AbstractLogWindow &Delete ... 删除(&D) ... AbstractLogWindow::impl Confirm Delete 确认删除 Are you sure you want to delete the %n selected QSO(s) from the log? 是否确实要从日志中删除 %n 选定的通联数据? ActiveStations Message Averaging 信息平均值 <html><head/><body>Set maximum number of displayed lines.</body></html> <html><head/><body>设置显示的最多行数.</body></html> Max N 最多行数 <html><head/><body>Points logged during the past hour.</body></html> <html><head/><body>过去一小时内记录的点数.</body></html> 0 # Wanted only # 仅渴望 <html><head/><body>Set maximum elapsed number of T/R sequences.</body></html> <html><head/><body>设置T/R的最大运行次数.</body></html> Max Age 最长时间 Score: 分数: Rate: 比率: <html><head/><body>Total score accumulated since most recent reset of Cabrillo log.</body></html> <html><head/><body>自最近一次重置Cabrillo日志以来累积的总分.</body></html> <html><head/><body>Check this box to show only stations ready to be called.</body></html> <html><head/><body>勾选此框仅显示准备呼叫的电台.</body></html> Ready only 仅显示准备 Band Changes: 波段变更: <html><head/><body>Number of band changes during the past hour.</body></html> <html><head/><body>过去一小时内的波段变更次数.</body></html> <html><head/><body>Click on a line to call that station.</body></html> <html><head/><body>点击一条线呼叫该电台.</body></html> Active Stations 活动电台 Astro Doppler tracking 多普勒跟踪 <html><head/><body>One station does all Doppler shift correction, their QSO partner receives and transmits on the sked frequency.If the rig does not accept CAT QSY commands while transmitting a single correction is applied for the whole transmit period.</body></html> <html><head/><body>一个站执行所有多普勒换档校正, 他们的通联合作伙伴接收和传输 sked 频率.如果无线电设备在传输单个校正时不接受 CAT QSY 命令则在整个传输期间应用.</body></html> Full Doppler to DX Grid 全多普勒到 DX 网格 <html><head/><body>Transmit takes place on sked frequency and receive frequency is corrected for own echoes. This mode can be used for calling CQ, or when using Echo mode.</body></html> <html><head/><body>传输以 sked 频率进行, 接收频率被校正为自己的回波. 此模式可用于呼叫 CQ 或使用回波模式时.</body></html> Own Echo 自己的 Echo <html><head/><body>Both stations correct for Doppler shift such that they would be heard on the moon at the sked frequency.If the rig does not accept CAT QSY commands while transmitting a single correction is applied for the whole transmit period.Use this option also for Echo mode.</body></html> <html><head/><body>两个站都对多普勒移位进行校正, 这样它们就会在月球上以sked频率听到.如果无线电设备在传输单个校正时不接受 CAT QSY 命令, 则在整个传输期间应用.对于 Echo 模式也使用此选项.</body></html> Constant frequency on Moon 月球上的恒定频率 <html><head/><body>DX station announces their TX Freq, which is entered as the Sked Freq. Correction applied to RX and TX so you appear on the DX's station's own echo Freq.If the rig does not accept CAT QSY commands while transmitting a single correction is applied for the whole transmit period.</body></html> <html><head/><body>DX电台宣布其发射频率, 这是输入作为Sked频率修正应用于接收和发射, 所以你出现在DX电台自己的 Echo 频率.如果无线电设备在传输单个校正时不接受 CAT QSY 命令则在整个传输期间应用.</body></html> On DX Echo 在 DX Echo <html><head/><body>Tune radio manually and select this mode to put your echo on the same frequency.If the rig does not accept CAT QSY commands while transmitting a single correction is applied for the whole transmit period.</body></html> <html><head/><body>手动调谐无线电设备并选择此模式, 将 Echo 置于相同频率.如果无线电设备在传输单个校正时不接受 CAT QSY 命令则在整个传输期间应用.</body></html> Call DX 呼叫 DX <html><head/><body>No Doppler shift correction is applied. This may be used when the QSO partner does full Doppler correction to your grid square.</body></html> <html><head/><body>未应用多普勒换文件校正. 当通联合作伙伴对网格方进行完全多普勒校正时可能会使用.</body></html> None 无 Sked frequency Sked 频率 0 Rx: 接收: Tx: 发射: <html><head/><body>Press and hold the CTRL key to adjust the sked frequency manually with the rig's VFO dial or enter frequency directly into the band entry field on the main window.</body></html> <html><head/><body>按住 CTRL 键使用手动 sked 频率与无线电设备 VFO 将频率直接拨入主窗口中的频段输入字段.</body></html> Echo Mode Echo 模式 Hz 赫兹 RIT Dither 抖动 Astro Data 天体数据 Astronomical Data 天文数据 Bands Band name 波段名称 Lower frequency limit 频率下限 Upper frequency limit 频率上限 Band 波段 Lower Limit 下限 Upper Limit 上限 CAboutDlg About WSJT-X 关于 WSJT-X OK 确定 CabrilloLog Freq(MHz) 频率(兆赫) Mode 模式 Date & Time(UTC) 日期和时间(UTC) Call 呼号 Sent 发出 Rcvd 接收 Band 波段 CabrilloLogWindow Contest Log 竞赛日志 <html><head/><body>Right-click here for available actions.</body></html> <html><head/><body>按右键此处查看可用操作.</body></html> Right-click here for available actions. 按右键此处查看可用操作. 0 QSOs CallsignDialog Callsign 呼号 ColorHighlighting K1ABC CQ in message CQ 在信息内 My Call in message 我呼号在信息内 Transmitted message 发射信息 New DXCC 新DXCC New Grid 新网格 New DXCC on Band 新DXCC 波段 New Call 新呼号 New Grid on Band 新网格波段 New Call on Band 新呼号波段 Uploads to LotW 上传至 LotW New Continent 新大洲 New Continent on Band 新大洲波段 New CQ Zone 新 CQ区 New CQ Zone on Band 新CQ区波段 New ITU Zone 新 ITU区 New ITU Zone on Band 新ITU区波段 Configuration::impl &Delete 删除(&D) &Insert ... 插入(&I) ... Failed to create save directory 无法创建保存目录 path: "%1% 目录: "%1% Failed to create samples directory 无法创建示例目录 path: "%1" 目录: "%1" API key OK API密匙确认 API key read-only API密匙唯读 API key invalid API密匙无效 &Load ... 加载(&L) ... &Save as ... 另存为(&S) ... &Merge ... 合并(&M) ... &Reset 重置(&R) Serial Port: 串行端口: Serial port used for CAT control 用于CAT控制的串行端口 Network Server: 网络服务器: Optional hostname and port of network service. Leave blank for a sensible default on this machine. Formats: hostname:port IPv4-address:port [IPv6-address]:port 可选主机名和网络服务端口. 为无线电设备合理默认值保留空白. 格式: 主机名:端口 IP v4-地址:端口 [IPv6-地址]:端口 USB Device: USB 设备: Optional device identification. Leave blank for a sensible default for the rig. Format: [VID[:PID[:VENDOR[:PRODUCT]]]] 可选的设备标识. 为无线电设备合理默认值保留空白. 格式: [VID[:PID[:供应商[:产品]]]] Invalid audio input device 无效的音频输入设备 Invalid audio output device 无效的音频输出设备 Invalid PTT method 无效的PTT方法 Invalid PTT port 无效的PTT端口 Invalid Contest Exchange 无效的竞赛交换数据 You must input a valid ARRL Field Day exchange 您必须输入有效的 ARRL Field Day交换数据 You must input a valid ARRL RTTY Roundup exchange 您必须输入有效的 ARRL RTTY Roundup 交换数据 Pending DNS lookup, please try again later 等待域名系统查找, 请稍后再试 Reset Decode Highlighting 重置解码突出显示 Reset all decode highlighting and priorities to default values 将所有解码突出显示和优先级重置为默认值 Error Loading CTY.DAT 载入 CTY.DAT 错误 Error Loading CALL3.TXT file 载入 CALL3.TXT 错误 WSJT-X Decoded Text Font Chooser WSJT-X 解码文本字体选择 Hamlib update only available on Windows. Hamlib更新仅在Windows上可用. Error Loading libhamlib-4.dll 载入 libhamlib-4.dll 错误 Hamlib Update successful New Hamlib will be used after restart Hamlib更新成功重新启动后将使用新的Hamlib Hamlib successfully reverted Reverted Hamlib will be used after restart Hamlib 成功还原重新启动后将使用还原的 Hamlib No Hamlib update found that could be reverted 找不到可以还原的Hamlib更新 Error in network address 网络IP错误 UDP server DNS lookup failed UDP服务器域名系统查找失败 MAC-ambiguous multicast groups addresses not supported 不支持MAC不明确的多播组地址 Load Working Frequencies 载入工作频率 Frequency files (*.qrg *.qrg.json);;All files (*.*) 频率文件 (*.qrg);;所有文件 (*.*) Replace Working Frequencies 替换工作频率 Are you sure you want to discard your current working frequencies and replace them with the loaded ones? 是否确实要放弃当前工作频率, 并将其替换为加载的频率? Merge Working Frequencies 合并工作频率 Error reading frequency file 读取频率文件错误 Not a valid frequencies file 不是有效的频率文件 Incorrect file magic 不正确的文件内容 Version is too new 版本太新 Contents corrupt 内容已损坏 Save Working Frequencies 保存工作频率 Only Save Selected Working Frequencies 仅保存选定的工作频率 Are you sure you want to save only the working frequencies that are currently selected? Click No to save all. 是否确实要仅保存当前选择的工作频率? 单击否可保存所有. Reset Working Frequencies 重置工作频率 Are you sure you want to discard your current working frequencies and replace them with default ones? 您确定要放弃您当前的工作频率并用默认值频率替换它们吗? Save Directory 保存目录 AzEl Directory AzEl 目录 Rig control error 无线电设备控制错误 Failed to open connection to rig 无法打开无线电设备的连接 Rig failure 无线电设备故障 Not found audio device missing 未找到音频设备 DXLabSuiteCommanderTransceiver Failed to connect to DX Lab Suite Commander 无法连接到DX Lab Suite Commander DX Lab Suite Commander didn't respond correctly reading frequency: DX Lab Suite Commander读取频率没有正确响应: DX Lab Suite Commander sent an unrecognised TX state: DX Lab Suite Commander 发送了一个无法识别的发送状态: DX Lab Suite Commander didn't respond correctly polling TX status: DX Lab Suite Commander 没有测试正确响应轮询发送状态: DX Lab Suite Commander rig did not respond to PTT: DX Lab Suite Commander 未响应无线电设备发送PTT: DX Lab Suite Commander didn't respond correctly polling frequency: DX Lab Suite Commander 没有正确响应轮询频率: DX Lab Suite Commander didn't respond correctly polling TX frequency: DX Lab Suite Commander 没有正确响应轮询发射频率: DX Lab Suite Commander sent an unrecognised split state: DX Lab Suite Commander 发送了一个无法识别的异频状态: DX Lab Suite Commander didn't respond correctly polling split status: DX Lab Suite Commander 没有正确响应轮询异频状态： DX Lab Suite Commander sent an unrecognised mode: " DX Lab Suite Commander 发送了一个无法识别的模式: " DX Lab Suite Commander didn't respond correctly polling mode: DX Lab Suite Commander 没有正确响应轮询模式: DX Lab Suite Commander send command failed DX Lab Suite Commander 发送命令失败 DX Lab Suite Commander send command failed "%1": %2 DX Lab Suite Commander 发送命令失败 "%1": %2 DX Lab Suite Commander send command "%1" read reply failed: %2 DX Lab Suite Commander 发送命令 "%1" 读取回复失败: %2 DX Lab Suite Commander retries exhausted sending command "%1" DX Lab Suite Commander 发送命令重试失败 "%1" DX Lab Suite Commander sent an unrecognized frequency DX Lab Suite Commander 发送了无法识别的频率 DecodeHighlightingListView &Foreground color ... 字体颜色(&F) ... Choose %1 Foreground Color 选择 %1 字体颜色 &Unset foreground color 清除字体颜色(&U) &Background color ... 底色(&B) ... Choose %1 Background Color 选择 %1 底色 U&nset background color 未设置背景颜色(&n) &Reset this item to defaults 将此项重置为默认值(&R) DecodeHighlightingModel CQ in message CQ 信息 My Call in message 我的信息 Transmitted message 发射信息 New DXCC 新DXCC New DXCC on Band 新DXCC 波段 New Grid 新网格 New Grid on Band 新网格波段 New Call 未曾通联过 New Call on Band 未曾通联过波段 New Continent 新大洲 New Continent on Band 新大洲波段 New CQ Zone 新 CQ 区 New CQ Zone on Band 新 CQ 区波段 New ITU Zone 新 ITU 区 New ITU Zone on Band 新 ITU 区波段 LoTW User LoTW用户 f/g unset 字体颜色未设置 b/g unset 背景颜色未设置 Highlight Type 突出显示类型 Designer &Delete 删除(&D) &Insert ... 插入(&I) ... Insert &after ... 插入之后(&a)... Import Palette 导入调色板 Palettes (*.pal) 调色板 (*.pal) Export Palette 导出调色板 Dialog Gray time: 灰线时间: Directory File 文件 Progress 进度 URL Error 网址错误 Invalid URL: "%1" 无效的网址: "%1" JSON Error JSON错误 Contents file syntax error %1 at character offset %2 内容文件语法错误 %1 字符偏移量 %2 Contents file top level must be a JSON array 文件内容顶层必须是JSON数组 File System Error 文件系统错误 Failed to open "%1" Error: %2 - %3 未能打开 "%1" 错误: %2 - %3 Contents entries must be a JSON array 输入内容必须是JSON数组 Contents entries must have a valid type 输入内容必须具有有效的类型 Contents entries must have a valid name 输入内容必须具有有效的名称 Contents entries must be JSON objects 输入内容必须是JSON对象 Contents directories must be relative and within "%1" 目录内容必须是相对的并且在 "%1" Network Error 网络错误 Authentication required 需要认证 DisplayText &Erase 擦除(&E) EchoGraph Echo Graph Echo 图 <html><head/><body>Compression factor for frequency scale</body></html> <html><head/><body>频率刻度的压缩系数</body></html> Bins/Pixel 点/像素 Gain 增益 <html><head/><body>Echo spectrum gain</body></html> <html><head/><body>Echo 频谱增益</body></html> Zero 零度 <html><head/><body>Echo spectrum zero</body></html> <html><head/><body>Echo 频谱零度</body></html> Baseline 基准线 <html><head/><body>Smoothing of echo spectrum</body></html> <html><head/><body>Echo 频谱平滑</body></html> Smooth 平滑 <html><head/><body>Number of echo transmissions averaged</body></html> <html><head/><body>平均 Echo 传输次数</body></html> N: 0 <html><head/><body>Click to cycle through a sequence of colors and line widths.</body></html> <html><head/><body>单击以循环显示一系列颜色和线条宽度.</body></html> Colors 颜色 EmulateSplitTransceiver Emulated split mode requires rig to be in simplex mode 模拟异频模式要求无线电设备处于单工模式 EqualizationToolsDialog::impl Equalization Tools 均衡工具 Phase 相位 Freq (Hz) 频率 (赫兹) Phase (Π) 相位 (Π) Delay (ms) 延迟 (ms) Measured 测量 Proposed 提出 Current 当前 Group Delay 组延迟 Amplitude 振幅 Relative Power (dB) 相对功率 (分贝) Reference 参考 Phase ... 相位 ... Refresh 刷新 Discard Measured 丢弃测量 ExistingNameDialog Configuration to Clone From 从克隆中的配置 &Source Configuration Name: 源配置名称(&S): ExportCabrillo Dialog 对话框 Location: 位置: SNJ Contest: 竞赛: ARRL-RTTY Callsign: 呼号: Category-Operator: 类别-操作员: SINGLE-OP Category-Transmitter: 类别-发射机: ONE Category-Power: 类别-功率: LOW Category-Assisted: 类別-辅助: NON-ASSISTED Category-Band: 类别-波段: ALL Claimed-Score: 声称-得分: Operators: 操作员: Club: 俱乐部: Name: 姓名: Address: 地址: Save Log File 保存日志文件 Cabrillo Log (*.cbr) Cabrillo日志 (*.cbr) Cannot open "%1" for writing: %2 无法打开 "%1" 进行写入: %2 Export Cabrillo File Error 导出Cabrillo文件错误 FastGraph Fast Graph 快速图 Waterfall gain 瀑布增益 Waterfall zero 瀑布零度 Spectrum zero 频谱零度 <html><head/><body>Set reasonable levels for gain and zero sliders.</body></html> <html><head/><body>为增益和零滑块设置合理的水平.</body> </html> Auto Level 自动电平 FoxLog::impl Date & Time(UTC) 日期和时间(UTC) Call 呼号 Grid 网格 Sent 发送 Rcvd 接收 Band 波段 FoxLogWindow Fox Log 狐狸日志 <html><head/><body>Right-click here for available actions.</body></html> <html><head/><body>右键单击此处查看可用操作.</body></html> Callers: 呼叫者: N In progress: 正在进行中: Rate: 率: <html><head/><body>Last 10: Average rate (QSOs/hour) for the last 10 QSOs. Last 100: Average rate (QSOs/hour) for the last 100 QSOs. Last 60m: Average rate (QSOs/hour) for the last 60 minutes.</body></html> <html><head/><body>最后10个: 最后10个QSO的平均速率 (QSOs/小时). 最后100个: 最后100个QSO的平均速率 (QSOs/小时). 