q65 Quick-Start Guide from Help menu. 2020-11-17 10:46:20 -05:00
Bill Somerville
a1808c99f7
Fix issue with main window height growing on restart 2020-11-17 00:55:24 +00:00
Joe Taylor
eeed375baf Tell user to go back it he selects F+H in a mode other than FT8. 2020-11-16 16:28:37 -05:00
Bill Somerville
f10d6fb712
Fix regression in hiding Rx Frequency window titles & headings 2020-11-16 17:36:50 +00:00
Bill Somerville
3cd567e464
Allow decodes window splitter widget to shrink its height further 2020-11-16 17:24:10 +00:00
Joe Taylor
7f772ecc53 Don't set a global minimum height: SWL mode wants much less. 2020-11-16 11:49:01 -05:00
Joe Taylor
bbcc9419b4 Set a mainwindow minimum height. 2020-11-16 10:37:09 -05:00
Joe Taylor
df2daf60bd Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls. 2020-11-16 10:06:10 -05:00
Bill Somerville
09a8b3f5ef
Reinstate RC nag 2020-11-15 01:12:55 +00:00
Bill Somerville
21e7560b89
Simplify logging of missing/extra audio input samples 
These warnings and errors  now go to the the system  log rather than a
MessageBox.
 2020-11-14 20:50:27 +00:00
Joe Taylor
dc64e46620 Restore submode on program restart. 2020-11-13 13:39:32 -05:00
Bill Somerville
9ea903b259
Merge branch 'develop' into feat-boost-log 2020-11-12 13:36:25 +00:00
Bill Somerville
dc169c3a84
Resolve some issues with sequencing of R+rprt and sign-off messages 2020-11-12 13:32:56 +00:00
Bill Somerville
c7f2fdc404
Ensure Tx1 message is used by non-standard callsign holders 
The only exception is type 2 prefix/suffix calls in non-77-bit modes.
 2020-11-12 13:30:48 +00:00
Joe Taylor
3068f0c61f Use genwave() to create Q65 audio signal. Send "include averaging" flag to Q65 decoder. 2020-11-11 11:14:02 -05:00
Bill Somerville
de0af5a2ed
Merge branch 'feat-outgoing-udp-interface' into develop 2020-11-10 20:09:48 +00:00
Bill Somerville
ab780a324a
Testing options 
Two new environment variables to control special testing behaviour:

    * WSJT_TX_BOTH - set to "1" to force transmission on both periods.

    * WSJT_REVERSE_DOPPLER - set to "1" to transpose Tx and Rx Doppler
      corrections. Use this to test Doppler tracking on a terrestrial
      link.
 2020-11-06 18:28:59 +00:00
Bill Somerville
caa23f1101
Message Client allows sending multicast UDP on multiple interfaces 2020-11-05 03:37:01 +00:00
Joe Taylor
860b0ce21e Include TRperiod in the Q65 status bar label. 2020-11-03 15:49:24 -05:00
Bill Somerville
8516a4f538
New combo box with a list of checkable items 2020-11-03 20:28:29 +00:00
Bill Somerville
430d57c1ca
Network interface selection for outgoing UDP multicast datagrams 
Default  selection  is  the  loop-back interface.  Users  who  require
interoperation  between  WSJT-X   instances  cooperating  applications
running on different hosts should  select a suitable network interface
and  carefully choose  a multicast  group address,  and TTL,  that has
minimal scope covering the necessary  network(s). Using 224.0.0.1 is a
reasonable    strategy    if   all    hosts    are    on   the    same
subnet. Administratively  scoped multicast group addresses  like those
within 239.255.0.0/16  can cover larger  boundaries, but care  must be
taken if the local subnet has access to a multicast enabled router.

The  IPv4  broadcast  address  (255.255.255.255) may  be  used  as  an
alternative  to multicast  UDP, but  note that  WSJT-X will  only send
broadcast UDP datagrams  on the loop-back interface,  so all recipient
applications must be running on the same host system.

