WSJT-X/CMakeLists.txt
Bill Somerville 91a840df6e
Bump RC #
2021-07-09 11:28:33 +01:00

1772 lines
51 KiB
CMake

cmake_minimum_required (VERSION 3.7.2 FATAL_ERROR)
if (APPLE)
#
# The following variables define the portability and compatability attributes of the Mac macOS build
# they are choosen with care and should not be changed without good cause.
#
# Among other things these options are chosen to match the portability and compatability options of the
# Qt framework dylibs which can be checked as follows:
#
# otool -l <binary> | grep -A3 LC_VERSION_MIN_MACOSX
#
set (CMAKE_OSX_DEPLOYMENT_TARGET 10.12
CACHE STRING "Earliest version of macOS supported
Earliest version we can support with Qt 5.12, C++11 & libc++ is 10.12.
Do not override this if you intend to build an official deployable installer.")
endif (APPLE)
#
# CMake policies
#
if (POLICY CMP0020)
cmake_policy (SET CMP0020 NEW) # link to Qt winmain on Windows
endif ()
if (POLICY CMP0043)
cmake_policy (SET CMP0043 NEW) # ignore COMPILE_DEFINITIONS_<CONFIG>
endif ()
if (POLICY CMP0048)
cmake_policy (SET CMP0048 NEW) # clear PROJECT_Version_* variables if not set in project() command
endif ()
if (POLICY CMP0063)
cmake_policy (SET CMP0063 NEW) # honour visibility properties for all library types
endif ()
if (POLICY CMP0071)
cmake_policy (SET CMP0071 NEW) # run automoc and autouic on generated sources
endif ()
if (POLICY CMP0075)
cmake_policy (SET CMP0075 NEW) # honour CMAKE_REQUIRED_LIBRARIES in config checks
endif ()
project (wsjtx
VERSION 2.5.0.0
LANGUAGES C CXX Fortran
)
set (PROJECT_DESCRIPTION "WSJT-X: Digital Modes for Weak Signal Communications in Amateur Radio")
set (CMAKE_PROJECT_DESCRIPTION ${PROJECT_DESCRIPTION})
#
# Local CMake modules and support files
#
set (CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/CMake/Modules ${CMAKE_MODULE_PATH})
set (PROJECT_ARCHITECTURE "${CMAKE_SYSTEM_PROCESSOR}")
if (NOT PROJECT_ARCHITECTURE)
# This is supposed to happen already on Windows
if (CMAKE_SIZEOF_VOID_P MATCHES 8)
set (PROJECT_ARCHITECTURE "x64")
else ()
set (PROJECT_ARCHITECTURE "$ENV{PROCESSOR_ARCHITECTURE}")
endif ()
endif ()
message (STATUS "******************************************************")
message (STATUS "Building for for: ${CMAKE_SYSTEM_NAME}-${PROJECT_ARCHITECTURE}")
message (STATUS "******************************************************")
include (set_build_type)
# RC 0 or omitted is a development build, GA is a General Availability release build
set_build_type (RC 4)
set (wsjtx_VERSION "${PROJECT_VERSION_MAJOR}.${PROJECT_VERSION_MINOR}.${PROJECT_VERSION_PATCH}${BUILD_TYPE_REVISION}")
#
# project information
#
set (PROJECT_BUNDLE_NAME "WSJT-X")
set (PROJECT_VENDOR "Joe Taylor, K1JT")
set (PROJECT_CONTACT "Joe Taylor <k1jt@arrl.net>")
set (PROJECT_COPYRIGHT "Copyright (C) 2001-2021 by Joe Taylor, K1JT")
set (PROJECT_HOMEPAGE https://www.physics.princeton.edu/pulsar/K1JT/wsjtx.html)
set (PROJECT_MANUAL wsjtx-main)
set (PROJECT_MANUAL_DIRECTORY_URL https://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/)
set (PROJECT_SAMPLES_URL http://downloads.sourceforge.net/project/wsjt/)
set (PROJECT_SAMPLES_UPLOAD_DEST frs.sourceforge.net:/home/frs/project/wsjt/)
# make sure that the default configuration is a RELEASE
if (NOT CMAKE_BUILD_TYPE)
set (CMAKE_BUILD_TYPE RELEASE CACHE STRING
"Choose the type of build, options are: None Debug Release."