最后60分钟: 最后60分钟的平均速率 (QSOs/小时).</body></html> &Export ADIF ... 导出 ADIF(&E) ... Export ADIF Log File 导出 ADIF 日志文件 ADIF Log (*.adi) ADIF 日志 (*.adi) Export ADIF File Error 导出 ADIF 日志文件错误 Cannot open "%1" for writing: %2 无法打开 "%1" 以进行写入: %2 &Reset ... 重置(&R) ... Confirm Reset 确认重置 Are you sure you want to erase file FoxQSO.txt and start a new Fox log? 是否确实要擦除 FoxQSO.txt 文件并启动新的狐狸日志? FrequencyDialog Add Frequency 添加频率 IARU &Region: IA&RU 区域: &Mode: 模式(&M): &Frequency (MHz): 频率 (M&Hz): &Preferred for Band/Mode: 首选波段/模式(&P): &Description: 描述(&D): &Enable Date Range: 启用日期范围(&E): S&tart: 开始(&t): &End: 结束(&E): &Source: 来源(&S): Invalid Date Range 无效的日期范围 Start date must be before end date 开始日期必须在结束日期之前 FrequencyList_v2_101 IARU Region IARU 区域 Mode 模式 Frequency 频率 Frequency (MHz) 频率 (兆赫) Description 描述 Source 来源 Start Time 开始时间 End Time 结束时间 Pref 优先 Start Date/Time 开始日期/时间 End Date/Time 结束日期/时间 Failed to parse JSON file 无法解析JSON文件 Information Missing 信息缺失 No Frequencies were found 找不到频率 Loaded Frequencies from %1 载入频率来自 %1 Entries Valid/Skipped %1 有效/跳过的条目 %1 HRDTransceiver Failed to connect to Ham Radio Deluxe 无法连接到 Ham Radio Deluxe Failed to open file "%1": %2. 无法打开文件 "%1": %2. Ham Radio Deluxe: no rig found Ham Radio Deluxe: 未找到无线电设备 Ham Radio Deluxe: rig doesn't support mode Ham Radio Deluxe: 无线电设备不支持模式 Ham Radio Deluxe: sent an unrecognised mode Ham Radio Deluxe: 发送了一个无法识别的模式 Ham Radio Deluxe: item not found in %1 dropdown list Ham Radio Deluxe: 在 %1 下拉列表中找不到项目 Ham Radio Deluxe: button not available Ham Radio Deluxe: 按钮不可用 Ham Radio Deluxe didn't respond as expected Ham Radio Deluxe 没有如预期的那样响应 Ham Radio Deluxe: rig has disappeared or changed Ham Radio Deluxe: 无线电设备已经消失或改变 Ham Radio Deluxe send command "%1" failed %2 Ham Radio Deluxe 发送命令 "%1" 失败 %2 Ham Radio Deluxe: failed to write command "%1" Ham Radio Deluxe: 无法写入命令 "%1" Ham Radio Deluxe sent an invalid reply to our command "%1" Ham Radio Deluxe 对我们的命令发出了无效的回复 "%1" Ham Radio Deluxe failed to reply to command "%1" %2 Ham Radio Deluxe 无法回复命令 "%1" %2 Ham Radio Deluxe retries exhausted sending command "%1" Ham Radio Deluxe 发送命令重试失败 "%1" Ham Radio Deluxe didn't respond to command "%1" as expected Ham Radio Deluxe 没有回应预期的命令 "%1" HamlibTransceiver Hamlib initialisation error Hamlib 初始化错误 Hamlib settings file error: %1 at character offset %2 Hamlib 设置文件错误: %1 字符偏移量 %2 Hamlib settings file error: top level must be a JSON object Hamlib 设置文件错误: 顶层必须是 JSON 对象 Hamlib settings file error: config must be a JSON object Hamlib 设置文件错误: 配置必须是JSON对象 Unsupported CAT type 不支持 CAT 类型 Hamlib error: %1 while %2 Hamlib 错误: %1 当 %2 opening connection to rig 打开连接无线电设备 getting current frequency 获取当前频率 getting current mode 获取当前模式 exchanging VFOs 在 VFOs 之间切换 getting other VFO frequency 获取其他 VFO 频率 getting other VFO mode 获取其他 VFO 模式 setting current VFO 设置当前 VFO getting frequency 获取频率 getting mode 获取模式 getting current VFO 获取当前 VFO getting current VFO frequency 获取当前 VFO 频率 setting frequency 设置频率 getting current VFO mode 获取当前 VFO 模式 setting current VFO mode 设置当前 VFO 模式 setting VFOB mode 设置 VFOB 模式 setting/unsetting split mode 设置/取消设置异频模式 setting split mode 设置异频模式 setting split TX frequency and mode 设置异频发射频率和模式 setting split TX frequency 设置异频发射频率 getting split TX VFO mode 获得异频发射 VFO 模式 setting split TX VFO mode 设置异频发射 VFO 模式 getting PTT state 获取PTT 状态 setting PTT on 设置PTT 开启 setting PTT off 设置PTT 关闭 setting a configuration item 设置配置项目 getting a configuration item 获取配置项目 IARURegions All 全部 Region 1 区域 1 Region 2 区域 2 Region 3 区域 3 IARU Region IARU 区域 LogQSO Click OK to confirm the following QSO: 单击确定确认以下通联: Call 呼号 Start 开始 dd/MM/yyyy HH:mm:ss End 结束 Mode 模式 Band 波段 Rpt Sent 发送报告 Rpt Rcvd 接收报告 Grid 网格 Name 姓名 Tx power 发射功率 Retain 保留 Comments 注释 <html><head/><body>Add comment to the comments list.</body></html> <html><head/><body>将评论添加到评论列表.</body></html> Add 增加 Operator 操作员 Exch sent 交换发送 Rcvd 接收 Prop Mode 传播模式 Sat Mode 卫星模式 RX Frequency 接收信息 Aircraft scatter 飞机反射 Aurora-E 极光-E Aurora 极光 Back scatter 背面反射 Echolink Earth-moon-earth 月球面反射通信 Sporadic E 零星 E F2 Reflection F2 反射 Field aligned irregularities 场对齐不规则性 Internet-assisted 互联网辅助 Ionoscatter 电离层反射 IRLP 互联网电台连接 Meteor scatter 流星反射 Non-satellite repeater or transponder 非卫星中继器或转发器 Rain scatter 雨水反射 Satellite 卫星 Trans-equatorial 跨赤道 Troposheric ducting 对流层管道 A B BS JA JD K KA KT L LS LU LX S SX T US UV VS VU Invalid QSO Data 无效的通联数据 Check exchange sent and received 选择已交换的发送和接收 Check all fields 检查所有字段 Log file error 日志文件错误 Cannot open "%1" for append 无法打开 "%1" 的追加 Error: %1 错误: %1 MainWindow WSJT-X by K1JT Band Activity 波段活动 UTC dB DT Freq Dr Rx Frequency 接收信息 160 80 60 40 30 20 17 15 12 10 6 70 CQ messages only. 仅CQ信息. CQ only 仅显示CQ Bypass Filters toggled via Settings or the View menu. 通过设置或查看菜单切换的绕过过滤. BP 绕过 Enter this QSO in log 在日志中输入此通联记录 Log &QSO 记录通联(&Q) Stop monitoring 停止监听 &Stop 停止(&S) Toggle monitoring On/Off 切换监听启用/停用 &Monitor 监听(&M) <html><head/><body> 01:23:45 </body></html> Tol 容差 <html><head/><body>No own call decodes.</body></html> <html><head/><body>解码中没有自己的呼号.</body></html> <html><head/><body>Toggle FT8 hound mode On/Off. Right-click to toggle last used contest mode On/Off.</body></html> <html><head/><body>启用/停用 FT8猎犬模式. 右键单击可启用/停用上次使用的竞赛模式.</body></html> Switch to WSPR mode 切换到WSPR模式 Switch to FT8 mode. Right-click to toggle SuperFox mode On/Off. 切换到FT8模式. 右键单击以打开/关闭超级狐狸模式. Switch to FST4 mode 切换到FST4模式 <html><head/><body>Erase right window. Double-click to erase both windows.</body></html> <html><head/><body>擦除接收信息窗口. 双击可擦除波段活动窗口和接收信息窗口.</body></html> Erase right window. Double-click to erase both windows. 擦除右窗口. 双击可擦除两个窗口. &Erase 擦除(&E) <html><head/><body>Clear the accumulating message average.</body></html> <html><head/><body>清除累积信息平均值.</body></html> Clear the accumulating message average. 清除累积信息平均值. Clear Avg 清除平均 <html><head/><body>Decode most recent Rx period at QSO Frequency</body></html> <html><head/><body>在通联频率下解码最近的接收周期</body></html> Decode most recent Rx period at QSO Frequency 在通联频率下解码最近的接收周期 &Decode 解码(&D) <html><head/><body>Toggle Auto-Tx On/Off</body></html> <html><head/><body>切换启用/停用自动发射</body></html> Toggle Auto-Tx On/Off 切换启用/停用自动发射 E&nable Tx 启用发射(&n) Stop transmitting immediately 立即停止发射 &Halt Tx 停止发射(&H) Toggle a pure Tx tone On/Off 切换启用/停用发射纯音调 &Tune 调谐(&T) Menus 显示菜单 JT9+JT65 Write ALL.TXT 写入 ALL.TXT Copy main text window to WSJT-X.txt 将主文字视窗複製到 WSJT-X.txt Recommended audio settings 推荐的音频设置 <html><head/><body>Recommended Audio Settings.</body></html> <html><head/><body>推荐的音频设置.</body></html> FT4 NS (NCCC Sprints) FT4 NS (NCCC 冲刺) SuperFox User Guide 超级狐狸用户指南 Hide stations worked before on band 隐藏在波段上曾经通联的呼号 Hide stations worked today or yesterday 隐藏今天或昨天曾经通联的呼号 Hide stations from Ignore List 从忽略列表中隐藏呼号 Ignore stations worked today or yesterday 忽略今天或昨天曾经通联的呼号 Ignore stations from Ignore List 从忽略列表中忽略呼号 Hide stations from Territory 1 隐藏区域中的电台1 Hide stations from Territory 2 隐藏区域中的电台2 Hide stations from Territory 3 隐藏区域中的电台3 Hide stations from Territory 4 隐藏区域中的电台4 Highlight callsigns worked today or yesterday 突出显示今天或昨天曾经通联的呼号 Highlight callsigns from Ignore List 从忽略列表中突出显示呼号 Enable auto response to the first decode from a new DXCC or new call on the current band. 启用对当前频带上新DXCC或新呼叫的第一个解码的自动响应. <html><head/><body>Switch to T/R 30 s and Submode B.</body></html> <html><head/><body>切换到 T/R 30 s 和 Submode C.</body></html> 30B <html><head/><body>Switch to T/R 60 s and Submode C.</body></html> <html><head/><body>切换到 T/R 60 s 和 Submode C.</body></html> 60C F High F 高 F Low F 低 3 2m FT8 2m 20m FT4 17m FT8 17m 10m FT8 10m 2m MSK144 17m FT4 30m FT8 30m 80m FT8 80m 4m FT8 4m 12m FT8 12m 160m FT8 160m 30m FT4 70cm FT8 70cm 60m FT8 60m 6m FT8 6m 40m FT4 15m FT8 15m 40m FT8 40m 20m FT8 20m Band Hopping 波段跳跃 1/2 Avg 平均 <html><head/><body>Toggle Wait & Call On/Off. Right-click to clear the DX Call box.</body></html> <html><head/><body>切换等待 & 呼叫启用/停用. 右键单击清除DX呼叫框.</body></html> 2/2 1/3 2/3 3/3 1/4 2/4 3/4 4/4 1/5 2/5 3/5 4/5 5/5 1/6 2/6 3/6 4/6 5/6 6/6 Percentage of minute sequences devoted to transmitting. 用于传输的分钟序列的百分比. Prefer Type 1 messages 首选类型 1 信息 <html><head/><body>Transmit during the next sequence.</body></html> <html><head/><body>在下一个序列中传送.</body></html> Toggle FT8 hound mode On/Off 切换 FT8 猎犬模式启用/停用 H 猎犬 Q65 Switch to MSK144 mode 切换到MSK144模式 MSK Switch to FT4 mode 切换到FT4模式 SWL Mode SWL模式 Hide lower panel controls to maximize deocde windows 隐藏下面板控件最大化解码窗口 Band Buttons 波段按钮 Reduce false decodes 减少错误解码 Don't split ALL.TXT 不分拆 ALL.TXT Split ALL.TXT yearly 分拆每年 ALL.TXT Split ALL.TXT monthly 分拆每月 ALL.TXT Disable writing of ALL.TXT 禁止写入 ALL.TXT USB dial frequency 上边带频率 14.078 000 <html><head/><body>30dB recommended when only noise present Green when good Red when clipping may occur Yellow when too low</body></html> <html><head/><body>当只存在噪音时建议30dB 绿色范围好 红色范围时可能发生削波 黄色范围时太低</body></html> Rx Signal 接收信号 30dB recommended when only noise present Green when good Red when clipping may occur Yellow when too low 当只存在噪音时建议30dB 绿色范围好红色范围时可能发生削波黄色范围时太低 DX Call DX 呼号 DX Grid DX 网格 Callsign of station to be worked 正在通联的电台呼号 &Lookup 查找(&L) Locator of station to be worked 通联中的电台定位 Az: 251 16553 km 角度: 251 16553 公里 Add 增加 <html><head/><body>If orange or red there has been a rig control failure, click to reset and read the dial frequency. S implies split mode.</body></html> <html><head/><body>如果橙色或红色出现表示无线电设备控制故障, 请单击以重置并读取频率. S 表示异频模式.</body></html> If orange or red there has been a rig control failure, click to reset and read the dial frequency. S implies split mode. 如果橙色或红色出现表示无线电设备控制故障, 请单击以重置并读取频率. S 表示异频模式. ? Adjust Tx audio level 调整发射音频电平 <html><head/><body>Select operating band or enter frequency in MHz or enter kHz increment followed by k.</body></html> <html><head/><body>选择工作频段或输入兆赫频率或输入千赫增量，然后输入 k.</body></html> Frequency entry 输入频率 Select operating band or enter frequency in MHz or enter kHz increment followed by k. 选择工作频段或输入兆赫频率或输入千赫增量, 然后输入 k. <html><head/><body>Check to keep Tx frequency fixed when double-clicking on decoded text.</body></html> <html><head/><body>双击解码文本时, 选择以保持发射频率固定.</body></html> Check to keep Tx frequency fixed when double-clicking on decoded text. 双击解码文本时, 选择以保持发射频率固定. Hold Tx Freq 保持发射频率 Audio Rx frequency 音频接收频率 Hz 赫兹 Rx 接收 Set Tx frequency to Rx Frequency 将发射频率设置为接收频率 ▲ Frequency tolerance (Hz) 频率容差 (赫兹) F Tol 容差 Set Rx frequency to Tx Frequency 将接收频率位置移往发射频率位置 ▼ <html><head/><body>Synchronizing threshold. Lower numbers accept weaker sync signals.</body></html> <html><head/><body>同步阈值. 较低的数字接受较弱的同步信号.</body></html> Synchronizing threshold. Lower numbers accept weaker sync signals. 同步阈值. 较低的数字接受较弱的同步信号. Sync 同步 <html><head/><body>Check to use short-format messages.</body></html> <html><head/><body>选择以使用短格式信息.</body></html> Check to use short-format messages. 选择以使用短格式信息. Sh <html><head/><body>Check to enable JT9 fast modes</body></html> <html><head/><body>选择以启用 JT9 快速模式</body></html> Check to enable JT9 fast modes 选择以启用 JT9 快速模式 Fast 快速 <html><head/><body>Check to enable automatic sequencing of Tx messages based on received messages.</body></html> <html><head/><body>选择以启用基于收到的信息自动排序发射信息.</body></html> Check to enable automatic sequencing of Tx messages based on received messages. 选择以启用基于收到的信息自动排序发射信息. Auto Seq 自动程序 Check to generate "@1250 (SEND MSGS)" in Tx6. 选择以生成 "@1250 (发送信息)" 在发射6. Tx6 发射6 Tx even/1st 发射偶数/第一 <html><head/><body>Frequency to call CQ on in kHz above the current MHz</body></html> <html><head/><body>呼叫 CQ 的频率以千赫高于当前的兆赫</body></html> Frequency to call CQ on in kHz above the current MHz 呼叫 CQ 的频率以千赫高于当前的兆赫 Tx CQ 发射 CQ <html><head/><body>Check this to call CQ on the "Tx CQ" frequency. Rx will be on the current frequency and the CQ message wiill include the current Rx frequency so callers know which frequency to reply on.Not available to nonstandard callsign holders.</body></html> <html><head/><body>选中此项, 以发射CQ呼叫. 接收将在当前频率上, CQ信息将显示在当前的接收信息窗口, 以便呼叫者知道回复的频率.不适用于非标准呼号持有者.</body></html> Check this to call CQ on the "Tx CQ" frequency. Rx will be on the current frequency and the CQ message wiill include the current Rx frequency so callers know which frequency to reply on. Not available to nonstandard callsign holders. 选中此项, 以发射CQ呼叫. 接收将在当前频率上, CQ信息将显示在当前的接收信息窗口, 以便呼叫者知道回复的频率. 不适用于非标准呼号持有者. Rx All Freqs 接收全部频率 <html><head/><body>Submode determines tone spacing; A is narrowest.</body></html> <html><head/><body>子模式确定音调间距离; A 最窄.</body></html> Submode determines tone spacing; A is narrowest. 子模式确定音调间距离; A 最窄. Submode 子模式 Fox 狐狸 <html><head/><body>Check to monitor Sh messages.</body></html> <html><head/><body>选择以监视速记信息.</body></html> Check to monitor Sh messages. 选择以监视速记信息. SWL Best S+P 最佳 S+P <html><head/><body>Check this to start recording calibration data. While measuring calibration correction is disabled. When not checked you can view the calibration results.</body></html> <html><head/><body>选中可开始记录校准数据. 当测量校准校正被禁用时. 未检查时您可以查看校准结果.</body></html> Check this to start recording calibration data. While measuring calibration correction is disabled. When not checked you can view the calibration results. 选中可开始记录校准数据. 当测量校准校正被禁用时. 