module q65_decode
integer nsnr0,nfreq0
real xdt0
character msg0*37,cq0*3
type :: q65_decoder
procedure(q65_decode_callback), pointer :: callback
contains
procedure :: decode
end type q65_decoder
abstract interface
subroutine q65_decode_callback (this,nutc,snr1,nsnr,dt,freq, &
decoded,idec,nused,ntrperiod)
import q65_decoder
implicit none
class(q65_decoder), intent(inout) :: this
integer, intent(in) :: nutc
real, intent(in) :: snr1
integer, intent(in) :: nsnr
real, intent(in) :: dt
real, intent(in) :: freq
character(len=37), intent(in) :: decoded
integer, intent(in) :: idec
integer, intent(in) :: nused
integer, intent(in) :: ntrperiod
end subroutine q65_decode_callback
end interface
contains
subroutine decode(this,callback,iwave,nqd0,nutc,ntrperiod,nsubmode,nfqso, &
ntol,ndepth,nfa0,nfb0,lclearave,single_decode,lagain,max_drift0, &
lnewdat0,emedelay,mycall,hiscall,hisgrid,nQSOprogress,ncontest, &
lapcqonly,navg0,nqf)
! Top-level routine that organizes the decoding of Q65 signals
! Input: iwave Raw data, i*2
! nutc UTC for time-tagging the decode
! ntrperiod T/R sequence length (s)
! nsubmode Tone-spacing indicator, 0-4 for A-E
! nfqso Target signal frequency (Hz)
! ntol Search range around nfqso (Hz)
! ndepth Optional decoding level
! lclearave Flag to clear the message-averaging arrays
! emedelay Sync search extended to cover EME delays
! nQSOprogress Auto-sequencing state for the present QSO
! ncontest Supported contest type
! lapcqonly Flag to use AP only for CQ calls
! Output: sent to the callback routine for display to user
use timer_module, only: timer
use packjt77
use, intrinsic :: iso_c_binding
use q65 !Shared variables
use prog_args
use types
parameter (NMAX=300*12000) !Max TRperiod is 300 s
parameter (MAX_CALLERS=40) !For multiple q3 decodes in NA VHf Contest mode
class(q65_decoder), intent(inout) :: this
procedure(q65_decode_callback) :: callback
character(len=12) :: mycall, hiscall !Used for AP decoding
character(len=6) :: hisgrid
character*37 decoded !Decoded message
character*37 decodes(100)
character*77 c77
character*78 c78
character*6 cutc
character c6*6,c4*4,cmode*4
character*80 fmt
integer*2 iwave(NMAX) !Raw data
real, allocatable :: dd(:) !Raw data
real xdtdecodes(100)
real f0decodes(100)
integer dat4(13) !Decoded message as 12 6-bit integers
integer dgen(13)
integer nqf(20)
integer stageno !Added by W3SZ
integer time
logical lclearave,lnewdat0,lapcqonly,unpk77_success
logical single_decode,lagain
complex, allocatable :: c00(:) !Analytic signal, 6000 Sa/s
complex, allocatable :: c0(:) !Analytic signal, 6000 Sa/s
type(q3list) callers(MAX_CALLERS)
! Start by setting some parameters and allocating storage for large arrays
call sec0(0,tdecode)
stageno=0
ndecodes=0
decodes=' '
f0decodes=0.
xdtdecodes=0.