FORCE)
endif (NOT CMAKE_BUILD_TYPE)
if (CMAKE_BUILD_TYPE MATCHES "[Dd][Ee][Bb][Uu][Gg]")
set (is_debug_build 1)
endif ()
#
# Options & features
#
# Some of these directly effect compilation by being defined in
# wsjtx_config.h.in which makes them available to the C/C++
# pre-processor.
#
include (CMakeDependentOption)
# Allow the developer to select if Dynamic or Static libraries are built
OPTION (BUILD_SHARED_LIBS "Build Shared Libraries" OFF)
# Set the LIB_TYPE variable to STATIC
SET (LIB_TYPE STATIC)
if (BUILD_SHARED_LIBS)
# User wants to build Dynamic Libraries, so change the LIB_TYPE variable to CMake keyword 'SHARED'
set (LIB_TYPE SHARED)
endif (BUILD_SHARED_LIBS)
option (UPDATE_TRANSLATIONS "Update source translation translations/*.ts
files (WARNING: make clean will delete the source .ts files! Danger!)")
option (WSJT_SHARED_RUNTIME "Debugging option that allows running from a shared Cloud directory.")
option (WSJT_QDEBUG_TO_FILE "Redirect Qt debuging messages to a trace file.")
option (WSJT_SOFT_KEYING "Apply a ramp to CW keying envelope to reduce transients." ON)
option (WSJT_SKIP_MANPAGES "Skip *nix manpage generation.")
option (WSJT_GENERATE_DOCS "Generate documentation files." ON)
option (WSJT_RIG_NONE_CAN_SPLIT "Allow split operation with \"None\" as rig.")
option (WSJT_TRACE_UDP "Debugging option that turns on UDP message protocol diagnostics.")
option (WSJT_BUILD_UTILS "Build simulators and code demonstrators." ON)
CMAKE_DEPENDENT_OPTION (WSJT_ENABLE_EXPERIMENTAL_FEATURES "Enable features not fully ready for public releases." ON
is_debug_build OFF)
CMAKE_DEPENDENT_OPTION (WSJT_CREATE_WINMAIN
"The wsjtx target is normally built as GUI executable with a WinMain entry point on Windows,
if you want a console application instead then set this option to OFF.
If you just want to see the debug output from the application then the easiest way is to
attach a debugger which will then receive the console output inside its console." ON
"WIN32" OFF)
#
# install locations
#
if (APPLE)
set (CMAKE_INSTALL_BINDIR ${CMAKE_PROJECT_NAME}.app/Contents/MacOS)
set (CMAKE_INSTALL_DATAROOTDIR ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
endif ()
include (GNUInstallDirs)
set (PLUGIN_DESTINATION ${CMAKE_INSTALL_LIBDIR}/plugins)
set (QT_CONF_DESTINATION ${CMAKE_INSTALL_BINDIR})
if (WIN32)
set (PLUGIN_DESTINATION plugins)
elseif (APPLE)
set (PLUGIN_DESTINATION ${CMAKE_INSTALL_BINDIR}/../PlugIns)
set (QT_CONF_DESTINATION ${CMAKE_INSTALL_DATAROOTDIR})
endif ()
set (WSJT_PLUGIN_DESTINATION ${PLUGIN_DESTINATION} CACHE PATH "Path for plugins")
set (WSJT_QT_CONF_DESTINATION ${QT_CONF_DESTINATION} CACHE PATH "Path for the qt.conf file")
