Steve Franke dfceef3662 Fix up ft8sim so that it prints a warning when SNR is set too high so that data will be clipped.		2018-12-07 11:10:25 -06:00
..
77bit	Add suggested message type i3.n3 = 0.6.	2018-11-21 10:17:16 -05:00
fsk4hf	Remove a small bias in Watterson channel simulator channel amplitude.	2018-10-25 16:39:17 -05:00
ft8	Fix up ft8sim so that it prints a warning when SNR is set too high so that data will be clipped.	2018-12-07 11:10:25 -06:00
ftrsd	Implement AP decoding for JT65 (VHF/UHF/Microwave only).	2017-12-02 16:04:51 +00:00
qra
qso50	Test program to exercise features of the "WSPR QSO mode" that was tested briefly in 2008.	2018-01-31 15:45:06 +00:00
wsprcode	Updates and additions to test progams.	2017-04-27 17:43:21 +00:00
wsprd	Fix a couple of WSPR memory leaks and remove some compiler warnings	2018-11-12 13:58:35 +00:00
addit.f90
afc9.f90
afc65b.f90	Further improvements for decoding drifting JT65 signals.	2018-04-02 18:57:08 +00:00
all_fft.out
allsim.f90
ana64.f90
ana932.f90
analytic.f90
astro0.f90
astro.f90
astrosub.f90
avecho.f90
averms.f90
avg4.f90
azdist.f90	Correct a longstanding flaw in azdist(). This change should be committed to the v1.8.1 tag.	2017-12-14 13:49:06 +00:00
baddata.f90
badmsg.f90
bpdecode40.f90	Fix some typos, two of which were found by Cristo, lz2hv.	2016-09-01 14:05:53 +00:00
bpdecode128_90.f90	Working toward whole-hog switchover to new LDPC code with 77 bit messages in MSK144.	2018-07-07 09:44:52 -05:00
bpdecode128_90.f90.save	Working toward whole-hog switchover to new LDPC code with 77 bit messages in MSK144.	2018-07-07 09:44:52 -05:00
bpdecode144.f90
calibrate.f90
ccf2.f90	Minor tweaks to JT65 decoding.	2017-11-28 20:46:00 +00:00
ccf65.f90
char.h	Merging code for v1.1 back into the main wsjtx branch.	2013-07-08 13:17:22 +00:00
chkcall.f90	1. Alt+F8 arms "Call 1st" as if a CQ had been sent.	2017-07-20 15:15:00 +00:00
chkfft2.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
chkfft3.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
chkfft.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
chkfft.txt
chkhist.f90
chkmsg.f90
chkss2.f90
code426.f90
constants.f90
contest72.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
conv232.f90	Rename library directory	2012-10-03 14:31:43 +00:00
coord.f90
count4.f90	Simple program to analyze ALL.TXT files for JT4 mode.	2015-05-29 19:25:12 +00:00
CQnnnCAT.txt
crc10.cpp
crc13.cpp	Add routines that will implement 77-bit messages for MSK144. Initial tests will use a (128,90) code.	2018-06-13 09:40:04 -05:00
crc14.cpp	Add crc14.cpp	2018-03-22 14:18:14 +00:00
crc.f90	Housekeeping. Remove unused code and unused variables. Silence some compiler warnings.	2018-12-05 16:06:33 -06:00
db.f90
decode4.f90
decode9w.f90	New simulator jt49sim, replaces both jt4sim and jt9sim. Fix the S/N estimates made for slow/wide JT9 submodes.	2018-04-25 17:24:58 +00:00
decode65a.f90	Improve AFC action for JT65, especially submodes B and C.	2018-04-02 17:24:18 +00:00
decode65b.f90	Implement AP decoding for JT65 (VHF/UHF/Microwave only).	2017-12-02 16:04:51 +00:00
decode_rs.c	Fix the errors caused by fixing warnings!	2016-04-06 22:49:03 +00:00
decoder.f90	Housekeeping. Remove unused code and unused variables. Silence some compiler warnings.	2018-12-05 16:06:33 -06:00
deep4.f90
