subroutine map65a(dd,ss,savg,newdat,nutc,fcenter,ntol,idphi,nfa,nfb, & mousedf,mousefqso,nagain,ndecdone,nfshift,ndphi,max_drift, & nfcal,nkeep,mcall3b,nsum,nsave,nxant,mycall,mygrid, & neme,ndepth,nstandalone,hiscall,hisgrid,nhsym,nfsample, & ndiskdat,nxpol,nmode) ! Processes timf2 data from Linrad to find and decode JT65 signals. use wideband_sync use timer_module, only: timer parameter (MAXMSG=1000) !Size of decoded message list parameter (NSMAX=60*96000) real dd(4,NSMAX) real*4 ss(4,322,NFFT),savg(4,NFFT) real tavg(-50:50) !Temp for finding local base level real base(4) !Local basel level at 4 pol'ns real sig(MAXMSG,30) !Parameters of detected signals real a(5) real*8 fcenter character*22 msg(MAXMSG) character*3 shmsg0(4) character mycall*12,hiscall*12,mygrid*6,hisgrid*6,cp*1,cm*1 integer indx(MAXMSG),nsiz(MAXMSG) logical done(MAXMSG) logical xpol,bq65,q65b_called logical candec(MAX_CANDIDATES) logical ldecoded character decoded*22,blank*22,cmode*2 real short(3,NFFT) !SNR dt ipol for potential shorthands real qphi(12) type(candidate) :: cand(MAX_CANDIDATES) common/c3com/ mcall3a common/testcom/ifreq common/early/nhsym1,nhsym2,ldecoded(32768) data blank/' '/,cm/'#'/ data shmsg0/'ATT','RO ','RRR','73 '/ data nfile/0/,nutc0/-999/,nid/0/,ip000/1/,ip001/1/,mousefqso0/-999/ save ! Clean start for Q65 at early decode if(nhsym.eq.nhsym1 .or. nagain.ne.0) ldecoded=.false. if(ndiskdat.eq.1) ldecoded=.false. nkhz_center=nint(1000.0*(fcenter-int(fcenter))) mfa=nfa-nkhz_center+48 mfb=nfb-nkhz_center+48 mode65=mod(nmode,10) if(mode65.eq.3) mode65=4 mode_q65=nmode/10 nts_jt65=2**(mode65-1) !JT65 tone separation factor nts_q65=2**(mode_q65-1) !Q65 tone separation factor xpol=(nxpol.ne.0) ! No second decode for JT65? if(nhsym.eq.nhsym2 .and. nagain.eq.0 .and.ndiskdat.eq.0) mode65=0 if(nagain.eq.0) then call timer('get_cand',0) call get_candidates(ss,savg,xpol,nhsym,mfa,mfb,nts_jt65,nts_q65,cand,ncand) call timer('get_cand',1) candec=.false. endif !### ! do k=1,ncand ! freq=cand(k)%f+nkhz_center-48.0-1.27046 ! ipk=cand(k)%indx ! write(*,3010) nutc,k,db(cand(k)%snr),freq,cand(k)%xdt, & ! cand(k)%ipol,cand(k)%iflip,ipk,ldecoded(ipk) !3010 format('=a',i5.4,i5,f8.2,f10.3,f8.2,2i3,i6,L4) ! enddo !### nwrite_q65=0 bq65=mode_q65.gt.0 mcall3a=mcall3b mousefqso0=mousefqso if(.not.xpol) ndphi=0 nsum=0 !