mirror of
https://github.com/saitohirga/WSJT-X.git
synced 2024-09-09 06:46:39 -04:00
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6953 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
1510 lines
45 KiB
CMake
1510 lines
45 KiB
CMake
cmake_minimum_required (VERSION 2.8.10 FATAL_ERROR)
|
|
|
|
if (APPLE)
|
|
#
|
|
# The following variables define the portability and compatability attributes of the Mac OS X build
|
|
# they are choosen with care and should not be changed without good cause. Note that they preclude
|
|
# doing a default build on OS X 10.7 since there is no 10.9 SDK available for Mac OS X 10.7. This doesn't
|
|
# preclude builds on newer versions of OS X being installed on Mac OS X 10.7, in fact it is exacty these
|
|
# options that ensure offcial build run on 10.7 and newer versions of Mac OS X. At some point it may
|
|
# be that some new version cannot be supported as well as 10.7, at that point the deployment target below
|
|
# must be moved on to 10.8 and we can no longer support Mac OS X 10.7.
|
|
#
|
|
# Among other things these options are chosen to match the portability and compatability options of the
|
|
# Qt framework dylibs which can be checked as follows:
|
|
#
|
|
# otool -l <binary> | grep -A3 LC_VERSION_MIN_MACOSX
|
|
#
|
|
set (CMAKE_OSX_DEPLOYMENT_TARGET 10.7
|
|
CACHE STRING "Earliest version of OS X supported
|
|
|
|
Earliest version we can support with C++11 & libc++ is 10.7.
|
|
Do not override this if you intend to build an official deployable installer.")
|
|
set (CMAKE_OSX_SYSROOT /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk
|
|
CACHE STRING "Mac OS X SDK to build with
|
|
|
|
Change this to the newest SDK available that you can install on your system (10.9 preferred).
|
|
Do not override this if you intend to build an official deployable installer.")
|
|
endif (APPLE)
|
|
|
|
project (wsjtx C CXX Fortran)
|
|
|
|
#
|
|
# CMake policies
|
|
#
|
|
if (POLICY CMP0020)
|
|
cmake_policy (SET CMP0020 NEW) # link to Qt winmain on Windows
|
|
endif (POLICY CMP0020)
|
|
|
|
if (POLICY CMP0043)
|
|
cmake_policy (SET CMP0043 NEW) # ignore COMPILE_DEFINITIONS_<CONFIG>
|
|
endif (POLICY CMP0043)
|
|
|
|
if (POLICY CMP0063)
|
|
cmake_policy (SET CMP0063 NEW) # honour visibility properties for all library types
|
|
endif (POLICY CMP0063)
|
|
|
|
include (${PROJECT_SOURCE_DIR}/CMake/VersionCompute.cmake)
|
|
message (STATUS "Building ${CMAKE_PROJECT_NAME}-${wsjtx_VERSION}")
|
|
|
|
#
|
|
# project information
|
|
#
|
|
set (PROJECT_NAME "WSJT-X")
|
|
set (PROJECT_VENDOR "Joe Taylor, K1JT")
|
|
set (PROJECT_CONTACT "Joe Taylor <k1jt@arrl.net>")
|
|
set (PROJECT_COPYRIGHT "Copyright (C) 2001-2016 by Joe Taylor, K1JT")
|
|
set (PROJECT_HOMEPAGE http://www.physics.princeton.edu/pulsar/K1JT/wsjtx.html)
|
|
set (PROJECT_MANUAL wsjtx-main)
|
|
set (PROJECT_MANUAL_DIRECTORY_URL http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/)
|
|
set (PROJECT_SAMPLES_URL http://downloads.sourceforge.net/project/wsjt/)
|
|
set (PROJECT_SAMPLES_UPLOAD_DEST frs.sourceforge.net:/home/frs/project/wsjt/)
|
|
set (PROJECT_SUMMARY_DESCRIPTION "${PROJECT_NAME} - JT9 and JT65 Modes for LF, MF and HF Amateur Radio.")
|
|
set (PROJECT_DESCRIPTION "${PROJECT_SUMMARY_DESCRIPTION}
|
|
${PROJECT_NAME} implements JT9, a new mode designed especially for the LF, MF,
|
|
and HF bands, as well as the popular mode JT65. Both modes were
|
|
designed for making reliable, confirmed QSOs under extreme
|
|
weak-signal conditions. They use nearly identical message structure
|
|
and source encoding. JT65 was designed for EME (“moonbounce”) on the
|
|
VHF/UHF bands and has also proved very effective for worldwide QRP
|
|
communication at HF; in contrast, JT9 is optimized for HF and lower
|
|
frequencies. JT9 is about 2 dB more sensitive than JT65A while using
|
|
less than 10% of the bandwidth. World-wide QSOs are possible with
|
|
power levels of a few watts and compromise antennas. A 2 kHz slice
|
|
of spectrum is essentially full when occupied by ten JT65 signals.
|
|
As many as 100 JT9 signals can fit into the same space, without
|
|
overlap.
|
|
.
|
|
${PROJECT_NAME} offers a “bi-lingual“ operating mode in which you can transmit
|
|
and receive JT65 and JT9 signals, switching between modes
|
|
automatically as needed. Displayed bandwidth can be as large as 5
|
|
kHz. If your receiver has as upper-sideband filter at least 4 kHz
|
|
wide, you can have all the typical JT65 and JT9 activity on screen at
|
|
once, available for making QSOs with a click of the mouse. Even with
|
|
standard SSB-width IF filters, switching between JT65 and JT9 modes
|
|
is quick and convenient. Be sure to read the online ${PROJECT_NAME} User's
|
|
Guide.")
|
|
|
|
set (CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/CMake/Modules ${CMAKE_MODULE_PATH})
|
|
|
|
# make sure that the default configuration is a RELEASE
|
|
if (NOT CMAKE_BUILD_TYPE)
|
|
set (CMAKE_BUILD_TYPE RELEASE CACHE STRING
|
|
"Choose the type of build, options are: None Debug Release."
|
|
FORCE)
|
|
endif (NOT CMAKE_BUILD_TYPE)
|
|
if (CMAKE_BUILD_TYPE MATCHES "[Dd][Ee][Bb][Uu][Gg]")
|
|
set (is_debug_build 1)
|
|
endif ()
|
|
|
|
|
|
#
|
|
# Options & features
|
|
#
|
|
# Some of these directly effect compilation by being defined in
|
|
# wsjtx_config.h.in which makes them available to the C/C++
|
|
# pre-processor.
|
|
#
|
|
include (CMakeDependentOption)
|
|
|
|
# Allow the developer to select if Dynamic or Static libraries are built
|
|
OPTION (BUILD_SHARED_LIBS "Build Shared Libraries" OFF)
|
|
# Set the LIB_TYPE variable to STATIC
|
|
SET (LIB_TYPE STATIC)
|
|
if (BUILD_SHARED_LIBS)
|
|
# User wants to build Dynamic Libraries, so change the LIB_TYPE variable to CMake keyword 'SHARED'
|
|
set (LIB_TYPE SHARED)
|
|
endif (BUILD_SHARED_LIBS)
|
|
|
|
option (UPDATE_TRANSLATIONS "Update source translation translations/*.ts
|
|
files (WARNING: make clean will delete the source .ts files! Danger!)")
|
|
option (WSJT_SHARED_RUNTIME "Debugging option that allows running from a shared Cloud directory.")
|
|
option (WSJT_QDEBUG_TO_FILE "Redirect Qt debuging messages to a trace file.")
|
|
option (WSJT_TRACE_CAT "Debugging option that turns on CAT diagnostics.")
|
|
option (WSJT_TRACE_CAT_POLLS "Debugging option that turns on CAT diagnostics during polling.")
|
|
option (WSJT_HAMLIB_TRACE "Debugging option that turns on minimal Hamlib internal diagnostics.")
|
|
option (WSJT_SOFT_KEYING "Apply a ramp to CW keying envelope to reduce transients." ON)
|
|
option (WSJT_SKIP_MANPAGES "Skip *nix manpage generation.")
|
|
option (WSJT_GENERATE_DOCS "Generate documentation files." ON)
|
|
option (WSJT_RIG_NONE_CAN_SPLIT "Allow split operation with \"None\" as rig.")
|
|
|
|
CMAKE_DEPENDENT_OPTION (WSJT_HAMLIB_VERBOSE_TRACE "Debugging option that turns on full Hamlib internal diagnostics." OFF WSJT_HAMLIB_TRACE OFF)
|
|
CMAKE_DEPENDENT_OPTION (WSJT_QDEBUG_IN_RELEASE "Leave Qt debugging statements in Release configuration." OFF
|
|
"NOT is_debug_build" OFF)
|
|
CMAKE_DEPENDENT_OPTION (WSJT_ENABLE_EXPERIMENTAL_FEATURES "Enable features not fully ready for public releases." ON
|
|
is_debug_build OFF)
|
|
CMAKE_DEPENDENT_OPTION (WSJT_CREATE_WINMAIN
|
|
"The wsjtx target is normally built as GUI executable with a WinMain entry point on Windows,
|
|
if you want a console application instead then set this option to OFF.
