WSJT-X/Configuration.cpp

3043 lines
118 KiB
C++

#include "Configuration.hpp"
//
// Read me!
//
// This file defines a configuration dialog with the user. The general
// strategy is to expose agreed configuration parameters via a custom
// interface (See Configuration.hpp). The state exposed through this
// public interface reflects stored or derived data in the
// Configuration::impl object. The Configuration::impl structure is
// an implementation of the PIMPL (a.k.a. Cheshire Cat or compilation
// firewall) implementation hiding idiom that allows internal state to
// be completely removed from the public interface.
//
// There is a secondary level of parameter storage which reflects
// current settings UI state, these parameters are not copied to the
// state store that the public interface exposes until the
// Configuration:impl::accept() operation is successful. The accept()
// operation is tied to the settings OK button. The normal and most
// convenient place to store this intermediate settings UI state is in
// the data models of the UI controls, if that is not convenient then
// separate member variables must be used to store that state. It is
// important for the user experience that no publicly visible settings
// are changed while the settings UI are changed i.e. all settings
// changes must be deferred until the "OK" button is
// clicked. Conversely, all changes must be discarded if the settings
// UI "Cancel" button is clicked.
//
// There is a complication related to the radio interface since the
// this module offers the facility to test the radio interface. This
// test means that the public visibility to the radio being tested
// must be changed. To maintain the illusion of deferring changes
// until they are accepted, the original radio related settings are
// stored upon showing the UI and restored if the UI is dismissed by
// canceling.
//
// It should be noted that the settings UI lives as long as the
// application client that uses it does. It is simply shown and hidden
// as it is needed rather than creating it on demand. This strategy
// saves a lot of expensive UI drawing at the expense of a little
// storage and gives a convenient place to deliver settings values
// from.
//
// Here is an overview of the high level flow of this module:
//
// 1) On construction the initial environment is initialized and
// initial values for settings are read from the QSettings
// database. At this point default values for any new settings are
// established by providing a default value to the QSettings value
// queries. This should be the only place where a hard coded value for
// a settings item is defined. Any remaining one-time UI
// initialization is also done. At the end of the constructor a method
// initialize_models() is called to load the UI with the current
// settings values.
//
// 2) When the settings UI is displayed by a client calling the exec()
// operation, only temporary state need be stored as the UI state will
// already mirror the publicly visible settings state.
//
// 3) As the user makes changes to the settings UI only validation
// need be carried out since the UI control data models are used as
// the temporary store of unconfirmed settings. As some settings will
// depend on each other a validate() operation is available, this
// operation implements a check of any complex multi-field values.
//
// 4) If the user discards the settings changes by dismissing the UI
// with the "Cancel" button; the reject() operation is called. The
// reject() operation calls initialize_models() which will revert all
// the UI visible state to the values as at the initial exec()
// operation. No changes are moved into the data fields in
// Configuration::impl that reflect the settings state published by
// the public interface (Configuration.hpp).
//
// 5) If the user accepts the settings changes by dismissing the UI
// with the "OK" button; the accept() operation is called which calls
// the validate() operation again and, if it passes, the fields that
// are used to deliver the settings state are updated from the UI
// control models or other temporary state variables. At the end of
// the accept() operation, just before hiding the UI and returning
// control to the caller; the new settings values are stored into the
// settings database by a call to the write_settings() operation, thus
// ensuring that settings changes are saved even if the application
// crashes or is subsequently killed.
//
// 6) On destruction, which only happens when the application
// terminates, the settings are saved to the settings database by
// calling the write_settings() operation. This is largely redundant
// but is still done to save the default values of any new settings on
// an initial run.
//
// To add a new setting:
//
// 1) Update the UI with the new widget to view and change the value.
//
// 2) Add a member to Configuration::impl to store the accepted
// setting state. If the setting state is dynamic; add a new signal to
// broadcast the setting value.
//
// 3) Add a query method to the public interface (Configuration.hpp)
// to access the new setting value. If the settings is dynamic; this
// step is optional since value changes will be broadcast via a
// signal.
//
// 4) Add a forwarding operation to implement the new query (3) above.
//
// 5) Add a settings read call to read_settings() with a sensible
// default value. If the setting value is dynamic, add a signal emit
// call to broadcast the setting value change.
//
// 6) Add code to initialize_models() to load the widget control's
// data model with the current value.
//
// 7) If there is no convenient data model field, add a data member to
// store the proposed new value. Ensure this member has a valid value
// on exit from read_settings().
//
// 8) Add any required inter-field validation to the validate()
// operation.
//
// 9) Add code to the accept() operation to extract the setting value
// from the widget control data model and load it into the
// Configuration::impl member that reflects the publicly visible
// setting state. If the setting value is dynamic; add a signal emit
// call to broadcast any changed state of the setting.
//
// 10) Add a settings write call to save the setting value to the
// settings database.
//
#include <stdexcept>
#include <iterator>
#include <algorithm>
#include <functional>
#include <limits>
#include <cmath>
#include <QApplication>
#include <QMetaType>
#include <QList>
#include <QSettings>
#include <QAudioDeviceInfo>
#include <QAudioInput>
#include <QDialog>
#include <QAction>
#include <QFileDialog>
#include <QDir>
#include <QTemporaryFile>
#include <QFormLayout>
#include <QString>
#include <QStringList>
#include <QStringListModel>
#include <QLineEdit>
#include <QRegExpValidator>
#include <QIntValidator>
#include <QThread>
#include <QTimer>
#include <QStandardPaths>
#include <QFont>
#include <QFontDialog>
#include <QColorDialog>
#include <QSerialPortInfo>
#include <QScopedPointer>
#include <QDebug>
#include "pimpl_impl.hpp"
#include "qt_helpers.hpp"
#include "MetaDataRegistry.hpp"
#include "SettingsGroup.hpp"
#include "FrequencyLineEdit.hpp"
#include "CandidateKeyFilter.hpp"
#include "ForeignKeyDelegate.hpp"
#include "TransceiverFactory.hpp"
#include "Transceiver.hpp"
#include "Bands.hpp"
#include "IARURegions.hpp"
#include "Modes.hpp"
#include "FrequencyList.hpp"
#include "StationList.hpp"
#include "NetworkServerLookup.hpp"
#include "MessageBox.hpp"
#include "MaidenheadLocatorValidator.hpp"
#include "CallsignValidator.hpp"
#include "LotWUsers.hpp"
#include "ui_Configuration.h"
#include "moc_Configuration.cpp"
namespace
{
// these undocumented flag values when stored in (Qt::UserRole - 1)
// of a ComboBox item model index allow the item to be enabled or
// disabled
int const combo_box_item_enabled (32 | 1);
int const combo_box_item_disabled (0);
// QRegExp message_alphabet {"[- A-Za-z0-9+./?]*"};
QRegExp message_alphabet {"[- @A-Za-z0-9+./?#<>]*"};
// Magic numbers for file validation
constexpr quint32 qrg_magic {0xadbccbdb};
constexpr quint32 qrg_version {100}; // M.mm
}
//
// Dialog to get a new Frequency item
//
class FrequencyDialog final
: public QDialog
{
public:
using Item = FrequencyList_v2::Item;
explicit FrequencyDialog (IARURegions * regions_model, Modes * modes_model, QWidget * parent = nullptr)
: QDialog {parent}
{
setWindowTitle (QApplication::applicationName () + " - " +
tr ("Add Frequency"));
region_combo_box_.setModel (regions_model);
mode_combo_box_.setModel (modes_model);
auto form_layout = new QFormLayout ();
form_layout->addRow (tr ("IARU &Region:"), &region_combo_box_);
form_layout->addRow (tr ("&Mode:"), &mode_combo_box_);
form_layout->addRow (tr ("&Frequency (MHz):"), &frequency_line_edit_);
auto main_layout = new QVBoxLayout (this);
main_layout->addLayout (form_layout);
auto button_box = new QDialogButtonBox {QDialogButtonBox::Ok | QDialogButtonBox::Cancel};
main_layout->addWidget (button_box);
connect (button_box, &QDialogButtonBox::accepted, this, &FrequencyDialog::accept);
connect (button_box, &QDialogButtonBox::rejected, this, &FrequencyDialog::reject);
}
Item item () const
{
return {frequency_line_edit_.frequency ()
, Modes::value (mode_combo_box_.currentText ())
, IARURegions::value (region_combo_box_.currentText ())};
}
private:
QComboBox region_combo_box_;
QComboBox mode_combo_box_;
FrequencyLineEdit frequency_line_edit_;
};
//
// Dialog to get a new Station item
//
class StationDialog final
: public QDialog
{
public:
explicit StationDialog (StationList const * stations, Bands * bands, QWidget * parent = nullptr)
: QDialog {parent}
, filtered_bands_ {new CandidateKeyFilter {bands, stations, 0, 0}}
{
setWindowTitle (QApplication::applicationName () + " - " + tr ("Add Station"));
band_.setModel (filtered_bands_.data ());
auto form_layout = new QFormLayout ();
form_layout->addRow (tr ("&Band:"), &band_);
form_layout->addRow (tr ("&Offset (MHz):"), &delta_);
form_layout->addRow (tr ("&Antenna:"), &description_);
auto main_layout = new QVBoxLayout (this);
main_layout->addLayout (form_layout);
auto button_box = new QDialogButtonBox {QDialogButtonBox::Ok | QDialogButtonBox::Cancel};
main_layout->addWidget (button_box);
connect (button_box, &QDialogButtonBox::accepted, this, &StationDialog::accept);
connect (button_box, &QDialogButtonBox::rejected, this, &StationDialog::reject);
if (delta_.text ().isEmpty ())
{
delta_.setText ("0");
}
}
StationList::Station station () const
{
return {band_.currentText (), delta_.frequency_delta (), description_.text ()};
}
int exec () override
{
filtered_bands_->set_active_key ();
return QDialog::exec ();
}
private:
QScopedPointer<CandidateKeyFilter> filtered_bands_;
QComboBox band_;
FrequencyDeltaLineEdit delta_;
QLineEdit description_;
};
class RearrangableMacrosModel
: public QStringListModel
{
public:
Qt::ItemFlags flags (QModelIndex const& index) const override
{
auto flags = QStringListModel::flags (index);
if (index.isValid ())
{
// disallow drop onto existing items
flags &= ~Qt::ItemIsDropEnabled;
}
return flags;
}
};
//
// Class MessageItemDelegate
//
// Item delegate for message entry such as free text message macros.
//
class MessageItemDelegate final
: public QStyledItemDelegate
{
public:
explicit MessageItemDelegate (QObject * parent = nullptr)
: QStyledItemDelegate {parent}
{
}
QWidget * createEditor (QWidget * parent
, QStyleOptionViewItem const& /* option*/
, QModelIndex const& /* index */
) const override
{
auto editor = new QLineEdit {parent};
editor->setFrame (false);
editor->setValidator (new QRegExpValidator {message_alphabet, editor});
return editor;
}
};
// Internal implementation of the Configuration class.
