WSJT-X/mainwindow.cpp
Bill Somerville 2beef948d9 Adaptive sample block size to match FFT sizes
This  change  corrects timing  discrepancies  on  the horizontal  fast
spectrum plot.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-17 01:27:00 +00:00

5546 lines
184 KiB
C++

//-------------------------------------------------------- MainWindow
#include "mainwindow.h"
#include <cinttypes>
#include <limits>
#include <functional>
#include <fftw3.h>
#include <QLineEdit>
#include <QRegExpValidator>
#include <QRegExp>
#include <QDesktopServices>
#include <QUrl>
#include <QStandardPaths>
#include <QDir>
#include <QDebug>
#include <QtConcurrent/QtConcurrentRun>
#include <QProgressDialog>
#include <QHostInfo>
#include <QVector>
#include <QCursor>
#include <QToolTip>
#include <QAction>
#include <QActionGroup>
#include "revision_utils.hpp"
#include "qt_helpers.hpp"
#include "soundout.h"
#include "soundin.h"
#include "Modulator.hpp"
#include "Detector.hpp"
#include "plotter.h"
#include "echoplot.h"
#include "echograph.h"
#include "fastplot.h"
#include "fastgraph.h"
#include "about.h"
#include "messageaveraging.h"
#include "widegraph.h"
#include "sleep.h"
#include "logqso.h"
#include "Radio.hpp"
#include "Bands.hpp"
#include "TransceiverFactory.hpp"
#include "FrequencyList.hpp"
#include "StationList.hpp"
#include "LiveFrequencyValidator.hpp"
#include "MessageClient.hpp"
#include "wsprnet.h"
#include "signalmeter.h"
#include "HelpTextWindow.hpp"
#include "SampleDownloader.hpp"
#include "Audio/BWFFile.hpp"
#include "MultiSettings.hpp"
#include "ui_mainwindow.h"
#include "moc_mainwindow.cpp"
extern "C" {
//----------------------------------------------------- C and Fortran routines
void symspec_(struct dec_data *, int* k, int* ntrperiod, int* nsps, int* ingain, int* minw,
float* px, float s[], float* df3, int* nhsym, int* npts8);
void hspec_(short int d2[], int* k, int* ingain, float green[], float s[], int* jh);
void gen4_(char* msg, int* ichk, char* msgsent, int itone[],
int* itext, int len1, int len2);
void gen9_(char* msg, int* ichk, char* msgsent, int itone[],
int* itext, int len1, int len2);
void genmsk_(char* msg, int* ichk, char* msgsent, int itone[],
int* itext, int len1, int len2);
void genmsk144_(char* msg, int* ichk, char* msgsent, int itone[],
int* itext, char pchkFile[], int len1, int len2, int len3);
void gen65_(char* msg, int* ichk, char* msgsent, int itone[],
int* itext, int len1, int len2);
void genwspr_(char* msg, char* msgsent, int itone[], int len1, int len2);
void geniscat_(char* msg, char* msgsent, int itone[], int len1, int len2);
bool stdmsg_(const char* msg, int len);
void azdist_(char* MyGrid, char* HisGrid, double* utch, int* nAz, int* nEl,
int* nDmiles, int* nDkm, int* nHotAz, int* nHotABetter,
int len1, int len2);
void morse_(char* msg, int* icw, int* ncw, int len);
int ptt_(int nport, int ntx, int* iptt, int* nopen);
void wspr_downsample_(short int d2[], int* k);
void savec2_(char* fname, int* TR_seconds, double* dial_freq, int len1);
void avecho_( short id2[], int* dop, int* nfrit, int* nqual, float* f1,
float* level, float* sigdb, float* snr, float* dfreq,
float* width);
void fast_decode_(short id2[], int narg[], char msg[], char pchkFile[],
int len1, int len2);
void hash_calls_(char calls[], int* ih9, int len);
void degrade_snr_(short d2[], int* n, float* db, float* bandwidth);
void wav12_(short d2[], short d1[], int* nbytes, short* nbitsam2);
void refspectrum_(short int d2[], bool* brefspec, bool* buseref,
const char* c_fname, int len);
}
int volatile itone[NUM_ISCAT_SYMBOLS]; //Audio tones for all Tx symbols
int volatile icw[NUM_CW_SYMBOLS]; //Dits for CW ID
struct dec_data dec_data; // for sharing with Fortran
int outBufSize;
int rc;
qint32 g_iptt {0};
wchar_t buffer[256];
float fast_green[703];
float fast_green2[703];
float fast_s[44992]; //44992=64*703
float fast_s2[44992];
int fast_jh {0};
int fast_jh2 {0};
int narg[15];
QVector<QColor> g_ColorTbl;
bool g_single_decode;
namespace
{
Radio::Frequency constexpr default_frequency {14076000};
QRegExp message_alphabet {"[- @A-Za-z0-9+./?#<>]*"};
bool message_is_73 (int type, QStringList const& msg_parts)
{
return type >= 0
&& ((type < 6 && msg_parts.contains ("73"))
|| (type == 6 && !msg_parts.filter ("73").isEmpty ()));
}
}
//--------------------------------------------------- MainWindow constructor
MainWindow::MainWindow(QDir const& temp_directory, bool multiple,
MultiSettings * multi_settings, QSharedMemory *shdmem,
unsigned downSampleFactor, QNetworkAccessManager * network_manager,
QWidget *parent) :
QMainWindow(parent),
m_valid {true},
m_dataDir {QStandardPaths::writableLocation (QStandardPaths::DataLocation)},
m_revision {revision ()},
m_multiple {multiple},
m_multi_settings {multi_settings},
m_settings {multi_settings->settings ()},
ui(new Ui::MainWindow),
m_config {temp_directory, m_settings, this},
m_WSPR_band_hopping {m_settings, &m_config, this},
m_WSPR_tx_next {false},
m_wideGraph (new WideGraph(m_settings)),
m_echoGraph (new EchoGraph(m_settings)),
m_fastGraph (new FastGraph(m_settings)),
m_logDlg (new LogQSO (program_title (), m_settings, this)),
m_lastDialFreq {0},
m_callingFrequency {0},
m_dialFreqRxWSPR {0},
m_detector {new Detector {RX_SAMPLE_RATE, NTMAX, downSampleFactor}},
m_FFTSize {6192 / 2}, // conservative value to avoid buffer overruns
m_soundInput {new SoundInput},
m_modulator {new Modulator {TX_SAMPLE_RATE, NTMAX}},
m_soundOutput {new SoundOutput},
m_msErase {0},
m_secBandChanged {0},
m_freqNominal {0},
m_freqTxNominal {0},
m_s6 {0.},
m_tRemaining {0.},
m_DTtol {3.0},
m_waterfallAvg {1},
m_ntx {1},
m_XIT {0},
m_sec0 {-1},
m_RxLog {1}, //Write Date and Time to RxLog
m_nutc0 {9999},
m_ntr {0},
m_tx {0},
m_TRperiod {60},
m_inGain {0},
m_secID {0},
m_repeatMsg {0},
m_watchdogLimit {7},
m_nSubMode {0},
m_nclearave {1},
m_pctx {0},
m_nseq {0},
m_nWSPRdecodes {0},
m_k0 {9999999},
m_nPick {0},
m_TRperiodFast {-1},
m_nTx73 {0},
m_freqCQ {0},
m_btxok {false},
m_diskData {false},
m_loopall {false},
m_txFirst {false},
m_auto {false},
m_restart {false},
m_startAnother {false},
m_saveDecoded {false},
m_saveAll {false},
m_widebandDecode {false},
m_dataAvailable {false},
m_blankLine {false},
m_decodedText2 {false},
m_freeText {false},
m_sentFirst73 {false},
m_currentMessageType {-1},
m_lastMessageType {-1},
m_lockTxFreq {false},
m_bShMsgs {false},
m_uploading {false},
m_txNext {false},
m_grid6 {false},
m_tuneup {false},
m_bTxTime {false},
m_rxDone {false},
m_bSimplex {false},
m_bEchoTxOK {false},
m_bTransmittedEcho {false},
m_bEchoTxed {false},
m_bFastDecodeCalled {false},
m_bDoubleClickAfterCQnnn {false},
m_bRefSpec {false},
m_ihsym {0},
m_nzap {0},
m_px {0.0},
m_decodeEarly {false},
m_iptt0 {0},
m_btxok0 {false},
m_nsendingsh {0},
m_onAirFreq0 {0.0},
m_first_error {true},
tx_status_label {new QLabel {"Receiving"}},
mode_label {new QLabel {""}},
last_tx_label {new QLabel {""}},
auto_tx_label {new QLabel {""}},
progressBar {new QProgressBar},
wsprNet {new WSPRNet {network_manager, this}},
m_appDir {QApplication::applicationDirPath ()},
m_palette {"Linrad"},
m_mode {"JT9"},
m_rpt {"-15"},
m_pfx {
"1A", "1S",
"3A", "3B6", "3B8", "3B9", "3C", "3C0", "3D2", "3D2C",
"3D2R", "3DA", "3V", "3W", "3X", "3Y", "3YB", "3YP",
"4J", "4L", "4S", "4U1I", "4U1U", "4W", "4X",
"5A", "5B", "5H", "5N", "5R", "5T", "5U", "5V", "5W", "5X", "5Z",
"6W", "6Y",
"7O", "7P", "7Q", "7X",
"8P", "8Q", "8R",
"9A", "9G", "9H", "9J", "9K", "9L", "9M2", "9M6", "9N",
"9Q", "9U", "9V", "9X", "9Y",
"A2", "A3", "A4", "A5", "A6", "A7", "A9", "AP",
"BS7", "BV", "BV9", "BY",
"C2", "C3", "C5", "C6", "C9", "CE", "CE0X", "CE0Y",
"CE0Z", "CE9", "CM", "CN", "CP", "CT", "CT3", "CU",
"CX", "CY0", "CY9",
"D2", "D4", "D6", "DL", "DU",
"E3", "E4", "E5", "EA", "EA6", "EA8", "EA9", "EI", "EK",
"EL", "EP", "ER", "ES", "ET", "EU", "EX", "EY", "EZ",
"F", "FG", "FH", "FJ", "FK", "FKC", "FM", "FO", "FOA",
"FOC", "FOM", "FP", "FR", "FRG", "FRJ", "FRT", "FT5W",
"FT5X", "FT5Z", "FW", "FY",
"M", "MD", "MI", "MJ", "MM", "MU", "MW",
"H4", "H40", "HA", "HB", "HB0", "HC", "HC8", "HH",
"HI", "HK", "HK0", "HK0M", "HL", "HM", "HP", "HR",
"HS", "HV", "HZ",
"I", "IS", "IS0",
"J2", "J3", "J5", "J6", "J7", "J8", "JA", "JDM",
"JDO", "JT", "JW", "JX", "JY",
"K", "KC4", "KG4", "KH0", "KH1", "KH2", "KH3", "KH4", "KH5",
"KH5K", "KH6", "KH7", "KH8", "KH9", "KL", "KP1", "KP2",
"KP4", "KP5",
"LA", "LU", "LX", "LY", "LZ",
"OA", "OD", "OE", "OH", "OH0", "OJ0", "OK", "OM", "ON",
"OX", "OY", "OZ",
"P2", "P4", "PA", "PJ2", "PJ7", "PY", "PY0F", "PT0S", "PY0T", "PZ",
"R1F", "R1M",
"S0", "S2", "S5", "S7", "S9", "SM", "SP", "ST", "SU",
"SV", "SVA", "SV5", "SV9",
"T2", "T30", "T31", "T32", "T33", "T5", "T7", "T8", "T9", "TA",
"TF", "TG", "TI", "TI9", "TJ", "TK", "TL", "TN", "TR", "TT",
"TU", "TY", "TZ",
"UA", "UA2", "UA9", "UK", "UN", "UR",
"V2", "V3", "V4", "V5", "V6", "V7", "V8", "VE", "VK", "VK0H",
"VK0M", "VK9C", "VK9L", "VK9M", "VK9N", "VK9W", "VK9X", "VP2E",
"VP2M", "VP2V", "VP5", "VP6", "VP6D", "VP8", "VP8G", "VP8H",
"VP8O", "VP8S", "VP9", "VQ9", "VR", "VU", "VU4", "VU7",
"XE", "XF4", "XT", "XU", "XW", "XX9", "XZ",
"YA", "YB", "YI", "YJ", "YK", "YL", "YN", "YO", "YS", "YU", "YV", "YV0",
"Z2", "Z3", "ZA", "ZB", "ZC4", "ZD7", "ZD8", "ZD9", "ZF", "ZK1N",
"ZK1S", "ZK2", "ZK3", "ZL", "ZL7", "ZL8", "ZL9", "ZP", "ZS", "ZS8"
},
m_sfx {"P", "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "A"},
mem_jt9 {shdmem},
m_msAudioOutputBuffered (0u),
m_framesAudioInputBuffered (RX_SAMPLE_RATE / 10),
m_downSampleFactor (downSampleFactor),
m_audioThreadPriority (QThread::HighPriority),
m_bandEdited {false},
m_splitMode {false},
m_monitoring {false},
m_transmitting {false},
m_tune {false},
m_tune_attenuation {0},
m_tune_attenuation_restore {0},
m_block_pwr_tooltip {false},
m_lastMonitoredFrequency {default_frequency},
m_toneSpacing {0.},
m_firstDecode {0},
m_optimizingProgress {"Optimizing decoder FFTs for your CPU.\n"
"Please be patient,\n"
"this may take a few minutes", QString {}, 0, 1, this},
m_messageClient {new MessageClient {QApplication::applicationName (),
m_config.udp_server_name (), m_config.udp_server_port (),
this}},
psk_Reporter {new PSK_Reporter {m_messageClient, this}},
m_manual {network_manager}
{
ui->setupUi(this);
m_baseCall = Radio::base_callsign (m_config.my_callsign ());
m_optimizingProgress.setWindowModality (Qt::WindowModal);
m_optimizingProgress.setAutoReset (false);
m_optimizingProgress.setMinimumDuration (15000); // only show after 15s delay
// Closedown.
connect (ui->actionExit, &QAction::triggered, this, &QMainWindow::close);
// parts of the rig error message box that are fixed
m_rigErrorMessageBox.setInformativeText (tr ("Do you want to reconfigure the radio interface?"));
m_rigErrorMessageBox.setStandardButtons (QMessageBox::Cancel | QMessageBox::Ok | QMessageBox::Retry);
m_rigErrorMessageBox.setDefaultButton (QMessageBox::Ok);
m_rigErrorMessageBox.setIcon (QMessageBox::Critical);
// start audio thread and hook up slots & signals for shutdown management
// these objects need to be in the audio thread so that invoking
// their slots is done in a thread safe way
m_soundOutput->moveToThread (&m_audioThread);
m_modulator->moveToThread (&m_audioThread);
m_soundInput->moveToThread (&m_audioThread);
m_detector->moveToThread (&m_audioThread);
// hook up sound output stream slots & signals and disposal
connect (this, &MainWindow::initializeAudioOutputStream, m_soundOutput, &SoundOutput::setFormat);
connect (m_soundOutput, &SoundOutput::error, this, &MainWindow::showSoundOutError);
// connect (m_soundOutput, &SoundOutput::status, this, &MainWindow::showStatusMessage);
connect (this, &MainWindow::outAttenuationChanged, m_soundOutput, &SoundOutput::setAttenuation);
connect (&m_audioThread, &QThread::finished, m_soundOutput, &QObject::deleteLater);
// hook up Modulator slots and disposal
connect (this, &MainWindow::transmitFrequency, m_modulator, &Modulator::setFrequency);
connect (this, &MainWindow::endTransmitMessage, m_modulator, &Modulator::stop);
connect (this, &MainWindow::tune, m_modulator, &Modulator::tune);
connect (this, &MainWindow::sendMessage, m_modulator, &Modulator::start);
connect (&m_audioThread, &QThread::finished, m_modulator, &QObject::deleteLater);
// hook up the audio input stream signals, slots and disposal
connect (this, &MainWindow::startAudioInputStream, m_soundInput, &SoundInput::start);
connect (this, &MainWindow::suspendAudioInputStream, m_soundInput, &SoundInput::suspend);
connect (this, &MainWindow::resumeAudioInputStream, m_soundInput, &SoundInput::resume);
connect (this, &MainWindow::finished, m_soundInput, &SoundInput::stop);
connect(m_soundInput, &SoundInput::error, this, &MainWindow::showSoundInError);
// connect(m_soundInput, &SoundInput::status, this, &MainWindow::showStatusMessage);
connect (&m_audioThread, &QThread::finished, m_soundInput, &QObject::deleteLater);
connect (this, &MainWindow::finished, this, &MainWindow::close);
// hook up the detector signals, slots and disposal
connect (this, &MainWindow::FFTSize, m_detector, &Detector::setBlockSize);
connect(m_detector, &Detector::framesWritten, this, &MainWindow::dataSink);
connect (&m_audioThread, &QThread::finished, m_detector, &QObject::deleteLater);
// setup the waterfall
connect(m_wideGraph.data (), SIGNAL(freezeDecode2(int)),this,SLOT(freezeDecode(int)));
connect(m_wideGraph.data (), SIGNAL(f11f12(int)),this,SLOT(bumpFqso(int)));
connect(m_wideGraph.data (), SIGNAL(setXIT2(int)),this,SLOT(setXIT(int)));
connect(m_fastGraph.data(),SIGNAL(fastPick(int,int,int)),this,
SLOT(fastPick(int,int,int)));
connect (this, &MainWindow::finished, m_wideGraph.data (), &WideGraph::close);
connect (this, &MainWindow::finished, m_echoGraph.data (), &EchoGraph::close);
connect (this, &MainWindow::finished, m_fastGraph.data (), &FastGraph::close);
// setup the log QSO dialog
connect (m_logDlg.data (), &LogQSO::acceptQSO, this, &MainWindow::acceptQSO2);
connect (this, &MainWindow::finished, m_logDlg.data (), &LogQSO::close);
// Network message handlers
connect (m_messageClient, &MessageClient::reply, this, &MainWindow::replyToCQ);
connect (m_messageClient, &MessageClient::replay, this, &MainWindow::replayDecodes);
connect (m_messageClient, &MessageClient::halt_tx, [this] (bool auto_only) {
if (m_config.accept_udp_requests ()) {
if (auto_only) {
if (ui->autoButton->isChecked ()) {
ui->autoButton->click();
}
} else {
ui->stopTxButton->click();
}
}
});
connect (m_messageClient, &MessageClient::error, this, &MainWindow::networkError);
connect (m_messageClient, &MessageClient::free_text, [this] (QString const& text, bool send) {
if (m_config.accept_udp_requests ()) {
// send + non-empty text means set and send the free text
// message, !send + non-empty text means set the current free
// text message, send + empty text means send the current free
// text message without change, !send + empty text means clear
// the current free text message
qDebug () << "Free text UDP message - text:" << text << "send:" << send << "text empty:" << text.isEmpty ();
if (0 == ui->tabWidget->currentIndex ()) {
if (!text.isEmpty ()) {
ui->tx5->setCurrentText (text);
}
if (send) {
ui->txb5->click ();
} else if (text.isEmpty ()) {
ui->tx5->setCurrentText (text);
}
} else if (1 == ui->tabWidget->currentIndex ()) {
if (!text.isEmpty ()) {
ui->freeTextMsg->setCurrentText (text);
}
if (send) {
ui->rbFreeText->click ();
} else if (text.isEmpty ()) {
ui->freeTextMsg->setCurrentText (text);
}
}
}
});
// Hook up WSPR band hopping
connect (ui->band_hopping_schedule_push_button, &QPushButton::clicked
, &m_WSPR_band_hopping, &WSPRBandHopping::show_dialog);
connect (ui->sbTxPercent, static_cast<void (QSpinBox::*) (int)> (&QSpinBox::valueChanged)
, &m_WSPR_band_hopping, &WSPRBandHopping::set_tx_percent);
on_EraseButton_clicked ();
QActionGroup* modeGroup = new QActionGroup(this);
ui->actionJT9->setActionGroup(modeGroup);
ui->actionJT65->setActionGroup(modeGroup);
ui->actionJT9_JT65->setActionGroup(modeGroup);
ui->actionJT4->setActionGroup(modeGroup);
ui->actionWSPR_2->setActionGroup(modeGroup);
ui->actionWSPR_15->setActionGroup(modeGroup);
ui->actionEcho->setActionGroup(modeGroup);
ui->actionISCAT->setActionGroup(modeGroup);
ui->actionJTMSK->setActionGroup(modeGroup);
ui->actionMSK144->setActionGroup(modeGroup);
ui->actionQRA->setActionGroup(modeGroup);
QActionGroup* saveGroup = new QActionGroup(this);
ui->actionNone->setActionGroup(saveGroup);
ui->actionSave_decoded->setActionGroup(saveGroup);
ui->actionSave_all->setActionGroup(saveGroup);
QActionGroup* DepthGroup = new QActionGroup(this);
ui->actionQuickDecode->setActionGroup(DepthGroup);
ui->actionMediumDecode->setActionGroup(DepthGroup);
ui->actionDeepestDecode->setActionGroup(DepthGroup);
// ui->actionInclude_averaging->setActionGroup(DepthGroup);
// ui->actionInclude_correlation->setActionGroup(DepthGroup);
connect (ui->download_samples_action, &QAction::triggered, [this, network_manager] () {
if (!m_sampleDownloader)
{
m_sampleDownloader.reset (new SampleDownloader {m_settings, &m_config, network_manager, this});
}
m_sampleDownloader->show ();
});
QButtonGroup* txMsgButtonGroup = new QButtonGroup {this};
txMsgButtonGroup->addButton(ui->txrb1,1);
txMsgButtonGroup->addButton(ui->txrb2,2);
txMsgButtonGroup->addButton(ui->txrb3,3);
txMsgButtonGroup->addButton(ui->txrb4,4);
txMsgButtonGroup->addButton(ui->txrb5,5);
txMsgButtonGroup->addButton(ui->txrb6,6);
connect(txMsgButtonGroup,SIGNAL(buttonClicked(int)),SLOT(set_ntx(int)));
connect(ui->decodedTextBrowser2,SIGNAL(selectCallsign(bool,bool)),this,
SLOT(doubleClickOnCall(bool,bool)));
connect(ui->decodedTextBrowser,SIGNAL(selectCallsign(bool,bool)),this,
SLOT(doubleClickOnCall2(bool,bool)));
// initialise decoded text font and hook up change signal
setDecodedTextFont (m_config.decoded_text_font ());
connect (&m_config, &Configuration::decoded_text_font_changed, [this] (QFont const& font) {
setDecodedTextFont (font);
});
setWindowTitle (program_title ());
createStatusBar();
connect(&proc_jt9, &QProcess::readyReadStandardOutput, this, &MainWindow::readFromStdout);
connect(&proc_jt9, static_cast<void (QProcess::*) (QProcess::ProcessError)> (&QProcess::error),
[this] (QProcess::ProcessError error) {
subProcessError (&proc_jt9, error);
});
connect(&proc_jt9, static_cast<void (QProcess::*) (int, QProcess::ExitStatus)> (&QProcess::finished),
[this] (int exitCode, QProcess::ExitStatus status) {
subProcessFailed (&proc_jt9, exitCode, status);
});
connect(&p1, &QProcess::readyReadStandardOutput, this, &MainWindow::p1ReadFromStdout);
connect(&proc_jt9, static_cast<void (QProcess::*) (QProcess::ProcessError)> (&QProcess::error),
[this] (QProcess::ProcessError error) {
subProcessError (&p1, error);
});
connect(&p1, static_cast<void (QProcess::*) (int, QProcess::ExitStatus)> (&QProcess::finished),
[this] (int exitCode, QProcess::ExitStatus status) {
subProcessFailed (&p1, exitCode, status);
});
connect(&p3, static_cast<void (QProcess::*) (QProcess::ProcessError)> (&QProcess::error),
[this] (QProcess::ProcessError error) {
subProcessError (&p3, error);
});
connect(&p3, static_cast<void (QProcess::*) (int, QProcess::ExitStatus)> (&QProcess::finished),
[this] (int exitCode, QProcess::ExitStatus status) {
subProcessFailed (&p3, exitCode, status);
});
// hook up save WAV file exit handling
connect (&m_saveWAVWatcher, &QFutureWatcher<QString>::finished, [this] {
// extract the promise from the future
auto const& result = m_saveWAVWatcher.future ().result ();
if (!result.isEmpty ()) // error
{
QMessageBox::critical (this, tr("Error writing WAV file"), result);
}
});
// Hook up working frequencies.
ui->bandComboBox->setModel (m_config.frequencies ());
ui->bandComboBox->setModelColumn (FrequencyList::frequency_mhz_column);
// combo box drop down width defaults to the line edit + decorator width,
// here we change that to the column width size hint of the model column
ui->bandComboBox->view ()->setMinimumWidth (ui->bandComboBox->view ()->sizeHintForColumn (FrequencyList::frequency_mhz_column));
// Enable live band combo box entry validation and action.
auto band_validator = new LiveFrequencyValidator {ui->bandComboBox
, m_config.bands ()
, m_config.frequencies ()
, &m_freqNominal
, this};
ui->bandComboBox->setValidator (band_validator);
// Hook up signals.
connect (band_validator, &LiveFrequencyValidator::valid, this, &MainWindow::band_changed);
connect (ui->bandComboBox->lineEdit (), &QLineEdit::textEdited, [this] (QString const&) {m_bandEdited = true;});
// hook up configuration signals
connect (&m_config, &Configuration::transceiver_update, this, &MainWindow::handle_transceiver_update);
connect (&m_config, &Configuration::transceiver_failure, this, &MainWindow::handle_transceiver_failure);
connect (&m_config, &Configuration::udp_server_changed, m_messageClient, &MessageClient::set_server);
connect (&m_config, &Configuration::udp_server_port_changed, m_messageClient, &MessageClient::set_server_port);
// set up configurations menu
m_multi_settings->create_menu_actions (this, ui->menuConfig);
// set up message text validators
ui->tx1->setValidator (new QRegExpValidator {message_alphabet, this});
ui->tx2->setValidator (new QRegExpValidator {message_alphabet, this});
ui->tx3->setValidator (new QRegExpValidator {message_alphabet, this});
ui->tx4->setValidator (new QRegExpValidator {message_alphabet, this});
ui->tx5->setValidator (new QRegExpValidator {message_alphabet, this});
ui->tx6->setValidator (new QRegExpValidator {message_alphabet, this});
ui->freeTextMsg->setValidator (new QRegExpValidator {message_alphabet, this});
// Free text macros model to widget hook up.