|
|
|
|
If you just want to see the debug output from the application then the easiest way is to
|
|
attach a debugger which will then receive the console output inside its console." ON
|
|
"WIN32" OFF)
|
|
|
|
|
|
set (PROJECT_ARCHITECTURE "${CMAKE_SYSTEM_PROCESSOR}")
|
|
if (NOT PROJECT_ARCHITECTURE)
|
|
# This is supposed to happen already on Windows
|
|
set (PROJECT_ARCHITECTURE "$ENV{PROCESSOR_ARCHITECTURE}")
|
|
endif (NOT PROJECT_ARCHITECTURE)
|
|
message (STATUS "******************************************************")
|
|
message (STATUS "Building for for: ${CMAKE_SYSTEM_NAME}-${PROJECT_ARCHITECTURE}")
|
|
message (STATUS "******************************************************")
|
|
|
|
|
|
#
|
|
# install locations
|
|
#
|
|
set (BIN_DESTINATION bin)
|
|
set (LIB_DESTINATION lib)
|
|
set (INCLUDE_DESTINATION include)
|
|
set (SHARE_DESTINATION share)
|
|
set (DOC_DESTINATION doc/${CMAKE_PROJECT_NAME})
|
|
set (DATA_DESTINATION ${CMAKE_PROJECT_NAME})
|
|
set (MANPAGE_DESTINATION ${SHARE_DESTINATION})
|
|
set (PLUGIN_DESTINATION lib/plugins)
|
|
set (QT_CONF_DESTINATION bin)
|
|
|
|
if (WIN32)
|
|
set (SHARE_DESTINATION bin)
|
|
set (DOC_DESTINATION doc)
|
|
set (DATA_DESTINATION data)
|
|
set (PLUGIN_DESTINATION plugins)
|
|
endif (WIN32)
|
|
|
|
if (APPLE)
|
|
set (BIN_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/MacOS)
|
|
set (SHARE_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
|
|
set (MANPAGE_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
|
|
set (DOC_DESTINATION doc)
|
|
set (DATA_DESTINATION data)
|
|
set (PLUGIN_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/PlugIns)
|
|
set (QT_CONF_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
|
|
endif (APPLE)
|
|
|
|
set (WSJT_BIN_DESTINATION ${BIN_DESTINATION} CACHE PATH "Path for executables")
|
|
set (WSJT_LIB_DESTINATION ${LIB_DESTINATION} CACHE PATH "Path for libraries")
|
|
set (WSJT_INCLUDE_DESTINATION ${INCLUDE_DESTINATION} CACHE PATH "Path for library headers")
|
|
set (WSJT_SHARE_DESTINATION ${SHARE_DESTINATION} CACHE PATH "Path for shared content")
|
|
set (WSJT_DOC_DESTINATION ${DOC_DESTINATION} CACHE PATH "Path for documentation")
|
|
set (WSJT_DATA_DESTINATION ${DATA_DESTINATION} CACHE PATH "Path for shared RO data")
|
|
set (WSJT_MANPAGE_DESTINATION ${MANPAGE_DESTINATION} CACHE PATH "Path for manpages")
|
|
set (WSJT_PLUGIN_DESTINATION ${PLUGIN_DESTINATION} CACHE PATH "Path for plugins")
|
|
set (WSJT_QT_CONF_DESTINATION ${QT_CONF_DESTINATION} CACHE PATH "Path for the qt.conf file")
|
|
|
|
#
|
|
# Project sources
|
|
#
|
|
set (wsjt_qt_CXXSRCS
|
|
qt_helpers.cpp
|
|
MessageBox.cpp
|
|
MetaDataRegistry.cpp
|
|
NetworkServerLookup.cpp
|
|
revision_utils.cpp
|
|
WFPalette.cpp
|
|
Radio.cpp
|
|
RadioMetaType.cpp
|
|
Bands.cpp
|
|
Modes.cpp
|
|
FrequencyList.cpp
|
|
StationList.cpp
|
|
FrequencyLineEdit.cpp
|
|
CandidateKeyFilter.cpp
|
|
ForeignKeyDelegate.cpp
|
|
LiveFrequencyValidator.cpp
|
|
GetUserId.cpp
|
|
TraceFile.cpp
|
|
AudioDevice.cpp
|
|
Transceiver.cpp
|
|
TransceiverBase.cpp
|
|
EmulateSplitTransceiver.cpp
|
|
TransceiverFactory.cpp
|
|
PollingTransceiver.cpp
|
|
HamlibTransceiver.cpp
|
|
HRDTransceiver.cpp
|
|
DXLabSuiteCommanderTransceiver.cpp
|
|
NetworkMessage.cpp
|
|
MessageClient.cpp
|
|
LettersSpinBox.cpp
|
|
HelpTextWindow.cpp
|
|
SampleDownloader.cpp
|
|
SampleDownloader/DirectoryDelegate.cpp
|
|
SampleDownloader/Directory.cpp
|
|
SampleDownloader/FileNode.cpp
|
|
SampleDownloader/RemoteFile.cpp
|
|
DisplayManual.cpp
|
|
MultiSettings.cpp
|
|
MaidenheadLocatorValidator.cpp
|
|
CallsignValidator.cpp
|
|
)
|
|
|
|
set (wsjt_qtmm_CXXSRCS
|
|
Audio/BWFFile.cpp
|
|
)
|
|
|
|
set (jt9_FSRCS
|
|
lib/jt9.f90
|
|
lib/jt9a.f90
|
|
)
|
|
|
|
set (jt9_CXXSRCS
|
|
lib/ipcomm.cpp
|
|
)
|
|
|
|
set (wsjtx_CXXSRCS
|
|
logbook/adif.cpp
|
|
logbook/countrydat.cpp
|
|
logbook/countriesworked.cpp
|
|
logbook/logbook.cpp
|
|
psk_reporter.cpp
|
|
Modulator.cpp
|
|
Detector.cpp
|
|
logqso.cpp
|
|
displaytext.cpp
|
|
decodedtext.cpp
|
|
getfile.cpp
|
|
soundout.cpp
|
|
soundin.cpp
|
|
meterwidget.cpp
|
|
signalmeter.cpp
|
|
plotter.cpp
|
|
widegraph.cpp
|
|
echograph.cpp
|
|
echoplot.cpp
|
|
fastgraph.cpp
|
|
fastplot.cpp
|
|
about.cpp
|
|
astro.cpp
|
|
messageaveraging.cpp
|
|
WsprTxScheduler.cpp
|
|
mainwindow.cpp
|
|
Configuration.cpp
|
|
main.cpp
|
|
wsprnet.cpp
|
|
WSPRBandHopping.cpp
|
|
)
|
|
|
|
if (WIN32)
|
|
set (wsjt_CXXSRCS
|
|
${wsjt_CXXSRCS}
|
|
killbyname.cpp
|
|
)
|
|
|
|
set (wsjt_qt_CXXSRCS
|
|
${wsjt_qt_CXXSRCS}
|
|
OmniRigTransceiver.cpp
|
|
)
|
|
endif (WIN32)
|
|
|
|
set (wsjt_FSRCS
|
|
lib/afc65b.f90
|
|
lib/afc9.f90
|
|
lib/ana932.f90
|
|
lib/analytic.f90
|
|
lib/astro.f90
|
|
lib/astrosub.f90
|
|
lib/astro0.f90
|
|
lib/avecho.f90
|
|
lib/averms.f90
|
|
lib/azdist.f90
|
|
lib/baddata.f90
|
|
lib/ccf2.f90
|
|
lib/ccf65.f90
|
|
lib/chkhist.f90
|
|
lib/chkmsg.f90
|
|
lib/chkss2.f90
|
|
lib/coord.f90
|
|
lib/db.f90
|
|
lib/decode4.f90
|
|
lib/decode65a.f90
|
|
lib/decode65b.f90
|
|
lib/decode9w.f90
|
|
lib/decoder.f90
|
|
lib/deep4.f90
|
|
lib/deg2grid.f90
|
|
lib/degrade_snr.f90
|
|
lib/demod64a.f90
|
|
lib/detectmsk144.f90
|
|
lib/detectmsk32.f90
|
|
lib/determ.f90
|
|
lib/downsam9.f90
|
|
lib/encode232.f90
|
|
lib/encode4.f90
|
|
lib/entail.f90
|
|
lib/ephem.f90
|
|
lib/extract.f90
|
|
lib/extract4.f90
|
|
lib/extractmessage144.f90
|
|
lib/fano232.f90
|
|
lib/fast9.f90
|
|
lib/fast_decode.f90
|
|
lib/fchisq.f90
|
|
lib/fchisq0.f90
|
|
lib/fchisq65.f90
|
|
lib/fftw3mod.f90
|
|
lib/fil3.f90
|
|
lib/fil3c.f90
|
|
lib/fil4.f90
|
|
lib/fil6521.f90
|
|
lib/filbig.f90
|
|
lib/flat1.f90
|
|
lib/flat1a.f90
|
|
lib/flat1b.f90
|
|
lib/flat2.f90
|
|
lib/flat4.f90
|
|
lib/flat65.f90
|
|
lib/fmtmsg.f90
|
|
lib/foldspec9f.f90
|
|
lib/four2a.f90
|
|
lib/fqso_first.f90
|
|
lib/gen4.f90
|
|
lib/gen65.f90
|
|
lib/gen9.f90
|
|
lib/geniscat.f90
|
|
lib/genmsk.f90
|
|
lib/genmsk144.f90
|
|
lib/genmsk32.f90
|
|
lib/genmsk_short.f90
|
|
lib/genqra64.f90
|
|
lib/genwspr.f90
|
|
lib/geodist.f90
|
|
lib/getlags.f90
