w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2024-11-16 00:51:56 -05:00
Code Issues Packages Projects Releases Wiki Activity
092a2301a0
WSJT-X/OmniRigTransceiver.cpp
Bill Somerville 2cfbb15b4f Rig control overhaul to implement generic Doppler shift tracking 
The  concept of  a nominal  receive  and transmit  frequency has  been
introduced. This is  used as a base frequency  for Doppler correction,
frequency setting  and reporting. The  start up frequency is  now zero
which is  updated by the first  rig control status report.  This needs
more  work to  accommodate  calling frequency  plus working  frequency
operation as is used for random MS operation etc..

The  main  window  frequency  display  now  shows  the  transmit  dial
frequency while transmitting.

The mode changing logic sequence has been changed such that the rig is
correctly put  into and  taken out  of split mode  as required  by the
target mode.  This also  avoids the "other"  VFO having  its frequency
changed when  entering a mode that  does not use split  operating like
WSPR.

The main window  band combo box edit  may now be used to  input an kHz
offset  from the  current MHz  dial  frequency. This  is intended  for
setting  a sked  or working  frequency on  the VHF  and up  bands. For
example the working frequency for 23cms  might be set to 1296MHz and a
working  frequency of  1296.3MHz would  be selected  by selecting  the
23cms band  with the combo box  drop down list and  then entering 300k
into the band combo box edit widget.

When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal
frequency such  that the frequency  clicked on  becomes the Tx  and Rx
frequency using  the fixed 1000Hz  DF that  JT4 modes use.   This will
probably be extended to all QSO modes when used in VHF & up mode. This
assumes that 1000Hz is an optimal DF  for both Tx and Rx and therefore
one  can "net"  to an  off frequency,  but visible  on the  waterfall,
caller with one click.

Improvements to OmniRig  rig control including use of  the serial port
control lines RTS or DTR, on the  CAT serial port used by OmniRig, for
PTT control.

Incrementing transaction sequence numbers added to messages to and from
the rig control  thread. This enables round trip status  to be tracked
and associated with a request. For  example a command that might cause
several  asynchronous  status  updates  can  now  be  tracked  in  the
originating thread such  that it is clear which updates  are caused by
executing the  request. This in turn  allows updates to be  held until
the request is complete i.e. the  state is consistent with the results
of the request.

Messages  to the  rig control  thread are  now posted  as a  new state
(Transceiver::TransceiverState) object. The  rig control thread tracks
requests and  actions any differences  between the prior  requests and
the new state.

The rig  control thread is now  stored on the  heap so that it  can be
closed down  and released as needed.  Along with this the  rig control
close  down  semantics  are  better defined  avoiding  some  potential
deadlock situations.

If the rig  is placed into split  mode it will be  reverted to simplex
mode when the rig connection is closed.

When  using direct  rig control  via Hamlib,  rigs that  have A/B  VFO
arrangements and  no method to query  the current VFO like  many Icoms
and  the Yaesu  FT-817/857/897(D)  series now  have smarted  frequency
updating requiring no  VFO changes when changing  the frequency.  This
is particularly  important when doing  Tx Doppler correction  to avoid
glitches.

The implementation  of emulated  split operating  mode ("Fake  It") is
simplified and improved.

A dummy  Hamlib transceiver for PTT  control on a separate  port is no
long instantiated if CAT or VOX PTT control is selected.

The resolution and  any rounding of the rig CAT  frequency set and get
commands is determined automatically  upon opening the rig connection.
This is needed to determine the  rate of frequency updates for Doppler
tracking. It also allows the rig to be more accurately controlled.

Frequency  calibration is  calculated separately  for the  receive and
transmit frequencies.

Whether  the  rig  modulation  mode  should be  controlled  is  now  a
constructor  argument rather  than  being passed  with individual  rig
control requests.

Doppler  shift  correction  is   considerably  enhanced  with  simpler
controls and much  better rig control.  A new mode  of tracking called
"receive only" is introduced for those with rigs that cannot be QSY:ed
via  CAT  when transmitting.   Such  rigs  have a  Doppler  correction
calculated  for the  middle of  the next  transmit period  just before
transmission starts. While  using Doppler tracking it  is now possible
to adjust the  sked frequency either using the new  kHz offset feature
of the main  window band combo box  or by directly tuning  the rig VFO
knob while holding down the CTRL key.

