mirror of https://github.com/saitohirga/WSJT-X.git
187 lines
8.0 KiB
Plaintext
187 lines
8.0 KiB
Plaintext
White Paper: FT8 for DXpeditions
|
|
-----------------------------------
|
|
Joe Taylor, K1JT - October 27, 2017
|
|
|
|
Assumptions:
|
|
|
|
1. WSJT-X will have two distinct options that enable the maximum-rate
|
|
QSO exchanges described below. Fox must select "Fox"; all Hounds must
|
|
select "Hound".
|
|
|
|
2. There will be an announced basic dial frequency for each band, say
|
|
f0=14082 kHz for 20m. This is the basic Channel.
|
|
|
|
3. Fox always transmits in the 1st sequence, 200-800 Hz above f0.
|
|
|
|
4. Hounds call in 2nd sequence, 1000-5000 Hz above f0. Hounds
|
|
transmitting below f0+1000 Hz will not be answered.
|
|
|
|
5. If found necessary, additional Channels may be defined in which
|
|
Hounds can transmit. (However, I suggest that CQ-by-call-area may
|
|
be easier to implement and use; and the software could be made to
|
|
prevent Hounds in the wrong area from transmitting.)
|
|
|
|
6. Ideally, Fox and Hounds should all use CAT control configured with
|
|
*Split Operation* set to *Rig* or *Fake It*, and transceiver dial
|
|
frequencies should best be calibrated to within a few Hz. (WSJT-X
|
|
provides tools that make this fairly easy to do.)
|
|
|
|
|
|
When Fox is running a pileup, QSOs will look something like the
|
|
following exchanges. Here I've assumed the Fox callsign is KH1DX,
|
|
his locator AJ10:
|
|
|
|
------------------------------------------------------------------------
|
|
Fox Hounds
|
|
------------------------------------------------------------------------
|
|
1. CQ KH1DX AJ10
|
|
2. KH1DX K1ABC FN42, KH1DX W9XYZ EN37, ...
|
|
3. K1ABC KH1DX -13
|
|
4. KH1DX K1ABC R-11
|
|
5. K1ABC RR73; W9XYZ <KH1DX> -17
|
|
6. ... no copy from W9XYZ ...
|
|
7. W9XYZ KH1DX -17
|
|
8. ... no copy from W9XYZ ...
|
|
9. G4AAA KH1DX -11
|
|
10. KH1DX G4AAA R-03
|
|
11. G4AAA RR73; DL3BBB <KH1DX> -12
|
|
12. KH1DX DL3BBB R-09
|
|
13. DL3BBB RR73; DE <KH1DX>
|
|
14. ...
|
|
------------------------------------------------------------------------
|
|
|
|
All messages except those containing "<...>" are standard FT8 messages
|
|
(i3bit=0, iFreeText=0). Hounds transmit only standard messages.
|
|
|
|
Fox transmits standard messages and also special messages with
|
|
i3bit=1. The special messages contain a callsign whose completed QSO
|
|
is being acknowledged; a callsign for the next station to be worked; a
|
|
hash code corresponding to the Fox callsign; and a signal report.
|
|
Users will see the Fox callsign enclosed in angle brackets, <KH1DX>.
|
|
The 72-bit message payload contains two 28-bit callsigns, a 10-bit
|
|
hash code, and a 6-bit signal report. If no call has been queued up
|
|
by Fox for the next QSO, the acknowledgment message takes the
|
|
abbreviated form shown in line 13 above.
|
|
|
|
When a Hound receives a message with i3bit=1, the decoder interprets
|
|
the remaining 72 bits as described above. If the 10-bit hash code
|
|
matches that for Fox's callsign, the message is displayed as in the
|
|
QSO exchanges shown above. Otherwise the message is considered a
|
|
false decode and is not displayed.
|
|
|
|
|
|
Station Setup and Operation for FOX
|
|
-----------------------------------
|
|
|
|
A wide Rx bandwidth (up to 5 kHz) is selected. The basic dial
|
|
frequency is set 1 kHz above f0 (thus 14083 kHz in my example) and the
|
|
audio TxFreq somewhere between -200 and -800 Hz. (Yes, negative
|
|
numbers are OK. *Split Operation* will reset the Tx dial frequency as
|
|
needed and will keep the generated Tx audio frequency between 1500 and
|
|
2000 Hz.) Hounds with audio TxFreq set to N Hz will be received by Fox
|
|
at N-1000 Hz.