|
|
lib/getmet4.f90
|
|
lib/graycode.f90
|
|
lib/graycode65.f90
|
|
lib/grayline.f90
|
|
lib/grid2deg.f90
|
|
lib/hash.f90
|
|
lib/hashing.f90
|
|
lib/hint65.f90
|
|
lib/hspec.f90
|
|
lib/indexx.f90
|
|
lib/init_random_seed.f90
|
|
lib/interleave4.f90
|
|
lib/interleave63.f90
|
|
lib/interleave9.f90
|
|
lib/inter_wspr.f90
|
|
lib/iscat.f90
|
|
lib/iso_c_utilities.f90
|
|
lib/jplsubs.f
|
|
lib/jt4.f90
|
|
lib/jt4_decode.f90
|
|
lib/jt65_decode.f90
|
|
lib/jt65_mod.f90
|
|
lib/jt9_decode.f90
|
|
lib/jt9fano.f90
|
|
lib/JTMSKsim.f90
|
|
lib/jtmsk_decode.f90
|
|
lib/jtmsk_short.f90
|
|
lib/ldpcsim.f90
|
|
lib/libration.f90
|
|
lib/lorentzian.f90
|
|
lib/lpf1.f90
|
|
lib/mixlpf.f90
|
|
lib/makepings.f90
|
|
lib/moondopjpl.f90
|
|
lib/morse.f90
|
|
lib/move.f90
|
|
lib/mskdt.f90
|
|
lib/msk144d.f90
|
|
lib/msk144_decode.f90
|
|
lib/msk144sim.f90
|
|
lib/options.f90
|
|
lib/packjt.f90
|
|
lib/pctile.f90
|
|
lib/peakdt9.f90
|
|
lib/peakup.f90
|
|
lib/polyfit.f90
|
|
lib/prog_args.f90
|
|
lib/ps4.f90
|
|
lib/qra64a.f90
|
|
lib/readwav.f90
|
|
lib/rectify_msk.f90
|
|
lib/refspectrum.f90
|
|
lib/savec2.f90
|
|
lib/sec_midn.f90
|
|
lib/setup65.f90
|
|
lib/sh65.f90
|
|
lib/sh65snr.f90
|
|
lib/slasubs.f
|
|
lib/sleep_msec.f90
|
|
lib/slope.f90
|
|
lib/smo.f90
|
|
lib/smo121.f90
|
|
lib/softsym.f90
|
|
lib/softsym9f.f90
|
|
lib/softsym9w.f90
|
|
lib/shell.f90
|
|
lib/spec64.f90
|
|
lib/spec9f.f90
|
|
lib/stdmsg.f90
|
|
lib/subtract65.f90
|
|
lib/sun.f90
|
|
lib/symspec.f90
|
|
lib/symspec2.f90
|
|
lib/symspec65.f90
|
|
lib/sync4.f90
|
|
lib/sync64.f90
|
|
lib/sync65.f90
|
|
lib/sync9.f90
|
|
lib/sync9f.f90
|
|
lib/sync9w.f90
|
|
lib/synciscat.f90
|
|
lib/syncmsk.f90
|
|
lib/timer_C_wrapper.f90
|
|
lib/timer_impl.f90
|
|
lib/timer_module.f90
|
|
lib/timf2.f90
|
|
lib/tweak1.f90
|
|
lib/twkfreq.f90
|
|
lib/twkfreq65.f90
|
|
lib/wav11.f90
|
|
lib/wav12.f90
|
|
lib/wavhdr.f90
|
|
lib/xcor.f90
|
|
lib/xcor4.f90
|
|
lib/wavhdr.f90
|
|
lib/wqencode.f90
|
|
lib/wspr_downsample.f90
|
|
lib/zplot9.f90
|
|
)
|
|
|
|
set (ka9q_CSRCS
|
|
lib/ftrsd/decode_rs.c
|
|
lib/ftrsd/encode_rs.c
|
|
lib/ftrsd/init_rs.c
|
|
)
|
|
set_source_files_properties (${ka9q_CSRCS} PROPERTIES COMPILE_FLAGS -Wno-sign-compare)
|
|
|
|
set (ldpc_CSRCS
|
|
lib/ldpc/alloc.c
|
|
lib/ldpc/rcode.c
|
|
lib/ldpc/dec.c
|
|
lib/ldpc/enc.c
|
|
lib/ldpc/intio.c
|
|
lib/ldpc/blockio.c
|
|
lib/ldpc/check.c
|
|
lib/ldpc/open.c
|
|
lib/ldpc/mod2dense.c
|
|
lib/ldpc/mod2sparse.c
|
|
lib/ldpc/mod2convert.c
|
|
lib/ldpc/distrib.c
|
|
)
|
|
|
|
set (qra_CSRCS
|
|
lib/qra/qra64/qra64.c
|
|
lib/qra/qra64/qra64_subs.c
|
|
lib/qra/qracodes/npfwht.c
|
|
lib/qra/qracodes/pdmath.c
|
|
lib/qra/qracodes/qra12_63_64_irr_b.c
|
|
lib/qra/qracodes/qra13_64_64_irr_e.c
|
|
lib/qra/qracodes/qracodes.c
|
|
)
|
|
|
|
set (wsjt_CSRCS
|
|
${ka9q_CSRCS}
|
|
lib/ftrsd/ftrsd2.c
|
|
lib/sgran.c
|
|
lib/golay24_table.c
|
|
lib/gran.c
|
|
lib/igray.c
|
|
lib/init_random_seed.c
|
|
lib/ldpc32_table.c
|
|
lib/wsprd/nhash.c
|
|
lib/tab.c
|
|
lib/tmoonsub.c
|
|
lib/usleep.c
|
|
lib/vit213.c
|
|
lib/wisdom.c
|
|
lib/wrapkarn.c
|
|
${ldpc_CSRCS}
|
|
${qra_CSRCS}
|
|
)
|
|
|
|
set (wsjt_qt_UISRCS
|
|
wf_palette_design_dialog.ui
|
|
)
|
|
|
|
set (wsprsim_CSRCS
|
|
lib/wsprd/wsprsim.c
|
|
lib/wsprd/wsprsim_utils.c
|
|
lib/wsprd/wsprd_utils.c
|
|
lib/wsprd/fano.c
|
|
lib/wsprd/tab.c
|
|
lib/wsprd/nhash.c
|
|
)
|
|
|
|
set (wsprd_CSRCS
|
|
lib/wsprd/wsprd.c
|
|
lib/wsprd/wsprsim_utils.c
|
|
lib/wsprd/wsprd_utils.c
|
|
lib/wsprd/fano.c
|
|
lib/wsprd/jelinek.c
|
|
lib/wsprd/tab.c
|
|
lib/wsprd/nhash.c
|
|
lib/init_random_seed.c
|
|
)
|
|
|
|
set (wsjtx_UISRCS
|
|
mainwindow.ui
|
|
about.ui
|
|
astro.ui
|
|
echograph.ui
|
|
fastgraph.ui
|
|
messageaveraging.ui
|
|
widegraph.ui
|
|
logqso.ui
|
|
Configuration.ui
|
|
)
|
|
|
|
set (UDP_library_CXXSRCS
|
|
Radio.cpp
|
|
RadioMetaType.cpp
|
|
NetworkMessage.cpp
|
|
MessageServer.cpp
|
|
)
|
|
|
|
set (UDP_library_HEADERS
|
|
Radio.hpp
|
|
MessageServer.hpp
|
|
${PROJECT_BINARY_DIR}/udp_export.h
|
|
)
|
|
|
|
set (message_aggregator_CXXSRCS
|
|
UDPExamples/MessageAggregator.cpp
|
|
UDPExamples/MessageAggregatorMainWindow.cpp
|
|
UDPExamples/DecodesModel.cpp
|
|
UDPExamples/BeaconsModel.cpp
|
|
UDPExamples/ClientWidget.cpp
|
|
)
|
|
|
|
set (message_aggregator_STYLESHEETS
|
|
UDPExamples/qss/default.qss
|
|
)
|
|
|
|
set (all_CXXSRCS
|
|
${wsjt_CXXSRCS}
|
|
${wsjt_qt_CXXSRCS}
|
|
${wsjt_qtmm_CXXSRCS}
|
|
${jt9_CXXSRCS}
|
|
${wsjtx_CXXSRCS}
|
|
)
|
|
|
|
set (all_C_and_CXXSRCS
|
|
${wsjt_CSRCS}
|
|
${wsprsim_CSRCS}
|
|
${wsprd_CSRCS}
|
|
${all_CXXSRCS}
|
|
)
|
|
|
|
set (TOP_LEVEL_RESOURCES
|
|
shortcuts.txt
|
|
mouse_commands.txt
|
|
prefixes.txt
|
|
cty.dat
|
|
icons/Darwin/wsjtx.iconset/icon_128x128.png
|
|
contrib/gpl-v3-logo.svg
|
|
)
|
|
|
|
set (PALETTE_FILES
|
|
Palettes/Banana.pal
|
|
Palettes/Blue1.pal
|
|
Palettes/Blue2.pal
|
|
Palettes/Blue3.pal
|
|
Palettes/Brown.pal
|
|
Palettes/Cyan1.pal
|
|
Palettes/Cyan2.pal
|
|
Palettes/Cyan3.pal
|
|
Palettes/Default.pal
|
|
Palettes/Digipan.pal
|
|
Palettes/Fldigi.pal
|
|
Palettes/Gray1.pal
|
|
Palettes/Gray2.pal
|
|
Palettes/Green1.pal
|
|
Palettes/Green2.pal
|
|
Palettes/Jungle.pal
|
|
Palettes/Linrad.pal
|
|
Palettes/Negative.pal
|
|
Palettes/Orange.pal
|
|
Palettes/Pink.pal
|
|
Palettes/Rainbow.pal
|
|
Palettes/Scope.pal
|
|
Palettes/Sunburst.pal
|
|
Palettes/VK4BDJ.pal
|
|
Palettes/YL2KF.pal
|
|
Palettes/Yellow1.pal
|
|
Palettes/Yellow2.pal
|
|
Palettes/ZL1FZ.pal
|
|
)
|
|
|
|
if (APPLE)
|
|
set (WSJTX_ICON_FILE ${CMAKE_PROJECT_NAME}.icns)
|
|
set (ICONSRCS
|
|
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_16x16.png
|
|
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_16x16@2x.png
|
|
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_32x32.png
|
|
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_32x32@2x.png
|
|
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_128x128.png
|
|
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_128x128@2x.png
|
|
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_256x256.png