ui->tx5->setModel (m_config.macros ());
connect (ui->tx5->lineEdit ()
, &QLineEdit::editingFinished
, [this] () {on_tx5_currentTextChanged (ui->tx5->lineEdit ()->text ());});
ui->freeTextMsg->setModel (m_config.macros ());
connect (ui->freeTextMsg->lineEdit ()
, &QLineEdit::editingFinished
, [this] () {on_freeTextMsg_currentTextChanged (ui->freeTextMsg->lineEdit ()->text ());});
connect(&m_guiTimer, &QTimer::timeout, this, &MainWindow::guiUpdate);
m_guiTimer.start(100); //### Don't change the 100 ms! ###
ptt0Timer.setSingleShot(true);
connect(&ptt0Timer, &QTimer::timeout, this, &MainWindow::stopTx2);
ptt1Timer.setSingleShot(true);
connect(&ptt1Timer, &QTimer::timeout, this, &MainWindow::startTx2);
logQSOTimer.setSingleShot(true);
connect(&logQSOTimer, &QTimer::timeout, this, &MainWindow::on_logQSOButton_clicked);
tuneButtonTimer.setSingleShot(true);
connect(&tuneButtonTimer, &QTimer::timeout, this, &MainWindow::on_stopTxButton_clicked);
tuneATU_Timer.setSingleShot(true);
connect(&tuneATU_Timer, &QTimer::timeout, this, &MainWindow::stopTuneATU);
killFileTimer.setSingleShot(true);
connect(&killFileTimer, &QTimer::timeout, this, &MainWindow::killFile);
uploadTimer.setSingleShot(true);
connect(&uploadTimer, SIGNAL(timeout()), this, SLOT(uploadSpots()));
TxAgainTimer.setSingleShot(true);
connect(&TxAgainTimer, SIGNAL(timeout()), this, SLOT(TxAgain()));
RxQSYTimer.setSingleShot(true);
connect(&RxQSYTimer, SIGNAL(timeout()), this, SLOT(RxQSY()));
connect(m_wideGraph.data (), SIGNAL(setFreq3(int,int)),this,
SLOT(setFreq4(int,int)));
m_QSOText.clear();
decodeBusy(false);
QString t1[28]={"1 uW","2 uW","5 uW","10 uW","20 uW","50 uW","100 uW","200 uW","500 uW",
"1 mW","2 mW","5 mW","10 mW","20 mW","50 mW","100 mW","200 mW","500 mW",
"1 W","2 W","5 W","10 W","20 W","50 W","100 W","200 W","500 W","1 kW"};
for(int i=0; i<28; i++) { //Initialize dBm values
float dbm=(10.0*i)/3.0 - 30.0;
int ndbm=0;
if(dbm<0) ndbm=int(dbm-0.5);
if(dbm>=0) ndbm=int(dbm+0.5);
QString t;
t.sprintf("%d dBm ",ndbm);
t+=t1[i];
ui->TxPowerComboBox->addItem(t);
}
ui->labAz->setStyleSheet("border: 0px;");
ui->labDist->setStyleSheet("border: 0px;");
auto t = "UTC dB DT Freq Message";
ui->decodedTextLabel->setText(t);
ui->decodedTextLabel2->setText(t);
readSettings(); //Restore user's setup params
m_audioThread.start (m_audioThreadPriority);
#ifdef WIN32
if (!m_multiple)
{
while(true)
{
int iret=killbyname("jt9.exe");
if(iret == 603) break;
if(iret != 0) msgBox("KillByName return code: " +
QString::number(iret));
}
}
#endif
auto_tx_label->setText (m_config.quick_call () ? "Auto-Tx-Enable Armed" : "Auto-Tx-Enable Disarmed");
{
//delete any .quit file that might have been left lying around
//since its presence will cause jt9 to exit a soon as we start it
//and decodes will hang
QFile quitFile {m_config.temp_dir ().absoluteFilePath (".quit")};
while (quitFile.exists ())
{
if (!quitFile.remove ())
{
msgBox ("Error removing \"" + quitFile.fileName () +
"\" - OK to retry.");
}
}
}
//Create .lock so jt9 will wait
QFile {m_config.temp_dir ().absoluteFilePath (".lock")}.open(QIODevice::ReadWrite);
QStringList jt9_args {
"-s", QApplication::applicationName () // shared memory key,
// includes rig-name
#ifdef NDEBUG
, "-w", "1" //FFTW patience - release
#else
, "-w", "1" //FFTW patience - debug builds for speed
#endif
// The number of threads for FFTW specified here is chosen as
// three because that gives the best throughput of the large
// FFTs used in jt9. The count is the minimum of (the number
// available CPU threads less one) and three. This ensures that
// there is always at least one free CPU thread to run the other
// mode decoder in parallel.
, "-m", QString::number (qMin (qMax (QThread::idealThreadCount () - 1, 1), 3)) //FFTW threads
, "-e", QDir::toNativeSeparators (m_appDir)
, "-a", QDir::toNativeSeparators (m_dataDir.absolutePath ())
, "-t", QDir::toNativeSeparators (m_config.temp_dir ().absolutePath ())
};
proc_jt9.start(QDir::toNativeSeparators (m_appDir) + QDir::separator () +
"jt9", jt9_args, QIODevice::ReadWrite | QIODevice::Unbuffered);
QString fname {QDir::toNativeSeparators(m_dataDir.absoluteFilePath ("wsjtx_wisdom.dat"))};
QByteArray cfname=fname.toLocal8Bit();
fftwf_import_wisdom_from_filename(cfname);
genStdMsgs(m_rpt);
m_ntx = 6;
ui->txrb6->setChecked(true);
connect (&m_wav_future_watcher, &QFutureWatcher<void>::finished, this, &MainWindow::diskDat);
connect(&watcher3, SIGNAL(finished()),this,SLOT(fast_decode_done()));
// Q_EMIT startAudioInputStream (m_config.audio_input_device (), m_framesAudioInputBuffered, &m_detector, m_downSampleFactor, m_config.audio_input_channel ());
Q_EMIT startAudioInputStream (m_config.audio_input_device (), m_framesAudioInputBuffered, m_detector, m_downSampleFactor, m_config.audio_input_channel ());
Q_EMIT initializeAudioOutputStream (m_config.audio_output_device (), AudioDevice::Mono == m_config.audio_output_channel () ? 1 : 2, m_msAudioOutputBuffered);
Q_EMIT transmitFrequency (ui->TxFreqSpinBox->value () - m_XIT);
enable_DXCC_entity (m_config.DXCC ()); // sets text window proportions and (re)inits the logbook
ui->label_9->setStyleSheet("QLabel{background-color: #aabec8}");
ui->label_10->setStyleSheet("QLabel{background-color: #aabec8}");
// this must be done before initializing the mode as some modes need
// to turn off split on the rig e.g. WSPR
m_config.transceiver_online ();
bool b=m_config.enable_VHF_features() and (m_mode=="JT4" or m_mode=="JT65" or
m_mode=="ISCAT" or m_mode=="JT9" or m_mode=="JTMSK" or m_mode=="MSK144" or
m_mode=="QRA");
VHF_controls_visible(b);
ui->txFirstCheckBox->setChecked(m_txFirst);
morse_(const_cast<char *> (m_config.my_callsign ().toLatin1().constData()),
const_cast<int *> (icw), &m_ncw, m_config.my_callsign ().length());
on_actionWide_Waterfall_triggered();
m_wideGraph->setTol(500);
m_wideGraph->setLockTxFreq(m_lockTxFreq);
m_wideGraph->setMode(m_mode);
m_wideGraph->setModeTx(m_modeTx);
ui->sbSubmode->setValue(m_nSubMode);
ui->sbFtol->setValue(m_FtolIndex);
on_sbFtol_valueChanged(m_FtolIndex);
ui->cbEME->setChecked(m_bEME);
ui->cbFast9->setChecked(m_bFast9);
if(m_bFast9) m_bFastMode=true;
if(m_mode=="JT4") on_actionJT4_triggered();
if(m_mode=="JT9") on_actionJT9_triggered();
if(m_mode=="JT65") on_actionJT65_triggered();
if(m_mode=="JT9+JT65") on_actionJT9_JT65_triggered();
if(m_mode=="WSPR-2") on_actionWSPR_2_triggered();
if(m_mode=="WSPR-15") on_actionWSPR_15_triggered();
if(m_mode=="Echo") on_actionEcho_triggered();
if(m_mode=="ISCAT") on_actionISCAT_triggered();
if(m_mode=="JTMSK") on_actionJTMSK_triggered();
if(m_mode=="MSK144") on_actionMSK144_triggered();
if(m_mode=="QRA") on_actionQRA_triggered();
if(m_mode=="Echo") monitor(false); //Don't auto-start Monitor in Echo mode.
ui->sbTR->setValue(m_TRindex);
Q_EMIT transmitFrequency (ui->TxFreqSpinBox->value () - m_XIT);
m_saveDecoded=ui->actionSave_decoded->isChecked();
m_saveAll=ui->actionSave_all->isChecked();
ui->inGain->setValue(m_inGain);
ui->sbTxPercent->setValue(m_pctx);
ui->TxPowerComboBox->setCurrentIndex(int(0.3*(m_dBm + 30.0)+0.2));
ui->cbUploadWSPR_Spots->setChecked(m_uploadSpots);
ui->sbCQRxFreq->setValue(m_freqCQ);
ui->cbTxLock->setChecked(m_lockTxFreq);
if((m_ndepth&7)==1) ui->actionQuickDecode->setChecked(true);
if((m_ndepth&7)==2) ui->actionMediumDecode->setChecked(true);
if((m_ndepth&7)==3) ui->actionDeepestDecode->setChecked(true);
ui->actionInclude_averaging->setChecked((m_ndepth&16)>0);
ui->actionInclude_correlation->setChecked((m_ndepth&32)>0);
m_ntx = 1;
ui->txrb1->setChecked(true);
if(m_mode.startsWith ("WSPR") and m_pctx>0) {
QPalette palette {ui->sbTxPercent->palette ()};
palette.setColor(QPalette::Base,Qt::yellow);
ui->sbTxPercent->setPalette(palette);
}
if(m_mode=="WSPR-2") {
m_hsymStop=396;
} else if(m_mode=="WSPR-15") {
m_hsymStop=3090;
} else if(m_mode=="Echo") {
m_hsymStop=10;
} else {
m_hsymStop=173;
if(m_config.decode_at_52s()) m_hsymStop=179;
}
VHF_features_enabled(m_config.enable_VHF_features());
g_single_decode=m_config.single_decode();
progressBar->setMaximum(m_TRperiod);
m_modulator->setPeriod(m_TRperiod); // TODO - not thread safe
connect( wsprNet, SIGNAL(uploadStatus(QString)), this, SLOT(uploadResponse(QString)));
if(m_bFastMode) {
int ntr[]={5,10,15,30};
m_TRperiod=ntr[m_TRindex-11];
}
QString pchkFile = m_config.data_dir().absoluteFilePath("peg-128-80-reg3.pchk");
QByteArray ba = pchkFile.toLocal8Bit();
for(int i=0; i<512; i++) {
m_pchkFile[i]=32;
if(i<pchkFile.length()) m_pchkFile[i]=ba[i];
}
statusChanged();
// this must be the last statement of constructor
if (!m_valid) throw std::runtime_error {"Fatal initialization exception"};
}
//--------------------------------------------------- MainWindow destructor
MainWindow::~MainWindow()
{
m_astroWidget.reset ();
QString fname {QDir::toNativeSeparators(m_dataDir.absoluteFilePath ("wsjtx_wisdom.dat"))};
QByteArray cfname=fname.toLocal8Bit();
fftwf_export_wisdom_to_filename(cfname);
m_audioThread.quit ();
m_audioThread.wait ();
}
//-------------------------------------------------------- writeSettings()
void MainWindow::writeSettings()
{
m_settings->beginGroup("MainWindow");
m_settings->setValue ("geometry", saveGeometry ());
m_settings->setValue ("state", saveState ());
m_settings->setValue("MRUdir", m_path);
m_settings->setValue("TxFirst",m_txFirst);
m_settings->setValue("DXcall",ui->dxCallEntry->text());
m_settings->setValue("DXgrid",ui->dxGridEntry->text());
m_settings->setValue ("AstroDisplayed", m_astroWidget && m_astroWidget->isVisible());
m_settings->setValue ("MsgAvgDisplayed", m_msgAvgWidget && m_msgAvgWidget->isVisible());
m_settings->setValue ("FreeText", ui->freeTextMsg->currentText ());
m_settings->endGroup();
m_settings->beginGroup("Common");
m_settings->setValue("Mode",m_mode);
m_settings->setValue("ModeTx",m_modeTx);
m_settings->setValue("SaveNone",ui->actionNone->isChecked());
m_settings->setValue("SaveDecoded",ui->actionSave_decoded->isChecked());
m_settings->setValue("SaveAll",ui->actionSave_all->isChecked());
m_settings->setValue("NDepth",m_ndepth);
m_settings->setValue("RxFreq",ui->RxFreqSpinBox->value());
m_settings->setValue("TxFreq",ui->TxFreqSpinBox->value());
m_settings->setValue("WSPRfreq",ui->WSPRfreqSpinBox->value());
m_settings->setValue("TRindex",ui->sbTR->value());
m_settings->setValue("SubMode",ui->sbSubmode->value());
m_settings->setValue("DTtol",m_DTtol);
m_settings->setValue("FtolIndex",m_FtolIndex);
m_settings->setValue("MinSync",m_minSync);
m_settings->setValue("EME",m_bEME);
m_settings->setValue ("DialFreq", QVariant::fromValue(m_lastMonitoredFrequency));
m_settings->setValue("InGain",m_inGain);
m_settings->setValue("OutAttenuation", ui->outAttenuation->value ());
m_settings->setValue("NoSuffix",m_noSuffix);
m_settings->setValue("GUItab",ui->tabWidget->currentIndex());
m_settings->setValue("OutBufSize",outBufSize);
m_settings->setValue("LockTxFreq",m_lockTxFreq);
m_settings->setValue("PctTx",m_pctx);
m_settings->setValue("dBm",m_dBm);
m_settings->setValue("UploadSpots",m_uploadSpots);
m_settings->setValue ("BandHopping", ui->band_hopping_group_box->isChecked ());
m_settings->setValue("TRindex",m_TRindex);
m_settings->setValue("FastMode",m_bFastMode);
m_settings->setValue("Fast9",m_bFast9);
m_settings->setValue("CQRxfreq",m_freqCQ);
m_settings->setValue("TuneAttenuation",m_tune_attenuation);
m_settings->endGroup();
}
//---------------------------------------------------------- readSettings()
void MainWindow::readSettings()
{
m_settings->beginGroup("MainWindow");
restoreGeometry (m_settings->value ("geometry", saveGeometry ()).toByteArray ());
restoreState (m_settings->value ("state", saveState ()).toByteArray ());
ui->dxCallEntry->setText(m_settings->value("DXcall","").toString());
ui->dxGridEntry->setText(m_settings->value("DXgrid","").toString());
m_path = m_settings->value("MRUdir", m_config.save_directory ().absolutePath ()).toString ();
m_txFirst = m_settings->value("TxFirst",false).toBool();
auto displayAstro = m_settings->value ("AstroDisplayed", false).toBool ();
auto displayMsgAvg = m_settings->value ("MsgAvgDisplayed", false).toBool ();
if (m_settings->contains ("FreeText")) ui->freeTextMsg->setCurrentText (
m_settings->value ("FreeText").toString ());
m_settings->endGroup();
// do this outside of settings group because it uses groups internally
ui->actionAstronomical_data->setChecked (displayAstro);
m_settings->beginGroup("Common");
m_mode=m_settings->value("Mode","JT9").toString();
m_modeTx=m_settings->value("ModeTx","JT9").toString();
if(m_modeTx.mid(0,3)=="JT9") ui->pbTxMode->setText("Tx JT9 @");
if(m_modeTx=="JT65") ui->pbTxMode->setText("Tx JT65 #");
ui->actionNone->setChecked(m_settings->value("SaveNone",true).toBool());
ui->actionSave_decoded->setChecked(m_settings->value("SaveDecoded",false).toBool());
ui->actionSave_all->setChecked(m_settings->value("SaveAll",false).toBool());
ui->RxFreqSpinBox->setValue(0); // ensure a change is signaled
ui->RxFreqSpinBox->setValue(m_settings->value("RxFreq",1500).toInt());
m_nSubMode=m_settings->value("SubMode",0).toInt();
m_FtolIndex=m_settings->value("FtolIndex",21).toInt();
// ui->FTol_combo_box->setCurrentText(m_settings->value("FTol","500").toString ());
ui->syncSpinBox->setValue(m_settings->value("MinSync",0).toInt());
m_bEME=m_settings->value("EME",false).toBool();
m_bFast9=m_settings->value("Fast9",false).toBool();
m_bFastMode=m_settings->value("FastMode",false).toBool();
m_TRindex=m_settings->value("TRindex",0).toInt();
m_lastMonitoredFrequency = m_settings->value ("DialFreq",
QVariant::fromValue<Frequency> (default_frequency)).value<Frequency> ();
ui->WSPRfreqSpinBox->setValue(0); // ensure a change is signaled
ui->WSPRfreqSpinBox->setValue(m_settings->value("WSPRfreq",1500).toInt());
ui->TxFreqSpinBox->setValue(0); // ensure a change is signaled
ui->TxFreqSpinBox->setValue(m_settings->value("TxFreq",1500).toInt());
m_ndepth=m_settings->value("NDepth",3).toInt();
m_inGain=m_settings->value("InGain",0).toInt();
m_pctx=m_settings->value("PctTx",20).toInt();
m_dBm=m_settings->value("dBm",37).toInt();
m_uploadSpots=m_settings->value("UploadSpots",false).toBool();
if(!m_uploadSpots) ui->cbUploadWSPR_Spots->setStyleSheet("QCheckBox{background-color: yellow}");
ui->band_hopping_group_box->setChecked (m_settings->value ("BandHopping", false).toBool());
// setup initial value of tx attenuator
m_block_pwr_tooltip = true;
ui->outAttenuation->setValue (m_settings->value ("OutAttenuation", 0).toInt ());
m_block_pwr_tooltip = false;
m_tune_attenuation = m_settings->value ("TuneAttenuation", 0).toInt ();
m_freqCQ=m_settings->value("CQRxFreq",285).toInt();
m_noSuffix=m_settings->value("NoSuffix",false).toBool();
int n=m_settings->value("GUItab",0).toInt();
ui->tabWidget->setCurrentIndex(n);
outBufSize=m_settings->value("OutBufSize",4096).toInt();
m_lockTxFreq=m_settings->value("LockTxFreq",false).toBool();
m_TRindex=m_settings->value("TRindex",4).toInt();
m_settings->endGroup();
// use these initialisation settings to tune the audio o/p buffer
// size and audio thread priority
m_settings->beginGroup ("Tune");
m_msAudioOutputBuffered = m_settings->value ("Audio/OutputBufferMs").toInt ();
m_framesAudioInputBuffered = m_settings->value ("Audio/InputBufferFrames", RX_SAMPLE_RATE / 10).toInt ();
m_audioThreadPriority = static_cast<QThread::Priority> (m_settings->value ("Audio/ThreadPriority", QThread::HighPriority).toInt () % 8);
m_settings->endGroup ();
if (displayMsgAvg) on_actionMessage_averaging_triggered();
}
void MainWindow::setDecodedTextFont (QFont const& font)
{
ui->decodedTextBrowser->setContentFont (font);
ui->decodedTextBrowser2->setContentFont (font);
auto style_sheet = "QLabel {" + font_as_stylesheet (font) + '}';
ui->decodedTextLabel->setStyleSheet (ui->decodedTextLabel->styleSheet () + style_sheet);
ui->decodedTextLabel2->setStyleSheet (ui->decodedTextLabel2->styleSheet () + style_sheet);
if (m_msgAvgWidget) {
m_msgAvgWidget->changeFont (font);
}
updateGeometry ();
}
//-------------------------------------------------------------- dataSink()
void MainWindow::dataSink(qint64 frames)
{
static float s[NSMAX];
int k (frames);
QString fname {QDir::toNativeSeparators(m_dataDir.absoluteFilePath ("refspec.dat"))};
QByteArray bafname = fname.toLatin1();
const char *c_fname = bafname.data();
int len=fname.length();
if(m_diskData) {
dec_data.params.ndiskdat=1;
} else {
dec_data.params.ndiskdat=0;
}
if(m_mode=="ISCAT" or m_mode=="JTMSK" or m_mode=="MSK144" or m_bFast9) {
fastSink(frames);
return;
}
m_bUseRef=m_wideGraph->useRef();
refspectrum_(&dec_data.d2[k-m_nsps/2],&m_bRefSpec,&m_bUseRef,c_fname,len);
// Get power, spectrum, and ihsym
int trmin=m_TRperiod/60;
// int k (frames - 1);
dec_data.params.nfa=m_wideGraph->nStartFreq();
dec_data.params.nfb=m_wideGraph->Fmax();
int nsps=m_nsps;
if(m_bFastMode) nsps=6912;
int nsmo=m_wideGraph->smoothYellow()-1;
symspec_(&dec_data,&k,&trmin,&nsps,&m_inGain,&nsmo,&m_px,s,&m_df3,&m_ihsym,&m_npts8);
if(m_mode=="WSPR-2") wspr_downsample_(dec_data.d2,&k);
if(m_ihsym <=0) return;
QString t;
m_pctZap=m_nzap*100.0/m_nsps; // TODO: this is currently redundant
t.sprintf(" Rx noise: %5.1f ",m_px);
if (ui) ui->signal_meter_widget->setValue(m_px); // Update thermometer
if(m_monitoring || m_diskData) {
m_wideGraph->dataSink2(s,m_df3,m_ihsym,m_diskData);
}
if(m_mode=="WSPR-2") {
m_hsymStop=396;
} else if(m_mode=="WSPR-15") {
m_hsymStop=3090;
} else if(m_mode=="Echo") {
m_hsymStop=10;
} else {
m_hsymStop=173;
if(m_config.decode_at_52s()) m_hsymStop=179;
}
if(m_ihsym==3*m_hsymStop/4) {
m_dialFreqRxWSPR=m_freqNominal;
}
if(m_ihsym == m_hsymStop) {
if(m_mode=="Echo") {
float snr=0;
int nfrit=0;
int nqual=0;
float f1=1500.0;
float xlevel=0.0;
float sigdb=0.0;
float dfreq=0.0;
float width=0.0;
echocom_.nclearave=m_nclearave;
int nDop=0;
avecho_(dec_data.d2,&nDop,&nfrit,&nqual,&f1,&xlevel,&sigdb,
&snr,&dfreq,&width);
QString t;
t.sprintf("%3d %7.1f %7.1f %7.1f %7.1f %3d",echocom_.nsum,xlevel,sigdb,
dfreq,width,nqual);
t=QDateTime::currentDateTimeUtc().toString("hh:mm:ss ") + t;
if (ui) ui->decodedTextBrowser->appendText(t);
if(m_echoGraph->isVisible()) m_echoGraph->plotSpec();
m_nclearave=0;
//Don't restart Monitor after an Echo transmission
if(m_bEchoTxed and !m_auto) {
monitor(false);
m_bEchoTxed=false;
}
return;
}
if( m_dialFreqRxWSPR==0) m_dialFreqRxWSPR=m_freqNominal;
m_dataAvailable=true;
dec_data.params.npts8=(m_ihsym*m_nsps)/16;
dec_data.params.newdat=1;
dec_data.params.nagain=0;
dec_data.params.nzhsym=m_hsymStop;
QDateTime t = QDateTime::currentDateTimeUtc();
m_dateTime=t.toString("yyyy-MMM-dd hh:mm");
if(!m_mode.startsWith ("WSPR")) decode(); //Start decoder
if(!m_diskData) { //Always save; may delete later
int ihr=t.time().toString("hh").toInt();
int imin=t.time().toString("mm").toInt();
imin=imin - (imin%(m_TRperiod/60));
QString t2;
t2.sprintf("%2.2d%2.2d",ihr,imin);
m_fileToSave.clear ();
m_fname = m_config.save_directory ().absoluteFilePath (t.date().toString("yyMMdd") + "_" + t2);
// the following is potential a threading hazard - not a good
// idea to pass pointer to be processed in another thread
m_saveWAVWatcher.setFuture (QtConcurrent::run (std::bind (&MainWindow::save_wave_file
, this
, m_fname
, &dec_data.d2[0]
, m_TRperiod
, m_config.my_callsign ()
, m_config.my_grid ()
, m_mode
, m_nSubMode
, m_freqNominal
, m_hisCall
, m_hisGrid)));
if (m_mode.startsWith ("WSPR")) {
QString c2name_string {m_fname + ".c2"};
int len1=c2name_string.length();
char c2name[80];
strcpy(c2name,c2name_string.toLatin1 ().constData ());
int nsec=120;
int nbfo=1500;
double f0m1500=m_freqNominal/1000000.0 + nbfo - 1500;
savec2_(c2name,&nsec,&f0m1500,len1);
}
}
if(m_mode.startsWith ("WSPR")) {
QString t2,cmnd;
double f0m1500=m_dialFreqRxWSPR/1000000.0; // + 0.000001*(m_BFO - 1500);
t2.sprintf(" -f %.6f ",f0m1500);
if(m_diskData) {
// cmnd='"' + m_appDir + '"' + "/wsprd " + m_path;
cmnd='"' + m_appDir + '"' + "/wsprd -a \"" +
QDir::toNativeSeparators(m_dataDir.absolutePath()) + "\" \"" + m_path + "\"";
// if(m_TRseconds==900) cmnd='"' + m_appDir + '"' + "/wsprd -m 15" + t2 +
// m_path + '"';
} else {
cmnd='"' + m_appDir + '"' + "/wsprd -a \"" +
QDir::toNativeSeparators(m_dataDir.absolutePath()) + "\" " +
t2 + '"' + m_fname + ".wav\"";
}
QString t3=cmnd;
int i1=cmnd.indexOf("/wsprd ");
cmnd=t3.mid(0,i1+7) + t3.mid(i1+7);
if (ui) ui->DecodeButton->setChecked (true);
p1.start(QDir::toNativeSeparators(cmnd));
m_decoderBusy = true;
statusUpdate ();
}
m_rxDone=true;
}
}
QString MainWindow::save_wave_file (QString const& name
, short const * data
, int seconds
, QString const& my_callsign
, QString const& my_grid
, QString const& mode
, qint32 sub_mode
, Frequency frequency
, QString const& his_call
, QString const& his_grid) const
{
//
// This member function runs in a thread and should not access
// members that may be changed in the GUI thread or any other thread
// without suitable synchronization.