|
|
|
|
WSJT-X at Fox will maintain and display a list of all decoded Hounds
|
|
calling Fox in the past 2 to 4 Rx cycles. The list might look
|
|
something like this (but typically will be much longer):
|
|
|
|
----------------------------
|
|
Call Grid Rpt Freq
|
|
----------------------------
|
|
AA2UK FM29 -11 240
|
|
AD9H EN61 +02 1260
|
|
K0TPP EM48 -15 1980
|
|
N2BJ EN61 +11 540
|
|
N4NDR EL98 -17 4620
|
|
NX4E EM70 +00 3780
|
|
ON3LA JN29 -10 3300
|
|
PD9BG JO21 -21 2100
|
|
PJ4/KA1XYZ FK60 -07 1020
|
|
VE1SKY FN74 +03 1620
|
|
WB2REM EL97 -13 3060
|
|
...
|
|
----------------------------
|
|
|
|
Fox can choose to have the list sorted on any column.
|
|
|
|
Fox selects a Hound to call next by clicking on a line. Or he can hit
|
|
"F1" to have the program select a caller according to one of these
|
|
criteria (maybe others as well?):
|
|
|
|
- Weakest caller
|
|
- Strongest caller
|
|
- Strongest one below -N dB (with N selectable)
|
|
- Choose a call at random
|
|
- Random choice with S/N between snrMin and snrMax dB.
|
|
|
|
After a particular Hound has been called, Fox's Auto-Sequencer looks
|
|
for a response containing "R+rpt" originating from that same callsign.
|
|
If such a message is received, Fox's next transmission will be the
|
|
special "acknowledge-and-call-next" type, with i3bit=1. If the
|
|
expected message is not received, as in example line 6 above, the
|
|
report is sent to the same station again. If the second attempt fails
|
|
and another Hound callsign has been queued up, the QSO is aborted and
|
|
the next Hound is called.
|
|
|
|
|
|
Station Setup and Operation for Hounds
|
|
--------------------------------------
|
|
|
|
Dial frequency is set to f0, 14082 kHz in my example. Rx bandwidth and
|
|
displayed range on the Wide Graph can be anything convenient, say 200
|
|
to 2600 Hz. (Signal from Fox will be expected between 200 and 800
|
|
Hz.) Enter callsign and locator of Fox on WSJT-X main window as *DX
|
|
Call* and *DX Grid*. Choose a TxFreq offset of 1000 + 60*N for some N
|
|
in the range 1 to 80 (maybe even higher?). Move TxFreq as desired,
|
|
hoping to find a clear slot, by using Shift+F11 and Shift+F12.
|
|
|
|
- Hit F1 to call Fox in your next Tx sequence. Yes, you must hit F1
|
|
repeatedly, in order to keep calling.
|
|
|
|
- The Auto-sequencer will watch for a decoded message that contains
|
|
"MyCall DXcall rpt" or "MyCall <DXcall> rpt". When one of these is
|
|
received, your next transmission will be "DXcall MyCall R+rpt",
|
|
sent automatically.
|
|
|
|
- After you send the "R+rpt" message, AutoSeq will watch for a
|
|
message that starts with "MyCall RR73; ...". When that is
|
|
received, you're in his log, and you'll be prompted to log the QSO.
|
|
|
|
Random thoughts
|
|
---------------
|
|
|
|
Fox's decoder has access to signals in a 4 kHz (maybe even 5 kHz?)
|
|
window. At 60 Hz intervals, that's enough for around 65 (or 80?)
|
|
non-overlapping Hound signals. If the pileup becomes too deep, more
|
|
spectrum might be used; but note that WSJT-X can't access more than 5
|
|
kHz at one time. A better solution might be for Fox to call "CQ n
|
|
KH1DX AJ10", where n is a single digit indicating call area. The
|
|
decoder could then limit the list of eligible calls to those in the
|
|
specified call area. After decoding such a CQ, the software at Hound
|
|
could refuse to transmit unless MyCall falls in the specified call
|
|
area. (Other special CQ formats can be imagined that would limit the
|
|
eligible Hound callsigns even further.)
|
|
|
|
We haven't thought much, yet, about logging issues for Fox. I imagine
|
|
we could do what's necessary to join a N1MM+ logging network, if that's
|
|
deemed desirable.
|
|
|
|
A few questions:
|
|
|
|
Q1: Should the Auto-Sequencer allow for other cases in which a QSO has
|
|
been initiated by Fox, but one of next two messages is not copied by
|
|
either Fox or Hound? For example, what if K1ABC does not copy message
|
|
#5? Should he keep sending his message "KH1DX K1ABC R-11" ? If Fox
|
|
receives this message again, should he acknowledge again? And poor
|
|
W9XYZ, who never received an acknowledgment, will probably keep
|
|
sending "KH1DX W9XYZ R-19", or whatever. If Fox eventually copies the
|
|
message, should the program remember that W9XYZ had been called, and
|
|
thus send him an acknowledgment?
|
|
|
|
Q2: Should we provide a stack for several to-be-called callsigns,
|
|
rather than just one? Should re-ordering of calls in the stack be
|
|
permitted?
|
|
|
|
Q3: Can we handle WSJT-X "Type 1" and "Type 2" compound callsigns, for
|
|
Hounds?
|