|
|
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_256x256@2x.png
|
|
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_512x512.png
|
|
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_512x512@2x.png
|
|
)
|
|
add_custom_command (
|
|
OUTPUT ${WSJTX_ICON_FILE}
|
|
COMMAND iconutil -c icns --output "${CMAKE_BINARY_DIR}/${WSJTX_ICON_FILE}" "${CMAKE_SOURCE_DIR}/icons/Darwin/${CMAKE_PROJECT_NAME}.iconset"
|
|
DEPENDS ${ICONSRCS}
|
|
COMMENT "Building Icons"
|
|
)
|
|
endif (APPLE)
|
|
|
|
set_source_files_properties (${WSJTX_ICON_FILE} PROPERTIES MACOSX_PACKAGE_LOCATION Resources)
|
|
|
|
if (WSJT_QDEBUG_IN_RELEASE)
|
|
# context info in Qt message handler in release configuration
|
|
set_property (DIRECTORY APPEND PROPERTY
|
|
COMPILE_DEFINITIONS $<$<NOT:$<CONFIG:Debug>>:QT_MESSAGELOGCONTEXT>
|
|
)
|
|
else (WSJT_QDEBUG_IN_RELEASE)
|
|
# disable Qt trace and warning messages from release configurations
|
|
set_property (DIRECTORY APPEND PROPERTY
|
|
COMPILE_DEFINITIONS $<$<NOT:$<CONFIG:Debug>>:QT_NO_DEBUG_OUTPUT;QT_NO_WARNING_OUTPUT>
|
|
)
|
|
endif (WSJT_QDEBUG_IN_RELEASE)
|
|
|
|
set_property (SOURCE ${all_C_and_CXXSRCS} APPEND_STRING PROPERTY COMPILE_FLAGS " -include wsjtx_config.h")
|
|
set_property (SOURCE ${all_C_and_CXXSRCS} APPEND PROPERTY OBJECT_DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/wsjtx_config.h)
|
|
|
|
if (WIN32)
|
|
# generate the OmniRig COM interface source
|
|
find_program (DUMPCPP dumpcpp)
|
|
if (DUMPCPP-NOTFOUND)
|
|
message (FATAL_ERROR "dumpcpp tool not found")
|
|
endif (DUMPCPP-NOTFOUND)
|
|
execute_process (
|
|
COMMAND ${DUMPCPP} -getfile {4FE359C5-A58F-459D-BE95-CA559FB4F270}
|
|
OUTPUT_VARIABLE AXSERVER
|
|
OUTPUT_STRIP_TRAILING_WHITESPACE
|
|
)
|
|
string (STRIP "${AXSERVER}" AXSERVER)
|
|
if (NOT AXSERVER)
|
|
message (FATAL_ERROR "You need to install OmniRig on this computer")
|
|
endif (NOT AXSERVER)
|
|
string (REPLACE "\"" "" AXSERVER ${AXSERVER})
|
|
file (TO_CMAKE_PATH ${AXSERVER} AXSERVERSRCS)
|
|
endif (WIN32)
|
|
|
|
|
|
#
|
|
# decide on platform specifc packing and fixing up
|
|
#
|
|
if (APPLE)
|
|
set (WSJTX_BUNDLE_VERSION ${wsjtx_VERSION})
|
|
|
|
# make sure CMAKE_INSTALL_PREFIX ends in /
|
|
string (LENGTH "${CMAKE_INSTALL_PREFIX}" LEN)
|
|
math (EXPR LEN "${LEN} -1" )
|
|
string (SUBSTRING "${CMAKE_INSTALL_PREFIX}" ${LEN} 1 ENDCH)
|
|
if (NOT "${ENDCH}" STREQUAL "/")
|
|
set (CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}/")
|
|
endif ()
|
|
endif (APPLE)
|
|
|
|
|
|
#
|
|
# find some useful tools
|
|
#
|
|
find_program(CTAGS ctags)
|
|
find_program(ETAGS etags)
|
|
|
|
#
|
|
# sub-directories
|
|
#
|
|
add_subdirectory (samples)
|
|
if (WSJT_GENERATE_DOCS)
|
|
add_subdirectory (doc)
|
|
endif (WSJT_GENERATE_DOCS)
|
|
|
|
|
|
#
|
|
# Library building setup
|
|
#
|
|
include (GenerateExportHeader)
|
|
set (CMAKE_CXX_VISIBILITY_PRESET hidden)
|
|
set (CMAKE_C_VISIBILITY_PRESET hidden)
|
|
set (CMAKE_Fortran_VISIBILITY_PRESET hidden)
|
|
set (CMAKE_VISIBILITY_INLINES_HIDDEN ON)
|
|
#set (CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE ON)
|
|
|
|
|
|
#
|
|
# C & C++ setup
|
|
#
|
|
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra")
|
|
|
|
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -Wextra -std=c++11 -fexceptions -frtti")
|
|
|
|
if (NOT APPLE)
|
|
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-pragmas")
|
|
set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -fdata-sections -ffunction-sections")
|
|
set (CMAKE_C_FLAGS_MINSIZEREL "${CMAKE_C_FLAGS_MINSIZEREL} -fdata-sections -ffunction-sections")
|
|
set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -fdata-sections -ffunction-sections")
|
|
set (CMAKE_CXX_FLAGS_MINSIZEREL "${CMAKE_CXX_FLAGS_MINSIZEREL} -fdata-sections -ffunction-sections")
|
|
endif (NOT APPLE)
|
|
|
|
if (WIN32)
|
|
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS}")
|
|
endif (WIN32)
|
|
if (APPLE)
|
|
if (${CMAKE_CXX_COMPILER_ID} STREQUAL "Clang")
|
|
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -stdlib=libc++")
|
|
endif (${CMAKE_CXX_COMPILER_ID} STREQUAL "Clang")
|
|
else (APPLE)
|
|
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -pthread")
|
|
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -pthread")
|
|
endif (APPLE)
|
|
|
|
|
|
#
|
|
# Fortran setup
|
|
#
|
|
set (General_FFLAGS "-Wall -Wno-conversion -fbounds-check -fno-second-underscore")
|
|
|
|
# FFLAGS depend on the compiler
|
|
get_filename_component (Fortran_COMPILER_NAME ${CMAKE_Fortran_COMPILER} NAME)
|
|
|
|
if (Fortran_COMPILER_NAME MATCHES "gfortran.*")
|
|
# gfortran
|
|
|
|
# CMake compiler test is supposed to do this but doesn't yet
|
|
if (CMAKE_OSX_DEPLOYMENT_TARGET)
|
|
set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -mmacosx-version-min=${CMAKE_OSX_DEPLOYMENT_TARGET}")
|
|
endif (CMAKE_OSX_DEPLOYMENT_TARGET)
|
|
if (CMAKE_OSX_SYSROOT)
|
|
set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -isysroot ${CMAKE_OSX_SYSROOT}")
|
|
endif (CMAKE_OSX_SYSROOT)
|
|
|
|
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -funroll-all-loops -fno-f2c ${General_FFLAGS}")
|
|
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -fbounds-check -fno-f2c ${General_FFLAGS}")
|
|
elseif (Fortran_COMPILER_NAME MATCHES "ifort.*")
|
|
# ifort (untested)
|
|
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -f77rtl ${General_FFLAGS}")
|
|
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -f77rtl ${General_FFLAGS}")
|
|
elseif (Fortran_COMPILER_NAME MATCHES "g77")
|
|
# g77
|
|
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -funroll-all-loops -fno-f2c -m32 ${General_FFLAGS}")
|
|
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -fbounds-check -fno-f2c -m32 ${General_FFLAGS}")
|
|
else (Fortran_COMPILER_NAME MATCHES "gfortran.*")
|
|
message ("CMAKE_Fortran_COMPILER full path: " ${CMAKE_Fortran_COMPILER})
|
|
message ("Fortran compiler: " ${Fortran_COMPILER_NAME})
|
|
message ("No optimized Fortran compiler flags are known, we just try -O3...")