未检查时您可以查看校准结果. Measure 测量 <html><head/><body>Select CQ: None to choose callers manually.Select CQ: First to respond automatically to the first decoded reply to your CQ. Select CQ: Max Dist to respond automatically to the reply yielding most points in the ARRL International Digital Contest, or in general to the most distant station, if its message has a valid grid.Select CQ: Max dB to respond automatically to the the strongest station's reply to your CQ. Select CQ: Min dB to respond automatically to the the weakest station's reply to your CQ. </body></html> <html><head/><body>选择CQ: None 手动选择呼叫者.选择 CQ: 第一 自动回复您的CQ的第一个解码回复. 选择 CQ: 最远 自动响应在ARRL International Digita竞赛中产生最多分数的回复, 或者一般来说, 自动响应最远的台, 如果其信息具有有效的网格.选择 CQ: Max dB 自动回复最强的台回复你的CQ. 选择 CQ: Min dB 自动回复最弱的台回复你的CQ. </body></html> <html><head/><body>Check to Tx in even-numbered minutes or sequences, starting at 0; uncheck for odd sequences. Right-click to freeze the state of the checkbox. Right-click either the FT8 or MSK button to unfreeze.</body></html> <html><head/><body>以偶数分钟或序列检查到Tx, 从0开始；取消选中奇数序列. 右键单击以冻结复选框的状态. 右键单击FT8或MSK按钮解冻.</body></html> <html><head/><body>Signal report: Signal-to-noise ratio in 2500 Hz reference bandwidth (dB).</body></html> <html><head/><body>信号报告: 参考2500赫兹带宽 (分贝) 中的信噪比.</body></html> Signal report: Signal-to-noise ratio in 2500 Hz reference bandwidth (dB). 信号报告: 参考2500赫兹带宽 (分贝) 中的信噪比. Report 报告 <html><head/><body>Tx/Rx or Frequency calibration sequence length</body></html> <html><head/><body>发射/接收或频率校准序列长度</body></html> Tx/Rx or Frequency calibration sequence length 发射/接收或频率校准序列长度 s 秒 T/R Audio Tx frequency 音频发射频率 Tx 发射 Tx# 发射# 1 Send this message in next Tx interval 在下一个发射间隔内发送此信息 Ctrl+2 <html><head/><body>Send this message in next Tx intervalDouble click to toggle the use of the Tx1 message to start a QSO with a station (not allowed for type 1 compound call holders)</body></html> <html><head/><body>在下一个发射间隔内发送此信息双击以切换使用发射 1 信息以启动和电台的通联 (不允许 1 型复合呼叫持有者)</body></html> Send this message in next Tx interval Double click to toggle the use of the Tx1 message to start a QSO with a station (not allowed for type 1 compound call holders) 在下一个发射间隔内发送此信息双击以切换使用发射 1 信息以启动和电台的通联 (不允许 1 型复合呼叫持有者) Ctrl+1 Switch to this Tx message NOW 立即切换到此发射信息 Tx &2 发射 &2 Alt+2 <html><head/><body>Switch to this Tx message NOWDouble click to toggle the use of the Tx1 message to start a QSO with a station (not allowed for type 1 compound call holders)</body></html> <html><head/><body>立即切换到此发射信息双击以切换使用发射 1 信息以启动和电台的通联 (不允许 1 型复合呼叫持有者)</body></html> Switch to this Tx message NOW Double click to toggle the use of the Tx1 message to start a QSO with a station (not allowed for type 1 compound call holders) 立即切换到此发射信息双击以切换使用发射 1 信息以启动和电台的通联 (不允许 1 型复合呼叫持有者) Tx &1 发射 &1 Alt+1 Ctrl+6 <html><head/><body>Send this message in next Tx intervalDouble-click to reset to the standard 73 message</body></html> <html><head/><body>在下一个发射间隔内发送此信息双击可重置为标准 73 信息</body></html> Send this message in next Tx interval Double-click to reset to the standard 73 message 在下一个发射间隔内发送此信息双击可重置为标准 73 信息 Ctrl+5 Ctrl+3 Tx &3 发射 &3 Alt+3 <html><head/><body>Send this message in next Tx intervalDouble-click to toggle between RRR and RR73 messages in Tx4 (not allowed for type 2 compound call holders)RR73 messages should only be used when you are reasonably confident that no message repetitions will be required</body></html> <html><head/><body>在下一个发射间隔内发送此信息双击可在发射4 中的 RRR 和 RR73 信息之间切换 (不允许类型 2 复合呼叫持有者)RR73 信息仅在您有理由相信不需要重复信息时才应使用</body></html> Send this message in next Tx interval Double-click to toggle between RRR and RR73 messages in Tx4 (not allowed for type 2 compound call holders) RR73 messages should only be used when you are reasonably confident that no message repetitions will be required 在下一个发射间隔内发送此信息双击可在发射4 中的 RRR 和 RR73 信息之间切换 (不允许类型 2 复合呼叫持有者) RR73 信息仅在您有理由相信不需要重复信息时才应使用 Ctrl+4 <html><head/><body>Switch to this Tx message NOWDouble-click to toggle between RRR and RR73 messages in Tx4 (not allowed for type2 compound call holders)RR73 messages should only be used when you are reasonably confident that no message repetitions will be required</body></html> <html><head/><body>立即切换到此发射信息双击可在发射 4 中的 RRR 和 RR73 信息之间切换 (不允许类型 2 复合呼叫持有者)RR73 信息仅在您有理由相信不需要重复信息时才应使用</body></html> Switch to this Tx message NOW Double-click to toggle between RRR and RR73 messages in Tx4 (not allowed for type2 compound call holders) RR73 messages should only be used when you are reasonably confident that no message repetitions will be required 立即切换到此发射信息双击可在发射 4 中的 RRR 和 RR73 信息之间切换 (不允许类型 2 复合呼叫持有者) RR73 信息仅在您有理由相信不需要重复信息时才应使用 Tx &4 发射 &4 Alt+4 Tx &5 发射 &5 Alt+5 Now 现在 Generate standard messages for minimal QSO 生成标准信息用于通联 Generate Std Msgs 生成标准信息 Tx &6 发射 &6 Alt+6 Enter a free text message (maximum 13 characters) or select a predefined macro from the dropdown list. Press ENTER to add the current text to the predefined list. The list can be maintained in Settings (F2). 输入自定义文本信息(最多13个字符) 或者从下拉列表中选择预定义的宏. 按回车键将当前文本添加到预定义的列表. 该列表可在设置(F2)中维护. Queue up the next Tx message 排队下一个发射信息 Next 下一个 2 Quick-Start Guide to FST4 and FST4W FST4和FST4W快速入门指南 FST4 FST4W CQ Grid 网格 Max dB 最大分贝 CQ AF CQ 非洲 <html><head/><body>Search for callsign in database. Right-click searches for callsign on QRZ.com.</body></html> <html><head/><body>在数据库中搜索呼号. 右键单击在 QRZ.com 上搜索呼号.</body></html> <html><head/><body>Put callsign on the Ignore List. Right-click searches for callsign on qrzcq.com.</body></html> <html><head/><body>将呼号列入忽略名单. 右键单击在 qrzcq.com 上搜索呼号.</body></html> Ignore 忽略 <html><head/><body>Toggle a pure Tx tone On/Off Right-click to tune rig</body></html> <html><head/><body>打开/关闭纯发射音调 右键单击以调整装备</body></html> Rx 接收 <html><head/><body>Enter a free text message.</body></html> <html><head/><body>输入自定义讯息.</body></html> Free Text 自定义信息 <html><head/><body>Transmit free text message at the next opportunity.</body></html> <html><head/><body>下次发送自定义信息.</body></html> Send msg 发送信息 <html><head/><body>Maximum number of concurrent streams for Fox transmissions.</body></html> <html><head/><body>狐狸传输的最大并发流数量.</body></html> <html><head/><body>Maximum number of callsigns to be displayed in the queue.</body></html> <html><head/><body>队列中显示的最大呼号数.</body></html> <html><head/><body>Include a CQ message along with other messages.</body></html> <html><head/><body>包括CQ信息以及其他信息.</body></html> <html><head/><body>Select a specific CQ message.</body></html> <html><head/><body>选择特定的CQ信息.</body></html> <html><head/><body>Toggle a pure Tx tone On/Off</body></html> <html><head/><body>打开/关闭纯发射音调</body></html> ` Search for callsign in database 在数据库中搜索呼号 Add callsign and locator to database 将呼号和网格定位添加到数据库 Pwr 功率 Decode other Hounds calling above 1000 Hz audio offset 解码高于1000赫兹音频偏移的其他猎犬呼叫 <html><head/><body>Select CQ: First to respond automatically to the first decoded reply to your CQ. Select CQ: Max Dist to respond automatically to the reply yielding most points in the ARRL International Digital Contest.Select CQ: None to choose callers manually.</body></html> <html><head/><body>选择CQ: 第一 自动回复您的CQ的第一个解码回复. 选择 CQ: 最远 自动响应在ARRL International Digita竞赛中产生最多分数的回复, 或者一般来说, 自动响应最远的台, 如果其信息具有有效的网格.选择 CQ: None手动选择呼叫者.</body></html> <html><head/><body>Check to Tx in even-numbered minutes or sequences, starting at 0; uncheck for odd sequences.</body></html> <html><head/><body>勾选偶数分钟发射或序列, 从0开始；取消选中奇数序列.</body></html> Check to Tx in even-numbered minutes or sequences, starting at 0; uncheck for odd sequences. 勾选偶数分钟发射或序列, 从0开始；取消选中奇数序列. Maximum drift rate in units of symbol rate per transmission. 最大偏移速率, 单位为每次传输的符号速率. <html><head/><body>Switch to this Tx message NOWDouble-click to reset to the standard 73 message</body></html> <html><head/><body>立即切换到此发射信息双击以重置为标准73信息</body></html> Switch to this Tx message NOW Double-click to reset to the standard 73 message 立即切换到此发射信息双击以重置为标准73信息 CQ AN CQ 南极洲 CQ AS CQ 亚洲 CQ EU CQ 欧洲 CQ NA CQ 北美洲 CQ OC CQ 大洋洲 CQ SA CQ 南美洲 CQ 0 CQ 1 CQ 2 CQ 3 CQ 4 CQ 5 CQ 6 CQ 7 CQ 8 CQ 9 <html><head/><body>Select a desired sort order for callsigns in the queue.</body></html> <html><head/><body>为队列中的呼号选择所需的排序顺序.</body></html> <html><head/><body>Set the maximum permitted SNR for callers to be included in the queue.</body></html> <html><head/><body>为要包括在队列中的呼叫者设置最大允许信噪比.</body></html> <html><head/><body>Clear all queues.</body></html> <html><head/><body>清除所有队列.</body></html> Reset 重置 N List N 列表 N Slots N 插槽 Random 随机 Call 呼号 S/N (dB) 信噪比(分贝) Distance 距离 More CQs 更多 CQ % Tx Pct 发射 Pct Band Hopping 切换波段 Choose bands and times of day for band-hopping. 选择波段在一天之中的时间进行切换波段. Schedule ... 时间流程 ... Upload decoded messages to WSPRnet.org. 将解码的信息上载到 WSPRnet.org. Upload spots 上传 spots <html><head/><body>6 digit locators cause 2 different messages to be sent, the second contains the full locator but only a hashed callsign, other stations must have decoded the first once before they can decode your call in the second. Check this option to only send 4 digit locators if it will avoid the two message protocol.</body></html> <html><head/><body>6 位定位器会导致发送 2 个不同的信息, 第二个包含完整定位器, 但只有哈希呼号. 其他电台必须解码第一个一次. 然后才能在第二个中解码您的呼叫. 如果此选项将避免两个信息协议. 则选中此选项仅发送 4 位定位器.</body></html> 6 digit locators cause 2 different messages to be sent, the second contains the full locator but only a hashed callsign, other stations must have decoded the first once before they can decode your call in the second. Check this option to only send 4 digit locators if it will avoid the two message protocol. 6 位定位器会导致发送 2 个不同的信息, 第二个包含完整定位器, 但只有哈希呼号. 其他电台必须解码第一个一次. 然后才能在第二个中解码您的呼叫. 如果此选项将避免两个信息协议. 则选中此选项仅发送 4 位定位器. No own call decodes 解码中没有自己的呼号 Tx Next 发射下一个信息 Set Tx power in dBm (dB above 1 mW) as part of your WSPR message. 将发射功率设置为 dBm （dB 高于 1 mW）作为 WSPR 信息的一部分. NB Max Drift 最大漂移率 12m FT4 15m FT4 10m FT4 In Progress 正在进行中 Queue 队列 <html><head/><body>Add callsign and locator to database. Right-click searches for callsign on hamqth.com.</body></html> <html><head/><body>将呼号和网格定位添加到数据库. 右击搜索 hamqth.com 上的呼号.</body></html> Pwr 功率 <html><head/><body>Switch to this Tx message NOWDouble-click to reset to the standard 73 messageRight-click to retain Tx5 free text</body></html> <html><head/><body>立即切换到此Tx信息双击以重置为标准的73信息右键单击保留Tx5自定义信息</body></html> Allow Dupes 允许重複 2m MSK <html><head/><body>Toggle band hopping On/Off. Band hopping occurs every other full minute. Changes to the checkboxes take effect immediately. Right-click to test the default audio device.</body></html> <html><head/><body>切换波段跳跃开/关. 波段跳跃每隔一整分钟发生一次. 对复选框的更改会立即生效. 右键单击测试默认音频设备.</body></html> 80m FT4 FT8 QRG6 FT8 QRG1 FT8 QRG2 FT8 QRG7 FT8 QRG8 in kHz. FT8 QRG5 FT8 QRG3 FT8 QRG4 FT8 QRG8 FT8 QRG7 in kHz. FT8 QRG6 in kHz. FT8 QRG5 in kHz. FT8 QRG4 in kHz. FT8 QRG3 in kHz. FT8 QRG2 in kHz. FT8 QRG1 in kHz. <html><head/><body>Switch to Q65 mode. Right-click to switch to Q65 Pileup mode.</body></html> <html><head/><body>切换到 Q65 模式. 右键单击切换到 Q65 Pileup 模式.</body></html> <html><head/><body>Switch to JT65 mode. Right-click to switch to JT9 mode.</body></html> <html><head/><body>切换到 JT65 模式. 右键单击切换到 JT9 模式.</body></html> File 文件 View 显示 Filters 过滤 Decode 解码 Save 保存 Help 帮助 Mode 模式 Configurations 配置 Tools 工具 Exit 关闭软件 About WSJT-X 关于 WSJT-X Waterfall 瀑布图 Open 打开文件 Ctrl+O Open next in directory 打开下一个文件 Decode remaining files in directory 打开余下文件 Shift+F6 Delete all *.wav && *.c2 files in SaveDir 删除所有在SaveDir目录内 *.wav && *.c2 None 不保存 Save all 保存所有文件 Remove saved files after 30 days 30天后删除保存的文件 Online User Guide 在线用户指南 Keyboard shortcuts 键盘快捷键 Special mouse commands 特殊鼠标动作 JT9 Save decoded 保存解码文件 Normal 正常 Deep 深度 Erase ALL.TXT 删除 ALL.TXT Erase wsjtx_log.adi 删除通联日志 wsjtx_log.adi Erase wsjtx.log 删除 wsjtx.log Erase Ignore List 删除忽略列表 Highlight callsigns worked before on band 突出显示在波段曾经通联的呼号 Full Duplex Mode 全双工模式 F7 Active Stations 活动电台 Quick-Start Guide to WSJT-X 2.7 and QMAP WSJT-X 2.7 和 QMAP 快速入门指南 Diagnostic mode 诊断模式 Default event logging 默认事件记录 Disable event logging 禁用事件记录 Use Dark Style 启用黑夜模式 WSJT-X_improved Home Page WSJT-X _改进版主页 The additional features of wsjt-x_improved WSJT-X _改进版的附加功能 <html><head/><body>Overview on the additional features of wsjt-x_improved.</body></html> <html><head/><body>概述 WSJT-X _改进版的附加功能.</body></html> <html><head/><body>Go to the wsjt-x_improved home page.</body></html> <html><head/><body>转到 WSJT-X _改进版主页.</body></html> Erase list of Q65 callers 清除Q65呼叫者列表 Hide stations from Europe 隐藏欧洲的电台 Hide stations from North America 隐藏北美洲的电台 Hide stations from South America 隐藏南美洲的电台 Hide stations from Asia 隐藏亚洲的电台 Hide stations from Africa 隐藏非洲的电台 Hide stations from Oceania 隐藏大洋洲的电台 Hide stations from Antarctica 隐藏南极洲的电台 JT65 <html><head/><body> 2015 Jun 17 01:23:45 </body></html> Astronomical data 天文数据 List of Type 1 prefixes and suffixes 类型 1 前缀和后缀的列表 Settings... 设置... Local User Guide 本地用户指南 Open log directory 打开日志文件目录 JT4 Message averaging 信息平均值 Enable averaging 平均值 Enable deep search 启用深度搜索 WSPR Echo Graph Echo 图 F8 Echo EME Echo mode EME Echo 模式 ISCAT Fast Graph 快速图 F9 &Download Samples ... 下载样本文件(&D) ... <html><head/><body>Download sample audio files demonstrating the various modes.</body></html> <html><head/><body>下载演示各种模式的示例音频文件.</body></html> MSK144 QRA64 Release Notes 版本发行说明 Enable AP for DX Call 启用 AP 为 DX 呼叫 FreqCal Measure reference spectrum 测量参考频谱 Measure phase response 测量相位响应 Erase reference spectrum 擦除参考频谱 Execute frequency calibration cycle 执行频率校准周期 Equalization tools ... 均衡工具 ... FT8 Enable AP 启用 AP Solve for calibration parameters 校准参数的解算 Copyright notice 版权声明 Shift+F1 Fox log 狐狸日志 FT8 DXpedition Mode User Guide FT8 远征模式用户指南 Reset Cabrillo log ... 重置Cabrillo日志 ... Color highlighting scheme 颜色突出显示设定 Export Cabrillo log ... 