The astronomical data window that includes Doppler tracking control is
now opened  and closed using a  checkable menu item to  avoid it being
accidentally closed.

Debug  configuration  rig  control  diagnostic  messages  now  have  a
facility argument for clearer and more standardized trace messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00

644 lines
19 KiB
C++
Raw Blame History

#include "OmniRigTransceiver.hpp"
#include <QTimer>
#include <QDebug>
#include <objbase.h>
#include <QThread>
#include "qt_helpers.hpP"
#include "moc_OmniRigTransceiver.cpp"
namespace
{
auto constexpr OmniRig_transceiver_one_name = "OmniRig Rig 1";
auto constexpr OmniRig_transceiver_two_name = "OmniRig Rig 2";
}
auto OmniRigTransceiver::map_mode (OmniRig::RigParamX param) -> MODE
{
if (param & OmniRig::PM_CW_U)
{
return CW_R;
}
else if (param & OmniRig::PM_CW_L)
{
return CW;
}
else if (param & OmniRig::PM_SSB_U)
{
return USB;
}
else if (param & OmniRig::PM_SSB_L)
{
return LSB;
}
else if (param & OmniRig::PM_DIG_U)
{
return DIG_U;
}
else if (param & OmniRig::PM_DIG_L)
{
return DIG_L;
}
else if (param & OmniRig::PM_AM)
{
return AM;
}
else if (param & OmniRig::PM_FM)
{
return FM;
}
TRACE_CAT ("OmniRigTransceiver", "unrecognized mode");
throw_qstring (tr ("OmniRig: unrecognized mode"));
return UNK;
}
OmniRig::RigParamX OmniRigTransceiver::map_mode (MODE mode)
{
switch (mode)
{
case AM: return OmniRig::PM_AM;
case CW: return OmniRig::PM_CW_L;
case CW_R: return OmniRig::PM_CW_U;
case USB: return OmniRig::PM_SSB_U;
case LSB: return OmniRig::PM_SSB_L;
case FSK: return OmniRig::PM_DIG_L;
case FSK_R: return OmniRig::PM_DIG_U;
case DIG_L: return OmniRig::PM_DIG_L;
case DIG_U: return OmniRig::PM_DIG_U;
case FM: return OmniRig::PM_FM;
case DIG_FM: return OmniRig::PM_FM;
default: break;
}
return OmniRig::PM_SSB_U; // quieten compiler grumble
}
void OmniRigTransceiver::register_transceivers (TransceiverFactory::Transceivers * registry, int id1, int id2)
{
(*registry)[OmniRig_transceiver_one_name] = TransceiverFactory::Capabilities {
id1
, TransceiverFactory::Capabilities::none // COM isn't serial or network
, true // does PTT
, false // doesn't select mic/data (use OmniRig config file)
, true // can remote control RTS nd DTR
, true // asynchronous interface
};
(*registry)[OmniRig_transceiver_two_name] = TransceiverFactory::Capabilities {
id2
, TransceiverFactory::Capabilities::none // COM isn't serial or network
, true // does PTT
, false // doesn't select mic/data (use OmniRig config file)
, true // can remote control RTS nd DTR
, true // asynchronous interface
};
}
OmniRigTransceiver::OmniRigTransceiver (std::unique_ptr<TransceiverBase> wrapped,
RigNumber n, TransceiverFactory::PTTMethod ptt_type,
QString const& ptt_port, QObject * parent)
: TransceiverBase {parent}
, wrapped_ {std::move (wrapped)}
, use_for_ptt_ {TransceiverFactory::PTT_method_CAT == ptt_type || ("CAT" == ptt_port && (TransceiverFactory::PTT_method_RTS == ptt_type || TransceiverFactory::PTT_method_DTR == ptt_type))}
, ptt_type_ {ptt_type}
, rig_number_ {n}
, readable_params_ {0}
, writable_params_ {0}
, send_update_signal_ {false}
, reversed_ {false}
{
}
int OmniRigTransceiver::do_start ()
{
TRACE_CAT ("OmniRigTransceiver", "starting");
if (wrapped_) wrapped_->start (0);