#
# Project sources
#
set (fort_qt_CXXSRCS
lib/shmem.cpp
)
set (wsjt_qt_CXXSRCS
helper_functions.cpp
qt_helpers.cpp
widgets/MessageBox.cpp
MetaDataRegistry.cpp
Network/NetworkServerLookup.cpp
revision_utils.cpp
L10nLoader.cpp
WFPalette.cpp
Radio.cpp
RadioMetaType.cpp
NonInheritingProcess.cpp
models/IARURegions.cpp
models/Bands.cpp
models/Modes.cpp
models/FrequencyList.cpp
models/StationList.cpp
widgets/FrequencyLineEdit.cpp
widgets/FrequencyDeltaLineEdit.cpp
item_delegates/CandidateKeyFilter.cpp
item_delegates/ForeignKeyDelegate.cpp
validators/LiveFrequencyValidator.cpp
GetUserId.cpp
Audio/AudioDevice.cpp
Transceiver/Transceiver.cpp
Transceiver/TransceiverBase.cpp
Transceiver/EmulateSplitTransceiver.cpp
Transceiver/TransceiverFactory.cpp
Transceiver/PollingTransceiver.cpp
Transceiver/HamlibTransceiver.cpp
Transceiver/HRDTransceiver.cpp
Transceiver/DXLabSuiteCommanderTransceiver.cpp
Network/NetworkMessage.cpp
Network/MessageClient.cpp
widgets/LettersSpinBox.cpp
widgets/HintedSpinBox.cpp
widgets/RestrictedSpinBox.cpp
widgets/HelpTextWindow.cpp
SampleDownloader.cpp
SampleDownloader/DirectoryDelegate.cpp
SampleDownloader/Directory.cpp
SampleDownloader/FileNode.cpp
SampleDownloader/RemoteFile.cpp
DisplayManual.cpp
MultiSettings.cpp
validators/MaidenheadLocatorValidator.cpp
validators/CallsignValidator.cpp
widgets/SplashScreen.cpp
EqualizationToolsDialog.cpp
widgets/DoubleClickablePushButton.cpp
widgets/DoubleClickableRadioButton.cpp
Network/LotWUsers.cpp
models/DecodeHighlightingModel.cpp
widgets/DecodeHighlightingListView.cpp
models/FoxLog.cpp
widgets/AbstractLogWindow.cpp
widgets/FoxLogWindow.cpp
widgets/CabrilloLogWindow.cpp
item_delegates/CallsignDelegate.cpp
item_delegates/MaidenheadLocatorDelegate.cpp
item_delegates/FrequencyDelegate.cpp
item_delegates/FrequencyDeltaDelegate.cpp
item_delegates/SQLiteDateTimeDelegate.cpp
models/CabrilloLog.cpp
logbook/AD1CCty.cpp
logbook/WorkedBefore.cpp
logbook/Multiplier.cpp
Network/NetworkAccessManager.cpp
widgets/LazyFillComboBox.cpp
widgets/CheckableItemComboBox.cpp
widgets/BandComboBox.cpp
)
set (wsjt_qtmm_CXXSRCS
Audio/BWFFile.cpp
)
set (jt9_FSRCS
lib/jt9.f90
lib/jt9a.f90
)
set (wsjtx_CXXSRCS
WSJTXLogging.cpp
logbook/logbook.cpp
Network/PSKReporter.cpp
Modulator/Modulator.cpp
Detector/Detector.cpp
widgets/logqso.cpp
widgets/displaytext.cpp
Decoder/decodedtext.cpp
getfile.cpp
Audio/soundout.cpp
Audio/soundin.cpp
widgets/meterwidget.cpp
widgets/signalmeter.cpp
widgets/plotter.cpp
widgets/widegraph.cpp
widgets/echograph.cpp
widgets/echoplot.cpp
widgets/fastgraph.cpp
widgets/fastplot.cpp
widgets/about.cpp
widgets/astro.cpp
widgets/messageaveraging.cpp
widgets/colorhighlighting.cpp