导出Cabrillo日志 ... Contest log 竞赛日志 Erase WSPR hashtable 擦除 WSPR 哈希表 FT4 Quick-Start Guide to Q65 Q65 快速入门指南 Auto Clear Avg after decode 解码后自动清除平均值 Quick-Start Guide to WSJT-X 2.5.0 and MAP65 3.0 WSJT-X 2.5.0和MAP65 3.0快速入门指南 Rig Control Error 无线电设备控制错误 Receiving 接收 Do you want to reconfigure the radio interface? 是否要重新配置无线电设备接口? Error Scanning ADIF Log 扫描 ADIF 日志错误 Error Loading LotW Users Data 加载 LotW 用户数据错误 Error Writing WAV File 写入 WAV 文件时错误 Enumerating audio devices 列举音频设备 Configurations... 配置文件... Message 信息 Error Killing jt9.exe Process 错误终止 jt9.exe 进程 KillByName return code: %1 按名称终止返回代码: %1 Error removing "%1" 删除时错误 "%1" Click OK to retry 单击确定重试 Improper mode 模式不正确 File Open Error 文件打开错误 Cannot open "%1" for append: %2 无法打开 "%1" 用于附加: %2 Error saving c2 file 保存 c2 文件错误 Error in Sound Input 声音输入错误 Error in Sound Output 声音输错误 Single-Period Decodes 单周期解码 Average Decodes 平均解码 Change Operator 改变操作员 New operator: 新操作员: Status File Error 状态文件错误 Cannot open "%1" for writing: %2 无法打开 "%1" 用于写入: %2 Decodes containing My Call 解码包含我的呼叫 Subprocess Error 子流程错误 Subprocess failed with exit code %1 子流程失败, 退出代码为 %1 Running: %1 %2 运行: %1 %2 Subprocess error 子进程错误 Reference spectrum saved 保存参考频谱 Runaway Tx watchdog 发射监管计时器 WD:%1m WD:%1分 It is very important to avoid audio harmonics and distorted audio signals. This is usually achieved by the following step-by-step approach: 1. Select 'Fake it' in the Settings/Radio menu as your 'Split mode'. If your rig does not support this, select 'Rig'. But really try to avoid 'None'! 2. Set the transmission power of your transceiver to maximum. 3. Set the Pwr slider to the minimum and click on the 'Tune' button. 4. Observe the actual transmission power of your rig as well as ALC. 5. Carefully increase the Pwr slider until you have reached the maximum transmit powe of your transceiver. 6. VERY IMPORTANT: Now reduce the Pwr slider until you reach approx. 90% of your max. Tx power. ALC should be close to zero. 7. This is the maximum audio level permitted with your setup. Always stay with the Pwr slider below this max. value. If possible, check your transmission from time to time with a webSDR to ensure the signal is clean and not distorted. 避免音频谐波和失真的音频信号非常重要. 通常通过以下逐步方法实现: 1.在 "电台设置" 中选择 "软件虚拟" 作为您的 "异频模式". 如果你的设置不支持此功能, 请选择 "设备". 但是真的尽量避免 "无"！ 2.将设备的发射功率设置为最大. 3.将功率滑块设置为最小值, 然后单击 "调谐" 按钮. 4.观察你的设备和ALC的实际传输功率. 5.小心地增加功率滑块, 直到达到你设备的最大发射功率. 6.非常重要: 现在减少功率滑块, 直到你达到大约. 最大值的90%. 发射功率. ALC应该接近于零. 7.这是您的设置允许的最大音量. 始终保持功率滑块低于此最大值. 如果可能的话, 不时用网络SDR检查你的传输以确保信号干净且不失真. Recommended Audio Settings 推荐的音频设置 Invalid data in fmt.all at line %1 在 %1 行中 fmt.all 的无效数据 Good Calibration Solution 良好的校准解决方案 <pre>%1%L2 ±%L3 ppm %4%L5 ±%L6 Hz %7%L8 %9%L10 Hz</pre> Delete Calibration Measurements 删除校准测量值 The "fmt.all" file will be renamed as "fmt.bak" "fmt.all" 文件将重命名为 "fmt.bak" No data read from disk. Wrong file format? 没有从磁盘读取数据. 文件格式出错误? Confirm Delete 确认删除 Are you sure you want to delete all *.wav and *.c2 files in "%1"? 是否确实要删除所有 *.wav 和 *.c2 文件在 "%1"? Keyboard Shortcuts 键盘快捷键 <table cellspacing=1> <tr><td>Esc </td><td>Stop Tx, abort QSO, clear next-call queue</td></tr> <tr><td>F1 </td><td>Online User's Guide (Alt: transmit Tx6)</td></tr> <tr><td>Shift+F1 </td><td>Copyright Notice</td></tr> <tr><td>Ctrl+F1 </td><td>About WSJT-X</td></tr> <tr><td>F2 </td><td>Open settings window (Alt: transmit Tx2)</td></tr> <tr><td>F3 </td><td>Display keyboard shortcuts (Alt: transmit Tx3)</td></tr> <tr><td>F4 </td><td>Clear DX Call, DX Grid, Tx messages 1-4 (Alt: transmit Tx4)</td></tr> <tr><td>Alt+F4 </td><td>Exit program</td></tr> <tr><td>F5 </td><td>Display special mouse commands (Alt: transmit Tx5)</td></tr> <tr><td>F6 </td><td>Open next file in directory (Alt: toggle "Call 1st")</td></tr> <tr><td>Shift+F6 </td><td>Decode all remaining files in directory</td></tr> <tr><td>F7 </td><td>Display Message Averaging window</td></tr> <tr><td>F11 </td><td>Move Rx frequency down 1 Hz</td></tr> <tr><td>Ctrl+F11 </td><td>Move identical Rx and Tx frequencies down 1 Hz</td></tr> <tr><td>Shift+F11 </td><td>Move Tx frequency down 60 Hz (FT8) or 90 Hz (FT4)</td></tr> <tr><td>Ctrl+Shift+F11 </td><td>Move dial frequency down 1000 Hz</td></tr> <tr><td>F12 </td><td>Move Rx frequency up 1 Hz</td></tr> <tr><td>Ctrl+F12 </td><td>Move identical Rx and Tx frequencies up 1 Hz</td></tr> <tr><td>Shift+F12 </td><td>Move Tx frequency up 60 Hz (FT8) or 90 Hz (FT4)</td></tr> <tr><td>Ctrl+Shift+F12 </td><td>Move dial frequency up 1000 Hz</td></tr> <tr><td>Alt+1-6 </td><td>Set now transmission to this number on Tab 1</td></tr> <tr><td>Ctl+1-6 </td><td>Set next transmission to this number on Tab 1</td></tr> <tr><td>Alt+A </td><td>Clear Active Stations for QMAP</td></tr> <tr><td>Alt+B </td><td>Toggle "Best S+P" status</td></tr> <tr><td>Alt+C </td><td>Toggle "Call 1st" checkbox</td></tr> <tr><td>Alt+D </td><td>Decode again at QSO frequency</td></tr> <tr><td>Shift+D </td><td>Full decode (both windows)</td></tr> <tr><td>Ctrl+E </td><td>Turn on TX even/1st</td></tr> <tr><td>Shift+E </td><td>Turn off TX even/1st</td></tr> <tr><td>Alt+E </td><td>Erase</td></tr> <tr><td>Ctrl+F </td><td>Edit the free text message box</td></tr> <tr><td>Alt+G </td><td>Generate standard messages</td></tr> <tr><td>Alt+H </td><td>Halt Tx</td></tr> <tr><td>Ctrl+L </td><td>Lookup callsign in database, generate standard messages</td></tr> <tr><td>Alt+M </td><td>Monitor</td></tr> <tr><td>Alt+N </td><td>Toggle "Enable Tx"</td></tr> <tr><td>Ctrl+O </td><td>Open a .wav file</td></tr> <tr><td>Alt+O </td><td>Change operator</td></tr> <tr><td>Alt+Q </td><td>Open "Log QSO" window</td></tr> <tr><td>Ctrl+R </td><td>Set Tx4 message to RRR (not in FT4)</td></tr> <tr><td>Alt+R </td><td>Set Tx4 message to RR73</td></tr> <tr><td>Ctrl+Shift+R </td><td>Refresh Active Stations window</td></tr> <tr><td>Alt+S </td><td>Stop monitoring</td></tr> <tr><td>Alt+T </td><td>Toggle Tune status</td></tr> <tr><td>Alt+Z </td><td>Clear hung decoder status</td></tr> </table> Keyboard shortcuts help window contents <table cellspacing=1> <tr><td>Esc </td><td>停止发送,中止通联,清除下一个呼叫序列</td></tr> <tr><td>F1 </td><td>线上用户指南 (Alt: 发送 Tx6)</td></tr> <tr><td>Shift+F1 </td><td>版权声明</td></tr> <tr><td>Ctrl+F1 </td><td>关于 WSJT-X</td></tr> <tr><td>F2 </td><td>开启设定视窗 (Alt: 发送 Tx2)</td></tr> <tr><td>F3 </td><td>显示键盘快速键 (Alt: 发送 Tx3)</td></tr> <tr><td>F4 </td><td>清除DX呼号, DX网格, 发送讯息 1-4 (Alt: 发送 Tx4)</td></tr> <tr><td>Alt+F4 </td><td>退出程序</td></tr> <tr><td>F5 </td><td>显示特殊滑鼠命令 (Alt: transmit Tx5)</td></tr> <tr><td>F6 </td><td>开启目录中下一个文件 (Alt: toggle "呼叫第 1")</td></tr> <tr><td>Shift+F6 </td><td>直接解码所有剩馀档</td></tr> <tr><td>F7 </td><td>显示讯息平均视窗</td></tr> <tr><td>F11 </td><td>将发送频率向下移动 1 赫兹</td></tr> <tr><td>Ctrl+F11 </td><td>移动相同的接收和发送频率向下移动 1 赫兹</td></tr> <tr><td>Shift+F11 </td><td>将发送频率向下移动 60 赫兹 (FT8) 或 90 赫兹 (FT4)</td></tr> <tr><td>Ctrl+Shift+F11 </td><td>将频率向下移动 2000 赫兹</td></tr> <tr><td>F12 </td><td>将接收频率向上移动 1 赫兹</td></tr> <tr><td>Ctrl+F12 </td><td>相同的接收和发送频率向上 1 赫兹</td></tr> <tr><td>Shift+F12 </td><td>将发送频率向上移动 60 赫兹(FT8) or 90 赫兹 (FT4)</td></tr> <tr><td>Ctrl+Shift+F12 </td><td>将频率调高 2000 赫兹</td></tr> <tr><td>Alt+1-6 </td><td>现在将传输设定为选项卡 1 上的此号码</td></tr> <tr><td>Ctl+1-6 </td><td>在选项卡 1 上将下一个传输设定为此号码</td></tr> <tr><td>Alt+A </td><td>清除QMAP的活動電台</td></tr> <tr><td>Alt+B </td><td>切换 "最佳 S+P" 状态</td></tr> <tr><td>Alt+C </td><td>切换 "呼叫 CQ 强制呼叫第 1" 複选框</td></tr> <tr><td>Alt+D </td><td>在通联频率再次解码</td></tr> <tr><td>Shift+D </td><td>全部解码(两个视窗)</td></tr> <tr><td>Ctrl+E </td><td>开启 TX even/1st</td></tr> <tr><td>Shift+E </td><td>关闭 TX even/1st</td></tr> <tr><td>Alt+E </td><td>清除</td></tr> <tr><td>Ctrl+F </td><td>编辑自订义文字资讯</td></tr> <tr><td>Alt+G </td><td>产生标准讯息</td></tr> <tr><td>Alt+H </td><td>停止发送</td></tr> <tr><td>Ctrl+L </td><td>在资料库中寻找呼号, 产生标准讯息</td></tr> <tr><td>Alt+M </td><td>监听</td></tr> <tr><td>Alt+N </td><td>切换 "启用发送"</td></tr> <tr><td>Ctrl+O </td><td>开启 .wav 档案</td></tr> <tr><td>Alt+O </td><td>更换操作员</td></tr> <tr><td>Alt+Q </td><td>开启 "记录通联"窗口</td></tr> <tr><td>Ctrl+R </td><td>将 Tx4 讯息设定为 RRR(不在 FT4 中)</td></tr> <tr><td>Alt+R </td><td>将 Tx4 消息设定为 RR73</td></tr> <tr><td>Ctrl+Shift+R </td><td>刷新活动电台窗口</td></tr> <tr><td>Alt+S </td><td>停止监听</td></tr> <tr><td>Alt+T </td><td>切换调谐状态</td></tr> <tr><td>Alt+Z </td><td>清除挂起解码器状态</td></tr> </table> <table cellspacing=1> <tr><td>Esc </td><td>Stop Tx, abort QSO, clear next-call queue</td></tr> <tr><td>F1 </td><td>Online User's Guide (Alt: transmit Tx6)</td></tr> <tr><td>Shift+F1 </td><td>Copyright Notice</td></tr> <tr><td>Ctrl+F1 </td><td>About WSJT-X</td></tr> <tr><td>F2 </td><td>Open settings window (Alt: transmit Tx2)</td></tr> <tr><td>F3 </td><td>Display keyboard shortcuts (Alt: transmit Tx3)</td></tr> <tr><td>F4 </td><td>Clear DX Call, DX Grid, Tx messages 1-4 (Alt: transmit Tx4)</td></tr> <tr><td>Alt+F4 </td><td>Exit program</td></tr> <tr><td>F5 </td><td>Display special mouse commands (Alt: transmit Tx5)</td></tr> <tr><td>F6 </td><td>Open next file in directory (Alt: toggle "Call 1st")</td></tr> <tr><td>Shift+F6 </td><td>Decode all remaining files in directory</td></tr> <tr><td>F7 </td><td>Display Message Averaging window</td></tr> <tr><td>F11 </td><td>Move Rx frequency down 1 Hz</td></tr> <tr><td>Ctrl+F11 </td><td>Move identical Rx and Tx frequencies down 1 Hz</td></tr> <tr><td>Shift+F11 </td><td>Move Tx frequency down 60 Hz (FT8) or 90 Hz (FT4)</td></tr> <tr><td>Ctrl+Shift+F11 </td><td>Move dial frequency down 1000 Hz</td></tr> <tr><td>F12 </td><td>Move Rx frequency up 1 Hz</td></tr> <tr><td>Ctrl+F12 </td><td>Move identical Rx and Tx frequencies up 1 Hz</td></tr> <tr><td>Shift+F12 </td><td>Move Tx frequency up 60 Hz (FT8) or 90 Hz (FT4)</td></tr> <tr><td>Ctrl+Shift+F12 </td><td>Move dial frequency up 1000 Hz</td></tr> <tr><td>Alt+1-6 </td><td>Set now transmission to this number on Tab 1</td></tr> <tr><td>Ctl+1-6 </td><td>Set next transmission to this number on Tab 1</td></tr> <tr><td>Alt+A </td><td>Clear Active Stations for QMAP</td></tr> <tr><td>Alt+B </td><td>Toggle "Best S+P" status</td></tr> <tr><td>Alt+C </td><td>Toggle "Call 1st" checkbox</td></tr> <tr><td>Alt+D </td><td>Decode again at QSO frequency</td></tr> <tr><td>Shift+D </td><td>Full decode (both windows)</td></tr> <tr><td>Ctrl+E </td><td>Turn on TX even/1st</td></tr> <tr><td>Shift+E </td><td>Turn off TX even/1st</td></tr> <tr><td>Alt+E </td><td>Erase</td></tr> <tr><td>Ctrl+F </td><td>Edit the free text message box</td></tr> <tr><td>Alt+G </td><td>Generate standard messages</td></tr> <tr><td>Alt+H </td><td>Halt Tx</td></tr> <tr><td>Ctrl+I </td><td>Add Dx Call to the Ignore List</td></tr> <tr><td>Ctrl+L </td><td>Lookup callsign in database, generate standard messages</td></tr> <tr><td>Alt+M </td><td>Monitor</td></tr> <tr><td>Alt+N </td><td>Toggle "Enable Tx"</td></tr> <tr><td>Ctrl+O </td><td>Open a .wav file</td></tr> <tr><td>Alt+O </td><td>Change operator</td></tr> <tr><td>Alt+Q </td><td>Open "Log QSO" window</td></tr> <tr><td>Ctrl+R </td><td>Set Tx4 message to RRR (not in FT4)</td></tr> <tr><td>Alt+R </td><td>Set Tx4 message to RR73</td></tr> <tr><td>Ctrl+Shift+R </td><td>Refresh Active Stations window</td></tr> <tr><td>Alt+S </td><td>Stop monitoring</td></tr> <tr><td>Alt+T </td><td>Toggle Tune status</td></tr> <tr><td>Alt+Z </td><td>Clear hung decoder status</td></tr> </table> Keyboard shortcuts help window contents <table cellspacing=1> <tr><td>Esc </td><td>停止发送,中止通联,清除下一个呼叫序列</td></tr> <tr><td>F1 </td><td>线上用户指南 (Alt: 发送 Tx6)</td></tr> <tr><td>Shift+F1 </td><td>版权声明</td></tr> <tr><td>Ctrl+F1 </td><td>关于 WSJT-X</td></tr> <tr><td>F2 </td><td>开启设定视窗 (Alt: 发送 Tx2)</td></tr> <tr><td>F3 </td><td>显示键盘快速键 (Alt: 发送 Tx3)</td></tr> <tr><td>F4 </td><td>清除DX呼号, DX网格, 发送讯息 1-4 (Alt: 发送 Tx4)</td></tr> <tr><td>Alt+F4 </td><td>退出程序</td></tr> <tr><td>F5 </td><td>显示特殊滑鼠命令 (Alt: transmit Tx5)</td></tr> <tr><td>F6 </td><td>开启目录中下一个文件 (Alt: toggle "呼叫第 1")</td></tr> <tr><td>Shift+F6 </td><td>直接解码所有剩馀档</td></tr> <tr><td>F7 </td><td>显示讯息平均视窗</td></tr> <tr><td>F11 </td><td>将发送频率向下移动 1 赫兹</td></tr> <tr><td>Ctrl+F11 </td><td>移动相同的接收和发送频率向下移动 1 赫兹</td></tr> <tr><td>Shift+F11 </td><td>将发送频率向下移动 60 赫兹 (FT8) 或 90 赫兹 (FT4)</td></tr> <tr><td>Ctrl+Shift+F11 </td><td>将频率向下移动 2000 赫兹</td></tr> <tr><td>F12 </td><td>将接收频率向上移动 1 赫兹</td></tr> <tr><td>Ctrl+F12 </td><td>相同的接收和发送频率向上 1 赫兹</td></tr> <tr><td>Shift+F12 </td><td>将发送频率向上移动 60 赫兹(FT8) or 90 赫兹 (FT4)</td></tr> <tr><td>Ctrl+Shift+F12 </td><td>将频率调高 2000 赫兹</td></tr> <tr><td>Alt+1-6 </td><td>现在将传输设定为选项卡 1 上的此号码</td></tr> <tr><td>Ctl+1-6 </td><td>在选项卡 1 上将下一个传输设定为此号码</td></tr> <tr><td>Alt+A </td><td>清除QMAP的活動電台</td></tr> <tr><td>Alt+B </td><td>切换 "最佳 S+P" 状态</td></tr> <tr><td>Alt+C </td><td>切换 "呼叫 CQ 强制呼叫第 1" 複选框</td></tr> <tr><td>Alt+D </td><td>在通联频率再次解码</td></tr> <tr><td>Shift+D </td><td>全部解码(两个视窗)</td></tr> <tr><td>Ctrl+E </td><td>开启 TX even/1st</td></tr> <tr><td>Shift+E </td><td>关闭 TX even/1st</td></tr> <tr><td>Alt+E </td><td>清除</td></tr> <tr><td>Ctrl+F </td><td>编辑自订义文字资讯</td></tr> <tr><td>Alt+G </td><td>产生标准讯息</td></tr> <tr><td>Alt+H </td><td>停止发送</td></tr> <tr><td>Ctrl+I </td><td>將Dx呼號添加到忽略列表</td></tr> <tr><td>Ctrl+L </td><td>在资料库中寻找呼号, 产生标准讯息</td></tr> <tr><td>Alt+M </td><td>监听</td></tr> <tr><td>Alt+N </td><td>切换 "启用发送"</td></tr> <tr><td>Ctrl+O </td><td>开启 .wav 档案</td></tr> <tr><td>Alt+O </td><td>更换操作员</td></tr> <tr><td>Alt+Q </td><td>开启 "记录通联"窗口</td></tr> <tr><td>Ctrl+R </td><td>将 Tx4 讯息设定为 RRR(不在 FT4 中)</td></tr> <tr><td>Alt+R </td><td>将 Tx4 消息设定为 RR73</td></tr> <tr><td>Ctrl+Shift+R </td><td>刷新活动电台窗口</td></tr> <tr><td>Alt+S</td><td>停止监听</td></tr> <tr><td>Alt+T</td><td>切换调谐状态</td></tr> <tr><td>Alt+Z</td><td>清除挂起解码器状态</td></tr> </table> Special Mouse Commands 特殊鼠标组合 No more files to open. 