Joe Taylor
266d5dbe56
Correct another flaw in sync64.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7352 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-02 18:27:16 +00:00
Joe Taylor
b25aef4957
Increase upper DT limit for QRA64 to 6.5 s. Increase jstep to 200 (about 0.058 of a symbol).
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7351 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-02 15:24:07 +00:00
Joe Taylor
61e4e48e88
Correct the logic in badmsg.f90. Fix QRA64 decoding for very high SNR; also
...
for wide submodes when Doppler spread is low. Further improvements are
still possible!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7350 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-02 14:23:37 +00:00
Steven Franke
62ea15192a
Fix a minor typo.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7349 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-30 00:40:50 +00:00
Joe Taylor
7299a023ed
Set max TxDelay to 0.5 s.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7348 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-29 19:24:17 +00:00
Joe Taylor
cfede5e9db
Comment out the qra64_fastfading_channel function -- used only for tests.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7347 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-29 15:39:15 +00:00
Joe Taylor
7600269207
Allow "CQ nnn ..." messages to be posted to PSKreporter.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7346 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-29 15:24:50 +00:00
Joe Taylor
d972375792
Permit use of "CQ nnn" and AutoSeq in fast JT9 submodes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7345 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 19:34:52 +00:00
Joe Taylor
66cd1a191e
User Guide updates in preparation for pending release of v1.7.0-rc3.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7344 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 19:06:25 +00:00
Joe Taylor
8cf4fd2f8e
No longer any need for the checkbox labeled "Rx frequency offset with CQ nnn" on the Settings -> General tab.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7343 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 16:20:57 +00:00
Joe Taylor
f9a078dd8b
Revert to displaying Nico's return code with QRA64 messages. Suppress a few false decodes that cannot be correct messages.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7342 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-28 15:11:00 +00:00
Joe Taylor
5da4ae6363
Set naptype properly; protect nap() index from out-of-range values.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7341 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 16:38:39 +00:00
Joe Taylor
4838d97370
New parameters for AP decoding in QRA64. Do not use this revision on the air!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7340 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 15:50:47 +00:00
Bill Somerville
840163ab97
Change the "CQ nnn ..." logic to specify the calling frequency...
...
... rather than the working frequency.
Users set their working frequency and specify a calling frequency as a
kHz offset into the current Rx MHz with the main window spin box.
Calling CQ on the specified calling frequency is enabled by checking
the associated option.
Also enhanced the auto sequencing to handle short code 73 messages
correctly.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7339 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 01:34:43 +00:00
Bill Somerville
c9fb8ab89f
Allow for ampersand characters in configuration names
...
Ampersand characters have special significance in action names, they
indicate the following character is an accelerator. This change allows
single ampersand characters but filters them out from the
MultiSettings::configuration_name_changed signal. Double ampersands
may be used to escape a single ampersand.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7338 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 01:34:35 +00:00
Joe Taylor
869d62aae1
Change the indicator from 7 to 6: max number of AP bits is 68.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7337 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-23 12:40:48 +00:00
Joe Taylor
0ae13699df
Allow double-clicking in JTAlert to start a QSO. Please test!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7336 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-23 00:42:23 +00:00
Joe Taylor
341f636232
More editing of User Guide.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7335 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-22 20:33:50 +00:00
Joe Taylor
15c30a628d
Change the qra64sim default frequency for single signals to 1000 Hz.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7334 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-22 19:24:01 +00:00
Joe Taylor
7feb7fa21d
Edit the user guide.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7333 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-22 17:59:12 +00:00
Joe Taylor
c03b837725
Updates to User Guide with a new QRA64C example.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7332 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-22 17:48:59 +00:00
Joe Taylor
05fdb9d3d0
Update the list of sample files.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7331 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-22 16:29:11 +00:00
Joe Taylor
8c22cd205c
Add a QRA64C sample file with the new sync pattern.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7330 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-22 16:13:34 +00:00
Joe Taylor
d53085b552
Correct a flaw that could cause Tx to start as a result of a decode with AutoSeq active.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7329 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-22 15:47:59 +00:00
Joe Taylor
5e90bd6d42
Finish writing a usable version of program qra64code.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7328 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-21 21:23:48 +00:00
Joe Taylor
120b2ea151
Remove diagnostic print.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7327 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-21 20:57:10 +00:00
Joe Taylor
b1e69292bf
Display sine-wave frequency for QRA64 "@nnnn" messages.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7326 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-21 20:30:11 +00:00
Joe Taylor
76e8f5ec85
In place of the qra64 return code as is, display a number that increases monotonically with the amount of a priori information used.