class Configuration::impl final
: public QDialog
{
Q_OBJECT;
public:
using FrequencyDelta = Radio::FrequencyDelta;
using port_type = Configuration::port_type;
explicit impl (Configuration * self
, QNetworkAccessManager * network_manager
, QDir const& temp_directory
, QSettings * settings
, QWidget * parent);
~impl ();
bool have_rig ();
void transceiver_frequency (Frequency);
void transceiver_tx_frequency (Frequency);
void transceiver_mode (MODE);
void transceiver_ptt (bool);
void sync_transceiver (bool force_signal);
Q_SLOT int exec () override;
Q_SLOT void accept () override;
Q_SLOT void reject () override;
Q_SLOT void done (int) override;
private:
typedef QList<QAudioDeviceInfo> AudioDevices;
void read_settings ();
void write_settings ();
bool load_audio_devices (QAudio::Mode, QComboBox *, QAudioDeviceInfo *);
void update_audio_channels (QComboBox const *, int, QComboBox *, bool);
void initialize_models ();
bool split_mode () const
{
return
(WSJT_RIG_NONE_CAN_SPLIT || !rig_is_dummy_) &&
(rig_params_.split_mode != TransceiverFactory::split_mode_none);
}
void set_cached_mode ();
bool open_rig (bool force = false);
//bool set_mode ();
void close_rig ();
TransceiverFactory::ParameterPack gather_rig_data ();
void enumerate_rigs ();
void set_rig_invariants ();
bool validate ();
void fill_port_combo_box (QComboBox *);
Frequency apply_calibration (Frequency) const;
Frequency remove_calibration (Frequency) const;
void delete_frequencies ();
void load_frequencies ();
void merge_frequencies ();
void save_frequencies ();
void reset_frequencies ();
void insert_frequency ();
FrequencyList_v2::FrequencyItems read_frequencies_file (QString const&);
void delete_stations ();
void insert_station ();
void chk77();
Q_SLOT void on_font_push_button_clicked ();
Q_SLOT void on_decoded_text_font_push_button_clicked ();
Q_SLOT void on_PTT_port_combo_box_activated (int);
Q_SLOT void on_CAT_port_combo_box_activated (int);
Q_SLOT void on_CAT_serial_baud_combo_box_currentIndexChanged (int);
Q_SLOT void on_CAT_data_bits_button_group_buttonClicked (int);
Q_SLOT void on_CAT_stop_bits_button_group_buttonClicked (int);
Q_SLOT void on_CAT_handshake_button_group_buttonClicked (int);
Q_SLOT void on_CAT_poll_interval_spin_box_valueChanged (int);
Q_SLOT void on_split_mode_button_group_buttonClicked (int);
Q_SLOT void on_test_CAT_push_button_clicked ();
Q_SLOT void on_test_PTT_push_button_clicked (bool checked);
Q_SLOT void on_force_DTR_combo_box_currentIndexChanged (int);
Q_SLOT void on_force_RTS_combo_box_currentIndexChanged (int);
Q_SLOT void on_rig_combo_box_currentIndexChanged (int);
Q_SLOT void on_sound_input_combo_box_currentTextChanged (QString const&);
Q_SLOT void on_sound_output_combo_box_currentTextChanged (QString const&);
Q_SLOT void on_add_macro_push_button_clicked (bool = false);
Q_SLOT void on_delete_macro_push_button_clicked (bool = false);
Q_SLOT void on_PTT_method_button_group_buttonClicked (int);
Q_SLOT void on_add_macro_line_edit_editingFinished ();
Q_SLOT void delete_macro ();
void delete_selected_macros (QModelIndexList);
Q_SLOT void on_save_path_select_push_button_clicked (bool);
Q_SLOT void on_azel_path_select_push_button_clicked (bool);
Q_SLOT void on_calibration_intercept_spin_box_valueChanged (double);
Q_SLOT void on_calibration_slope_ppm_spin_box_valueChanged (double);
Q_SLOT void handle_transceiver_update (TransceiverState const&, unsigned sequence_number);
Q_SLOT void handle_transceiver_failure (QString const& reason);
Q_SLOT void on_pbCQmsg_clicked();
Q_SLOT void on_pbMyCall_clicked();
Q_SLOT void on_pbTxMsg_clicked();
Q_SLOT void on_pbNewDXCC_clicked();
Q_SLOT void on_pbNewDXCCband_clicked();
Q_SLOT void on_pbNewCall_clicked();
Q_SLOT void on_pbNewCallBand_clicked();
Q_SLOT void on_pbNewGrid_clicked();
Q_SLOT void on_pbNewGridBand_clicked();
Q_SLOT void on_pbLoTW_clicked();
Q_SLOT void on_pbResetDefaults_clicked();
Q_SLOT void on_cbFox_clicked (bool);
Q_SLOT void on_cbHound_clicked (bool);
Q_SLOT void on_cbx2ToneSpacing_clicked(bool);
Q_SLOT void on_cbx4ToneSpacing_clicked(bool);
Q_SLOT void on_rbNone_toggled(bool);
// typenames used as arguments must match registered type names :(
Q_SIGNAL void start_transceiver (unsigned seqeunce_number) const;
Q_SIGNAL void set_transceiver (Transceiver::TransceiverState const&,
unsigned sequence_number) const;
Q_SIGNAL void stop_transceiver () const;
Configuration * const self_; // back pointer to public interface
QThread * transceiver_thread_;
TransceiverFactory transceiver_factory_;
QList<QMetaObject::Connection> rig_connections_;
QScopedPointer<Ui::configuration_dialog> ui_;
QNetworkAccessManager * network_manager_;
QSettings * settings_;
QDir doc_dir_;
QDir data_dir_;
QDir temp_dir_;
QDir writeable_data_dir_;
QDir default_save_directory_;
QDir save_directory_;
QDir default_azel_directory_;
QDir azel_directory_;
QFont font_;
QFont next_font_;
QFont decoded_text_font_;
QFont next_decoded_text_font_;
LotWUsers lotw_users_;
bool restart_sound_input_device_;
bool restart_sound_output_device_;
Type2MsgGen type_2_msg_gen_;
QStringListModel macros_;
RearrangableMacrosModel next_macros_;
QAction * macro_delete_action_;
Bands bands_;
IARURegions regions_;
IARURegions::Region region_;
Modes modes_;
FrequencyList_v2 frequencies_;
FrequencyList_v2 next_frequencies_;
StationList stations_;
StationList next_stations_;
FrequencyDelta current_offset_;
FrequencyDelta current_tx_offset_;
QAction * frequency_delete_action_;
QAction * frequency_insert_action_;
QAction * load_frequencies_action_;
QAction * save_frequencies_action_;
QAction * merge_frequencies_action_;
QAction * reset_frequencies_action_;
FrequencyDialog * frequency_dialog_;
QAction * station_delete_action_;
QAction * station_insert_action_;
StationDialog * station_dialog_;
TransceiverFactory::ParameterPack rig_params_;
TransceiverFactory::ParameterPack saved_rig_params_;
TransceiverFactory::Capabilities::PortType last_port_type_;
bool rig_is_dummy_;
bool rig_active_;
bool have_rig_;
bool rig_changed_;
TransceiverState cached_rig_state_;
int rig_resolution_; // see Transceiver::resolution signal
CalibrationParams calibration_;
bool frequency_calibration_disabled_; // not persistent
unsigned transceiver_command_number_;
QString dynamic_grid_;
// configuration fields that we publish
QString my_callsign_;
QString my_grid_;
QString FD_exchange_;
QString RTTY_exchange_;
QColor color_CQ_;
QColor next_color_CQ_;
QColor color_MyCall_;
QColor next_color_MyCall_;
QColor color_TxMsg_;
QColor next_color_TxMsg_;
QColor color_DXCC_;
QColor next_color_DXCC_;
QColor color_DXCCband_;
QColor next_color_DXCCband_;
QColor color_NewCall_;
QColor next_color_NewCall_;
QColor color_NewCallBand_;
QColor next_color_NewCallBand_;
QColor color_NewGrid_;
QColor next_color_NewGrid_;
QColor color_NewGridBand_;
QColor next_color_NewGridBand_;
QColor color_LoTW_;
QColor next_color_LoTW_;
qint32 id_interval_;
qint32 ntrials_;
qint32 aggressive_;
qint32 RxBandwidth_;
double degrade_;
double txDelay_;
bool id_after_73_;
bool tx_QSY_allowed_;
bool spot_to_psk_reporter_;
bool monitor_off_at_startup_;
bool monitor_last_used_;
bool log_as_RTTY_;
bool report_in_comments_;
bool prompt_to_log_;
bool insert_blank_;
bool DXCC_;
bool ppfx_;
bool clear_DX_;
bool miles_;
bool quick_call_;
bool disable_TX_on_73_;
int watchdog_;
bool TX_messages_;
bool enable_VHF_features_;
bool decode_at_52s_;
bool single_decode_;
bool twoPass_;
bool bFox_;
bool bHound_;
bool bGenerate77_;
bool bDecode77_;
bool bNoSpecial_;
bool bFieldDay_;
bool bRTTYroundup_;
bool bNA_VHF_Contest_;
bool bEU_VHF_Contest_;
bool x2ToneSpacing_;
bool x4ToneSpacing_;
bool use_dynamic_grid_;
QString opCall_;
QString udp_server_name_;
port_type udp_server_port_;
QString n1mm_server_name_;
port_type n1mm_server_port_;
bool broadcast_to_n1mm_;
bool accept_udp_requests_;
bool udpWindowToFront_;
bool udpWindowRestore_;
DataMode data_mode_;
bool pwrBandTxMemory_;
bool pwrBandTuneMemory_;
QAudioDeviceInfo audio_input_device_;
bool default_audio_input_device_selected_;
AudioDevice::Channel audio_input_channel_;
QAudioDeviceInfo audio_output_device_;
bool default_audio_output_device_selected_;
AudioDevice::Channel audio_output_channel_;
friend class Configuration;
};
#include "Configuration.moc"
// delegate to implementation class
Configuration::Configuration (QNetworkAccessManager * network_manager, QDir const& temp_directory,
QSettings * settings, QWidget * parent)
: m_ {this, network_manager, temp_directory, settings, parent}
{
}
Configuration::~Configuration ()
{
}
QDir Configuration::doc_dir () const {return m_->doc_dir_;}
QDir Configuration::data_dir () const {return m_->data_dir_;}
QDir Configuration::writeable_data_dir () const {return m_->writeable_data_dir_;}
QDir Configuration::temp_dir () const {return m_->temp_dir_;}
void Configuration::select_tab (int index) {m_->ui_->configuration_tabs->setCurrentIndex (index);}
int Configuration::exec () {return m_->exec ();}
bool Configuration::is_active () const {return m_->isVisible ();}
QAudioDeviceInfo const& Configuration::audio_input_device () const {return m_->audio_input_device_;}
AudioDevice::Channel Configuration::audio_input_channel () const {return m_->audio_input_channel_;}
QAudioDeviceInfo const& Configuration::audio_output_device () const {return m_->audio_output_device_;}
AudioDevice::Channel Configuration::audio_output_channel () const {return m_->audio_output_channel_;}
bool Configuration::restart_audio_input () const {return m_->restart_sound_input_device_;}
bool Configuration::restart_audio_output () const {return m_->restart_sound_output_device_;}
auto Configuration::type_2_msg_gen () const -> Type2MsgGen {return m_->type_2_msg_gen_;}
QString Configuration::my_callsign () const {return m_->my_callsign_;}
QColor Configuration::color_CQ () const {return m_->color_CQ_;}
QColor Configuration::color_MyCall () const {return m_->color_MyCall_;}
QColor Configuration::color_TxMsg () const {return m_->color_TxMsg_;}
QColor Configuration::color_DXCC () const {return m_->color_DXCC_;}
QColor Configuration::color_DXCCband() const {return m_->color_DXCCband_;}
QColor Configuration::color_NewCall () const {return m_->color_NewCall_;}
QColor Configuration::color_NewCallBand () const {return m_->color_NewCallBand_;}
QColor Configuration::color_NewGrid () const {return m_->color_NewGrid_;}
QColor Configuration::color_NewGridBand () const {return m_->color_NewGridBand_;}
QColor Configuration::color_LoTW() const {return m_->color_LoTW_;}
QFont Configuration::text_font () const {return m_->font_;}
QFont Configuration::decoded_text_font () const {return m_->decoded_text_font_;}
qint32 Configuration::id_interval () const {return m_->id_interval_;}
qint32 Configuration::ntrials() const {return m_->ntrials_;}
qint32 Configuration::aggressive() const {return m_->aggressive_;}
double Configuration::degrade() const {return m_->degrade_;}
double Configuration::txDelay() const {return m_->txDelay_;}
qint32 Configuration::RxBandwidth() const {return m_->RxBandwidth_;}
bool Configuration::id_after_73 () const {return m_->id_after_73_;}
bool Configuration::tx_QSY_allowed () const {return m_->tx_QSY_allowed_;}
bool Configuration::spot_to_psk_reporter () const
{
// rig must be open and working to spot externally
return is_transceiver_online () && m_->spot_to_psk_reporter_;
}
bool Configuration::monitor_off_at_startup () const {return m_->monitor_off_at_startup_;}
bool Configuration::monitor_last_used () const {return m_->rig_is_dummy_ || m_->monitor_last_used_;}
bool Configuration::log_as_RTTY () const {return m_->log_as_RTTY_;}
bool Configuration::report_in_comments () const {return m_->report_in_comments_;}
bool Configuration::prompt_to_log () const {return m_->prompt_to_log_;}
bool Configuration::insert_blank () const {return m_->insert_blank_;}
bool Configuration::DXCC () const {return m_->DXCC_;}
bool Configuration::ppfx() const {return m_->ppfx_;}
bool Configuration::clear_DX () const {return m_->clear_DX_;}
bool Configuration::miles () const {return m_->miles_;}
bool Configuration::quick_call () const {return m_->quick_call_;}
bool Configuration::disable_TX_on_73 () const {return m_->disable_TX_on_73_;}
int Configuration::watchdog () const {return m_->watchdog_;}
bool Configuration::TX_messages () const {return m_->TX_messages_;}
bool Configuration::enable_VHF_features () const {return m_->enable_VHF_features_;}
bool Configuration::decode_at_52s () const {return m_->decode_at_52s_;}
bool Configuration::single_decode () const {return m_->single_decode_;}
bool Configuration::twoPass() const {return m_->twoPass_;}
bool Configuration::bFox() const {return m_->bFox_;}
bool Configuration::bHound() const {return m_->bHound_;}
bool Configuration::bGenerate77() const {return m_->bGenerate77_;}
bool Configuration::bDecode77() const {return m_->bDecode77_;}
bool Configuration::bNoSpecial() const {return m_->bNoSpecial_;}
bool Configuration::bFieldDay() const {return m_->bFieldDay_;}
bool Configuration::bRTTYroundup() const {return m_->bRTTYroundup_;}
bool Configuration::bNA_VHF_Contest() const {return m_->bNA_VHF_Contest_;}
bool Configuration::bEU_VHF_Contest() const {return m_->bEU_VHF_Contest_;}
bool Configuration::x2ToneSpacing() const {return m_->x2ToneSpacing_;}
bool Configuration::x4ToneSpacing() const {return m_->x4ToneSpacing_;}
bool Configuration::split_mode () const {return m_->split_mode ();}
QString Configuration::opCall() const {return m_->opCall_;}
QString Configuration::udp_server_name () const {return m_->udp_server_name_;}
auto Configuration::udp_server_port () const -> port_type {return m_->udp_server_port_;}
bool Configuration::accept_udp_requests () const {return m_->accept_udp_requests_;}
QString Configuration::n1mm_server_name () const {return m_->n1mm_server_name_;}
auto Configuration::n1mm_server_port () const -> port_type {return m_->n1mm_server_port_;}
bool Configuration::broadcast_to_n1mm () const {return m_->broadcast_to_n1mm_;}
bool Configuration::udpWindowToFront () const {return m_->udpWindowToFront_;}
bool Configuration::udpWindowRestore () const {return m_->udpWindowRestore_;}
Bands * Configuration::bands () {return &m_->bands_;}
Bands const * Configuration::bands () const {return &m_->bands_;}
StationList * Configuration::stations () {return &m_->stations_;}
StationList const * Configuration::stations () const {return &m_->stations_;}
IARURegions::Region Configuration::region () const {return m_->region_;}
FrequencyList_v2 * Configuration::frequencies () {return &m_->frequencies_;}
FrequencyList_v2 const * Configuration::frequencies () const {return &m_->frequencies_;}
QStringListModel * Configuration::macros () {return &m_->macros_;}
QStringListModel const * Configuration::macros () const {return &m_->macros_;}
QDir Configuration::save_directory () const {return m_->save_directory_;}
QDir Configuration::azel_directory () const {return m_->azel_directory_;}
QString Configuration::rig_name () const {return m_->rig_params_.rig_name;}
bool Configuration::pwrBandTxMemory () const {return m_->pwrBandTxMemory_;}
bool Configuration::pwrBandTuneMemory () const {return m_->pwrBandTuneMemory_;}
LotWUsers const& Configuration::lotw_users () const {return m_->lotw_users_;}
void Configuration::set_calibration (CalibrationParams params)
{
m_->calibration_ = params;
}
void Configuration::enable_calibration (bool on)
{
auto target_frequency = m_->remove_calibration (m_->cached_rig_state_.frequency ()) - m_->current_offset_;
m_->frequency_calibration_disabled_ = !on;
transceiver_frequency (target_frequency);
}
bool Configuration::is_transceiver_online () const
{
return m_->rig_active_;
}
bool Configuration::is_dummy_rig () const
{
return m_->rig_is_dummy_;
}
bool Configuration::transceiver_online ()
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_online: " << m_->cached_rig_state_;
#endif
return m_->have_rig ();
}
int Configuration::transceiver_resolution () const
{
return m_->rig_resolution_;
}
void Configuration::transceiver_offline ()
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_offline:" << m_->cached_rig_state_;
#endif
m_->close_rig ();
}
void Configuration::transceiver_frequency (Frequency f)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_frequency:" << f << m_->cached_rig_state_;
#endif
m_->transceiver_frequency (f);
}
void Configuration::transceiver_tx_frequency (Frequency f)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_tx_frequency:" << f << m_->cached_rig_state_;
#endif
m_->transceiver_tx_frequency (f);
}
void Configuration::transceiver_mode (MODE mode)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_mode:" << mode << m_->cached_rig_state_;
#endif
m_->transceiver_mode (mode);
}
void Configuration::transceiver_ptt (bool on)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_ptt:" << on << m_->cached_rig_state_;
#endif
m_->transceiver_ptt (on);
}
void Configuration::sync_transceiver (bool force_signal, bool enforce_mode_and_split)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::sync_transceiver: force signal:" << force_signal << "enforce_mode_and_split:" << enforce_mode_and_split << m_->cached_rig_state_;
#endif
m_->sync_transceiver (force_signal);
if (!enforce_mode_and_split)
{
m_->transceiver_tx_frequency (0);
}
}
bool Configuration::valid_n1mm_info () const
{
// do very rudimentary checking on the n1mm server name and port number.