deg2grid.f90	Eliminate all compiler warnings from gfortran, in Ubuntu 12.04.	2013-05-23 13:33:29 +00:00
degrade_snr.f90
demod64a.f90	Experimental changes to JT65 decoder:	2017-10-22 00:09:01 +00:00
determ.f90
digi-contest.txt	Update the contest ideas.	2018-06-14 11:31:16 -04:00
downsam9.f90
dxped_fifo.f90
DXped_Operations.txt	Update the DXped_Op document.	2017-11-22 15:30:28 +00:00
DXped_pseudo_code.txt
emedop.dat	We might possibly want to use "emedop" again...	2018-10-03 20:10:51 +01:00
emedop.f90	We might possibly want to use "emedop" again...	2018-10-03 20:10:51 +01:00
encode4.f90	Old-style "NA VHF Contest" mode removed from all Fortran routines.	2018-07-10 15:09:42 -04:00
encode232.f90	Reintegrate the wsjtx_exp branch into the trunk	2015-05-27 13:08:28 +00:00
encode_128_90.f90	Working toward whole-hog switchover to new LDPC code with 77 bit messages in MSK144.	2018-07-07 09:44:52 -05:00
encode_msk40.f90
encode_rs.c
entail.f90
ephem.f90
extract4.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
extract.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
extractmessage77.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
fano232.f90
fast9.f90
fast_decode.f90
fcal.f90
fchisq0.f90
fchisq65.f90
fchisq.f90
fer
fer65.f90	Add submode to argument list of JT9 subroutine decode().	2016-04-01 17:57:08 +00:00
fersum.f90	Add submode to argument list of JT9 subroutine decode().	2016-04-01 17:57:08 +00:00
fftw3.f03
fftw3.f90	Convert all *.f files to *.f90.	2013-05-22 15:39:28 +00:00
fftw3mod.f90
fil3.f90
fil3c.f90
fil4.f90
fil61.f90
fil6521.f90
filbig.f90	Make Fortran profiling timer function a callback with a default null implementation	2015-12-27 15:40:57 +00:00
fitcal.f90
fix_contest_msg.f90
fixwav.f90
flat1.f90
flat1a.f90
flat1b.f90	Much improved detection of sync in JT4 decoder.	2016-05-19 19:19:47 +00:00
flat2.f90
flat4.f90
flat65.f90
fmeasure.f90
fmtave.f90
fmtmsg.f90	Make fmtmsg aware of both message sizes, 22 and 37 chars.	2018-12-05 08:19:59 -05:00
foldspec9f.f90
four2a.f90
fox_rx.f90	More code cleanup.	2017-11-09 21:33:20 +00:00
fox_sim.f90
fox_tx.f90
fqso_first.f90
freqcal.f90
ft8_decode.f90	Fix an egregious bug and another not-so-egregious bug. The egregious bug prevented decodes of most signals with negative DT.	2018-12-03 07:18:52 -06:00
g1
g1.bat
g2.bat
g3.bat
g4.bat
gen4.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
gen9.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
gen65.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
geniscat.f90
genmet.f90
genmsk40.f90	Fix bug that prevented generation of MSK144 Sh messages with extended callsign. Change all MSK144 Sh code to use 12-char mycall and hiscall and 37-char messages. Hash full extended callsigns (not just base call) and print full callsigns, e.g. <KP4/K1JT K9AN> RRR	2018-10-05 20:56:22 -05:00
genmsk_128_90.f90	Fix bug that prevented generation of MSK144 Sh messages with extended callsign. Change all MSK144 Sh code to use 12-char mycall and hiscall and 37-char messages. Hash full extended callsigns (not just base call) and print full callsigns, e.g. <KP4/K1JT K9AN> RRR	2018-10-05 20:56:22 -05:00
genqra64.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
genwspr.f90	Failed to save before commit. Fixed now.	2016-10-07 17:52:48 +00:00
geodist.f90