The reference UDP Message protocol  applications are being extended to
be configurable  with a list of  interfaces to join a  multicast group
address on. By default they will only join on the loop-back interface,
which is also  recommended for any applications designed  to take part
in the WSJT-X  UDP Message Protocol. This allows full  user control of
the  scope of  multicast  group membership  with  a very  conservative
default  mode  that will  work  with  all interoperating  applications
running on the same host system.
 2020-11-02 15:33:44 +00:00
Joe Taylor
20b6d65c61 Allow WSJT-X to generate the new Q65 code. Loopback Q65 QSOs now work. 2020-10-28 12:04:43 -04:00
Joe Taylor
ef2c63af29 Enable some changes for Q65 submodes F, G, H. (They won't decode without additions to the core Q65 decoder.) 2020-10-25 15:44:52 -04:00
Joe Taylor
7a22e6a2e1 Change the Q65 value of nsps from 7680 to 7200. 2020-10-25 14:10:38 -04:00
Joe Taylor
9b452e8f99 Change mode name QRA65 to Q65 everywhere, supposedly. 2020-10-25 13:58:18 -04:00
Joe Taylor
b68ccee2fa Correct a flaw in assigning bin numbers for in sync64(), fixing QRA65 submodes B C D E. 2020-10-22 14:05:20 -04:00
Bill Somerville
c444cb2409
Merge branch 'release-2.3.0' into develop 2020-10-21 13:37:37 +01:00
Bill Somerville
2a2e120d7c
Repair invalid string references 2020-10-21 13:09:10 +01:00
Bill Somerville
adcb021941
Compatibility with older Qt versions 2020-10-20 02:21:54 +01:00
Bill Somerville
9b1695285d
Compatibility with older Qt versions 2020-10-20 02:21:08 +01:00
Bill Somerville
ccb7a1adf5
Repair defect with response to UDP Reply(4) messages with AP markers 2020-10-18 02:11:04 +01:00
Bill Somerville
8d088cf4f5
Repair defect with response to UDP Reply(4) messages with AP markers 2020-10-18 02:09:17 +01:00
Bill Somerville
40ac1f2e41
Merge branch 'develop' into feat-boost-log 2020-10-14 21:02:00 +01:00
Bill Somerville
c50133bcfc
Honour "Settings->General->Disable Tx after sending 73" if not auto-sequencing 2020-10-14 21:01:05 +01:00
Bill Somerville
62e089aecf
Honour "Settings->General->Disable Tx after sending 73" if not auto-sequencing 2020-10-14 20:59:32 +01:00
Bill Somerville
d8b16b31f4
Merge branch 'develop' into feat-boost-log 2020-10-13 19:20:37 +01:00
Bill Somerville
90b3fa2a46
Merge branch 'release-2.3.0' into develop 2020-10-13 16:51:40 +01:00
Bill Somerville
518207da3b
Various updates to UDP Message Protocol handling for FST4W 
Corresponding updates to the message_aggregator reference application.
 2020-10-13 16:46:38 +01:00
Bill Somerville
dcc9ac11ee
Merge branch 'develop' into feat-fst280 2020-10-10 15:26:17 +01:00
Bill Somerville
c551b93cc7
Merge branch 'develop' into feat-boost-log 2020-10-10 14:07:22 +01:00
Bill Somerville
1995d762bb
Add Version Info resources to Windows executables where needed. 
Version information  and more  in the  Windows resources  for main
    applications, installer and un-installer.

    Update  CMake   policies  for  new  project()   command,  and  DEB
    dependency changes

    Support  older  libgfortran  packages,  and  other  Linux  package
    dependencies.

    Use new project description file in Debian packaging.

    Linux packaging dependency adjustments  for Debian style packages,
    including  a machine  readable  Debian  copyright format,  project
    description in separate file for  CPack compatibility, and use for
    DEB packaging.

    Configure check for need to link libm Standard C Math Library.

    CMake compatibility for <3.17.
 2020-10-10 13:58:53 +01:00
Bill Somerville
5f2ba00bb8
Add Version Info resources to Windows executables where needed. 
Version information  and more  in the  Windows resources  for main
    applications, installer and un-installer.

    Update  CMake   policies  for  new  project()   command,  and  DEB
    dependency changes

    Support  older  libgfortran  packages,  and  other  Linux  package
    dependencies.

    Use new project description file in Debian packaging.

    Linux packaging dependency adjustments  for Debian style packages,
    including  a machine  readable  Debian  copyright format,  project
    description in separate file for  CPack compatibility, and use for
    DEB packaging.

    Configure check for need to link libm Standard C Math Library.