没有要打开的文件. Spotting to PSK Reporter unavailable 发送到 Pskreporter 不可用 Please choose another Tx frequency. WSJT-X will not knowingly transmit another mode in the WSPR sub-band on 30m. 请选择另一个发射频率. WSJT-X 不会故意在 30m 的 WSPR 子频段中传输另一种模式. WSPR Guard Band WSPR保护波段 Scanned ADIF log, %1 worked-before records created. CTY: %2 扫描 ADIF 日志, %1 创建曾经通联记录. CTY: %2 Please choose another dial frequency. Must be 3Khz away from %1. WSJT-X will not operate in Fox mode overlapping the standard FT8 sub-bands. 请选择另一个频率. 必须 3Khz 距离 %1. WSJT-X不会以狐狸模式工作重叠标准FT8子频带. Fox Mode warning 狐狸模式警告 Last Tx: %1 最后发射: %1 If you make fair use of any part of WSJT-X under terms of the GNU General Public License, you must display the following copyright notice prominently in your derivative work: "The algorithms, source code, look-and-feel of WSJT-X and related programs, and protocol specifications for the modes FSK441, FST4, FT8, JT4, JT6M, JT9, JT65, JTMS, QRA64, Q65, MSK144 are Copyright (C) 2001-2024 by one or more of the following authors: Joseph Taylor, K1JT; Bill Somerville, G4WJS; Steven Franke, K9AN; Nico Palermo, IV3NWV; Greg Beam, KI7MT; Michael Black, W9MDB; Edson Pereira, PY2SDR; Philip Karn, KA9Q; Uwe Risse, DG2YCB; Brian Moran, N9ADG; and other members of the WSJT Development Group." 如果您根据GNU通用公共许可证的条款合理使用WSJT-X的任何部分, 您必须在您的衍生作品中突出显示以下版权声明: "WSJT-X和相关程序的算法源代码外观和感觉, 以及模式的协议规范 FSK441, FST4, FT8, JT4, JT6M, JT9, JT65, JTMS, QRA64, Q65, MSK144 版权所有(C) 2001-2024是由以下一个或多个作者拥有的: Joseph Taylor, K1JT; Bill Somerville, G4WJS; Steven Franke, K9AN; Nico Palermo, IV3NWV; Greg Beam, KI7MT; Michael Black, W9MDB; Edson Pereira, PY2SDR; Philip Karn, KA9Q; Uwe Risse, DG2YCB; Brian Moran, N9ADG; 和WSJT发展小组的其他成员." <table cellpadding=5> <tr> <th align="right">Click on</th> <th align="left">Action</th> </tr> <tr> <td align="right">Waterfall:</td> <td>Click to set Rx frequency. Shift-click to set Tx frequency. Ctrl-click or Right-click to set Rx and Tx frequencies. Double-click to also decode at Rx frequency. </td> </tr> <tr> <td align="right">Decoded text:</td> <td>Double-click to copy second callsign to Dx Call, locator to Dx Grid, change Rx and Tx frequency to decoded signal's frequency, and generate standard messages. If Hold Tx Freq is checked or first callsign in message is your own call, Tx frequency is not changed unless Ctrl is held down. </td> </tr> <tr> <td align="right">Erase button:</td> <td>Click to erase QSO window. Double-click to erase QSO and Band Activity windows. </td> </tr> <tr> <td align="right">Q65 Button:</td> <td>Click to switch to Q65 Mode. Right-click to switch to Q65 Pileup Mode. </td> </tr> <tr> <td align="right">JT65 Button:</td> <td>Click to switch to JT65 Mode. Right-click to switch to JT9 Mode. </td> </tr> </table> Mouse commands help window contents <table cellpadding=5> <tr> <th align="right">点击</th> <th align="left">行动</th> </tr> <tr> <td align="right">瀑布图:</td> <td>Click 设定接收频率. Shift-click 设定发送频率. Ctrl-click or 右键单击 设定接收和发送频率. Double-click 在接收频率解码. </td> </tr> <tr> <td align="right">解码文字:</td> <td>Double-click 解码的文字将第二个呼号複製到 Dx 呼号, 定位器到 Dx 网格,将接收和发送频率更改为 解码信号的频率, 并生成 标準讯息. 如果 保持发送频率 已选中或在消息中显示第一个呼号 是你自己的呼叫, 发送频率不更改,除非 Ctrl 键被按下. </td> </tr> <tr> <td align="right">清除按钮:</td> <td>点击 清除通联视窗. 按两下 to erase QSO and Band Activity windows. </td> </tr> </table> <table cellpadding=5> <tr> <th align="right">Click on</th> <th align="left">Action</th> </tr> <tr> <td align="right">Waterfall:</td> <td>Click to set Rx frequency. Right-click to set Tx frequency. Double-right-click to set Rx and Tx frequencies. </td> </tr> <tr> <td align="right">Decoded text:</td> <td>Double-click to copy second callsign to Dx Call, locator to Dx Grid, change Rx and Tx frequency to decoded signal's frequency, and generate standard messages. Hold down Alt to prevent Tx from being enabled on double-click. If Hold Tx Freq is checked or first callsign in message is your own call, Tx frequency is not changed unless Ctrl is held down. </td> </tr> <tr> <td align="right">H Button:</td> <td>Click to toggle FT8 Hound Mode On/Off. Right-click to toggle last used Special Operating Activity On/Off. </td> </tr> <tr> <td align="right">Q65 Button:</td> <td>Click to switch to Q65 Mode. Right-click to switch to Q65 Pileup Mode. </td> </tr> <tr> <td align="right">JT65 Button:</td> <td>Click to switch to JT65 Mode. Right-click to switch to JT9 Mode. </td> </tr> <tr> <td align="right">Tx5 Button:</td> <td>Right-click to retain Tx5 free text. </td> </tr> <tr> <td align="right">Tx Even/1st:</td> <td>Right-click to freeze the state of the checkbox. Right-click on the FT8 Button to unfreeze. </td> </tr> <tr> <td align="right">Enable Tx Button:</td> <td>Click to toggle Auto-Tx mode On/Off. Right-click to toggle Wait & Pounce On/Off. </td> </tr> <tr> <td align="right">Erase button:</td> <td>Click to erase Rx Frequency window. Double-click to erase Rx Frequency and Band Activity windows. If Alternate Erase button behavior is checked: Click to erase Band Activity window. Right-click to erase Rx Frequency window. Double-click to erase Rx Frequency and Band Activity windows. </td> </tr> <tr> <td align="right">DX Call Button:</td> <td>Click to toggle Wait & Call On/Off. Right-click to clear the Dx Call, Dx Grid and Std Msgs. </td> </tr> <tr> <td align="right">Lookup Button:</td> <td>Click to search for callsign in database. Right-click to search for Dx Call on qrz.com. </td> </tr> <tr> <td align="right">Add Button:</td> <td>Click to add callsign and locator to database. Right-click to search for Dx Call on hamqth.com. </td> </tr> <tr> <td align="right">Ignore Button:</td> <td>Click to add callsign to the Ignore List. Right-click to search for Dx Call on qrzcq.com. </td> </tr> <tr> <td align="right">Band Buttons:</td> <td>Click to toggle band / mode default frequencies. Right-click to toggle FT8 DXpedition frequencies. </td> </tr> </table> Mouse commands help window contents <table cellpadding=5> <tr> <th align="right">点击</th> <th align="left">作用</th> </tr> <tr> <td align="right">瀑布:</td> <td>Click 设置接收频率. 右键单击 设置发射频率. 右键双击 设置接收和发射频率. </td> </tr> <tr> <td align="right">解码文本:</td> <td>双击 将第二个呼号复制到Dx呼号, 将网格定位复制到Dx网格, 请更改接收和发射频率转换为解码信号的频率, 并生成标准消息. 按住 Alt 键可防止 双击 时启用发射. 如果 保持发射频率 被选中或者第一个回答您的呼叫 自己呼叫l, 除非按住 Ctrl 否则不改变发射频率. </td> </tr> <tr> <td align="right">H 按钮:</td> <td>单击 切换 FT8 猎犬模式启用/停用. 右键单击 切换上次使用的特殊操作活动启用/停用. </td> </tr> <tr> <td align="right">Q65 按钮:</td> <td>单击 切换到 Q65 模式. 右键单击 切换到 Q65 堆积模式. </td> </tr> <tr> <td align="right">JT65 按钮:</td> <td>单击切换到 JT65 模式. 右键单击 切换到 JT9 模式. </td> </tr> <tr> <td align="right">Tx5 按钮n:</td> <td>右键 要保留Tx5自定义文本. </td> </tr> <tr> <td align="right">发射偶数/第一:</td> <td>右键冻结复选框的状态. 右键单击 FT8 按钮 解冻. </td> </tr> <tr> <td align="right">启用发射按钮:</td> <td>单击切换启用/停用自动发射模式. 右键单击 切换启用/停用等待和突袭. </td> </tr> <tr> <td align="right">擦除按钮:</td> <td>单击 擦除接收信息窗. 双击 擦除接收信息窗和波段活动窗. 如果 替代擦除按钮行为 已选: 单击 擦除波段活动窗. 右键单击 擦除接收信息窗. 双击 擦除接收信息窗和波段活动窗. </td> </tr> <tr> <td align="right">DX 呼号按钮:</td> <td>单击 切换等待和呼叫启用/停用. 右键单击 要清除Dx呼号、Dx网格和标准消息. </td> </tr> <tr> <td align="right">查找按钮:</td> <td>右键单击 或 双击 在 QRZ.com 上搜索DX 呼号. Crtl + 右键单击 在 hamqth.com 上搜索DX 呼号. Alt + 右键单击 在 qrzcq.com 上搜索DX 呼号. </td> </tr> <tr> <td align="right">增加按钮:</td> <td>右键 在 hamqth.com 上搜索DX 呼号. </td> </tr> <tr> <td align="right">忽略按钮:</td> <td>单击 呼号増加到忽略清單. 右键 在 qrzcq.com 上搜索呼号. </td> </tr> <tr> <td align="right">Band按钮:</td> <td>单击 切换波段/模式默认频率. 右键 切换 FT8 DX遠征频率. </td> </tr> </table> This station transmits in the same time slot as you do. You must not start a QSO if both stations Tx even/1st or Tx odd/2nd, while the Tx even/1st checkbox is disabled. Click the MSK144 mode button to re-enable the Tx even/1st checkbox, or choose another station. 这个电台和你在同一个时间段发射信号. 如果两个站都发送偶数/第一, 则不得开始QSO 或发送奇数/第二, 同时禁用发送偶数/第一复选框. 单击MSK144按钮, 重新启用发送偶数/第一复选框, 或选取另一个电台. Should you switch to EU VHF Contest mode? To do so, check 'Special operating activity' and 'EU VHF Contest' on the Settings | Advanced tab. 是否应切换到欧洲 VHF 竞赛模式? 为此, 请检查 '特殊操作活动' 和设置高级选项卡上的 '欧洲 VHF 竞赛'. Should you switch to ARRL Field Day mode? 是否应切换到 ARRL Field Day 模式? Should you switch to RTTY contest mode? 是否应切换到 RTTY 竞赛模式? Add to CALL3.TXT 添加到 CALL3.TXT Please enter a valid grid locator 请输入有效的网格定位 Cannot open "%1" for read/write: %2 无法打开 "%1" 用于读/写: %2 %1 is already in CALL3.TXT, do you wish to replace it? %1 CALL3.TXT已经存在, 你想替换它吗? Warning: DX Call field is empty. 警告: DX 呼号字段为空. Log file error 日志文件错误 Cannot open "%1" 无法打开 "%1" Error sending log to N1MM 将日志发送到 N1MM 时发生错误 Write returned "%1" 写入返回 "%1" Stations calling DXpedition %1 呼叫远征电台 %1 Super Fox 超级狐狸 Super Hound 超级猎犬 Hound 猎犬 Tx Messages 发射信息 Confirm Erase 确认擦除 Are you sure you want to erase file ALL.TXT? 是否确实要擦除 ALL.TXT 文件? Are you sure you want to erase the list of Q65 callers? 是否确实要擦除 Q65呼叫者表? Confirm Reset 确认重置 Are you sure you want to erase your contest log? 是否确实要擦除竞赛日志? Doing this will remove all QSO records for the current contest. They will be kept in the ADIF log file but will not be available for export in your Cabrillo log. 执行此操作将删除当前竞赛的所有通联记录. 它们将保留在 ADIF 日志文件中, 但无法导出到您的Cabrillo日志中. Cabrillo Log saved Cabrillo日志已保存 Are you sure you want to erase file wsjtx_log.adi? 是否确实要擦除 wsjtx_log.adi 文件? Are you sure you want to erase the WSPR hashtable? 是否确实要擦除 WSPR 哈希表? %1 W %1 瓦 SWR > 2.5 !!! Transmission was stopped Check your antenna 驻波比大于 2.5 !!! 发射已停止检查你的天线 Tune digital gain 调谐数码增益 Transmit digital gain 传输数码增益 Prefixes 前缀 Network Error 网络错误 Error: %1 UDP server %2:%3 错误: %1 UDP 服务器 %2:%3 File Error 文件错误 Phase Training Disabled 已禁用阶段训练 Phase Training Enabled 已启用阶段训练 WD:0m WD:溢出 Runaway Tx watchdog 发射监管计时器 WD:%1m WD:%1分 Free Text Message 自定义信息 Message: 信息: Are you sure you want to erase the Tx Log? 您确定要清除发射日志吗? "%1" added to Ignore List "%1" 已添加到忽略列表 Are you sure you want to erase the Ignore List? 您确定要删除忽略列表吗? Log File Error 日志文件错误 Are you sure you want to clear the QSO queues? 是否确实要清除通联队列? QCustomPlot plot examples QCustomPlot plot样本 MessageAveraging Message Averaging 信息平均值 UTC Sync DT Freq Modes Mode 模式 MultiSettings Default 默认值 MultiSettings::impl &Switch To 切换到(&S) &Clone 克隆(&C) Clone &Into ... 克隆到(&I) ... R&eset 重置(&e) &Rename ... 重新命名(&R) ... &Delete 删除(&D) Clone Into Configuration 克隆到配置 Confirm overwrite of all values for configuration "%1" with values from "%2"? 确认覆盖配置 "%1" 的所有值, 以及来自 "%2"的值? Reset Configuration 重置配置 Confirm reset to default values for configuration "%1"? 确认重置为配置的默认值 "%1"? Delete Configuration 删除配置 Confirm deletion of configuration "%1"? 确认删除配置 "%1"? NameDialog New Configuration Name 新配置名称 Old name: 旧名称: &New name: 新名称(&N): NetworkAccessManager Network SSL/TLS Errors SSL/TLS 网络错误 OmniRigTransceiver OmniRig: unrecognized mode OmniRig: 无法识别的模式 Failed to start OmniRig COM server 无法启动 OmniRig COM 服务器 OmniRig: don't know how to set rig frequency OmniRig：不知道如何设置无线电设备频率 OmniRig COM/OLE error: %1 at %2: %3 (%4) OmniRig COM/OLE 错误: %1 at %2: %3 (%4) PollingTransceiver Unexpected rig error 无线电设备意外错误 QObject Failed to open LotW users CSV file: '%1' 无法打开 LotW 用户 CSV 文件: '%1' OOB Too many colours in palette. 调色板中颜色太多. Error reading waterfall palette file "%1:%2" too many colors. 读取瀑布调色板文件时错误 "%1:%2" 太多颜色. Error reading waterfall palette file "%1:%2" invalid triplet. 读取瀑布调色板文件时错误 "%1:%2" 无效的三元组. Error reading waterfall palette file "%1:%2" invalid color. 读取瀑布调色板文件时错误 "%1:%2" 无效的颜色. Error opening waterfall palette file "%1": %2. 读取瀑布调色板文件时错误 "%1": %2. Error writing waterfall palette file "%1": %2. 读取瀑布调色板文件时错误 "%1": %2. RemoteFile File System Error 文件系统错误 Cannot rename file: "%1" to: "%2" Error(%3): %4 无法重命名文件: "%1" 到: "%2" 错误(%3): %4 Cannot delete file: "%1" 无法删除文件: "%1" Network Error 网络错误 Too many redirects: %1 太多重定向: %1 Redirect not followed: %1 未遵循重定向:%1 Cannot commit changes to: "%1" 无法将更改提交给: "%1" Cannot open file: "%1" Error(%2): %3 无法打开文件: "%1" 错误(%2): %3 Cannot make path: "%1" 无法创建路径: "%1" Cannot write to file: "%1" Error(%2): %3 无法写入文件: "%1" 错误(%2): %3 SampleDownloader::impl Download Samples 下载样本 &Abort 中止(&A) &Refresh 刷新(&R) &Details 详情(&D) Base URL for samples: 样本下载网址: Only use HTTP: 仅使用 HTTP: Check this if you get SSL/TLS errors 如果您收到SSL/TLS错误, 请选择此项 Input Error 输入错误 Invalid URL format 无效网址格式 SoundInput An error opening the audio input device has occurred. 打开音频输入设备时错误. An error occurred during read from the audio input device. 从音频输入设备读取时错误. Non-recoverable error, audio input device not usable at this time. 不可恢复的错误, 音频输入设备此时不可用. Requested input audio format is not valid. 请求的输入音频格式无效. Requested input audio format is not supported on device. 设备不支持请求输入的音频格式. Failed to initialize audio sink device 无法初始化音频接收器设备 Idle 闲置 Receiving 接收 Suspended 暂停 Interrupted 中断 Error 错误 Stopped 停止 SoundOutput An error opening the audio output device has occurred. 打开音频输出设备时错误. An error occurred during write to the audio output device. 写入音频输出设备期间错误. Audio data not being fed to the audio output device fast enough. 音频数据未以足够快的速度馈送到音频输出设备. Non-recoverable error, audio output device not usable at this time. 不可恢复的错误, 音频输出设备此时不可用. Requested output audio format is not valid. 请求的输出音频格式无效. Requested output audio format is not supported on device. 设备不支持请求输出的音频格式. No audio output device configured. 