WSPR/WsprTxScheduler.cpp
widgets/mainwindow.cpp
Configuration.cpp
main.cpp
Network/wsprnet.cpp
WSPR/WSPRBandHopping.cpp
widgets/ExportCabrillo.cpp
)
set (wsjt_CXXSRCS
Logger.cpp
lib/crc10.cpp
lib/crc13.cpp
lib/crc14.cpp
)
# deal with a GCC v6 UB error message
set_source_files_properties (
lib/crc10.cpp
lib/crc13.cpp
lib/crc14.cpp
PROPERTIES COMPILE_FLAGS -fpermissive)
if (WIN32)
set (wsjt_CXXSRCS
${wsjt_CXXSRCS}
killbyname.cpp
)
set (wsjt_qt_CXXSRCS
${wsjt_qt_CXXSRCS}
Transceiver/OmniRigTransceiver.cpp
)
endif (WIN32)
set (wsjt_FSRCS
# put module sources first in the hope that they get rebuilt before use
lib/types.f90
lib/C_interface_module.f90
lib/shmem.f90
lib/crc.f90
lib/fftw3mod.f90
lib/hashing.f90
lib/iso_c_utilities.f90
lib/jt4.f90
lib/jt4_decode.f90
lib/jt65_decode.f90
lib/jt65_mod.f90
lib/ft8_decode.f90
lib/ft4_decode.f90
lib/fst4_decode.f90
lib/jt9_decode.f90
lib/options.f90
lib/packjt.f90
lib/77bit/packjt77.f90
lib/qra/q65/q65.f90
lib/q65_decode.f90
lib/readwav.f90
lib/timer_C_wrapper.f90
lib/timer_impl.f90
lib/timer_module.f90
lib/wavhdr.f90
lib/qra/q65/q65_encoding_modules.f90
# remaining non-module sources
lib/addit.f90
lib/afc65b.f90
lib/afc9.f90
lib/ana64.f90
lib/ana932.f90
lib/analytic.f90
lib/astro.f90
lib/astrosub.f90
lib/astro0.f90
lib/avecho.f90
lib/averms.f90
lib/azdist.f90
lib/ft8/baseline.f90
lib/ft4/ft4_baseline.f90
lib/blanker.f90
lib/bpdecode40.f90
lib/bpdecode128_90.f90
lib/ft8/bpdecode174_91.f90
lib/baddata.f90
lib/calibrate.f90
lib/ccf2.f90
lib/ccf65.f90
lib/ft8/chkcrc13a.f90
lib/ft8/chkcrc14a.f90
lib/chkcall.f90
lib/chkhist.f90
lib/chkmsg.f90
lib/chkss2.f90
lib/ft4/clockit.f90
lib/ft8/compress.f90
lib/coord.f90
lib/db.f90
lib/decode4.f90
lib/decode65a.f90
lib/decode65b.f90
lib/decode9w.f90
lib/ft8/decode174_91.f90
lib/decoder.f90
lib/deep4.f90
lib/deg2grid.f90
lib/degrade_snr.f90
lib/demod64a.f90
lib/determ.f90
lib/downsam9.f90
lib/encode232.f90
lib/encode4.f90
lib/encode_msk40.f90
lib/encode_128_90.f90
lib/ft8/encode174_91.f90
lib/ft8/encode174_91_nocrc.f90
lib/entail.f90
lib/ephem.f90
lib/extract.f90
lib/extract4.f90
lib/extractmessage77.f90
lib/fano232.f90
lib/fast9.f90
lib/fast_decode.f90
lib/fchisq.f90
lib/fchisq0.f90
lib/fchisq65.f90
lib/fil3.f90
lib/fil3c.f90
lib/fil4.f90
lib/fil6521.f90
lib/filbig.f90
lib/ft8/filt8.f90
lib/fitcal.f90
lib/flat1.f90
lib/flat1a.f90
lib/flat1b.f90
lib/flat2.f90
lib/flat4.f90
lib/flat65.f90
lib/fmtmsg.f90
lib/foldspec9f.f90
lib/four2a.f90
lib/ft8/foxfilt.f90
lib/ft8/foxgen.f90
lib/ft8/foxgen_wrap.f90
lib/freqcal.f90
lib/ft8/ft8apset.f90
lib/ft8/ft8b.f90
lib/ft8/ft8code.f90
lib/ft8/ft8_downsample.f90
lib/ft8/ft8sim.f90
lib/gen4.f90
lib/gen65.f90
lib/gen9.f90