//
auto server_name = m_->n1mm_server_name_;
auto port_number = m_->n1mm_server_port_;
return(!(server_name.trimmed().isEmpty() || port_number == 0));
}
QString Configuration::my_grid() const
{
auto the_grid = m_->my_grid_;
if (m_->use_dynamic_grid_ && m_->dynamic_grid_.size () >= 4) {
the_grid = m_->dynamic_grid_;
}
return the_grid;
}
QString Configuration::FieldDayExchange() const
{
return m_->FD_exchange_;
}
void Configuration::setEU_VHF_Contest()
{
m_->bEU_VHF_Contest_ = true;
m_->ui_->rbEU_VHF_Contest->setChecked(m_->bEU_VHF_Contest_);
m_->ui_->cbGenerate77->setChecked(true);
m_->write_settings();
}
QString Configuration::RTTYExchange() const
{
return m_->RTTY_exchange_;
}
void Configuration::set_location (QString const& grid_descriptor)
{
// change the dynamic grid
qDebug () << "Configuration::set_location - location:" << grid_descriptor;
m_->dynamic_grid_ = grid_descriptor.trimmed ();
}
namespace
{
#if defined (Q_OS_MAC)
char const * app_root = "/../../../";
#else
char const * app_root = "/../";
#endif
QString doc_path ()
{
#if CMAKE_BUILD
if (QDir::isRelativePath (CMAKE_INSTALL_DOCDIR))
{
return QApplication::applicationDirPath () + app_root + CMAKE_INSTALL_DOCDIR;
}
return CMAKE_INSTALL_DOCDIR;
#else
return QApplication::applicationDirPath ();
#endif
}
QString data_path ()
{
#if CMAKE_BUILD
if (QDir::isRelativePath (CMAKE_INSTALL_DATADIR))
{
return QApplication::applicationDirPath () + app_root + CMAKE_INSTALL_DATADIR + QChar {'/'} + CMAKE_PROJECT_NAME;
}
return CMAKE_INSTALL_DATADIR;
#else
return QApplication::applicationDirPath ();
#endif
}
}
Configuration::impl::impl (Configuration * self, QNetworkAccessManager * network_manager
, QDir const& temp_directory, QSettings * settings, QWidget * parent)
: QDialog {parent}
, self_ {self}
, transceiver_thread_ {nullptr}
, ui_ {new Ui::configuration_dialog}
, network_manager_ {network_manager}
, settings_ {settings}
, doc_dir_ {doc_path ()}
, data_dir_ {data_path ()}
, temp_dir_ {temp_directory}
, writeable_data_dir_ {QStandardPaths::writableLocation (QStandardPaths::DataLocation)}
, lotw_users_ {network_manager_}
, restart_sound_input_device_ {false}
, restart_sound_output_device_ {false}
, frequencies_ {&bands_}
, next_frequencies_ {&bands_}
, stations_ {&bands_}
, next_stations_ {&bands_}
, current_offset_ {0}
, current_tx_offset_ {0}
, frequency_dialog_ {new FrequencyDialog {&regions_, &modes_, this}}
, station_dialog_ {new StationDialog {&next_stations_, &bands_, this}}
, last_port_type_ {TransceiverFactory::Capabilities::none}
, rig_is_dummy_ {false}
, rig_active_ {false}
, have_rig_ {false}
, rig_changed_ {false}
, rig_resolution_ {0}
, frequency_calibration_disabled_ {false}
, transceiver_command_number_ {0}
, degrade_ {0.} // initialize to zero each run, not
// saved in settings
, default_audio_input_device_selected_ {false}
, default_audio_output_device_selected_ {false}
{
ui_->setupUi (this);
// ui_->groupBox_6->setVisible(false); //### Temporary ??? ###
{
// Find a suitable data file location
if (!writeable_data_dir_.mkpath ("."))
{
MessageBox::critical_message (this, tr ("Failed to create data directory"),
tr ("path: \"%1\"").arg (writeable_data_dir_.absolutePath ()));
throw std::runtime_error {"Failed to create data directory"};
}
// Make sure the default save directory exists
QString save_dir {"save"};
default_save_directory_ = writeable_data_dir_;
default_azel_directory_ = writeable_data_dir_;
if (!default_save_directory_.mkpath (save_dir) || !default_save_directory_.cd (save_dir))
{
MessageBox::critical_message (this, tr ("Failed to create save directory"),
tr ("path: \"%1\%")
.arg (default_save_directory_.absoluteFilePath (save_dir)));
throw std::runtime_error {"Failed to create save directory"};
}
// we now have a deafult save path that exists
// make sure samples directory exists
QString samples_dir {"samples"};
if (!default_save_directory_.mkpath (samples_dir))
{
MessageBox::critical_message (this, tr ("Failed to create samples directory"),
tr ("path: \"%1\"")
.arg (default_save_directory_.absoluteFilePath (samples_dir)));
throw std::runtime_error {"Failed to create samples directory"};
}
// copy in any new sample files to the sample directory
QDir dest_dir {default_save_directory_};
dest_dir.cd (samples_dir);
QDir source_dir {":/" + samples_dir};
source_dir.cd (save_dir);
source_dir.cd (samples_dir);
auto list = source_dir.entryInfoList (QStringList {{"*.wav"}}, QDir::Files | QDir::Readable);
Q_FOREACH (auto const& item, list)
{
if (!dest_dir.exists (item.fileName ()))
{
QFile file {item.absoluteFilePath ()};
file.copy (dest_dir.absoluteFilePath (item.fileName ()));
}
}
}
// this must be done after the default paths above are set
read_settings ();
// load LotW users data
lotw_users_.load (writeable_data_dir_.absoluteFilePath ("lotw-user-activity.csv"));
//
// validation
//
ui_->callsign_line_edit->setValidator (new CallsignValidator {this});
ui_->grid_line_edit->setValidator (new MaidenheadLocatorValidator {this});
ui_->add_macro_line_edit->setValidator (new QRegExpValidator {message_alphabet, this});
ui_->udp_server_port_spin_box->setMinimum (1);
ui_->udp_server_port_spin_box->setMaximum (std::numeric_limits<port_type>::max ());
ui_->n1mm_server_port_spin_box->setMinimum (1);
ui_->n1mm_server_port_spin_box->setMaximum (std::numeric_limits<port_type>::max ());
//
// assign ids to radio buttons
//
ui_->CAT_data_bits_button_group->setId (ui_->CAT_default_bit_radio_button, TransceiverFactory::default_data_bits);
ui_->CAT_data_bits_button_group->setId (ui_->CAT_7_bit_radio_button, TransceiverFactory::seven_data_bits);
ui_->CAT_data_bits_button_group->setId (ui_->CAT_8_bit_radio_button, TransceiverFactory::eight_data_bits);
ui_->CAT_stop_bits_button_group->setId (ui_->CAT_default_stop_bit_radio_button, TransceiverFactory::default_stop_bits);
ui_->CAT_stop_bits_button_group->setId (ui_->CAT_one_stop_bit_radio_button, TransceiverFactory::one_stop_bit);
ui_->CAT_stop_bits_button_group->setId (ui_->CAT_two_stop_bit_radio_button, TransceiverFactory::two_stop_bits);
ui_->CAT_handshake_button_group->setId (ui_->CAT_handshake_default_radio_button, TransceiverFactory::handshake_default);
ui_->CAT_handshake_button_group->setId (ui_->CAT_handshake_none_radio_button, TransceiverFactory::handshake_none);
ui_->CAT_handshake_button_group->setId (ui_->CAT_handshake_xon_radio_button, TransceiverFactory::handshake_XonXoff);
ui_->CAT_handshake_button_group->setId (ui_->CAT_handshake_hardware_radio_button, TransceiverFactory::handshake_hardware);
ui_->PTT_method_button_group->setId (ui_->PTT_VOX_radio_button, TransceiverFactory::PTT_method_VOX);
ui_->PTT_method_button_group->setId (ui_->PTT_CAT_radio_button, TransceiverFactory::PTT_method_CAT);
ui_->PTT_method_button_group->setId (ui_->PTT_DTR_radio_button, TransceiverFactory::PTT_method_DTR);
ui_->PTT_method_button_group->setId (ui_->PTT_RTS_radio_button, TransceiverFactory::PTT_method_RTS);
ui_->TX_audio_source_button_group->setId (ui_->TX_source_mic_radio_button, TransceiverFactory::TX_audio_source_front);
ui_->TX_audio_source_button_group->setId (ui_->TX_source_data_radio_button, TransceiverFactory::TX_audio_source_rear);
ui_->TX_mode_button_group->setId (ui_->mode_none_radio_button, data_mode_none);
ui_->TX_mode_button_group->setId (ui_->mode_USB_radio_button, data_mode_USB);
ui_->TX_mode_button_group->setId (ui_->mode_data_radio_button, data_mode_data);
ui_->split_mode_button_group->setId (ui_->split_none_radio_button, TransceiverFactory::split_mode_none);
ui_->split_mode_button_group->setId (ui_->split_rig_radio_button, TransceiverFactory::split_mode_rig);
ui_->split_mode_button_group->setId (ui_->split_emulate_radio_button, TransceiverFactory::split_mode_emulate);
//
// setup PTT port combo box drop down content
//
fill_port_combo_box (ui_->PTT_port_combo_box);
ui_->PTT_port_combo_box->addItem ("CAT");
//
// setup hooks to keep audio channels aligned with devices
//
{
using namespace std;
using namespace std::placeholders;
function<void (int)> cb (bind (&Configuration::impl::update_audio_channels, this, ui_->sound_input_combo_box, _1, ui_->sound_input_channel_combo_box, false));
connect (ui_->sound_input_combo_box, static_cast<void (QComboBox::*)(int)> (&QComboBox::currentIndexChanged), cb);
cb = bind (&Configuration::impl::update_audio_channels, this, ui_->sound_output_combo_box, _1, ui_->sound_output_channel_combo_box, true);
connect (ui_->sound_output_combo_box, static_cast<void (QComboBox::*)(int)> (&QComboBox::currentIndexChanged), cb);
}
//
// setup macros list view
//
ui_->macros_list_view->setModel (&next_macros_);
ui_->macros_list_view->setItemDelegate (new MessageItemDelegate {this});
macro_delete_action_ = new QAction {tr ("&Delete"), ui_->macros_list_view};
ui_->macros_list_view->insertAction (nullptr, macro_delete_action_);
connect (macro_delete_action_, &QAction::triggered, this, &Configuration::impl::delete_macro);
// setup IARU region combo box model
ui_->region_combo_box->setModel (&regions_);
//
// setup working frequencies table model & view
//
frequencies_.sort (FrequencyList_v2::frequency_column);
ui_->frequencies_table_view->setModel (&next_frequencies_);
ui_->frequencies_table_view->sortByColumn (FrequencyList_v2::frequency_column, Qt::AscendingOrder);
ui_->frequencies_table_view->setColumnHidden (FrequencyList_v2::frequency_mhz_column, true);
// delegates
auto frequencies_item_delegate = new QStyledItemDelegate {this};
frequencies_item_delegate->setItemEditorFactory (item_editor_factory ());
ui_->frequencies_table_view->setItemDelegate (frequencies_item_delegate);
ui_->frequencies_table_view->setItemDelegateForColumn (FrequencyList_v2::region_column, new ForeignKeyDelegate {&regions_, 0, this});
ui_->frequencies_table_view->setItemDelegateForColumn (FrequencyList_v2::mode_column, new ForeignKeyDelegate {&modes_, 0, this});
// actions
frequency_delete_action_ = new QAction {tr ("&Delete"), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, frequency_delete_action_);
connect (frequency_delete_action_, &QAction::triggered, this, &Configuration::impl::delete_frequencies);
frequency_insert_action_ = new QAction {tr ("&Insert ..."), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, frequency_insert_action_);
connect (frequency_insert_action_, &QAction::triggered, this, &Configuration::impl::insert_frequency);
load_frequencies_action_ = new QAction {tr ("&Load ..."), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, load_frequencies_action_);
connect (load_frequencies_action_, &QAction::triggered, this, &Configuration::impl::load_frequencies);
save_frequencies_action_ = new QAction {tr ("&Save as ..."), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, save_frequencies_action_);
connect (save_frequencies_action_, &QAction::triggered, this, &Configuration::impl::save_frequencies);
merge_frequencies_action_ = new QAction {tr ("&Merge ..."), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, merge_frequencies_action_);
connect (merge_frequencies_action_, &QAction::triggered, this, &Configuration::impl::merge_frequencies);
reset_frequencies_action_ = new QAction {tr ("&Reset"), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, reset_frequencies_action_);
connect (reset_frequencies_action_, &QAction::triggered, this, &Configuration::impl::reset_frequencies);
//
// setup stations table model & view
//
stations_.sort (StationList::band_column);
ui_->stations_table_view->setModel (&next_stations_);
ui_->stations_table_view->sortByColumn (StationList::band_column, Qt::AscendingOrder);
// delegates
auto stations_item_delegate = new QStyledItemDelegate {this};
stations_item_delegate->setItemEditorFactory (item_editor_factory ());
ui_->stations_table_view->setItemDelegate (stations_item_delegate);
ui_->stations_table_view->setItemDelegateForColumn (StationList::band_column, new ForeignKeyDelegate {&bands_, &next_stations_, 0, StationList::band_column, this});
// actions
station_delete_action_ = new QAction {tr ("&Delete"), ui_->stations_table_view};
ui_->stations_table_view->insertAction (nullptr, station_delete_action_);
connect (station_delete_action_, &QAction::triggered, this, &Configuration::impl::delete_stations);
station_insert_action_ = new QAction {tr ("&Insert ..."), ui_->stations_table_view};
ui_->stations_table_view->insertAction (nullptr, station_insert_action_);
connect (station_insert_action_, &QAction::triggered, this, &Configuration::impl::insert_station);
//
// load combo boxes with audio setup choices
//
default_audio_input_device_selected_ = load_audio_devices (QAudio::AudioInput, ui_->sound_input_combo_box, &audio_input_device_);
default_audio_output_device_selected_ = load_audio_devices (QAudio::AudioOutput, ui_->sound_output_combo_box, &audio_output_device_);
update_audio_channels (ui_->sound_input_combo_box, ui_->sound_input_combo_box->currentIndex (), ui_->sound_input_channel_combo_box, false);