未配置音频输出设备. Idle 闲置 Sending 发送 Suspended 暂停 Interrupted 中断 Error 错误 Stopped 停止 StationDialog Add Station 添加电台 &Band: 波段(&B): &Offset (MHz): 偏移 (M&Hz): &Antenna: 天线(&A): StationList::impl Band name 波段名称 Frequency offset 频率偏移 Antenna description 天线描述 Band 波段 Offset 偏移 Antenna Description 天线描述 TransceiverBase Unexpected rig error 无线电设备意外错误 WideGraph Dialog 对话框 Spectrum gain 频谱增益 <html><head/><body>Enter definition for a new color palette.</body></html> <html><head/><body>输入新调色板的定义.</body></html> Adjust... 调整... Total power (dB) 总功率 (分贝) Waterfall gain 瀑布增益 Controls 控制列 Palette 调色板 <html><head/><body>Set fractional size of spectrum in this window.</body></html> <html><head/><body>在此窗口中设置频谱的大小.</body></html> % Spec 占高 <html><head/><body>Flatten spectral baseline over the full displayed interval.</body></html> <html><head/><body>在完整显示的间隔内平展频谱基线.</body></html> Flatten 平坦化 <html><head/><body>Compute and save a reference spectrum. (Not yet fully implemented.)</body></html> <html><head/><body>计算并保存参考频谱. (尚未完全实现.)</body></html> Ref Spec 参考规格 Smoothing of Linear Average spectrum 线性平均频谱的平滑 Smooth 平滑 Compression factor for frequency scale 频率刻度的压缩系数 Bins/Pixel 点/像素 <html><head/><body>Position of time stamp above each interval line</body></html> <html><head/><body>时间戳在每个间隔线上方的位置</body></html> Time stamp 时间戳 Off 取消 Left 左边 Right 右边 Palette 调色板 Select waterfall palette 选择瀑布调色板 Bars 游标条 Freq 频率 <html><head/><body>Select data for spectral display</body></html> <html><head/><body>选择用于频谱显示的数据</body></html> Current 当前 Cumulative 累积 Linear Avg 线性平均 Reference 参考 Q65_Sync Q65_同步 <html><head/><body>Frequency at left edge of waterfall</body></html> <html><head/><body>波段在瀑布左边缘显示</body></html> Hz 赫兹 Start 开始 <html><head/><body>Decode JT9 only above this frequency</body></html> <html><head/><body>仅在此频率以上解码 JT9</body></html> Hz 赫兹 Split 异频 Number of FFTs averaged (controls waterfall scrolling rate) FFT 平均数（控制瀑布滚动速率） N Avg N 平均 Waterfall zero 瀑布零度 Spectrum zero 频谱零度 User Defined 用户定义 Wide Graph 频谱瀑布图 Read Palette 读取调色板 WorkedBefore Invalid ADIF field %0: %1 无效的ADIF字段 %0: %1 Malformed ADIF field %0: %1 格式不正确的ADIF字段 %0: %1 Invalid ADIF header 无效的ADIF标头 Error opening ADIF log file for read: %0 打开ADIF日志文件进行读取时出错: %0 configuration_dialog Settings 设置 Genera&l 常规(&l) General station details and settings. 设置电台详细信息. Station Details 电台资料 My C&all: 我的呼号(&a): Station callsign. 电台呼号. M&y Grid: 我的网格(&y): <html><head/><body>Maidenhead locator, preferably 6 characters.</body></html> <html><head/><body>梅登黑德定位, 最好是 6 个字符.</body></html> Check to allow grid changes from external programs 选择允许从外部程序更改网格 AutoGrid 自动网格 IARU Region: IARU 区域: <html><head/><body>Select your IARU region.</body></html> <html><head/><body>选择您的 IARU 区域.</body></html> Message generation for type 2 compound callsign holders: 信息生成用于类型2复合呼号持有人: <html><head/><body>Type 2 compound callsigns are those with prefixes or suffixes not included in the allowed shortlist (See Help->Add-on prefixes and suffixes).This option determines which generated messages should contain your full type 2 compound call sign rather than your base callsign. It only applies if you have a type 2 compound callsign.This option controls the way the messages that are used to answer CQ calls are generated. Generated messages 6 (CQ) and 5 (73) will always contain your full callsign. The JT65 and JT9 protocols allow for some standard messages with your full call at the expense of another piece of information such as the DX call or your locator.Choosing message 1 omits the DX callsign which may be an issue when replying to CQ calls. Choosing message 3 also omits the DX callsign and many versions of this and other software will not extract the report. Choosing neither means that your full callsign only goes in your message 5 (73) so your QSO partner may log the wrong callsign.None of these options are perfect, message 3 is usually best but be aware your QSO partner may not log the report you send them.</body></html> <html><head/><body>复合呼号类型2是那些前缀或后缀不包括在允许的决选名单中 (请参阅帮助-& gt; 加载项前缀和后缀).此选项确定哪些生成的信息应包含完整类型2复合呼号, 而不是基本呼号.它仅适用于类型为2的复合呼号.此选项控制用于应答 CQ 呼叫的信息的生成方式.生成的信息 6 (CQ) 和 5 (73) 将始终包含您的完整呼号.jt65 和 jt9 协议允许在您的完整呼叫中使用一些标准信息, 而牺牲了另一条信息, 如 DX 呼叫或您的定位器.选择信息1省略DX 呼号, 这在答复 CQ 呼叫时可能是一个问题.选择信息3也会省略 DX 呼号, 此软件和其他软件的许多版本都不会提取报告.选择这两个都意味着你的完整呼号只会出现在你的信息 5 (73) 中, 所以你的通联伙伴我的日志是错误的呼号.这些选项都不是完美的, 信息3是最好的, 但请注意, 您的通联合作伙伴可能不会记录您发送的报告.</body></html> Full call in Tx1 完整呼号在发射1 Full call in Tx3 完整呼号在发射3 Full call in Tx5 only 完整呼号在发射5 Display 显示 Show outgoing transmitted messages in the Rx frequency window. 在接收信息窗口中显示已发射的信息. &Tx messages to Rx frequency window 发出讯息在接收信息窗口显示(&T) Show if decoded stations are new DXCC entities or worked before. 显示解码的电台是新的 DXCC 实体还是以前曾经通联. <html><head/><body>Check to have decodes for a new period start at the top of the Band Activity window and not scroll off the top when the window is full.This is to aid selecting decodes to double-click while decoding is still in progress. Use the Band Activity vertical scroll bar to reveal decodes past the bottom of the window.</body></html> <html><head/><body>新周期的解码信息在波段活动视窗的顶部开始向下滚动.这有助于在解码仍在进行时选择要双击的解码.使波段活动垂直滚动条显示视窗底部的解码.</body></html> Start new period decodes at top 解码信息从上往下滚动 Set the font characteristics for the application. 设置应用程序的字体. Font... 软件字体... Set the font characteristics for the Band Activity and Rx Frequency areas. 设置波段活动和接收信息窗口的字体. Decoded Text Font... 解码字体... Include a separator line between periods in the band activity window. 在波段活动窗口中加入时间分隔行. &Blank line between decoding periods 每个解码周期插入间隔行(&B) Show distance to DX station in miles rather than kilometers. 以英里为单位显示 DX 站的距离而不是显示公里. Display dista&nce in miles 显示距离为英里(&n) Behavior 惯常方式 Decode after EME delay EME 延迟后解码 Tx watchdog: 发射监管计时器: <html><head/><body>Number of minutes before unattended transmissions are aborted</body></html> <html><head/><body>无人值守传输时到达设定分钟数中止发射</body></html> Disabled 停用 minutes 分钟 Single decode 单独解码 <html><head/><body>Some rigs are not able to process CAT commands while transmitting. This means that if you are operating in split mode you may have to uncheck this option.</body></html> <html><head/><body>某些无线电设备在发射时无法处理CAT 命令.这意味着, 如果您在异频模式下运行, 则可能必须取消选中此选项.</body></html> Allow Tx frequency changes while transmitting 允许发射期间改变频率 Don't start decoding until the monitor button is clicked. 软件开启时, 关闭监听按钮. Mon&itor off at startup 开启时关闭监听(&i) <html><head/><body>Check this if you wish to automatically return to the last monitored frequency when monitor is enabled, leave it unchecked if you wish to have the current rig frequency maintained.</body></html> <html><head/><body>如果您希望在启用监听时自动返回到无线电设备最后一个监听频率.</body></html> Monitor returns to last used frequency 开始监听时使用上一次的频率 Alternate F1-F6 bindings 备用 F1-F6 绑定 Turns off automatic transmissions after sending a 73 or any other free text message. 发送 73 或任何其他自由文本消息后关闭自动发射. Di&sable Tx after sending 73 发送 73 后关闭发射(&s) Send a CW ID after every 73 or free text message. 73或自定义信息发出后用CW模式发放你的呼号. CW ID a&fter 73 73发出后用CW模式发放你的呼号(&f) Periodic CW ID Inter&val: 发射CW信息时间间隔(&v): Send a CW ID periodically every few minutes. This might be required under your countries licence regulations. It will not interfere with other users as it is always sent in the quiet period when decoding is done. 每隔几分钟定期发送 CW ID. 这可能是必需根据您所在的国家/地区的执照规定. 它不会干扰其他用户,因为它总是在解码完成后的安静期间发送. Automatic transmission mode. 自动发射模式. Doubl&e-click on call sets Tx enable 双击呼号集启用发射(&e) Calling CQ forces Call 1st CQ呼叫时强制呼叫第1 Show principal prefix instead of country name 显示前缀而不是国家或地区名称 Show &DXCC, grid, and worked-before status 显示 &DXCC, 网格和曾经通联状态 Show DXCC for all messages 所有信息显示DXCC <html><head/><body>Disable the Tune watchdog.</body></html> <html><head/><body>禁用调谐监察器.</body></html> MSK144/Q65: Tx until 73 is received MSK144/Q65: 发射直到接收到73 Tune watchdog 调谐监察器 <html><head/><body>Number of seconds before Tune is aborted</body></html> <html><head/><body>中止调谐前的秒数</body></html> seconds 秒 <html><head/><body>If a station sends locator, calculate and show the distance in Band Activity pane.</body></html> <html><head/><body>如果电台发送定位, 则计算并在波段活动窗中显示距离.</body></html> Show distance in messages with grid 在信息中带网格的显示距离 Show U.S. States in messages with grid 在信息中带有网格的显示美国各州 <html><head/><body>Align the text for DXCC, distance and azimuth.</body></html> <html><head/><body>对齐DXCC, 距离和方位的文本.</body></html> Align DXCC / distance / azimuth 对齐DXCC, 距离和方位 Alternate Erase button behavior 备用擦除按钮行为 <html><head/><body>Increase or decrease the space between massage text and DXCC.</body></html> <html><head/><body>增加或减少信息文本和DXCC之间的间距.</body></html> Enable Wait features 启用等待功能 <html><head/><body>If a station sends a valid Maidenhead locator, calculate and show the great-circle azimuth in Band Activity pane.</body></html> <html><head/><body>如果一个电台发送一个有效的梅登黑德定位, 计算并在波段活动窗格中显示大圆方位角.</body></html> Show azimuth in messages with grid 在信息中带网格的显示方位角 <html><head/><body>Increase or decrease the space between DXCC and distance/azimuth.</body></html> <html><head/><body>增加或减少DXCC和距离/方位角之间的间距.</body></html> Disable button coloring unless mandatory (restart required) 禁用按钮颜色, 除非是强制 (需要重新启动) &Radio 电台(&R) Radio interface configuration settings. 设置无线电设备接口设置. Settings that control your CAT interface. 控制CAT界面的设置. CAT Control CAT控制 Port: 端口: Show principal prefix instead of country name 显示前缀而不是国家或地区名称 Show &DXCC, grid, and worked-before status 显示 &DXCC, 网格和曾经通联状态 Serial port used for CAT control. 用于CAT控制的串行端口. Serial Port Parameters 串口参数 Baud Rate: 波特率: Serial port data rate which must match the setting of your radio. 串行端口数据速率必须与您的无线电设置相匹配. 1200 2400 4800 9600 19200 38400 57600 115200 <html><head/><body>Number of data bits used to communicate with your radio's CAT interface (usually eight).</body></html> <html><head/><body>用于与无线电设备 CAT 接口通信的数据位元 (通常为 8 ).</body></html> Data bits 数据位元 Data Bits 数据位元 D&efault 默认值(&e) Se&ven Se&ven 7 E&ight E&ight 8 <html><head/><body>Number of stop bits used when communicating with your radio's CAT interface(consult you radio's manual for details).</body></html> <html><head/><body>与无线电设备 CAT 接口通信时使用的停止位元(详情请参阅无线电设备手册).</body></html> Stop bits 停止位元 Stop Bits 停止位元 Default 默认值 On&e On&e 1 T&wo T&wo 2 <html><head/><body>Flow control protocol used between this computer and your radio's CAT interface (usually "None" but some require "Hardware").</body></html> <html><head/><body>电脑和无线电设备 CAT 接口之间使用的流量控制协议 (通常是 "None",但有些要求"硬件").</body></html> Handshake 握手方式 &None 无(&N) Software flow control (very rare on CAT interfaces). 软件控制流 (在CAT接口上非常罕见). XON/XOFF Flow control using the RTS and CTS RS-232 control lines not often used but some radios have it as an option and a few, particularly some Kenwood rigs, require it). 使用 RTS 和 CTS RS-232 控制线控制不经常使用但有些无线电设备有它作为一个选项并且很少,特别是一些健伍无线电设备,需要它). &Hardware 硬件(&H) Special control of CAT port control lines. 特殊控制的CAT控制线. Force Control Lines 强制控制线 High 高 Low 低 DTR: RTS: How this program activates the PTT on your radio? 此程序如何激活无线电设备上的 PTT? PTT Method PTT 方法 <html><head/><body>No PTT activation, instead the radio's automatic VOX is used to key the transmitter.Use this if you have no radio interface hardware.</body></html> <html><head/><body>如果您没有无线电设备接口硬件,没法PTT而是使用无线电设备的自动声控来发射,请使用此选项.</body></html> VO&X <html><head/><body>Use the RS-232 DTR control line to toggle your radio's PTT, requires hardware to interface the line.Some commercial interface units also use this method.The DTR control line of the CAT serial port may be used for this or a DTR control line on a different serial port may be used.</body></html> <html><head/><body>使用 RS-232 DTR 控制线路切换无线电设备的 PTT, 需要硬件来接口线路.某些商业接口单元也使用此方法.CAT 串行端口的 DTR 控制线路可用于此或可用于其他串行端口上的 DTR 控制线路.</body></html> &DTR Some radios support PTT via CAT commands, use this option if your radio supports it and you have no other hardware interface for PTT. 一些无线电设备通过CAT命令支持 PTT, 如果您的无线电设备支持此选项请使用此选项而且您没有 PTT的其它硬件接口. C&AT <html><head/><body>Use the RS-232 RTS control line to toggle your radio's PTT, requires hardware to interface the line.Some commercial interface units also use this method.The RTS control line of the CAT serial port may be used for this or a RTS control line on a different serial port may be used. Note that this option is not available on the CAT serial port when hardware flow control is used.</body></html> <html><head/><body>使用 RS-232 RTS 控制线路切换無線電設備的 PTT, 需要硬件来接口线路.某些商业接口单元也使用此方法.CAT 串行端口的 RTS 控制线路可用于此或可能用于其他串行端口上的 RTS 控制线路. 请注意, 使用硬件流控制时, CAT 串行端口上不可用此选项.</body></html> R&TS <html><head/><body>Select the RS-232 serial port utilised for PTT control, this option is available when DTR or RTS is selected above as a transmit method.This port can be the same one as the one used for CAT control.For some interface types the special value CAT may be chosen, this is used for non-serial CAT interfaces that can control serial port control lines remotely (OmniRig for example).</body></html> <html><head/><body>选择用于 PTT 控制的RS-232 串行端口,当选择上述DTR或RTS作为发射方法时,此选项可用.此端口可以与用于CAT控制的端口相同.对于某些接口类型,可以选择特殊值CAT,这用于可以远程控制串口控制线的非串行CAT接口 (例如 omnirig).</body></html> Modulation mode selected on radio. 在无线电设备上选择的调制模式. Mode 模式 <html><head/><body>USB is usually the correct modulation mode,unless the radio has a special data or packet mode settingfor AFSK operation.</body></html> <html><head/><body>上边带通常是正确的调制模式,除非无线电设备具有用于AFSK操作的特殊数据或数据包模式设置.</body></html> US&B 上边带(&B) Don't allow the program to set the radio mode (not recommended but use if the wrong mode or bandwidth is selected). 