|
|
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -O3 ${General_FFLAGS}")
|
|
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -fbounds-check ${General_FFLAGS}")
|
|
endif (Fortran_COMPILER_NAME MATCHES "gfortran.*")
|
|
|
|
|
|
#
|
|
# Linker setup
|
|
#
|
|
if (NOT APPLE)
|
|
set (CMAKE_EXE_LINKER_FLAGS_RELEASE "${CMAKE_EXE_LINKER_FLAGS_RELEASE} -Wl,--gc-sections")
|
|
set (CMAKE_EXE_LINKER_FLAGS_MINSIZEREL "${CMAKE_EXE_LINKER_FLAGS_MINSIZEREL} -Wl,--gc-sections")
|
|
endif (NOT APPLE)
|
|
|
|
|
|
#
|
|
# setup and test Fortran C/C++ interaction
|
|
#
|
|
|
|
include (FortranCInterface)
|
|
FortranCInterface_VERIFY (CXX QUIET)
|
|
FortranCInterface_HEADER (FC.h MACRO_NAMESPACE "FC_" SYMBOL_NAMESPACE "FC_"
|
|
SYMBOLS
|
|
grayline
|
|
)
|
|
|
|
|
|
#
|
|
# sort out pre-requisites
|
|
#
|
|
|
|
#
|
|
# Setup RPATH so that built executable targets will run in both the
|
|
# build tree and the install location without having to set a
|
|
# (DYLD|LD)_LIBRARY_PATH override.
|
|
#
|
|
|
|
# use the full RPATH of the build tree
|
|
set (CMAKE_SKIP_BUILD_RPATH FALSE)
|
|
|
|
# when building, don't use the install RPATH, it will still be used
|
|
# later on in the install phase
|
|
set (CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
|
|
|
|
# set (CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}")
|
|
|
|
# add the automaticaly determined parts of the RPATH which point to
|
|
# directories outside of the build tree to the install RPATH
|
|
set (CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
|
|
|
|
# the RPATH to be used when installing, but only if it's not a system
|
|
# directory
|
|
# list (FIND CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}" isSystemDir)
|
|
# if ("${isSystemDir}" STREQUAL "-1")
|
|
# set (CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}")
|
|
# endif ("${isSystemDir}" STREQUAL "-1")
|
|
|
|
set (QT_NEED_RPATH FALSE)
|
|
if (NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib64" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib64")
|
|
set (QT_NEED_RPATH TRUE)
|
|
endif ()
|
|
|
|
#
|
|
# OpenMP
|
|
#
|
|
find_package (OpenMP)
|
|
|
|
#
|
|
# fftw3 single precision library
|
|
#
|
|
find_package (FFTW3 COMPONENTS double single threads REQUIRED)
|
|
|
|
#
|
|
# libhamlib setup
|
|
#
|
|
set (hamlib_STATIC 1)
|
|
find_package (hamlib 3 REQUIRED)
|
|
find_program (RIGCTL_EXE rigctl)
|
|
find_program (RIGCTLD_EXE rigctld)
|
|
|
|
message (STATUS "hamlib_INCLUDE_DIRS: ${hamlib_INCLUDE_DIRS}")
|
|
message (STATUS "hamlib_LIBRARIES: ${hamlib_LIBRARIES}")
|
|
message (STATUS "hamlib_LIBRARY_DIRS: ${hamlib_LIBRARY_DIRS}")
|
|
|
|
#
|
|
# Qt5 setup
|
|
#
|
|
|
|
# Widgets finds its own dependencies.
|
|
find_package (Qt5Widgets 5 REQUIRED)
|
|
find_package (Qt5Multimedia 5 REQUIRED)
|
|
|
|
if (WIN32)
|
|
add_definitions (-DQT_NEEDS_QTMAIN)
|
|
find_package (Qt5AxContainer REQUIRED)
|
|
endif (WIN32)
|
|
|
|
#
|
|
# stuff only qmake can tell us
|
|
#
|
|
get_target_property (QMAKE_EXECUTABLE Qt5::qmake LOCATION)
|
|
function (QUERY_QMAKE VAR RESULT)
|
|
exec_program (${QMAKE_EXECUTABLE} ARGS "-query ${VAR}" RETURN_VALUE return_code OUTPUT_VARIABLE output)
|
|
if (NOT return_code)
|
|
file (TO_CMAKE_PATH "${output}" output)
|
|
set (${RESULT} ${output} PARENT_SCOPE)
|
|
endif (NOT return_code)
|
|
message (STATUS "Asking qmake for ${RESULT} and got ${output}")
|
|
endfunction (QUERY_QMAKE)
|
|
|
|
query_qmake (QT_INSTALL_PLUGINS QT_PLUGINS_DIR)
|
|
query_qmake (QT_INSTALL_IMPORTS QT_IMPORTS_DIR)
|
|
query_qmake (QT_HOST_DATA QT_DATA_DIR)
|
|
set (QT_MKSPECS_DIR ${QT_DATA_DIR}/mkspecs)
|
|
|
|
# Tell CMake to run moc when necessary
|
|
set (CMAKE_AUTOMOC ON)
|
|
include_directories (${CMAKE_CURRENT_BINARY_DIR})
|
|
|
|
# don't use Qt "keywords" signal, slot, emit in generated files to
|
|
# avoid compatability issue with other libraries
|
|
# ADD_DEFINITIONS (-DQT_NO_KEYWORDS)
|
|
# ADD_DEFINITIONS (-DUNICODE) #as per qmake
|
|
|
|
# As moc files are generated in the binary dir, tell CMake to always
|
|
# look for includes there:
|
|
set (CMAKE_INCLUDE_CURRENT_DIR ON)
|
|
|
|
# project definitions
|
|
add_definitions (-DQT5 -DCMAKE_BUILD -DBIGSYM=1)
|
|
if (CMAKE_HOST_UNIX)
|
|
add_definitions (-DUNIX)
|
|
elseif (CMAKE_HOST_WIN32)
|
|
add_definitions (-DWIN32)
|
|
endif ()
|
|
|
|
#
|
|
# source navigation
|
|
#
|
|
set (sources
|
|
${CMAKE_SOURCE_DIR}/*
|
|
${CMAKE_SOURCE_DIR}/logbook/*
|
|
${CMAKE_SOURCE_DIR}/lib/*
|
|
)
|
|
add_custom_target (ctags COMMAND ${CTAGS} -o ${CMAKE_SOURCE_DIR}/tags -R ${sources})
|
|
add_custom_target (etags COMMAND ${ETAGS} -o ${CMAKE_SOURCE_DIR}/TAGS -R ${sources})
|
|
|
|
|
|
# embedded resources
|
|
function (add_resources resources path)
|
|
foreach (resource_file_ ${ARGN})
|
|
get_filename_component (name_ ${resource_file_} NAME)
|
|
file (TO_NATIVE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/${resource_file_} source_)
|
|
file (TO_NATIVE_PATH ${path}/${name_} dest_)
|
|
set (resources_ "${resources_}\n <file alias=\"${dest_}\">${source_}</file>")
|
|
set (${resources} ${${resources}}${resources_} PARENT_SCOPE)
|
|
endforeach (resource_file_ ${ARGN})
|
|
endfunction (add_resources resources path)
|
|
|
|
add_resources (wsjtx_RESOURCES "" ${TOP_LEVEL_RESOURCES})
|
|
add_resources (wsjtx_RESOURCES /Palettes ${PALETTE_FILES})
|
|
|
|
configure_file (wsjtx.qrc.in wsjtx.qrc @ONLY)
|
|
|
|
|
|
# UI generation
|
|
qt5_wrap_ui (wsjt_qt_GENUISRCS ${wsjt_qt_UISRCS})
|
|
qt5_wrap_ui (wsjtx_GENUISRCS ${wsjtx_UISRCS})
|
|
|
|
# Resource generation
|
|
qt5_add_resources (wsjtx_RESOURCES_RCC ${CMAKE_BINARY_DIR}/wsjtx.qrc)
|
|
|
|
# AX COM servers
|
|
if (WIN32)
|
|
include (QtAxMacros)
|
|
wrap_ax_server (GENAXSRCS ${AXSERVERSRCS})
|
|
endif (WIN32)
|
|
|
|
|
|
#
|
|
# targets
|
|
#
|
|
|
|
# build a library of package functionality (without and optionally with OpenMP support)
|
|
add_library (wsjt_cxx STATIC ${wsjt_CSRCS} ${wsjt_CXXSRCS})
|
|
|
|
# build an OpenMP variant of the Fortran library routines
|
|
add_library (wsjt_fort STATIC ${wsjt_FSRCS})
|
|
target_link_libraries (wsjt_fort ${FFTW3_LIBRARIES})
|
|
if (${OPENMP_FOUND} OR APPLE)
|
|
add_library (wsjt_fort_omp STATIC ${wsjt_FSRCS})
|
|
target_link_libraries (wsjt_fort_omp ${FFTW3_LIBRARIES})
|
|
set_target_properties (wsjt_fort_omp
|
|
PROPERTIES
|
|
COMPILE_FLAGS "${OpenMP_C_FLAGS}"
|
|
Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp
|
|
)
|
|
file (MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp)
|
|
if (APPLE)