update_audio_channels (ui_->sound_output_combo_box, ui_->sound_output_combo_box->currentIndex (), ui_->sound_output_channel_combo_box, true);
ui_->sound_input_channel_combo_box->setCurrentIndex (audio_input_channel_);
ui_->sound_output_channel_combo_box->setCurrentIndex (audio_output_channel_);
enumerate_rigs ();
initialize_models ();
transceiver_thread_ = new QThread {this};
transceiver_thread_->start ();
}
Configuration::impl::~impl ()
{
transceiver_thread_->quit ();
transceiver_thread_->wait ();
write_settings ();
}
void Configuration::impl::initialize_models ()
{
auto pal = ui_->callsign_line_edit->palette ();
if (my_callsign_.isEmpty ())
{
pal.setColor (QPalette::Base, "#ffccff");
}
else
{
pal.setColor (QPalette::Base, Qt::white);
}
ui_->callsign_line_edit->setPalette (pal);
ui_->grid_line_edit->setPalette (pal);
ui_->callsign_line_edit->setText (my_callsign_);
ui_->grid_line_edit->setText (my_grid_);
ui_->use_dynamic_grid->setChecked(use_dynamic_grid_);
ui_->labCQ->setStyleSheet(QString("background: %1").arg(color_CQ_.name()));
ui_->labMyCall->setStyleSheet(QString("background: %1").arg(color_MyCall_.name()));
ui_->labTx->setStyleSheet(QString("background: %1").arg(color_TxMsg_.name()));
ui_->labDXCC->setStyleSheet(QString("background: %1").arg(color_DXCC_.name()));
ui_->labDXCCband->setStyleSheet(QString("background: %1").arg(color_DXCCband_.name()));
ui_->labNewCall->setStyleSheet(QString("background: %1").arg(color_NewCall_.name()));
ui_->labNewCallBand->setStyleSheet(QString("background: %1").arg(color_NewCallBand_.name()));
ui_->labNewGrid->setStyleSheet(QString("background: %1").arg(color_NewGrid_.name()));
ui_->labNewGridBand->setStyleSheet(QString("background: %1").arg(color_NewGridBand_.name()));
ui_->labLoTW->setStyleSheet(QString("color: %1").arg(color_LoTW_.name()));
ui_->CW_id_interval_spin_box->setValue (id_interval_);
ui_->sbNtrials->setValue (ntrials_);
ui_->sbTxDelay->setValue (txDelay_);
ui_->sbAggressive->setValue (aggressive_);
ui_->sbDegrade->setValue (degrade_);
ui_->sbBandwidth->setValue (RxBandwidth_);
ui_->PTT_method_button_group->button (rig_params_.ptt_type)->setChecked (true);
ui_->save_path_display_label->setText (save_directory_.absolutePath ());
ui_->azel_path_display_label->setText (azel_directory_.absolutePath ());
ui_->CW_id_after_73_check_box->setChecked (id_after_73_);
ui_->tx_QSY_check_box->setChecked (tx_QSY_allowed_);
ui_->psk_reporter_check_box->setChecked (spot_to_psk_reporter_);
ui_->monitor_off_check_box->setChecked (monitor_off_at_startup_);
ui_->monitor_last_used_check_box->setChecked (monitor_last_used_);
ui_->log_as_RTTY_check_box->setChecked (log_as_RTTY_);
ui_->report_in_comments_check_box->setChecked (report_in_comments_);
ui_->prompt_to_log_check_box->setChecked (prompt_to_log_);
ui_->insert_blank_check_box->setChecked (insert_blank_);
ui_->DXCC_check_box->setChecked (DXCC_);
ui_->ppfx_check_box->setChecked (ppfx_);
ui_->clear_DX_check_box->setChecked (clear_DX_);
ui_->miles_check_box->setChecked (miles_);
ui_->quick_call_check_box->setChecked (quick_call_);
ui_->disable_TX_on_73_check_box->setChecked (disable_TX_on_73_);
ui_->tx_watchdog_spin_box->setValue (watchdog_);
ui_->TX_messages_check_box->setChecked (TX_messages_);
ui_->enable_VHF_features_check_box->setChecked(enable_VHF_features_);
ui_->decode_at_52s_check_box->setChecked(decode_at_52s_);
ui_->single_decode_check_box->setChecked(single_decode_);
ui_->cbTwoPass->setChecked(twoPass_);
ui_->cbFox->setChecked(bFox_);
ui_->cbHound->setChecked(bHound_);
ui_->cbGenerate77->setChecked(bGenerate77_);
ui_->cbDecode77->setChecked(bDecode77_);
ui_->rbNone->setChecked(bNoSpecial_);
ui_->rbFieldDay->setChecked(bFieldDay_);
ui_->rbRTTYroundup->setChecked(bRTTYroundup_);
ui_->rbNA_VHF_Contest->setChecked(bNA_VHF_Contest_);
ui_->rbEU_VHF_Contest->setChecked(bEU_VHF_Contest_);
ui_->cbx2ToneSpacing->setChecked(x2ToneSpacing_);
ui_->cbx4ToneSpacing->setChecked(x4ToneSpacing_);
ui_->type_2_msg_gen_combo_box->setCurrentIndex (type_2_msg_gen_);
ui_->rig_combo_box->setCurrentText (rig_params_.rig_name);
ui_->TX_mode_button_group->button (data_mode_)->setChecked (true);
ui_->split_mode_button_group->button (rig_params_.split_mode)->setChecked (true);
ui_->CAT_serial_baud_combo_box->setCurrentText (QString::number (rig_params_.baud));
ui_->CAT_data_bits_button_group->button (rig_params_.data_bits)->setChecked (true);
ui_->CAT_stop_bits_button_group->button (rig_params_.stop_bits)->setChecked (true);
ui_->CAT_handshake_button_group->button (rig_params_.handshake)->setChecked (true);
ui_->checkBoxPwrBandTxMemory->setChecked(pwrBandTxMemory_);
ui_->checkBoxPwrBandTuneMemory->setChecked(pwrBandTuneMemory_);
if (rig_params_.force_dtr)
{
ui_->force_DTR_combo_box->setCurrentIndex (rig_params_.dtr_high ? 1 : 2);
}
else
{
ui_->force_DTR_combo_box->setCurrentIndex (0);
}
if (rig_params_.force_rts)
{
ui_->force_RTS_combo_box->setCurrentIndex (rig_params_.rts_high ? 1 : 2);
}
else
{
ui_->force_RTS_combo_box->setCurrentIndex (0);
}
ui_->TX_audio_source_button_group->button (rig_params_.audio_source)->setChecked (true);
ui_->CAT_poll_interval_spin_box->setValue (rig_params_.poll_interval);
ui_->opCallEntry->setText (opCall_);
ui_->udp_server_line_edit->setText (udp_server_name_);
ui_->udp_server_port_spin_box->setValue (udp_server_port_);
ui_->accept_udp_requests_check_box->setChecked (accept_udp_requests_);
ui_->n1mm_server_name_line_edit->setText (n1mm_server_name_);
ui_->n1mm_server_port_spin_box->setValue (n1mm_server_port_);
ui_->enable_n1mm_broadcast_check_box->setChecked (broadcast_to_n1mm_);
ui_->udpWindowToFront->setChecked(udpWindowToFront_);
ui_->udpWindowRestore->setChecked(udpWindowRestore_);
ui_->calibration_intercept_spin_box->setValue (calibration_.intercept);
ui_->calibration_slope_ppm_spin_box->setValue (calibration_.slope_ppm);
chk77();
if (rig_params_.ptt_port.isEmpty ())
{
if (ui_->PTT_port_combo_box->count ())
{
ui_->PTT_port_combo_box->setCurrentText (ui_->PTT_port_combo_box->itemText (0));
}
}
else
{
ui_->PTT_port_combo_box->setCurrentText (rig_params_.ptt_port);
}
ui_->region_combo_box->setCurrentIndex (region_);
next_macros_.setStringList (macros_.stringList ());
next_frequencies_.frequency_list (frequencies_.frequency_list ());
next_stations_.station_list (stations_.station_list ());
set_rig_invariants ();
}
void Configuration::impl::done (int r)
{
// do this here since window is still on screen at this point
SettingsGroup g {settings_, "Configuration"};
settings_->setValue ("window/geometry", saveGeometry ());
QDialog::done (r);
}
void Configuration::impl::read_settings ()
{
SettingsGroup g {settings_, "Configuration"};
restoreGeometry (settings_->value ("window/geometry").toByteArray ());
my_callsign_ = settings_->value ("MyCall", QString {}).toString ();
my_grid_ = settings_->value ("MyGrid", QString {}).toString ();
FD_exchange_ = settings_->value ("FieldDayExchange",QString {}).toString ();
RTTY_exchange_ = settings_->value ("RTTYExchange",QString {}).toString ();
ui_->FieldDay_Exchange->setText(FD_exchange_);
ui_->RTTY_Exchange->setText(RTTY_exchange_);
next_color_CQ_ = color_CQ_ = settings_->value("colorCQ","#66ff66").toString();
next_color_MyCall_ = color_MyCall_ = settings_->value("colorMyCall","#ff6666").toString();
next_color_TxMsg_ = color_TxMsg_ = settings_->value("colorTxMsg","#ffff00").toString();
next_color_DXCC_ = color_DXCC_ = settings_->value("colorDXCC","#ff00ff").toString();
next_color_DXCCband_ = color_DXCCband_ = settings_->value("colorDXCCband","#ffaaff").toString();
next_color_NewCall_ = color_NewCall_ = settings_->value("colorNewCall","#66b2ff").toString();
next_color_NewCallBand_ = color_NewCallBand_ = settings_->value("colorNewCallBand","#99ffff").toString();
next_color_NewGrid_ = color_NewGrid_ = settings_->value("colorNewGrid","#ffaa00").toString();
next_color_NewGridBand_ = color_NewGridBand_ = settings_->value("colorNewGridBand","#ffcc99").toString();
next_color_LoTW_ = color_LoTW_ = settings_->value("colorLoTW","#990000").toString();
if (next_font_.fromString (settings_->value ("Font", QGuiApplication::font ().toString ()).toString ())
&& next_font_ != font_)
{
font_ = next_font_;
Q_EMIT self_->text_font_changed (font_);
}
else
{
next_font_ = font_;
}
if (next_decoded_text_font_.fromString (settings_->value ("DecodedTextFont", "Courier, 10").toString ())
&& next_decoded_text_font_ != decoded_text_font_)
{
decoded_text_font_ = next_decoded_text_font_;
Q_EMIT self_->decoded_text_font_changed (decoded_text_font_);
}
else
{
next_decoded_text_font_ = decoded_text_font_;
}
id_interval_ = settings_->value ("IDint", 0).toInt ();
ntrials_ = settings_->value ("nTrials", 6).toInt ();
txDelay_ = settings_->value ("TxDelay",0.2).toDouble();
aggressive_ = settings_->value ("Aggressive", 0).toInt ();
RxBandwidth_ = settings_->value ("RxBandwidth", 2500).toInt ();
save_directory_ = settings_->value ("SaveDir", default_save_directory_.absolutePath ()).toString ();
azel_directory_ = settings_->value ("AzElDir", default_azel_directory_.absolutePath ()).toString ();
{
//
// retrieve audio input device
//
auto saved_name = settings_->value ("SoundInName").toString ();
// deal with special Windows default audio devices
auto default_device = QAudioDeviceInfo::defaultInputDevice ();
if (saved_name == default_device.deviceName ())
{
audio_input_device_ = default_device;
default_audio_input_device_selected_ = true;
}
else
{
default_audio_input_device_selected_ = false;
Q_FOREACH (auto const& p, QAudioDeviceInfo::availableDevices (QAudio::AudioInput)) // available audio input devices
{
if (p.deviceName () == saved_name)
{
audio_input_device_ = p;
}
}
}
}
{
//
// retrieve audio output device
//
auto saved_name = settings_->value("SoundOutName").toString();
// deal with special Windows default audio devices
auto default_device = QAudioDeviceInfo::defaultOutputDevice ();
if (saved_name == default_device.deviceName ())
{
audio_output_device_ = default_device;
default_audio_output_device_selected_ = true;
}
else
{
default_audio_output_device_selected_ = false;
Q_FOREACH (auto const& p, QAudioDeviceInfo::availableDevices (QAudio::AudioOutput)) // available audio output devices
{
if (p.deviceName () == saved_name)
{
audio_output_device_ = p;
}
}
}
}
// retrieve audio channel info
audio_input_channel_ = AudioDevice::fromString (settings_->value ("AudioInputChannel", "Mono").toString ());
audio_output_channel_ = AudioDevice::fromString (settings_->value ("AudioOutputChannel", "Mono").toString ());
type_2_msg_gen_ = settings_->value ("Type2MsgGen", QVariant::fromValue (Configuration::type_2_msg_3_full)).value<Configuration::Type2MsgGen> ();
monitor_off_at_startup_ = settings_->value ("MonitorOFF", false).toBool ();
monitor_last_used_ = settings_->value ("MonitorLastUsed", false).toBool ();
spot_to_psk_reporter_ = settings_->value ("PSKReporter", false).toBool ();
id_after_73_ = settings_->value ("After73", false).toBool ();
tx_QSY_allowed_ = settings_->value ("TxQSYAllowed", false).toBool ();
use_dynamic_grid_ = settings_->value ("AutoGrid", false).toBool ();
macros_.setStringList (settings_->value ("Macros", QStringList {"TNX 73 GL"}).toStringList ());
region_ = settings_->value ("Region", QVariant::fromValue (IARURegions::ALL)).value<IARURegions::Region> ();
if (settings_->contains ("FrequenciesForRegionModes"))
{
auto const& v = settings_->value ("FrequenciesForRegionModes");
if (v.isValid ())
{
frequencies_.frequency_list (v.value<FrequencyList_v2::FrequencyItems> ());
}
else
{
frequencies_.reset_to_defaults ();
}
}
else
{
frequencies_.reset_to_defaults ();
}
stations_.station_list (settings_->value ("stations").value<StationList::Stations> ());
log_as_RTTY_ = settings_->value ("toRTTY", false).toBool ();
report_in_comments_ = settings_->value("dBtoComments", false).toBool ();
rig_params_.rig_name = settings_->value ("Rig", TransceiverFactory::basic_transceiver_name_).toString ();
rig_is_dummy_ = TransceiverFactory::basic_transceiver_name_ == rig_params_.rig_name;
rig_params_.network_port = settings_->value ("CATNetworkPort").toString ();
rig_params_.usb_port = settings_->value ("CATUSBPort").toString ();
rig_params_.serial_port = settings_->value ("CATSerialPort").toString ();
rig_params_.baud = settings_->value ("CATSerialRate", 4800).toInt ();
rig_params_.data_bits = settings_->value ("CATDataBits", QVariant::fromValue (TransceiverFactory::default_data_bits)).value<TransceiverFactory::DataBits> ();
rig_params_.stop_bits = settings_->value ("CATStopBits", QVariant::fromValue (TransceiverFactory::default_stop_bits)).value<TransceiverFactory::StopBits> ();
rig_params_.handshake = settings_->value ("CATHandshake", QVariant::fromValue (TransceiverFactory::handshake_default)).value<TransceiverFactory::Handshake> ();
rig_params_.force_dtr = settings_->value ("CATForceDTR", false).toBool ();