不允许程序设置无线电设备模式 (不建议使用但如果选择错误的模式或带宽). None 无 If this is available then it is usually the correct mode for this program. 如果这是可用的, 那么它通常是这个程序的正确模式. Data/P&kt 数据/封包(&k) Some radios can select the audio input using a CAT command, this setting allows you to select which audio input will be used (if it is available then generally the Rear/Data option is best). 一些无线电设备可以使用 CAT 命令选择音频输入, 此设置允许您选择将使用的音频输入 (如果可用,则通常后方/数据选项是最佳选择). Transmit Audio Source 无线电设备音频源 Rear&/Data 后方&/数据口 &Front/Mic 前方/麦克风(&F) Rig: 无线电设备: Poll Interval: 轮询间隔: <html><head/><body>Interval to poll rig for status. Longer intervals will mean that changes to the rig will take longer to be detected.</body></html> <html><head/><body>软件与无线电设备沟通的时间间隔.时间间隔较长,意味着对无线电设备的更改需要更长的时间才能检测到.</body></html> s 秒 <html><head/><body>Attempt to connect to the radio with these settings.The button will turn green if the connection is successful or red if there is a problem.</body></html> <html><head/><body>尝试使用这些设置连接到无线电设备.如果连接成功,该按钮将变为绿色; 如果有问题,则为红色.</body></html> Test CAT 测试 CAT Attempt to activate the transmitter. Click again to deactivate. Normally no power should be output since there is no audio being generated at this time. Check that any Tx indication on your radio and/or your radio interface behave as expected. 尝试激活无线电设备. 再次单击以停用.通常没有功率输出因为此时没有音频生成.检查无线电设备和/或您的无线电设备接口上的任何发射指示是否如预期的那样. Test PTT 测试 PTT Split Operation 异频操作 <html><head/><body>Use only VFO A for split operation (the program temporarily changes the QRG of your rig during transmission).</body></html> <html><head/><body>仅使用VFO A进行异频操作 (程序在传输过程中会暂时改变无线电设备的QRG).</body></html> Fake It 软件虚拟 <html><head/><body>Use VFO A+B for split operation (works with many rigs, but requires the use of both VFOs).</body></html> <html><head/><body>使用VFO A+B进行异频操作 (适用于许多无线电设备, 但需要使用两个VFO).</body></html> Rig 无线电设备 <html><head/><body>Don't use split (not recommended).</body></html> <html><head/><body>不要使用异频操作 (不推荐).</body></html> A&udio 音频(&u) Audio interface settings 音频接口设置 Souncard Soundcard 声效卡 Select the audio CODEC to use for transmitting. If this is your default device for system sounds then ensure that all system sounds are disabled otherwise you will broadcast any systems sounds generated during transmitting periods. 选择要用于发射的音频信号. 如果这是您的默认值设备的系统声音然后确保所有系统声音被禁用否则您将任何系统生成的声音向外发射输出. <html><head/><body>Check this option to note any Special Operating Activity in the comments field.</body></html> <html><head/><body>选中此选项可在注释字段中记录任何特殊操作活动.</body></html> Special operating activity to comments 特殊操作活动注释 <html><head/><body>Enter the service port number of the UDP server that WSJT-X should send updates to. If this is zero no updates will be sent.</body></html> <html><head/><body>输入WSJT-X应该向其发送更新的UDP服务器的服务端口号. 如果该值为零则不会发送任何更新.</body></html> Outgoing interfaces: 传出接口: <html><head/><body>When sending updates to a multicast group address it is necessary to specify which network interface(s) to send them to. If the loop-back interface is multicast capable then at least that one will be selected.For most users the loop-back interface is all that is needed, that will allow multiple other applications on the same machine to interoperate with WSJT-X. If applications running on other hosts are to receive status updates then a suitable network interface should be used.On some Linux systems it may be necessary to enable multicast on the loop-back network interface.</body></html> <html><head/><body>向多播组地址发送更新时需要指定将更新发送到哪个网络接口. 如果环回接口支持多播那么将至少选择该接口.对于大多数用户来说环回接口是他们所需要的, 这将允许同一台机器上的多个其他应用程序与WSJT-X进行互操作. 如果运行在其他主机上的应用程序要接收状态更新则应使用合适的网络接口.在某些Linux系统上可能需要在环回网络接口上启用多播.</body></html> <html><head/><body>Sets the number or router hops that multicast datagrams are allowed to make. Almost everyone should set this to 1 to keep outgoing multicast traffic withn the local subnet.</body></html> <html><head/><body>设置允许多点传送数据报的资料元或路由器资料元. 几乎每个人都应该将该值设置为 1 以保持出站多点传送流量在本地子网中.</body></html> Multicast TTL: 多点传送 TTL: Reset Highlighting to WSJT-X default 将高亮显示重置为 wsjt-x 默认值 Reset Highlighting to wsjt-x_improved default 将高亮显示重置为 wsjt-x_improved 默认值 Highlight also messages with 73 or RR73 突出显示 73 或 RR73 信息 <html><head/><body>Highlight callsigns or grids with orange background color. Callsigns and/or grids must be separated by a comma, and there must be a comma after each callsign.</body></html> <html><head/><body>用橙色背景色突出显示呼号或网格. 呼号和/或网格必须用逗号隔开, 每个呼号后面必须有一个逗号.</body></html> Highlight orange: 突出显示橙色: <html><head/><body>Highlight callsigns or grids with blue background color. Callsigns and/or grids must be separated by a comma, and there must be a comma after each callsign.</body></html> <html><head/><body>用蓝色背景色突出显示呼号或网格. 呼号和/或网格必须用逗号隔开, 每个呼号后面必须有一个逗号.</body></html> Highlight blue: 突出显示蓝色: Days since last upload 自上次上传以来的天数 Select the audio CODEC to use for receiving. 选择要用于接收的音频信号. &Input: 输入(&I): Select the channel to use for receiving. 选择要用于接收的通道. Mono 单声道 Left 左声道 Right 右声道 Both 双声道 Select the audio channel used for transmission. Unless you have multiple radios connected on different channels; then you will usually want to select mono or both here. 选择用于发射的音频通道. 除非您在不同无线电设备连接多个到不同的通道; 那么你通常会想要选择单声道或双声道. Enable VHF and submode features 启用甚高频和子模式功能 Additional features 附加功能 Erase Band Activity window after band change 更换频段后抹掉频段活动窗口 Highlight DX Grid in message 突出显示信息中的DX网格 Highlight DX Call in message 突出显示信息中的DX呼号 Clear DX Call after QSO QSO后清除DX呼号 Set Rx frequency to Tx frequency after QSO QSO后将Rx频率设置为Tx频率 Clear DX Grid after QSO QSO后清除DX网格 Map Grid locator to U.S. State 将格网定位映射到美国各州 Ou&tput: 输出(&t): Save Directory 保存目录 Loc&ation: 目录位置(&a): Path to which .WAV files are saved. .WAV 文件被保存到哪条目录. TextLabel Click to select a different save directory for .WAV files. 单击选择不同的保存目录 .WAV 文件. S&elect 选择(&e) AzEl Directory AzEl 目录 Location: 位置: Select 选择 Power Memory By Band 按频段存储功率 Remember power settings by band 按频段功率记忆设置 Enable power memory during transmit 在传输过程中启用功率记忆 Transmit 发射 Enable power memory during tuning 在调谐期间启用功率记忆 Tune 调谐 Tx &Macros 自定义文字(&M) Canned free text messages setup 设置自定义文字 &Add 增加(&A) &Delete 删除(&D) Drag and drop items to rearrange order Right click for item specific actions Click, SHIFT+Click and, CRTL+Click to select items 拖放项目以重新排列顺序右键单击项目特定操作单击, SHIFT+单击和, CRTL+单击以选择项目 Reportin&g 报告(&g) Reporting and logging settings 设置日志和报告 Logging 记录日志 The program will pop up a partially completed Log QSO dialog when you send a 73 or free text message. 当您发送73或自定义文字时,程序将弹出一个部分完成的日志通联对话框. Promp&t me to log QSO 提示我记录通联日志(&t) Op Call: 操作员呼号: Some logging programs will not accept the type of reports saved by this program. Check this option to save the sent and received reports in the comments field. 一些日志程序不接受这种类型的报告由该程序保存. 选中此选项可将发送和接收的报告保存在注释字段. d&B reports to comments 把d&B信号报告写入备注栏 Check this option to force the clearing of the DX Call and DX Grid fields when a 73 or free text message is sent. 选中此选项, 当发送一个 73或自订义文字, 可强制清除 DX 呼号和DX Grid 栏位. Clear &DX call and grid after logging 日志记录后清除 &DX 呼号和DX Grid 栏位 <html><head/><body>Some logging programs will not accept WSJT-X mode names.</body></html> <html><head/><body>某些日志记录程序不接受 WSJT-X 模式名称.</body></html> Con&vert mode to RTTY 把日志记录转成&RTTY模式 <html><head/><body>The callsign of the operator, if different from the station callsign.</body></html> <html><head/><body>操作员的呼号, 如果与电台呼号不同.</body></html> <html><head/><body>Check to have QSOs logged automatically, when complete.</body></html> <html><head/><body>选择当完成通联后, 自动记录.</body></html> Show the separator line between periods with time stamp of the decode period. 用解码周期的时间戳显示周期之间的分隔线. Show blank line with time stamp 显示带有时间戳的空行 <html><head/><body>Tx until 73 is received when in MSK144 or Q65 mode. </body></html> <html><head/><body>在MSK144或Q65模式下, 接收到73之前的Tx. </body></html> <html><head/><body>Open the Astronomical Data window automatically when switching to Q65 or JT65 mode and Decode after EME delay is enabled, and close it when no longer needed.</body></html> <html><head/><body>当切换到Q65或JT65模式自动打开天文数据窗口, 并在EME延迟启用后解码时, 当不再需要时关闭它.</body></html> Auto-open/close Astronomical Data window 自动打开/关闭天文数据窗口 <html><head/><body>Turn the progress bar red while transmitting.</body></html> <html><head/><body>发射时将进度条变为红色.</body></html> Turn progress bar red while transmitting 发射时将进度条变为红色 <html><head/><body>Allow kHz frequency offset entry without 'k' suffix.</body></html> <html><head/><body>允许输入没有 'k' 后缀的kHz频率偏移.</body></html> kHz entry without k (restart required) kHz 输入没有 'k' (需要重启) Update Hamlib 更新 Hamlib 32-bit 32-位元 <html><head/><body>Revert the last Hamlib update. Note: This function is only available on Windows.</body></html> <html><head/><body>还原最后 Hamlib 更新. 注意: 此功能仅在Windows上可用.</body></html> Revert Update 还原更新 <html><head/><body>Download the latest libhamlib-4.dll file from https://n0nb.users.sourceforge.net/. Note: This function is only available on Windows.</body></html> <html><head/><body>从 https://n0nb.users.sourceforge.net/ 下载最新的libhamlib-4.dll文件. 注意: 此功能仅在Windows上可用.</body></html> In use: 在使用: Backed up: 已备份: 64-bit 64-位元 Rig Data 无线电设备数据 <html><head/><body>Stop transmitting immediately when SWR exceeds 2.5.</body></html> <html><head/><body>当驻波比大于 2.5 时立即停止发射.</body></html> Halt Tx when SWR > 2.5 当驻波比大于 2.5 时停止发射 <html><head/><body>Read and display transmit PWR and SWR of your rig.</body></html> <html><head/><body>读取并显示你的无线电设备的发射功率和驻波比.</body></html> Read and display PWR and SWR 读取并显示功率和驻波比 Log automatically (contesting only) 日志自动记录 (仅限竞赛) Network Services 网络服务 <html><head/><body>The program can send your station details and all decoded signals with grid squares as spots to the http://pskreporter.info web site.This is used for reverse beacon analysis which is very useful for assessing propagation and system performance.</body></html> <html><head/><body>程序可以将你的电台详细信息和所有解码信号以网格发送到http://pskreporter.info网站.这用于反向信标分析, 这对于评估传播和系统性能非常有用.</body></html> Enable &PSK Reporter Spotting 启用&PSK Reporter Spotting <html><head/><body>Check this option if a reliable connection is neededMost users do not need this, the default uses UDP which is more efficient. Only check this if you have evidence that UDP traffic from you to PSK Reporter is being lost.</body></html> <html><head/><body>选择此选项需要可靠的连接大多数用户不需要这个, 默认使用UDP, 效率更高. 只有当你有证据表明从你到PSK Reporter的UDP流量丢失时, 才选择这个.</body></html> Use TCP/IP connection 使用TCP/IP连接 UDP Server UDP服务器 UDP Server: UDP服务器: <html><head/><body>Optional hostname of network service to receive decodes.Formats:<ul style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;"><li style=" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">hostname</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 multicast group address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 multicast group address</li></ul>Clearing this field will disable the broadcasting of UDP status updates.</body></html> <html><head/><body>接收解码的网络服务的可选主机名称.格式:<ul style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;"><li style=" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">主机名称</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 地址</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4多点传送组地址</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 多点传送组地址</li></ul>清除此字段将禁用UDP状态更新的广播.</body></html> UDP Server port number: UDP服务器端口: <html><head/><body>With this enabled WSJT-X will accept certain requests back from a UDP server that receives decode messages.</body></html> <html><head/><body>启用此功能后，WSJT-X 将接受来自接收解码消息的 UDP 服务器的某些请求.</body></html> Accept UDP requests 接受UDP请求 <html><head/><body>Indicate acceptance of an incoming UDP request. The effect of this option varies depending on the operating system and window manager, its intent is to notify the acceptance of an incoming UDP request even if this application is minimized or hidden.</body></html> <html><head/><body>指示接受传入的 UDP 请求.此选项的效果因操作系统和窗口管理器而异,其目的是通知接受传入的 UDP 请求,即使此应用程序最小化或隐藏</body></html> Notify on accepted UDP request 接受UDP的请求时通知 <html><head/><body>Restore the window from minimized if an UDP request is accepted.</body></html> <html><head/><body>如果接受 UDP 请求,则从最小化还原窗口.</body></html> Accepted UDP request restores window 接受UDP请求还原窗口 Secondary UDP Server (deprecated) 辅助 UDP 服务器 (已弃用) <html><head/><body>When checked, WSJT-X will broadcast a logged contact in ADIF format to the configured hostname and port. </body></html> <html><head/><body>选中后，WSJT-X 将以 ADIF 格式将记录的联系广播到配置的主机名和端口. </body></html> Enable logged contact ADIF broadcast 启用记录联系 ADIF 广播 Server name or IP address: 服务器名称或 IP 地址: <html><head/><body>Optional host name of N1MM Logger+ program to receive ADIF UDP broadcasts. This is usually 'localhost' or ip address 127.0.0.1Formats:<ul style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;"><li style=" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">hostname</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 multicast group address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 multicast group address</li></ul>Clearing this field will disable broadcasting of ADIF information via UDP.</body></html> <html><head/><body>N1MM Logger+ 程序的可选电脑主机, 用于接收 ADIF UDP 广播. 这通常是 'localhost' 或 IP地址 127.0.0.1格式:<ul style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;"><li style=" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">主机名称</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 地址</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 多播组地址</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 多播组地址</li></ul>清除此字段将禁用通过 UDP 广播 ADIF 信息.