//
QAudioFormat format;
format.setCodec ("audio/pcm");
format.setSampleRate (12000);
format.setChannelCount (1);
format.setSampleSize (16);
format.setSampleType (QAudioFormat::SignedInt);
auto source = QString {"%1, %2"}.arg (my_callsign).arg (my_grid);
auto comment = QString {"Mode=%1%2, Freq=%3%4"}
.arg (mode)
.arg (QString {mode.contains ('J') && !mode.contains ('+')
? QString {", Sub Mode="} + QChar {'A' + sub_mode}
: QString {}})
.arg (Radio::frequency_MHz_string (frequency))
.arg (QString {!mode.startsWith ("WSPR") ? QString {", DXCall=%1, DXGrid=%2"}
.arg (his_call)
.arg (his_grid).toLocal8Bit () : ""});
BWFFile::InfoDictionary list_info {
{{{'I','S','R','C'}}, source.toLocal8Bit ()},
{{{'I','S','F','T'}}, program_title (revision ()).simplified ().toLocal8Bit ()},
{{{'I','C','R','D'}}, QDateTime::currentDateTime ()
.toString ("yyyy-MM-ddTHH:mm:ss.zzzZ").toLocal8Bit ()},
{{{'I','C','M','T'}}, comment.toLocal8Bit ()},
};
BWFFile wav {format, name + ".wav", list_info};
if (!wav.open (BWFFile::WriteOnly)
|| 0 > wav.write (reinterpret_cast<char const *> (data)
, sizeof (short) * seconds * format.sampleRate ()))
{
return wav.errorString ();
}
return QString {};
}
//-------------------------------------------------------------- fastSink()
void MainWindow::fastSink(qint64 frames)
{
int k (frames);
bool decodeNow=false;
if(m_k0==9999999) {
memset(fast_green,0,sizeof(float)*703); //Zero fast_gereen[]
memset(fast_s2,0,sizeof(float)*703*64); //Zero fast_s2[]
m_bFastDecodeCalled=false;
} else {
if(k < m_k0) { //New sequence ?
memcpy(fast_green2,fast_green,4*703); //Copy fast_green[] to fast_green2[]
memcpy(fast_s2,fast_s,4*703*64); //Copy fast_s[] into fast_s2[]
fast_jh2=fast_jh;
if(!m_diskData) memset(dec_data.d2,0,2*30*12000); //Zero the d2[] array
m_decodeEarly=false;
m_bFastDecodeCalled=false;
QDateTime t=QDateTime::currentDateTimeUtc(); //.addSecs(2-m_TRperiod);
int ihr=t.toString("hh").toInt();
int imin=t.toString("mm").toInt();
int isec=t.toString("ss").toInt();
isec=isec - isec%m_TRperiod;
QString t2;
t2.sprintf("%2.2d%2.2d%2.2d.wav",ihr,imin,isec);
m_fname = m_config.save_directory().absoluteFilePath(
t.date().toString("yyMMdd") + "_" + t2);
}
}
hspec_(dec_data.d2, &k, &m_inGain, fast_green, fast_s, &fast_jh);
float px = fast_green[fast_jh] - 5.0;
QString t;
t.sprintf(" Rx noise: %5.1f ",px);
ui->signal_meter_widget->setValue(px); // Update thermometer
m_fastGraph->plotSpec();
decodeNow=false;
m_k0=k;
if(m_diskData and m_k0 >= dec_data.params.kin - 7 * 512) decodeNow=true;
if(!m_diskData and m_tRemaining<0.35 and !m_bFastDecodeCalled) decodeNow=true;
if(decodeNow) {
m_dataAvailable=true;
m_t0=0.0;
m_t1=k/12000.0;
m_kdone=k;
dec_data.params.newdat=1;
if(!m_decoderBusy) {
m_bFastDecodeCalled=true;
decode();
}
if(!m_diskData and (m_saveAll or m_saveDecoded) and m_fname != "" and
!m_decodeEarly) {
// the following is potential a threading hazard - not a good
// idea to pass pointer to be processed in another thread
m_saveWAVWatcher.setFuture (QtConcurrent::run (std::bind (&MainWindow::save_wave_file
, this
, m_fname
, &dec_data.d2[0]
, m_TRperiod
, m_config.my_callsign ()
, m_config.my_grid ()
, m_mode
, m_nSubMode
, m_freqNominal
, m_hisCall
, m_hisGrid)));
m_fileToKill=m_fname;
killFileTimer.start (3*1000*m_TRperiod/4); //Kill 3/4 period from now
}
m_decodeEarly=false;
}
}
void MainWindow::showSoundInError(const QString& errorMsg)
{QMessageBox::critical(this, tr("Error in SoundInput"), errorMsg);}
void MainWindow::showSoundOutError(const QString& errorMsg)
{QMessageBox::critical(this, tr("Error in SoundOutput"), errorMsg);}
void MainWindow::showStatusMessage(const QString& statusMsg)
{statusBar()->showMessage(statusMsg);}
void MainWindow::on_actionSettings_triggered() //Setup Dialog
{
// things that might change that we need know about
auto callsign = m_config.my_callsign ();
if (QDialog::Accepted == m_config.exec ())
{
if (m_config.my_callsign () != callsign)
{
m_baseCall = Radio::base_callsign (m_config.my_callsign ());
morse_(const_cast<char *> (m_config.my_callsign ().toLatin1().constData())
, const_cast<int *> (icw)
, &m_ncw
, m_config.my_callsign ().length());
}
on_dxGridEntry_textChanged (m_hisGrid); // recalculate distances in case of units change
enable_DXCC_entity (m_config.DXCC ()); // sets text window proportions and (re)inits the logbook
if(m_config.spot_to_psk_reporter ()) {
pskSetLocal ();
}
if(m_config.restart_audio_input ()) {
Q_EMIT startAudioInputStream (m_config.audio_input_device (),
m_framesAudioInputBuffered, m_detector,
m_downSampleFactor,
m_config.audio_input_channel ());
}
if(m_config.restart_audio_output ()) {
Q_EMIT initializeAudioOutputStream (m_config.audio_output_device (),
AudioDevice::Mono == m_config.audio_output_channel () ? 1 : 2,
m_msAudioOutputBuffered);
}
auto_tx_label->setText (m_config.quick_call () ? "Auto-Tx-Enable Armed" : "Auto-Tx-Enable Disarmed");
displayDialFrequency ();
bool b=m_config.enable_VHF_features() and (m_mode=="JT4" or m_mode=="JT65" or
m_mode=="ISCAT" or m_mode=="JT9" or m_mode=="JTMSK" or
m_mode=="MSK144" or m_mode=="QRA");
VHF_features_enabled(b);
VHF_controls_visible(b);
}
m_config.transceiver_online ();
if(!m_bFastMode) setXIT (ui->TxFreqSpinBox->value ());
if(m_config.single_decode() or m_mode=="JT4") {
ui->label_6->setText("Single-Period Decodes");
ui->label_7->setText("Average Decodes");
} else {
ui->label_6->setText("Band Activity");
ui->label_7->setText("Rx Frequency");
}
}
void MainWindow::on_monitorButton_clicked (bool checked)
{
if (!m_transmitting)
{
auto prior = m_monitoring;
monitor (checked);
if (checked && !prior)
{
if (m_config.monitor_last_used ())
{
// put rig back where it was when last in control
m_freqNominal = m_lastMonitoredFrequency;
m_freqTxNominal = m_freqNominal;
if (m_astroWidget) m_astroWidget->nominal_frequency (m_freqNominal, m_freqTxNominal);
setRig ();
setXIT (ui->TxFreqSpinBox->value ());
}
}
//Get Configuration in/out of strict split and mode checking
Q_EMIT m_config.sync_transceiver (true, checked);
}
else
{
ui->monitorButton->setChecked (false); // disallow
}
}
void MainWindow::monitor (bool state)
{
ui->monitorButton->setChecked (state);
if (state) {
m_diskData = false; // no longer reading WAV files
if (!m_monitoring) Q_EMIT resumeAudioInputStream ();
} else {
Q_EMIT suspendAudioInputStream ();
}
m_monitoring = state;
}
void MainWindow::on_actionAbout_triggered() //Display "About"
{
CAboutDlg {this}.exec ();
}
void MainWindow::on_autoButton_clicked (bool checked)
{
m_auto = checked;
statusUpdate ();
m_bEchoTxOK=false;
if(m_auto and (m_mode=="Echo")) {
m_nclearave=1;
echocom_.nsum=0;
}
if(m_mode.startsWith ("WSPR")) {
QPalette palette {ui->sbTxPercent->palette ()};
if(m_auto or m_pctx==0) {
palette.setColor(QPalette::Base,Qt::white);
} else {
palette.setColor(QPalette::Base,Qt::yellow);
}
ui->sbTxPercent->setPalette(palette);
}
}
void MainWindow::auto_tx_mode (bool state)
{
ui->autoButton->setChecked (state);
on_autoButton_clicked (state);
}
void MainWindow::keyPressEvent( QKeyEvent *e ) //keyPressEvent
{
int n;
switch(e->key())
{
case Qt::Key_D:
if(m_mode != "WSPR-2" && e->modifiers() & Qt::ShiftModifier) {
if(!m_decoderBusy) {
dec_data.params.newdat=0;
dec_data.params.nagain=0;
decode();
return;
}
}
break;
case Qt::Key_F4:
clearDX ();
ui->dxCallEntry->setFocus();
return;
case Qt::Key_F6:
if(e->modifiers() & Qt::ShiftModifier) {
on_actionDecode_remaining_files_in_directory_triggered();
return;
}
break;
case Qt::Key_F11:
n=11;
if(e->modifiers() & Qt::ControlModifier) n+=100;
bumpFqso(n);
return;
case Qt::Key_F12:
n=12;
if(e->modifiers() & Qt::ControlModifier) n+=100;
bumpFqso(n);
return;
case Qt::Key_F:
if(e->modifiers() & Qt::ControlModifier) {
if(ui->tabWidget->currentIndex()==0) {
ui->tx5->clearEditText();
ui->tx5->setFocus();
} else {
ui->freeTextMsg->clearEditText();
ui->freeTextMsg->setFocus();
}
return;
}
break;
case Qt::Key_G:
if(e->modifiers() & Qt::AltModifier) {
genStdMsgs(m_rpt);
return;
}
break;
case Qt::Key_H:
if(e->modifiers() & Qt::AltModifier) {
on_stopTxButton_clicked();
return;
}
break;
case Qt::Key_L:
if(e->modifiers() & Qt::ControlModifier) {
lookup();
genStdMsgs(m_rpt);
return;
}
break;
case Qt::Key_V:
if(e->modifiers() & Qt::AltModifier) {
m_fileToSave=m_fname;
return;
}
break;
}
QMainWindow::keyPressEvent (e);
}
void MainWindow::bumpFqso(int n) //bumpFqso()
{
int i;
bool ctrl = (n>=100);
n=n%100;
i=ui->RxFreqSpinBox->value ();
if(n==11) i--;
if(n==12) i++;
if (ui->RxFreqSpinBox->isEnabled ())
{
ui->RxFreqSpinBox->setValue (i);
}
if(ctrl and m_mode.startsWith ("WSPR")) {
ui->WSPRfreqSpinBox->setValue(i);
} else {
if(ctrl && ui->TxFreqSpinBox->isEnabled ()) {
ui->TxFreqSpinBox->setValue (i);
}
}
}
void MainWindow::displayDialFrequency ()
{
Frequency dial_frequency {m_rigState.ptt () && m_rigState.split () ?
m_rigState.tx_frequency () : m_rigState.frequency ()};
// lookup band
auto const& band_name = m_config.bands ()->find (dial_frequency);
if (m_lastBand != band_name)
{
// only change this when necessary as we get called a lot and it
// would trash any user input to the band combo box line edit
ui->bandComboBox->setCurrentText (band_name);
m_wideGraph->setRxBand (band_name);
m_lastBand = band_name;
}
// search working frequencies for one we are within 10kHz of (1 Mhz
// of on VHF and up)
bool valid {false};
quint64 min_offset {99999999};
for (auto const& item : *m_config.frequencies ())
{
// we need to do specific checks for above and below here to
// ensure that we can use unsigned Radio::Frequency since we
// potentially use the full 64-bit unsigned range.
auto const& working_frequency = item.frequency_;
auto const& offset = dial_frequency > working_frequency ?
dial_frequency - working_frequency :
working_frequency - dial_frequency;
if (offset < min_offset) {
min_offset = offset;
}
}
if (min_offset < 10000u || (m_config.enable_VHF_features() && min_offset < 1000000u)) {
valid = true;
}
update_dynamic_property (ui->labDialFreq, "oob", !valid);
ui->labDialFreq->setText (Radio::pretty_frequency_MHz_string (dial_frequency));
}
void MainWindow::statusChanged()
{
statusUpdate ();
QFile f {m_config.temp_dir ().absoluteFilePath ("wsjtx_status.txt")};
if(f.open(QFile::WriteOnly | QIODevice::Text)) {
QTextStream out(&f);
out << qSetRealNumberPrecision (12) << (m_freqNominal / 1.e6)
<< ";" << m_mode << ";" << m_hisCall << ";"
<< ui->rptSpinBox->value() << ";" << m_modeTx << endl;
f.close();
} else {
msgBox("Cannot open \"" + f.fileName () + "\" for writing:" + f.errorString ());
}
}
bool MainWindow::eventFilter(QObject *object, QEvent *event) //eventFilter()
{
if (event->type() == QEvent::KeyPress) {
QKeyEvent *keyEvent = static_cast<QKeyEvent *>(event);
MainWindow::keyPressEvent(keyEvent);
return QObject::eventFilter(object, event);
}
return QObject::eventFilter(object, event);
}
void MainWindow::createStatusBar() //createStatusBar
{
tx_status_label->setAlignment(Qt::AlignHCenter);
tx_status_label->setMinimumSize(QSize(150,18));
tx_status_label->setStyleSheet("QLabel{background-color: #00ff00}");
tx_status_label->setFrameStyle(QFrame::Panel | QFrame::Sunken);
statusBar()->addWidget(tx_status_label);
mode_label->setAlignment(Qt::AlignHCenter);
mode_label->setMinimumSize(QSize(80,18));
mode_label->setFrameStyle(QFrame::Panel | QFrame::Sunken);
statusBar()->addWidget(mode_label);
last_tx_label->setAlignment(Qt::AlignHCenter);
last_tx_label->setMinimumSize(QSize(150,18));
last_tx_label->setFrameStyle(QFrame::Panel | QFrame::Sunken);
statusBar()->addWidget(last_tx_label);
auto_tx_label->setAlignment(Qt::AlignHCenter);
auto_tx_label->setMinimumSize(QSize(150,18));
auto_tx_label->setFrameStyle(QFrame::Panel | QFrame::Sunken);
statusBar()->addWidget(auto_tx_label);
statusBar()->addWidget(progressBar);
progressBar->setFormat("%v/%m");
}
void MainWindow::subProcessFailed (QProcess * process, int exit_code, QProcess::ExitStatus status)
{
if (m_valid && (exit_code || QProcess::NormalExit != status))
{
QStringList arguments;
for (auto argument: process->arguments ())
{
if (argument.contains (' ')) argument = '"' + argument + '"';
arguments << argument;
}
msgBox (tr ("Subprocess failed with exit code %1\nRunning:%2\n%3")
.arg (exit_code)
.arg (process->program () + ' ' + arguments.join (' '))
.arg (QString {process->readAllStandardError()}));
QTimer::singleShot (0, this, SLOT (close ()));
m_valid = false; // ensures exit if still constructing
}
}
void MainWindow::subProcessError (QProcess * process, QProcess::ProcessError)
{
if (m_valid)
{
QStringList arguments;
for (auto argument: process->arguments ())
{
if (argument.contains (' ')) argument = '"' + argument + '"';
arguments << argument;
}
msgBox (tr ("Subprocess error\nRunning: %1\n%2")
.arg (process->program () + ' ' + arguments.join (' '))
.arg (process->errorString ()));
QTimer::singleShot (0, this, SLOT (close ()));
m_valid = false; // ensures exit if still constructing
}
}
void MainWindow::closeEvent(QCloseEvent * e)
{
m_valid = false; // suppresses subprocess errors
m_config.transceiver_offline ();
writeSettings ();
m_guiTimer.stop ();
m_prefixes.reset ();
m_shortcuts.reset ();
m_mouseCmnds.reset ();
killFile ();
mem_jt9->detach();
QFile quitFile {m_config.temp_dir ().absoluteFilePath (".quit")};
quitFile.open(QIODevice::ReadWrite);
QFile {m_config.temp_dir ().absoluteFilePath (".lock")}.remove(); // Allow jt9 to terminate
bool b=proc_jt9.waitForFinished(1000);
if(!b) proc_jt9.close();
quitFile.remove();
Q_EMIT finished ();
QMainWindow::closeEvent (e);
}
void MainWindow::on_stopButton_clicked() //stopButton
{
monitor (false);
m_loopall=false;
if(m_bRefSpec) {
// msgBox("Reference spectrum saved.");
m_bRefSpec=false;
}
}
void MainWindow::msgBox(QString t) //msgBox
{
msgBox0.setText(t);
msgBox0.exec();
}
void MainWindow::on_actionOnline_User_Guide_triggered() //Display manual
{
#if defined (CMAKE_BUILD)
m_manual.display_html_url (QUrl {PROJECT_MANUAL_DIRECTORY_URL}, PROJECT_MANUAL);
#endif
}
//Display local copy of manual
void MainWindow::on_actionLocal_User_Guide_triggered()
{
#if defined (CMAKE_BUILD)
m_manual.display_html_file (m_config.doc_dir (), PROJECT_MANUAL);
#endif
}
void MainWindow::on_actionWide_Waterfall_triggered() //Display Waterfalls
{
m_wideGraph->show();
}
void MainWindow::on_actionEcho_Graph_triggered()
{
m_echoGraph->show();
}
void MainWindow::on_actionFast_Graph_triggered()
{
m_fastGraph->show();
}
void MainWindow::on_actionAstronomical_data_toggled (bool checked)
{
if (checked)
{
m_astroWidget.reset (new Astro {m_settings, &m_config});
// hook up termination signal
connect (this, &MainWindow::finished, m_astroWidget.data (), &Astro::close);
connect (m_astroWidget.data (), &Astro::tracking_update, [this] {
m_astroCorrection = {};
setRig ();
setXIT (ui->TxFreqSpinBox->value ());
displayDialFrequency ();
});
m_astroWidget->showNormal();
m_astroWidget->raise ();
m_astroWidget->activateWindow ();
m_astroWidget->nominal_frequency (m_freqNominal, m_freqTxNominal);
}
else
{
m_astroWidget.reset ();
}
}
void MainWindow::on_actionMessage_averaging_triggered()
{
if (!m_msgAvgWidget)
{
m_msgAvgWidget.reset (new MessageAveraging {m_settings, m_config.decoded_text_font ()});
// Connect signals from Message Averaging window
connect (this, &MainWindow::finished, m_msgAvgWidget.data (), &MessageAveraging::close);
}
m_msgAvgWidget->showNormal();
m_msgAvgWidget->raise ();
m_msgAvgWidget->activateWindow ();
}
void MainWindow::on_actionOpen_triggered() //Open File
{
monitor (false);
QString fname;
fname=QFileDialog::getOpenFileName(this, "Open File", m_path,
"WSJT Files (*.wav)");
if(!fname.isEmpty ()) {
m_path=fname;
int i1=fname.lastIndexOf("/");
QString baseName=fname.mid(i1+1);
tx_status_label->setStyleSheet("QLabel{background-color: #99ffff}");
tx_status_label->setText(" " + baseName + " ");
on_stopButton_clicked();
m_diskData=true;
read_wav_file (fname);
}
}
void MainWindow::read_wav_file (QString const& fname)
{
// call diskDat() when done
m_wav_future_watcher.setFuture (QtConcurrent::run ([this, fname] {
auto basename = fname.mid (fname.lastIndexOf ('/') + 1);
auto pos = fname.indexOf (".wav", 0, Qt::CaseInsensitive);
// global variables and threads do not mix well, this needs changing
dec_data.params.nutc = 0;
if (pos > 0)
{
if (pos == fname.indexOf ('_', -11) + 7)
{
dec_data.params.nutc = fname.mid (pos - 6, 6).toInt ();
}
else
{
dec_data.params.nutc = 100 * fname.mid (pos - 4, 4).toInt ();
}
}
BWFFile file {QAudioFormat {}, fname};
file.open (BWFFile::ReadOnly);
auto bytes_per_frame = file.format ().bytesPerFrame ();
qint64 max_bytes = std::min (std::size_t (m_TRperiod * RX_SAMPLE_RATE),
sizeof (dec_data.d2) / sizeof (dec_data.d2[0]))
* bytes_per_frame;
auto n = file.read (reinterpret_cast<char *> (dec_data.d2),
std::min (max_bytes, file.size ()));
int frames_read = n / bytes_per_frame;
// zero unfilled remaining sample space
std::memset (&dec_data.d2[0] + n, 0, max_bytes - n);
if (11025 == file.format ().sampleRate ())
{
short sample_size = file.format ().sampleSize ();
wav12_ (dec_data.d2, dec_data.d2, &frames_read, &sample_size);
}
dec_data.params.kin = frames_read;
dec_data.params.newdat = 1;
}));
}
void MainWindow::on_actionOpen_next_in_directory_triggered() //Open Next
{
monitor (false);
int i,len;
QFileInfo fi(m_path);
QStringList list;
list= fi.dir().entryList().filter(".wav",Qt::CaseInsensitive);
for (i = 0; i < list.size()-1; ++i) {
if(i==list.size()-2) m_loopall=false;
len=list.at(i).length();
if(list.at(i)==m_path.right(len)) {
int n=m_path.length();
QString fname=m_path.replace(n-len,len,list.at(i+1));
m_path=fname;
int i1=fname.lastIndexOf("/");
QString baseName=fname.mid(i1+1);
tx_status_label->setStyleSheet("QLabel{background-color: #99ffff}");
tx_status_label->setText(" " + baseName + " ");
m_diskData=true;
read_wav_file (fname);
return;
}
}
}
//Open all remaining files
void MainWindow::on_actionDecode_remaining_files_in_directory_triggered()
{
m_loopall=true;
on_actionOpen_next_in_directory_triggered();
}
void MainWindow::diskDat() //diskDat()
{
int k;
int kstep=m_FFTSize;
m_diskData=true;
float db=m_config.degrade();
float bw=m_config.RxBandwidth();
if(db > 0.0) degrade_snr_(dec_data.d2,&dec_data.params.kin,&db,&bw);
for(int n=1; n<=m_hsymStop; n++) { // Do the waterfall spectra
k=(n+1)*kstep;
if(k > dec_data.params.kin) break;
dec_data.params.npts8=k/8;
dataSink(k);
qApp->processEvents(); //Update the waterfall
}
}
//Delete ../save/*.wav
void MainWindow::on_actionDelete_all_wav_files_in_SaveDir_triggered()
{
if (QMessageBox::Yes == QMessageBox::warning(this, "Confirm Delete",
"Are you sure you want to delete all *.wav and *.c2 files in\n" +
QDir::toNativeSeparators(m_config.save_directory ().absolutePath ()) + " ?",
QMessageBox::Yes | QMessageBox::No, QMessageBox::Yes)) {
Q_FOREACH (auto const& file
, m_config.save_directory ().entryList ({"*.wav", "*.c2"}, QDir::Files | QDir::Writable)) {
m_config.save_directory ().remove (file);
}
}
}
void MainWindow::on_actionNone_triggered() //Save None
{
m_saveDecoded=false;
m_saveAll=false;
ui->actionNone->setChecked(true);
}
void MainWindow::on_actionSave_decoded_triggered()
{
m_saveDecoded=true;
m_saveAll=false;
ui->actionSave_decoded->setChecked(true);
}
void MainWindow::on_actionSave_all_triggered() //Save All
{
m_saveDecoded=false;
m_saveAll=true;
ui->actionSave_all->setChecked(true);
}
void MainWindow::on_actionKeyboard_shortcuts_triggered()
{
if (!m_shortcuts)
{
QFont font;
font.setPointSize (10);
m_shortcuts.reset (new HelpTextWindow {tr ("Keyboard Shortcuts")
, ":/shortcuts.txt", font});
}
m_shortcuts->showNormal ();
m_shortcuts->raise ();
}
void MainWindow::on_actionSpecial_mouse_commands_triggered()
{
if (!m_mouseCmnds)
{
QFont font;
font.setPointSize (10);
m_mouseCmnds.reset (new HelpTextWindow {tr ("Special Mouse Commands")
, ":/mouse_commands.txt", font});
}
m_mouseCmnds->showNormal ();
m_mouseCmnds->raise ();