nfa=nfa0
nfb=nfb0
nqd=nqd0
lnewdat=lnewdat0
max_drift=max_drift0
idec=-1
idf=0
idt=0
nrc=-2
mode_q65=2**nsubmode
npts=ntrperiod*12000
nfft1=ntrperiod*12000
nfft2=ntrperiod*6000
npasses=1
nhist2=0
if(lagain) ndepth=ior(ndepth,3) !Use 'Deep' for manual Q65 decodes
dxcall13=hiscall ! initialize for use in packjt77
mycall13=mycall
if(ncontest.eq.1) then
! NA VHF, WW-Digi, or ARRL Digi Contest
open(24,file=trim(data_dir)//'/tsil.3q',status='unknown', &
form='unformatted')
read(24,end=2) nhist2
if(nhist2.ge.1 .and. nhist2.le.40) then
read(24,end=2) callers(1:nhist2)
now=time()
do i=1,nhist2
hours=(now - callers(i)%nsec)/3600.0
if(hours.gt.24.0) then
callers(i:nhist2-1)=callers(i+1:nhist2)
nhist2=nhist2-1
endif
enddo
else
nhist2=0
endif
2 close(24)
endif
! Determine the T/R sequence: iseq=0 (even), or iseq=1 (odd)
n=nutc
if(ntrperiod.ge.60 .and. nutc.le.2359) n=100*n
write(cutc,'(i6.6)') n
read(cutc,'(3i2)') ih,im,is
nsec=3600*ih + 60*im + is
iseq=mod(nsec/ntrperiod,2)
if(lclearave) call q65_clravg
allocate(dd(npts))
allocate (c00(0:nfft1-1))
allocate (c0(0:nfft1-1))
if(lagain) then
call q65_hist(nfqso,dxcall=hiscall,dxgrid=hisgrid)
endif
nsps=1800
if(ntrperiod.eq.30) then
nsps=3600
else if(ntrperiod.eq.60) then
nsps=7200
else if(ntrperiod.eq.120) then
nsps=16000
else if(ntrperiod.eq.300) then
nsps=41472
endif
baud=12000.0/nsps
this%callback => callback
nFadingModel=1
! ibwa=max(1,int(1.8*log(baud*mode_q65)) + 5)
!### This needs work!
ibwa=1 !Q65-60A
if(mode_q65.eq.2) ibwa=3 !Q65-60B
if(mode_q65.eq.4) ibwa=8 !Q65-60C
if(mode_q65.eq.8) ibwa=8 !Q65-60D
if(mode_q65.eq.16) ibwa=8 !Q65-60E
!###
! ibwb=min(15,ibwa+4)
ibwb=min(15,ibwa+6)
maxiters=40
if(iand(ndepth,3).eq.2) maxiters=60
if(iand(ndepth,3).eq.3) then
ibwa=max(1,ibwa-2)
ibwb=min(15,ibwb+2)
maxiters=100
endif
! Generate codewords for full-AP list decoding
if(ichar(hiscall(1:1)).eq.0) hiscall=' '
if(ichar(hisgrid(1:1)).eq.0) hisgrid=' '
ncw=0
if(nqd.eq.1 .or. lagain .or. ncontest.eq.1) then
if(ncontest.eq.1) then
call q65_set_list2(mycall,hiscall,hisgrid,callers,nhist2, &
codewords,ncw)
else
call q65_set_list(mycall,hiscall,hisgrid,codewords,ncw)
endif
endif
dgen=0
call q65_enc(dgen,codewords) !Initialize the Q65 codec
nused=1
iavg=0
! W3SZ patch: Initialize AP params here, rather than afer the call to ana64().
call ft8apset(mycall,hiscall,ncontest,apsym0,aph10) ! Generate ap symbols
where(apsym0.eq.-1) apsym0=0
npasses=2
if(nQSOprogress.eq.5) npasses=3
call timer('q65_dec0',0)
! Call top-level routine in q65 module: establish sync and try for a
! q3 or q0 decode.
