mirror of
https://github.com/saitohirga/WSJT-X.git
synced 2024-11-15 16:42:12 -05:00
23aff84fbb
* Moved doc/source/*.txt to AsciiDoc ext source/*.adoc - Correctly identifies AsciiDoc files * wsjtx-main.adoc - Updated links and include:: for *.adoc name change * Added and updated rig-config-* files. * Added inital draft of quick-reference.adoc * build-doc.sh - Updated the script to build new files and .adoc name change * Removed: - yaesu.txt rigtemplate.txt rig-configuration.txt git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3662 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
52 lines
2.3 KiB
Plaintext
52 lines
2.3 KiB
Plaintext
// Status=review
|
||
- To gain some feeling for the controls you will use when making QSOs, try
|
||
clicking with the mouse on the decoded text lines and on the waterfall spectral
|
||
display. You should be able to confirm the following behavior:
|
||
|
||
- Double-click on either of the decoded lines highlighted in green. This action
|
||
should produce the following:
|
||
|
||
** Copies call-sign and locater of a station calling CQ to the “DX Call”
|
||
and “DX grid” entry fields.
|
||
|
||
** Generates suitable messages for a minimal QSO and checks or clears the Tx
|
||
even box so that you will transmit in the proper (odd or even) minutes.
|
||
|
||
** Rx and Tx frequency markers will be moved to the CQ-ing station’s frequency,
|
||
and the Gen Msg (“generated message”) radio button at bottom right of the main
|
||
window will be selected.
|
||
|
||
** If you had checked “Double-click on call sets Tx Enable” on the Setup menu,
|
||
Enable Tx would also be activated, and you would start to transmit automatically,
|
||
at the appropriate time.
|
||
|
||
- Double-click on the decoded line with the message “K1JT N5KDV EM41”,
|
||
highlighted in [red]*RED*.
|
||
|
||
- Results will be similar to (a), except the Tx frequency ([red]*RED* marker) is
|
||
not moved. Such messages are usually in response to your own CQ, or from a
|
||
tail-ender, and you probably want your Tx frequency to stay where it was.
|
||
|
||
- By holding down the Ctrl key when double-clicking on the decoded line
|
||
(or checking Lock Tx=Rx) you can cause both Tx and Rx frequencies to be moved.
|
||
|
||
- Double-click on the message from KF4RWA in either window. He is
|
||
sending “73” to K1JT, signifying that the QSO is over. Most likely you
|
||
want to send 73 to him, so the message “KF4RWA K1JT 73” is automatically
|
||
generated and selected for your next transmission. (Alternatively, you might
|
||
choose to send a free text message or to call CQ again.)
|
||
|
||
- Clicking on the waterfall moves the Rx frequency ([green]*GREEN* marker) to the
|
||
selected frequency.
|
||
|
||
- Ctrl-click on waterfall moves both Rx and Tx frequencies.
|
||
|
||
- Double-click on the waterfall moves the Rx frequency and causes a
|
||
narrow-band decode there at the new QSO frequency. Decoded text appears in the
|
||
right window only. Ctrl-double-click moves both Rx and Tx frequencies and
|
||
decodes at the new frequency.
|
||
|
||
- Clicking Erase clears the right window. Double-click on Erase to clear both
|
||
text windows.
|
||
|