Joe Taylor
fdfb655b06
Option to select "Low sidelobes" or "Most sensitive" for waterfall spectra.
2019-02-25 15:04:05 -05:00
Joe Taylor
25bfa3798a
Transmit FT8 using a gaussian-filtered waveform.
2019-02-22 13:39:39 -05:00
Joe Taylor
aeddaeab9e
FT4 now transmits a waveform generated from Gaussian-filtered frequency changes.
2019-02-21 12:10:27 -05:00
Joe Taylor
57a20f838f
Remove the code that builds an ADIF file from FoxQSO.txt.
2019-02-21 10:24:58 -05:00
Joe Taylor
d5a1671210
FT4 decoding interval is now 288 ms. Saving of FT4 files is somewhat rationalized.
2019-02-21 10:08:18 -05:00
Joe Taylor
f1e7b0c30a
Add (temporary?) code for converting FoxQSO.txt to an ADIF log.
2019-02-20 10:43:30 -05:00
Joe Taylor
c2cb55a68a
Reduce FT4 chunk size fro 500 to 288 ms; suppress duplicate decodes from close to chunk ends.
2019-02-13 14:42:57 -05:00
Steve Franke
cbfcb76193
AP decoding basically works. Make data_dir setting work on the Mac.
2019-02-07 18:48:38 -06:00
Steve Franke
71cb6d9f50
Use 4 different Costas arrays to prevent false syncs as received frames move
...
through the analysis window.
Add a random 77-bit vector to each message so that tone transitions occur
even if the message contains a long string of 0 or 1 (like a CQ).
Add alternative sync calculation as an option (sync2), for testing.
Add basic framework for AP decoding.
2019-02-05 19:18:50 -06:00
Joe Taylor
22209030e2
Move files all_ft4.txt and clockit.out to the data_dir directory.
2019-02-01 11:56:08 -05:00
Joe Taylor
04f085bb24
Proper handling of multiple decodes from one call to ft4_decode.
2019-01-31 13:55:21 -05:00
Joe Taylor
a80b955fe7
Decode FT4 over the full frequency range displayed in waterfall.
2019-01-31 12:10:58 -05:00
Joe Taylor
a7ded94313
Saved FT4 files must be at least 5 s long; Shift+F6 now works for FT4 files.
2019-01-29 15:24:08 -05:00
Joe Taylor
e11acde9fb
Better handling of calls to ft4_decode(), depending on ring-buffer pointer.
2019-01-29 14:19:22 -05:00
Joe Taylor
3ab7c1edf6
Don't logQSO or transmit in response to a decode from disk.
2019-01-29 13:19:36 -05:00
Joe Taylor
65398bbffa
Fix the UTC display on waterfall, for FT4 mode.
2019-01-29 12:12:54 -05:00
Joe Taylor
6d6e2e8314
Don't try to transmit a blank FT4 message!
2019-01-29 11:49:11 -05:00
Joe Taylor
e98231d4c1
Correct the call to genft4(); fix the displayed time for data from disk.
2019-01-29 10:39:34 -05:00
Joe Taylor
7a9240c9ef
Basic saving of .wav files for FT4.
2019-01-28 15:58:14 -05:00
Joe Taylor
d5203e2da9
Code cleanup.
2019-01-28 14:20:32 -05:00
Joe Taylor
2e4035c8bb
Insert red line on waterfall to mark an FT4 transmission.
2019-01-28 13:50:23 -05:00
Joe Taylor
7da4fc63a6
Add freq markers for FT4 to Wide Graph. Tentative default FT4 freqs for 40m and 20m.
2019-01-28 11:07:52 -05:00
Joe Taylor
6e4f0f32ee
Remove FT2; implement basic functionality in FT4.
2019-01-28 10:19:46 -05:00
Joe Taylor
f6e3dbb8e9
Increase the FT2 Tx duration timer from 2200 to 2500 ms.