rig_params_.dtr_high = settings_->value ("DTR", false).toBool ();
rig_params_.force_rts = settings_->value ("CATForceRTS", false).toBool ();
rig_params_.rts_high = settings_->value ("RTS", false).toBool ();
rig_params_.ptt_type = settings_->value ("PTTMethod", QVariant::fromValue (TransceiverFactory::PTT_method_VOX)).value<TransceiverFactory::PTTMethod> ();
rig_params_.audio_source = settings_->value ("TXAudioSource", QVariant::fromValue (TransceiverFactory::TX_audio_source_front)).value<TransceiverFactory::TXAudioSource> ();
rig_params_.ptt_port = settings_->value ("PTTport").toString ();
data_mode_ = settings_->value ("DataMode", QVariant::fromValue (data_mode_none)).value<Configuration::DataMode> ();
prompt_to_log_ = settings_->value ("PromptToLog", false).toBool ();
insert_blank_ = settings_->value ("InsertBlank", false).toBool ();
DXCC_ = settings_->value ("DXCCEntity", false).toBool ();
ppfx_ = settings_->value ("PrincipalPrefix", false).toBool ();
clear_DX_ = settings_->value ("ClearCallGrid", false).toBool ();
miles_ = settings_->value ("Miles", false).toBool ();
quick_call_ = settings_->value ("QuickCall", false).toBool ();
disable_TX_on_73_ = settings_->value ("73TxDisable", false).toBool ();
watchdog_ = settings_->value ("TxWatchdog", 6).toInt ();
TX_messages_ = settings_->value ("Tx2QSO", true).toBool ();
enable_VHF_features_ = settings_->value("VHFUHF",false).toBool ();
decode_at_52s_ = settings_->value("Decode52",false).toBool ();
single_decode_ = settings_->value("SingleDecode",false).toBool ();
twoPass_ = settings_->value("TwoPass",true).toBool ();
bFox_ = settings_->value("Fox",false).toBool ();
bHound_ = settings_->value("Hound",false).toBool ();
bGenerate77_ = settings_->value("Generate77",false).toBool ();
bDecode77_ = settings_->value("Decode77",false).toBool ();
bNoSpecial_ = settings_->value("NoSpecial",false).toBool ();
bFieldDay_ = settings_->value("FieldDay",false).toBool ();
bRTTYroundup_ = settings_->value("RTTYroundup",false).toBool ();
bNA_VHF_Contest_ = settings_->value("NA_VHF_Contest",false).toBool ();
bEU_VHF_Contest_ = settings_->value("EU_VHF_Contest",false).toBool ();
x2ToneSpacing_ = settings_->value("x2ToneSpacing",false).toBool ();
x4ToneSpacing_ = settings_->value("x4ToneSpacing",false).toBool ();
rig_params_.poll_interval = settings_->value ("Polling", 0).toInt ();
rig_params_.split_mode = settings_->value ("SplitMode", QVariant::fromValue (TransceiverFactory::split_mode_none)).value<TransceiverFactory::SplitMode> ();
opCall_ = settings_->value ("OpCall", "").toString ();
udp_server_name_ = settings_->value ("UDPServer", "127.0.0.1").toString ();
udp_server_port_ = settings_->value ("UDPServerPort", 2237).toUInt ();
n1mm_server_name_ = settings_->value ("N1MMServer", "127.0.0.1").toString ();
n1mm_server_port_ = settings_->value ("N1MMServerPort", 2333).toUInt ();
broadcast_to_n1mm_ = settings_->value ("BroadcastToN1MM", false).toBool ();
accept_udp_requests_ = settings_->value ("AcceptUDPRequests", false).toBool ();
udpWindowToFront_ = settings_->value ("udpWindowToFront",false).toBool ();
udpWindowRestore_ = settings_->value ("udpWindowRestore",false).toBool ();
calibration_.intercept = settings_->value ("CalibrationIntercept", 0.).toDouble ();
calibration_.slope_ppm = settings_->value ("CalibrationSlopePPM", 0.).toDouble ();
pwrBandTxMemory_ = settings_->value("pwrBandTxMemory",false).toBool ();
pwrBandTuneMemory_ = settings_->value("pwrBandTuneMemory",false).toBool ();
}
void Configuration::impl::write_settings ()
{
SettingsGroup g {settings_, "Configuration"};
settings_->setValue ("MyCall", my_callsign_);
settings_->setValue ("MyGrid", my_grid_);
settings_->setValue ("FieldDayExchange", FD_exchange_);
settings_->setValue ("RTTYExchange", RTTY_exchange_);
settings_->setValue("colorCQ",color_CQ_);
settings_->setValue("colorMyCall",color_MyCall_);
settings_->setValue("colorTxMsg",color_TxMsg_);
settings_->setValue("colorDXCC",color_DXCC_);
settings_->setValue("colorDXCCband",color_DXCCband_);
settings_->setValue("colorNewCall",color_NewCall_);
settings_->setValue("colorNewCallBand",color_NewCallBand_);
settings_->setValue("colorNewGrid",color_NewGrid_);
settings_->setValue("colorNewGridBand",color_NewGridBand_);
settings_->setValue("colorLoTW",color_LoTW_);
settings_->setValue ("Font", font_.toString ());
settings_->setValue ("DecodedTextFont", decoded_text_font_.toString ());
settings_->setValue ("IDint", id_interval_);
settings_->setValue ("nTrials", ntrials_);
settings_->setValue ("TxDelay", txDelay_);
settings_->setValue ("Aggressive", aggressive_);
settings_->setValue ("RxBandwidth", RxBandwidth_);
settings_->setValue ("PTTMethod", QVariant::fromValue (rig_params_.ptt_type));
settings_->setValue ("PTTport", rig_params_.ptt_port);
settings_->setValue ("SaveDir", save_directory_.absolutePath ());
settings_->setValue ("AzElDir", azel_directory_.absolutePath ());
if (default_audio_input_device_selected_)
{
settings_->setValue ("SoundInName", QAudioDeviceInfo::defaultInputDevice ().deviceName ());
}
else
{
settings_->setValue ("SoundInName", audio_input_device_.deviceName ());
}
if (default_audio_output_device_selected_)
{
settings_->setValue ("SoundOutName", QAudioDeviceInfo::defaultOutputDevice ().deviceName ());
}
else
{
settings_->setValue ("SoundOutName", audio_output_device_.deviceName ());
}
settings_->setValue ("AudioInputChannel", AudioDevice::toString (audio_input_channel_));
settings_->setValue ("AudioOutputChannel", AudioDevice::toString (audio_output_channel_));
settings_->setValue ("Type2MsgGen", QVariant::fromValue (type_2_msg_gen_));
settings_->setValue ("MonitorOFF", monitor_off_at_startup_);
settings_->setValue ("MonitorLastUsed", monitor_last_used_);
settings_->setValue ("PSKReporter", spot_to_psk_reporter_);
settings_->setValue ("After73", id_after_73_);
settings_->setValue ("TxQSYAllowed", tx_QSY_allowed_);
settings_->setValue ("Macros", macros_.stringList ());
settings_->setValue ("FrequenciesForRegionModes", QVariant::fromValue (frequencies_.frequency_list ()));
settings_->setValue ("stations", QVariant::fromValue (stations_.station_list ()));
settings_->setValue ("toRTTY", log_as_RTTY_);
settings_->setValue ("dBtoComments", report_in_comments_);
settings_->setValue ("Rig", rig_params_.rig_name);
settings_->setValue ("CATNetworkPort", rig_params_.network_port);
settings_->setValue ("CATUSBPort", rig_params_.usb_port);
settings_->setValue ("CATSerialPort", rig_params_.serial_port);
settings_->setValue ("CATSerialRate", rig_params_.baud);
settings_->setValue ("CATDataBits", QVariant::fromValue (rig_params_.data_bits));
settings_->setValue ("CATStopBits", QVariant::fromValue (rig_params_.stop_bits));
settings_->setValue ("CATHandshake", QVariant::fromValue (rig_params_.handshake));
settings_->setValue ("DataMode", QVariant::fromValue (data_mode_));
settings_->setValue ("PromptToLog", prompt_to_log_);
settings_->setValue ("InsertBlank", insert_blank_);
settings_->setValue ("DXCCEntity", DXCC_);
settings_->setValue ("PrincipalPrefix", ppfx_);
settings_->setValue ("ClearCallGrid", clear_DX_);
settings_->setValue ("Miles", miles_);
settings_->setValue ("QuickCall", quick_call_);
settings_->setValue ("73TxDisable", disable_TX_on_73_);
settings_->setValue ("TxWatchdog", watchdog_);
settings_->setValue ("Tx2QSO", TX_messages_);
settings_->setValue ("CATForceDTR", rig_params_.force_dtr);
settings_->setValue ("DTR", rig_params_.dtr_high);
settings_->setValue ("CATForceRTS", rig_params_.force_rts);
settings_->setValue ("RTS", rig_params_.rts_high);
settings_->setValue ("TXAudioSource", QVariant::fromValue (rig_params_.audio_source));
settings_->setValue ("Polling", rig_params_.poll_interval);
settings_->setValue ("SplitMode", QVariant::fromValue (rig_params_.split_mode));
settings_->setValue ("VHFUHF", enable_VHF_features_);
settings_->setValue ("Decode52", decode_at_52s_);
settings_->setValue ("SingleDecode", single_decode_);
settings_->setValue ("TwoPass", twoPass_);
settings_->setValue ("Fox", bFox_);
settings_->setValue ("Hound", bHound_);
settings_->setValue ("Generate77", bGenerate77_);
settings_->setValue ("Decode77", bDecode77_);
settings_->setValue ("NoSpecial", bNoSpecial_);
settings_->setValue ("FieldDay", bFieldDay_);
settings_->setValue ("RTTYroundup", bRTTYroundup_);
settings_->setValue ("NA_VHF_Contest", bNA_VHF_Contest_);
settings_->setValue ("EU_VHF_Contest", bEU_VHF_Contest_);
settings_->setValue ("x2ToneSpacing", x2ToneSpacing_);
settings_->setValue ("x4ToneSpacing", x4ToneSpacing_);
settings_->setValue ("OpCall", opCall_);
settings_->setValue ("UDPServer", udp_server_name_);
settings_->setValue ("UDPServerPort", udp_server_port_);
settings_->setValue ("N1MMServer", n1mm_server_name_);
settings_->setValue ("N1MMServerPort", n1mm_server_port_);
settings_->setValue ("BroadcastToN1MM", broadcast_to_n1mm_);
settings_->setValue ("AcceptUDPRequests", accept_udp_requests_);
settings_->setValue ("udpWindowToFront", udpWindowToFront_);
settings_->setValue ("udpWindowRestore", udpWindowRestore_);
settings_->setValue ("CalibrationIntercept", calibration_.intercept);
settings_->setValue ("CalibrationSlopePPM", calibration_.slope_ppm);
settings_->setValue ("pwrBandTxMemory", pwrBandTxMemory_);
settings_->setValue ("pwrBandTuneMemory", pwrBandTuneMemory_);
settings_->setValue ("Region", QVariant::fromValue (region_));
settings_->setValue ("AutoGrid", use_dynamic_grid_);
}
void Configuration::impl::set_rig_invariants ()
{
auto const& rig = ui_->rig_combo_box->currentText ();
auto const& ptt_port = ui_->PTT_port_combo_box->currentText ();
auto ptt_method = static_cast<TransceiverFactory::PTTMethod> (ui_->PTT_method_button_group->checkedId ());
auto CAT_PTT_enabled = transceiver_factory_.has_CAT_PTT (rig);
auto CAT_indirect_serial_PTT = transceiver_factory_.has_CAT_indirect_serial_PTT (rig);
auto asynchronous_CAT = transceiver_factory_.has_asynchronous_CAT (rig);
auto is_hw_handshake = ui_->CAT_handshake_group_box->isEnabled ()
&& TransceiverFactory::handshake_hardware == static_cast<TransceiverFactory::Handshake> (ui_->CAT_handshake_button_group->checkedId ());
ui_->test_CAT_push_button->setStyleSheet ({});
ui_->CAT_poll_interval_label->setEnabled (!asynchronous_CAT);
ui_->CAT_poll_interval_spin_box->setEnabled (!asynchronous_CAT);
auto port_type = transceiver_factory_.CAT_port_type (rig);
bool is_serial_CAT (TransceiverFactory::Capabilities::serial == port_type);
auto const& cat_port = ui_->CAT_port_combo_box->currentText ();
// only enable CAT option if transceiver has CAT PTT
ui_->PTT_CAT_radio_button->setEnabled (CAT_PTT_enabled);
auto enable_ptt_port = TransceiverFactory::PTT_method_CAT != ptt_method && TransceiverFactory::PTT_method_VOX != ptt_method;
ui_->PTT_port_combo_box->setEnabled (enable_ptt_port);
ui_->PTT_port_label->setEnabled (enable_ptt_port);
if (CAT_indirect_serial_PTT)
{
ui_->PTT_port_combo_box->setItemData (ui_->PTT_port_combo_box->findText ("CAT")
, combo_box_item_enabled, Qt::UserRole - 1);
}
else
{
ui_->PTT_port_combo_box->setItemData (ui_->PTT_port_combo_box->findText ("CAT")
, combo_box_item_disabled, Qt::UserRole - 1);
if ("CAT" == ui_->PTT_port_combo_box->currentText () && ui_->PTT_port_combo_box->currentIndex () > 0)
{
ui_->PTT_port_combo_box->setCurrentIndex (ui_->PTT_port_combo_box->currentIndex () - 1);
}
}
ui_->PTT_RTS_radio_button->setEnabled (!(is_serial_CAT && ptt_port == cat_port && is_hw_handshake));
if (TransceiverFactory::basic_transceiver_name_ == rig)
{
// makes no sense with rig as "None"
ui_->monitor_last_used_check_box->setEnabled (false);
ui_->CAT_control_group_box->setEnabled (false);
ui_->test_CAT_push_button->setEnabled (false);
ui_->test_PTT_push_button->setEnabled (TransceiverFactory::PTT_method_DTR == ptt_method
|| TransceiverFactory::PTT_method_RTS == ptt_method);
ui_->TX_audio_source_group_box->setEnabled (false);
}
else
{
ui_->monitor_last_used_check_box->setEnabled (true);
ui_->CAT_control_group_box->setEnabled (true);
ui_->test_CAT_push_button->setEnabled (true);
ui_->test_PTT_push_button->setEnabled (false);
ui_->TX_audio_source_group_box->setEnabled (transceiver_factory_.has_CAT_PTT_mic_data (rig) && TransceiverFactory::PTT_method_CAT == ptt_method);
if (port_type != last_port_type_)
{
last_port_type_ = port_type;
switch (port_type)
{
case TransceiverFactory::Capabilities::serial:
fill_port_combo_box (ui_->CAT_port_combo_box);
ui_->CAT_port_combo_box->setCurrentText (rig_params_.serial_port);
if (ui_->CAT_port_combo_box->currentText ().isEmpty () && ui_->CAT_port_combo_box->count ())
{
ui_->CAT_port_combo_box->setCurrentText (ui_->CAT_port_combo_box->itemText (0));
}
ui_->CAT_port_label->setText (tr ("Serial Port:"));
ui_->CAT_port_combo_box->setToolTip (tr ("Serial port used for CAT control"));
ui_->CAT_port_combo_box->setEnabled (true);
break;
case TransceiverFactory::Capabilities::network:
ui_->CAT_port_combo_box->clear ();