}
void MainWindow::on_DecodeButton_clicked (bool /* checked */) //Decode request
{
if(!m_mode.startsWith ("WSPR") && !m_decoderBusy) {
dec_data.params.newdat=0;
dec_data.params.nagain=1;
m_blankLine=false; // don't insert the separator again
decode();
}
}
void MainWindow::freezeDecode(int n) //freezeDecode()
{
if((n%100)==2) on_DecodeButton_clicked (true);
}
void MainWindow::on_ClrAvgButton_clicked()
{
m_nclearave=1;
if(m_msgAvgWidget != NULL) {
if(m_msgAvgWidget->isVisible()) m_msgAvgWidget->displayAvg("");
}
}
void MainWindow::msgAvgDecode2()
{
on_DecodeButton_clicked (true);
}
void MainWindow::decode() //decode()
{
if(!m_dataAvailable or m_TRperiod==0) return;
ui->DecodeButton->setChecked (true);
if(dec_data.params.nagain==0 && m_diskData && !m_bFastMode) {
dec_data.params.nutc=dec_data.params.nutc/100;
}
if(dec_data.params.nagain==0 && dec_data.params.newdat==1 && (!m_diskData)) {
qint64 ms = QDateTime::currentMSecsSinceEpoch() % 86400000;
int imin=ms/60000;
int ihr=imin/60;
imin=imin % 60;
if(m_TRperiod>=60) imin=imin - (imin % (m_TRperiod/60));
dec_data.params.nutc=100*ihr + imin;
if(m_mode=="ISCAT" or m_bFast9) {
QDateTime t=QDateTime::currentDateTimeUtc().addSecs(2-m_TRperiod);
ihr=t.toString("hh").toInt();
imin=t.toString("mm").toInt();
int isec=t.toString("ss").toInt();
isec=isec - isec%m_TRperiod;
dec_data.params.nutc=10000*ihr + 100*imin + isec;
}
}
dec_data.params.nfqso=m_wideGraph->rxFreq();
qint32 depth {m_ndepth};
if (!ui->actionInclude_averaging->isEnabled ()) depth &= ~16;
if (!ui->actionInclude_correlation->isEnabled ()) depth &= ~32;
dec_data.params.ndepth=depth;
dec_data.params.n2pass=1;
if(m_config.twoPass()) dec_data.params.n2pass=2;
dec_data.params.nranera=m_config.ntrials();
dec_data.params.naggressive=m_config.aggressive();
dec_data.params.nrobust=0;
if(m_config.sync1Bit()) dec_data.params.nrobust=1;
dec_data.params.ndiskdat=0;
if(m_diskData) dec_data.params.ndiskdat=1;
dec_data.params.nfa=m_wideGraph->nStartFreq();
dec_data.params.nfSplit=m_wideGraph->Fmin();
dec_data.params.nfb=m_wideGraph->Fmax();
dec_data.params.ntol=m_Ftol;
if(m_mode=="JT9+JT65") {
dec_data.params.ntol=20;
dec_data.params.naggressive=0;
}
if(dec_data.params.nutc < m_nutc0) m_RxLog = 1; //Date and Time to all.txt
m_nutc0=dec_data.params.nutc;
dec_data.params.ntxmode=9;
if(m_modeTx=="JT65") dec_data.params.ntxmode=65;
dec_data.params.nmode=9;
if(m_mode=="JT65" or m_mode=="QRA") dec_data.params.nmode=65;
if(m_mode=="JT9+JT65") dec_data.params.nmode=9+65; // = 74
if(m_mode=="JT4") {
dec_data.params.nmode=4;
dec_data.params.ntxmode=4;
}
dec_data.params.ntrperiod=m_TRperiod;
dec_data.params.nsubmode=m_nSubMode;
dec_data.params.minw=0;
dec_data.params.nclearave=m_nclearave;
if(m_nclearave!=0) {
QFile f(m_config.temp_dir ().absoluteFilePath ("avemsg.txt"));
f.remove();
}
dec_data.params.dttol=m_DTtol;
dec_data.params.emedelay=0.0;
if(m_bEME) dec_data.params.emedelay=2.5;
dec_data.params.minSync=ui->syncSpinBox->isVisible () ? m_minSync : 0;
dec_data.params.nexp_decode=0;
if(m_config.MyDx()) dec_data.params.nexp_decode += 1;
if(m_config.CQMyN()) dec_data.params.nexp_decode += 2;
if(m_config.NDxG()) dec_data.params.nexp_decode += 4;
if(m_config.NN()) dec_data.params.nexp_decode += 8;
if(m_config.EMEonly()) dec_data.params.nexp_decode += 16;
if(m_config.single_decode()) {
dec_data.params.nexp_decode += 32;
if(dec_data.params.naggressive<1) dec_data.params.naggressive=1;
}
strncpy(dec_data.params.datetime, m_dateTime.toLatin1(), 20);
strncpy(dec_data.params.mycall, (m_config.my_callsign()+" ").toLatin1(),12);
strncpy(dec_data.params.mygrid, (m_config.my_grid()+" ").toLatin1(),6);
QString hisCall=ui->dxCallEntry->text().toUpper().trimmed();
QString hisGrid=ui->dxGridEntry->text().toUpper().trimmed();
strncpy(dec_data.params.hiscall,(hisCall+" ").toLatin1(),12);
strncpy(dec_data.params.hisgrid,(hisGrid+" ").toLatin1(),6);
//newdat=1 ==> this is new data, must do the big FFT
//nagain=1 ==> decode only at fQSO +/- Tol
char *to = (char*)mem_jt9->data();
char *from = (char*) dec_data.ss;
int size=sizeof(struct dec_data);
if(dec_data.params.newdat==0) {
int noffset {offsetof (struct dec_data, params.nutc)};
to += noffset;
from += noffset;
size -= noffset;
}
if(m_mode=="ISCAT" or m_mode=="JTMSK" or m_mode=="MSK144" or m_bFast9) {
float t0=m_t0;
float t1=m_t1;
qApp->processEvents(); //Update the waterfall
if(m_nPick > 0) {
t0=m_t0Pick;
t1=m_t1Pick;
if(t1 > m_kdone/12000.0) t1=m_kdone/12000.0;
}
static short int d2b[360000];
narg[0]=dec_data.params.nutc;
if(m_kdone>12000*m_TRperiod) {
m_kdone=12000*m_TRperiod;
}
narg[1]=m_kdone;
narg[2]=m_nSubMode;
narg[3]=dec_data.params.newdat;
narg[4]=dec_data.params.minSync;
narg[5]=m_nPick;
narg[6]=1000.0*t0;
narg[7]=1000.0*t1;
narg[8]=2; //Max decode lines per decode attempt
if(dec_data.params.minSync<0) narg[8]=50;
if(m_mode=="ISCAT") narg[9]=101; //ISCAT
if(m_mode=="JT9") narg[9]=102; //Fast JT9
if(m_mode=="JTMSK") narg[9]=103; //JTMSK
if(m_mode=="MSK144") narg[9]=104; //MSK144
narg[10]=ui->RxFreqSpinBox->value();
narg[11]=m_Ftol;
m_calls="<" + m_config.my_callsign() + " " + hisCall + ">";
hash_calls_(m_calls.toLatin1().data(), &narg[12], m_calls.length());
narg[13]=-1;
narg[14]=m_config.aggressive();
memcpy(d2b,dec_data.d2,2*360000);
watcher3.setFuture (QtConcurrent::run (std::bind (fast_decode_,&d2b[0],&narg[0],&m_msg[0][0],
&m_pchkFile[0],80,512)));
} else {
memcpy(to, from, qMin(mem_jt9->size(), size));
QFile {m_config.temp_dir ().absoluteFilePath (".lock")}.remove (); // Allow jt9 to start
decodeBusy(true);
}
}
void::MainWindow::fast_decode_done()
{
float t,tmax=-99.0;
QString msg0;
m_bDecoded=false;
for(int i=0; i<100; i++) {
int i1=msg0.indexOf(m_baseCall);
int i2=msg0.indexOf(m_hisCall);
if((m_mode=="JTMSK" or m_mode=="MSK144" or m_bFast9) and m_bEME and tmax>=0.0 and
i1>10 and i2>i1+3) { //Here, "m_bEME" implies AutoSeq
processMessage(msg0,40,false);
}
if(m_msg[i][0]==0) break;
QString message=QString::fromLatin1(m_msg[i]);
if(message.length()>80) message=message.mid(0,80);
if(narg[13]/8==narg[12]) message=message.trimmed().replace("<...>",m_calls);
//Left (Band activity) window
DecodedText decodedtext;
decodedtext=message.replace("\n","");
ui->decodedTextBrowser->displayDecodedText (decodedtext,m_baseCall,m_config.DXCC(),
m_logBook,m_config.color_CQ(),m_config.color_MyCall(),m_config.color_DXCC(),
m_config.color_NewCall());
t=message.mid(10,5).toFloat();
if(t>tmax) {
msg0=message;
tmax=t;
m_bDecoded=true;
}
// Write decoded text to file "ALL.TXT".
QFile f {m_dataDir.absoluteFilePath ("ALL.TXT")};
if (f.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Append)) {
QTextStream out(&f);
if(m_RxLog==1) {
out << QDateTime::currentDateTimeUtc().toString("yyyy-MMM-dd hh:mm")
<< " " << qSetRealNumberPrecision (12) << (m_freqNominal / 1.e6) << " MHz "
<< m_mode << endl;
m_RxLog=0;
}
int n=message.length();
out << message.mid(0,n-2) << endl;
f.close();
} else {
msgBox("Cannot open \"" + f.fileName () + "\" for append:" + f.errorString ());
}
if(m_mode=="JT9" or m_mode=="JTMSK" or m_mode=="MSK144") {
// find and extract any report for myCall
QString msg=message.mid(0,4) + message.mid(6,-1);
decodedtext=msg.replace("\n","");
bool stdMsg = decodedtext.report(m_baseCall,
Radio::base_callsign(ui->dxCallEntry->text().toUpper().trimmed()), m_rptRcvd);
// extract details and send to PSKreporter
if(m_config.spot_to_psk_reporter() and stdMsg and !m_diskData) {
QString msgmode="JT9";
QString deCall;
QString grid;
decodedtext.deCallAndGrid(/*out*/deCall,grid);
int audioFrequency = decodedtext.frequencyOffset();
int snr = decodedtext.snr();
Frequency frequency = m_freqNominal + audioFrequency;
pskSetLocal();
if(gridOK(grid))
{
// qDebug() << "To PSKreporter:" << deCall << grid << frequency << msgmode << snr;
psk_Reporter->addRemoteStation(deCall,grid,QString::number(frequency),msgmode,
QString::number(snr),
QString::number(QDateTime::currentDateTime().toTime_t()));
}
}
}
}
m_startAnother=m_loopall;
m_nPick=0;
ui->DecodeButton->setChecked (false);
}
void MainWindow::decodeDone ()
{
dec_data.params.nagain=0;
dec_data.params.ndiskdat=0;
m_nclearave=0;
QFile {m_config.temp_dir ().absoluteFilePath (".lock")}.open(QIODevice::ReadWrite);
ui->DecodeButton->setChecked (false);
decodeBusy(false);
m_RxLog=0;
m_blankLine=true;
}
void MainWindow::readFromStdout() //readFromStdout
{
while(proc_jt9.canReadLine()) {
QByteArray t=proc_jt9.readLine();
bool bAvgMsg=false;
int navg=0;
if(m_mode=="JT4" or m_mode=="JT65" or m_mode=="QRA") {
int n=t.indexOf("f");
if(n<0) n=t.indexOf("d");
if(n>0) {
QString tt=t.mid(n+1,1);
navg=tt.toInt();
if(navg==0) {
char c = tt.data()->toLatin1();
if(int(c)>=65 and int(c)<=90) navg=int(c)-54;
}
if(navg>1 or t.indexOf("f*")>0) bAvgMsg=true;
}
}
if(t.indexOf("<DecodeFinished>") >= 0) {
m_bDecoded = t.mid (20).trimmed ().toInt () > 0;
if(!m_diskData) killFileTimer.start (3*1000*m_TRperiod/4); //Kill in 45 s
decodeDone ();
m_startAnother=m_loopall;
return;
} else {
QFile f {m_dataDir.absoluteFilePath ("ALL.TXT")};
if (f.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Append)) {
QTextStream out(&f);
if(m_RxLog==1) {
out << QDateTime::currentDateTimeUtc().toString("yyyy-MMM-dd hh:mm")
<< " " << qSetRealNumberPrecision (12) << (m_freqNominal / 1.e6) << " MHz "
<< m_mode << endl;
m_RxLog=0;
}
int n=t.length();
out << t.mid(0,n-2) << endl;
f.close();
} else {
msgBox("Cannot open \"" + f.fileName () + "\" for append:" + f.errorString ());
}
if (m_config.insert_blank () && m_blankLine)
{
QString band;
if (QDateTime::currentMSecsSinceEpoch() / 1000 - m_secBandChanged > 50)
{
band = ' ' + m_config.bands ()->find (m_freqNominal);
}
ui->decodedTextBrowser->insertLineSpacer (band.rightJustified (40, '-'));
m_blankLine = false;
}
DecodedText decodedtext;
decodedtext = t.replace("\n",""); //t.replace("\n","").mid(0,t.length()-4);
//Left (Band activity) window
if(!bAvgMsg) {
ui->decodedTextBrowser->displayDecodedText (decodedtext
, m_baseCall
, m_config.DXCC ()
, m_logBook
, m_config.color_CQ()
, m_config.color_MyCall()
, m_config.color_DXCC()
, m_config.color_NewCall());
}
//Right (Rx Frequency) window
bool bDisplayRight=bAvgMsg;
if(!m_config.single_decode() and m_mode!="JT4" and
(abs(decodedtext.frequencyOffset() - m_wideGraph->rxFreq()) <= 10)) bDisplayRight=true;
if (bDisplayRight) {
// This msg is within 10 hertz of our tuned frequency, or a JT4 avg
ui->decodedTextBrowser2->displayDecodedText(decodedtext
, m_baseCall
, false
, m_logBook
, m_config.color_CQ()
, m_config.color_MyCall()
, m_config.color_DXCC()
, m_config.color_NewCall());
if(m_mode!="JT4") {
bool b65=decodedtext.isJT65();
if(b65 and m_modeTx!="JT65") on_pbTxMode_clicked();
if(!b65 and m_modeTx=="JT65") on_pbTxMode_clicked();
}
m_QSOText=decodedtext;
}
postDecode (true, decodedtext.string ());
// find and extract any report for myCall
bool stdMsg = decodedtext.report(m_baseCall,
Radio::base_callsign(ui->dxCallEntry->text().toUpper().trimmed()), m_rptRcvd);
// extract details and send to PSKreporter
int nsec=QDateTime::currentMSecsSinceEpoch()/1000-m_secBandChanged;
bool okToPost=(nsec>50);
if(m_config.spot_to_psk_reporter () and stdMsg and !m_diskData and okToPost) {
QString msgmode="JT9";
if (decodedtext.isJT65()) msgmode="JT65";
QString deCall;
QString grid;
decodedtext.deCallAndGrid(/*out*/deCall,grid);
int audioFrequency = decodedtext.frequencyOffset();
int snr = decodedtext.snr();
Frequency frequency = m_freqNominal + audioFrequency;
pskSetLocal ();
if(gridOK(grid))
{
// qDebug() << "To PSKreporter:" << deCall << grid << frequency << msgmode << snr;
psk_Reporter->addRemoteStation(deCall,grid,QString::number(frequency),msgmode,
QString::number(snr),
QString::number(QDateTime::currentDateTime().toTime_t()));
}
}
if((m_mode=="JT4" or m_mode=="JT65" or m_mode=="QRA") and m_msgAvgWidget!=NULL) {
if(m_msgAvgWidget->isVisible()) {
QFile f(m_config.temp_dir ().absoluteFilePath ("avemsg.txt"));
if(f.open(QIODevice::ReadOnly | QIODevice::Text)) {
QTextStream s(&f);
QString t=s.readAll();
m_msgAvgWidget->displayAvg(t);
}
}
}
}
}
}
void MainWindow::killFile ()
{
QString f=m_fname;
if(m_bFastMode) f=m_fileToKill;
if (!m_fname.isEmpty() &&
!(m_saveAll || (m_saveDecoded && m_bDecoded) || m_fname == m_fileToSave)) {
if(m_fname.indexOf(".wav")<0) f+= ".wav";
QFile f1{f};
if(f1.exists()) f1.remove();
if(m_mode.startsWith ("WSPR")) {
QFile f2{m_fname + ".c2"};
if(f2.exists()) f2.remove();
}
}
}
void MainWindow::on_EraseButton_clicked() //Erase
{
qint64 ms=QDateTime::currentMSecsSinceEpoch();
ui->decodedTextBrowser2->clear();
if(m_mode.startsWith ("WSPR") or m_mode=="Echo" or m_mode=="ISCAT") {
ui->decodedTextBrowser->clear();
} else {
m_QSOText.clear();
if((ms-m_msErase)<500) {
ui->decodedTextBrowser->clear();
m_messageClient->clear_decodes ();
QFile f(m_config.temp_dir ().absoluteFilePath ("decoded.txt"));
if(f.exists()) f.remove();
}
}
m_msErase=ms;
}
void MainWindow::decodeBusy(bool b) //decodeBusy()
{
/* ### Temporarily(?) disable the long-decode progress bar.
bool showProgress = false;
if (b && m_firstDecode < 65 && ("JT65" == m_mode || "JT9+JT65" == m_mode))
{
m_firstDecode += 65;
if ("JT9+JT65" == m_mode) m_firstDecode = 65 + 9;
showProgress = true;
}
if (b && m_firstDecode != 9 && m_firstDecode != 65 + 9 &&
("JT9" == m_mode))
{
m_firstDecode += 9;
showProgress = true;
}
if (showProgress)
{
// this sequence is needed to create an indeterminate progress
// bar
m_optimizingProgress.setRange (0, 1);
m_optimizingProgress.setValue (0);
m_optimizingProgress.setRange (0, 0);
}
### */
if (!b)
{
m_optimizingProgress.reset ();
}
m_decoderBusy=b;
ui->DecodeButton->setEnabled(!b);
ui->actionOpen->setEnabled(!b);
ui->actionOpen_next_in_directory->setEnabled(!b);
ui->actionDecode_remaining_files_in_directory->setEnabled(!b);
statusUpdate ();
}
//------------------------------------------------------------- //guiUpdate()
void MainWindow::guiUpdate()
{
static char message[29];
static char msgsent[29];
double txDuration;
QString rt;
if(m_TRperiod==0) m_TRperiod=60;
txDuration=0.0;
if(m_modeTx=="JT4") txDuration=1.0 + 207.0*2520/11025.0; // JT4
if(m_modeTx=="JT9") txDuration=1.0 + 85.0*m_nsps/12000.0; // JT9
if(m_modeTx=="JT65" or m_mode=="QRA") txDuration=1.0 + 126*4096/11025.0; // JT65 or QRA
if(m_mode=="WSPR-2") txDuration=2.0 + 162*8192/12000.0; // WSPR
if(m_mode=="ISCAT" or m_mode=="JTMSK" or m_mode=="MSK144" or m_bFast9) {
txDuration=m_TRperiod-0.25; // ISCAT, JT9-fast, JTMSK, MSK144
}
//### if(m_mode=="WSPR-15") tx2=...
double tx1=0.0;
double tx2=txDuration + + icw[0]*2560.0/48000.0; //Full length including CW ID
if(!m_txFirst and !m_mode.startsWith ("WSPR")) {
tx1 += m_TRperiod;
tx2 += m_TRperiod;
}
qint64 ms = QDateTime::currentMSecsSinceEpoch() % 86400000;
int nsec=ms/1000;
double tsec=0.001*ms;
double t2p=fmod(tsec,2*m_TRperiod);
m_s6=fmod(tsec,6.0);
m_nseq = nsec % m_TRperiod;
m_tRemaining=m_TRperiod - fmod(tsec,double(m_TRperiod));
if(m_mode=="Echo") {
txDuration=2.5;
tx1=0.0;
tx2=txDuration;
if(m_auto and m_s6>4.0) m_bEchoTxOK=true;
if(m_transmitting) m_bEchoTxed=true;
}
if(m_mode.startsWith ("WSPR")) {
if(m_nseq==0 and m_ntr==0) { //Decide whether to Tx or Rx
m_tuneup=false; //This is not an ATU tuneup
if(m_pctx==0) m_WSPR_tx_next = false; //Don't transmit if m_pctx=0
bool btx = m_auto && m_WSPR_tx_next; // To Tx, we need m_auto and
// scheduled transmit
if(m_auto and m_txNext) btx=true; //TxNext button overrides
if(m_auto and m_pctx==100) btx=true; //Always transmit
if(btx) {
m_ntr=-1; //This says we will have transmitted
m_txNext=false;
ui->pbTxNext->setChecked(false);
m_bTxTime=true; //Start a WSPR Tx sequence
} else {
// This will be a WSPR Rx sequence.
m_ntr=1; //This says we will have received
m_bTxTime=false; //Start a WSPR Rx sequence
}
}
} else {
// For all modes other than WSPR
m_bTxTime = (t2p >= tx1) and (t2p < tx2);
if(m_mode=="Echo") m_bTxTime = m_bTxTime and m_bEchoTxOK;
}
if(m_tune) m_bTxTime=true; //"Tune" takes precedence
if(m_transmitting or m_auto or m_tune) {
// Check for "txboth" (testing purposes only)
QFile f(m_appDir + "/txboth");
if(f.exists() and
fmod(tsec,m_TRperiod)<(1.0 + 85.0*m_nsps/12000.0)) m_bTxTime=true;
// Don't transmit another mode in the 30 m WSPR sub-band
Frequency onAirFreq = m_freqNominal + ui->TxFreqSpinBox->value();
if ((onAirFreq > 10139900 and onAirFreq < 10140320) and
!m_mode.startsWith ("WSPR")) {
m_bTxTime=false;
// if (m_tune) stop_tuning ();
if (m_auto) auto_tx_mode (false);
if(onAirFreq!=m_onAirFreq0) {
m_onAirFreq0=onAirFreq;
QString t="Please choose another Tx frequency.\n";
t+="WSJT-X will not knowingly transmit another\n";
t+="mode in the WSPR sub-band on 30 m.";
msgBox(t);
}
}
float fTR=float((nsec%m_TRperiod))/m_TRperiod;
// if(g_iptt==0 and ((m_bTxTime and fTR<0.4) or m_tune )) {
if(g_iptt==0 and ((m_bTxTime and fTR<99) or m_tune )) { //### Allow late starts
icw[0]=m_ncw;
g_iptt = 1;
setRig ();
setXIT (ui->TxFreqSpinBox->value ());
// If "CQ nnn ..." feature is active, set the proper Tx frequency
if(m_config.offsetRxFreq() && ui->cbCQRx->isChecked() &&
(m_monitoring || m_transmitting) && m_config.is_transceiver_online ()
&& m_config.split_mode ()) {
// All conditions are met, reset the transceiver Tx frequency:
Frequency tx_frequency {6 == m_ntx ? m_callingFrequency :
m_freqTxNominal / 1000000 * 1000000 + 1000 * m_freqCQ + m_XIT};
Q_EMIT m_config.transceiver_tx_frequency (tx_frequency);
}
Q_EMIT m_config.transceiver_ptt (true); //Assert the PTT
ptt1Timer.start(200); //Sequencer delay
}
if(!m_bTxTime and !m_tune) m_btxok=false; //Time to stop transmitting
}
if(m_mode.startsWith ("WSPR") and
((m_ntr==1 and m_rxDone) or (m_ntr==-1 and m_nseq>tx2))) {
if(m_monitoring) {
m_rxDone=false;
}
if(m_transmitting) {
WSPR_history(m_freqNominal,-1);
m_bTxTime=false; //Time to stop a WSPR transmission
m_btxok=false;
}
else if (m_ntr != -1) {
WSPR_scheduling ();
m_ntr=0; //This WSPR Rx sequence is complete
}
}
// Calculate Tx tones when needed
if((g_iptt==1 && m_iptt0==0) || m_restart) {
//----------------------------------------------------------------------
QByteArray ba;
if(m_mode.startsWith ("WSPR")) {
QString sdBm,msg0,msg1,msg2;
sdBm.sprintf(" %d",m_dBm);
m_tx=1-m_tx;
int i2=m_config.my_callsign().indexOf("/");
if(i2>0 or m_grid6) {
if(i2<0) { // "Type 2" WSPR message
msg1=m_config.my_callsign() + " " + m_config.my_grid().mid(0,4) + sdBm;
} else {
msg1=m_config.my_callsign() + sdBm;
}
msg0="<" + m_config.my_callsign() + "> " + m_config.my_grid()+ sdBm;
if(m_tx==0) msg2=msg0;
if(m_tx==1) msg2=msg1;
} else {
msg2=m_config.my_callsign() + " " + m_config.my_grid().mid(0,4) + sdBm; // Normal WSPR message
}
ba=msg2.toLatin1();
} else {
if(m_ntx == 1) ba=ui->tx1->text().toLocal8Bit();
if(m_ntx == 2) ba=ui->tx2->text().toLocal8Bit();
if(m_ntx == 3) ba=ui->tx3->text().toLocal8Bit();
if(m_ntx == 4) ba=ui->tx4->text().toLocal8Bit();
if(m_ntx == 5) ba=ui->tx5->currentText().toLocal8Bit();
if(m_ntx == 6) ba=ui->tx6->text().toLocal8Bit();
if(m_ntx == 7) ba=ui->genMsg->text().toLocal8Bit();
if(m_ntx == 8) ba=ui->freeTextMsg->currentText().toLocal8Bit();
}
ba2msg(ba,message);
int ichk=0;
if (m_lastMessageSent != m_currentMessage
|| m_lastMessageType != m_currentMessageType)
{
m_lastMessageSent = m_currentMessage;
m_lastMessageType = m_currentMessageType;
}
m_currentMessageType = 0;
if(m_tune or m_mode=="Echo") {
itone[0]=0;
} else {
if(m_mode=="ISCAT") {
int len2=28;
geniscat_(message, msgsent, const_cast<int *> (itone),len2, len2);
msgsent[28]=0;
} else {
int len1=22;
if(m_modeTx=="JT4") gen4_(message, &ichk , msgsent, const_cast<int *> (itone),
&m_currentMessageType, len1, len1);
if(m_modeTx=="JT9") gen9_(message, &ichk, msgsent, const_cast<int *> (itone),
&m_currentMessageType, len1, len1);
if(m_modeTx=="JT65") gen65_(message, &ichk, msgsent, const_cast<int *> (itone),
&m_currentMessageType, len1, len1);
//###
// To be changed!