call q65_dec0(iavg,iwave,ntrperiod,nfqso,ntol,lclearave, &
emedelay,xdt,f0,snr1,width,dat4,snr2,idec,stageno)
call timer('q65_dec0',1)
if(idec.ge.0) then
dtdec=xdt !We have a q3 or q0 decode at nfqso
f0dec=f0
go to 100
endif
if(ncontest.eq.1 .and. lagain .and. iand(ndepth,16).eq.16) go to 50
if(ncontest.eq.1 .and. lagain .and. iand(ndepth,16).eq.0) go to 100
! Prepare for a single-period decode with iaptype = 0, 1, 2, or 4
jpk0=(xdt+1.0)*6000 !Index of nominal start of signal
if(ntrperiod.le.30) jpk0=(xdt+0.5)*6000 !For shortest sequences
if(jpk0.lt.0) jpk0=0
call ana64(iwave,npts,c00) !Convert to complex c00() at 6000 Sa/s
if(lapcqonly) npasses=1
iaptype=0
do ipass=0,npasses !Loop over AP passes
apmask=0 !Try first with no AP information
apsymbols=0
if(ipass.ge.1) then
! Subsequent passes use AP information appropiate for nQSOprogress
call q65_ap(nQSOprogress,ipass,ncontest,lapcqonly,iaptype, &
apsym0,apmask1,apsymbols1)
write(c78,1050) apmask1
1050 format(78i1)
read(c78,1060) apmask
1060 format(13b6.6)
write(c78,1050) apsymbols1
read(c78,1060) apsymbols
endif
call timer('q65loop1',0)
call q65_loops(c00,npts/2,nsps/2,nsubmode,ndepth,jpk0, &
xdt,f0,iaptype,xdt1,f1,snr2,dat4,idec)
call timer('q65loop1',1)
if(idec.ge.0) then
dtdec=xdt1
f0dec=f1
go to 100 !Successful decode, we're done
endif
enddo ! ipass
if(iand(ndepth,16).eq.0 .or. navg(iseq).lt.2) go to 100
! There was no single-transmission decode. Try for an average 'q3n' decode.
50 iavg=1
call timer('list_avg',0)
! Call top-level routine in q65 module: establish sync and try for a q3
! decode, this time using the cumulative 's1a' symbol spectra.
call q65_dec0(iavg,iwave,ntrperiod,nfqso,ntol,lclearave, &
emedelay,xdt,f0,snr1,width,dat4,snr2,idec,stageno)
call timer('list_avg',1)
if(idec.ge.0) then
dtdec=xdt !We have a list-decode result from averaged data
f0dec=f0
nused=navg(iseq)
go to 100
endif
! There was no 'q3n' decode. Try for a 'q[0124]n' decode.
! Call top-level routine in q65 module: establish sync and try for a q[012]n
! decode, this time using the cumulative 's1a' symbol spectra.
call timer('q65_avg ',0)
iavg=2
call q65_dec0(iavg,iwave,ntrperiod,nfqso,ntol,lclearave, &
emedelay,xdt,f0,snr1,width,dat4,snr2,idec,stageno)
call timer('q65_avg ',1)
if(idec.ge.0) then
dtdec=xdt !We have a q[012]n result
f0dec=f0
nused=navg(iseq)
endif
100 if(idec.lt.0 .and. max_drift.eq.50) then
stageno = 5
call timer('q65_dec0',0)
! Call top-level routine in q65 module: establish sync and try for a
! q3 or q0 decode.
call q65_dec0(iavg,iwave,ntrperiod,nfqso,ntol,lclearave, &
emedelay,xdt,f0,snr1,width,dat4,snr2,idec,stageno)
call timer('q65_dec0',1)
if(idec.ge.0) then
dtdec=xdt !We have a q[012]n result
f0dec=f0
endif
endif ! if(idec.lt.0)
decoded=' '
if(idec.ge.0) then
! idec Meaning
! ------------------------------------------------------
! -1: No decode
! 0: Decode without AP information
! 1: Decode with AP for "CQ ? ?"
! 2: Decode with AP for "MyCall ? ?"
! 3: Decode with AP for "MyCall DxCall ?"