### Should use AppDir! ### open(23,file='CALL3.TXT',status='unknown') df=96000.0/NFFT !df = 96000/NFFT = 2.930 Hz if(nfsample.eq.95238) df=95238.1/NFFT ftol=0.010 !Frequency tolerance (kHz) dphi=idphi/57.2957795 foffset=0.001*(1270 + nfcal) !Offset from sync tone, plus CAL fqso=mousefqso + foffset - 0.5*(nfa+nfb) + nfshift !fqso at baseband (khz) iloop=0 2 if(ndphi.eq.1) dphi=30*iloop/57.2957795 if(nutc.ne.nutc0) nfile=nfile+1 nutc0=nutc do nqd=1,0,-1 if(nqd.eq.1) then !Quick decode, at fQSO fa=1000.0*(fqso+0.001*mousedf) - ntol fb=1000.0*(fqso+0.001*mousedf) + ntol + 4*53.8330078 else !Wideband decode at all freqs fa=-1000*0.5*(nfb-nfa) + 1000*nfshift fb= 1000*0.5*(nfb-nfa) + 1000*nfshift endif ia=nint(fa/df) + 16385 ib=nint(fb/df) + 16385 ia=max(51,ia) ib=min(32768-51,ib) if(ndiskdat.eq.1 .and. mode65.eq.0) ib=ia km=0 nkm=1 nz=n/8 freq0=-999. sync10=-999. fshort0=-999. syncshort0=-999. ntry=0 short=0. !Zero the whole short array jpz=1 if(xpol) jpz=4 ! First steps for JT65 decoding do i=ia,ib !Search over freq range freq=0.001*(i-16385)*df ! Find the local base level for each polarization; update every 10 bins. if(mod(i-ia,10).eq.0) then do jp=1,jpz do ii=-50,50 iii=i+ii if(iii.ge.1 .and. iii.le.32768) then tavg(ii)=savg(jp,iii) else write(13,*) 'Error in iii:',iii,ia,ib,fa,fb flush(13) go to 900 endif enddo call pctile(tavg,101,50,base(jp)) enddo endif ! Find max signal at this frequency smax=0. do jp=1,jpz if(savg(jp,i)/base(jp).gt.smax) then smax=savg(jp,i)/base(jp) jpmax=jp endif enddo if(smax.gt.1.1 .or. ia.eq.ib) then ! Look for JT65 sync patterns and shorthand square-wave patterns. call timer('ccf65 ',0) ssmax=1.e30 call ccf65(ss(1,1,i),nhsym,ssmax,sync1,ipol,jpz,dt, & flipk,syncshort,snr2,ipol2,dt2) if(dt.lt.-2.6 .or. dt.gt.2.5) sync1=-99.0 !### call timer('ccf65 ',1) if(mode65.eq.0) syncshort=-99.0 !If "No JT65", don't waste time ! ########################### Search for Shorthand Messages ################# ! Is there a shorthand tone above threshold? thresh0=1.0 ! Use lower thresh0 at fQSO if(nqd.eq.1 .and. ntol.le.100) thresh0=0. if(syncshort.gt.thresh0) then ! ### Do shorthand AFC here (or maybe after finding a pair?) ### short(1,i)=syncshort short(2,i)=dt2 short(3,i)=ipol2 ! Check to see if lower tone of shorthand pair was found. do j=2,4 i0=i-nint(j*mode65*10.0*(11025.0/4096.0)/df) ! Should this be i0 +/- 1, or just i0? ! Should we also insist that difference in DT be either 1.5 or -1.5 s? if(short(1,i0).gt.thresh0) then fshort=0.001*(i0-16385)*df noffset=0 if(nqd.eq.1) noffset=nint(1000.0*(fshort-fqso)-mousedf) if(abs(noffset).le.ntol) then ! Keep only the best candidate within ftol. !### NB: sync2 was not defined here! ! sync2=syncshort !