if(m_modeTx=="QRA") gen65_(message, &ichk, msgsent, const_cast<int *> (itone),
&m_currentMessageType, len1, len1);
//###
if(m_mode.startsWith ("WSPR")) genwspr_(message, msgsent, const_cast<int *> (itone),
len1, len1);
if(m_modeTx=="JTMSK") genmsk_(message, &ichk, msgsent, const_cast<int *> (itone),
&m_currentMessageType, len1, len1);
if(m_modeTx=="MSK144") genmsk144_(message, &ichk, msgsent, const_cast<int *> (itone),
&m_currentMessageType, &m_pchkFile[0], len1, len1, 512);
msgsent[22]=0;
}
}
m_currentMessage = QString::fromLatin1(msgsent);
if (m_tune)
{
m_currentMessage = "TUNE";
m_currentMessageType = -1;
}
last_tx_label->setText("Last Tx: " + m_currentMessage);
if(m_restart) {
QFile f {m_dataDir.absoluteFilePath ("ALL.TXT")};
if (f.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Append))
{
QTextStream out(&f);
out << QDateTime::currentDateTimeUtc().toString("hhmm")
<< " Transmitting " << qSetRealNumberPrecision (12) << (m_freqNominal / 1.e6)
<< " MHz " << m_modeTx
<< ": " << m_currentMessage << endl;
f.close();
}
else
{
msgBox("Cannot open \"" + f.fileName () + "\" for append:" + f.errorString ());
}
if (m_config.TX_messages ())
{
ui->decodedTextBrowser2->displayTransmittedText(m_currentMessage,m_modeTx,
ui->TxFreqSpinBox->value(),m_config.color_TxMsg(),m_bFastMode);
}
}
auto t2 = QDateTime::currentDateTimeUtc ().toString ("hhmm");
icw[0] = 0;
auto msg_parts = m_currentMessage.split (' ', QString::SkipEmptyParts);
auto is_73 = message_is_73 (m_currentMessageType, msg_parts);
m_sentFirst73 = is_73
&& !message_is_73 (m_lastMessageType, m_lastMessageSent.split (' ', QString::SkipEmptyParts));
if (m_sentFirst73) {
m_qsoStop=t2;
if(m_config.id_after_73 () and (!m_bFastMode)) {
icw[0] = m_ncw;
}
if (m_config.prompt_to_log () && !m_tune) {
logQSOTimer.start (0);
}
}
if (is_73 && m_config.disable_TX_on_73 ()) {
auto_tx_mode (false);
}
if(m_config.id_interval () >0 and (!m_bFastMode)) {
int nmin=(m_sec0-m_secID)/60;
if(nmin >= m_config.id_interval ()) {
icw[0]=m_ncw;
m_secID=m_sec0;
}
}
if (m_currentMessageType < 6 && msg_parts.length() >= 3
&& (msg_parts[1] == m_config.my_callsign () ||
msg_parts[1] == m_baseCall))
{
int i1;
bool ok;
i1 = msg_parts[2].toInt(&ok);
if(ok and i1>=-50 and i1<50)
{
m_rptSent = msg_parts[2];
m_qsoStart = t2;
} else {
if (msg_parts[2].mid (0, 1) == "R")
{
i1 = msg_parts[2].mid (1).toInt (&ok);
if (ok and i1 >= -50 and i1 < 50)
{
m_rptSent = msg_parts[2].mid (1);
m_qsoStart = t2;
}
}
}
}
m_restart=false;
//----------------------------------------------------------------------
} else {
if (!m_auto && m_sentFirst73)
{
m_sentFirst73 = false;
if (1 == ui->tabWidget->currentIndex())
{
ui->genMsg->setText(ui->tx6->text());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
} else {
//JHT 11/29/2015 m_ntx=6;
// ui->txrb6->setChecked(true);
}
}
}
if (g_iptt == 1 && m_iptt0 == 0)
{
QString t=QString::fromLatin1(msgsent);
if(t==m_msgSent0) {
m_repeatMsg++;
} else {
m_repeatMsg=0;
m_msgSent0=t;
}
if(!m_tune) {
QFile f {m_dataDir.absoluteFilePath ("ALL.TXT")};
if (f.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Append)) {
QTextStream out(&f);
out << QDateTime::currentDateTimeUtc().toString("hhmm")
<< " Transmitting " << qSetRealNumberPrecision (12) << (m_freqNominal / 1.e6) << " MHz "
<< m_modeTx
<< ": " << m_currentMessage << endl;
f.close();
} else {
msgBox("Cannot open \"" + f.fileName () + "\" for append:" +
f.errorString ());
}
}
if (m_config.TX_messages () && !m_tune) {
ui->decodedTextBrowser2->displayTransmittedText(t,m_modeTx,
ui->TxFreqSpinBox->value(),m_config.color_TxMsg(),m_bFastMode);
}
m_transmitting = true;
transmitDisplay (true);
statusUpdate ();
}
if(!m_btxok && m_btxok0 && g_iptt==1) stopTx();
if(m_startAnother) {
m_startAnother=false;
on_actionOpen_next_in_directory_triggered();
}
//Once per second:
if(nsec != m_sec0) {
g_single_decode=m_config.single_decode();
if(m_auto and m_mode=="Echo" and m_bEchoTxOK) {
progressBar->setMaximum(6);
progressBar->setValue(int(m_s6));
}
if(m_mode!="Echo") {
if(m_monitoring or m_transmitting) {
progressBar->setMaximum(m_TRperiod);
int isec=int(fmod(tsec,m_TRperiod));
progressBar->setValue(isec);
} else {
progressBar->setValue(0);
}
}
astroUpdate ();
if(m_transmitting) {
char s[37];
sprintf(s,"Tx: %s",msgsent);
m_nsendingsh=0;
if(s[4]==64) m_nsendingsh=1;
if(m_nsendingsh==1 or m_currentMessageType==7) {
tx_status_label->setStyleSheet("QLabel{background-color: #66ffff}");
} else if(m_nsendingsh==-1 or m_currentMessageType==6) {
tx_status_label->setStyleSheet("QLabel{background-color: #ffccff}");
} else {
tx_status_label->setStyleSheet("QLabel{background-color: #ffff33}");
}
if(m_tune) {
tx_status_label->setText("Tx: TUNE");
} else {
if(m_mode=="Echo") {
tx_status_label->setText("Tx: ECHO");
} else {
tx_status_label->setText(s);
}
}
} else if(m_monitoring) {
tx_status_label->setStyleSheet("QLabel{background-color: #00ff00}");
QString t="Receiving ";
tx_status_label->setText(t);
transmitDisplay(false);
} else if (!m_diskData) {
tx_status_label->setStyleSheet("");
tx_status_label->setText("");
}
QDateTime t = QDateTime::currentDateTimeUtc();
QString utc = t.date().toString("yyyy MMM dd") + "\n " +
t.time().toString() + " ";
ui->labUTC->setText(utc);
if(!m_monitoring and !m_diskData) {
ui->signal_meter_widget->setValue(0);
}
m_sec0=nsec;
displayDialFrequency ();
}
m_iptt0=g_iptt;
m_btxok0=m_btxok;
} //End of GUIupdate
void MainWindow::startTx2()
{
if (!m_modulator->isActive ()) { // TODO - not thread safe
double fSpread=0.0;
double snr=99.0;
QString t=ui->tx5->currentText();
if(t.mid(0,1)=="#") fSpread=t.mid(1,5).toDouble();
m_modulator->setSpread(fSpread); // TODO - not thread safe
t=ui->tx6->text();
if(t.mid(0,1)=="#") snr=t.mid(1,5).toDouble();
if(snr>0.0 or snr < -50.0) snr=99.0;
transmit (snr);
ui->signal_meter_widget->setValue(0);
if(m_mode=="Echo" and !m_tune) m_bTransmittedEcho=true;
if(m_mode.startsWith ("WSPR") and !m_tune) {
if (m_config.TX_messages ()) {
t = " Transmitting " + m_mode + " ----------------------- " +
m_config.bands ()->find (m_freqNominal);
t=WSPR_hhmm(0) + ' ' + t.rightJustified (66, '-');
ui->decodedTextBrowser->appendText(t);
}
QFile f {m_dataDir.absoluteFilePath ("ALL_WSPR.TXT")};
if (f.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Append)) {
QTextStream out(&f);
out << QDateTime::currentDateTimeUtc().toString("yyMMdd hhmm")
<< " Transmitting " << qSetRealNumberPrecision (12) << (m_freqNominal / 1.e6) << " MHz: "
<< m_currentMessage << " " + m_mode << endl;
f.close();
} else {
msgBox("Cannot open \"" + f.fileName () + "\" for append:" + f.errorString ());
}
}
}
}
void MainWindow::stopTx()
{
Q_EMIT endTransmitMessage ();
m_btxok = false;
m_transmitting = false;
g_iptt=0;
tx_status_label->setStyleSheet("");
tx_status_label->setText("");
ptt0Timer.start(200); //Sequencer delay
monitor (true);
statusUpdate ();
}
void MainWindow::stopTx2()
{
Q_EMIT m_config.transceiver_ptt (false); //Lower PTT
if(m_mode=="JT9" and m_bFast9 and ui->cbEME->isChecked() and m_ntx==5 and (m_nTx73>=5)) {
on_stopTxButton_clicked();
m_nTx73=0;
}
if (!m_mode.startsWith ("WSPR") and m_mode!="Echo" and m_config.watchdog() and
m_repeatMsg>=m_watchdogLimit-1) {
on_stopTxButton_clicked();
msgBox("Runaway Tx watchdog");
m_repeatMsg=0;
}
if(m_mode.startsWith ("WSPR") and m_ntr==-1 and !m_tuneup) {
m_wideGraph->setWSPRtransmitted();
WSPR_scheduling ();
m_ntr=0;
}
if(m_config.offsetRxFreq() and ui->cbCQRx->isChecked()) {
// Q_EMIT m_config.transceiver_frequency(m_freqNominal);
RxQSYTimer.start(50);
}
}
void MainWindow::RxQSY()
{
// this appears to be a null directive
if (m_config.is_transceiver_online ()) {
Q_EMIT m_config.transceiver_frequency(m_freqNominal);
}
}
void MainWindow::ba2msg(QByteArray ba, char message[]) //ba2msg()
{
int iz=ba.length();
for(int i=0;i<28; i++) {
if(i<iz) {
message[i]=ba[i];
} else {
message[i]=32;
}
}
message[28]=0;
}
void MainWindow::on_txFirstCheckBox_stateChanged(int nstate) //TxFirst
{
m_txFirst = (nstate==2);
}
void MainWindow::set_ntx(int n) //set_ntx()
{
m_ntx=n;
m_repeatMsg=0;
}
void MainWindow::on_txb1_clicked() //txb1
{
m_ntx=1;
ui->txrb1->setChecked(true);
if (m_transmitting) m_restart=true;
}
void MainWindow::on_txb2_clicked() //txb2
{
m_ntx=2;
ui->txrb2->setChecked(true);
if (m_transmitting) m_restart=true;
}
void MainWindow::on_txb3_clicked() //txb3
{
m_ntx=3;
ui->txrb3->setChecked(true);
if (m_transmitting) m_restart=true;
}
void MainWindow::on_txb4_clicked() //txb4
{
m_ntx=4;
ui->txrb4->setChecked(true);
if (m_transmitting) m_restart=true;
}
void MainWindow::on_txb5_clicked() //txb5
{
m_ntx=5;
ui->txrb5->setChecked(true);
if (m_transmitting) m_restart=true;
}
void MainWindow::on_txb6_clicked() //txb6
{
m_ntx=6;
ui->txrb6->setChecked(true);
if (m_transmitting) m_restart=true;
}
void MainWindow::doubleClickOnCall2(bool shift, bool ctrl)
{
m_decodedText2=true;
doubleClickOnCall(shift,ctrl);
m_decodedText2=false;
}
void MainWindow::doubleClickOnCall(bool shift, bool ctrl)
{
QTextCursor cursor;
QString t; //Full contents
if(m_mode=="ISCAT") msgBox("Double-click not presently implemented for ISCAT mode");
if(shift) t=""; //Silence compiler warning
if(m_decodedText2) {
cursor=ui->decodedTextBrowser->textCursor();
t= ui->decodedTextBrowser->toPlainText();
} else {
cursor=ui->decodedTextBrowser2->textCursor();
t= ui->decodedTextBrowser2->toPlainText();
}
cursor.select(QTextCursor::LineUnderCursor);
int position {cursor.position()};
if(shift && position==-9999) return; //Silence compiler warning
QString messages;
if(!m_decodedText2) messages= ui->decodedTextBrowser2->toPlainText();
if(m_decodedText2) messages= ui->decodedTextBrowser->toPlainText();
if(ui->cbCQRx->isChecked()) m_bDoubleClickAfterCQnnn=true;
processMessage(messages, position, ctrl);
}
void MainWindow::processMessage(QString const& messages, int position, bool ctrl)
{
QString t1 = messages.mid(0,position); //contents up to \n on selected line
int i1=t1.lastIndexOf("\n") + 1; //points to first char of line
DecodedText decodedtext;
QString t2 = messages.mid(i1,position-i1); //selected line
QString t2a;
int ntsec=3600*t2.mid(0,2).toInt() + 60*t2.mid(2,2).toInt();
if(m_bFast9) {
ntsec = ntsec + t2.mid(4,2).toInt();
t2a=t2.mid(0,4) + t2.mid(6,-1); //Change hhmmss to hhmm for the message parser
} else {
t2a=t2;
}
if(m_bFast9) {
i1=t2a.indexOf(" CQ ");
if(i1>10) {
bool ok;
int kHz=t2a.mid(i1+4,3).toInt(&ok);
if(ok and kHz>=0 and kHz<=999) {
t2a=t2a.mid(0,i1+4) + t2a.mid(i1+8,-1);
if (m_config.is_transceiver_online ()) {
Frequency frequency {m_freqNominal / 1000000 * 1000000 + 1000*kHz}; //QSY Freq for answering CQ nnn
QString t;
t.sprintf("QSY %7.3f", frequency / 10e6);
ui->decodedTextBrowser2->displayQSY(t);
// ui->labDialFreq->setText (Radio::pretty_frequency_MHz_string (frequency));
if (m_config.is_transceiver_online ()) {
Q_EMIT m_config.transceiver_frequency (frequency);
}
if ((m_monitoring || m_transmitting)
&& m_config.is_transceiver_online ()
&& m_config.split_mode ())
{
// All conditions are met, reset the transmit dial frequency:
Q_EMIT m_config.transceiver_tx_frequency(frequency);
}
}
}
}
}
decodedtext = t2a;
if (decodedtext.indexOf(" CQ ") > 0) {
// TODO this magic 37 characters is also referenced in DisplayText::_appendDXCCWorkedB4()
auto eom_pos = decodedtext.string ().indexOf (' ', 36);
if (eom_pos < 36) eom_pos = decodedtext.string ().size () - 1; // we always want at least the characters
// to position 36
decodedtext = decodedtext.string ().left (eom_pos + 1); // remove DXCC entity and worked B4 status. TODO need a better way to do this
}
auto t3 = decodedtext.string ();
auto t4 = t3.replace (" CQ DX ", " CQ_DX ").split (" ", QString::SkipEmptyParts);
if(t4.size () < 6) return; //Skip the rest if no decoded text
int frequency = decodedtext.frequencyOffset();
if (ui->RxFreqSpinBox->isEnabled ())
{
ui->RxFreqSpinBox->setValue (frequency); //Set Rx freq
}
if (decodedtext.isTX())
{
if (ctrl && ui->TxFreqSpinBox->isEnabled ())
{
ui->TxFreqSpinBox->setValue(frequency); //Set Tx freq
}
return;
}
int nmod=ntsec % (2*m_TRperiod);
m_txFirst=(nmod!=0);
ui->txFirstCheckBox->setChecked(m_txFirst);
QString hiscall;
QString hisgrid;
decodedtext.deCallAndGrid(/*out*/hiscall,hisgrid);
if (!Radio::is_callsign (hiscall) // not interested if not from QSO partner
&& !(t4.size () == 7 // unless it is of the form
&& (t4.at (5) == m_baseCall // "<our-call> 73"
|| t4.at (5).startsWith (m_baseCall + '/')
|| t4.at (5).endsWith ('/' + m_baseCall))
&& t4.at (6) == "73"))
{
qDebug () << "Not processing message - hiscall:" << hiscall << "hisgrid:" << hisgrid;
return;
}
// only allow automatic mode changes between JT9 and JT65, and when not transmitting
if (!m_transmitting and m_mode == "JT9+JT65") {
if (decodedtext.isJT9())
{
m_modeTx="JT9";
ui->pbTxMode->setText("Tx JT9 @");
m_wideGraph->setModeTx(m_modeTx);
} else if (decodedtext.isJT65()) {
m_modeTx="JT65";
ui->pbTxMode->setText("Tx JT65 #");
m_wideGraph->setModeTx(m_modeTx);
}
} else if ((decodedtext.isJT9 () and m_modeTx != "JT9" and m_mode != "JT4") or
(decodedtext.isJT65 () and m_modeTx != "JT65" and m_mode != "JT4")) {
// if we are not allowing mode change then don't process decode
return;
}
QString firstcall = decodedtext.call();
if(!m_bFastMode) {
// Don't change Tx freq if in a fast mode; also not if a station is calling me,
// unless m_lockTxFreq is true or CTRL is held down
if ((firstcall!=m_config.my_callsign () and firstcall != m_baseCall) or
m_lockTxFreq or ctrl) {
if (ui->TxFreqSpinBox->isEnabled ()) {
if(!m_bFastMode) ui->TxFreqSpinBox->setValue(frequency);
} else if(m_mode != "JT4" && m_mode != "JT65" && !m_mode.startsWith ("JT9") &&
m_mode != "QRA") {
return;
}
}
}
int i9=m_QSOText.indexOf(decodedtext.string());
if (i9<0 and !decodedtext.isTX())
{
decodedtext=t2;
ui->decodedTextBrowser2->displayDecodedText(decodedtext, m_baseCall, false, m_logBook,
m_config.color_CQ(), m_config.color_MyCall(), m_config.color_DXCC(),
m_config.color_NewCall());
m_QSOText=decodedtext;
}
// prior DX call (possible QSO partner)
auto qso_partner_base_call = Radio::base_callsign (ui->dxCallEntry-> text ().toUpper ().trimmed ());
auto base_call = Radio::base_callsign (hiscall);
if (base_call != Radio::base_callsign (ui->dxCallEntry-> text ().toUpper ().trimmed ()) || base_call != hiscall)
{
// his base call different or his call more qualified
// i.e. compound version of same base call
ui->dxCallEntry->setText(hiscall);
}
if (gridOK(hisgrid)) {
if(ui->dxGridEntry->text().mid(0,4) != hisgrid) ui->dxGridEntry->setText(hisgrid);
}
if (ui->dxGridEntry->text()=="")
lookup();
m_hisGrid = ui->dxGridEntry->text();
QString rpt = decodedtext.report();
int n=rpt.toInt();
if((m_mode=="JTMSK" or m_mode=="MSK144") and m_bShMsgs) {
n=26;
if(rpt.toInt()>4) n=27;
if(rpt.toInt()>8) n=28;
rpt=QString::number(n);
}
ui->rptSpinBox->setValue(n);
genStdMsgs(rpt);
// Determine appropriate response to received message
auto dtext = " " + decodedtext.string () + " ";
if(dtext.contains (" " + m_baseCall + " ")
|| dtext.contains ("<" + m_baseCall + " ")
|| dtext.contains ("/" + m_baseCall + " ")
|| dtext.contains (" " + m_baseCall + "/")
|| (firstcall == "DE" && ((t4.size () > 7 && t4.at(7) != "73") || t4.size () <= 7)))
{
if (t4.size () > 7 // enough fields for a normal msg
and !gridOK (t4.at (7))) // but no grid on end of msg
{
QString r=t4.at (7);
if(r.mid(0,3)=="RRR" || (r.toInt()==73)) {
m_ntx=5;
ui->txrb5->setChecked(true);
if(ui->tabWidget->currentIndex()==1) {
ui->genMsg->setText(ui->tx5->currentText());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
}
} else if(r.mid(0,1)=="R") {
m_ntx=4;
ui->txrb4->setChecked(true);
if(ui->tabWidget->currentIndex()==1) {
ui->genMsg->setText(ui->tx4->text());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
}
} else if(r.toInt()>=-50 and r.toInt()<=49) {
m_ntx=3;
ui->txrb3->setChecked(true);
if(ui->tabWidget->currentIndex()==1) {
ui->genMsg->setText(ui->tx3->text());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
}
}
}
else if (t4.size () == 7 && t4.at (6) == "73") {
// 73 back to compound call holder
m_ntx=5;
ui->txrb5->setChecked(true);
if(ui->tabWidget->currentIndex()==1) {
ui->genMsg->setText(ui->tx5->currentText());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
}
}
else {
m_ntx=2;
ui->txrb2->setChecked(true);
if(ui->tabWidget->currentIndex()==1) {
ui->genMsg->setText(ui->tx2->text());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
}
if(m_bDoubleClickAfterCQnnn and m_transmitting) {
on_stopTxButton_clicked();
TxAgainTimer.start(1500);
}
m_bDoubleClickAfterCQnnn=false;
}
}
else if (firstcall == "DE" && t4.size () == 8 && t4.at (7) == "73") {
if (base_call == qso_partner_base_call) {
// 73 back to compound call holder
m_ntx=5;
ui->txrb5->setChecked(true);
if(ui->tabWidget->currentIndex()==1) {
ui->genMsg->setText(ui->tx5->currentText());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
}
}
else {
// treat like a CQ/QRZ
m_ntx=1;
ui->txrb1->setChecked(true);
if(ui->tabWidget->currentIndex()==1) {
ui->genMsg->setText(ui->tx1->text());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
}
}
}
else // myCall not in msg
{
m_ntx=1;
ui->txrb1->setChecked(true);
if(ui->tabWidget->currentIndex()==1) {
ui->genMsg->setText(ui->tx1->text());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
}
}
if(m_transmitting) m_restart=true;
if(m_config.quick_call()) auto_tx_mode(true);
}
void MainWindow::genStdMsgs(QString rpt) //genStdMsgs()
{
QString t;
if(m_config.my_callsign() !="" and m_config.my_grid() !="")
{
t="CQ " + m_config.my_callsign() + " " + m_config.my_grid().mid(0,4);
if(m_config.offsetRxFreq() and ui->cbCQRx->isChecked()) {
t.sprintf("CQ %3.3d ",m_freqCQ);
t += m_config.my_callsign() + " " + m_config.my_grid().mid(0,4);
}
if(m_mode=="JT4") t="@1000 (TUNE)";
msgtype(t, ui->tx6);
}
else
{
ui->tx6->setText("");
}
QString hisCall=ui->dxCallEntry->text().toUpper().trimmed();
ui->dxCallEntry->setText(hisCall);
if(hisCall=="") {
ui->labAz->setText("");
ui->labDist->setText("");
ui->tx1->setText("");
ui->tx2->setText("");
ui->tx3->setText("");
ui->tx4->setText("");
ui->tx5->setCurrentText("");
ui->genMsg->setText("");
return;
}
QString hisBase = Radio::base_callsign (hisCall);
QString t0=hisBase + " " + m_baseCall + " ";
t=t0 + m_config.my_grid ().mid(0,4);
msgtype(t, ui->tx1);
if(rpt == "") {
t=t+" OOO";
msgtype(t, ui->tx2);
msgtype("RO", ui->tx3);
msgtype("RRR", ui->tx4);
msgtype("73", ui->tx5->lineEdit ());
} else {
int n=rpt.toInt();
rpt.sprintf("%+2.2d",n);
if((m_mode=="JTMSK" or m_mode=="MSK144") and m_bShMsgs) {
int i=t0.length()-1;
t0="<" + t0.mid(0,i) + "> ";
if(n<26) n=26;
if(n>28) n=28;
rpt.sprintf("%2.2d",n);
}
t=t0 + rpt;
msgtype(t, ui->tx2);
t=t0 + "R" + rpt;
msgtype(t, ui->tx3);
t=t0 + "RRR";
if(m_mode=="JT4" and m_bShMsgs) t="@1500 (RRR)";
msgtype(t, ui->tx4);
t=t0 + "73";
if(m_mode=="JT4" and m_bShMsgs) t="@1750 (73)";
msgtype(t, ui->tx5->lineEdit ());
}
if(m_config.my_callsign () != m_baseCall) {
if(shortList(m_config.my_callsign ())) {
t=hisBase + " " + m_config.my_callsign ();
msgtype(t, ui->tx1);
t="CQ " + m_config.my_callsign ();
if(m_config.offsetRxFreq() and ui->cbCQRx->isChecked()) {
t.sprintf("CQ %3.3d ",m_freqCQ);
t += m_config.my_callsign ();
}
msgtype(t, ui->tx6);
} else {
switch (m_config.type_2_msg_gen ())
{