lib/genwave.f90
lib/ft8/genft8.f90
lib/qra/q65/genq65.f90
lib/genmsk_128_90.f90
lib/genmsk40.f90
lib/ft4/ft4code.f90
lib/ft4/genft4.f90
lib/ft4/gen_ft4wave.f90
lib/ft8/gen_ft8wave.f90
lib/ft8/genft8refsig.f90
lib/genwspr.f90
lib/geodist.f90
lib/ft8/get_crc14.f90
lib/getlags.f90
lib/getmet4.f90
lib/ft8/get_spectrum_baseline.f90
lib/ft2/gfsk_pulse.f90
lib/graycode.f90
lib/graycode65.f90
lib/grayline.f90
lib/grid2deg.f90
lib/ft8/h1.f90
lib/hash.f90
lib/hint65.f90
lib/hspec.f90
lib/indexx.f90
lib/init_random_seed.f90
lib/interleave4.f90
lib/interleave63.f90
lib/interleave9.f90
lib/inter_wspr.f90
lib/jplsubs.f
lib/jt9fano.f90
lib/jtmsg.f90
lib/libration.f90
lib/lorentzian.f90
lib/fst4/lorentzian_fading.f90
lib/lpf1.f90
lib/map65_mmdec.f90
lib/mixlpf.f90
lib/makepings.f90
lib/moondopjpl.f90
lib/morse.f90
lib/move.f90
lib/msk40decodeframe.f90
lib/msk144decodeframe.f90
lib/msk40spd.f90
lib/msk144spd.f90
lib/msk40sync.f90
lib/msk144sync.f90
lib/msk40_freq_search.f90
lib/msk144_freq_search.f90
lib/mskrtd.f90
lib/msk144signalquality.f90
lib/msk144sim.f90
lib/mskrtd.f90
lib/nuttal_window.f90
lib/ft4/ft4sim.f90
lib/ft4/ft4sim_mult.f90
lib/ft4/ft4_downsample.f90
lib/77bit/my_hash.f90
lib/wsprd/osdwspr.f90
lib/ft8/osd174_91.f90
lib/osd128_90.f90
lib/pctile.f90
lib/peakdt9.f90
lib/peakup.f90
lib/plotsave.f90
lib/platanh.f90
lib/pltanh.f90
lib/polyfit.f90
lib/prog_args.f90
lib/ps4.f90
lib/qra/q65/q65_ap.f90
lib/qra/q65/q65_loops.f90
lib/qra/q65/q65_set_list.f90
lib/refspectrum.f90
lib/savec2.f90
lib/sec0.f90
lib/sec_midn.f90
lib/setup65.f90
lib/sh65.f90
lib/sh65snr.f90
lib/slasubs.f
lib/sleep_msec.f90
lib/slope.f90
lib/smo.f90
lib/smo121.f90
lib/softsym.f90
lib/softsym9f.f90
lib/softsym9w.f90
lib/shell.f90
lib/spec64.f90
lib/spec9f.f90
lib/stdmsg.f90
lib/subtract65.f90
lib/ft8/subtractft8.f90
lib/ft4/subtractft4.f90
lib/sun.f90
lib/symspec.f90
lib/symspec2.f90
lib/symspec65.f90
lib/sync4.f90
lib/sync65.f90
lib/ft4/getcandidates4.f90
lib/ft4/get_ft4_bitmetrics.f90
lib/ft8/sync8.f90
lib/ft8/sync8d.f90
lib/ft4/sync4d.f90
lib/sync9.f90
lib/sync9f.f90
lib/sync9w.f90
lib/timf2.f90
lib/tweak1.f90
lib/twkfreq.f90
lib/ft8/twkfreq1.f90
lib/twkfreq65.f90
lib/update_recent_calls.f90
lib/update_msk40_hasharray.f90
lib/ft8/watterson.f90
lib/wav11.f90
lib/wav12.f90
lib/xcor.f90
lib/xcor4.f90
lib/wqdecode.f90
lib/wqencode.f90
lib/wspr_downsample.f90
lib/zplot9.f90
lib/fst4/decode240_101.f90
lib/fst4/decode240_74.f90
lib/fst4/encode240_101.f90
lib/fst4/encode240_74.f90
lib/fst4/fst4sim.f90
lib/fst4/gen_fst4wave.f90
lib/fst4/genfst4.f90
lib/fst4/get_fst4_bitmetrics.f90
lib/fst4/get_fst4_bitmetrics2.f90
lib/fst4/ldpcsim240_101.f90
lib/fst4/ldpcsim240_74.f90
