WSJT-X/INSTALL
2019-06-07 09:04:55 -05:00

381 lines
13 KiB
Plaintext

__ __ ______ _____ ________ __ __
| \ _ | \ / \ | \| \ | \ | \
| $$ / \ | $$| $$$$$$\ \$$$$$ \$$$$$$$$ | $$ | $$
| $$/ $\| $$| $$___\$$ | $$ | $$ ______ \$$\/ $$
| $$ $$$\ $$ \$$ \ __ | $$ | $$| \ >$$ $$
| $$ $$\$$\$$ _\$$$$$$\| \ | $$ | $$ \$$$$$$/ $$$$\
| $$$$ \$$$$| \__| $$| $$__| $$ | $$ | $$ \$$\
| $$$ \$$$ \$$ $$ \$$ $$ | $$ | $$ | $$
\$$ \$$ \$$$$$$ \$$$$$$ \$$ \$$ \$$
Installing WSJT-X
=================
Binary packages of WSJT-X are available from the project web site:
http://www.physics.princeton.edu/pulsar/K1JT/wsjtx.html
Building from Source
====================
On Linux systems some of the prerequisite libraries are available in
the mainstream distribution repositories. They are Qt v5 and FFTW v3.
For MS Windows see the section "Building from Source on MS Windows"
below. For Apple Mac see the section "Building from Source on Apple
Mac".
Qt v5, preferably v5.5 or later is required to build WSJT-X.
Qt v5 multimedia support, serial port, and Linguist is necessary as
well as the core Qt v5 components, normally installing the Qt
multimedia development, Qt serialport development packages, and the Qt
Linguist packages are sufficient to pull in all the required Qt
components and dependants as a single transaction. On some systems
the Qt multimedia plugin component is separate in the distribution
repository an it may also need installing.
The single precision FFTW v3 library libfftw3f is required along with
the libfftw library development package. Normally installing the
library development package pulls in all the FFTW v3 libraries
including the single precision variant.
The Hamlib library optionally requires the libusb-1.0 library, if the
development version (libusb-1.0-dev) is available Hamlib will
configure its custom USB device back end drivers. Most rigs do not
require this so normally you can choose not to install libusb-1.0-dev
but if you have a SoftRock USB or similar SDR that uses a custom USB
interface then it is required.
The Hamlib library is required. Currently WSJT-X needs to be built
using a forked version of the Hamlib git master. This fork contains
patches not yet accepted by the Hamlib development team which are
essential for correct operation of WSJT-X. To build the Hamlib fork
from sources something like the following recipe should suffice:
$ mkdir ~/hamlib-prefix
$ cd ~/hamlib-prefix
$ git clone git://git.code.sf.net/u/bsomervi/hamlib src
$ cd src
$ git checkout integration
$ ./bootstrap
$ mkdir ../build
$ cd ../build
$ ../src/configure --prefix=$HOME/hamlib-prefix \
--disable-shared --enable-static \
--without-cxx-binding --disable-winradio \
CFLAGS="-g -O2 -fdata-sections -ffunction-sections" \
LDFLAGS="-Wl,--gc-sections"
$ make
$ make install-strip
This will build a binary hamlib package located at ~/hamlib-prefix so
you will need to add that to your CMAKE_PREFIX_PATH variable in your
WSJT-X build. On Linux that is probably the only path you have on
CMAKE_PREFIX_PATH unless you are using a locally installed Qt
installation.
To get the sources either download and extract a source tarball from
the project web site or preferably fetch the sources directly from the
project's subversion repository.
$ mkdir -p ~/wsjtx-prefix/build
$ cd ~/wsjtx-prefix
$ git clone git://git.code.sf.net/p/wsjt/wsjtx src
To build WSJT-X you will need CMake and asciidoc installed.
$ cd ~/wsjtx-prefix/build
$ cmake -D CMAKE_PREFIX_PATH=~/hamlib-prefix ../src
$ cmake --build .
$ cmake --build . --target install
The recipe above will install into /usr by default, if you wish to
install in you own directory you can add a prefix-path to the
configure step like:
$ cd ~/wsjtx-prefix/build
$ cmake -D CMAKE_PREFIX_PATH=~/hamlib-prefix \
-D CMAKE_INSTALL_PREFIX=~/wsjtx-prefix ../src
$ cmake --build .