case Configuration::type_2_msg_1_full:
t="DE " + m_config.my_callsign () + " " + m_config.my_grid ().mid(0,4);
msgtype(t, ui->tx1);
t=t0 + "R" + rpt;
msgtype(t, ui->tx3);
break;
case Configuration::type_2_msg_3_full:
t = t0 + m_config.my_grid ().mid(0,4);
msgtype(t, ui->tx1);
t="DE " + m_config.my_callsign () + " R" + rpt;
msgtype(t, ui->tx3);
break;
case Configuration::type_2_msg_5_only:
t = t0 + m_config.my_grid ().mid(0,4);
msgtype(t, ui->tx1);
t=t0 + "R" + rpt;
msgtype(t, ui->tx3);
break;
}
t="DE " + m_config.my_callsign () + " 73";
msgtype(t, ui->tx5->lineEdit ());
}
if (hisCall != hisBase
&& m_config.type_2_msg_gen () != Configuration::type_2_msg_5_only) {
// cfm we have his full call copied as we could not do this earlier
t = hisCall + " 73";
msgtype(t, ui->tx5->lineEdit ());
}
} else {
if(hisCall!=hisBase) {
if(shortList(hisCall)) {
// cfm we know his full call with a type 1 tx1 message
t=hisCall + " " + m_config.my_callsign ();
msgtype(t, ui->tx1);
}
else {
t=hisCall + " 73";
msgtype(t, ui->tx5->lineEdit());
}
}
}
m_ntx=1;
ui->txrb1->setChecked(true);
m_rpt=rpt;
}
void MainWindow::TxAgain()
{
auto_tx_mode(true);
}
void MainWindow::clearDX ()
{
ui->dxCallEntry->setText("");
ui->dxGridEntry->setText("");
m_hisCall="";
m_hisGrid="";
m_rptSent="";
m_rptRcvd="";
m_qsoStart="";
m_qsoStop="";
genStdMsgs("");
if (1 == ui->tabWidget->currentIndex())
{
ui->genMsg->setText(ui->tx6->text());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
}
else
{
m_ntx=6;
ui->txrb6->setChecked(true);
}
}
void MainWindow::lookup() //lookup()
{
QString hisCall=ui->dxCallEntry->text().toUpper().trimmed();
if (hisCall.isEmpty ())
{
return;
}
ui->dxCallEntry->setText(hisCall);
QFile f {m_dataDir.absoluteFilePath ("CALL3.TXT")};
if (f.open (QIODevice::ReadOnly | QIODevice::Text))
{
char c[132];
qint64 n=0;
for(int i=0; i<999999; i++) {
n=f.readLine(c,sizeof(c));
if(n <= 0) {
ui->dxGridEntry->setText("");
break;
}
QString t=QString(c);
if(t.indexOf(hisCall)==0) {
int i1=t.indexOf(",");
QString hisgrid=t.mid(i1+1,6);
i1=hisgrid.indexOf(",");
if(i1>0) {
hisgrid=hisgrid.mid(0,4);
} else {
hisgrid=hisgrid.mid(0,4) + hisgrid.mid(4,2).toLower();
}
ui->dxGridEntry->setText(hisgrid);
break;
}
}
f.close();
}
}
void MainWindow::on_lookupButton_clicked() //Lookup button
{
lookup();
}
void MainWindow::on_addButton_clicked() //Add button
{
if(ui->dxGridEntry->text()=="") {
msgBox("Please enter a valid grid locator.");
return;
}
m_call3Modified=false;
QString hisCall=ui->dxCallEntry->text().toUpper().trimmed();
QString hisgrid=ui->dxGridEntry->text().trimmed();
QString newEntry=hisCall + "," + hisgrid;
// int ret = QMessageBox::warning(this, "Add",
// newEntry + "\n" + "Is this station known to be active on EME?",
// QMessageBox::Yes | QMessageBox::No, QMessageBox::Yes);
// if(ret==QMessageBox::Yes) {
// newEntry += ",EME,,";
// } else {
newEntry += ",,,";
// }
QFile f1 {m_dataDir.absoluteFilePath ("CALL3.TXT")};
if(!f1.open(QIODevice::ReadWrite | QIODevice::Text)) {
msgBox("Cannot open \"" + f1.fileName () + "\" for read/write:" + f1.errorString ());
return;
}
if(f1.size()==0) {
QTextStream out(&f1);
out << "ZZZZZZ" << endl;
f1.close();
f1.open(QIODevice::ReadOnly | QIODevice::Text);
}
QFile f2 {m_dataDir.absoluteFilePath ("CALL3.TMP")};
if(!f2.open(QIODevice::WriteOnly | QIODevice::Text)) {
msgBox("Cannot open \"" + f2.fileName () + "\" for writing:" + f2.errorString ());
return;
}
QTextStream in(&f1); //Read from CALL3.TXT
QTextStream out(&f2); //Copy into CALL3.TMP
QString hc=hisCall;
QString hc1="";
QString hc2="000000";
QString s;
do {
s=in.readLine();
hc1=hc2;
if(s.mid(0,2)=="//") {
out << s + "\n"; //Copy all comment lines
} else {
int i1=s.indexOf(",");
hc2=s.mid(0,i1);
if(hc>hc1 && hc<hc2) {
out << newEntry + "\n";
out << s + "\n";
m_call3Modified=true;
} else if(hc==hc2) {
QString t=s + "\n\n is already in CALL3.TXT\n" +
"Do you wish to replace it?";
int ret = QMessageBox::warning(this, "Add",t,
QMessageBox::Yes | QMessageBox::No, QMessageBox::Yes);
if(ret==QMessageBox::Yes) {
out << newEntry + "\n";
m_call3Modified=true;
}
} else {
if(s!="") out << s + "\n";
}
}
} while(!s.isNull());
f1.close();
if(hc>hc1 && !m_call3Modified) out << newEntry + "\n";
if(m_call3Modified) {
QFile f0 {m_dataDir.absoluteFilePath ("CALL3.OLD")};
if(f0.exists()) f0.remove();
QFile f1 {m_dataDir.absoluteFilePath ("CALL3.TXT")};
f1.rename(m_dataDir.absoluteFilePath ("CALL3.OLD"));
f2.rename(m_dataDir.absoluteFilePath ("CALL3.TXT"));
f2.close();
}
}
void MainWindow::msgtype(QString t, QLineEdit* tx) //msgtype()
{
char message[29];
char msgsent[29];
int len1=22;
QByteArray s=t.toUpper().toLocal8Bit();
ba2msg(s,message);
int ichk=1,itype=0;
// gen9_(message,&ichk,msgsent,const_cast<int *>(itone),&itype,len1,len1);
gen65_(message,&ichk,msgsent,const_cast<int *>(itone),&itype,len1,len1);
msgsent[22]=0;
bool text=false;
bool short65=false;
if(itype==6) text=true;
if(itype==7) short65=true;
if((m_mode=="JTMSK" or m_mode=="MSK144") and t.mid(0,1)=="<") text=false;
QString t1;
t1.fromLatin1(msgsent);
if(text) t1=t1.mid(0,13);
QPalette p(tx->palette());
if(text) {
p.setColor(QPalette::Base,"#ffccff");
} else {
if(short65) {
p.setColor(QPalette::Base,"#66ffff");
} else {
p.setColor(QPalette::Base,Qt::white);
if((m_mode=="JTMSK" or m_mode=="MSK144") and t.mid(0,1)=="<") {
p.setColor(QPalette::Base,"#00ffff");
}
}
}
tx->setPalette(p);
int len=t.length();
auto pos = tx->cursorPosition ();
if(text && m_mode!="JTMSK" && m_mode!="MSK144" && t.mid(0,1)!="<") {
len=qMin(len,13);
tx->setText(t.mid(0,len).toUpper());
} else {
tx->setText(t);
}
tx->setCursorPosition (pos);
}
void MainWindow::on_tx1_editingFinished() //tx1 edited
{
QString t=ui->tx1->text();
msgtype(t, ui->tx1);
}
void MainWindow::on_tx2_editingFinished() //tx2 edited
{
QString t=ui->tx2->text();
msgtype(t, ui->tx2);
}
void MainWindow::on_tx3_editingFinished() //tx3 edited
{
QString t=ui->tx3->text();
msgtype(t, ui->tx3);
}
void MainWindow::on_tx4_editingFinished() //tx4 edited
{
QString t=ui->tx4->text();
msgtype(t, ui->tx4);
}
void MainWindow::on_tx5_currentTextChanged (QString const& text) //tx5 edited
{
msgtype(text, ui->tx5->lineEdit ());
}
void MainWindow::on_tx6_editingFinished() //tx6 edited
{
QString t=ui->tx6->text();
msgtype(t, ui->tx6);
}
void MainWindow::on_dxCallEntry_textChanged(const QString &t) //dxCall changed
{
m_hisCall=t.toUpper().trimmed();
ui->dxCallEntry->setText(m_hisCall);
statusChanged();
statusUpdate ();
}
void MainWindow::on_dxGridEntry_textChanged(const QString &t) //dxGrid changed
{
int n=t.length();
if(n!=4 and n!=6) {
ui->labAz->setText("");
ui->labDist->setText("");
return;
}
if(!t[0].isLetter() or !t[1].isLetter()) return;
if(!t[2].isDigit() or !t[3].isDigit()) return;
if(n==4) m_hisGrid=t.mid(0,2).toUpper() + t.mid(2,2);
if(n==6) m_hisGrid=t.mid(0,2).toUpper() + t.mid(2,2) +
t.mid(4,2).toLower();
ui->dxGridEntry->setText(m_hisGrid);
if(gridOK(m_hisGrid)) {
qint64 nsec = QDateTime::currentMSecsSinceEpoch() % 86400;
double utch=nsec/3600.0;
int nAz,nEl,nDmiles,nDkm,nHotAz,nHotABetter;
azdist_(const_cast <char *> ((m_config.my_grid () + " ").left (6).toLatin1().constData()),
const_cast <char *> ((m_hisGrid + " ").left (6).toLatin1().constData()),&utch,
&nAz,&nEl,&nDmiles,&nDkm,&nHotAz,&nHotABetter,6,6);
QString t;
t.sprintf("Az: %d",nAz);
ui->labAz->setText(t);
if (m_config.miles ())
{
t.sprintf ("%d mi", int (0.621371 * nDkm));
}
else
{
t.sprintf ("%d km", nDkm);
}
ui->labDist->setText(t);
} else {
ui->labAz->setText("");
ui->labDist->setText("");
}
statusUpdate ();
}
void MainWindow::on_genStdMsgsPushButton_clicked() //genStdMsgs button
{
genStdMsgs(m_rpt);
}
void MainWindow::on_logQSOButton_clicked() //Log QSO button
{
if(m_hisCall=="") return;
m_dateTimeQSO=QDateTime::currentDateTimeUtc();
m_logDlg->initLogQSO (m_hisCall, m_hisGrid, m_modeTx, m_rptSent, m_rptRcvd,
m_dateTimeQSO, m_freqNominal + ui->TxFreqSpinBox->value(),
m_config.my_callsign(), m_config.my_grid(), m_noSuffix,
m_config.log_as_RTTY(), m_config.report_in_comments());
}
void MainWindow::acceptQSO2(QDateTime const& QSO_date, QString const& call, QString const& grid
, Frequency dial_freq, QString const& mode
, QString const& rpt_sent, QString const& rpt_received
, QString const& tx_power, QString const& comments
, QString const& name)
{
QString date = m_dateTimeQSO.toString("yyyyMMdd");
m_logBook.addAsWorked (m_hisCall, m_config.bands ()->find (m_freqNominal), m_modeTx, date);
m_messageClient->qso_logged (QSO_date, call, grid, dial_freq, mode, rpt_sent, rpt_received, tx_power, comments, name);
if (m_config.clear_DX ())
{
clearDX ();
}
}
void MainWindow::on_actionJT9_triggered()
{
m_mode="JT9";
if(m_nSubMode<4) {
ui->cbFast9->setChecked(false);
ui->cbFast9->setEnabled(false);
} else {
ui->cbFast9->setEnabled(true);
}
m_bFast9=ui->cbFast9->isChecked();
m_bFastMode=m_bFast9;
WSPR_config(false);
switch_mode (Modes::JT9);
if(m_modeTx!="JT9") on_pbTxMode_clicked();
statusChanged();
m_nsps=6912;
m_FFTSize = m_nsps / 2;
Q_EMIT FFTSize (m_FFTSize);
QString t1=(QString)QChar(short(m_nSubMode+65));
m_hsymStop=173;
if(m_config.decode_at_52s()) m_hsymStop=179;
mode_label->setStyleSheet("QLabel{background-color: #ff99cc}");
bool bVHF=m_config.enable_VHF_features();
if(bVHF) {
QString t1=(QString)QChar(short(m_nSubMode+65));
mode_label->setText(m_mode + " " + t1);
} else {
mode_label->setText(m_mode);
}
m_toneSpacing=0.0;
ui->actionJT9->setChecked(true);
m_wideGraph->setMode(m_mode);
m_wideGraph->setModeTx(m_modeTx);
ui->pbTxMode->setVisible(false);
VHF_features_enabled(bVHF);
VHF_controls_visible(bVHF);
ui->cbFast9->setVisible(bVHF);
ui->cbShMsgs->setVisible(false);
ui->cbTx6->setVisible(false);
ui->cbEME->setVisible(true);
ui->sbSubmode->setVisible(true);
ui->sbSubmode->setMaximum(7);
fast_config(m_bFastMode);
if(m_bFast9) {
m_TRperiod=ui->sbTR->cleanText().toInt();
m_wideGraph->hide();
m_fastGraph->show();
ui->TxFreqSpinBox->setValue(700);
ui->RxFreqSpinBox->setValue(700);
ui->decodedTextLabel->setText("UTC dB T Freq Message");
ui->decodedTextLabel2->setText("UTC dB T Freq Message");
ui->sbTR->setVisible(true);
} else {
m_TRperiod=60;
ui->decodedTextLabel->setText("UTC dB DT Freq Message");
ui->decodedTextLabel2->setText("UTC dB DT Freq Message");
ui->sbTR->setVisible(false);
}
m_wideGraph->setPeriod(m_TRperiod,m_nsps);
m_modulator->setPeriod(m_TRperiod); // TODO - not thread safe
m_detector->setPeriod(m_TRperiod); // TODO - not thread safe
ui->label_6->setText("Band Activity");
ui->label_7->setText("Rx Frequency");
ui->ClrAvgButton->setVisible(false);
}
void MainWindow::on_actionJTMSK_triggered()
{
// on_actionISCAT_triggered();
m_mode="JTMSK";
m_modeTx="JTMSK";
ui->actionJTMSK->setChecked(true);
WSPR_config(false);
switch_mode (Modes::JTMSK);
statusChanged();
m_nsps=6;
m_FFTSize = 7 * 512;
Q_EMIT FFTSize (m_FFTSize);
mode_label->setStyleSheet("QLabel{background-color: #ff6666}");
mode_label->setText(m_mode);
m_toneSpacing=0.0;
ui->actionJTMSK->setChecked(true);
ui->pbTxMode->setVisible(false);
VHF_features_enabled(true);
VHF_controls_visible(true);
ui->cbFast9->setVisible(false);
ui->cbShMsgs->setVisible(true);
ui->cbTx6->setVisible(false);
ui->sbSubmode->setVisible(false);
m_bFastMode=true;
m_bFast9=true;
fast_config(m_bFastMode);
m_TRperiod=ui->sbTR->cleanText().toInt();
m_wideGraph->hide();
m_fastGraph->show();
ui->TxFreqSpinBox->setValue(1500);
ui->RxFreqSpinBox->setValue(1500);
ui->decodedTextLabel->setText("UTC dB T Freq Message");
ui->decodedTextLabel2->setText("UTC dB T Freq Message");
m_modulator->setPeriod(m_TRperiod); // TODO - not thread safe
m_detector->setPeriod(m_TRperiod); // TODO - not thread safe
m_wideGraph->setPeriod(m_TRperiod,m_nsps);
ui->label_6->setText("Band Activity");
ui->label_7->setText("Rx Frequency");
ui->sbTR->setVisible(true);
ui->sbFtol->setVisible(true);
ui->cbEME->setVisible(true);
ui->ClrAvgButton->setVisible(false);
}
void MainWindow::on_actionMSK144_triggered()
{
on_actionJTMSK_triggered();
m_mode="MSK144";
m_modeTx="MSK144";
ui->actionMSK144->setChecked(true);
switch_mode (Modes::MSK144);
statusChanged();
m_nsps=6;
m_FFTSize = 7 * 512;
Q_EMIT FFTSize (m_FFTSize);
mode_label->setStyleSheet("QLabel{background-color: #ff6666}");
mode_label->setText(m_mode);
m_toneSpacing=0.0;
ui->cbShMsgs->setChecked(false);
ui->cbShMsgs->setVisible(false);
ui->actionMSK144->setChecked(true);
}
void MainWindow::on_actionQRA_triggered()
{
on_actionJT65_triggered();
m_mode="QRA";
m_modeTx="QRA";
ui->actionQRA->setChecked(true);
switch_mode (Modes::QRA);
statusChanged();
mode_label->setStyleSheet("QLabel{background-color: #99ff33}");
QString t1=(QString)QChar(short(m_nSubMode+65));
mode_label->setText(m_mode + " " + t1);
}
void MainWindow::on_actionJT65_triggered()
{
if(m_mode=="JT4" or m_mode.startsWith ("WSPR")) {
// If coming from JT4 or WSPR mode, pretend temporarily that we're coming
// from JT9 and click the pbTxMode button
m_modeTx="JT9";
on_pbTxMode_clicked();
}
on_actionJT9_triggered();
m_mode="JT65";
WSPR_config(false);
switch_mode (Modes::JT65);
if(m_modeTx!="JT65") on_pbTxMode_clicked();
statusChanged();
m_TRperiod=60;
m_modulator->setPeriod(m_TRperiod); // TODO - not thread safe
m_detector->setPeriod(m_TRperiod); // TODO - not thread safe
m_nsps=6912; //For symspec only
m_FFTSize = m_nsps / 2;
Q_EMIT FFTSize (m_FFTSize);
m_hsymStop=173;
if(m_config.decode_at_52s()) m_hsymStop=179;
m_toneSpacing=0.0;
mode_label->setStyleSheet("QLabel{background-color: #66ff66}");
QString t1=(QString)QChar(short(m_nSubMode+65));
mode_label->setText(m_mode + " " + t1);
ui->ClrAvgButton->setVisible(false);
ui->actionJT65->setChecked(true);
VHF_features_enabled(true);
m_wideGraph->setPeriod(m_TRperiod,m_nsps);
m_wideGraph->setMode(m_mode);
m_wideGraph->setModeTx(m_modeTx);
ui->pbTxMode->setVisible(false);
bool bVHF=m_config.enable_VHF_features();
m_bFastMode=false;
m_bFast9=false;
VHF_controls_visible(bVHF);
ui->cbFast9->setVisible(false);
fast_config(false);
ui->sbSubmode->setMaximum(2);
if(bVHF) {
ui->sbSubmode->setValue(m_nSubMode);
} else {
ui->sbSubmode->setValue(0);
ui->sbTR->setValue(0);
}
if(m_config.single_decode()) {
ui->label_6->setText("Single-Period Decodes");
ui->label_7->setText("Average Decodes");
} else {
ui->label_6->setText("Band Activity");
ui->label_7->setText("Rx Frequency");
}
}
void MainWindow::on_actionJT9_JT65_triggered()
{
m_mode="JT9+JT65";
WSPR_config(false);
switch_mode (Modes::JT65);
if(m_modeTx != "JT65") {
ui->pbTxMode->setText("Tx JT9 @");
m_modeTx="JT9";
}
m_nSubMode=0; //Dual-mode always means JT9 and JT65A
statusChanged();
m_TRperiod=60;
m_modulator->setPeriod(m_TRperiod); // TODO - not thread safe
m_detector->setPeriod(m_TRperiod); // TODO - not thread safe
m_nsps=6912;
m_FFTSize = m_nsps / 2;
Q_EMIT FFTSize (m_FFTSize);
m_hsymStop=173;
if(m_config.decode_at_52s()) m_hsymStop=179;
m_toneSpacing=0.0;
mode_label->setStyleSheet("QLabel{background-color: #ffff66}");
mode_label->setText(m_mode);
ui->actionJT9_JT65->setChecked(true);
VHF_features_enabled(false);
m_wideGraph->setPeriod(m_TRperiod,m_nsps);
m_wideGraph->setMode(m_mode);
m_wideGraph->setModeTx(m_modeTx);
ui->pbTxMode->setVisible(true);
m_bFastMode=false;
m_bFast9=false;
VHF_controls_visible(false);
fast_config(false);
ui->sbSubmode->setValue(0);
ui->sbTR->setValue(0);
ui->label_6->setText("Band Activity");
ui->label_7->setText("Rx Frequency");
ui->ClrAvgButton->setVisible(false);
}
void MainWindow::on_actionJT4_triggered()
{
m_mode="JT4";
WSPR_config(false);
switch_mode (Modes::JT4);
m_modeTx="JT4";
mode_label->setStyleSheet("QLabel{background-color: #cc99ff}");
statusChanged();
m_TRperiod=60;
m_modulator->setPeriod(m_TRperiod); // TODO - not thread safe
m_detector->setPeriod(m_TRperiod); // TODO - not thread safe
m_nsps=6912; //For symspec only
m_FFTSize = m_nsps / 2;
Q_EMIT FFTSize (m_FFTSize);
m_hsymStop=179;
m_toneSpacing=0.0;
ui->actionJT4->setChecked(true);
VHF_features_enabled(true);
ui->ClrAvgButton->setVisible(true);
m_wideGraph->setPeriod(m_TRperiod,m_nsps);
m_wideGraph->setMode(m_mode);
m_wideGraph->setModeTx(m_modeTx);
ui->pbTxMode->setVisible(false);
m_bFastMode=false;
m_bFast9=false;
bool bVHF=m_config.enable_VHF_features();
VHF_controls_visible(bVHF);
fast_config(false);
ui->cbFast9->setVisible(false);
ui->cbShMsgs->setVisible(true);
ui->cbTx6->setVisible(true);
ui->sbTR->setVisible(false);
ui->sbSubmode->setVisible(true);
ui->sbSubmode->setMaximum(6);
ui->label_6->setText("Single-Period Decodes");
ui->label_7->setText("Average Decodes");
if(bVHF) {
ui->sbSubmode->setValue(m_nSubMode);
} else {
ui->sbSubmode->setValue(0);
ui->sbTR->setValue(0);
}
QString t1=(QString)QChar(short(m_nSubMode+65));
mode_label->setText(m_mode + " " + t1);
}
void MainWindow::on_actionWSPR_2_triggered()
{
m_mode="WSPR-2";
WSPR_config(true);
switch_mode (Modes::WSPR);
m_modeTx="WSPR-2"; //### not needed ?? ###
statusChanged();
m_TRperiod=120;
m_modulator->setPeriod(m_TRperiod); // TODO - not thread safe
m_detector->setPeriod(m_TRperiod); // TODO - not thread safe
m_nsps=6912; //For symspec only
m_FFTSize = m_nsps / 2;
Q_EMIT FFTSize (m_FFTSize);
m_hsymStop=396;
m_toneSpacing=12000.0/8192.0;
mode_label->setStyleSheet("QLabel{background-color: #ff66ff}");
mode_label->setText(m_mode);
ui->actionWSPR_2->setChecked(true);
VHF_features_enabled(false);
ui->ClrAvgButton->setVisible(false);
m_wideGraph->setPeriod(m_TRperiod,m_nsps);
m_wideGraph->setMode(m_mode);
m_wideGraph->setModeTx(m_modeTx);
m_bFastMode=false;
m_bFast9=false;
fast_config(false);
ui->TxFreqSpinBox->setValue(ui->WSPRfreqSpinBox->value());
}
void MainWindow::on_actionWSPR_15_triggered()
{
msgBox("WSPR-15 is not yet available");
switch_mode (Modes::WSPR);
}
void MainWindow::on_actionEcho_triggered()
{
on_actionJT4_triggered();
m_mode="Echo";
ui->actionEcho->setChecked(true);
mode_label->setStyleSheet("QLabel{background-color: #66ffff}");
mode_label->setText(m_mode);
m_TRperiod=3;
m_modulator->setPeriod(m_TRperiod); // TODO - not thread safe
m_detector->setPeriod(m_TRperiod); // TODO - not thread safe
m_nsps=6912; //For symspec only
m_FFTSize = m_nsps / 2;
Q_EMIT FFTSize (m_FFTSize);
m_hsymStop=10;
m_toneSpacing=1.0;
switch_mode(Modes::Echo);
m_modeTx="Echo";
m_wideGraph->setMode(m_mode);
m_wideGraph->setModeTx(m_modeTx);
ui->TxFreqSpinBox->setValue(1500);
ui->TxFreqSpinBox->setEnabled (false);
statusChanged();
if(!m_echoGraph->isVisible()) m_echoGraph->show();
if (!ui->actionAstronomical_data->isChecked ()) {
ui->actionAstronomical_data->setChecked (true);
}
m_bFastMode=false;
m_bFast9=false;
VHF_controls_visible(false);
fast_config(false);
ui->decodedTextLabel->setText(" UTC N Level Sig DF Width Q");
auto_tx_label->setText("");
}
void MainWindow::on_actionISCAT_triggered()
{
m_mode="ISCAT";
m_modeTx="ISCAT";
ui->actionISCAT->setChecked(true);
m_TRperiod=ui->sbTR->cleanText().toInt();
m_modulator->setPeriod(m_TRperiod);
m_detector->setPeriod(m_TRperiod);
m_wideGraph->setPeriod(m_TRperiod,m_nsps);
m_nsps=6912; //For symspec only
m_FFTSize = m_nsps / 2;
Q_EMIT FFTSize (m_FFTSize);
m_hsymStop=103;
m_toneSpacing=11025.0/256.0;
WSPR_config(false);
switch_mode(Modes::ISCAT);
m_wideGraph->setMode(m_mode);
m_wideGraph->setModeTx(m_modeTx);
statusChanged();
if(!m_fastGraph->isVisible()) m_fastGraph->show();
if(m_wideGraph->isVisible()) m_wideGraph->hide();