    CMake compatibility for <3.17.
 2020-10-10 13:38:15 +01:00
Bill Somerville
ed92d0811a
Implement "No own decodes" functionality for FST4W mode 2020-10-10 13:18:04 +01:00
Bill Somerville
bb8e6ea64a
Missed merge from develop branch conflict resolved 2020-10-06 19:55:43 +01:00
Bill Somerville
314be8ccb7
Merge branch 'develop' into feat-fst280 2020-10-06 19:25:06 +01:00
Bill Somerville
6e75a62811
Correct mode switching for QRA64 and QRA65 2020-10-06 18:38:18 +01:00
Joe Taylor
db1a24f1d4 Update WideGraph parameters when entering QRA64 mode. 2020-10-06 11:07:08 -04:00
Joe Taylor
f38f355395 Many tweaks to QRA64 decoder to optimize processing of 6m ionoscatter signals. 2020-10-05 09:50:55 -04:00
Joe Taylor
c17acdb447 Activate Fast and Normal decode options for QRA64. 2020-10-05 09:48:44 -04:00
Bill Somerville
522000cfab
Added SWL Mode to View menu 
SWL mode  hides all lower  panel widgets,  maximizing the size  of the
decodes windows.  Designed for operators running  several instances to
monitor multiple bands and modes.
 2020-10-04 23:05:17 +01:00
Bill Somerville
45e472979e
Merge branch 'release-2.3.0' of bitbucket.org:k1jt/wsjtx into release-2.3.0 2020-10-04 22:48:08 +01:00
Bill Somerville
f8e5903f83
Merge branch 'develop' into feat-boost-log 2020-10-04 22:47:01 +01:00
Bill Somerville
add63fb374
Adapt WSPRnet.org spotting to moveable Rx analysis window 
This allows spots at any frequency to be posted rather than just those
in the 1400 to 1600 Hz range above the VFO dial frequency.
 2020-10-04 22:41:52 +01:00
Joe Taylor
df034cf9b5 Don't set TxFreq and RxFreq defaults on QRA64 startup. 2020-10-04 16:10:44 -04:00
Bill Somerville
a169b5daf8
Added SWL Mode to View menu 
SWL mode  hides all lower  panel widgets,  maximizing the size  of the
decodes windows.  Designed for operators running  several instances to
monitor multiple bands and modes.
 2020-10-04 00:46:59 +01:00
Joe Taylor
ada4f6798e Reduce FLow/FHigh step size to 50. 2020-10-03 08:31:01 -04:00
Bill Somerville
837821b117
Merge branch 'develop' into feat-boost-log 2020-10-01 19:55:53 +01:00
Bill Somerville
0c0adbdaab
Fix widget foreground when forcing the background colour 
This is  required so as  to maintain good contrast  between foreground
and background  elements when  the widget  colour palette  is changed,
e.g. when using a lights out style sheet.
 2020-10-01 12:58:09 +01:00
Joe Taylor
9200c3e27a Add NB = -3% option to cycle through NB=0, 1, 2, 3, ... 20%. 2020-09-30 13:32:03 -04:00
Joe Taylor
b56ce23f38 Implement optional x2/x4 tone spacings for FST4 and FST4W. 2020-09-30 10:01:57 -04:00
Joe Taylor
541c1ddea6 Fix the problem of FST4W transmitting on the FST4 TxFreq after mode switch. 2020-09-30 09:37:15 -04:00
Joe Taylor
a7d5c3b03e Shift+Click on waterfall now sets TxFreq in FST4W mode. 2020-09-29 13:20:14 -04:00
Joe Taylor
b99aafa336 On change of TxFreq during an FST4 transmission, regenerate the Tx waveform and restart. 2020-09-29 13:00:57 -04:00
Bill Somerville
6b0033c128
Merge branch 'release-2.3.0' into develop 2020-09-29 12:39:26 +01:00
Bill Somerville
22dbe9f14e
Move FST4W to the same section as WSPR in the mode pop-up menu 2020-09-29 12:38:15 +01:00
Bill Somerville
6f7d1e9968
Merge branch 'release-2.3.0' into develop 2020-09-29 12:34:39 +01:00
Bill Somerville
204d63929d
Repair a regression with odd/2nd period FT4 decode timestamps 
Generalized slow mode decode timestamp generation to a common routine.
 2020-09-29 12:32:47 +01:00
Bill Somerville
7a56acfe35
Merge branch 'develop' into feat-boost-log 2020-09-27 01:45:29 +01:00
Bill Somerville
1ae96dc672
Disable RC nag message 2020-09-27 00:42:25 +01:00
Bill Somerville
7f22d3c5a6
Merge branch 'develop' into feat-boost-log 2020-09-27 00:30:32 +01:00
Joe Taylor
c3d8e4dd73 Working on QRA65, including simulator and test program. 2020-09-26 16:49:06 -04:00
Bill Somerville
24b9da7c1b
Enable RC nag message and time limit 2020-09-26 21:09:45 +01:00
Bill Somerville
32036cd36f
Correct slot function signatures due to Raspberry Pi compile error 2020-09-26 21:08:43 +01:00
Joe Taylor
acd6253373 A few more fixups for QRA65. Not finished, yet! 2020-09-25 15:38:20 -04:00
Joe Taylor
7fd2f1afe6 Change QRA66 to QRA65, on the C++ side. 2020-09-25 13:20:46 -04:00
Bill Somerville
e50e712fdd
Start using class NonInheritingProcess 2020-09-24 17:57:06 +01:00
Joe Taylor
dd296311cc Disable TxFreqSpinBox, not RxFreqSpinBox if QSY during transmit is not allowed. 2020-09-22 11:25:59 -04:00
Joe Taylor
9fe2fc6de0 Fix two problems: sometime incorrect setting of RxFreq in WideGraph, and incorrect timestamp for FST4W-120 and FST4W-300 decodes in ALL.TXT. 2020-09-21 14:35:16 -04:00
Bill Somerville
542ffe8311
Improve audio device handling and error recovery 
where possible  audio devices that  disappear are not  forgotten until
the user selects another device, this should allow temporarily missing
devices or forgetting  to switch on devices before  starting WSJT-X to
be  handled more  cleanly. If  all else  fails, visiting  the Settings
dialog and  clicking OK should  get things  going again. Note  that we
still  do not  have  a  reliable way  of  detecting  failed audio  out
devices, in that  case selecting another device and  then returning to
the original should work.