ui_->CAT_port_combo_box->setCurrentText (rig_params_.network_port);
ui_->CAT_port_label->setText (tr ("Network Server:"));
ui_->CAT_port_combo_box->setToolTip (tr ("Optional hostname and port of network service.\n"
"Leave blank for a sensible default on this machine.\n"
"Formats:\n"
"\thostname:port\n"
"\tIPv4-address:port\n"
"\t[IPv6-address]:port"));
ui_->CAT_port_combo_box->setEnabled (true);
break;
case TransceiverFactory::Capabilities::usb:
ui_->CAT_port_combo_box->clear ();
ui_->CAT_port_combo_box->setCurrentText (rig_params_.usb_port);
ui_->CAT_port_label->setText (tr ("USB Device:"));
ui_->CAT_port_combo_box->setToolTip (tr ("Optional device identification.\n"
"Leave blank for a sensible default for the rig.\n"
"Format:\n"
"\t[VID[:PID[:VENDOR[:PRODUCT]]]]"));
ui_->CAT_port_combo_box->setEnabled (true);
break;
default:
ui_->CAT_port_combo_box->clear ();
ui_->CAT_port_combo_box->setEnabled (false);
break;
}
}
ui_->CAT_serial_port_parameters_group_box->setEnabled (is_serial_CAT);
ui_->force_DTR_combo_box->setEnabled (is_serial_CAT
&& (cat_port != ptt_port
|| !ui_->PTT_DTR_radio_button->isEnabled ()
|| !ui_->PTT_DTR_radio_button->isChecked ()));
ui_->force_RTS_combo_box->setEnabled (is_serial_CAT
&& !is_hw_handshake
&& (cat_port != ptt_port
|| !ui_->PTT_RTS_radio_button->isEnabled ()
|| !ui_->PTT_RTS_radio_button->isChecked ()));
}
ui_->mode_group_box->setEnabled (WSJT_RIG_NONE_CAN_SPLIT
|| TransceiverFactory::basic_transceiver_name_ != rig);
ui_->split_operation_group_box->setEnabled (WSJT_RIG_NONE_CAN_SPLIT
|| TransceiverFactory::basic_transceiver_name_ != rig);
}
bool Configuration::impl::validate ()
{
if (ui_->sound_input_combo_box->currentIndex () < 0
&& !QAudioDeviceInfo::availableDevices (QAudio::AudioInput).empty ())
{
MessageBox::critical_message (this, tr ("Invalid audio input device"));
return false;
}
if (ui_->sound_output_combo_box->currentIndex () < 0
&& !QAudioDeviceInfo::availableDevices (QAudio::AudioOutput).empty ())
{
MessageBox::critical_message (this, tr ("Invalid audio out device"));
return false;
}
if (!ui_->PTT_method_button_group->checkedButton ()->isEnabled ())
{
MessageBox::critical_message (this, tr ("Invalid PTT method"));
return false;
}
auto ptt_method = static_cast<TransceiverFactory::PTTMethod> (ui_->PTT_method_button_group->checkedId ());
auto ptt_port = ui_->PTT_port_combo_box->currentText ();
if ((TransceiverFactory::PTT_method_DTR == ptt_method || TransceiverFactory::PTT_method_RTS == ptt_method)
&& (ptt_port.isEmpty ()
|| combo_box_item_disabled == ui_->PTT_port_combo_box->itemData (ui_->PTT_port_combo_box->findText (ptt_port), Qt::UserRole - 1)))
{
MessageBox::critical_message (this, tr ("Invalid PTT port"));
return false;
}
return true;
}
int Configuration::impl::exec ()
{
// macros can be modified in the main window
next_macros_.setStringList (macros_.stringList ());
have_rig_ = rig_active_; // record that we started with a rig open
saved_rig_params_ = rig_params_; // used to detect changes that
// require the Transceiver to be
// re-opened
rig_changed_ = false;
initialize_models ();
return QDialog::exec();
}
TransceiverFactory::ParameterPack Configuration::impl::gather_rig_data ()
{
TransceiverFactory::ParameterPack result;
result.rig_name = ui_->rig_combo_box->currentText ();
switch (transceiver_factory_.CAT_port_type (result.rig_name))
{
case TransceiverFactory::Capabilities::network:
result.network_port = ui_->CAT_port_combo_box->currentText ();
result.usb_port = rig_params_.usb_port;
result.serial_port = rig_params_.serial_port;
break;
case TransceiverFactory::Capabilities::usb:
result.usb_port = ui_->CAT_port_combo_box->currentText ();
result.network_port = rig_params_.network_port;
result.serial_port = rig_params_.serial_port;
break;
default:
result.serial_port = ui_->CAT_port_combo_box->currentText ();
result.network_port = rig_params_.network_port;
result.usb_port = rig_params_.usb_port;
break;
}
result.baud = ui_->CAT_serial_baud_combo_box->currentText ().toInt ();
result.data_bits = static_cast<TransceiverFactory::DataBits> (ui_->CAT_data_bits_button_group->checkedId ());
result.stop_bits = static_cast<TransceiverFactory::StopBits> (ui_->CAT_stop_bits_button_group->checkedId ());
result.handshake = static_cast<TransceiverFactory::Handshake> (ui_->CAT_handshake_button_group->checkedId ());
result.force_dtr = ui_->force_DTR_combo_box->isEnabled () && ui_->force_DTR_combo_box->currentIndex () > 0;
result.dtr_high = ui_->force_DTR_combo_box->isEnabled () && 1 == ui_->force_DTR_combo_box->currentIndex ();
result.force_rts = ui_->force_RTS_combo_box->isEnabled () && ui_->force_RTS_combo_box->currentIndex () > 0;
result.rts_high = ui_->force_RTS_combo_box->isEnabled () && 1 == ui_->force_RTS_combo_box->currentIndex ();
result.poll_interval = ui_->CAT_poll_interval_spin_box->value ();
result.ptt_type = static_cast<TransceiverFactory::PTTMethod> (ui_->PTT_method_button_group->checkedId ());
result.ptt_port = ui_->PTT_port_combo_box->currentText ();
result.audio_source = static_cast<TransceiverFactory::TXAudioSource> (ui_->TX_audio_source_button_group->checkedId ());
result.split_mode = static_cast<TransceiverFactory::SplitMode> (ui_->split_mode_button_group->checkedId ());
return result;
}
void Configuration::impl::accept ()
{
// Called when OK button is clicked.
if (!validate ())
{
return; // not accepting
}
// extract all rig related configuration parameters into temporary
// structure for checking if the rig needs re-opening without
// actually updating our live state
auto temp_rig_params = gather_rig_data ();
// open_rig() uses values from models so we use it to validate the
// Transceiver settings before agreeing to accept the configuration
if (temp_rig_params != rig_params_ && !open_rig ())
{
return; // not accepting
}
QDialog::accept(); // do this before accessing custom
// models so that any changes in
// delegates in views get flushed to
// the underlying models before we
// access them
sync_transceiver (true); // force an update
//
// from here on we are bound to accept the new configuration
// parameters so extract values from models and make them live
//
if (next_font_ != font_)
{
font_ = next_font_;
Q_EMIT self_->text_font_changed (font_);
}
if (next_decoded_text_font_ != decoded_text_font_)
{
decoded_text_font_ = next_decoded_text_font_;
Q_EMIT self_->decoded_text_font_changed (decoded_text_font_);
}
color_CQ_ = next_color_CQ_;
color_MyCall_ = next_color_MyCall_;
color_TxMsg_ = next_color_TxMsg_;
color_DXCC_ = next_color_DXCC_;
color_DXCCband_ = next_color_DXCCband_;
color_NewCall_ = next_color_NewCall_;
color_NewCallBand_ = next_color_NewCallBand_;
color_NewGrid_ = next_color_NewGrid_;
color_NewGridBand_ = next_color_NewGridBand_;
color_LoTW_ = next_color_LoTW_;
rig_params_ = temp_rig_params; // now we can go live with the rig
// related configuration parameters
rig_is_dummy_ = TransceiverFactory::basic_transceiver_name_ == rig_params_.rig_name;
// Check to see whether SoundInThread must be restarted,
// and save user parameters.
{
auto const& device_name = ui_->sound_input_combo_box->currentText ();
if (device_name != audio_input_device_.deviceName ())
{
auto const& default_device = QAudioDeviceInfo::defaultInputDevice ();
if (device_name == default_device.deviceName ())
{
audio_input_device_ = default_device;
}
else
{
bool found {false};
Q_FOREACH (auto const& d, QAudioDeviceInfo::availableDevices (QAudio::AudioInput))
{
if (device_name == d.deviceName ())
{
audio_input_device_ = d;
found = true;
}
}
if (!found)
{
audio_input_device_ = default_device;
}
}
restart_sound_input_device_ = true;
}
}
{
auto const& device_name = ui_->sound_output_combo_box->currentText ();
if (device_name != audio_output_device_.deviceName ())
{
auto const& default_device = QAudioDeviceInfo::defaultOutputDevice ();
if (device_name == default_device.deviceName ())
{
audio_output_device_ = default_device;
}
else
{
bool found {false};
Q_FOREACH (auto const& d, QAudioDeviceInfo::availableDevices (QAudio::AudioOutput))
{
if (device_name == d.deviceName ())
{
audio_output_device_ = d;
found = true;
}
}
if (!found)
{
audio_output_device_ = default_device;
}
}
restart_sound_output_device_ = true;
}
}
if (audio_input_channel_ != static_cast<AudioDevice::Channel> (ui_->sound_input_channel_combo_box->currentIndex ()))
{
audio_input_channel_ = static_cast<AudioDevice::Channel> (ui_->sound_input_channel_combo_box->currentIndex ());
restart_sound_input_device_ = true;
}
Q_ASSERT (audio_input_channel_ <= AudioDevice::Right);
if (audio_output_channel_ != static_cast<AudioDevice::Channel> (ui_->sound_output_channel_combo_box->currentIndex ()))
{
audio_output_channel_ = static_cast<AudioDevice::Channel> (ui_->sound_output_channel_combo_box->currentIndex ());
restart_sound_output_device_ = true;
}
Q_ASSERT (audio_output_channel_ <= AudioDevice::Both);
my_callsign_ = ui_->callsign_line_edit->text ();
my_grid_ = ui_->grid_line_edit->text ();
FD_exchange_= ui_->FieldDay_Exchange->text ();
RTTY_exchange_= ui_->RTTY_Exchange->text ();
spot_to_psk_reporter_ = ui_->psk_reporter_check_box->isChecked ();
id_interval_ = ui_->CW_id_interval_spin_box->value ();
ntrials_ = ui_->sbNtrials->value ();
txDelay_ = ui_->sbTxDelay->value ();
aggressive_ = ui_->sbAggressive->value ();
degrade_ = ui_->sbDegrade->value ();
RxBandwidth_ = ui_->sbBandwidth->value ();
id_after_73_ = ui_->CW_id_after_73_check_box->isChecked ();
tx_QSY_allowed_ = ui_->tx_QSY_check_box->isChecked ();
monitor_off_at_startup_ = ui_->monitor_off_check_box->isChecked ();
monitor_last_used_ = ui_->monitor_last_used_check_box->isChecked ();
type_2_msg_gen_ = static_cast<Type2MsgGen> (ui_->type_2_msg_gen_combo_box->currentIndex ());
log_as_RTTY_ = ui_->log_as_RTTY_check_box->isChecked ();
report_in_comments_ = ui_->report_in_comments_check_box->isChecked ();
prompt_to_log_ = ui_->prompt_to_log_check_box->isChecked ();
insert_blank_ = ui_->insert_blank_check_box->isChecked ();
DXCC_ = ui_->DXCC_check_box->isChecked ();
ppfx_ = ui_->ppfx_check_box->isChecked ();
clear_DX_ = ui_->clear_DX_check_box->isChecked ();
miles_ = ui_->miles_check_box->isChecked ();
quick_call_ = ui_->quick_call_check_box->isChecked ();
disable_TX_on_73_ = ui_->disable_TX_on_73_check_box->isChecked ();
watchdog_ = ui_->tx_watchdog_spin_box->value ();
TX_messages_ = ui_->TX_messages_check_box->isChecked ();
data_mode_ = static_cast<DataMode> (ui_->TX_mode_button_group->checkedId ());
save_directory_ = ui_->save_path_display_label->text ();
azel_directory_ = ui_->azel_path_display_label->text ();
enable_VHF_features_ = ui_->enable_VHF_features_check_box->isChecked ();
decode_at_52s_ = ui_->decode_at_52s_check_box->isChecked ();
single_decode_ = ui_->single_decode_check_box->isChecked ();
twoPass_ = ui_->cbTwoPass->isChecked ();
bFox_ = ui_->cbFox->isChecked ();
bHound_ = ui_->cbHound->isChecked ();
if(bFox_ or bHound_) ui_->rbNone->setChecked(true); //###
bGenerate77_ = ui_->cbGenerate77->isChecked();
bDecode77_ = ui_->cbDecode77->isChecked();
bNoSpecial_ = ui_->rbNone->isChecked ();
bFieldDay_ = ui_->rbFieldDay->isChecked ();
bRTTYroundup_ = ui_->rbRTTYroundup->isChecked ();
bNA_VHF_Contest_ = ui_->rbNA_VHF_Contest->isChecked ();
bEU_VHF_Contest_ = ui_->rbEU_VHF_Contest->isChecked ();
x2ToneSpacing_ = ui_->cbx2ToneSpacing->isChecked ();
x4ToneSpacing_ = ui_->cbx4ToneSpacing->isChecked ();
calibration_.intercept = ui_->calibration_intercept_spin_box->value ();
calibration_.slope_ppm = ui_->calibration_slope_ppm_spin_box->value ();
pwrBandTxMemory_ = ui_->checkBoxPwrBandTxMemory->isChecked ();
pwrBandTuneMemory_ = ui_->checkBoxPwrBandTuneMemory->isChecked ();
opCall_=ui_->opCallEntry->text();
auto new_server = ui_->udp_server_line_edit->text ();
if (new_server != udp_server_name_)
{
udp_server_name_ = new_server;
Q_EMIT self_->udp_server_changed (new_server);
}
auto new_port = ui_->udp_server_port_spin_box->value ();
if (new_port != udp_server_port_)
{
udp_server_port_ = new_port;
Q_EMIT self_->udp_server_port_changed (new_port);
}
accept_udp_requests_ = ui_->accept_udp_requests_check_box->isChecked ();
auto new_n1mm_server = ui_->n1mm_server_name_line_edit->text ();
n1mm_server_name_ = new_n1mm_server;
auto new_n1mm_port = ui_->n1mm_server_port_spin_box->value ();
n1mm_server_port_ = new_n1mm_port;
broadcast_to_n1mm_ = ui_->enable_n1mm_broadcast_check_box->isChecked ();
udpWindowToFront_ = ui_->udpWindowToFront->isChecked ();
udpWindowRestore_ = ui_->udpWindowRestore->isChecked ();
if (macros_.stringList () != next_macros_.stringList ())
{
macros_.setStringList (next_macros_.stringList ());
}
region_ = IARURegions::value (ui_->region_combo_box->currentText ());
if (frequencies_.frequency_list () != next_frequencies_.frequency_list ())
{
frequencies_.frequency_list (next_frequencies_.frequency_list ());
frequencies_.sort (FrequencyList_v2::frequency_column);
}
if (stations_.station_list () != next_stations_.station_list ())
{