...
Here's the translation, as a lookup table. The displayed number is the tens
digit of the number of a priori bits.
rc APxx displayed
-------------------
0 0 0
1 27 2
2 42 4
3 29 2
4 44 4
5 57 5
6 29 2
7 44 4
8 72 7
9 55 5
10 70 7
11 70 7
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7325 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-21 16:51:11 +00:00
Joe Taylor
14d44f483b
Display "OOO" at end of Tx message in status bar. Correct the logic for regenerating standard messages when "Enable VHF features" is changed.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7324 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-21 15:46:17 +00:00
Joe Taylor
c8d7421ead
Don't allow CW ID to extend Tx stop time beyond normal sequence boundary.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7323 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-19 18:28:14 +00:00
Joe Taylor
189dd436dd
Update jt9 to include decoding of QRA64.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7322 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-16 18:25:03 +00:00
Joe Taylor
72dfe01bf3
Working on QRA64 sync, snr estimates, etc., for QRA64 decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7321 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-15 21:39:55 +00:00
Bill Somerville
d416a0f5b4
Reset rig if it is found to be inactive
...
One reason for inactivity is that a calibration adjustment has been
made.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7320 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 21:17:28 +00:00
Joe Taylor
d9e91a88ab
Tweak an output format in the QRA64 simulator.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7319 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 21:04:13 +00:00
Joe Taylor
5299e74bc2
Presently we do need the normrnd header.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7318 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 20:29:00 +00:00
Joe Taylor
5afe27e531
Comment out the fast-fading channel simulator, it's not needed in WSJT-X and causes grief for WinXP folks without rand_s.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7317 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 20:26:59 +00:00
Joe Taylor
4334bf2fc3
In QRA64 decoder, downsample by 1/2 rather than 1/3. Fix some things in sync64 and spec64.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7316 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 19:56:13 +00:00
Joe Taylor
b04f70c5e7
Correct error in setting nSubmode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7315 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 19:20:13 +00:00
Joe Taylor
c2df8d3e4a
For submodes QRA64D and E, generate one signal at 700 Hz.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7314 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 18:13:31 +00:00
Joe Taylor
496cd70f54
Clarify use of the "17%" (etc.) indicator for MSK144 decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7313 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 15:57:15 +00:00
Joe Taylor
2d3a96b009
Use ISO 8601 format for Date/Time in ALL.TXT.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7312 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 15:29:38 +00:00
Joe Taylor
8b7a7e795d
After double-click on CQ message, don't change audio Tx freq if VHF features enabled. Temporarily(?), list Rx, Tx, and Calling freqs in Status Bar.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7311 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 15:00:15 +00:00
Joe Taylor
6258dc8fbf
Add text of --help message to qra64example.txt.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7310 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-14 01:52:19 +00:00
Joe Taylor
fc485dbb9e
Update a User Guide image.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7309 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-13 21:05:43 +00:00
Joe Taylor
d7866a947f
Minor edit to User Guide.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7308 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-13 21:03:51 +00:00
Joe Taylor
94ee6ea8a1
Sorry, I did not intend to commit changes to these routines. Revert to 7305.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7307 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-13 20:36:27 +00:00
Joe Taylor
8e1378bce3
If Monitor was OFF at start of band_changed(), return it to OFF when this function returns.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7306 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-13 20:28:53 +00:00
Joe Taylor
9c19649b3d
Invert the sync-vector test for messages with "OOO" signal report.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7305 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-13 20:04:09 +00:00
Bill Somerville
aef64f59d5
Remove the 13 character limit on macro entry in settings
...
This was never strictly enforced as macros can be edited to any
length. Obviously only standard messages and free text messages less
than or equal to 13 characters can actually be sent in the slow modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7304 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-12 12:04:57 +00:00
Bill Somerville
424b841aae
Reduce the ISCAT decoder stack size requirement
...
This stops a crash on Linux that is hard to avoid without increasing
the default process stack size limit.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7303 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-08 23:41:32 +00:00