CoInitializeEx (nullptr, 0 /*COINIT_APARTMENTTHREADED*/); // required because Qt only does this for GUI thread
omni_rig_.reset (new OmniRig::OmniRigX {this});
if (omni_rig_->isNull ())
{
TRACE_CAT ("OmniRigTransceiver", "failed to start COM server");
throw_qstring (tr ("Failed to start OmniRig COM server"));
}
// COM/OLE exceptions get signalled
connect (&*omni_rig_, SIGNAL (exception (int, QString, QString, QString)), this, SLOT (handle_COM_exception (int, QString, QString, QString)));
// IOmniRigXEvent interface signals
connect (&*omni_rig_, SIGNAL (VisibleChange ()), this, SLOT (handle_visible_change ()));
connect (&*omni_rig_, SIGNAL (RigTypeChange (int)), this, SLOT (handle_rig_type_change (int)));
connect (&*omni_rig_, SIGNAL (StatusChange (int)), this, SLOT (handle_status_change (int)));
connect (&*omni_rig_, SIGNAL (ParamsChange (int, int)), this, SLOT (handle_params_change (int, int)));
connect (&*omni_rig_
, SIGNAL (CustomReply (int, QVariant const&, QVariant const&))
, this, SLOT (handle_custom_reply (int, QVariant const&, QVariant const&)));
TRACE_CAT ("OmniRigTransceiver", "OmniRig s/w version:" << QString::number (omni_rig_->SoftwareVersion ()).toLocal8Bit ()
<< "i/f version:" << QString::number (omni_rig_->InterfaceVersion ()).toLocal8Bit ());
// fetch the interface of the RigX CoClass and instantiate a proxy object
switch (rig_number_)
{
case One: rig_.reset (new OmniRig::RigX (omni_rig_->Rig1 ())); break;
case Two: rig_.reset (new OmniRig::RigX (omni_rig_->Rig2 ())); break;
}
Q_ASSERT (rig_);
Q_ASSERT (!rig_->isNull ());
if (use_for_ptt_ && (TransceiverFactory::PTT_method_DTR == ptt_type_ || TransceiverFactory::PTT_method_RTS == ptt_type_))
{
// fetch the interface for the serial port if we need it for PTT
port_.reset (new OmniRig::PortBits (rig_->PortBits ()));
Q_ASSERT (port_);
Q_ASSERT (!port_->isNull ());
TRACE_CAT ("OmniRigTransceiver", "OmniRig RTS state:" << port_->Rts ());
if (!port_->Lock ()) // try to take exclusive use of the OmniRig serial port for PTT
{
TRACE_CAT ("OmniRigTransceiver", "Failed to get exclusive use of serial port for PTT from OmniRig");
}
// start off so we don't accidentally key the radio
if (TransceiverFactory::PTT_method_DTR == ptt_type_)
{
port_->SetDtr (false);
}
else // RTS
{
port_->SetRts (false);
}
}
readable_params_ = rig_->ReadableParams ();
writable_params_ = rig_->WriteableParams ();
TRACE_CAT ("OmniRigTransceiver", QString {"OmniRig initial rig type: %1 readable params = 0x%2 writable params = 0x%3 for rig %4"}
.arg (rig_->RigType ())
.arg (readable_params_, 8, 16, QChar ('0'))
.arg (writable_params_, 8, 16, QChar ('0'))
.arg (rig_number_).toLocal8Bit ());
for (unsigned tries {0}; tries < 10; ++tries)
{
QThread::msleep (100); // wait until OmniRig polls the rig
auto f = rig_->GetRxFrequency ();
int resolution {0};
if (f)
{
if (f % 10) return resolution; // 1Hz resolution
auto test_frequency = f - f % 100 + 55;
if (OmniRig::PM_FREQ & writable_params_)
{
rig_->SetFreq (test_frequency);
}
else if (reversed_ && (OmniRig::PM_FREQB & writable_params_))
{
rig_->SetFreqB (test_frequency);
}
else if (!reversed_ && (OmniRig::PM_FREQA & writable_params_))
{
rig_->SetFreqA (test_frequency);
}
else
{
throw_qstring (tr ("OmniRig: don't know how to set rig frequency"));