$ cmake --build . --target install
this will install WSJT-X at ~/wsjtx-prefix.
Building from Source on MS Windows
==================================
Because building on MS Windows is quite complicated there is an
Software Development Kit available that provides all the prerequisite
libraries and tools for building WSJT-X. This SDK is called JT-SDK-QT
which is documented here:
http://physics.princeton.edu/pulsar/K1JT/wsjtx-doc/dev-guide-main.html
If you need to build Hamlib rather than use the Hamlib kit included in
the JT-SDK the following recipe should help. Reasons for building
Hamlib from source might include picking up the very latest patches or
building a different branch that you wish to contribute to.
Hamlib optionally depends upon libusb-1.0, see "Building from Source"
above for more details. If you wish to include support for the
optional custom USB Hamlib rig drivers then you must install
libusb-1.0 before building Hamlib. The package may be obtained from
http://libusb.info/, install it in a convenient location like
C:\Tools.
On Windows there is a complication in that the compilers used to build
Qt and WSJT-X are the MinGW ones bundled with the Qt package but
Hamlib needs to be build from an MSYS shell with the tools required to
build an autotools project. This means that you need to tell the
Hamlib configuration to use the Qt bundled MinGW compilers (if you
don't then the thread support library use by Hamlib will be
incompatible with that used by Qt and WSJT-X). So on Windows the
Hamlib build recipe is something like:
In an MSYS shell:-
$ mkdir ~/hamib-prefix
$ cd ~/hamlib-prefix
$ git clone git://git.code.sf.net/u/bsomervi/hamlib src
$ cd src
$ git checkout integration
$ ./bootstrap
$ mkdir ../build
$ cd ../build
../src/configure --prefix=$HOME/hamlib-prefix \
--disable-shared --enable-static \
--without-cxx-binding --disable-winradio \
CC=<path-to-Qt-MinGW-tools>/gcc \
CXX=<path-to-Qt-MinGW-tools>/g++ \
CFLAGS="-g -O2 -fdata-sections -ffunction-sections -I<path-to-libusb-1.0>/include" \
LDFLAGS="-Wl,--gc-sections" \
LIBUSB_LIBS="-L<path-to-libusb-1.0>/MinGW32/dll -lusb-1.0"
$ make
$ make install
NOTE: <path-to-Qt-MinGQ-tools> should be substituted with the actual
path to your Qt bundled tools e.g on my system it is
C:\Tools\Qt\Tools\mingw530_32\bin
NOTE: <path-to-libusb-1.0> should be substituted with the actual path
to your libusb-1.0 installation directory e.g. on my system it is
C:\Tools\libusb-1.0.20
This will leave a Hamlib binary package installed at
c:/Users/<user-name>/hamlib-prefix which is what needs to be on your
CMAKE_PREFIX_PATH. On Windows you almost certainly will be using a
CMake tool chain file and this is where you will need to specify the
Hamlib binary location as one of the paths in CMAKE_PREFIX_PATH.
Building from Source on Apple Mac
=================================
These instructions are adapted from my Evernote page at:
https://www.evernote.com/pub/bsomervi/wsjt-xmacbuilds
There are several ways to get the required GNU and other open source
tools and libraries installed, my preference is MacPorts because it is
easy to use and does everything we need.
You will need Xcode, MacPorts, CMake and, Qt. The Xcode install
instructions are included in the MacPorts documentation.
MacPorts
--------
Install MacPorts from instructions here:
http://www.macports.org/install.php
More detailed instructions are available in the documentation:
https://guide.macports.org
The ports that need to be installed are:
autoconf
automake
libtool
pkgconfig
texinfo
gcc5
fftw-3-single +gcc5
asciidoc
libusb-devel
These are installed by typing:
$ sudo port install autoconf automake \
libtool pkgconfig texinfo gcc5 asciidoc \
fftw-3-single +gcc5 libusb-devel
Once complete you should have all the tools required to build WSJT-X.
Uninstalling MacPorts
---------------------
If at some point you wish to remove the ports from your machine. The
instructions are here:
https://guide.macports.org/#installing.macports.uninstalling .
