WSJT-X/lib/ft4/ft4sim_mult.f90

104 lines
3.1 KiB
Fortran

program ft4sim_mult
! Generate simulated signals for experimental "FT4" mode
use wavhdr
use packjt77
include 'ft4_params.f90' !FT4 protocol constants
parameter (NWAVE=NN*NSPS)
parameter (NZZ=15*12000) !Length of .wav file, 180,000 i*2 samples
type(hdr) h !Header for .wav file
character arg*12,fname*17,cjunk*4
character msg37*37,msgsent37*37,c77*77
real wave0((NN+2)*NSPS)
real wave(NZZ)
real tmp(NZZ)
integer itone(NN)
integer*2 iwave(NZZ) !Generated full-length waveform
integer icos4(4)
data icos4/0,1,3,2/
! Get command-line argument(s)
nargs=iargc()
if(nargs.ne.2) then
print*,'Usage: ft4sim nsigs nfiles'
print*,'Example: ft4sim 20 8 '
go to 999
endif
call getarg(1,arg)
read(arg,*) nsigs !Number of signals
call getarg(2,arg)
read(arg,*) nfiles !Number of files
twopi=8.0*atan(1.0)
fs=12000.0 !Sample rate (Hz)
dt=1.0/fs !Sample interval (s)
hmod=1.0 !Modulation index (0.5 is MSK, 1.0 is FSK)
tt=NSPS*dt !Duration of unsmoothed symbols (s)
baud=1.0/tt !Keying rate (baud)
txt=NZ*dt !Transmission length (s) without ramp up/down
bandwidth_ratio=2500.0/(fs/2.0)
txt=NN*NSPS/12000.0
xdtmax=10.0 - 0.086
open(10,file='messages.txt',status='old',err=998)
do ifile=1,nfiles
1 read(10,1001,end=999) cjunk,n
1001 format(a4,i2)
if(cjunk.ne.'File' .or. n.ne.ifile) go to 1
wave=0.
write(fname,1002) ifile
1002 format('000000_',i6.6,'.wav')
do isig=1,nsigs
read(10,1003,end=100) cjunk,isnr,xdt0,ifreq,msg37
1003 format(a4,30x,i3,f5.1,i5,1x,a37)
if(cjunk.eq.'File') go to 100
if(isnr.lt.-16) isnr=-16
f0=ifreq*93.75/50.0
call random_number(r)
xdt=r*xdtmax
! Source-encode, then get itone()
i3=-1
n3=-1
call pack77(msg37,i3,n3,c77)
call genft4(msg37,0,msgsent37,itone)
nwave0=(NN+2)*NSPS
call gen_ft4wave(itone,NN,NSPS,12000.0,f0,wave0,nwave0)
k0=nint(xdt/dt)
if(k0.lt.1) k0=1
tmp(:k0-1)=0.0
tmp(k0:k0+nwave0-1)=wave0
tmp(k0+nwave0:)=0.0
! Insert this signal into wave() array
sig=sqrt(2*bandwidth_ratio) * 10.0**(0.05*isnr)
wave=wave + sig*tmp
write(*,1100) fname(1:13),isig,isnr,xdt,nint(f0),msg37
1100 format(a13,i4,i5,f5.1,i6,2x,a37)
enddo ! isig
100 backspace 10
do i=1,NZZ !Add gaussian noise at specified SNR
xnoise=gran()
wave(i)=wave(i) + xnoise
enddo
gain=30.0
wave=gain*wave
if(any(abs(wave).gt.32767.0)) print*,"Warning - data will be clipped."
iwave=nint(wave)
h=default_header(12000,NZZ)
open(12,file=fname,status='unknown',access='stream')
write(12) h,iwave !Save to *.wav file
close(12)
print*,' '
enddo ! ifile
go to 999
998 print*,'Cannot open file "messages.txt"'
999 end program ft4sim_mult