lib/fst4/osd240_101.f90
lib/fst4/osd240_74.f90
lib/fst4/fastosd240_74.f90
lib/fst4/get_crc24.f90
lib/fst4/fst4_baseline.f90
)
# temporary workaround for a gfortran v7.3 ICE on Fedora 27 64-bit
set_source_files_properties (lib/slasubs.f PROPERTIES COMPILE_FLAGS -O2)
set (ka9q_CSRCS
lib/ftrsd/decode_rs.c
lib/ftrsd/encode_rs.c
lib/ftrsd/init_rs.c
)
set_source_files_properties (${ka9q_CSRCS} PROPERTIES COMPILE_FLAGS -Wno-sign-compare)
set (qra_CSRCS
lib/qra/qracodes/qra12_63_64_irr_b.c
lib/qra/qracodes/qra13_64_64_irr_e.c
lib/qra/q65/npfwht.c
lib/qra/q65/pdmath.c
lib/qra/q65/qracodes.c
lib/qra/q65/normrnd.c
lib/qra/q65/qra15_65_64_irr_e23.c
lib/qra/q65/q65.c
lib/qra/q65/q65_subs.c
)
set (wsjt_CSRCS
${ka9q_CSRCS}
lib/ftrsd/ftrsdap.c
lib/sgran.c
lib/golay24_table.c
lib/gran.c
lib/igray.c
lib/init_random_seed.c
lib/ldpc32_table.c
lib/wsprd/nhash.c
lib/tab.c
lib/tmoonsub.c
lib/usleep.c
lib/vit213.c
lib/wisdom.c
lib/wrapkarn.c
${ldpc_CSRCS}
${qra_CSRCS}
)
set (wsjt_qt_UISRCS
wf_palette_design_dialog.ui
widgets/FoxLogWindow.ui
widgets/CabrilloLogWindow.ui
)
set (wsprsim_CSRCS
lib/wsprd/wsprsim.c
lib/wsprd/wsprsim_utils.c
lib/wsprd/wsprd_utils.c
lib/wsprd/fano.c
lib/wsprd/tab.c
lib/wsprd/nhash.c
)
set (wsprd_CSRCS
lib/wsprd/wsprd.c
lib/wsprd/wsprsim_utils.c
lib/wsprd/wsprd_utils.c
lib/wsprd/fano.c
lib/wsprd/jelinek.c
lib/wsprd/tab.c
lib/wsprd/nhash.c
lib/init_random_seed.c
)
set (wsjtx_UISRCS
widgets/mainwindow.ui
widgets/about.ui
widgets/astro.ui
widgets/colorhighlighting.ui
widgets/echograph.ui
widgets/fastgraph.ui
widgets/messageaveraging.ui
widgets/widegraph.ui
widgets/logqso.ui
Configuration.ui
widgets/ExportCabrillo.ui
)
set (UDP_library_CXXSRCS
Radio.cpp
RadioMetaType.cpp
Network/NetworkMessage.cpp
UDPExamples/MessageServer.cpp
)
set (UDP_library_HEADERS
Radio.hpp
UDPExamples/MessageServer.hpp
${PROJECT_BINARY_DIR}/udp_export.h
)
set (message_aggregator_CXXSRCS
UDPExamples/MessageAggregator.cpp
UDPExamples/MessageAggregatorMainWindow.cpp
UDPExamples/DecodesModel.cpp
UDPExamples/BeaconsModel.cpp
UDPExamples/ClientWidget.cpp
validators/MaidenheadLocatorValidator.cpp
)
set (message_aggregator_STYLESHEETS
UDPExamples/qss/default.qss
)
set (qcp_CXXSRCS
qcustomplot-source/qcustomplot.cpp
)
set (all_CXXSRCS
${wsjt_CXXSRCS}
${fort_qt_CXXSRCS}
${wsjt_qt_CXXSRCS}
${wsjt_qtmm_CXXSRCS}
${wsjtx_CXXSRCS}
${qcp_CXXSRCS}
)
set (all_C_and_CXXSRCS
${wsjt_CSRCS}
${wsprsim_CSRCS}
${wsprd_CSRCS}
${all_CXXSRCS}
)
set (TOP_LEVEL_RESOURCES
icons/Darwin/wsjtx.iconset/icon_128x128.png
contrib/gpl-v3-logo.svg
artwork/splash.png
)
set (PALETTE_FILES
Palettes/Banana.pal
Palettes/Blue1.pal
Palettes/Blue2.pal
Palettes/Blue3.pal
Palettes/Brown.pal