Enumerating  audio devices  is expensive  and on  Linux may  take many
seconds per  device. To avoid  lengthy blocking behaviour until  it is
absolutely necessary,  audio devices are  not enumerated until  one of
the "Settings->Audio" device drop-down lists is opened. Elsewhere when
devices  must be  discovered  the  enumeration stops  as  soon as  the
configured device is  discovered. A status bar message  is posted when
audio devices are being enumerated as a reminder that the UI may block
while this is happening.

The message box warning about  unaccounted-for input audio samples now
only triggers when  >5 seconds of audio appears to  be missing or over
provided. Hopefully this will make the warning less annoying for those
that are  using audio sources  with high and/or variable  latencies. A
status  bar message  is still  posted for  any amount  of audio  input
samples  unaccounted for  >1/5 second,  this message  appearing a  lot
should be considered as notification that  there is a problem with the
audio sub-system, system load is  too high, or time synchronization is
stepping the PC clock rather  than adjusting the frequency to maintain
monotonic clock ticks.
 2020-09-20 18:20:16 +01:00
Joe Taylor
1ab59a8d6b Fully configure WideGpahe after switching to JT65 mode. 2020-09-20 10:17:27 -04:00
Joe Taylor
327808a0bb One more try at fixing the Fmax() startup problem that Steve sees. 2020-09-18 13:33:30 -04:00
Joe Taylor
52bdd57e57 Implement NB=-1%, NB=-2%. Fix a startup problem with WideGraps's fMax value. 2020-09-18 11:30:23 -04:00
Joe Taylor
41aa5dae74 Make the FTol control invisible in FST4 if Single decode is not checked. 2020-09-17 12:58:59 -04:00
Joe Taylor
e60fc1ca19 FST4 GUI controls for FLow, FHigh, should disappear when Single Decode is checked. And some related improvements. 2020-09-16 20:16:32 -04:00
Joe Taylor
21dc6a5c59 Connect the FLow and FHigh limits for FST4 decoding. 2020-09-16 17:23:59 -04:00
Joe Taylor
2266e8dbb7 Add FLow and FHigh spinner controls to set the FST4 decoding range. 2020-09-16 17:02:40 -04:00
Bill Somerville
abe470b24a
Fix a typo 2020-09-15 15:53:14 +01:00
Bill Somerville
e4eb6eb94e
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-09-15 10:31:04 +01:00
Joe Taylor
3886411fad Two more corrections to mode-switch settings of GUI controls in FST4/FST4W. 2020-09-14 13:55:30 -04:00
Joe Taylor
f20c45c167 FST4: Align WideGraph green bar with RxFreq on startup. CTRL-diouble-click on waterfall sets FTol=10 and calls decoder. 2020-09-14 10:56:54 -04:00
Joe Taylor
8f554321c8 Make sure that Tx audio frequency in FST4 mode comes from FST4 TxFreq spinner, not the WSPR/FST4W spinner. 2020-09-14 09:55:33 -04:00
Bill Somerville
5014c62bfa
Notify user when enumerating audio devices 2020-09-13 17:12:11 +01:00
Joe Taylor
39403c2520 Expand the range of allowable values for TxFreq in FST4W. 2020-09-13 09:38:39 -04:00
Bill Somerville
e096b77bc1
Ensure default FTol spin box range covers all possible values 
This allows persistence between sessions to work correctly.
 2020-09-12 15:58:25 +01:00
Joe Taylor
174893395b Ensure sending correct FTol value from GUI to decoder for FST4. 2020-09-12 09:54:13 -04:00
Joe Taylor
bcdaf395f1 Must set m_bFastMode=false for FST4. Fixes the reported "Hold Tx frequency" issue. Also, ensure display of WideGraph rather than FastGraph for FST4, FST4W. 2020-09-12 09:35:32 -04:00
Bill Somerville
66e887b2f9
Merge branch 'develop' into feat-dropped-frames 2020-09-12 00:19:04 +01:00
Bill Somerville
6ca77f0245
Restore deleted action 2020-09-11 20:15:21 +01:00
Bill Somerville
5fdcd8c15a
Merge branch 'develop' into feat-fst280 2020-09-11 20:06:20 +01:00
Joe Taylor
20085e0ec8 Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-09-11 09:14:24 -04:00
Joe Taylor
2a1ef287a6 Add 300 and 400 Hz to the list of available FTol values for FST4. 2020-09-11 09:13:11 -04:00
Bill Somerville
7d63ef12fa
Remove unused actions from MainWindow UI source 
Correct a typo as well.
 2020-09-11 12:53:44 +01:00
Joe Taylor
e23f7b3434 Don't round off the FST4W RxFreq when FTol is changed. That was a bad idea. 2020-09-10 13:48:08 -04:00
Joe Taylor
b7dc101270 Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-09-10 13:34:54 -04:00
Joe Taylor
b6f990fac2 Allow FTol values down to 1 Hz; let maximum FTol values for FST4 depend on TRperiod. 2020-09-10 13:33:33 -04:00
Bill Somerville
67bd56a6d6
Accessibility improvements 2020-09-10 16:29:51 +01:00