mode_label->setStyleSheet("QLabel{background-color: #ff9933}");
mode_label->setText(m_mode);
VHF_controls_visible(true);
fast_config(true);
ui->pbTxMode->setVisible(false);
ui->cbFast9->setVisible(false);
ui->sbTR->setVisible(true);
ui->sbFtol->setVisible(true);
ui->sbSubmode->setVisible(true);
ui->cbShMsgs->setVisible(false);
ui->cbTx6->setVisible(false);
ui->cbEME->setVisible(false);
ui->decodedTextBrowser2->setVisible(false);
ui->decodedTextLabel2->setVisible(false);
ui->decodedTextLabel->setText(
" UTC Sync dB DT DF F1 N L A T");
auto_tx_label->setText("");
ui->tabWidget->setCurrentIndex(0);
ui->sbSubmode->setMaximum(1);
QString t1=(QString)QChar(short(m_nSubMode+65));
mode_label->setText(m_mode + " " + t1);
if(m_nSubMode==0) ui->TxFreqSpinBox->setValue(1012);
if(m_nSubMode==1) ui->TxFreqSpinBox->setValue(560);
ui->TxFreqSpinBox->setEnabled (false);
}
void MainWindow::switch_mode (Mode mode)
{
m_config.frequencies ()->filter (mode);
auto const& row = m_config.frequencies ()->best_working_frequency (m_freqNominal);
if (row >= 0) {
ui->bandComboBox->setCurrentIndex (row);
on_bandComboBox_activated (row);
}
bool b=(m_mode=="JTMSK" or m_mode=="MSK144");
ui->sbCQRxFreq->setVisible(b);
ui->cbCQRx->setVisible(b);
ui->syncSpinBox->setVisible(!b);
ui->pbR2T->setVisible(!b);
ui->pbT2R->setVisible(!b);
ui->cbTxLock->setVisible(!b);
ui->TxFreqSpinBox->setVisible(!b);
}
void MainWindow::WSPR_config(bool b)
{
ui->decodedTextBrowser2->setVisible(!b);
ui->decodedTextLabel2->setVisible(!b);
ui->controls_stack_widget->setCurrentIndex (b && m_mode != "Echo" ? 1 : 0);
ui->QSO_controls_widget->setVisible (!b);
ui->DX_controls_widget->setVisible (!b);
ui->WSPR_controls_widget->setVisible (b);
ui->label_6->setVisible(!b);
ui->label_7->setVisible(!b);
ui->logQSOButton->setVisible(!b);
ui->DecodeButton->setEnabled(!b);
if(b and (m_mode!="Echo")) {
ui->decodedTextLabel->setText(
"UTC dB DT Freq Drift Call Grid dBm Dist");
auto_tx_label->setText("");
if (m_config.is_transceiver_online ()) {
Q_EMIT m_config.transceiver_tx_frequency (0); // turn off split
}
m_bSimplex = true;
} else {
ui->decodedTextLabel->setText("UTC dB DT Freq Message");
auto_tx_label->setText (m_config.quick_call () ? "Auto-Tx-Enable Armed" : "Auto-Tx-Enable Disarmed");
m_bSimplex = false;
}
enable_DXCC_entity (m_config.DXCC ()); // sets text window proportions and (re)inits the logbook
}
void MainWindow::fast_config(bool b)
{
m_bFastMode=b;
ui->ClrAvgButton->setVisible(!b);
ui->TxFreqSpinBox->setEnabled(!b);
if(b) {
ui->cbEME->setText("Auto Seq");
ui->sbTR->setVisible(true);
} else {
ui->cbEME->setText("EME delay");
ui->sbTR->setVisible(false);
}
if(b and (m_bFast9 or m_mode=="JTMSK" or m_mode=="MSK144" or m_mode=="ISCAT")) {
ui->sbTR->setValue(m_TRindex);
m_wideGraph->hide();
m_fastGraph->show();
} else {
m_wideGraph->show();
m_fastGraph->hide();
}
}
void MainWindow::on_TxFreqSpinBox_valueChanged(int n)
{
m_wideGraph->setTxFreq(n);
if(m_lockTxFreq) ui->RxFreqSpinBox->setValue(n);
Q_EMIT transmitFrequency (n - m_XIT);
statusUpdate ();
}
void MainWindow::on_RxFreqSpinBox_valueChanged(int n)
{
m_wideGraph->setRxFreq(n);
if (m_lockTxFreq && ui->TxFreqSpinBox->isEnabled ())
{
ui->TxFreqSpinBox->setValue (n);
}
else
{
statusUpdate ();
}
}
void MainWindow::on_actionQuickDecode_triggered()
{
m_ndepth=(m_ndepth&48) + 1;
ui->actionQuickDecode->setChecked(true);
}
void MainWindow::on_actionMediumDecode_triggered()
{
m_ndepth=(m_ndepth&48) + 2;
ui->actionMediumDecode->setChecked(true);
}
void MainWindow::on_actionDeepestDecode_triggered()
{
m_ndepth=(m_ndepth&48) + 3;
ui->actionDeepestDecode->setChecked(true);
}
void MainWindow::on_actionInclude_averaging_triggered()
{
m_ndepth=m_ndepth ^ 16;
ui->actionInclude_averaging->setChecked(m_ndepth&16);
}
void MainWindow::on_actionInclude_correlation_triggered()
{
m_ndepth=m_ndepth ^ 32;
ui->actionInclude_correlation->setChecked(m_ndepth&32);
}
void MainWindow::on_inGain_valueChanged(int n)
{
m_inGain=n;
}
void MainWindow::on_actionErase_ALL_TXT_triggered() //Erase ALL.TXT
{
int ret = QMessageBox::warning(this, "Confirm Erase",
"Are you sure you want to erase file ALL.TXT ?",
QMessageBox::Yes | QMessageBox::No, QMessageBox::Yes);
if(ret==QMessageBox::Yes) {
QFile f {m_dataDir.absoluteFilePath ("ALL.TXT")};
f.remove();
m_RxLog=1;
}
}
void MainWindow::on_actionErase_wsjtx_log_adi_triggered()
{
int ret = QMessageBox::warning(this, "Confirm Erase",
"Are you sure you want to erase file wsjtx_log.adi ?",
QMessageBox::Yes | QMessageBox::No, QMessageBox::Yes);
if(ret==QMessageBox::Yes) {
QFile f {m_dataDir.absoluteFilePath ("wsjtx_log.adi")};
f.remove();
}
}
void MainWindow::on_actionOpen_log_directory_triggered ()
{
QDesktopServices::openUrl (QUrl::fromLocalFile (m_dataDir.absolutePath ()));
}
bool MainWindow::gridOK(QString g)
{
bool b=false;
if(g.length()>=4) {
b=g.mid(0,1).compare("A")>=0 and
g.mid(0,1).compare("R")<=0 and
g.mid(1,1).compare("A")>=0 and
g.mid(1,1).compare("R")<=0 and
g.mid(2,1).compare("0")>=0 and
g.mid(2,1).compare("9")<=0 and
g.mid(3,1).compare("0")>=0 and
g.mid(3,1).compare("9")<=0;
}
return b;
}
void MainWindow::on_bandComboBox_currentIndexChanged (int index)
{
auto const& frequencies = m_config.frequencies ();
auto const& source_index = frequencies->mapToSource (frequencies->index (index, FrequencyList::frequency_column));
Frequency frequency {m_freqNominal};
if (source_index.isValid ())
{
frequency = frequencies->frequency_list ()[source_index.row ()].frequency_;
m_callingFrequency = frequency;
}
// Lookup band
auto const& band = m_config.bands ()->find (frequency);
if (!band.isEmpty ())
{
ui->bandComboBox->lineEdit ()->setStyleSheet ({});
ui->bandComboBox->setCurrentText (band);
}
else
{
ui->bandComboBox->lineEdit ()->setStyleSheet ("QLineEdit {color: yellow; background-color : red;}");
ui->bandComboBox->setCurrentText (m_config.bands ()->oob ());
}
displayDialFrequency ();
}
void MainWindow::on_bandComboBox_activated (int index)
{
auto const& frequencies = m_config.frequencies ();
auto const& source_index = frequencies->mapToSource (frequencies->index (index, FrequencyList::frequency_column));
Frequency frequency {m_freqNominal};
if (source_index.isValid ())
{
frequency = frequencies->frequency_list ()[source_index.row ()].frequency_;
}
m_bandEdited = true;
band_changed (frequency);
m_wideGraph->setRxBand (m_config.bands ()->find (frequency));
}
void MainWindow::band_changed (Frequency f)
{
if (m_bandEdited) {
if (!m_mode.startsWith ("WSPR")) { // band hopping preserves auto Tx
if (f + m_wideGraph->nStartFreq () > m_freqNominal + ui->TxFreqSpinBox->value ()
|| f + m_wideGraph->nStartFreq () + m_wideGraph->fSpan () <=
m_freqNominal + ui->TxFreqSpinBox->value ()) {
// qDebug () << "start f:" << m_wideGraph->nStartFreq () << "span:" << m_wideGraph->fSpan () << "DF:" << ui->TxFreqSpinBox->value ();
// disable auto Tx if "blind" QSY outside of waterfall
ui->stopTxButton->click (); // halt any transmission
auto_tx_mode (false); // disable auto Tx
}
else {
// adjust DF:s
int shift = f - m_freqNominal;
ui->RxFreqSpinBox->setValue (ui->RxFreqSpinBox->value () - shift);
if (!m_config.enable_VHF_features ()) // for VHF & up we fix the Tx DF
{
ui->TxFreqSpinBox->setValue (ui->TxFreqSpinBox->value () - shift);
}
}
}
m_lastBand.clear ();
m_bandEdited = false;
psk_Reporter->sendReport(); // Upload any queued spots before changing band
if (!m_transmitting) monitor (true);
m_freqNominal = f;
m_freqTxNominal = m_freqNominal;
if (m_astroWidget) m_astroWidget->nominal_frequency (m_freqNominal, m_freqTxNominal);
setRig ();
setXIT (ui->TxFreqSpinBox->value ());
m_repeatMsg = 0; // reset Tx watchdog
}
}
void MainWindow::enable_DXCC_entity (bool on)
{
if (on and !m_mode.startsWith ("WSPR") and m_mode!="Echo") {
m_logBook.init(); // re-read the log and cty.dat files
ui->gridLayout->setColumnStretch(0,55); // adjust proportions of text displays
ui->gridLayout->setColumnStretch(1,45);
} else {
ui->gridLayout->setColumnStretch(0,0);
ui->gridLayout->setColumnStretch(1,0);
}
updateGeometry ();
}
void MainWindow::on_pbCallCQ_clicked()
{
genStdMsgs(m_rpt);
ui->genMsg->setText(ui->tx6->text());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
if(m_transmitting) m_restart=true;
}
void MainWindow::on_pbAnswerCaller_clicked()
{
genStdMsgs(m_rpt);
QString t=ui->tx3->text();
int i0=t.indexOf(" R-");
if(i0<0) i0=t.indexOf(" R+");
t=t.mid(0,i0+1)+t.mid(i0+2,3);
ui->genMsg->setText(t);
m_ntx=7;
ui->rbGenMsg->setChecked(true);
if(m_transmitting) m_restart=true;
}
void MainWindow::on_pbSendRRR_clicked()
{
genStdMsgs(m_rpt);
ui->genMsg->setText(ui->tx4->text());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
if(m_transmitting) m_restart=true;
}
void MainWindow::on_pbAnswerCQ_clicked()
{
genStdMsgs(m_rpt);
ui->genMsg->setText(ui->tx1->text());
QString t=ui->tx2->text();
int i0=t.indexOf("/");
int i1=t.indexOf(" ");
if(i0>0 and i0<i1) ui->genMsg->setText(t);
m_ntx=7;
ui->rbGenMsg->setChecked(true);
if(m_transmitting) m_restart=true;
}
void MainWindow::on_pbSendReport_clicked()
{
genStdMsgs(m_rpt);
ui->genMsg->setText(ui->tx3->text());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
if(m_transmitting) m_restart=true;
}
void MainWindow::on_pbSend73_clicked()
{
genStdMsgs(m_rpt);
ui->genMsg->setText(ui->tx5->currentText());
m_ntx=7;
ui->rbGenMsg->setChecked(true);
if(m_transmitting) m_restart=true;
}
void MainWindow::on_rbGenMsg_clicked(bool checked)
{
m_freeText=!checked;
if(!m_freeText) {
if(m_ntx != 7 && m_transmitting) m_restart=true;
m_ntx=7;
}
}
void MainWindow::on_rbFreeText_clicked(bool checked)
{
m_freeText=checked;
if(m_freeText) {
m_ntx=8;
if (m_transmitting) m_restart=true;
}
}
void MainWindow::on_freeTextMsg_currentTextChanged (QString const& text)
{
msgtype(text, ui->freeTextMsg->lineEdit ());
}
void MainWindow::on_rptSpinBox_valueChanged(int n)
{
m_rpt=QString::number(n);
int ntx0=m_ntx;
QString t=ui->tx5->currentText();
genStdMsgs(m_rpt);
ui->tx5->setCurrentText(t);
m_ntx=ntx0;
if(m_ntx==1) ui->txrb1->setChecked(true);
if(m_ntx==2) ui->txrb2->setChecked(true);
if(m_ntx==3) ui->txrb3->setChecked(true);
if(m_ntx==4) ui->txrb4->setChecked(true);
if(m_ntx==5) ui->txrb5->setChecked(true);
if(m_ntx==6) ui->txrb6->setChecked(true);
statusChanged();
}
void MainWindow::on_tuneButton_clicked (bool checked)
{
if (m_tune) {
tuneButtonTimer.start(250);
} else {
m_sentFirst73=false;
m_repeatMsg=0;
itone[0]=0;
on_monitorButton_clicked (true);
m_tune_attenuation_restore = ui->outAttenuation->value();
if (m_tune_attenuation)
{
m_block_pwr_tooltip = true;
ui->outAttenuation->setValue(m_tune_attenuation);
m_block_pwr_tooltip = false;
}
m_tune=true;
}
Q_EMIT tune (checked);
}
void MainWindow::stop_tuning ()
{
on_tuneButton_clicked(false);
ui->tuneButton->setChecked (false);
m_bTxTime=false;
m_tune=false;
if (m_tune_attenuation)
{
m_block_pwr_tooltip = true;
ui->outAttenuation->setValue(m_tune_attenuation_restore);
m_block_pwr_tooltip = false;
}
}
void MainWindow::stopTuneATU()
{
on_tuneButton_clicked(false);
m_bTxTime=false;
}
void MainWindow::on_stopTxButton_clicked() //Stop Tx
{
if (m_tune) stop_tuning ();
if (m_auto and !m_tuneup) auto_tx_mode (false);
m_btxok=false;
m_repeatMsg=0;
}
void MainWindow::rigOpen ()
{
update_dynamic_property (ui->readFreq, "state", "warning");
ui->readFreq->setText ("");
ui->readFreq->setEnabled (true);
m_config.transceiver_online ();
Q_EMIT m_config.sync_transceiver (true, true);
}
void MainWindow::on_pbR2T_clicked()
{
if (ui->TxFreqSpinBox->isEnabled ()) ui->TxFreqSpinBox->setValue(ui->RxFreqSpinBox->value ());
}
void MainWindow::on_pbT2R_clicked()
{
if (ui->RxFreqSpinBox->isEnabled ())
{
ui->RxFreqSpinBox->setValue (ui->TxFreqSpinBox->value ());
}
}
void MainWindow::on_readFreq_clicked()
{
if (m_transmitting) return;
if (m_config.transceiver_online ())
{
Q_EMIT m_config.sync_transceiver (true, true);
}
}
void MainWindow::on_pbTxMode_clicked()
{
if(m_modeTx=="JT9") {
m_modeTx="JT65";
ui->pbTxMode->setText("Tx JT65 #");
} else {
m_modeTx="JT9";
ui->pbTxMode->setText("Tx JT9 @");
}
m_wideGraph->setModeTx(m_modeTx);
statusChanged();
}
void MainWindow::setXIT(int n, Frequency base)
{
if (m_transmitting && !m_config.tx_QSY_allowed ()) return;
if (!base) base = m_freqNominal;
m_XIT = 0;
if (!m_bSimplex) {
// m_bSimplex is false, so we can use split mode if requested
if (m_config.split_mode () && !m_config.enable_VHF_features ()) {
// Don't use XIT for VHF & up
m_XIT=(n/500)*500 - 1500;
}
if ((m_monitoring || m_transmitting)
&& m_config.is_transceiver_online ()
&& m_config.split_mode ())
{
// All conditions are met, reset the transceiver Tx dial
// frequency
m_freqTxNominal = base + m_XIT;
if (m_astroWidget) m_astroWidget->nominal_frequency (m_freqNominal, m_freqTxNominal);
Q_EMIT m_config.transceiver_tx_frequency (m_freqTxNominal + m_astroCorrection.tx);
}
}
//Now set the audio Tx freq
Q_EMIT transmitFrequency (ui->TxFreqSpinBox->value () - m_XIT);
}
void MainWindow::setFreq4(int rxFreq, int txFreq)
{
if (ui->RxFreqSpinBox->isEnabled ())
{
ui->RxFreqSpinBox->setValue(rxFreq);
}
if(m_mode.startsWith ("WSPR")) {
ui->WSPRfreqSpinBox->setValue(txFreq);
} else {
if (ui->TxFreqSpinBox->isEnabled ()) {
ui->TxFreqSpinBox->setValue(txFreq);
}
else if (m_config.enable_VHF_features ()
&& (Qt::ControlModifier & QApplication::keyboardModifiers ())) {
// for VHF & up we adjust Tx dial frequency to equalize Tx to Rx
// when user CTRL+clicks on waterfall
auto temp = ui->TxFreqSpinBox->value ();
m_freqNominal += txFreq - temp;
m_freqTxNominal += txFreq - temp;
ui->RxFreqSpinBox->setValue (temp);
if (m_astroWidget) m_astroWidget->nominal_frequency (m_freqNominal, m_freqTxNominal);
setRig ();
setXIT (ui->TxFreqSpinBox->value ());
}
}
}
void MainWindow::on_cbTxLock_clicked(bool checked)
{
m_lockTxFreq=checked;
m_wideGraph->setLockTxFreq(m_lockTxFreq);
if(m_lockTxFreq) on_pbR2T_clicked();
}
void MainWindow::handle_transceiver_update (Transceiver::TransceiverState const& s)
{
// qDebug () << "MainWindow::handle_transceiver_update:" << s;
Transceiver::TransceiverState old_state {m_rigState};
//transmitDisplay (s.ptt ());
m_rigState = s;
if (old_state.online () == false && s.online () == true)
{
// initializing
on_monitorButton_clicked (!m_config.monitor_off_at_startup ());
}
if (s.frequency () != old_state.frequency () || s.split () != m_splitMode)
{
m_splitMode = s.split ();
if (!s.ptt ()) //!m_transmitting)
{
auto temp = m_freqNominal;
m_freqNominal = s.frequency () - m_astroCorrection.rx;
if (temp != m_freqNominal)
{
m_freqTxNominal = m_freqNominal;
}
if (m_monitoring)
{
m_lastMonitoredFrequency = m_freqNominal;
}
if (m_lastDialFreq != m_freqNominal and ((m_mode!="JTMSK" and m_mode!="MSK144") or
!ui->cbCQRx->isChecked())) {
m_lastDialFreq = m_freqNominal;
m_repeatMsg=0;
m_secBandChanged=QDateTime::currentMSecsSinceEpoch()/1000;
if(s.frequency () < 30000000u && !m_mode.startsWith ("WSPR")) {
// Write freq changes to ALL.TXT only below 30 MHz.
QFile f2 {m_dataDir.absoluteFilePath ("ALL.TXT")};
if (f2.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Append)) {
QTextStream out(&f2);
out << QDateTime::currentDateTimeUtc().toString("yyyy-MMM-dd hh:mm")
<< " " << qSetRealNumberPrecision (12) << (m_freqNominal / 1.e6) << " MHz "
<< m_mode << endl;
f2.close();
} else {
msgBox("Cannot open \"" + f2.fileName () + "\" for append:" + f2.errorString ());
}
}
if (m_config.spot_to_psk_reporter ()) {
pskSetLocal ();
}
statusChanged();
m_wideGraph->setDialFreq(m_freqNominal / 1.e6);
}
} else {
m_freqTxNominal = s.split () ? s.tx_frequency () - m_astroCorrection.tx : s.frequency ();
}
if (m_astroWidget) m_astroWidget->nominal_frequency (m_freqNominal, m_freqTxNominal);
}
// ensure frequency display is correct
if (m_astroWidget && old_state.ptt () != s.ptt ()) setRig ();
displayDialFrequency ();
update_dynamic_property (ui->readFreq, "state", "ok");
ui->readFreq->setEnabled (false);
ui->readFreq->setText (s.split () ? "S" : "");
}
void MainWindow::handle_transceiver_failure (QString const& reason)
{
update_dynamic_property (ui->readFreq, "state", "error");
ui->readFreq->setEnabled (true);
on_stopTxButton_clicked ();
rigFailure ("Rig Control Error", reason);
}
void MainWindow::rigFailure (QString const& reason, QString const& detail)
{
if (m_first_error)
{
// one automatic retry
QTimer::singleShot (0, this, SLOT (rigOpen ()));
m_first_error = false;
}
else
{
m_rigErrorMessageBox.setText (reason);
m_rigErrorMessageBox.setDetailedText (detail);
// don't call slot functions directly to avoid recursion
switch (m_rigErrorMessageBox.exec ())
{
case QMessageBox::Ok:
QTimer::singleShot (0, this, SLOT (on_actionSettings_triggered ()));
break;
case QMessageBox::Retry:
QTimer::singleShot (0, this, SLOT (rigOpen ()));
break;
case QMessageBox::Cancel:
QTimer::singleShot (0, this, SLOT (close ()));
break;
}
m_first_error = true; // reset
}
}
void MainWindow::transmit (double snr)
{
double toneSpacing=0.0;
if (m_modeTx == "JT65") {
if(m_nSubMode==0) toneSpacing=11025.0/4096.0;
if(m_nSubMode==1) toneSpacing=2*11025.0/4096.0;
if(m_nSubMode==2) toneSpacing=4*11025.0/4096.0;
Q_EMIT sendMessage (NUM_JT65_SYMBOLS,
4096.0*12000.0/11025.0, ui->TxFreqSpinBox->value () - m_XIT,
toneSpacing, m_soundOutput, m_config.audio_output_channel (),
true, false, snr, m_TRperiod);
}
if (m_modeTx == "QRA") {
if(m_nSubMode==0) toneSpacing=11025.0/4096.0;
if(m_nSubMode==1) toneSpacing=2*11025.0/4096.0;
if(m_nSubMode==2) toneSpacing=4*11025.0/4096.0;
Q_EMIT sendMessage (NUM_QRA_SYMBOLS,
4096.0*12000.0/11025.0, ui->TxFreqSpinBox->value () - m_XIT,
toneSpacing, m_soundOutput, m_config.audio_output_channel (),
true, false, snr, m_TRperiod);
}
if (m_modeTx == "JT9") {
int nsub=pow(2,m_nSubMode);
int nsps[]={480,240,120,60};
double sps=m_nsps;
m_toneSpacing=nsub*12000.0/6912.0;
bool fastmode=false;
if(m_bFast9 and (m_nSubMode>=4)) {
fastmode=true;
sps=nsps[m_nSubMode-4];
m_toneSpacing=12000.0/sps;
}
Q_EMIT sendMessage (NUM_JT9_SYMBOLS, sps,
ui->TxFreqSpinBox->value() - m_XIT, m_toneSpacing,
m_soundOutput, m_config.audio_output_channel (),
true, fastmode, snr, m_TRperiod);
}
if (m_modeTx == "JTMSK" or m_modeTx == "MSK144") {
m_nsps=6;
m_FFTSize = 7 * 512;
Q_EMIT FFTSize (m_FFTSize);
m_toneSpacing=6000.0/m_nsps;
double f0=1000.0;
int nsym;
if (m_modeTx == "JTMSK") {
nsym=NUM_JTMSK_SYMBOLS;
if(itone[35] < 0) nsym=35;
} else {
nsym=NUM_MSK144_SYMBOLS;
}
Q_EMIT sendMessage (nsym, double(m_nsps), f0, m_toneSpacing,
m_soundOutput, m_config.audio_output_channel (),
true, true, snr, m_TRperiod);
}
if (m_modeTx == "JT4") {
if(m_nSubMode==0) toneSpacing=4.375;
if(m_nSubMode==1) toneSpacing=2*4.375;
if(m_nSubMode==2) toneSpacing=4*4.375;
if(m_nSubMode==3) toneSpacing=9*4.375;
if(m_nSubMode==4) toneSpacing=18*4.375;
if(m_nSubMode==5) toneSpacing=36*4.375;
if(m_nSubMode==6) toneSpacing=72*4.375;
Q_EMIT sendMessage (NUM_JT4_SYMBOLS,
2520.0*12000.0/11025.0, ui->TxFreqSpinBox->value () - m_XIT,
toneSpacing, m_soundOutput, m_config.audio_output_channel (),
true, false, snr, m_TRperiod);
}
if (m_mode=="WSPR-2") { //### Similar code needed for WSPR-15 ###
Q_EMIT sendMessage (NUM_WSPR_SYMBOLS, 8192.0,
ui->TxFreqSpinBox->value() - 1.5 * 12000 / 8192, m_toneSpacing,
m_soundOutput, m_config.audio_output_channel(),
true, false, snr, m_TRperiod);
}
if(m_mode=="Echo") {
//??? should use "fastMode = true" here ???