Palettes/Cyan1.pal
Palettes/Cyan2.pal
Palettes/Cyan3.pal
Palettes/Default.pal
Palettes/Digipan.pal
Palettes/Fldigi.pal
Palettes/Gray1.pal
Palettes/Gray2.pal
Palettes/Green1.pal
Palettes/Green2.pal
Palettes/Jungle.pal
Palettes/Linrad.pal
Palettes/Negative.pal
Palettes/Orange.pal
Palettes/Pink.pal
Palettes/Rainbow.pal
Palettes/Scope.pal
Palettes/Sunburst.pal
Palettes/VK4BDJ.pal
Palettes/YL2KF.pal
Palettes/Yellow1.pal
Palettes/Yellow2.pal
Palettes/ZL1FZ.pal
)
if (APPLE)
set (WSJTX_ICON_FILE ${CMAKE_PROJECT_NAME}.icns)
set (ICONSRCS
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_16x16.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_16x16@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_32x32.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_32x32@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_128x128.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_128x128@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_256x256.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_256x256@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_512x512.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_512x512@2x.png
)
add_custom_command (
OUTPUT ${WSJTX_ICON_FILE}
COMMAND iconutil -c icns --output "${CMAKE_BINARY_DIR}/${WSJTX_ICON_FILE}" "${CMAKE_SOURCE_DIR}/icons/Darwin/${CMAKE_PROJECT_NAME}.iconset"
DEPENDS ${ICONSRCS}
COMMENT "Building Icons"
)
else ()
set (WSJTX_ICON_FILE icons/windows-icons/wsjtx.ico)
endif (APPLE)
set_source_files_properties (${WSJTX_ICON_FILE} PROPERTIES MACOSX_PACKAGE_LOCATION Resources)
# suppress intransigent compiler diagnostics
set_source_files_properties (lib/decoder.f90 PROPERTIES COMPILE_FLAGS "-Wno-unused-dummy-argument")
set_source_files_properties (lib/filbig.f90 PROPERTIES COMPILE_FLAGS "-Wno-aliasing")
## disable Qt trace and warning messages from release configurations
#set_property (DIRECTORY APPEND PROPERTY
# COMPILE_DEFINITIONS $<$<NOT:$<CONFIG:Debug>>:QT_NO_DEBUG_OUTPUT;QT_NO_WARNING_OUTPUT>
# )
set_property (SOURCE ${all_C_and_CXXSRCS} APPEND_STRING PROPERTY COMPILE_FLAGS " -include wsjtx_config.h")
set_property (SOURCE ${all_C_and_CXXSRCS} APPEND PROPERTY OBJECT_DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/wsjtx_config.h)
if (WIN32)
# generate the OmniRig COM interface source
find_program (DUMPCPP dumpcpp)
if (DUMPCPP-NOTFOUND)
message (FATAL_ERROR "dumpcpp tool not found")
endif (DUMPCPP-NOTFOUND)
execute_process (
COMMAND ${DUMPCPP} -getfile {4FE359C5-A58F-459D-BE95-CA559FB4F270}
OUTPUT_VARIABLE AXSERVER
OUTPUT_STRIP_TRAILING_WHITESPACE
)
string (STRIP "${AXSERVER}" AXSERVER)
if (NOT AXSERVER)
message (FATAL_ERROR "You need to install OmniRig on this computer")