getlags.f90
getmet4.f90
go_chkfft.cmd
golay24_table.c
gran.c
graycode65.f90
graycode.f90	Rename library directory	2012-10-03 14:31:43 +00:00
grayline.f90
grid2deg.f90	Convert all *.f files to *.f90.	2013-05-22 15:39:28 +00:00
hash.f90
hashing.f90
hint65.f90	Old-style "NA VHF Contest" mode removed from all Fortran routines.	2018-07-10 15:09:42 -04:00
hspec.f90	Pass nContest value to hspec.f90.	2018-07-27 09:45:14 -04:00
igray.c
image.f90
indexx.f90
init_random_seed.c
init_random_seed.f90
init_random_seed.h
init_rs.c
int.h
inter_wspr.f90
interleave4.f90	Reintegrate Joe's experimental VHF & up features	2015-04-22 17:48:03 +00:00
interleave8.f90
interleave9.f90
interleave63.f90
ipcomm.cpp	Get rid of jt9com and npar common blocks	2015-12-17 20:29:55 +00:00
iscat.f90
iso_c_utilities.f90
jplsubs.f
jt4_decode.f90	Code cleanup and improvement in the JT4 decoder.	2018-07-23 12:42:50 -04:00
jt4.f90
jt4a.f90
jt4code.f90	Reintegrate Joe's experimental VHF & up features	2015-04-22 17:48:03 +00:00
jt4sim.f90
jt9_decode.f90
jt9.f90	Get rid of unused variable ldecode77.	2018-11-05 14:40:55 -06:00
jt9a.f90	Code cleanup.	2017-06-27 20:50:17 +00:00
jt9code.f90	Fix minor flaws in reporting bad messages by jt65code and jt9code.	2018-08-31 11:22:06 -04:00
jt9com.f90	Get rid of unused variable ldecode77.	2018-11-05 14:40:55 -06:00
jt9fano.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
jt9sim.f90
jt9sync.f90
jt9w.f90
jt49sim.f90	Code cleanup and improvement in the JT4 decoder.	2018-07-23 12:42:50 -04:00
jt65_decode.f90	Attempt to improve calibration of JT65 V/U/M SNR estimates.	2018-01-01 22:11:36 +00:00
jt65_mod.f90
jt65_test.f90	Experimental implementation of AP decoding for JT65 - configured for testing only. Not usable on the air.	2017-11-04 17:03:56 +00:00
jt65.f90
jt65code.f90	Fix minor flaws in reporting bad messages by jt65code and jt9code.	2018-08-31 11:22:06 -04:00
jt65sim.f90	Add frequency drift (Hz/min) option to jt65sim.	2018-12-01 09:17:58 -06:00
jtmsg.f90	Prevent a certain type of non-standard message from being flagged as a false decode.	2017-07-22 13:21:03 +00:00
ldpc32_table.c	Change msk32 messages to (32,16) code (no sync word) with 6-bit report and 10-bit hash. No decoder yet.	2016-07-26 23:14:30 +00:00
ldpc_128_90_b_generator.f90	Add 'code b' - a better (128,90) code. Code b has irregular column weights - 80% weight 3 and 20% weight 4.	2018-06-14 15:38:58 -05:00
ldpc_128_90_b_reordered_parity.f90	Add 'code b' - a better (128,90) code. Code b has irregular column weights - 80% weight 3 and 20% weight 4.	2018-06-14 15:38:58 -05:00
ldpc_128_90_generator.f90	Add routines that will implement 77-bit messages for MSK144. Initial tests will use a (128,90) code.	2018-06-13 09:40:04 -05:00
ldpc_128_90_reordered_parity.f90	Add routines that will implement 77-bit messages for MSK144. Initial tests will use a (128,90) code.	2018-06-13 09:40:04 -05:00
ldpcsim40.f90
ldpcsim128_90.f90	unpack77 now returns logical variable unpk77_success, which will be .false. if there is something obviously wrong with the message. Still to do: set the flag if the unpacked message contains CQ in an implausible place.	2018-09-12 15:06:26 -05:00
libration.f90
lorentzian.f90
lpf1.f90
Makefile
Makefile.jt9w	More work toward a usable reference spectrum.	2016-04-08 20:03:29 +00:00