Bill Somerville
ae4cfaf1ae
Start Fox mode on correct tab of tab widget 2020-09-08 21:19:48 +01:00
Bill Somerville
db6a432a33
Ensure band/frequency combo box edit styling tracks current frequency 2020-09-08 15:24:55 +01:00
Bill Somerville
1d52daf7ee
Remove erroneous Qt emit keywords 2020-09-08 12:54:19 +01:00
Joe Taylor
72cffc9da4 Make the FST4/FST4W Quick-Start Guide available from the Help menu. 2020-09-06 13:31:19 -04:00
Joe Taylor
4ab8780dd8 Code cleanyup associated with removing Tab 2. 2020-09-05 15:22:18 -04:00
Joe Taylor
7aeb9d5e2e Remove the "Tab 2" option for generating Tx messages. 2020-09-05 15:11:32 -04:00
Joe Taylor
403d3a1041 Make "double-click on call" work in FST4 as in oter modes. 2020-09-05 14:09:33 -04:00
Joe Taylor
844fe26368 Fix "on_actionFST4_triggered()" so that it does not call another mode setup routine. 2020-09-05 11:53:23 -04:00
Joe Taylor
c1025b7c4c Allow user to set center frequency and FTol in FST4W mode. Needs more testing! 2020-09-05 10:34:55 -04:00
Joe Taylor
02928787b1 Save and restore the current setting of the FST4W RoundRobin control. 2020-09-04 15:38:04 -04:00
Joe Taylor
f24d15b16e Eliminate the FST4/FST4W submodes with hmod > 1. 2020-09-04 15:15:30 -04:00
Bill Somerville
dc423ff28b
Documentation updates for On DX Echo Doppler correction mode 
Tnx Charlie, G3WDG, and Bob, KA1GT.
 2020-09-03 19:38:40 +01:00
Bill Somerville
c5349f8da9
Dynamic update of on DX echo Doppler shift correction 
Tnx Bob, KA1GT, and Charlie, G3WDG.
 2020-09-02 21:25:58 +01:00
Bill Somerville
a623ed0baf
Ensure band/frequency combo box edit shows correct band 2020-09-02 21:08:25 +01:00
Bill Somerville
56741d5e10
Merge branch 'develop' into feat-dropped-frames 2020-08-29 14:05:52 +01:00
Bill Somerville
64f29318aa
Repair an auto-sequencing defect with UDP Reply message handling 2020-08-29 14:04:29 +01:00
Bill Somerville
3a71184040
Include period start time in dropped samples message box details 2020-08-22 18:12:12 +01:00
Bill Somerville
d1860df190
Only send local station info to PSK Reporter when necessary 
Remove unneeded debug trace messages.
 2020-08-18 12:47:17 +01:00
Bill Somerville
4a2a181528
Merge branch 'develop' into feat-fst280 2020-08-17 18:33:00 +01:00
Bill Somerville
b1c53bc332
Fix a cosmetic FT6 DXpedition mode Hound issue that causes an assert 2020-08-17 01:52:47 +01:00
Bill Somerville
536e6568a6
FST4* messages do not need padding out to 37 characters 2020-08-16 02:34:18 +01:00
Bill Somerville
50da40413f
PSK Reporter connection opened & closed at the correct times 2020-08-16 00:38:19 +01:00
Bill Somerville
491a7b9a05
Ensure no connect with, or traffic to, PSK Reporter if not enabled 2020-08-15 23:32:10 +01:00
Bill Somerville
b984390711
Fix PSK Reporter spots of FST4W decodes with power <10 dBm 2020-08-15 23:29:53 +01:00
Bill Somerville
632e2c2ae9
Merge branch 'develop' into feat-dropped-frames 2020-08-15 20:03:47 +01:00
Joe Taylor
dad9199f24 Disable double-clicking on an FST4W decode. It serves no useful purpose. 2020-08-15 14:31:18 -04:00
Bill Somerville
ec623deb9f
More consistent Tx Next button behaviour 2020-08-15 15:57:29 +01:00
Bill Somerville
e17ad223ae
Tx Next button enables automatic Tx 
Also a  number of WSPR/FST4W  code clean-ups including getting  the Tx
Next button to function as intended.
 2020-08-15 02:57:23 +01:00
Bill Somerville
7eb229ecde
Reduce Tx audio buffer size improve Pwr control granularity 2020-08-13 10:31:23 +01:00
Bill Somerville
11abe7c60f
Cosmetic reformating 2020-08-13 10:30:49 +01:00
Bill Somerville
185f570136
Avoid accessing shared memory after it has been deleted 2020-08-11 20:07:00 +01:00
Bill Somerville
e27b09b590
Revert Tx status widget on status bar to non-permanent placement 2020-08-11 16:09:51 +01:00
Bill Somerville
8e37dbd8c1
Increased threshold for status message and warning on dropped frames 2020-08-11 16:08:21 +01:00
Bill Somerville
0cf14dfcc9
Remove user adjustable audio buffer sizes from Settings 
Fixed buffer sizes are  used. Rx use s 3456 x 1st  downsample rate x 5
audio  frames  of  buffer  space.  On Windows  this  means  that  each
chunk (periodSize())  delivered from the  audio stream is  our initial
DSP processing chunk size, thus  matching audio buffer latency exactly
with WSJT-X's  own front  end latency. This  should result  in optimal
resilience to high system loads that might starve the soundcard ADC of
buffers to fill and case dropped audio frames.

