program jt9 ! Decoder for JT9. Can run stand-alone, reading data from *.wav files; ! or as the back end of wsjt-x, with data placed in a shared memory region. ! NB: For unknown reason, ***MUST*** be compiled by g95 with -O0 !!! character*80 arg,infile parameter (NMAX=1800*12000) !Total sample intervals per 30 minutes parameter (NDMAX=1800*1500) !Sample intervals at 1500 Hz rate parameter (NSMAX=22000) !Max length of saved spectra integer*4 ihdr(11) real*4 s(NSMAX) real*4 red(NSMAX) logical*1 lstrong(0:1023) integer*1 i1SoftSymbols(207) character*22 msg integer*2 id2 complex c0(NDMAX) common/jt9com/ss(184,NSMAX),savg(NSMAX),id2(NMAX),nutc,ndiskdat, & ntr,mousefqso,nagain,newdat,nfa,nfb,ntol,kin nargs=iargc() if(nargs.lt.1) then print*,'Usage: jt9 TRperiod file1 [file2 ...]' print*,' Reads data from *.wav files.' print*,'' print*,' jt9 -s' print*,' Gets data from shared memory region.' go to 999 endif call getarg(1,arg) if(arg(1:2).eq.'-s') go to 999 read(arg,*) ntrperiod ifile1=2 nfa=1000 nfb=2000 ntol=500 nfqso=1500 newdat=1 nb=0 nbslider=100 do ifile=ifile1,nargs call getarg(ifile,infile) open(10,file=infile,access='stream',status='old',err=998) read(10) ihdr i1=index(infile,'.wav') read(infile(i1-4:i1-1),*,err=1) nutc0 go to 2 1 nutc0=0 2 nsps=0 if(ntrperiod.eq.1) nsps=6912 if(ntrperiod.eq.2) nsps=15360 if(ntrperiod.eq.5) nsps=40960 if(ntrperiod.eq.10) nsps=82944 if(ntrperiod.eq.30) nsps=252000 if(nsps.eq.0) stop 'Error: bad TRprtiod' kstep=nsps/2 tstep=kstep/12000.0 k=0 nhsym0=-999 npts=(60*ntrperiod-6)*12000 ! do i=1,npts ! id2(i)=100.0*sin(6.283185307*1046.875*i/12000.0) ! enddo do iblk=1,npts/kstep k=iblk*kstep read(10,end=10) id2(k-kstep+1:k) nhsym=(k-2048)/kstep if(nhsym.ge.1 .and. nhsym.ne.nhsym0) then ! Emit signal readyForFFT call symspec(k,ntrperiod,nsps,nb,nbslider,pxdb, & s,red,df3,ihsym,nzap,slimit,lstrong,c0,npts8) nhsym0=nhsym if(ihsym.ge.184) go to 10 endif enddo 10 close(10) iz=1000.0/df3 ! print*,'A',ihsym,nhsym,tstep,df3,ntol,nfqso ! Now do the decoding nutc=nutc0 ! Get sync, approx freq call sync9(ss,tstep,df3,ntol,nfqso,sync,fpk,red) ! print*,'B',sync,fpk,npts8,nsps call spec9(c0,npts8,nsps,fpk,xdt,i1SoftSymbols) call decode9(i1SoftSymbols,msg) write(*,1010) nutc,sync,xdt,1000.0+fpk,msg 1010 format(i4.4,3f7.1,2x,a22) enddo go to 999 998 print*,'Cannot open file:' print*,infile 999 end program jt9