}
switch (rig_->GetRxFrequency () - test_frequency)
{
case -5: resolution = -1; break; // 10Hz truncated
case 5: resolution = 1; break; // 10Hz rounded
case -55: resolution = -2; break; // 100Hz truncated
case 45: resolution = 2; break; // 100Hz rounded
}
if (OmniRig::PM_FREQ & writable_params_)
{
rig_->SetFreq (f);
}
else if (reversed_ && (OmniRig::PM_FREQB & writable_params_))
{
rig_->SetFreqB (f);
}
else if (!reversed_ && (OmniRig::PM_FREQA & writable_params_))
{
rig_->SetFreqA (f);
}
update_rx_frequency (f);
return resolution;
}
}
throw_qstring (tr ("OmniRig: Initialization timed out"));
return 0; // keep compiler happy
}
void OmniRigTransceiver::do_stop ()
{
QThread::msleep (200); // leave some time for pending
// commands at the server end
if (port_)
{
port_->Unlock (); // release serial port
port_->clear ();
}
if (rig_) rig_->clear ();
if (omni_rig_) omni_rig_->clear ();
CoUninitialize ();
if (wrapped_) wrapped_->stop ();
TRACE_CAT ("OmniRigTransceiver", "stopped");
}
void OmniRigTransceiver::do_sync (bool force_signal, bool /*no_poll*/)
{
// nothing much we can do here, we just have to let OmniRig do its
// stuff and its first poll should send us and update that will
// trigger a update signal from us. Any attempt to query OmniRig
// leads to a whole mess of trouble since its internal state is
// garbage until it has done its first rig poll.
send_update_signal_ = force_signal;
update_complete ();
}
void OmniRigTransceiver::handle_COM_exception (int code, QString source, QString desc, QString help)
{
TRACE_CAT ("OmniRigTransceiver", QString::number (code) + " at " + source + ": " + desc + " (" + help + ')');
throw_qstring (tr ("OmniRig COM/OLE error: %1 at %2: %3 (%4)").arg (QString::number (code)).arg (source). arg (desc). arg (help));
}
void OmniRigTransceiver::handle_visible_change ()
{
TRACE_CAT ("OmniRigTransceiver", "visibility change: visibility =" << omni_rig_->DialogVisible ());
}
void OmniRigTransceiver::handle_rig_type_change (int rig_number)
{
if (rig_number_ == rig_number)
{
readable_params_ = rig_->ReadableParams ();
writable_params_ = rig_->WriteableParams ();
TRACE_CAT ("OmniRigTransceiver", QString {"OmniRig rig type change to: %1 readable params = 0x%2 writable params = 0x%3 for rig %4"}
.arg (rig_->RigType ())
.arg (readable_params_, 8, 16, QChar ('0'))
.arg (writable_params_, 8, 16, QChar ('0'))
.arg (rig_number).toLocal8Bit ());
offline ("OmniRig rig changed");
}
}
void OmniRigTransceiver::handle_status_change (int rig_number)
{
if (rig_number_ == rig_number)
{
TRACE_CAT ("OmniRigTransceiver", QString {"OmniRig status change: new status for rig %1 = "}.arg (rig_number).toLocal8Bit () << rig_->StatusStr ().toLocal8Bit ());
if (OmniRig::ST_ONLINE != rig_->Status ())
{
QTimer::singleShot (5000, this, SLOT (online_check ()));
}
else
{
TRACE_CAT ("OmniRigTransceiver", "OmniRig frequency:" << rig_->GetRxFrequency ());
}
}
}
void OmniRigTransceiver::handle_params_change (int rig_number, int params)
{
if (rig_number_ == rig_number)
{
TRACE_CAT ("OmniRigTransceiver", QString {"OmniRig params change: params = 0x%1 for rig %2"}
.arg (params, 8, 16, QChar ('0'))
.arg (rig_number).toLocal8Bit ()
<< "state before:" << state ());
// starting_ = false;