|
|
# On Mac we don't have working OpenMP support in the C/C++
|
|
# compilers so we have to manually set the correct flags to get
|
|
# OpenMP support in jt9.
|
|
target_compile_options (wsjt_fort_omp
|
|
PRIVATE
|
|
$<$<COMPILE_LANGUAGE:Fortran>:-fopenmp> # assumes GNU style Fortran compiler
|
|
)
|
|
endif (APPLE)
|
|
endif (${OPENMP_FOUND} OR APPLE)
|
|
|
|
# build a library of package Qt functionality
|
|
add_library (wsjt_qt STATIC ${wsjt_qt_CXXSRCS} ${wsjt_qt_GENUISRCS} ${GENAXSRCS})
|
|
# set wsjtx_udp exports to static variants
|
|
target_compile_definitions (wsjt_qt PUBLIC UDP_STATIC_DEFINE)
|
|
target_link_libraries (wsjt_qt Qt5::Widgets Qt5::Network)
|
|
target_include_directories (wsjt_qt BEFORE PRIVATE ${hamlib_INCLUDE_DIRS})
|
|
if (WIN32)
|
|
target_link_libraries (wsjt_qt Qt5::AxContainer Qt5::AxBase)
|
|
endif (WIN32)
|
|
|
|
add_library (wsjt_qtmm STATIC ${wsjt_qtmm_CXXSRCS} ${wsjt_qtmm_GENUISRCS})
|
|
target_link_libraries (wsjt_qtmm Qt5::Multimedia)
|
|
|
|
add_executable (jt4sim lib/jt4sim.f90 wsjtx.rc)
|
|
target_link_libraries (jt4sim wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (jt65sim lib/jt65sim.f90 wsjtx.rc)
|
|
target_link_libraries (jt65sim wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (qra64sim lib/qra/qra64/qra64sim.f90 wsjtx.rc)
|
|
target_link_libraries (qra64sim wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (jt9sim lib/jt9sim.f90 wsjtx.rc)
|
|
target_link_libraries (jt9sim wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (jt65code lib/jt65code.f90 wsjtx.rc)
|
|
target_link_libraries (jt65code wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (qra64code lib/qra64code.f90 wsjtx.rc)
|
|
target_link_libraries (qra64code wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (jt9code lib/jt9code.f90 wsjtx.rc)
|
|
target_link_libraries (jt9code wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (wsprd ${wsprd_CSRCS})
|
|
target_include_directories (wsprd PRIVATE ${FFTW3_INCLUDE_DIRS})
|
|
target_link_libraries (wsprd ${FFTW3_LIBRARIES})
|
|
|
|
add_executable (wsprsim ${wsprsim_CSRCS})
|
|
|
|
add_executable (jt4code lib/jt4code.f90 wsjtx.rc)
|
|
target_link_libraries (jt4code wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (jt65 lib/jt65.f90 lib/jt65_test.f90 wsjtx.rc)
|
|
target_link_libraries (jt65 wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (ldpcsim lib/ldpcsim.f90 wsjtx.rc)
|
|
target_link_libraries (ldpcsim wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (JTMSKsim lib/JTMSKsim.f90 wsjtx.rc)
|
|
target_link_libraries (JTMSKsim wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (msk144sim lib/msk144sim.f90 wsjtx.rc)
|
|
target_link_libraries (msk144sim wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (msk144d lib/msk144d.f90 wsjtx.rc)
|
|
target_link_libraries (msk144d wsjt_fort wsjt_cxx)
|
|
|
|
add_executable (jt9 ${jt9_FSRCS} ${jt9_CXXSRCS} wsjtx.rc)
|
|
if (${OPENMP_FOUND} OR APPLE)
|
|
if (APPLE)
|
|
# On Mac we don't have working OpenMP support in the C/C++
|
|
# compilers so we have to manually set the correct linking flags
|
|
# and libraries to get OpenMP support in jt9.
|
|
set_target_properties (jt9
|
|
PROPERTIES
|
|
Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp
|
|
LINK_LIBRARIES "gomp;gcc_s.1" # assume GNU libgcc OpenMP
|
|
)
|
|
target_compile_options (jt9
|
|
PRIVATE
|
|
$<$<COMPILE_LANGUAGE:Fortran>:-fopenmp> # assumes GNU style Fortran compiler
|
|
)
|
|
else (APPLE)
|
|
set_target_properties (jt9
|
|
PROPERTIES
|
|
COMPILE_FLAGS "${OpenMP_C_FLAGS}"
|
|
LINK_FLAGS "${OpenMP_C_FLAGS}"
|
|
Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp
|
|
)
|
|
endif (APPLE)
|
|
target_link_libraries (jt9 wsjt_fort_omp wsjt_cxx Qt5::Core)
|
|
else (${OPENMP_FOUND} OR APPLE)
|
|
target_link_libraries (jt9 wsjt_fort wsjt_cxx Qt5::Core)
|
|
endif (${OPENMP_FOUND} OR APPLE)
|
|
|
|
# build the main application
|
|
add_executable (wsjtx MACOSX_BUNDLE
|
|
${wsjtx_CXXSRCS}
|
|
${wsjtx_GENUISRCS}
|
|
wsjtx.rc
|
|
${WSJTX_ICON_FILE}
|
|
${wsjtx_RESOURCES_RCC}
|
|
)
|
|
|
|
if (WSJT_CREATE_WINMAIN)
|
|
set_target_properties (wsjtx PROPERTIES WIN32_EXECUTABLE ON)
|
|
endif (WSJT_CREATE_WINMAIN)
|
|
|
|
set_target_properties (wsjtx PROPERTIES
|
|
MACOSX_BUNDLE_INFO_STRING "${WSJTX_DESCRIPTION_SUMMARY}"
|
|
MACOSX_BUNDLE_ICON_FILE "${WSJTX_ICON_FILE}"
|
|
MACOSX_BUNDLE_BUNDLE_VERSION ${wsjtx_VERSION}
|
|
MACOSX_BUNDLE_SHORT_VERSION_STRING "v${wsjtx_VERSION}"
|
|
MACOSX_BUNDLE_LONG_VERSION_STRING "Version ${wsjtx_VERSION}"
|
|
MACOSX_BUNDLE_BUNDLE_NAME "${PROJECT_NAME}"
|
|
MACOSX_BUNDLE_COPYRIGHT "${PROJECT_COPYRIGHT}"
|
|
MACOSX_BUNDLE_GUI_IDENTIFIER "org.k1jt.wsjtx"
|
|
)
|
|
|
|
target_include_directories (wsjtx PRIVATE ${FFTW3_INCLUDE_DIRS})
|
|
target_link_libraries (wsjtx wsjt_fort wsjt_cxx wsjt_qt wsjt_qtmm ${hamlib_LIBRARIES} ${FFTW3_LIBRARIES})
|
|
qt5_use_modules (wsjtx SerialPort) # not sure why the interface link library syntax above doesn't work
|
|
|
|
# make a library for WSJT-X UDP servers
|
|
add_library (wsjtx_udp SHARED ${UDP_library_CXXSRCS})
|
|
add_library (wsjtx_udp-static STATIC ${UDP_library_CXXSRCS})
|
|
target_include_directories (wsjtx_udp
|
|
INTERFACE
|
|
$<INSTALL_INTERFACE:${WSJT_INCLUDE_DESTINATION}/wsjtx>
|
|
)
|
|
target_include_directories (wsjtx_udp-static
|
|
INTERFACE
|
|
$<INSTALL_INTERFACE:${WSJT_INCLUDE_DESTINATION}/wsjtx>
|
|
)
|
|
set_target_properties (wsjtx_udp PROPERTIES
|
|
PUBLIC_HEADER "${UDP_library_HEADERS}"
|
|
)
|
|
set_target_properties (wsjtx_udp-static PROPERTIES
|
|
OUTPUT_NAME wsjtx_udp
|
|
)
|
|
target_compile_definitions (wsjtx_udp-static PUBLIC UDP_STATIC_DEFINE)
|
|
qt5_use_modules (wsjtx_udp Network)
|
|
qt5_use_modules (wsjtx_udp-static Network)
|
|
generate_export_header (wsjtx_udp BASE_NAME udp)
|
|
|
|
add_executable (udp_daemon UDPExamples/UDPDaemon.cpp UDPExamples/udp_daemon.rc ${WSJTX_ICON_FILE})
|
|
target_link_libraries (udp_daemon wsjtx_udp)
|
|
|
|
add_resources (message_aggregator_RESOURCES /qss ${message_aggregator_STYLESHEETS})
