program q65sim ! Generate simulated Q65 data for testing the decoder. use wavhdr use packjt parameter (NMAX=300*12000) !Total samples in .wav file type(hdr) h !Header for .wav file integer*2 iwave(NMAX) !Generated waveform integer itone(85) !Channel symbols (values 0-65) integer y(63) !Codeword real*4 xnoise(NMAX) !Generated random noise real*4 dat(NMAX) !Generated real data complex cdat(NMAX) !Generated complex waveform complex cspread(0:NMAX-1) !Complex amplitude for Rayleigh fading complex z real*8 f0,dt,twopi,phi,dphi,baud,fsample,freq character msg*37,fname*17,csubmode*1,arg*12 character msgsent*37 nargs=iargc() if(nargs.ne.10) then print*,'Usage: q65sim "msg" A-E freq fDop DT f1 Stp TRp Nfile SNR' print*,'Example: q65sim "K1ABC W9XYZ EN37" A 1500 0.0 0.0 0.0 1 60 1 -26' print*,' fDop = Doppler spread' print*,' f1 = Drift or Doppler rate (Hz/min)' print*,' Stp = Step size (Hz)' print*,' Stp = 0 implies no Doppler tracking' go to 999 endif call getarg(1,msg) call getarg(2,csubmode) mode65=2**(ichar(csubmode)-ichar('A')) call getarg(3,arg) read(arg,*) f0 call getarg(4,arg) read(arg,*) fspread call getarg(5,arg) read(arg,*) xdt call getarg(6,arg) read(arg,*) f1 call getarg(7,arg) read(arg,*) nstp call getarg(8,arg) read(arg,*) ntrperiod call getarg(9,arg) read(arg,*) nfiles call getarg(10,arg) read(arg,*) snrdb if(ntrperiod.eq.15) then nsps=1800 else if(ntrperiod.eq.30) then nsps=3600 else if(ntrperiod.eq.60) then nsps=7200 else if(ntrperiod.eq.120) then nsps=16000 else if(ntrperiod.eq.300) then nsps=41472 else print*,'Invalid TR period' go to 999 endif rms=100. fsample=12000.d0 !Sample rate (Hz) npts=fsample*ntrperiod !Total samples in .wav file nfft=npts nh=nfft/2 dt=1.d0/fsample !Sample interval (s) twopi=8.d0*atan(1.d0) nsym=85 !Number of channel symbols mode65=2**(ichar(csubmode) - ichar('A')) ichk=0 call genq65(msg,ichk,msgsent,itone,i3,n3) j=0 do i=1,85 if(itone(i).gt.0) then j=j+1 y(j)=itone(i)-1 endif enddo write(*,1001) y(1:13),y(1:13) 1001 format('Generated message'/'6-bit: ',13i3/'binary: ',13b6.6) write(*,1002) y 1002 format(/'Codeword:'/(20i3)) write(*,1003) itone 1003 format(/'Channel symbols:'/(20i3)) baud=12000.d0/nsps !Keying rate (6.67 baud fot 15-s sequences) h=default_header(12000,npts) write(*,1004) 1004 format('File TR Freq Mode S/N Dop DT f1 Stp Message'/70('-')) do ifile=1,nfiles !Loop over requested number of files if(ntrperiod.lt.60) then write(fname,1005) ifile !Output filename 1005 format('000000_',i6.6,'.wav') else write(fname,1106) ifile 1106 format('000000_',i4.4,'.wav') endif open(10,file=trim(fname),access='stream',status='unknown') xnoise=0. cdat=0. if(snrdb.lt.90) then do i=1,npts xnoise(i)=gran() !Generate gaussian noise enddo endif bandwidth_ratio=2500.0/6000.0 sig=sqrt(2*bandwidth_ratio)*10.0**(0.05*snrdb) if(snrdb.gt.90.0) sig=1.0 write(*,1020) ifile,ntrperiod,f0,csubmode,snrdb,fspread,xdt,f1,nstp,trim(msgsent) 1020 format(i4,i6,f7.1,2x,a1,2x,f5.1,f6.2,2f6.1,i4,2x,a) phi=0.d0 dphi=0.d0 k=(xdt+0.5)*12000 !Start audio at t=xdt+0.5 s (TR=15 and 30 s) if(ntrperiod.ge.60) k=(xdt+1.0)*12000 !TR 60+ at t = xdt + 1.0 s isym0=-99 do i=1,npts !Add this signal into cdat() isym=i/nsps + 1 if(isym.gt.nsym) exit if(isym.ne.isym0) then freq_drift=f1*i*dt/60.0 if(nstp.ne.0) freq_drift=freq_drift - nstp*nint(freq_drift/nstp) freq = f0 + freq_drift + itone(isym)*baud*mode65 dphi=twopi*freq*dt isym0=isym endif phi=phi + dphi if(phi.gt.twopi) phi=phi-twopi xphi=phi z=cmplx(cos(xphi),sin(xphi)) k=k+1 if(k.ge.1) cdat(k)=cdat(k) + sig*z enddo if(fspread.ne.0) then !Apply specified Doppler spread df=12000.0/nfft cspread(0)=1.0 cspread(nh)=0. b=6.0 !Use truncated Lorenzian shape for fspread do i=1,nh f=i*df x=b*f/fspread z=0. a=0. if(x.lt.3.0) then !Cutoff beyond x=3 a=sqrt(1.111/(1.0+x*x)-0.1) !Lorentzian amplitude phi1=twopi*rran() !Random phase z=a*cmplx(cos(phi1),sin(phi1)) endif cspread(i)=z z=0. if(x.lt.3.0) then !Same thing for negative freqs phi2=twopi*rran() z=a*cmplx(cos(phi2),sin(phi2)) endif cspread(nfft-i)=z enddo call four2a(cspread,nfft,1,1,1) !Transform to time domain sum=0. do i=0,nfft-1 p=real(cspread(i))**2 + aimag(cspread(i))**2 sum=sum+p enddo avep=sum/nfft fac=sqrt(1.0/avep) cspread=fac*cspread !Normalize to constant avg power cdat=cspread*cdat !Apply Rayleigh fading ! do i=0,nfft-1 ! p=real(cspread(i))**2 + aimag(cspread(i))**2 ! write(14,3010) i,p,cspread(i) !3010 format(i8,3f12.6) ! enddo endif dat=aimag(cdat) + xnoise !Add generated AWGN noise fac=32767.0 if(snrdb.ge.90.0) iwave(1:npts)=nint(fac*dat(1:npts)) if(snrdb.lt.90.0) iwave(1:npts)=nint(rms*dat(1:npts)) write(10) h,iwave(1:npts) !Save the .wav file close(10) enddo 999 end program q65sim