TransceiverState old_state {state ()};
auto need_frequency = false;
// state_.online = true; // sometimes we don't get an initial
// // OmniRig::ST_ONLINE status change
// // event
if (params & OmniRig::PM_VFOAA)
{
update_split (false);
reversed_ = false;
update_rx_frequency (rig_->FreqA ());
update_other_frequency (rig_->FreqB ());
}
if (params & OmniRig::PM_VFOAB)
{
update_split (true);
reversed_ = false;
update_rx_frequency (rig_->FreqA ());
update_other_frequency (rig_->FreqB ());
}
if (params & OmniRig::PM_VFOBA)
{
update_split (true);
reversed_ = true;
update_other_frequency (rig_->FreqA ());
update_rx_frequency (rig_->FreqB ());
}
if (params & OmniRig::PM_VFOBB)
{
update_split (false);
reversed_ = true;
update_other_frequency (rig_->FreqA ());
update_rx_frequency (rig_->FreqB ());
}
if (params & OmniRig::PM_VFOA)
{
reversed_ = false;
need_frequency = true;
}
if (params & OmniRig::PM_VFOB)
{
reversed_ = true;
need_frequency = true;
}
if (params & OmniRig::PM_FREQ)
{
need_frequency = true;
}
if (params & OmniRig::PM_FREQA)
{
if (reversed_)
{
update_other_frequency (rig_->FreqA ());
}
else
{
update_rx_frequency (rig_->FreqA ());
}
}
if (params & OmniRig::PM_FREQB)
{
if (reversed_)
{
update_rx_frequency (rig_->FreqB ());
}
else
{
update_other_frequency (rig_->FreqB ());
}
}
if (need_frequency)
{
if (readable_params_ & OmniRig::PM_FREQA)
{
if (reversed_)
{
update_other_frequency (rig_->FreqA ());
}
else
{
update_rx_frequency (rig_->FreqA ());
}
need_frequency = false;
}
if (readable_params_ & OmniRig::PM_FREQB)
{
if (reversed_)
{
update_rx_frequency (rig_->FreqB ());
}
else
{
update_other_frequency (rig_->FreqB ());
}
}
}
if (need_frequency && (readable_params_ & OmniRig::PM_FREQ))
{
update_rx_frequency (rig_->Freq ());
}
if (params & OmniRig::PM_PITCH)
{
}
if (params & OmniRig::PM_RITOFFSET)
{
}
if (params & OmniRig::PM_RIT0)
{
}
if (params & OmniRig::PM_VFOEQUAL)
{
auto f = readable_params_ & OmniRig::PM_FREQA ? rig_->FreqA () : rig_->Freq ();
update_rx_frequency (f);
update_other_frequency (f);
update_mode (map_mode (rig_->Mode ()));
}
if (params & OmniRig::PM_VFOSWAP)
{
auto temp = state ().tx_frequency ();
update_other_frequency (state ().frequency ());
update_rx_frequency (temp);
update_mode (map_mode (rig_->Mode ()));
}
if (params & OmniRig::PM_SPLITON)
{
update_split (true);
}
if (params & OmniRig::PM_SPLITOFF)
{
update_split (false);
}
if (params & OmniRig::PM_RITON)
{
}
if (params & OmniRig::PM_RITOFF)
{
}
if (params & OmniRig::PM_XITON)
{
}
if (params & OmniRig::PM_XITOFF)
{
}
if (params & OmniRig::PM_RX)
{
update_PTT (false);
}
if (params & OmniRig::PM_TX)
{
update_PTT ();
}
if (params & OmniRig::PM_CW_U)
{
update_mode (CW_R);
}
if (params & OmniRig::PM_CW_L)
{
update_mode (CW);
}
if (params & OmniRig::PM_SSB_U)
{
update_mode (USB);
}
if (params & OmniRig::PM_SSB_L)
{
update_mode (LSB);
}
if (params & OmniRig::PM_DIG_U)
{
update_mode (DIG_U);
}
if (params & OmniRig::PM_DIG_L)
{
update_mode (DIG_L);
}
if (params & OmniRig::PM_AM)
{
update_mode (AM);
}
if (params & OmniRig::PM_FM)
{
update_mode (FM);
}
if (old_state != state () || send_update_signal_)
{
update_complete ();
send_update_signal_ = false;
}
TRACE_CAT ("OmniRigTransceiver", "OmniRig params change: state after:" << state ());
}
}