Q_EMIT sendMessage (27, 1024.0, 1500.0, 0.0, m_soundOutput,
m_config.audio_output_channel(),
false, false, snr, m_TRperiod);
}
if(m_mode=="ISCAT") {
double sps,f0;
if(m_nSubMode==0) {
sps=512.0*12000.0/11025.0;
toneSpacing=11025.0/512.0;
f0=47*toneSpacing;
} else {
sps=256.0*12000.0/11025.0;
toneSpacing=11025.0/256.0;
f0=13*toneSpacing;
}
Q_EMIT sendMessage (NUM_ISCAT_SYMBOLS, sps, f0, toneSpacing, m_soundOutput,
m_config.audio_output_channel(),
true, true, snr, m_TRperiod);
}
// In auto-sequencing mode, stop after 5 transmissions of "73" message.
if(m_mode=="JT9" and m_bFast9 and ui->cbEME->isChecked()) {
if(m_ntx==5) {
m_nTx73 += 1;
} else {
m_nTx73=0;
}
}
}
void MainWindow::on_outAttenuation_valueChanged (int a)
{
QString tt_str;
qreal dBAttn {a / 10.}; // slider interpreted as dB / 100
if (m_tune && Qt::ShiftModifier == QGuiApplication::keyboardModifiers ())
{
// special attenuation value for Tune button
m_tune_attenuation = a;
if (a)
{
tt_str = tr ("Tune digital gain ")
+ (a ? QString::number (-dBAttn, 'f', 1) : "0") + "dB\n"
"Set at top to cancel";
}
else
{
tt_str = tr ("Tune power = Tx power");
}
}
else
{
tt_str = tr ("Transmit digital gain ")
+ (a ? QString::number (-dBAttn, 'f', 1) : "0") + "dB";
}
if (!m_block_pwr_tooltip)
{
QToolTip::showText (QCursor::pos (), tt_str, ui->outAttenuation);
}
Q_EMIT outAttenuationChanged (dBAttn);
}
void MainWindow::on_actionShort_list_of_add_on_prefixes_and_suffixes_triggered()
{
if (!m_prefixes)
{
m_prefixes.reset (new HelpTextWindow {tr ("Prefixes"), ":/prefixes.txt", {"Courier", 10}});
}
m_prefixes->showNormal();
m_prefixes->raise ();
}
bool MainWindow::shortList(QString callsign)
{
int n=callsign.length();
int i1=callsign.indexOf("/");
Q_ASSERT(i1>0 and i1<n);
QString t1=callsign.mid(0,i1);
QString t2=callsign.mid(i1+1,n-i1-1);
bool b=(m_pfx.contains(t1) or m_sfx.contains(t2));
return b;
}
void MainWindow::pskSetLocal ()
{
// find the station row, if any, that matches the band we are on
auto stations = m_config.stations ();
auto matches = stations->match (stations->index (0, StationList::band_column)
, Qt::DisplayRole
, ui->bandComboBox->currentText ()
, 1
, Qt::MatchExactly);
QString antenna_description;
if (!matches.isEmpty ()) {
antenna_description = stations->index (matches.first ().row ()
, StationList::description_column).data ().toString ();
}
// qDebug() << "To PSKreporter: local station details";
psk_Reporter->setLocalStation(m_config.my_callsign (), m_config.my_grid (),
antenna_description, QString {"WSJT-X v" + version() + " " +
m_revision}.simplified ());
}
void MainWindow::transmitDisplay (bool transmitting)
{
if (transmitting == m_transmitting) {
if (transmitting) {
ui->signal_meter_widget->setValue(0);
if (m_monitoring) monitor (false);
m_btxok=true;
}
auto QSY_allowed = !transmitting or m_config.tx_QSY_allowed () or
!m_config.split_mode ();
if (ui->cbTxLock->isChecked ()) {
ui->RxFreqSpinBox->setEnabled (QSY_allowed);
ui->pbT2R->setEnabled (QSY_allowed);
}
if (!m_mode.startsWith ("WSPR")) {
if(m_config.enable_VHF_features ()) {
// used fixed 1000Hz Tx DF for VHF & up QSO modes
ui->TxFreqSpinBox->setValue(1000);
ui->TxFreqSpinBox->setEnabled (false);
ui->cbTxLock->setChecked(false);
ui->cbTxLock->setEnabled(false);
} else {
ui->TxFreqSpinBox->setEnabled (QSY_allowed and !m_bFastMode);
ui->pbR2T->setEnabled (QSY_allowed);
ui->cbTxLock->setEnabled (QSY_allowed);
}
}
// the following are always disallowed in transmit
ui->menuMode->setEnabled (!transmitting);
//ui->bandComboBox->setEnabled (!transmitting);
if (!transmitting) {
if (m_mode == "JT9+JT65") {
// allow mode switch in Rx when in dual mode
ui->pbTxMode->setEnabled (true);
}
} else {
ui->pbTxMode->setEnabled (false);
}
}
}
void MainWindow::on_sbFtol_valueChanged(int index)
{
int tol[] = {10,20,50,100,200,500,1000};
m_FtolIndex=index;
m_Ftol=tol[index-21];
m_wideGraph->setTol(m_Ftol);
}
void::MainWindow::VHF_controls_visible(bool b)
{
ui->VHFControls_widget->setVisible (b);
ui->cbFast9->setVisible(b);
}
void::MainWindow::VHF_features_enabled(bool b)
{
if(!b and (ui->actionInclude_averaging->isChecked() or
ui->actionInclude_correlation->isChecked())) {
on_actionDeepestDecode_triggered();
}
ui->actionInclude_averaging->setEnabled(b);
ui->actionInclude_correlation->setEnabled(b);
ui->actionMessage_averaging->setEnabled(b);
if(!b and m_msgAvgWidget!=NULL) {
if(m_msgAvgWidget->isVisible()) m_msgAvgWidget->close();
}
}
void MainWindow::on_cbEME_toggled(bool b)
{
m_bEME=b;
}
void MainWindow::on_sbTR_valueChanged(int index)
{
m_TRindex=index;
// if(!m_bFastMode and n>m_nSubMode) m_MinW=m_nSubMode;
if(m_bFastMode) {
m_TRperiod=ui->sbTR->cleanText().toInt();
if(m_TRperiod<5 or m_TRperiod>30) m_TRperiod=30;
m_TRperiodFast=m_TRperiod;
progressBar->setMaximum(m_TRperiod);
}
if(m_monitoring) {
on_stopButton_clicked();
on_monitorButton_clicked(true);
}
if(m_transmitting) {
on_stopTxButton_clicked();
}
m_modulator->setPeriod(m_TRperiod); // TODO - not thread safe
m_detector->setPeriod(m_TRperiod); // TODO - not thread safe
m_wideGraph->setPeriod(m_TRperiod,m_nsps);
}
void MainWindow::on_sbSubmode_valueChanged(int n)
{
m_nSubMode=n;
m_wideGraph->setSubMode(m_nSubMode);
QString t1=(QString)QChar(short(m_nSubMode+65));
mode_label->setText(m_mode + " " + t1);
if(m_mode=="ISCAT") {
if(m_nSubMode==0) ui->TxFreqSpinBox->setValue(1012);
if(m_nSubMode==1) ui->TxFreqSpinBox->setValue(560);
}
if(m_mode=="JT9") {
if(m_nSubMode<4) {
ui->cbFast9->setChecked(false);
on_cbFast9_clicked(false);
ui->cbFast9->setEnabled(false);
ui->sbTR->setVisible(false);
m_TRperiod=60;
} else {
ui->cbFast9->setEnabled(true);
}
ui->sbTR->setVisible(m_bFast9);
if(m_bFast9) ui->TxFreqSpinBox->setValue(700);
}
if(m_transmitting and m_bFast9 and m_nSubMode>=4) transmit(99.0);
}
void MainWindow::on_cbFast9_clicked(bool b)
{
if(m_mode=="JT9") {
m_bFast9=b;
on_actionJT9_triggered();
}
if(b) {
/*
if(m_mode!="JTMSK") {
Q_EMIT m_config.transceiver_tx_frequency (0); // turn off split
}
*/
ui->cbEME->setText("Auto Seq");
if(m_TRperiodFast>0) m_TRperiod=m_TRperiodFast;
} else {
ui->cbEME->setText("EME delay");
m_TRperiod=60;
}
progressBar->setMaximum(m_TRperiod);
m_wideGraph->setPeriod(m_TRperiod,m_nsps);
fast_config(b);
}
void MainWindow::on_cbShMsgs_toggled(bool b)
{
ui->cbTx6->setEnabled(b);
m_bShMsgs=b;
if(m_bShMsgs and (m_mode=="JTMSK" or m_mode=="JTMSK")) ui->rptSpinBox->setValue(26);
int itone0=itone[0];
int ntx=m_ntx;
genStdMsgs(m_rpt);
itone[0]=itone0;
if(ntx==1) ui->txrb1->setChecked(true);
if(ntx==2) ui->txrb2->setChecked(true);
if(ntx==3) ui->txrb3->setChecked(true);
if(ntx==4) ui->txrb4->setChecked(true);
if(ntx==5) ui->txrb5->setChecked(true);
if(ntx==6) ui->txrb6->setChecked(true);
}
void MainWindow::on_cbTx6_toggled(bool b)
{
QString t;
if(b) {
t="@1250 (SEND MSGS)";
} else {
t="@1000 (TUNE)";
}
ui->tx6->setText(t);
}
// Takes a decoded CQ line and sets it up for reply
void MainWindow::replyToCQ (QTime time, qint32 snr, float delta_time, quint32 delta_frequency, QString const& mode, QString const& message_text)
{
if (!m_config.accept_udp_requests ())
{
return;
}
auto decode_parts = message_text.split (' ', QString::SkipEmptyParts);
if (decode_parts[0] == "CQ"
|| decode_parts[0] == "CQDX"
|| decode_parts[0] == "QRZ")
{
// a message we are willing to accept
QString format_string {"%1 %2 %3 %4 %5 %6"};
auto cqtext = format_string.arg (time.toString ("hhmm"))
.arg (snr, 3)
.arg (delta_time, 4, 'f', 1)
.arg (delta_frequency, 4)
.arg (mode)
.arg (message_text);
auto messages = ui->decodedTextBrowser->toPlainText ();
auto position = messages.lastIndexOf (cqtext);
if (position < 0)
{
// try again with with -0.0 delta time
position = messages.lastIndexOf (format_string.arg (time.toString ("hhmm"))
.arg (snr, 3)
.arg ('-' + QString::number (delta_time, 'f', 1), 4)
.arg (delta_frequency, 4)
.arg (mode)
.arg (message_text));
}
if (position >= 0)
{
if (m_config.udpWindowToFront ())
{
show ();
raise ();
activateWindow ();
}
if (m_config.udpWindowRestore () && isMinimized ())
{
showNormal ();
raise ();
}
// find the linefeed at the end of the line
position = ui->decodedTextBrowser->toPlainText().indexOf("\n",position);
processMessage (messages, position, false);
}
else
{
qDebug () << "reply to CQ request ignored, decode not found:" << cqtext;
}
}
else
{
qDebug () << "rejecting UDP request to reply as decode is not a CQ or QRZ";
}
}
void MainWindow::replayDecodes ()
{
// we accept this request even if the setting to accept UDP requests
// is not checked
// attempt to parse the decoded text
Q_FOREACH (auto const& message, ui->decodedTextBrowser->toPlainText ().split ('\n', QString::SkipEmptyParts))
{
if (message.size() >= 4 && message.left (4) != "----")
{
auto const& parts = message.split (' ', QString::SkipEmptyParts);
if (parts.size () >= 5 && parts[3].contains ('.')) // WSPR
{
postWSPRDecode (false, parts);
}
else
{
auto eom_pos = message.indexOf (' ', 35);
// we always want at least the characters to position 35
if (eom_pos < 35)
{
eom_pos = message.size () - 1;
}
postDecode (false, message.left (eom_pos + 1));
}
}
}
statusChanged ();
}
void MainWindow::postDecode (bool is_new, QString const& message)
{
auto const& decode = message.trimmed ();
auto const& parts = decode.left (22).split (' ', QString::SkipEmptyParts);
if (parts.size () >= 5)
{
m_messageClient->decode (is_new, QTime::fromString (parts[0], "hhmm"), parts[1].toInt ()
, parts[2].toFloat (), parts[3].toUInt (), parts[4][0], decode.mid (22));
}
}
void MainWindow::postWSPRDecode (bool is_new, QStringList parts)
{
if (parts.size () < 8)
{
parts.insert (6, "");
}
m_messageClient->WSPR_decode (is_new, QTime::fromString (parts[0], "hhmm"), parts[1].toInt ()
, parts[2].toFloat (), Radio::frequency (parts[3].toFloat (), 6)
, parts[4].toInt (), parts[5].remove ("&lt;").remove ("&gt;")
, parts[6], parts[7].toInt ());
}
void MainWindow::networkError (QString const& e)
{
if (QMessageBox::Retry == QMessageBox::warning (this, tr ("Network Error")
, tr ("Error: %1\nUDP server %2:%3")
.arg (e)
.arg (m_config.udp_server_name ())
.arg (m_config.udp_server_port ())
, QMessageBox::Cancel | QMessageBox::Retry, QMessageBox::Cancel))
{
// retry server lookup
m_messageClient->set_server (m_config.udp_server_name ());
}
}
void MainWindow::on_syncSpinBox_valueChanged(int n)
{
m_minSync=n;
}
void MainWindow::p1ReadFromStdout() //p1readFromStdout
{
QString t1;
while(p1.canReadLine()) {
QString t(p1.readLine());
if(t.indexOf("<DecodeFinished>") >= 0) {
m_bDecoded = m_nWSPRdecodes > 0;
if(!m_diskData) {
WSPR_history(m_dialFreqRxWSPR, m_nWSPRdecodes);
if(m_nWSPRdecodes==0 and ui->band_hopping_group_box->isChecked()) {
t = " Receiving " + m_mode + " ----------------------- " +
m_config.bands ()->find (m_dialFreqRxWSPR);
t=WSPR_hhmm(-60) + ' ' + t.rightJustified (66, '-');
ui->decodedTextBrowser->appendText(t);
}
killFileTimer.start (45*1000); //Kill in 45s
}
m_nWSPRdecodes=0;
ui->DecodeButton->setChecked (false);
if(m_uploadSpots
&& m_config.is_transceiver_online ()) { // need working rig control
float x=qrand()/((double)RAND_MAX + 1.0);
int msdelay=20000*x;
uploadTimer.start(msdelay); //Upload delay
} else {
QFile f(QDir::toNativeSeparators(m_dataDir.absolutePath()) + "/wspr_spots.txt");
if(f.exists()) f.remove();
}
m_RxLog=0;
m_startAnother=m_loopall;
m_blankLine=true;
m_decoderBusy = false;
statusUpdate ();
} else {
int n=t.length();
t=t.mid(0,n-2) + " ";
t.remove(QRegExp("\\s+$"));
QStringList rxFields = t.split(QRegExp("\\s+"));
QString rxLine;
QString grid="";
if ( rxFields.count() == 8 ) {
rxLine = QString("%1 %2 %3 %4 %5 %6 %7 %8")
.arg(rxFields.at(0), 4)
.arg(rxFields.at(1), 4)
.arg(rxFields.at(2), 5)
.arg(rxFields.at(3), 11)
.arg(rxFields.at(4), 4)
.arg(rxFields.at(5).leftJustified (12).replace ('<', "&lt;").replace ('>', "&gt;"))
.arg(rxFields.at(6), -6)
.arg(rxFields.at(7), 3);
postWSPRDecode (true, rxFields);
grid = rxFields.at(6);
} else if ( rxFields.count() == 7 ) { // Type 2 message
rxLine = QString("%1 %2 %3 %4 %5 %6 %7 %8")
.arg(rxFields.at(0), 4)
.arg(rxFields.at(1), 4)
.arg(rxFields.at(2), 5)
.arg(rxFields.at(3), 11)
.arg(rxFields.at(4), 4)
.arg(rxFields.at(5).leftJustified (12).replace ('<', "&lt;").replace ('>', "&gt;"))
.arg("", -6)
.arg(rxFields.at(6), 3);
postWSPRDecode (true, rxFields);
} else {
rxLine = t;
}
if(grid!="") {
double utch=0.0;
int nAz,nEl,nDmiles,nDkm,nHotAz,nHotABetter;
azdist_(const_cast <char *> (m_config.my_grid ().toLatin1().constData()),
const_cast <char *> (grid.toLatin1().constData()),&utch,
&nAz,&nEl,&nDmiles,&nDkm,&nHotAz,&nHotABetter,6,6);
QString t1;
if(m_config.miles()) {
t1.sprintf("%7d",nDmiles);
} else {
t1.sprintf("%7d",nDkm);
}
rxLine += t1;
}
if (m_config.insert_blank () && m_blankLine) {
QString band;
Frequency f=1000000.0*rxFields.at(3).toDouble()+0.5;
band = ' ' + m_config.bands ()->find (f);
ui->decodedTextBrowser->appendText(band.rightJustified (71, '-'));
m_blankLine = false;
}
m_nWSPRdecodes += 1;
ui->decodedTextBrowser->appendText(rxLine);
}
}
}
QString MainWindow::WSPR_hhmm(int n)
{
QDateTime t=QDateTime::currentDateTimeUtc().addSecs(n);
int m=t.toString("hhmm").toInt()/2;
QString t1;
t1.sprintf("%04d",2*m);
return t1;
}
void MainWindow::WSPR_history(Frequency dialFreq, int ndecodes)
{
QDateTime t=QDateTime::currentDateTimeUtc().addSecs(-60);
QString t1=t.toString("yyMMdd");
QString t2=WSPR_hhmm(-60);
QString t3;
t3.sprintf("%13.6f",0.000001*dialFreq);
if(ndecodes<0) {
t1=t1 + " " + t2 + t3 + " T";
} else {
QString t4;
t4.sprintf("%4d",ndecodes);
t1=t1 + " " + t2 + t3 + " R" + t4;
}
QFile f {m_dataDir.absoluteFilePath ("WSPR_history.txt")};
if (f.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Append)) {
QTextStream out(&f);
out << t1 << endl;
f.close();
} else {
msgBox("Cannot open \"" + f.fileName () + "\" for append:" + f.errorString ());
}
}
void MainWindow::uploadSpots()
{
// do not spot replays or if rig control not working
if(m_diskData || !m_config.is_transceiver_online ()) return;
if(m_uploading) {
qDebug() << "Previous upload has not completed, spots were lost";
wsprNet->abortOutstandingRequests ();
m_uploading = false;
}
QString rfreq = QString("%1").arg(0.000001*(m_dialFreqRxWSPR + 1500), 0, 'f', 6);
QString tfreq = QString("%1").arg(0.000001*(m_dialFreqRxWSPR +
ui->TxFreqSpinBox->value()), 0, 'f', 6);
wsprNet->upload(m_config.my_callsign(), m_config.my_grid(), rfreq, tfreq,
m_mode, QString::number(ui->autoButton->isChecked() ? m_pctx : 0),
QString::number(m_dBm), version(),
QDir::toNativeSeparators(m_dataDir.absolutePath()) + "/wspr_spots.txt");
m_uploading = true;
}
void MainWindow::uploadResponse(QString response)
{
if (response == "done") {
m_uploading=false;
} else {
if (response.startsWith ("Upload Failed")) {
m_uploading=false;
}
qDebug () << "WSPRnet.org status:" << response;
}
}
void MainWindow::on_TxPowerComboBox_currentIndexChanged(const QString &arg1)
{
int i1=arg1.indexOf(" ");
m_dBm=arg1.mid(0,i1).toInt();
}
void MainWindow::on_sbTxPercent_valueChanged(int n)
{
m_pctx=n;
if(m_pctx>0) {
ui->pbTxNext->setEnabled(true);
} else {
m_txNext=false;
ui->pbTxNext->setChecked(false);
ui->pbTxNext->setEnabled(false);
}
}
void MainWindow::on_cbUploadWSPR_Spots_toggled(bool b)
{
m_uploadSpots=b;
if(m_uploadSpots) ui->cbUploadWSPR_Spots->setStyleSheet("");
if(!m_uploadSpots) ui->cbUploadWSPR_Spots->setStyleSheet(
"QCheckBox{background-color: yellow}");
}
void MainWindow::on_WSPRfreqSpinBox_valueChanged(int n)
{
ui->TxFreqSpinBox->setValue(n);
}
void MainWindow::on_pbTxNext_clicked(bool b)
{
m_txNext=b;
}
void MainWindow::WSPR_scheduling ()
{
m_WSPR_tx_next = false;
if (m_config.is_transceiver_online () // need working rig control for hopping
&& !m_config.is_dummy_rig ()
&& ui->band_hopping_group_box->isChecked ()) {
auto hop_data = m_WSPR_band_hopping.next_hop (m_auto);
qDebug () << "hop data: period:" << hop_data.period_name_
<< "frequencies index:" << hop_data.frequencies_index_
<< "tune:" << hop_data.tune_required_
<< "tx:" << hop_data.tx_next_;
m_WSPR_tx_next = hop_data.tx_next_;
if (hop_data.frequencies_index_ >= 0) { // new band
ui->bandComboBox->setCurrentIndex (hop_data.frequencies_index_);
on_bandComboBox_activated (hop_data.frequencies_index_);
m_cmnd.clear ();
QStringList prefixes {".bat", ".cmd", ".exe", ""};
for (auto const& prefix : prefixes)
{
auto const& path = m_appDir + "/user_hardware" + prefix;
QFile f {path};
if (f.exists ()) {
m_cmnd = QDir::toNativeSeparators (f.fileName ()) + ' ' +
m_config.bands ()->find (m_freqNominal).remove ('m');
}
}
if(m_cmnd!="") p3.start(m_cmnd); // Execute user's hardware controller
// Produce a short tuneup signal
m_tuneup = false;
if (hop_data.tune_required_) {
m_tuneup = true;
on_tuneButton_clicked (true);
tuneATU_Timer.start (2500);
}
}
// Display grayline status
auto_tx_label->setText (hop_data.period_name_);
}
else {
m_WSPR_tx_next = m_WSPR_band_hopping.next_is_tx ();
}
}
void MainWindow::astroUpdate ()
{
if (m_astroWidget)
{
auto correction = m_astroWidget->astroUpdate(QDateTime::currentDateTimeUtc (),
m_config.my_grid(), m_hisGrid,
m_freqNominal,
"Echo" == m_mode, m_transmitting,
!m_config.tx_QSY_allowed (), m_TRperiod);
// no Doppler correction while CTRL pressed allows manual tuning
if (Qt::ControlModifier & QApplication::queryKeyboardModifiers ()) return;
// no Doppler correction in Tx if rig can't do it
if (m_transmitting && !m_config.tx_QSY_allowed ()) return;
if (!m_astroWidget->doppler_tracking ()) return;
if ((m_monitoring || m_transmitting)
// no Doppler correction below 6m
&& m_freqNominal >= 50000000
&& m_config.split_mode ())
{
// adjust for rig resolution
if (m_config.transceiver_resolution () > 1)
{
correction.rx = (correction.rx + 50) / 100 * 100;
correction.tx = (correction.tx + 50) / 100 * 100;
}
else if (m_config.transceiver_resolution () > 0)
{
correction.rx = (correction.rx + 5) / 10 * 10;
correction.tx = (correction.tx + 5) / 10 * 10;
}
else if (m_config.transceiver_resolution () < -1)
{
correction.rx = correction.rx / 100 * 100;
correction.tx = correction.tx / 100 * 100;
}
else if (m_config.transceiver_resolution () < 0)
{
correction.rx = correction.rx / 10 * 10;
correction.tx = correction.tx / 10 * 10;
}
m_astroCorrection = correction;
}
else
{
m_astroCorrection = {};
}
setRig ();
}
}
void MainWindow::setRig ()
{
if(m_transmitting && !m_config.tx_QSY_allowed ()) return;
if ((m_monitoring || m_transmitting)
&& m_config.is_transceiver_online ())
{
if(m_transmitting && m_config.split_mode ())
{
Q_EMIT m_config.transceiver_tx_frequency (m_freqTxNominal + m_astroCorrection.tx);
}
else
{
Q_EMIT m_config.transceiver_frequency (m_freqNominal + m_astroCorrection.rx);
}
}
}
void MainWindow::fastPick(int x0, int x1, int y)
{
if(m_mode!="ISCAT") return;
if(!m_decoderBusy) {
dec_data.params.newdat=0;
dec_data.params.nagain=1;
m_blankLine=false; // don't insert the separator again
m_nPick=1;
if(y > 120) m_nPick=2;
m_t0Pick=x0*512.0/12000.0;
m_t1Pick=x1*512.0/12000.0;
decode();
}
}
void MainWindow::on_actionSave_reference_spectrum_triggered()
{
if(!m_monitoring) on_monitorButton_clicked (true);
m_bRefSpec=true;
}
void MainWindow::on_sbCQRxFreq_valueChanged(int n)
{
m_freqCQ=n;
genStdMsgs(m_rpt);
CQRxFreq();
}
void MainWindow::on_cbCQRx_toggled(bool b)
{
ui->sbCQRxFreq->setEnabled(b);
genStdMsgs(m_rpt);
if(b) {
ui->txrb6->setChecked(true);
m_ntx=6;
}
CQRxFreq();
}
void MainWindow::CQRxFreq()
{
Frequency rx_frequency {m_config.offsetRxFreq () && ui->cbCQRx->isChecked () ?
m_freqNominal / 1000000 * 1000000 + 1000 * m_freqCQ :
m_callingFrequency};
if (m_config.is_transceiver_online ()) {
Q_EMIT m_config.transceiver_frequency (rx_frequency);
}
}
void MainWindow::statusUpdate () const
{
if (ui)
{
m_messageClient->status_update (m_freqNominal, m_mode, m_hisCall,
QString::number (ui->rptSpinBox->value ()),
m_modeTx, ui->autoButton->isChecked (),
m_transmitting, m_decoderBusy,
ui->RxFreqSpinBox->value (), ui->TxFreqSpinBox->value (),
m_config.my_callsign (), m_config.my_grid (),
m_hisGrid);
}
}