2019-01-25 16:52:38 -05:00
Joe Taylor
a0ddc1485e
Make the ProgressBar invisible in FT2 mode.
2019-01-24 17:29:03 -05:00
Joe Taylor
edf4af5307
Be sure to set start time of QSO.
2019-01-24 15:58:08 -05:00
Joe Taylor
a9100f0291
Log FT2 QSOs when they are finished.
2019-01-24 13:02:47 -05:00
Joe Taylor
e55a8baa25
Minor tweaks to FT2 auto-sequencing and writes to all.txt.
2019-01-24 12:38:02 -05:00
Joe Taylor
c8cdd05f34
Implement auto-sequencing for FT2.
2019-01-24 11:58:57 -05:00
Joe Taylor
3fa7c7b9a7
More work on integrating FT2 (will become FT4?) into WSJT-X. Not finished!
2019-01-23 16:53:03 -05:00
Joe Taylor
14db0d682b
Make double-clicking of decodes to work in FT2 mode.
2019-01-23 10:51:26 -05:00
Joe Taylor
50c1daf61f
Use a timer to establish length of an FT2 (to be FT4?) transmission.
2019-01-23 10:09:18 -05:00
Joe Taylor
568fc0810e
Tx now works, more or less, in FT2 mode. Needs testing!
2019-01-18 16:22:25 -05:00
Joe Taylor
5f03d97a9e
Implement basic Rx capability for FT2 in WSJT-X.
2019-01-18 11:51:15 -05:00
Bill Somerville
5137b47c0a
Switch off nag window for develop
2019-01-16 20:44:04 +00:00
Bill Somerville
0932ddaba1
Merge branch 'hotfix-2.0.1-rc1' into develop
2019-01-16 20:33:59 +00:00
Bill Somerville
b3d6871786
Minor changes to support Qt versions >=10
2019-01-14 19:47:08 +00:00
Joe Taylor
d8a5d84647
Disable the startup message about upgrading to v2.0.
2019-01-09 09:05:21 -05:00
Joe Taylor
b3a8930eef
Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1
2019-01-09 08:48:22 -05:00
Joe Taylor
e12eabb65f
Clear labAz on program startup.
2019-01-09 08:47:29 -05:00
Joe Taylor
5f38d30c75
Add "Erase WSPR hashtable" to the Filemenu.
2019-01-08 15:41:59 -05:00
Bill Somerville
e871860642
Option to always start new decode periods at the top of the Band Activity window
2019-01-08 18:03:43 +00:00
Joe Taylor
9226d0829f
Correct a flaw in validating contest exchange data when logging.
2019-01-08 08:40:40 -05:00
Joe Taylor
949c5deda5
Refactor code that writes to ALL.TXT and ALL_WSPR.TXT. Iincludes better formatting.
2019-01-03 12:15:48 -05:00
Bill Somerville
5b0f713cd4
Defer dwonloading LoTW users file until "Settings->Colors->Fetch" button pressed
...
This change also repairs a defect in showing potential LoTW users when
the "Settings->General->Show DXCC, grid, and worked before status"
option is not checked.
2019-01-01 16:19:01 +00:00
Joe Taylor
90617b29ab
Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1
2018-12-31 10:39:26 -05:00
Joe Taylor
9d0473f1e8
Include grid in Tx1 messages with <hisCall>, such as "<DF2018ARDF> K1JT FN20".
2018-12-31 10:37:36 -05:00
Bill Somerville
8c13df2bc6
Merge branch 'hotfix-2.0.1-rc1' of bitbucket.org:k1jt/wsjtx into hotfix-2.0.1-rc1
2018-12-30 12:36:52 +00:00
Bill Somerville
12299957d7
Add Fox log ADIF export to the Fox Log window log table contextual pop up menu
2018-12-30 12:35:41 +00:00
Joe Taylor
8379fa86eb
Optional key bindings for F1 through F5, especially for contest use.
2018-12-28 11:19:29 -05:00