stations_.station_list(next_stations_.station_list ());
stations_.sort (StationList::band_column);
}
if (ui_->use_dynamic_grid->isChecked() && !use_dynamic_grid_ )
{
// turning on so clear it so only the next location update gets used
dynamic_grid_.clear ();
}
use_dynamic_grid_ = ui_->use_dynamic_grid->isChecked();
write_settings (); // make visible to all
}
void Configuration::impl::reject ()
{
initialize_models (); // reverts to settings as at exec ()
// check if the Transceiver instance changed, in which case we need
// to re open any prior Transceiver type
if (rig_changed_)
{
if (have_rig_)
{
// we have to do this since the rig has been opened since we
// were exec'ed even though it might fail
open_rig ();
}
else
{
close_rig ();
}
}
QDialog::reject ();
}
void Configuration::impl::on_font_push_button_clicked ()
{
next_font_ = QFontDialog::getFont (0, next_font_, this);
}
void Configuration::impl::on_pbCQmsg_clicked()
{
auto new_color = QColorDialog::getColor(next_color_CQ_, this, "CQ Messages Color");
if (new_color.isValid ())
{
next_color_CQ_ = new_color;
ui_->labCQ->setStyleSheet(QString("background: %1").arg(next_color_CQ_.name()));
}
}
void Configuration::impl::on_pbMyCall_clicked()
{
auto new_color = QColorDialog::getColor(next_color_MyCall_, this, "My Call Messages Color");
if (new_color.isValid ())
{
next_color_MyCall_ = new_color;
ui_->labMyCall->setStyleSheet(QString("background: %1").arg(next_color_MyCall_.name()));
}
}
void Configuration::impl::on_pbTxMsg_clicked()
{
auto new_color = QColorDialog::getColor(next_color_TxMsg_, this, "Tx Messages Color");
if (new_color.isValid ())
{
next_color_TxMsg_ = new_color;
ui_->labTx->setStyleSheet(QString("background: %1").arg(next_color_TxMsg_.name()));
}
}
void Configuration::impl::on_pbNewDXCC_clicked()
{
auto new_color = QColorDialog::getColor(next_color_DXCC_, this, "New DXCC Messages Color");
if (new_color.isValid ())
{
next_color_DXCC_ = new_color;
ui_->labDXCC->setStyleSheet(QString("background: %1").arg(next_color_DXCC_.name()));
}
}
void Configuration::impl::on_pbNewDXCCband_clicked()
{
auto new_color = QColorDialog::getColor(next_color_DXCCband_, this, "New DXCCband Color");
if (new_color.isValid ())
{
next_color_DXCCband_ = new_color;
ui_->labDXCCband->setStyleSheet(QString("background: %1").arg(next_color_DXCCband_.name()));
}
}
void Configuration::impl::on_pbNewCall_clicked()
{
auto new_color = QColorDialog::getColor(next_color_NewCall_, this, "New Call Messages Color");
if (new_color.isValid ())
{
next_color_NewCall_ = new_color;
ui_->labNewCall->setStyleSheet(QString("background: %1").arg(next_color_NewCall_.name()));
}
}
void Configuration::impl::on_pbNewCallBand_clicked()
{
auto new_color = QColorDialog::getColor(next_color_NewCallBand_, this, "New CallBand Color");
if (new_color.isValid ())
{
next_color_NewCallBand_ = new_color;
ui_->labNewCallBand->setStyleSheet(QString("background: %1").arg(next_color_NewCallBand_.name()));
}
}
void Configuration::impl::on_pbNewGrid_clicked()
{
auto new_color = QColorDialog::getColor(next_color_NewGrid_, this, "New Grid Messages Color");
if (new_color.isValid ())
{
next_color_NewGrid_ = new_color;
ui_->labNewGrid->setStyleSheet(QString("background: %1").arg(next_color_NewGrid_.name()));
}
}
void Configuration::impl::on_pbNewGridBand_clicked()
{
auto new_color = QColorDialog::getColor(next_color_NewGridBand_, this, "New GridBand Messages Color");
if (new_color.isValid ())
{
next_color_NewGridBand_ = new_color;
ui_->labNewGridBand->setStyleSheet(QString("background: %1").arg(next_color_NewGridBand_.name()));
}
}
void Configuration::impl::on_pbLoTW_clicked()
{
auto new_color = QColorDialog::getColor(next_color_LoTW_, this, "Not in LoTW Color");
if (new_color.isValid ()) {
next_color_LoTW_ = new_color;
ui_->labLoTW->setStyleSheet(QString("color: %1").arg(next_color_LoTW_.name()));
}
}
void Configuration::impl::on_pbResetDefaults_clicked()
{
next_color_CQ_ = color_CQ_ = "#66ff66";
next_color_MyCall_ = color_MyCall_ = "#ff6666";
next_color_TxMsg_ = color_TxMsg_ = "#ffff00";
next_color_DXCC_ = color_DXCC_ = "#ff00ff";
next_color_DXCCband_ = color_DXCCband_ = "#ffaaff";
next_color_NewCall_ = color_NewCall_ = "#66b2ff";
next_color_NewCallBand_ = color_NewCallBand_ = "#99ffff";
next_color_NewGrid_ = color_NewGrid_ = "#ffaa00";
next_color_NewGridBand_ = color_NewGridBand_ = "#ffcc99";
next_color_LoTW_ = color_LoTW_ = "#5500ff";
ui_->labCQ->setStyleSheet(QString("background: %1").arg(next_color_CQ_.name()));
ui_->labMyCall->setStyleSheet(QString("background: %1").arg(next_color_MyCall_.name()));
ui_->labTx->setStyleSheet(QString("background: %1").arg(next_color_TxMsg_.name()));
ui_->labDXCC->setStyleSheet(QString("background: %1").arg(next_color_DXCC_.name()));
ui_->labDXCCband->setStyleSheet(QString("background: %1").arg(next_color_DXCCband_.name()));
ui_->labNewCall->setStyleSheet(QString("background: %1").arg(next_color_NewCall_.name()));
ui_->labNewCallBand->setStyleSheet(QString("background: %1").arg(next_color_NewCallBand_.name()));
ui_->labNewGrid->setStyleSheet(QString("background: %1").arg(next_color_NewGrid_.name()));
ui_->labNewGridBand->setStyleSheet(QString("background: %1").arg(next_color_NewGridBand_.name()));
ui_->labLoTW->setStyleSheet(QString("color: %1").arg(next_color_LoTW_.name()));
}
void Configuration::impl::on_decoded_text_font_push_button_clicked ()
{
next_decoded_text_font_ = QFontDialog::getFont (0, decoded_text_font_ , this
, tr ("WSJT-X Decoded Text Font Chooser")
#if QT_VERSION >= 0x050201
, QFontDialog::MonospacedFonts
#endif
);
}
void Configuration::impl::on_PTT_port_combo_box_activated (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_port_combo_box_activated (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_serial_baud_combo_box_currentIndexChanged (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_handshake_button_group_buttonClicked (int /* id */)
{
set_rig_invariants ();
}
void Configuration::impl::on_rig_combo_box_currentIndexChanged (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_data_bits_button_group_buttonClicked (int /* id */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_stop_bits_button_group_buttonClicked (int /* id */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_poll_interval_spin_box_valueChanged (int /* value */)
{
set_rig_invariants ();
}
void Configuration::impl::on_split_mode_button_group_buttonClicked (int /* id */)
{
set_rig_invariants ();
}
void Configuration::impl::on_test_CAT_push_button_clicked ()
{
if (!validate ())
{
return;
}
ui_->test_CAT_push_button->setStyleSheet ({});
if (open_rig (true))
{
//Q_EMIT sync (true);
}
set_rig_invariants ();
}
void Configuration::impl::on_test_PTT_push_button_clicked (bool checked)
{
ui_->test_PTT_push_button->setChecked (!checked); // let status
// update check us
if (!validate ())
{
return;
}
if (open_rig ())
{
Q_EMIT self_->transceiver_ptt (checked);
}
}
void Configuration::impl::on_force_DTR_combo_box_currentIndexChanged (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_force_RTS_combo_box_currentIndexChanged (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_PTT_method_button_group_buttonClicked (int /* id */)
{
set_rig_invariants ();
}
void Configuration::impl::on_sound_input_combo_box_currentTextChanged (QString const& text)
{
default_audio_input_device_selected_ = QAudioDeviceInfo::defaultInputDevice ().deviceName () == text;
}
void Configuration::impl::on_sound_output_combo_box_currentTextChanged (QString const& text)
{
default_audio_output_device_selected_ = QAudioDeviceInfo::defaultOutputDevice ().deviceName () == text;
}
void Configuration::impl::on_add_macro_line_edit_editingFinished ()
{
ui_->add_macro_line_edit->setText (ui_->add_macro_line_edit->text ().toUpper ());
}
void Configuration::impl::on_delete_macro_push_button_clicked (bool /* checked */)
{
auto selection_model = ui_->macros_list_view->selectionModel ();
if (selection_model->hasSelection ())
{
// delete all selected items
delete_selected_macros (selection_model->selectedRows ());
}
}
void Configuration::impl::delete_macro ()
{
auto selection_model = ui_->macros_list_view->selectionModel ();
if (!selection_model->hasSelection ())
{
// delete item under cursor if any
auto index = selection_model->currentIndex ();
if (index.isValid ())
{
next_macros_.removeRow (index.row ());
}
}
else
{
// delete the whole selection
delete_selected_macros (selection_model->selectedRows ());
}
}
void Configuration::impl::delete_selected_macros (QModelIndexList selected_rows)
{
// sort in reverse row order so that we can delete without changing
// indices underneath us
qSort (selected_rows.begin (), selected_rows.end (), [] (QModelIndex const& lhs, QModelIndex const& rhs)
{
return rhs.row () < lhs.row (); // reverse row ordering
});
// now delete them
Q_FOREACH (auto index, selected_rows)
{
next_macros_.removeRow (index.row ());
}
}
void Configuration::impl::on_add_macro_push_button_clicked (bool /* checked */)
{
if (next_macros_.insertRow (next_macros_.rowCount ()))
{
auto index = next_macros_.index (next_macros_.rowCount () - 1);
ui_->macros_list_view->setCurrentIndex (index);
next_macros_.setData (index, ui_->add_macro_line_edit->text ());
ui_->add_macro_line_edit->clear ();
}
}
void Configuration::impl::delete_frequencies ()
{
auto selection_model = ui_->frequencies_table_view->selectionModel ();
selection_model->select (selection_model->selection (), QItemSelectionModel::SelectCurrent | QItemSelectionModel::Rows);
next_frequencies_.removeDisjointRows (selection_model->selectedRows ());
ui_->frequencies_table_view->resizeColumnToContents (FrequencyList_v2::mode_column);
}
void Configuration::impl::load_frequencies ()
{
auto file_name = QFileDialog::getOpenFileName (this, tr ("Load Working Frequencies"), writeable_data_dir_.absolutePath (), tr ("Frequency files (*.qrg);;All files (*.*)"));
if (!file_name.isNull ())
{
auto const list = read_frequencies_file (file_name);
if (list.size ()
&& (!next_frequencies_.frequency_list ().size ()
|| MessageBox::Yes == MessageBox::query_message (this
, tr ("Replace Working Frequencies")
, tr ("Are you sure you want to discard your current "
"working frequencies and replace them with the "
"loaded ones?"))))
{
next_frequencies_.frequency_list (list); // update the model
}
}
}
void Configuration::impl::merge_frequencies ()
{
auto file_name = QFileDialog::getOpenFileName (this, tr ("Merge Working Frequencies"), writeable_data_dir_.absolutePath (), tr ("Frequency files (*.qrg);;All files (*.*)"));
if (!file_name.isNull ())
{
next_frequencies_.frequency_list_merge (read_frequencies_file (file_name)); // update the model
}
}
FrequencyList_v2::FrequencyItems Configuration::impl::read_frequencies_file (QString const& file_name)
{
QFile frequencies_file {file_name};
frequencies_file.open (QFile::ReadOnly);
QDataStream ids {&frequencies_file};
FrequencyList_v2::FrequencyItems list;
quint32 magic;
ids >> magic;
if (qrg_magic != magic)
{
MessageBox::warning_message (this, tr ("Not a valid frequencies file"), tr ("Incorrect file magic"));
return list;
}
quint32 version;
ids >> version;
// handle version checks and QDataStream version here if
// necessary
if (version > qrg_version)
{
MessageBox::warning_message (this, tr ("Not a valid frequencies file"), tr ("Version is too new"));
return list;
}
// de-serialize the data using version if necessary to
// handle old schemata
ids >> list;
if (ids.status () != QDataStream::Ok || !ids.atEnd ())
{
MessageBox::warning_message (this, tr ("Not a valid frequencies file"), tr ("Contents corrupt"));
list.clear ();
return list;
}
return list;
}
void Configuration::impl::save_frequencies ()
{
auto file_name = QFileDialog::getSaveFileName (this, tr ("Save Working Frequencies"), writeable_data_dir_.absolutePath (), tr ("Frequency files (*.qrg);;All files (*.*)"));
if (!file_name.isNull ())
{
QFile frequencies_file {file_name};
frequencies_file.open (QFile::WriteOnly);
QDataStream ods {&frequencies_file};
auto selection_model = ui_->frequencies_table_view->selectionModel ();
if (selection_model->hasSelection ()
&& MessageBox::Yes == MessageBox::query_message (this
, tr ("Only Save Selected Working Frequencies")
, tr ("Are you sure you want to save only the "
"working frequencies that are currently selected? "
"Click No to save all.")))
{
selection_model->select (selection_model->selection (), QItemSelectionModel::SelectCurrent | QItemSelectionModel::Rows);
ods << qrg_magic << qrg_version << next_frequencies_.frequency_list (selection_model->selectedRows ());
}
else
{
ods << qrg_magic << qrg_version << next_frequencies_.frequency_list ();
}
}
}
void Configuration::impl::reset_frequencies ()
{
if (MessageBox::Yes == MessageBox::query_message (this, tr ("Reset Working Frequencies")
, tr ("Are you sure you want to discard your current "
"working frequencies and replace them with default "
"ones?")))