Hamlib
------
First fetch hamlib from the repository, in this case my fork of Hamlib
3 until the official repository has all the fixes we need:
$ mkdir -p ~/hamlib-prefix/build
$ cd ~/hamlib-prefix
$ git clone git://git.code.sf.net/u/bsomervi/hamlib src
$ cd src
$ git checkout integration
$ ./bootstrap
The integration branch is my system testing branch which has all my
latest published changes.
To build:
$ cd ~/hamlib-prefix/build
$ ../src/configure \
--enable-static \
--disable-shared \
--disable-winradio \
--prefix=$HOME/hamlib-prefix \
CFLAGS="-g -O2 -mmacosx-version-min=10.7 -I/opt/local/include" \
LIBUSB_LIBS="-L/opt/local/lib -lusb-1.0"
$ make
$ make install-strip
The above commands will build hamlib and install it into
~/hamlib-prefix. If `make install-strip` fails, try `make install`.
CMake
-----
Although CMake is available via MacPorts I prefer to use the binary
installer from cake.org as the MacPorts port doesn't include the
graphical CMake tool cmake-gui which I find quite useful.
Fetch the latest CMake universal 64-bit DMG from
http://www.cmake.org/download/ open the DMG then drag and drop the
application bundle onto the supplied /Applications link.
To complete the install process you need to run the CMake-gui
application as root from a terminal shell as follows:
$ sudo "/Applications/CMake.app/Contents/MacOS/cmake" --install
that installs the CMake command line tools which you can verify by
typing into a terminal window:
$ cmake --version
If the install command above fails with a "No such file or directory"
error, that probably means that /usr/local/bin does not exist. You can
create it correctly with the following commands:
$ sudo mkdir -p /usr/local/bin
$ sudo chmod 755 /usr/local/bin
$ sudo chgrp wheel /usr/local/bin
and then retry the install command.
Qt
--
Download the latest on-line installer package from the Qt web site and
isntall the latest Qt stable version development package.
WSJT-X
------
First fetch the source from the repository:
$ mkdir -p ~/wsjtx-prefix/build
$ cd ~/wsjtx-prefix
$ git clone git://git.code.sf.net/p/wsjt/wsjtx src
this links to the Subversion repository in a read-only fashion, if you
intend to contribute to the project then you probably want to get a
developer login and use a read-write checkout. Even if you don't it
can be upgraded at a later date.
The checkout is of the latest code on the project trunk, i.e. the
development branch. You can easily switch the checkout to another
branch or even a tag if you want to build a prior published
generation. For now we will build the latest development sources. To
configure:
$ cd ~/wsjtx-prefix/build
$ FC=gfortran-mp-5 \
cmake \
-D CMAKE_PREFIX_PATH="~/Qt/5.7/clang_64;~/hamlib-prefix;/opt/local" \
-D CMAKE_INSTALL_PREFIX=~/wsjtx-prefix \
-D CMAKE_OSX_SYSROOT=/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.11.sdk \
~/wsjtx-prefix/src
Substitute the Mac OS X SDK version you have installed in the above
command if you have a different version from 10.11.
The CMAKE_PREFIX_PATH variable specifies where CMake should look first
for other packages, the two elements may be different depending where
you have installed Qt and what version you have (~/local/qt-macx-clang
if you have built Qt from sources as described above in the Qt
section) and where you installed Hamlib (i.e. the --prefix configure
option above in the Hamlib section).
If you already have the fftw3-dev package installed on your system it
may well get selected in preference to the one you built above in the
MacPorts installation. It is unlikely that a prior installation of
libfftw3f is correctly configured for use in a WSJT-X package, the
CMAKE_PREFIX_PATH above is augmented with the MacPorts installation
location (/opt/local) to ensure the correct libfftw3f.dylib and
headers are located.
To build:
$ cmake --build .
$ cmake --build . --target install
which installs the WSJT-X application bundle into ~/wsjtx-prefix
Updating and Rebuilding Hamlib
==============================
From time to time new fixes will be pushed to the Hamlib fork
repository integration branch. To pick them up type:
$ cd ~/hamlib-prefix/src
$ git pull
To rebuild hamlib with the changed sources:
$ cd ~/hamlib-prefix/build
$ make
$ make install-strip
Updating and Rebuilding WSJT-X
==============================
To update to the latest sources type:
$ cd ~/wsjtx-prefix/src
$ git pull
$ cd ~/wsjtx-prefix/build
$ cmake --build .
$ cmake --build . --target install
73
Bill
G4WJS.