! Unpack decoded message for display to user
write(c77,1000) dat4(1:12),dat4(13)/2
1000 format(12b6.6,b5.5)
call unpack77(c77,1,decoded,unpk77_success) !Unpack to get decoded
idupe=0
do i=1,ndecodes
if(decodes(i).eq.decoded) idupe=1
enddo
if(idupe.eq.0) then
ndecodes=min(ndecodes+1,100)
decodes(ndecodes)=decoded
f0decodes(ndecodes)=f0dec
xdtdecodes(ndecodes)=dtdec
call q65_snr(dat4,dtdec,f0dec,mode_q65,snr2)
nsnr=nint(snr2)
call this%callback(nutc,snr1,nsnr,dtdec,f0dec,decoded, &
idec,nused,ntrperiod)
if(ncontest.eq.1) then
call q65_hist2(nint(f0dec),decoded,callers,nhist2)
else
call q65_hist(nint(f0dec),msg0=decoded)
endif
if(iand(ndepth,128).ne.0 .and. .not.lagain .and. &
int(abs(f0dec-nfqso)).le.ntol ) call q65_clravg !AutoClrAvg
call sec0(1,tdecode)
open(22,file=trim(data_dir)//'/q65_decodes.txt',status='unknown', &
position='append',iostat=ios)
if(ios.eq.0) then
! Save decoding parameters to q65_decoded.dat, for later analysis.
write(cmode,'(i3)') ntrperiod
cmode(4:4)=char(ichar('A')+nsubmode)
c6=hiscall(1:6)
if(c6.eq.' ') c6='<b> '
c4=hisgrid(1:4)
if(c4.eq.' ') c4='<b> '
fmt='(i6.4,1x,a4,i5,4i2,8i3,i4,f6.2,f7.1,f6.1,f7.1,f6.2,'// &
'1x,a6,1x,a6,1x,a4,1x,a)'
if(ntrperiod.le.30) fmt(5:5)='6'
if(idec.eq.3) nrc=0
write(22,fmt) nutc,cmode,nfqso,nQSOprogress,idec,idfbest,idtbest, &
ibwa,ibwb,ibw,ndistbest,nused,icand,ncand,nrc,ndepth,xdt, &
f0,snr2,plog,tdecode,mycall(1:6),c6,c4,trim(decoded)
close(22)
endif
endif
endif
navg0=1000*navg(0) + navg(1)
if(single_decode .or. lagain) go to 900
do icand=1,ncand
! Prepare for single-period candidate decodes with iaptype = 0, 1, 2, or 4
snr1=candidates(icand,1)
xdt= candidates(icand,2)
f0 = candidates(icand,3)
do i=1,ndecodes
fdiff=f0-f0decodes(i)
if(fdiff.gt.-baud*mode_q65 .and. fdiff.lt.65*baud*mode_q65) go to 800
enddo
!### TEST REGION
if(ncontest.eq.-1) then
call timer('q65_dec0',0)
! Call top-level routine in q65 module: establish sync and try for a
! q3 or q0 decode.
call q65_dec0(iavg,iwave,ntrperiod,nint(f0),ntol,lclearave, &
emedelay,xdt,f0,snr1,width,dat4,snr2,idec,stageno)
call timer('q65_dec0',1)
if(idec.ge.0) then
dtdec=xdt !We have a q3 or q0 decode at f0
f0dec=f0
go to 200
endif
endif
!###
jpk0=(xdt+1.0)*6000 !Index of nominal start of signal
if(ntrperiod.le.30) jpk0=(xdt+0.5)*6000 !For shortest sequences
if(jpk0.lt.0) jpk0=0
call ana64(iwave,npts,c00) !Convert to complex c00() at 6000 Sa/s
call ft8apset(mycall,hiscall,ncontest,apsym0,aph10) ! Generate ap symbols
where(apsym0.eq.-1) apsym0=0
npasses=2
if(nQSOprogress.eq.5) npasses=3
if(lapcqonly) npasses=1
iaptype=0
do ipass=0,npasses !Loop over AP passes
! write(*,3001) nutc,icand,ipass,f0,xdt,snr1
!3001 format('a',i5.4,2i3,3f7.1)
apmask=0 !Try first with no AP information