{
next_frequencies_.reset_to_defaults ();
}
}
void Configuration::impl::insert_frequency ()
{
if (QDialog::Accepted == frequency_dialog_->exec ())
{
ui_->frequencies_table_view->setCurrentIndex (next_frequencies_.add (frequency_dialog_->item ()));
ui_->frequencies_table_view->resizeColumnToContents (FrequencyList_v2::mode_column);
}
}
void Configuration::impl::delete_stations ()
{
auto selection_model = ui_->stations_table_view->selectionModel ();
selection_model->select (selection_model->selection (), QItemSelectionModel::SelectCurrent | QItemSelectionModel::Rows);
next_stations_.removeDisjointRows (selection_model->selectedRows ());
ui_->stations_table_view->resizeColumnToContents (StationList::band_column);
ui_->stations_table_view->resizeColumnToContents (StationList::offset_column);
}
void Configuration::impl::insert_station ()
{
if (QDialog::Accepted == station_dialog_->exec ())
{
ui_->stations_table_view->setCurrentIndex (next_stations_.add (station_dialog_->station ()));
ui_->stations_table_view->resizeColumnToContents (StationList::band_column);
ui_->stations_table_view->resizeColumnToContents (StationList::offset_column);
}
}
void Configuration::impl::on_save_path_select_push_button_clicked (bool /* checked */)
{
QFileDialog fd {this, tr ("Save Directory"), ui_->save_path_display_label->text ()};
fd.setFileMode (QFileDialog::Directory);
fd.setOption (QFileDialog::ShowDirsOnly);
if (fd.exec ())
{
if (fd.selectedFiles ().size ())
{
ui_->save_path_display_label->setText (fd.selectedFiles ().at (0));
}
}
}
void Configuration::impl::on_azel_path_select_push_button_clicked (bool /* checked */)
{
QFileDialog fd {this, tr ("AzEl Directory"), ui_->azel_path_display_label->text ()};
fd.setFileMode (QFileDialog::Directory);
fd.setOption (QFileDialog::ShowDirsOnly);
if (fd.exec ()) {
if (fd.selectedFiles ().size ()) {
ui_->azel_path_display_label->setText(fd.selectedFiles().at(0));
}
}
}
void Configuration::impl::on_calibration_intercept_spin_box_valueChanged (double)
{
rig_active_ = false; // force reset
}
void Configuration::impl::on_calibration_slope_ppm_spin_box_valueChanged (double)
{
rig_active_ = false; // force reset
}
void Configuration::impl::on_cbFox_clicked (bool checked)
{
if(checked) {
ui_->cbHound->setChecked (false);
ui_->rbNone->setChecked(true);
}
chk77();
}
void Configuration::impl::on_cbHound_clicked (bool checked)
{
if(checked) {
ui_->cbFox->setChecked (false);
ui_->rbNone->setChecked(true);
}
chk77();
}
void Configuration::impl::chk77()
{
bool b77OK = !ui_->cbFox->isChecked() and !ui_->cbHound->isChecked();
ui_->groupBox_8->setEnabled(b77OK);
ui_->groupBox_9->setEnabled(b77OK);
if(!b77OK) {
ui_->cbGenerate77->setChecked(false);
ui_->cbDecode77->setChecked(false);
}
}
void Configuration::impl::on_rbNone_toggled(bool b)
{
if(!b) ui_->cbGenerate77->setChecked(true);
}
void Configuration::impl::on_cbx2ToneSpacing_clicked(bool b)
{
if(b) ui_->cbx4ToneSpacing->setChecked(false);
}
void Configuration::impl::on_cbx4ToneSpacing_clicked(bool b)
{
if(b) ui_->cbx2ToneSpacing->setChecked(false);
}
bool Configuration::impl::have_rig ()
{
if (!open_rig ())
{
MessageBox::critical_message (this, tr ("Rig control error")
, tr ("Failed to open connection to rig"));
}
return rig_active_;
}
bool Configuration::impl::open_rig (bool force)
{
auto result = false;
auto const rig_data = gather_rig_data ();
if (force || !rig_active_ || rig_data != saved_rig_params_)
{
try
{
close_rig ();
// create a new Transceiver object
auto rig = transceiver_factory_.create (rig_data, transceiver_thread_);
cached_rig_state_ = Transceiver::TransceiverState {};
// hook up Configuration transceiver control signals to Transceiver slots
//
// these connections cross the thread boundary
rig_connections_ << connect (this, &Configuration::impl::set_transceiver,
rig.get (), &Transceiver::set);
// hook up Transceiver signals to Configuration signals
//
// these connections cross the thread boundary
rig_connections_ << connect (rig.get (), &Transceiver::resolution, this, [=] (int resolution) {
rig_resolution_ = resolution;
});
rig_connections_ << connect (rig.get (), &Transceiver::update, this, &Configuration::impl::handle_transceiver_update);
rig_connections_ << connect (rig.get (), &Transceiver::failure, this, &Configuration::impl::handle_transceiver_failure);
// setup thread safe startup and close down semantics
rig_connections_ << connect (this, &Configuration::impl::start_transceiver, rig.get (), &Transceiver::start);
rig_connections_ << connect (this, &Configuration::impl::stop_transceiver, rig.get (), &Transceiver::stop);
auto p = rig.release (); // take ownership
// schedule destruction on thread quit
connect (transceiver_thread_, &QThread::finished, p, &QObject::deleteLater);
// schedule eventual destruction for non-closing situations
//
// must be queued connection to avoid premature
// self-immolation since finished signal is going to be
// emitted from the object that will get destroyed in its
// own stop slot i.e. a same thread signal to slot
// connection which by default will be reduced to a method
// function call.
connect (p, &Transceiver::finished, p, &Transceiver::deleteLater, Qt::QueuedConnection);
ui_->test_CAT_push_button->setStyleSheet ({});
rig_active_ = true;
Q_EMIT start_transceiver (++transceiver_command_number_); // start rig on its thread
result = true;
}
catch (std::exception const& e)
{
handle_transceiver_failure (e.what ());
}
saved_rig_params_ = rig_data;
rig_changed_ = true;
}
else
{
result = true;
}
return result;
}
void Configuration::impl::set_cached_mode ()
{
MODE mode {Transceiver::UNK};
// override cache mode with what we want to enforce which includes
// UNK (unknown) where we want to leave the rig mode untouched
switch (data_mode_)
{
case data_mode_USB: mode = Transceiver::USB; break;
case data_mode_data: mode = Transceiver::DIG_U; break;
default: break;
}
cached_rig_state_.mode (mode);
}
void Configuration::impl::transceiver_frequency (Frequency f)
{
cached_rig_state_.online (true); // we want the rig online
set_cached_mode ();
// apply any offset & calibration
// we store the offset here for use in feedback from the rig, we
// cannot absolutely determine if the offset should apply but by
// simply picking an offset when the Rx frequency is set and
// sticking to it we get sane behaviour
current_offset_ = stations_.offset (f);
cached_rig_state_.frequency (apply_calibration (f + current_offset_));
Q_EMIT set_transceiver (cached_rig_state_, ++transceiver_command_number_);
}
void Configuration::impl::transceiver_tx_frequency (Frequency f)
{
Q_ASSERT (!f || split_mode ());
if (split_mode ())
{
cached_rig_state_.online (true); // we want the rig online
set_cached_mode ();
cached_rig_state_.split (f);
cached_rig_state_.tx_frequency (f);
// lookup offset for tx and apply calibration
if (f)
{
// apply and offset and calibration
// we store the offset here for use in feedback from the
// rig, we cannot absolutely determine if the offset should
// apply but by simply picking an offset when the Rx
// frequency is set and sticking to it we get sane behaviour
current_tx_offset_ = stations_.offset (f);
cached_rig_state_.tx_frequency (apply_calibration (f + current_tx_offset_));
}
Q_EMIT set_transceiver (cached_rig_state_, ++transceiver_command_number_);
}
}
void Configuration::impl::transceiver_mode (MODE m)
{
cached_rig_state_.online (true); // we want the rig online
cached_rig_state_.mode (m);
Q_EMIT set_transceiver (cached_rig_state_, ++transceiver_command_number_);
}
void Configuration::impl::transceiver_ptt (bool on)
{
cached_rig_state_.online (true); // we want the rig online
set_cached_mode ();
cached_rig_state_.ptt (on);
Q_EMIT set_transceiver (cached_rig_state_, ++transceiver_command_number_);
}
void Configuration::impl::sync_transceiver (bool /*force_signal*/)
{
// pass this on as cache must be ignored
// Q_EMIT sync (force_signal);
}
void Configuration::impl::handle_transceiver_update (TransceiverState const& state,
unsigned sequence_number)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::handle_transceiver_update: Transceiver State #:" << sequence_number << state;
#endif
// only follow rig on some information, ignore other stuff
cached_rig_state_.online (state.online ());
cached_rig_state_.frequency (state.frequency ());
cached_rig_state_.mode (state.mode ());
cached_rig_state_.split (state.split ());
if (state.online ())
{
ui_->test_PTT_push_button->setChecked (state.ptt ());
if (isVisible ())
{
ui_->test_CAT_push_button->setStyleSheet ("QPushButton {background-color: green;}");
auto const& rig = ui_->rig_combo_box->currentText ();
auto ptt_method = static_cast<TransceiverFactory::PTTMethod> (ui_->PTT_method_button_group->checkedId ());
auto CAT_PTT_enabled = transceiver_factory_.has_CAT_PTT (rig);
ui_->test_PTT_push_button->setEnabled ((TransceiverFactory::PTT_method_CAT == ptt_method && CAT_PTT_enabled)
|| TransceiverFactory::PTT_method_DTR == ptt_method
|| TransceiverFactory::PTT_method_RTS == ptt_method);
}
}
else
{
close_rig ();
}
// pass on to clients if current command is processed
if (sequence_number == transceiver_command_number_)
{
TransceiverState reported_state {state};
// take off calibration & offset
reported_state.frequency (remove_calibration (reported_state.frequency ()) - current_offset_);
if (reported_state.tx_frequency ())
{
// take off calibration & offset
reported_state.tx_frequency (remove_calibration (reported_state.tx_frequency ()) - current_tx_offset_);
}
Q_EMIT self_->transceiver_update (reported_state);
}
}
void Configuration::impl::handle_transceiver_failure (QString const& reason)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::handle_transceiver_failure: reason:" << reason;
#endif
close_rig ();
ui_->test_PTT_push_button->setChecked (false);
if (isVisible ())
{
MessageBox::critical_message (this, tr ("Rig failure"), reason);
}
else
{
// pass on if our dialog isn't active
Q_EMIT self_->transceiver_failure (reason);
}
}
void Configuration::impl::close_rig ()
{
ui_->test_PTT_push_button->setEnabled (false);
// revert to no rig configured
if (rig_active_)
{
ui_->test_CAT_push_button->setStyleSheet ("QPushButton {background-color: red;}");
Q_EMIT stop_transceiver ();
for (auto const& connection: rig_connections_)
{
disconnect (connection);
}
rig_connections_.clear ();
rig_active_ = false;
}
}
// load the available audio devices into the selection combo box and
// select the default device if the current device isn't set or isn't
// available
bool Configuration::impl::load_audio_devices (QAudio::Mode mode, QComboBox * combo_box, QAudioDeviceInfo * device)
{
using std::copy;
using std::back_inserter;
bool result {false};
combo_box->clear ();
int current_index = -1;
int default_index = -1;
int extra_items {0};
auto const& default_device = (mode == QAudio::AudioInput ? QAudioDeviceInfo::defaultInputDevice () : QAudioDeviceInfo::defaultOutputDevice ());
// deal with special default audio devices on Windows
if ("Default Input Device" == default_device.deviceName ()
|| "Default Output Device" == default_device.deviceName ())
{
default_index = 0;
QList<QVariant> channel_counts;
auto scc = default_device.supportedChannelCounts ();
copy (scc.cbegin (), scc.cend (), back_inserter (channel_counts));
combo_box->addItem (default_device.deviceName (), channel_counts);
++extra_items;
if (default_device == *device)
{
current_index = 0;
result = true;
}
}
Q_FOREACH (auto const& p, QAudioDeviceInfo::availableDevices (mode))
{
// qDebug () << "Audio device: input:" << (QAudio::AudioInput == mode) << "name:" << p.deviceName () << "preferred format:" << p.preferredFormat () << "endians:" << p.supportedByteOrders () << "codecs:" << p.supportedCodecs () << "channels:" << p.supportedChannelCounts () << "rates:" << p.supportedSampleRates () << "sizes:" << p.supportedSampleSizes () << "types:" << p.supportedSampleTypes ();
// convert supported channel counts into something we can store in the item model
QList<QVariant> channel_counts;
auto scc = p.supportedChannelCounts ();
copy (scc.cbegin (), scc.cend (), back_inserter (channel_counts));
combo_box->addItem (p.deviceName (), channel_counts);
if (p == *device)
{
current_index = combo_box->count () - 1;
}
else if (p == default_device)
{
default_index = combo_box->count () - 1;
}
}
if (current_index < 0) // not found - use default
{
*device = default_device;
result = true;
current_index = default_index;
}
combo_box->setCurrentIndex (current_index);
return result;
}
// enable only the channels that are supported by the selected audio device
void Configuration::impl::update_audio_channels (QComboBox const * source_combo_box, int index, QComboBox * combo_box, bool allow_both)
{
// disable all items
for (int i (0); i < combo_box->count (); ++i)
{
combo_box->setItemData (i, combo_box_item_disabled, Qt::UserRole - 1);
}
Q_FOREACH (QVariant const& v, source_combo_box->itemData (index).toList ())
{
// enable valid options
int n {v.toInt ()};
if (2 == n)
{
combo_box->setItemData (AudioDevice::Left, combo_box_item_enabled, Qt::UserRole - 1);
combo_box->setItemData (AudioDevice::Right, combo_box_item_enabled, Qt::UserRole - 1);
if (allow_both)
{
combo_box->setItemData (AudioDevice::Both, combo_box_item_enabled, Qt::UserRole - 1);
}
}
else if (1 == n)
{
combo_box->setItemData (AudioDevice::Mono, combo_box_item_enabled, Qt::UserRole - 1);
}
}
}
// load all the supported rig names into the selection combo box
void Configuration::impl::enumerate_rigs ()
{
ui_->rig_combo_box->clear ();
auto rigs = transceiver_factory_.supported_transceivers ();
for (auto r = rigs.cbegin (); r != rigs.cend (); ++r)
{
if ("None" == r.key ())
{
// put None first
ui_->rig_combo_box->insertItem (0, r.key (), r.value ().model_number_);
}
else
{
int i;
for(i=1;i<ui_->rig_combo_box->count() && (r.key().toLower() > ui_->rig_combo_box->itemText(i).toLower());++i);
if (i < ui_->rig_combo_box->count()) ui_->rig_combo_box->insertItem (i, r.key (), r.value ().model_number_);
else ui_->rig_combo_box->addItem (r.key (), r.value ().model_number_);
}
}
ui_->rig_combo_box->setCurrentText (rig_params_.rig_name);
}
void Configuration::impl::fill_port_combo_box (QComboBox * cb)
{
auto current_text = cb->currentText ();
cb->clear ();
Q_FOREACH (auto const& p, QSerialPortInfo::availablePorts ())
{
if (!p.portName ().contains ( "NULL" )) // virtual serial port pairs
{
// remove possibly confusing Windows device path (OK because
// it gets added back by Hamlib)
cb->addItem (p.systemLocation ().remove (QRegularExpression {R"(^\\\\\.\\)"}));
}
}
cb->addItem("USB");
cb->setEditText (current_text);
}
auto Configuration::impl::apply_calibration (Frequency f) const -> Frequency
{
if (frequency_calibration_disabled_) return f;
return std::llround (calibration_.intercept
+ (1. + calibration_.slope_ppm / 1.e6) * f);
}
auto Configuration::impl::remove_calibration (Frequency f) const -> Frequency
{
if (frequency_calibration_disabled_) return f;
return std::llround ((f - calibration_.intercept)
/ (1. + calibration_.slope_ppm / 1.e6));
}
#if !defined (QT_NO_DEBUG_STREAM)
ENUM_QDEBUG_OPS_IMPL (Configuration, DataMode);
ENUM_QDEBUG_OPS_IMPL (Configuration, Type2MsgGen);
#endif
ENUM_QDATASTREAM_OPS_IMPL (Configuration, DataMode);
ENUM_QDATASTREAM_OPS_IMPL (Configuration, Type2MsgGen);
ENUM_CONVERSION_OPS_IMPL (Configuration, DataMode);
ENUM_CONVERSION_OPS_IMPL (Configuration, Type2MsgGen);