</body></html> Server port number: 服务器端口号： <html><head/><body>Enter the port number that WSJT-X should use for UDP broadcasts of ADIF log information. For N1MM Logger+, this value should be 2333. If this is zero, no updates will be broadcast.</body></html> <html><head/><body>输入 WSJT-X 应用于 ADIF 日志信息的 UDP 广播的端口号. 对于 N1MM Logger+, 此值应为 2333. 如果为零, 将不会广播任何更新.</body></html> Frequencies 频率 Default frequencies and band specific station details setup 设置默认值频率和带宽点特定的无线电设备详细信息 <html><head/><body>See "Frequency Calibration" in the WSJT-X User Guide for details of how to determine these parameters for your radio.</body></html> <html><head/><body>阅读 "频率校准" 在 WSJT-X 用户指南中, 有关如何确定无线电的这些参数的详细信息.</body></html> Frequency Calibration 频率校准 Slope: 倾斜率: ppm Intercept: 拦截: Hz 赫兹 Working Frequencies 工作频率 <html><head/><body>Right click to maintain the working frequencies list.</body></html> <html><head/><body>右键单击以保持工作频率列表.</body></html> Station Information 电台信息 Items may be edited. Right click for insert and delete options. 项目可以编辑. 右键单击以插入和删除选项. Colors 颜色 Decode Highlightling 解码突出显示 <html><head/><body>Click to scan the wsjtx_log.adi ADIF file again for worked before information</body></html> <html><head/><body>单击以再次扫描wsjtx_log.adi ADIF文件，获取以前工作过的信息</body></html> Rescan ADIF Log 重新扫描 ADIF 日志 <html><head/><body>Push to reset all highlight items above to default values and priorities.</body></html> <html><head/><body>将上述所有突出显示项重置为默认值和优先级.</body></html> Reset Highlighting 重置突出显示 <html><head/><body>Enable or disable using the check boxes and right-click an item to change or unset the foreground color, background color, or reset the item to default values. Drag and drop the items to change their priority, higher in the list is higher in priority.Note that each foreground or background color may be either set or unset, unset means that it is not allocated for that item's type and lower priority items may apply.</body></html> <html><head/><body>使用复选框启用或禁用项目，并右键单击项目以更改或取消设置前景颜色, 背景颜色, 或将项目重置为默认值. 拖放项目以更改其优先级, 列表中较高的优先级较高.请注意, 每个前景或背景颜色都可以设置或取消设置, 取消设置意味着它未为该项分配, 其类型和低优先级项可能适用.</body></html> <html><head/><body>Check to indicate new DXCC entities, grid squares, and callsigns per mode.</body></html> <html><head/><body>选择以显示每个模式新的 DXCC 实体, 网格和呼号.</body></html> Highlight by Mode 按模式突出显示 Include extra WAE entities 包括额外的 WAE 实体 Check to for grid highlighting to only apply to unworked grid fields 突出显示网格突出显示仅应用于未通联的网格字段 Only grid Fields sought 仅寻求网格字段 <html><head/><body>Controls for Logbook of the World user lookup.</body></html> <html><head/><body>控制 LoTW 用户查找日志.</body></html> Logbook of the World User Validation LoTW 已验证用户 Users CSV file URL: 用户 CSV 文件网址: <html><head/><body>URL of the ARRL LotW user's last upload dates and times data file which is used to highlight decodes from stations that are known to upload their log file to LotW.</body></html> <html><head/><body>ARRL LoTW 用户上次上传日期和时间数据文件的网址, 该文件用于突出显示已知将日志文件上载到 LoTW 的电台的解码.</body></html> URL 网址 <html><head/><body>Push this button to fetch the latest LotW user's upload date and time data file.</body></html> <html><head/><body>按下此按钮即可获取最新的 LoTW 用户的上传日期和时间数据文件.</body></html> Fetch Now 立即获取 Age of last upload less than: 上次上传的日期小于: <html><head/><body>Adjust this spin box to set the age threshold of LotW user's last upload date that is accepted as a current LotW user.</body></html> <html><head/><body>调整此旋转框以设置 LoTW 用户最后一个上传日期的日期阈值, 该日期被接受为当前 LoTW 用户.</body></html> days 天 Advanced 高级设置 <html><head/><body>User-selectable parameters for JT65 VHF/UHF/Microwave decoding.</body></html> <html><head/><body>用户可选参数用于 JT65 VHF/UHF/Microwave 的解码.</body></html> JT65 VHF/UHF/Microwave decoding parameters JT65 VHF/UHF/Microwave 解码参数 Random erasure patterns: 随机擦除模式: <html><head/><body>Maximum number of erasure patterns for stochastic soft-decision Reed Solomon decoder is 10^(n/2).</body></html> <html><head/><body>随机软判决 Reed Solomon 解码器的最大擦除模式数为 10^(n/2).</body></html> Aggressive decoding level: 主动解码级别: <html><head/><body>Higher levels will increase the probability of decoding, but will also increase probability of a false decode.</body></html> <html><head/><body>较高的水平会增加解码的概率, 但也会增加错误解码的概率.</body></html> Two-pass decoding 通过二次解码 Special operating activity: Generation of FT4, FT8, and MSK144 messages 特殊操作活动: 产生FT4, FT8 和 MSK144 信息 NA VHF <html><head/><body>FT8 DXpedition mode: Hound operator calling the DX.</body></html> <html><head/><body>FT8 DX远征模式呼叫DX的猎犬操作员.</body></html> Hound 猎犬 <html><head/><body>North American VHF/UHF/Microwave contests and others in which a 4-character grid locator is the required exchange.</body></html> <html><head/><body>北美 VHF/UHF/Microwave 竞赛和其他需要交换的 4 个字符网格定位器的竞赛.</body></html> NA VHF Contest NA VHF 竞赛 <html><head/><body>FT8 DXpedition mode: Fox (DXpedition) operator.</body></html> <html><head/><body>FT8 DX远征模式: 狐狸 (DX远征) 操作员.</body></html> Fox 狐狸 <html><head/><body>European VHF+ contests requiring a signal report, serial number, and 6-character locator.</body></html> <html><head/><body>欧洲 VHF+ 竞赛需要信号报告, 序列号和 6 个字符定位.</body></html> EU VHF Contest R T T Y Roundup CTY File Download CTY 文件下载 CTY File Version: CTY 文件版本: Download Latest CTY.dat 下载最新的 CTY.dat FT Roundup RTTY Roundup exchange RTTY Roundup 交换 <html><head/><body>FT Roundup and similar contests. Exchange is US state, Canadian province, or "DX".</body></html> <html><head/><body>FT Roundup 和类似的竞赛. 交换是美国州, 加拿大省或 "DX".</body></html> NJ <html><head/><body>ARRL Field Day exchange: number of transmitters, Class, and ARRL/RAC section or "DX".</body></html> <html><head/><body>ARRL Field Day 交换: 发射机数量, 类別, 和 ARRL/RAC 部分或 "DX".</body></html> Special operating activity 特殊操作活动 A R R L Field Day ARRL Field Day Field Day exchange Field Day 交换 FD Exch: FD 交换: 6A SNJ <html><head/><body>Call CQ with an individual contest name instead of TEST, RU, or WW. </body></html> <html><head/><body>用一个单独的竞赛名称呼叫, 而不是CQ TEST, RU, 或 WW. </body></html> <html><head/><body>ARRL International Digital Contest</body></html> ARRL Digi Contest <html><head/><body>World-Wide Digi-mode contest </body></html> <html><head/><body>World-Wide Digi-mode 竞赛</body></html> WW Digital Contest WW Digi Contest <html><head/><body>Exchange 4-character locator instead of signal report. Provides q3-level sensitivities for the DX operator. Especially useful for 6m EME DXpeditions.</body></html> <html><head/><body>交换4字符的定位而不是信号报告. 为DX操作员提供 q3级灵敏度. 对6m EME DX遠征特别有用.</body></html> Q65 Pileup Q65 堆叠 Miscellaneous 杂项 Degrade S/N of .wav file: 降低信噪比的 .wav文件: For offline sensitivity tests 用于离线灵敏度测试 dB 分贝 Receiver bandwidth: 接收器带宽: Hz 赫兹 Tx delay: 发射延迟: Minimum delay between assertion of PTT and start of Tx audio. PTT 验证与发射音频启动之间的最小延迟. s 秒 Tone spacing 音调间距 <html><head/><body>Generate Tx audio with twice the normal tone spacing. Intended for special LF/MF transmitters that use a divide-by-2 before generating RF.</body></html> <html><head/><body>生成具有正常音调间距两倍的发射音频. 适用于在产生射频之前使用除以 2 的特殊 LF/MF 发射器.</body></html> x 2 <html><head/><body>Generate Tx audio with four times the normal tone spacing. Intended for special LF/MF transmitters that use a divide-by-4 before generating RF.</body></html> <html><head/><body>具有正常音调间距四倍的发射音频. 适用于在产生射频之前使用除以 4 的特殊 LF/MF 发射器.</body></html> x 4 Waterfall spectra 瀑布频谱 Low sidelobes 低侧边 Most sensitive 最敏感 <html><head/><body>Call CQ with an individual contest name instead of TEST, RU, or WW (for example CQ PACC).</body></html> <html><head/><body>用一个单独的竞赛名称称呼叫, 而不是CQ TEST, RU, or WW (例如 CQ PACC).</body></html> <html><head/><body>FT Roundup and similar contests. Exchange is US state, Canadian province, or "DX".</body></html> <html><head/><body>FT Roundup 和类似的竞赛. Exchange 是美国州, 加拿大省或 "DX".</body></html> FT Roundup messages FT RU Exch: CQ with individual contest name CQ 单独竞赛名称 Contest name: 竞赛名称: Filters 过滤 Hide messages containing the following callsigns or keywords: 隐藏包含以下呼号或关键字的消息: Show only messages containing the following callsigns or keywords: 仅显示包含以下呼号或关键字的消息: http://lotw.arrl.org/lotw-user-activity.csv CALL3 File Download CALL3 文件下载 CALL3 File Version: CALL3 文件版本: Dowload latest CALL3.TXT file. 下载最新的 CALL3.TXT 文件. Download CALL3.TXT for terrestrial use 下载 CALL3.TXT 供 IARU 分区使用 Dowload latest CALL3.TXT file for EME. This version is suitable for JT65 Deep Search. 为EME下载最新 CALL3.TXT 文件. 该版本适用于 JT65 深度搜索. Download CALL3.TXT for EME 下载 CALL3.TXT 供 EME 使用 <html><head/><body>Toggle the NCCC Sprint FT4 short message protocol On/Off.</body></html> <html><head/><body>启用/停用 NCCC Sprint FT4短信息协议.</body></html> NCCC Sprint <html><head/><body>Autofill 'ZZ00' in the logbook if the other station doesn't send you a grid.</body></html> <html><head/><body>如果另一个电台没有给你发送网格, 在日志中自动填充 'ZZ00'.</body></html> Autofill 'ZZ00' for missing Grid 为缺少的网格自动填充 'ZZ00' Enable Cloudlog Features 启用Cloudlog功能 API URL: API网址: API Key: API密匙: Station ID: 电台 ID: <html><head/><body>Test the Cloudlog API key.The button will turn green if the API key is writable. It will turn orange if the API key is read-only. If the API key is invalid it will turn red.</body></html> <html><head/><body>测试 API密匙.如果API密钥是可写的, 该按钮将变为绿色. 如果API密钥是只读的, 它将变为橙色. 如果API密钥无效, 它将变成红色.</body></html> Test API Key 测试 API密匙 <html><head/><body>Check this box to transmit (Fox) or receive (Hound) the SuperFox waveform.</body></html> <html><head/><body>勾选此框以发送 (狐狸) 或接收 (猎犬) 超级狐狸波形.</body></html> SuperFox mode 超级狐狸模式 Key: 密钥: <html><head/><body>SuperFox operator must enter a valid key to enable transmission.</body></html> <html><head/><body>超级狐狸操作员必须输入有效的密钥才能启用发送.</body></html> GUI tweaks for high-resolution monitors 针对高分辨率显示器的用户介面调整 <html><head/><body>HighDPI scaling enables a larger and more proportionally correct display of the controls on 4K monitors (if supported by the OS).</body></html> <html><head/><body>高DPI 缩放允许在 4K 监视器上显示更大比例更正确的控件 (如果操作系统支持).</body></html> HighDPI scaling (restart required) 高DPI缩放 (需要重启) <html><head/><body>Increased height of some control elements.</body></html> <html><head/><body>增加了一些控件元素的高度.</body></html> Increased height of the tab widget (restart required) 增加了选项卡小部件的高度 (需要重新启动) Alerts 警报 Ensure that your rig is NOT connected via "DefaultAudioDevice" !!! 确保您的无线电设备不是通过 "默认音频设备" 连接的 !!! Audio Alerts 音频警报 New Grid 新网格 My Call in message 我呼号在信息内 My Call 我的呼号 New Continent 新大洲 New ITU Zone 新ITU区 New CQ Zone 新CQ区 New DXCC 新DXCC New DXCC on Band 新DXCC 波段 New ITU Zone on Band 新ITU 区波段 New Continent on Band 新大洲波段 New Grid on Band 新网格波段 New CQ Zone on Band 新CQ区波段 DX Call or DX Grid in message DX呼号或DX网格在信息内 Toggle Audio Alerts on/off. Alerts will be played on "DefaultAudioDevice". DON'T ENABLE AUDIO ALERTS WHEN YOUR RIG IS CONNECTED VIA THIS SOUNDCARD !!! 切換启用/停用音频警报. 警报将在 "默认音频设备" 上播放. 当您的无线电设备通过此声卡连接时, 不要启用音频警报 !!! Enable Audio Alerts 启用音频警报 CQ in message CQ 信息 Use of this feature requires that your computer is equipped with two sound cards. 使用此功能您的计算机需要配备两个声卡. This requirement is fulfilled when your rig is connected via USB audio (FT-991, IC-7300, etc.). 当您的无线电设备通过USB音频 (FT-991, IC-7300, 等) 连接时, 此要求即已满足. Audio Alerts will be played on the default audio device (usually the loudspeaker of your PC). 音频警报将在默认的音频设备 (通常是电脑的扬声器) 上播放. WARNING: THIS FEATURE IS FOR EXPERIENCED USERS ONLY !!! 警告: 此功能仅供有经验的用户使用 !!! IMPORTANT NOTE: Enable Audio Alerts only in case your rig is NOT connected via "DefaultAudioDevice" !!! 重要提示: 仅当您的无线电设备没有通过 "默认音频设备" 连接时才启用音频警报!!! Always pass messages with the following keywords: 总是通过带有以下关键字的讯息: Filters for the Band Activity window 波段活动窗口的过滤器 Territories 1-4 for the Hide checkboxes in the View menu 查看菜单中隐藏复选框的区域1-4 <html><head/><body>Use filters for Wait and Pounce, CQ: First, etc. only (all messages are still displayed).</body></html> <html><head/><body>使用过滤器等待和突袭, CQ:第一, 等. 仅 (仍显示所有消息).</body></html> Use filters for Wait and Pounce, CQ: First, etc. only (all messages are still displayed) 使用过滤器等待和突袭, CQ:第一, 等. 仅 (仍显示所有消息) <html><head/><body>Apply filters only to the callsigns of the calling stations. Usually the second word of the messages is analyzed, for directional calls the third word.</body></html> <html><head/><body>只对呼叫电台的呼号使用过滤. 通常分析消息的第二个字, 对于定向呼叫, 分析第三个字.</body></html> Apply filters only to the callsigns of the calling stations 应用过滤仅对呼叫电台的呼号 Blacklist 黑名单 Whitelist 白名单 Always Pass 总是通过 <html><head/><body>Discard (Cancel) or apply (OK) configuration changes includingresetting the radio interface and applying any soundcard changes</body></html> <html><head/><body>放弃 (取消) 或应用 (确定) 配置更改, 包括重置无线电接口并应用任何声卡更改</body></html> main Failed to create a temporary directory 无法创建临时目录 Path: "%1" 目录: "%1" Failed to create a usable temporary directory 无法创建可用的临时目录 Another application may be locking the directory 另一个应用程序可能正在锁定目录 Failed to create data directory 无法创建数据目录 path: "%1" 目录： "%1" Shared memory error 共享内存错误 Unable to create shared memory segment 无法创建共享内存段 Sub-process error 子进程错误 Failed to close orphaned jt9 process 无法关闭遗留的jt9进程 wf_palette_design_dialog Palette Designer 调色板设计 <html><head/><body>Double click a color to edit it.Right click to insert or delete colors.Colors at the top represent weak signalsand colors at the bottom represent strongsignals. You can have up to 256 colors.</body></html> <html><head/><body>双击一种颜色进行编辑.右键单击可插入或删除颜色.顶部的颜色代表微弱的信号底部的颜色代表强烈信号. 您最多可以有256种颜色.</body></html>