For Tx  a buffer sufficient for  1 s of  audio is used at  present, on
Windows  the period  size will  be  set to  1/40 of  that which  gives
reasonably low latency  and plenty of resilience to  high system loads
that might  starve the soundcard DAC  of audio frames to  render. Note
that a 1 s  buffer will make the "Pwr" slider slow  to respond, we may
have to reduce the Tx audio buffer size if this is seen as a problem.
 2020-08-11 13:48:01 +01:00
Bill Somerville
1892f39df3
Revert "TEMPORARY: Diagnostic routine for the "Save All" missing files problem." 
This reverts commit b5765401dc.
 2020-08-10 01:42:26 +01:00
Joe Taylor
b5765401dc
TEMPORARY: Diagnostic routine for the "Save All" missing files problem. 2020-08-09 22:50:17 +01:00
Joe Taylor
07f63cdb63 Small adjustment to make file names for QRA66-30 modes correct. 2020-08-09 15:48:56 -04:00
Joe Taylor
42626009b5 TEMPORARY: Diagnostic routine for the "Save All" missing files problem. 2020-08-09 14:21:25 -04:00
Joe Taylor
de0476bf3c More changes to allow longer sequences in QRA66 mode. 2020-08-08 16:53:28 -04:00
Bill Somerville
ecf0a146f1
Merge branch 'develop' into feat-dropped-frames 2020-08-08 21:26:51 +01:00
Bill Somerville
94d66bc848
Make FST4W scheduling l10n agnostic 2020-08-08 21:25:32 +01:00
Bill Somerville
2e413713a3
Tidy dropped frame status bar message 2020-08-08 19:40:42 +01:00
Joe Taylor
d683cb6b8e Updates to GUI for different QRA66 sequence lengths and submodes. 2020-08-08 14:37:01 -04:00
Bill Somerville
02e19b687f
Status message to report approximate # of dropped Rx audio frames 
This is  a first cut  at this to  evaluate buffer size  adjustments on
supported platforms. A final version might limit status bar reports to
>1000 dropped frames or similar.
 2020-08-08 17:12:48 +01:00
Bill Somerville
a0ceace5b4
User configurable audio device buffer sizes 
Adjusting these may help with  audio drop-outs, particularly on slower
CPU systems or heavily loaded systems. Smaller buffer sizes leave less
margin for  process interruptions,  larger sizes waste  resources that
could impact other processes.
 2020-08-08 16:25:14 +01:00
Bill Somerville
f975f2c181
Further widget contrast improvements for use with dark stylesheets 2020-08-08 15:06:31 +01:00
Joe Taylor
bf38f4416c Modifications to give QRA64 use of longer TR periods and tone-spacing submodes. Noy yet finished, or tested! 2020-08-08 09:14:12 -04:00
Bill Somerville
bf58cd43aa
Improve contrast of coloured widgets in dark style 2020-08-08 13:20:52 +01:00
Bill Somerville
0ba5d7e1bf
More flexibility for QDateTime round/truncate routine 2020-08-07 21:31:48 +01:00
Joe Taylor
7256d70016 QRA66: change NSPS from 1920 to 1800. TxT=85*1800/12000=12.75 s. 2020-08-05 11:06:18 -04:00
Joe Taylor
2bb9566731 In QRA66 mode, make unused widgets invisible. 2020-08-05 09:37:03 -04:00
Joe Taylor
88102af49d Fic the transfer of ntol from GUI to qra66_decode(). 2020-08-04 12:53:37 -04:00
Joe Taylor
aff22a904d Better marking of QRA66 Rx freq range and Tol on Wide Graph. 2020-08-04 11:51:40 -04:00
Bill Somerville
09dc647c12
Make tool-tips more generic on T/R period 2020-08-04 11:49:33 +01:00
Bill Somerville
d2525c73a3
Minor cosmetic main layout changes 2020-08-04 11:44:26 +01:00
Bill Somerville
fb8b938ac7
Make FST4 std message generation consistent with other 77-bit modes 2020-08-04 11:43:19 +01:00
Joe Taylor
e32c5b699d Update Wide Graph and plotter.cpp for QRA66. 2020-08-01 13:37:31 -04:00
Joe Taylor
3867c452e6 Changes to GUI to accommodate QRA66. It's basically functional, I think. 2020-08-01 12:13:49 -04:00
Bill Somerville
92cf7b29c2
Merge branch 'develop' into feat-fst280 2020-07-31 15:00:50 +01:00
Bill Somerville
b05bfecb5f
Avoid arithmetic errors when parsing the round-robin current text 2020-07-31 12:39:08 +01:00
Bill Somerville
c2b835c42b
Translatable help windows 2020-07-29 18:44:34 +01:00
Joe Taylor
846b0b6ed8 Fix the problem "Tx did not start in the first Round-Robin sequence when it should have started". 2020-07-29 11:58:28 -04:00
Bill Somerville
0f3fc3d15c
Correct time on beacon mode Tx prints in decodes window 2020-07-27 19:51:56 +01:00
Bill Somerville
6cb72a5f3e
Remove duplicate ALL.TXT Tx report in beacon modes 2020-07-27 19:49:39 +01:00
Bill Somerville
3bf070938b
Enable Tx percentage spin box in WSPR and random FST4W modes 2020-07-27 19:48:13 +01:00
Bill Somerville
2bf8888725
Merge branch 'develop' into feat-fst280 2020-07-27 15:02:44 +01:00
Bill Somerville
080e21f6fc
Remove testing code 2020-07-27 15:01:09 +01:00
Joe Taylor
e96dee4c23 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-27 09:57:02 -04:00
Joe Taylor
236e334e71 *** TEMPORARY *** Allow transmitting FST4-15A and FST4-15B simultaneously. 2020-07-27 09:55:49 -04:00
Bill Somerville
c5248bf116
Merge branch 'develop' into feat-fst280 2020-07-27 13:25:28 +01:00
Bill Somerville
bb927a6115
Handle missing user_hardware on non-Windows systems 2020-07-27 13:13:04 +01:00
Bill Somerville
a2ad0be85b
Use shell to execute user_hardware via PATH 2020-07-27 12:19:47 +01:00
Bill Somerville
b4bbc44d5b
Invoke user_hardware correctly 2020-07-27 00:51:12 +01:00
Bill Somerville
5382ef4a33
Merge branch 'develop' into feat-wspr-user-hardware 2020-07-26 18:03:23 +01:00
Bill Somerville
7bb5a8e009
Merge branch 'develop' into feat-psk-reporter-re-work 2020-07-26 15:52:39 +01:00
Bill Somerville
9c22eb321d
Merge branch 'develop' into feat-fst280 2020-07-26 16:20:11 +01:00
Bill Somerville
2f700265b9
Merge branch 'develop' into feat-fst280 2020-07-26 10:20:55 +01:00
Bill Somerville
7566f3548d
Post FST4W spots to WSPRNet.org 
Includes a re-factoring  of the WSPRNet class,  particularly to handle
direct spot posts as well as via  a file from wsprd. Switched from GET
http request method to POST method.