apsymbols=0
if(ipass.ge.1) then
! Subsequent passes use AP information appropiate for nQSOprogress
call q65_ap(nQSOprogress,ipass,ncontest,lapcqonly,iaptype, &
apsym0,apmask1,apsymbols1)
write(c78,1050) apmask1
read(c78,1060) apmask
write(c78,1050) apsymbols1
read(c78,1060) apsymbols
endif
call timer('q65loop2',0)
call q65_loops(c00,npts/2,nsps/2,nsubmode,ndepth,jpk0, &
xdt,f0,iaptype,xdt1,f1,snr2,dat4,idec)
call timer('q65loop2',1)
! write(*,3001) '=e',nfqso,ntol,ndepth,xdt,f0,idec
if(idec.ge.0) then
dtdec=xdt1
f0dec=f1
go to 200 !Successful decode, we're done
endif
enddo ! ipass
200 decoded=' '
if(idec.ge.0) then
! Unpack decoded message for display to user
write(c77,1000) dat4(1:12),dat4(13)/2
call unpack77(c77,1,decoded,unpk77_success) !Unpack to get decoded
idupe=0
do i=1,ndecodes
if(decodes(i).eq.decoded) idupe=1
enddo
if(idupe.eq.0) then
ndecodes=min(ndecodes+1,100)
decodes(ndecodes)=decoded
f0decodes(ndecodes)=f0dec
call q65_snr(dat4,dtdec,f0dec,mode_q65,snr2)
nsnr=nint(snr2)
call this%callback(nutc,snr1,nsnr,dtdec,f0dec,decoded, &
idec,nused,ntrperiod)
if(ncontest.eq.1) then
call q65_hist2(nint(f0dec),decoded,callers,nhist2)
else
call q65_hist(nint(f0dec),msg0=decoded)
endif
if(iand(ndepth,128).ne.0 .and. .not.lagain .and. &
int(abs(f0dec-nfqso)).le.ntol ) call q65_clravg !AutoClrAvg
call sec0(1,tdecode)
ios=1
open(22,file=trim(data_dir)//'/q65_decodes.txt',status='unknown',&
position='append',iostat=ios)
if(ios.eq.0) then
! Save decoding parameters to q65_decoded.dat, for later analysis.
write(cmode,'(i3)') ntrperiod
cmode(4:4)=char(ichar('A')+nsubmode)
c6=hiscall(1:6)
if(c6.eq.' ') c6='<b> '
c4=hisgrid(1:4)
if(c4.eq.' ') c4='<b> '
fmt='(i6.4,1x,a4,i5,4i2,8i3,i4,f6.2,f7.1,f6.1,f7.1,f6.2,'// &
'1x,a6,1x,a6,1x,a4,1x,a)'
if(ntrperiod.le.30) fmt(5:5)='6'
if(idec.eq.3) nrc=0
write(22,fmt) nutc,cmode,nfqso,nQSOprogress,idec,idfbest, &
idtbest,ibwa,ibwb,ibw,ndistbest,nused,icand,ncand,nrc, &
ndepth,xdt,f0,snr2,plog,tdecode,mycall(1:6),c6,c4, &
trim(decoded)
close(22)
endif
endif
endif
800 continue
enddo ! icand
if(iavg.eq.0 .and.navg(iseq).ge.2 .and. iand(ndepth,16).ne.0) go to 50
900 if(ncontest.ne.1 .or. lagain) go to 999
if(ntrperiod.ne.60 .or. nsubmode.ne.0) go to 999
! This is first time here, and we're running Q65-60A in NA VHF Contest mode.
! Return a list of potential sync frequencies at which to try q3 decoding.
k=0
nqf=0
bw=baud*mode_q65*65
do i=1,ncand
! snr1=candidates(i,1)
! xdt= candidates(i,2)
f0 = candidates(i,3)
do j=1,ndecodes ! Already decoded one at or near this frequency?
fj=f0decodes(j)
if(f0.gt.fj-5.0 .and. f0.lt.fj+bw+5.0) go to 990
enddo
k=k+1
nqf(k)=nint(f0)
990 continue
enddo
999 return
end subroutine decode
end module q65_decode