### try this ??? if(fshort-fshort0.le.ftol .and. & syncshort.gt.syncshort0 .and. nkm.eq.2) km=km-1 if(fshort-fshort0.gt.ftol .or. & syncshort.gt.syncshort0) then if(km.lt.MAXMSG) km=km+1 sig(km,1)=nfile sig(km,2)=nutc sig(km,3)=fshort + 0.5*(nfa+nfb) sig(km,4)=syncshort sig(km,5)=dt2 sig(km,6)=45*(ipol2-1)/57.2957795 sig(km,7)=0 sig(km,8)=snr2 sig(km,9)=0 sig(km,10)=0 ! sig(km,11)=rms0 sig(km,12)=savg(ipol2,i) sig(km,13)=0 sig(km,14)=0 sig(km,15)=0 sig(km,16)=0 ! sig(km,17)=0 sig(km,18)=0 msg(km)=shmsg0(j) fshort0=fshort syncshort0=syncshort nkm=2 endif endif endif enddo endif ! ########################### Search for Normal Messages ########### ! Is sync1 above threshold? thresh1=1.0 ! Use lower thresh1 at fQSO if(nqd.eq.1 .and. ntol.le.100) thresh1=0. noffset=0 if(nqd.ge.1) noffset=nint(1000.0*(freq-fqso)-mousedf) if(newdat.eq.1 .and. sync1.gt.-99.0) then sync1=thresh1+1.0 noffset=0 endif if(sync1.gt.thresh1 .and. abs(noffset).le.ntol) then ! Keep only the best candidate within ftol. ! (Am I deleting any good decodes by doing this?) if(freq-freq0.le.ftol .and. sync1.gt.sync10 .and. & nkm.eq.1) km=km-1 if(freq-freq0.gt.ftol .or. sync1.gt.sync10) then nflip=nint(flipk) f00=(i-1)*df !Freq of detected sync tone (0-96000 Hz) ntry=ntry+1 if((nqd.eq.1 .and. ntry.ge.40) .or. & (nqd.eq.0 .and. ntry.ge.400)) then ! Too many calls to decode1a! write(*,*) '! Signal too strong, or suspect data? Decoding aborted.' write(13,*) 'Signal too strong, or suspect data? Decoding aborted.' call flush(13) go to 900 endif call timer('decode1a',0) ifreq=i ikhz=nint(freq+0.5*(nfa+nfb)-foffset)-nfshift idf=nint(1000.0*(freq+0.5*(nfa+nfb)-foffset-(ikHz+nfshift))) call decode1a(dd,newdat,f00,nflip,mode65,nfsample, & xpol,mycall,hiscall,hisgrid,neme,ndepth,nqd,dphi, & ndphi,nutc,ikHz,idf,ipol,ntol,sync2, & a,dt,pol,nkv,nhist,nsum,nsave,qual,decoded) call timer('decode1a',1) ! The case sync1=2.0 is just to make sure decode1a is called and bigfft done. if(mode65.ne.0 .and. sync1.ne.2.000000) then if(km.lt.MAXMSG) km=km+1 sig(km,1)=nfile sig(km,2)=nutc sig(km,3)=freq + 0.5*(nfa+nfb) sig(km,4)=sync1 sig(km,5)=dt sig(km,6)=pol sig(km,7)=flipk sig(km,8)=sync2 sig(km,9)=nkv sig(km,10)=qual ! sig(km,11)=idphi sig(km,12)=savg(ipol,i) sig(km,13)=a(1) sig(km,14)=a(2) sig(km,15)=a(3) sig(km,16)=a(4) ! sig(km,17)=a(5) sig(km,18)=nhist msg(km)=decoded freq0=freq sync10=sync1 nkm=1 endif endif endif endif enddo !i=ia,ib if(nqd.eq.1) then nwrite=0 if(mode65.eq.0) km=0 do k=1,km decoded=msg(k) if(decoded.ne.' ') then nutc=sig(k,2) freq=sig(k,3) sync1=sig(k,4) dt=sig(k,5) npol=nint(57.2957795*sig(k,6)) flip=sig(k,7) sync2=sig(k,8) nkv=sig(k,9) nqual=sig(k,10) ! idphi=nint(sig(k,11)) if(flip.lt.0.0) then do i=22,1,-1 if(decoded(i:i).ne.' ') go to 8 enddo stop 'Error in message format' 8 if(i.le.18) decoded(i+2:i+4)='OOO' endif nkHz=nint(freq-foffset)-nfshift mhz=fcenter ! ... +fadd ??? f0=mhz+0.001*nkHz ndf=nint(1000.0*(freq-foffset-(nkHz+nfshift))) nsync1=sync1 s2db=10.0*log10(sync2) - 40 !