|
|
configure_file (UDPExamples/message_aggregator.qrc.in message_aggregator.qrc @ONLY)
|
|
qt5_add_resources (message_aggregator_RESOURCES_RCC ${CMAKE_CURRENT_BINARY_DIR}/message_aggregator.qrc)
|
|
add_executable (message_aggregator
|
|
${message_aggregator_CXXSRCS}
|
|
${WSJTX_ICON_FILE}
|
|
UDPExamples/message_aggregator.rc
|
|
${message_aggregator_RESOURCES_RCC}
|
|
)
|
|
target_link_libraries (message_aggregator Qt5::Widgets wsjtx_udp)
|
|
|
|
if (WSJT_CREATE_WINMAIN)
|
|
set_target_properties (message_aggregator PROPERTIES WIN32_EXECUTABLE ON)
|
|
endif (WSJT_CREATE_WINMAIN)
|
|
|
|
if (UNIX)
|
|
if (NOT WSJT_SKIP_MANPAGES)
|
|
add_subdirectory (manpages)
|
|
add_dependencies (wsjtx manpages)
|
|
endif (NOT WSJT_SKIP_MANPAGES)
|
|
if (NOT APPLE)
|
|
add_subdirectory (debian)
|
|
add_dependencies (wsjtx debian)
|
|
endif (NOT APPLE)
|
|
endif (UNIX)
|
|
|
|
#
|
|
# installation
|
|
#
|
|
install (TARGETS wsjtx
|
|
RUNTIME DESTINATION ${WSJT_BIN_DESTINATION} COMPONENT runtime
|
|
BUNDLE DESTINATION . COMPONENT runtime
|
|
)
|
|
|
|
install (TARGETS wsjtx_udp EXPORT udp
|
|
RUNTIME DESTINATION ${WSJT_BIN_DESTINATION}
|
|
LIBRARY DESTINATION ${WSJT_LIB_DESTINATION}
|
|
ARCHIVE DESTINATION ${WSJT_LIB_DESTINATION}
|
|
PUBLIC_HEADER DESTINATION ${WSJT_INCLUDE_DESTINATION}/wsjtx
|
|
)
|
|
install (TARGETS wsjtx_udp-static EXPORT udp-static
|
|
DESTINATION ${WSJT_LIB_DESTINATION}
|
|
)
|
|
|
|
install (EXPORT udp NAMESPACE wsjtx::
|
|
DESTINATION ${WSJT_LIB_DESTINATION}/cmake/wsjtx
|
|
)
|
|
install (EXPORT udp-static NAMESPACE wsjtx::
|
|
DESTINATION ${WSJT_LIB_DESTINATION}/cmake/wsjtx
|
|
)
|
|
|
|
install (TARGETS udp_daemon message_aggregator
|
|
RUNTIME DESTINATION ${WSJT_BIN_DESTINATION} COMPONENT runtime
|
|
BUNDLE DESTINATION ${WSJT_BIN_DESTINATION} COMPONENT runtime
|
|
)
|
|
|
|
install (TARGETS jt9 jt65code qra64code qra64sim jt9code jt4code wsprd
|
|
RUNTIME DESTINATION ${WSJT_BIN_DESTINATION} COMPONENT runtime
|
|
BUNDLE DESTINATION ${WSJT_BIN_DESTINATION} COMPONENT runtime
|
|
)
|
|
|
|
install (PROGRAMS
|
|
${RIGCTL_EXE}
|
|
DESTINATION ${WSJT_BIN_DESTINATION}
|
|
#COMPONENT runtime
|
|
RENAME rigctl-wsjtx${CMAKE_EXECUTABLE_SUFFIX}
|
|
)
|
|
|
|
install (PROGRAMS
|
|
${RIGCTLD_EXE}
|
|
DESTINATION ${WSJT_BIN_DESTINATION}
|
|
#COMPONENT runtime
|
|
RENAME rigctld-wsjtx${CMAKE_EXECUTABLE_SUFFIX}
|
|
)
|
|
|
|
install (FILES
|
|
README
|
|
COPYING
|
|
AUTHORS
|
|
THANKS
|
|
NEWS
|
|
INSTALL
|
|
BUGS
|
|
DESTINATION ${WSJT_SHARE_DESTINATION}/${WSJT_DOC_DESTINATION}
|
|
#COMPONENT runtime
|
|
)
|
|
|
|
install (FILES
|
|
contrib/Ephemeris/JPLEPH
|
|
contrib/LDPC/peg-128-80-reg3.gen
|
|
contrib/LDPC/peg-128-80-reg3.pchk
|
|
DESTINATION ${WSJT_SHARE_DESTINATION}/${WSJT_DATA_DESTINATION}
|
|
#COMPONENT runtime
|
|
)
|
|
|
|
#
|
|
# Mac installer files
|
|
#
|
|
if (APPLE)
|
|
install (FILES
|
|
Darwin/ReadMe.txt
|
|
Darwin/sysctl.conf
|
|
DESTINATION .
|
|
#COMPONENT runtime
|
|
)
|
|
endif (APPLE)
|
|
|
|
|
|
#
|
|
# uninstall support
|
|
#
|
|
configure_file (
|
|
"${CMAKE_CURRENT_SOURCE_DIR}/CMake/cmake_uninstall.cmake.in"
|
|
"${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
|
|
@ONLY)
|
|
add_custom_target (uninstall
|
|
"${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake")
|
|
|
|
|
|
# creates svnversion.h using cmake script
|
|
add_custom_target (revisiontag
|
|
COMMAND ${CMAKE_COMMAND} -D SOURCE_DIR=${CMAKE_CURRENT_SOURCE_DIR} -D OUTPUT_DIR=${PROJECT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/CMake/getsvn.cmake
|
|
COMMENT "Generating Subversion revision information"
|
|
VERBATIM
|
|
)
|
|
# explicitly say that the wsjt_qt depends on custom target, this is
|
|
# done indirectly so that the revisiontag target gets built exactly
|
|
# once per build
|
|
add_dependencies(wsjt_qt revisiontag)
|
|
|
|
|
|
#
|
|
# versioning and configuration
|
|
#
|
|
configure_file (
|
|
"${CMAKE_CURRENT_SOURCE_DIR}/wsjtx_config.h.in"
|
|
"${CMAKE_CURRENT_BINARY_DIR}/wsjtx_config.h"
|
|
)
|
|
|
|
|
|
if (NOT WIN32 AND NOT APPLE)
|
|
# install a desktop file so wsjtx appears in the application start
|
|
# menu with an icon
|
|
install (
|
|
FILES wsjtx.desktop message_aggregator.desktop
|
|
DESTINATION share/applications
|
|
#COMPONENT runtime
|
|
)
|
|
install (
|
|
FILES icons/Unix/wsjtx_icon.png
|
|
DESTINATION share/pixmaps
|
|
#COMPONENT runtime
|
|
)
|
|
endif (NOT WIN32 AND NOT APPLE)
|
|
|
|
|
|
#
|
|
# bundle fixup only done in Release or MinSizeRel configurations
|
|
#
|
|
if (NOT is_debug_build)
|
|
|
|
get_target_property (QtCore_location Qt5::Core LOCATION)
|
|
get_filename_component (QtCore_location ${QtCore_location} PATH)
|
|
list (APPEND fixup_library_dirs ${QtCore_location})
|
|
|
|
if (APPLE)
|
|
set (CMAKE_POSTFLIGHT_SCRIPT
|
|
"${wsjtx_BINARY_DIR}/postflight.sh")
|
|
set (CMAKE_POSTUPGRADE_SCRIPT
|
|
"${wsjtx_BINARY_DIR}/postupgrade.sh")
|
|
configure_file ("${wsjtx_SOURCE_DIR}/Darwin/postflight.sh.in"
|
|
"${CMAKE_POSTFLIGHT_SCRIPT}")
|
|
configure_file ("${wsjtx_SOURCE_DIR}/Darwin/postupgrade.sh.in"
|
|
"${CMAKE_POSTUPGRADE_SCRIPT}")
|
|
endif ()
|
|
|
|
if (APPLE OR WIN32)
|
|
# install rules for including 3rd party libs such as Qt
|
|
|
|
# install a qt.conf file
|
|
install (CODE "
|
|
get_filename_component (the_qt_conf \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\" REALPATH)
|
|
file (WRITE \"\${the_qt_conf}\"
|
|
\"[Paths]
|
|
\")
|
|
"
|
|
#COMPONENT runtime
|
|
)
|
|
|
|
# if a system Qt is used (e.g. installed in /usr/lib/), it will not be included in the installation
|
|
set (fixup_exe "\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_BIN_DESTINATION}/${CMAKE_PROJECT_NAME}${CMAKE_EXECUTABLE_SUFFIX}")
|
|
|
|
#get_filename_component (hamlib_lib_dir ${hamlib_LIBRARIES} PATH)
|
|
|
|
if (APPLE)
|
|
# install required Qt plugins
|
|
install (
|
|
DIRECTORY
|
|
${QT_PLUGINS_DIR}/platforms
|
|
${QT_PLUGINS_DIR}/audio
|
|
${QT_PLUGINS_DIR}/accessible
|
|
${QT_PLUGINS_DIR}/imageformats
|
|
