wsjtx-1.4.0-rc1 =============== Release candidate abandoned due to packaging issues on Linux. wsjtx-1.4.0-rc2 =============== Mac installer - g4wjs, Bob n7rjn - Cannot expand archive in RO DMG. Move tarball to Desktop or somewhere else before expanding. Hamlib TS-2000 - k1jt - WSJT-X "Mode" != "None" glitches when Tx QRG changes Trying to read "other" VFO mode requires FRn command to "other" VFO which is source of glitch when split. Current best workaround is to set "Mode" to "None" in Settings which stops WSJT-X trying to manipulate rig mode. Won't fix - Closed. Hamlib FT-847 - Eddy g6uqi - fails to start Hamlib FT-847 - Mark w7mem - fails to start Sent version with CAT trace - waiting log file. HamlibTranceiver::init_rig() not coping with no get VFO and no toggle VFO CAT command available, changed to just assume A/MAIN is always the Rx VFO on such rigs. Sent g6uqi a test version of RC3 with a fix for this. g6uqi reposts that this hot fix (r4449) has resolved the issue. Fixed wsjtx/wsjtx-1.4 (r4449) - Closed. Commander TS-2000 - Jim wb6dkh - SPLIT disappearing Commander TS-2000 - David wd4kpd - possibly the same issue VOX keying might be the factor. Sent logs to Dave aa6yq for comment. Further investigation now points to the auto-atu which swaps VFO and mode while tuning, this may be confusing Commander. Dave aa6yq confirms that WinWarbler will interact with Commander and cause this issue when the TS-2000 auto-ATU switches to CW during the tuning sequence. Passed info on to wb6dkh & wd4kpd. Not fixed for wd4kpd as he doesn't use WW. Sent tracing RC2 - awaiting log and match Commander ErrorLog.txt. Logs received from wd4kpd. Unexpected drop out of split reported by Commander when setting Tx frequency. Forwarded to aa6yq for analysis. Dave aa6yq reports that setting Tx frequency clears split on this rig (I guess many others too that use Kenwood style CAT commands). He suggests setting Tx frequency before setting split. This is slightly problematic because setting split has side effect of setting mode on Tx VFO and on Yaesu and Elecraft changing from CW to another mode applies a small frequency offset :( We may have to accept this as it will be rare and there is no explicit way of setting the mode of the Tx VFO in the Commander interface. The other workaround of doing everything twice (TxFreq, Split, TxFreq, Split) will glitch the Rx or Tx twice as much. Commander TS-2000 - Jim wb6dkh - Fake split Leaving wrong QRG (Tx) current. Need trace for this issue. Flex 6000 (TS-2000 emulation) - George kf2t - fails to read QRG Flex 6700 - Ed k0kc - No CAT no PTT Flex doesn't have FB; command. Sent kf2t test version that doesn't query TX QRG if not in split. Sent RC3 preview with a hotfix (r4434) to kf2t & k0kc. Caveats with SmartSDR & FlexRadio SDRs:- * Data mode cannot be set from WSJT-X, USB should be OK otherwise use "None" and set mode manually. * Split operation is not possible, this should not be an issue given that wide band Tx is available on these radios. Initial reports from kf2t indicate a successful fix. Hamlib FlexRadio (DTTSP UDP & IPC interfaces) - - Need to diagnose and check if these work Hamlib has a FlexRadio back end that talks UDP on 19001 or /dev/shm/SDRcommands . Windows (Finestra WM) - Josh kk1d - Application not staying inside virtual desktop Hamlib TS-570D - Peter Pauly ????? - Protocol error while getting TX frequency Hamlib? TS-570 - ??? n4au - Polling causing errors Split not required so r4434 may have resolved this anyway. Sent trace version of RC2 to Peter - awaiting log. Hamlib FT-450 - Rudy ve3bdr - Protocol error while getting mode of split VFO May be fixed by r4434. I have asked Rudy to try again with "Mode" set to "None". Not fixed. Sent trace version of RC2, awaiting log. LXDE desktop Ubuntu - Craig wb3gck - No application menu bar Suggested installing or un-installing appmenu-qt5 package. Hamlib IC-7100 - Erik on4pb - CAT PTT method not available on IC-7100 This has been identified as a HamlibTranceiver registration defect. PTT type categories incorrectly registered. Sent hot fix version of RC3 to on4pb for testing. Further problem reported with poll of PTT status failing. This appears to be a hamlib defect with ptt type being RIG_PTT_SERIAL_CAT instead of RIG_PTT_RIG. Asked for clarification on hamlib-devel ML. Hamlib IC-746 - Doc kb3mow - Wrong Tx QRG used after dbl-click on decode Asked for more details of exact Rx/Tx dial QRGs. Explanation appears to show Tx QRG out by 500Hz. I can't see any obvious way this can happen. kb3mow has reported that he can no longer reproduce this issue. On Hold. Hamlib ANAN-100D (PowerSDR mRX PS v3.2.19) - Ton pa0tbr - split mode not working Not urgent as split mode not required due to wide band Tx available. Sent hot fix version of v1.4 with mods for SmartSDR TS-2000 emulation. OmniRig TS-590S - Randy k5rhd - OmniRig server going offline Issues with clearing the error. Probably the "Test CAT" not always able to start OmniRig client cleanly issue. Sent a tracing version of RC2 - awaiting log. Hamlib R8500 - Chris (UK SWL) airguzzler@btinternet.com - Hamlib IO error Probably port mis-configuration. Awaiting update.