### empirical ### nsync2=nint(s2db) if(decoded(1:4).eq.'RO ' .or. decoded(1:4).eq.'RRR ' .or. & decoded(1:4).eq.'73 ') then nsync2=nint(1.33*s2db + 2.0) endif nwrite=nwrite+1 if(nxant.ne.0) then npol=npol-45 if(npol.lt.0) npol=npol+180 endif call txpol(xpol,decoded,mygrid,npol,nxant,ntxpol,cp) if(ndphi.eq.0) then write(*,1010) nkHz,ndf,npol,nutc,dt,nsync2, & cm,decoded,nkv,nqual,ntxpol,cp 1010 format('!',i3,i5,i4,i6.4,f5.1,i5,1x,a1,1x,a22,i2,i5,i5,1x,a1) else if(iloop.ge.1) qphi(iloop)=sig(k,10) write(*,1010) nkHz,ndf,npol,nutc,dt,nsync2, & cm,decoded,nkv,nqual,30*iloop write(27,1011) 30*iloop,nkHz,ndf,npol,nutc, & dt,sync2,nkv,nqual,cm,decoded 1011 format(i3,i4,i5,i4,i6.4,1x,f5.1,f7.1,i3,i5,a1,1x,a22) endif endif enddo ! k=1,km if(bq65) then q65b_called=.false. do icand=1,ncand if(cand(icand)%iflip.ne.0) cycle !Keep only Q65 candidates freq=cand(icand)%f+nkhz_center-48.0-1.27046 nhzdiff=nint(1000.0*(freq-mousefqso)-mousedf) - nfcal ! Now looking for "quick decode" (nqd=1) candidates at cursor freq +/- ntol. if(nqd.eq.1 .and. abs(nhzdiff).gt.ntol) cycle ikhz=mousefqso q65b_called=.true. f0=cand(icand)%f call timer('q65b ',0) call q65b(nutc,nqd,nxant,fcenter,nfcal,nfsample,ikhz,mousedf, & ntol,xpol,mycall,mygrid, hiscall,hisgrid,mode_q65,f0,fqso, & newdat,nagain,max_drift,nhsym,idec) call timer('q65b ',1) if(idec.ge.0) candec(icand)=.true. enddo if(.not.q65b_called) then freq=mousefqso + 0.001*mousedf ikhz=mousefqso f0=freq - (nkhz_center-48.0-1.27046) !### ??? ### call timer('q65b ',0) call q65b(nutc,nqd,nxant,fcenter,nfcal,nfsample,ikhz,mousedf, & ntol,xpol,mycall,mygrid,hiscall,hisgrid,mode_q65,f0,fqso, & newdat,nagain,max_drift,nhsym,idec) call timer('q65b ',1) endif endif if(nwrite.eq.0 .and. nwrite_q65.eq.0) then write(*,1012) mousefqso,nutc 1012 format('!',i3,9x,i6.4,' ') endif endif !nqd.eq.1 if(ndphi.eq.1 .and.iloop.lt.12) then iloop=iloop+1 go to 2 endif if(ndphi.eq.1 .and.iloop.eq.12) call getdphi(qphi) if(nqd.eq.1) then call sec0(1,tdec) write(*,1013) nsum,nsave,nstandalone,nhsym,tdec 1013 format('',3i4,i6,f6.2) flush(6) open(16,file='tquick.dat',status='unknown',access='append') write(16,1016) nutc,tdec 1016 format(i4.4,f7.1) close(16) endif call sec0(1,tsec0) if(nhsym.eq.nhsym1 .and. tsec0.gt.3.0) go to 700 if(nqd.eq.1 .and. nagain.eq.1) go to 900 if(nqd.eq.0 .and. bq65) then ! Do the wideband Q65 decode do icand=1,ncand if(cand(icand)%iflip.ne.0) cycle !Do only Q65 candidates here if(candec(icand)) cycle !Skip if already decoded freq=cand(icand)%f+nkhz_center-48.0-1.27046 ! If here at nqd=1, do only candidates at mousefqso +/- ntol if(nqd.eq.1 .and. abs(freq-mousefqso).gt.0.001*ntol) cycle ikhz=nint(freq) f0=cand(icand)%f call timer('q65b ',0) call q65b(nutc,nqd,nxant,fcenter,nfcal,nfsample,ikhz,mousedf,ntol, & xpol,mycall,mygrid,hiscall,hisgrid,mode_q65,f0,fqso,newdat, & nagain,max_drift,nhsym,idec) call timer('q65b ',1) if(idec.ge.0) candec(icand)=.true. enddo ! icand endif call sec0(1,tsec0) enddo ! nqd ! Trim the list and produce a sorted index and sizes of groups. ! (Should trimlist remove all but best SNR for given UTC and message content?) 700 call trimlist(sig,km,ftol,indx,nsiz,nz) done(1:km)=.false. j=0 ilatest=-1 do n=1,nz ifile0=0 do m=1,nsiz(n) i=indx(j+m) ifile=sig(i,1) if(ifile.gt.ifile0 .and.msg(i).ne.blank) then ilatest=i ifile0=ifile endif enddo i=ilatest if(i.ge.1) then if(.not.done(i)) then done(i)=.true. nutc=sig(i,2) freq=sig(i,3) sync1=sig(i,4) dt=sig(i,5) npol=nint(57.2957795*sig(i,6)) flip=sig(i,7) sync2=sig(i,8) nkv=sig(i,9) nqual=min(sig(i,10),10.0) ! rms0=sig(i,11) do k=1,5 a(k)=sig(i,12+k) enddo nhist=sig(i,18) decoded=msg(i) if(flip.lt.0.0) then do i=22,1,-1 if(decoded(i:i).ne.' ') go to 10 enddo stop 'Error in message format' 10 if(i.le.18) decoded(i+2:i+4)='OOO' endif mhz=fcenter !... +fadd ??? nkHz=nint(freq-foffset)-nfshift f0=mhz+0.001*nkHz ndf=nint(1000.0*(freq-foffset-(nkHz+nfshift))) ndf0=nint(a(1)) ndf1=nint(a(2)) ndf2=nint(a(3)) nsync1=sync1 s2db=10.0*log10(sync2) - 40 !### empirical ### nsync2=nint(s2db) if(decoded(1:4).eq.'RO ' .or. decoded(1:4).eq.'RRR ' .or. & decoded(1:4).eq.'73 ') then nsync2=nint(1.33*s2db + 2.0) endif if(nxant.ne.0) then npol=npol-45 if(npol.lt.0) npol=npol+180 endif call txpol(xpol,decoded,mygrid,npol,nxant,ntxpol,cp) cmode='#A' if(mode65.eq.2) cmode='#B' if(mode65.eq.4) cmode='#C' write(26,1014) f0,ndf,ndf0,ndf1,ndf2,dt,npol,nsync1, & nsync2,nutc,decoded,cp,cmode 1014 format(f8.3,i5,3i3,f5.1,i4,i3,i4,i5.4,4x,a22,2x,a1,3x,a2) write(21,1100) f0,ndf,dt,npol,nsync2,nutc,decoded,cp, & cmode(1:1),cmode(2:2) 1100 format(f8.3,i5,f5.1,2i4,i5.4,2x,a22,2x,a1,3x,a1,1x,a1) endif endif j=j+nsiz(n) enddo !i=1,km write(26,1015) nutc 1015 format(37x,i6.4,' ') call flush(21) call flush(26) call display(nkeep,ftol) ndecdone=2 900 close(23) ndphi=0 mcall3b=mcall3a return end subroutine map65a