FST4W spots  post the same information  a WSPR spots except  the drift
field is  always zero (FST4W  has no  drift compensation, so  no drift
figure is calculated by the decoder),  and the mode field reflects the
T/R  period in  minutes.  This  means  FST4W-120A will  be similar  to
WSPR-2, an FST4W-900  will be similar to WSPR-15. I  don't see any way
to  view the  mode field  on  either the  new or  old database  format
queries on WSPRnet,  so it is hard  to tell if that  field is actually
stored.
 2020-07-26 02:58:04 +01:00
Bill Somerville
63b1b0729a
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-26 02:54:04 +01:00
Joe Taylor
ceeafa5bed *** TEMPORARY *** Add a feature to transmit FT8 and FST4 at the same time. 2020-07-25 16:02:42 -04:00
Bill Somerville
4015c5e538
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-24 21:16:52 +01:00
Joe Taylor
5c4878a00a Display cursor position on Wide graph as a ToolTip. 2020-07-24 13:35:04 -04:00
Joe Taylor
dbaffea0cd Allow only TR periods >= 120 s for FST4W. 2020-07-24 11:13:48 -04:00
Bill Somerville
90c1824ffe
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-24 16:01:57 +01:00
Joe Taylor
c802c60afa Allow FST4 to use Split (Rig or Fake it). Set Tx upper freq limit for FST4W to 1600 Hz. 2020-07-24 10:58:10 -04:00
Bill Somerville
29fc0ced19
Revert "Fix double-clicking on a decode line containing fSpread." 
Change superseded.