Makefile.jt9w_Win
Makefile.jt65	Starting to build JTMSK short messages into WSJT-X. Beware: this will NOT	2016-01-21 17:53:34 +00:00
Makefile.jt65_osx	Commit working OS X Makefile for jt65/jt65sim.	2015-12-14 15:50:12 +00:00
Makefile.jt65_Win
Makefile.jtsdk	Improved, simplified sort routine; faster and better "flatten"	2015-02-11 00:50:35 +00:00
Makefile.linux
Makefile.MinGW
Makefile.MinGW.qt4
Makefile.msk
makepings.f90
met8.21
mixlpf.f90	Reintegrate the wsjtx_exp branch into the trunk	2015-05-27 13:08:28 +00:00
moondopjpl.f90
morse.f90
move.f90
msgs.txt
msk40_freq_search.f90
msk40decodeframe.f90	Fix bug that prevented generation of MSK144 Sh messages with extended callsign. Change all MSK144 Sh code to use 12-char mycall and hiscall and 37-char messages. Hash full extended callsigns (not just base call) and print full callsigns, e.g. <KP4/K1JT K9AN> RRR	2018-10-05 20:56:22 -05:00
msk40spd.f90	Fix bug that prevented generation of MSK144 Sh messages with extended callsign. Change all MSK144 Sh code to use 12-char mycall and hiscall and 37-char messages. Hash full extended callsigns (not just base call) and print full callsigns, e.g. <KP4/K1JT K9AN> RRR	2018-10-05 20:56:22 -05:00
msk40sync.f90	More progress on MSK40 decoder. THIS REVISION IS NOT INTENDED FOR USE ON THE AIR.	2016-10-03 20:18:53 +00:00
msk144_freq_search.f90
msk144_testmsg.f90	Make msk144code work. Rename msk144d2 to msk144d and make it work too.	2018-10-19 19:42:31 -05:00
msk144code.f90	Housekeeping. Remove unused code and unused variables. Silence some compiler warnings.	2018-12-05 16:06:33 -06:00
msk144decodeframe.f90	Housekeeping. Remove unused code and unused variables. Silence some compiler warnings.	2018-12-05 16:06:33 -06:00
msk144signalquality.f90	Make sure that msksignalquality is not called on Sh decodes to avoid contamination of recent_calls array and resulting poor SWL performance in MSK144 mode.	2018-10-20 13:55:02 -05:00
msk144sim.f90	Housekeeping. Remove unused code and unused variables. Silence some compiler warnings.	2018-12-05 16:06:33 -06:00
msk144spd.f90	Make MSK144 SWL mode work. Needs testing\!	2018-09-24 15:10:57 -05:00
msk144sync.f90
mskber.f90
mskdt.f90
mskrtd.f90	Make sure that msksignalquality is not called on Sh decodes to avoid contamination of recent_calls array and resulting poor SWL performance in MSK144 mode.	2018-10-20 13:55:02 -05:00
nfft.dat
nfft.out
noisegen.f90
options.f90
packjt.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
pctile.f90
peakdt9.f90
peakup.f90
pfx.f90
platanh.f90	Remove obsolete routines related to msk144.	2018-11-23 15:10:44 -06:00
plotsave.f90	Fix allocation logic for allocatable array sw.	2018-01-26 18:41:09 +00:00
pltanh.f90	Remove obsolete routines related to msk144.	2018-11-23 15:10:44 -06:00
polyfit.f90
prcom.f90
prog_args.f90
ps4.f90
psk_parse.f90
ptt.c
qra64a.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
qra64code.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
qratest.f90
readwav.f90
rectify_msk.f90
refspectrum.f90	Make refspec filter causal for overlap and add.	2017-07-16 00:10:37 +00:00
rig_control.c	Backed out the changes from r3171 to r3172 -- too buggy at present.	2013-04-15 21:13:31 +00:00
rs.h
savec2.f90
sec_midn.f90	Rename library directory	2012-10-03 14:31:43 +00:00
setup65.f90