DESTINATION ${WSJT_PLUGIN_DESTINATION}
|
|
CONFIGURATIONS Release MinSizeRel
|
|
#COMPONENT runtime
|
|
FILES_MATCHING PATTERN "*${CMAKE_SHARED_LIBRARY_SUFFIX}"
|
|
PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
PATTERN "*quick*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
PATTERN "*_debug${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
)
|
|
# install (
|
|
# DIRECTORY
|
|
# ${QT_PLUGINS_DIR}/platforms
|
|
# ${QT_PLUGINS_DIR}/audio
|
|
# ${QT_PLUGINS_DIR}/accessible
|
|
# DESTINATION ${WSJT_PLUGIN_DESTINATION}
|
|
# CONFIGURATIONS Debug
|
|
# #COMPONENT runtime
|
|
# FILES_MATCHING PATTERN "*_debug${CMAKE_SHARED_LIBRARY_SUFFIX}"
|
|
# PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
# PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
# PATTERN "*quick*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
# )
|
|
|
|
# add plugins path for Mac Bundle
|
|
install (CODE "
|
|
get_filename_component (the_qt_conf \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\" REALPATH)
|
|
file (APPEND \"\${the_qt_conf}\"
|
|
\"Plugins = PlugIns
|
|
\")
|
|
"
|
|
#COMPONENT runtime
|
|
)
|
|
endif (APPLE)
|
|
|
|
if (WIN32)
|
|
# DLL directory
|
|
#set (hamlib_lib_dir ${hamlib_lib_dir}/../bin)
|
|
|
|
get_filename_component (fftw_lib_dir ${FFTW3F_LIBRARY} PATH)
|
|
list (APPEND fixup_library_dirs ${fftw_lib_dir})
|
|
|
|
# install required Qt plugins
|
|
install (
|
|
DIRECTORY
|
|
${QT_PLUGINS_DIR}/platforms
|
|
${QT_PLUGINS_DIR}/accessible
|
|
${QT_PLUGINS_DIR}/audio
|
|
${QT_PLUGINS_DIR}/imageformats
|
|
DESTINATION ${WSJT_PLUGIN_DESTINATION}
|
|
CONFIGURATIONS Release MinSizeRel
|
|
#COMPONENT runtime
|
|
FILES_MATCHING PATTERN "*${CMAKE_SHARED_LIBRARY_SUFFIX}"
|
|
PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
PATTERN "*quick*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
PATTERN "*d${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
)
|
|
# install (
|
|
# DIRECTORY
|
|
# ${QT_PLUGINS_DIR}/platforms
|
|
# ${QT_PLUGINS_DIR}/accessible
|
|
# ${QT_PLUGINS_DIR}/audio
|
|
# DESTINATION ${WSJT_PLUGIN_DESTINATION}
|
|
# CONFIGURATIONS Debug
|
|
# #COMPONENT runtime
|
|
# FILES_MATCHING PATTERN "*d${CMAKE_SHARED_LIBRARY_SUFFIX}"
|
|
# PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
# PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
# PATTERN "*quick*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
|
|
# )
|
|
|
|
# add plugins path for WIN32
|
|
file (RELATIVE_PATH _plugins_path "${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}" "${CMAKE_INSTALL_PREFIX}/${WSJT_PLUGIN_DESTINATION}")
|
|
install (CODE "
|
|
get_filename_component (the_qt_conf \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\" REALPATH)
|
|
file (APPEND \"\${the_qt_conf}\"
|
|
\"Plugins = ${_plugins_path}
|
|
\")
|
|
"
|
|
#COMPONENT runtime
|
|
)
|
|
|
|
set (gp_tool "objdump") # we want MinGW tool - not MSVC (See GetPrerequisites.cmake)
|
|
endif (WIN32)
|
|
|
|
#list (APPEND fixup_library_dirs ${hamlib_lib_dir})
|
|
list (APPEND fixup_library_dirs ${hamlib_LIBRARY_DIRS})
|
|
|
|
install (CODE "
|
|
get_filename_component (the_path \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_PLUGIN_DESTINATION}\" REALPATH)
|
|
file (GLOB_RECURSE QTPLUGINS \"\${the_path}/*${CMAKE_SHARED_LIBRARY_SUFFIX}\")
|
|
set (CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/CMake/Modules ${CMAKE_MODULE_PATH})
|
|
include (BundleUtilities)
|
|
set (BU_CHMOD_BUNDLE_ITEMS ON)
|
|
set (gp_tool ${gp_tool})
|
|
# canonicalize path in install context
|
|
get_filename_component (the_exe ${fixup_exe} REALPATH)
|
|
fixup_bundle (\"\${the_exe}\" \"\${QTPLUGINS}\" \"${fixup_library_dirs}\")"
|
|
#COMPONENT runtime
|
|
)
|
|
endif (APPLE OR WIN32)
|
|
|
|
endif (NOT is_debug_build)
|
|
|
|
|
|
#
|
|
# packaging
|
|
#
|
|
set (CPACK_MONOLITHIC_INSTALL 1)
|
|
set (CPACK_PACKAGE_NAME "${CMAKE_PROJECT_NAME}")
|
|
set (CPACK_PACKAGE_VERSION_MAJOR ${WSJTX_VERSION_MAJOR})
|
|
set (CPACK_PACKAGE_VERSION_MINOR ${WSJTX_VERSION_MINOR})
|
|
set (CPACK_PACKAGE_VERSION_PATCH ${WSJTX_VERSION_PATCH})
|
|
|
|
if (WIN32)
|
|
set (CPACK_GENERATOR "NSIS")
|
|
elseif (APPLE)
|
|
set (CPACK_GENERATOR "DragNDrop")
|
|
else ()
|
|
find_program (DPKG_BUILDER dpkg-buildpackage DOC "Debian package builder")
|
|
if (DPKG_BUILDER)
|
|
#
|
|
# Derive the correct filename for a Debian package because the DEB
|
|
# generator doesn't do this correctly at present.
|
|
#
|
|
find_program (DPKG_PROGRAM dpkg DOC "dpkg program of Debian-based systems")
|
|
if (DPKG_PROGRAM)
|
|
execute_process (
|
|
COMMAND ${DPKG_PROGRAM} --print-architecture
|
|
OUTPUT_VARIABLE CPACK_DEBIAN_PACKAGE_ARCHITECTURE
|
|
OUTPUT_STRIP_TRAILING_WHITESPACE
|
|
)
|
|
else (DPKG_PROGRAM)
|
|
set (CPACK_DEBIAN_PACKAGE_ARCHITECTURE noarch)
|
|
endif (DPKG_PROGRAM)
|
|
|
|
list (APPEND CPACK_GENERATOR "DEB")
|
|
endif (DPKG_BUILDER)
|
|
|
|
find_program (RPMBUILDER rpmbuild DOC "RPM package builder")
|
|
if (RPMBUILDER)
|
|
list (APPEND CPACK_GENERATOR "RPM")
|
|
endif (RPMBUILDER)
|
|
endif ()
|
|
|
|
set (CPACK_DEBIAN_PACKAGE_DESCRIPTION "${PROJECT_DESCRIPTION}")
|
|
set (CPACK_DEBIAN_PACKAGE_HOMEPAGE "${PROJECT_HOMEPAGE}")
|
|
set (CPACK_DEBIAN_PACKAGE_DEPENDS "libgfortran3 (>=4.8.2), libqt5serialport5 (>=5.2), libqt5multimedia5-plugins (>=5.2), libqt5widgets5 (>=5.2), libusb-1.0-0, libudev1, libc6 (>=2.19)")
|
|
set (CPACK_DEBIAN_PACKAGE_SHLIBDEPS ON)
|
|
|
|
set (CPACK_RPM_PACKAGE_ARCHITECTURE ${CMAKE_SYSTEM_PROCESSOR})
|
|
set (CPACK_RPM_PACKAGE_REQUIRES "qt5-qtserialport >= 5.2, qt5-qtmultimedia >= 5.2, libusb-1.0, libudev, glibc >= 2, libgfortran >= 4.8.2")
|
|
set (CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION /usr/share/pixmaps /usr/share/applications /usr/share/man /usr/share/man1)
|
|
|
|
configure_file ("${PROJECT_SOURCE_DIR}/CMakeCPackOptions.cmake.in"
|
|
"${PROJECT_BINARY_DIR}/CMakeCPackOptions.cmake" @ONLY)
|
|
set (CPACK_PROJECT_CONFIG_FILE "${PROJECT_BINARY_DIR}/CMakeCPackOptions.cmake")
|
|
|
|
include (CPack)
|