This reverts commit d9c2a11821.
 2020-07-24 12:46:43 +01:00
Bill Somerville
580dd85a18
Remainder of renames to FST4 2020-07-23 18:51:05 +01:00
Joe Taylor
77a6f8f514 Move blanking from symspec() to fst240_decode(). Do not apply RefSpec corrections to data read from disk. 2020-07-23 10:58:10 -04:00
Bill Somerville
51f692d8d4
Avoid double Tx periods in WSPR modes when changing scheduling basis 2020-07-22 18:01:06 +01:00
Bill Somerville
ffd2ad4dc0
Narrower decodes display and move AP info into extra appended info 2020-07-22 01:05:14 +01:00
Joe Taylor
52643b01e2 Correct the "time to decode" and the "Tune" frequency for FST240 modes. 2020-07-21 14:56:20 -04:00
Joe Taylor
05a1b3bae8 Remove "Also FST240W" from the Decode menu and elswhere in the GUI. 2020-07-21 14:18:55 -04:00
Joe Taylor
52984a507a Move the WSPR frequency range indicator (green line) up 3 pixels. 2020-07-21 14:11:11 -04:00
Bill Somerville
5111dcdfa8
Include sub-mode in .WAV file meta-data for FST240 modes 2020-07-21 14:57:44 +01:00
Bill Somerville
0f6d054276
Narrow decode prints in the Band Activity window 2020-07-21 00:29:22 +01:00
Bill Somerville
09996d4d64
Leave decodes titles intact when changing settings in FST240* modes 2020-07-20 19:33:46 +01:00
Joe Taylor
2e916f995c Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-20 13:59:12 -04:00
Bill Somerville
06b9746619
Make fSpread printing compatible with QSOs 2020-07-20 18:27:29 +01:00
Bill Somerville
0c15ed36e9
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-20 17:12:36 +01:00
Joe Taylor
d9c2a11821 Fix double-clicking on a decode line containing fSpread. 2020-07-20 11:48:09 -04:00
Joe Taylor
9702537614 Add Round-Robin options for cycles of 4, 5, and 6 sequences. 2020-07-20 11:29:58 -04:00
Joe Taylor
07e06de8f3 Increase gain of the yellow "Linear average" plot. 2020-07-20 11:23:30 -04:00
Joe Taylor
b427a92137 Increase max value of Navg spinner on WideGraph. 2020-07-20 11:16:37 -04:00
Bill Somerville
22f66795a1
Improved C/Fortran string interoperation, and fix azel.dat updates 
The azel.dat file is no  longer written with future Doppler correction
information designed  for rigs  that can't do  CAT QSY  commands while
transmitting.
 2020-07-20 15:15:55 +01:00
Bill Somerville
731dfc5c6f
Qt 5.15 compatibility 2020-07-19 21:09:52 +01:00
Joe Taylor
6a4f1fbdf7 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-19 13:21:45 -04:00
Joe Taylor
159b8a97f7 Better handling of fSpread in mainwindow.cpp. Makes auto-seq work when plotspec is used. 2020-07-19 13:20:41 -04:00
Bill Somerville
58fc82e178
Correct standard message generation for FST240 2020-07-19 12:31:10 +01:00
Joe Taylor
7fa7b0dda9 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-18 13:57:08 -04:00