sfrsd.f90
sgran.c
sh65.f90
sh65snr.f90
shell.f90
slasubs.f	EME Doppler calculations now use JPL Planetary Ephemeris.	2015-06-02 16:43:40 +00:00
sleep_msec.f90	1. Fixed issue with jt9 process not sleeping under Linux.	2013-03-26 14:00:51 +00:00
sleep.h	Rename library directory	2012-10-03 14:31:43 +00:00
slope.f90	Minor tweaks to JT65 decoding.	2017-11-28 20:46:00 +00:00
smo121.f90
smo.f90
smolorentz.f90
softsym9f.f90
softsym9w.f90	New simulator jt49sim, replaces both jt4sim and jt9sim. Fix the S/N estimates made for slow/wide JT9 submodes.	2018-04-25 17:24:58 +00:00
softsym.f90
sort.f90	Reintegrate merge from wsjtx_exp branch.	2015-11-18 01:28:12 +00:00
spec9f.f90
spec64.f90
ss.bat
stats.f90	Integrate the latest algorithm for hinted decoding.	2016-01-08 20:51:13 +00:00
stdmsg.f90	Diagnostic write should include callsign hash vlues.	2018-09-21 11:13:01 -04:00
subtract65.f90	Make Fortran profiling timer function a callback with a default null implementation	2015-12-27 15:40:57 +00:00
sun.f90	Another bunch needesd for astro display.	2014-03-05 20:14:36 +00:00
symspec2.f90
symspec65.f90	Minor tweaks to JT65 decoding.	2017-11-28 20:46:00 +00:00
symspec.f90	Temporary commit of plotsave-related code. Not finished!	2018-01-17 15:32:45 +00:00
sync4.f90	Revert "Fix a typo."	2018-11-30 14:34:17 -05:00
sync9.f90	Binary branding	2016-06-21 00:13:52 +00:00
sync9f.f90
sync9w.f90
sync64.f90
sync65.f90	Starting branch hotfix-2.0.0-rc5.	2018-11-14 10:44:36 -05:00
synciscat.f90
syncmsk.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
t6.f90	Reintegrate merge from wsjtx_exp branch.	2015-11-18 01:28:12 +00:00
tab.c	Rename library directory	2012-10-03 14:31:43 +00:00
test_init_random_seed.f90
testfast9.f90	Reintegrate merge from wsjtx_exp branch.	2015-11-18 01:28:12 +00:00
testmsg.f90	Fix minor flaws in reporting bad messages by jt65code and jt9code.	2018-08-31 11:22:06 -04:00
timefft_opts.f90
timefft.f90
timer_C_wrapper.f90	Make Fortran profiling timer function a callback with a default null implementation	2015-12-27 15:40:57 +00:00
timer_common.inc
timer_impl.f90
timer_module.f90
timf2.f90	Reintegrate the wsjtx_exp branch into the trunk	2015-05-27 13:08:28 +00:00
tmoonsub.c
to_contest_msg.f90
tstrig.c
tstrig.h
tweak1.f90
twkfreq65.f90
twkfreq.f90
update_hasharray.f90	Fix bug that prevented generation of MSK144 Sh messages with extended callsign. Change all MSK144 Sh code to use 12-char mycall and hiscall and 37-char messages. Hash full extended callsigns (not just base call) and print full callsigns, e.g. <KP4/K1JT K9AN> RRR	2018-10-05 20:56:22 -05:00
update_recent_calls.f90
usleep.c	Made a start at implementing an option to use multi-threaded FFTs.	2015-01-30 21:28:10 +00:00
vit213.c	Fix the errors caused by fixing warnings!	2016-04-06 22:49:03 +00:00
vit216.c
wav11.f90
wav12.f90	Tidy up WAV file reading and fix WAV input rate conversion defect	2016-03-10 19:48:54 +00:00
wavhdr.f90	Reintegrate merge from wsjtx_exp branch.	2015-11-18 01:28:12 +00:00
wisdom1.bat
wisdom.c
wqdecode.f90
wqencode.f90
wrapkarn.c
wsjt_modes.txt
wspr_downsample.f90
xcall.txt
xcor4.f90	Protect against a bounds error.	2018-08-31 13:55:44 -04:00
xcor.f90
zplot9.f90	Many changes to the procedures for selecting decodable candidate JT9 signals.	2013-05-16 16:02:00 +00:00
zplt.f90