void OmniRigTransceiver::handle_custom_reply (int rig_number, QVariant const& command, QVariant const& reply)
{
(void)command;
(void)reply;
if (rig_number_ == rig_number)
{
TRACE_CAT ("OmniRigTransceiver", "custom command" << command.toString ().toLocal8Bit ()
<< "with reply" << reply.toString ().toLocal8Bit ()
<< QString ("for rig %1").arg (rig_number).toLocal8Bit ());
TRACE_CAT ("OmniRigTransceiver", "rig number:" << rig_number_ << ':' << state ());
}
}
void OmniRigTransceiver::do_ptt (bool on)
{
TRACE_CAT ("OmniRigTransceiver", on << state ());
if (use_for_ptt_ && TransceiverFactory::PTT_method_CAT == ptt_type_)
{
TRACE_CAT ("OmniRigTransceiver", "set PTT");
rig_->SetTx (on ? OmniRig::PM_TX : OmniRig::PM_RX);
}
else
{
if (port_)
{
if (TransceiverFactory::PTT_method_RTS == ptt_type_)
{
TRACE_CAT ("OmniRigTransceiver", "set RTS");
port_->SetRts (on);
}
else // "DTR"
{
TRACE_CAT ("OmniRigTransceiver", "set DTR");
port_->SetDtr (on);
}
}
else
{
TRACE_CAT ("OmniRigTransceiver", "set PTT using basic transceiver");
Q_ASSERT (wrapped_);
TransceiverState new_state {wrapped_->state ()};
new_state.ptt (on);
wrapped_->set (new_state, 0);
}
if (state ().ptt () != on)
{
update_PTT (on);
// no need for this as currently update_PTT() does it for us
// update_complete ();
}
}
}
void OmniRigTransceiver::do_frequency (Frequency f, MODE m, bool /*no_ignore*/)
{
TRACE_CAT ("OmniRigTransceiver", f << state ());
if (UNK != m)
{
do_mode (m);
}
if (OmniRig::PM_FREQ & writable_params_)
{
rig_->SetFreq (f);
update_rx_frequency (f);
}
else if (reversed_ && (OmniRig::PM_FREQB & writable_params_))
{
rig_->SetFreqB (f);
update_rx_frequency (f);
}
else if (!reversed_ && (OmniRig::PM_FREQA & writable_params_))
{
rig_->SetFreqA (f);
update_rx_frequency (f);
}
else
{
throw_qstring (tr ("OmniRig: don't know how to set rig frequency"));
}
}
void OmniRigTransceiver::do_tx_frequency (Frequency tx, bool /*no_ignore*/)
{
TRACE_CAT ("OmniRigTransceiver", tx << state ());
bool split {tx != 0};
if (split)
{
TRACE_CAT ("OmniRigTransceiver", "set SPLIT mode on");
rig_->SetSplitMode (state ().frequency (), tx);
update_other_frequency (tx);
update_split (true);
}
else
{
TRACE_CAT ("OmniRigTransceiver", "set SPLIT mode off");
rig_->SetSimplexMode (state ().frequency ());
update_split (false);
}
bool notify {false};
if (readable_params_ & OmniRig::PM_FREQ || !(readable_params_ & (OmniRig::PM_FREQA | OmniRig::PM_FREQB)))
{
update_other_frequency (tx); // async updates won't return this
// so just store it and hope
// operator doesn't change the
// "back" VFO on rig
notify = true;
}
if (!((OmniRig::PM_VFOAB | OmniRig::PM_VFOBA | OmniRig::PM_SPLITON) & readable_params_))
{
TRACE_CAT ("OmniRigTransceiver", "setting SPLIT manually");
update_split (split); // we can't read it so just set and
// hope op doesn't change it
notify = true;
}
if (notify)
{
update_complete ();
}
}
void OmniRigTransceiver::do_mode (MODE mode)
{
TRACE_CAT ("OmniRigTransceiver", mode << state ());
// TODO: G4WJS OmniRig doesn't seem to have any capability of tracking/setting VFO B mode
auto mapped = map_mode (mode);
if (mapped & writable_params_)
{
rig_->SetMode (mapped);
update_mode (mode);
}
else
{
offline ("OmniRig invalid mode");
}
}
Reference in New Issue View Git Blame Copy Permalink