endif (NOT AXSERVER)
string (REPLACE "\"" "" AXSERVER ${AXSERVER})
file (TO_CMAKE_PATH ${AXSERVER} AXSERVERSRCS)
endif ()
#
# decide on platform specifc packing and fixing up
#
if (APPLE)
set (WSJTX_BUNDLE_VERSION ${wsjtx_VERSION})
# make sure CMAKE_INSTALL_PREFIX ends in /
string (LENGTH "${CMAKE_INSTALL_PREFIX}" LEN)
math (EXPR LEN "${LEN} -1" )
string (SUBSTRING "${CMAKE_INSTALL_PREFIX}" ${LEN} 1 ENDCH)
if (NOT "${ENDCH}" STREQUAL "/")
set (CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}/")
endif ()
endif (APPLE)
#
# find some useful tools
#
include (CheckTypeSize)
include (CheckCSourceCompiles)
include (CheckIncludeFiles)
include (CheckSymbolExists)
include (generate_version_info)
find_program(CTAGS ctags)
find_program(ETAGS etags)
#
# Platform checks
#
check_include_files ("stdlib.h;stdarg.h;string.h;float.h" STDC_HEADERS)
check_include_files (stdio.h HAVE_STDIO_H)
check_include_files (stdlib.h HAVE_STDLIB_H)
check_include_files (unistd.h HAVE_UNISTD_H)
check_include_files (sys/ioctl.h HAVE_SYS_IOCTL_H)
check_include_files (sys/types.h HAVE_SYS_TYPES_H)
check_include_files (fcntl.h HAVE_FCNTL_H)
check_include_files (sys/stat.h HAVE_SYS_STAT_H)
check_include_files ("linux/ppdev.h;linux/parport.h" HAVE_LINUX_PPDEV_H)
check_include_files ("dev/ppbus/ppi.h;dev/ppbus/ppbconf.h" HAVE_DEV_PPBUS_PPI_H)
#
# Standard C Math Library
#
set (LIBM_TEST_SOURCE "#include<math.h>\nfloat f; int main(){sqrt(f);return 0;}")
check_c_source_compiles ("${LIBM_TEST_SOURCE}" HAVE_MATH)
if (HAVE_MATH)
set (LIBM_LIBRARIES)
else ()
set (CMAKE_REQUIRED_LIBRARIES m)
check_c_source_compiles ("${LIBM_TEST_SOURCE}" HAVE_LIBM_MATH)
unset (CMAKE_REQUIRED_LIBRARIES)
if (NOT HAVE_LIBM_MATH)
message (FATAL_ERROR "Unable to use C math library functions")
endif ()
set (LIBM_LIBRARIES m)
endif ()
#
# Boost
#
if (WIN32)
set (Boost_USE_STATIC_LIBS OFF)
endif ()
find_package (Boost 1.62 REQUIRED COMPONENTS log_setup log)
#
# OpenMP
#
find_package (OpenMP)
#
# fftw3 single precision library
#
find_package (FFTW3 COMPONENTS single threads REQUIRED)
#
# hamlib setup
#
find_package (Hamlib REQUIRED)
find_program (RIGCTL_EXE rigctl)
find_program (RIGCTLD_EXE rigctld)
find_program (RIGCTLCOM_EXE rigctlcom)
check_type_size (CACHE_ALL HAMLIB_OLD_CACHING)
check_symbol_exists (rig_set_cache_timeout_ms "hamlib/rig.h" HAVE_HAMLIB_CACHING)
find_package (Portaudio REQUIRED)
find_package (Usb REQUIRED)
#
# Qt5 setup
#
# Widgets finds its own dependencies.
find_package (Qt5 COMPONENTS Widgets SerialPort Multimedia PrintSupport Sql LinguistTools REQUIRED)
if (WIN32)
add_definitions (-DQT_NEEDS_QTMAIN)
find_package (Qt5AxContainer REQUIRED)
endif (WIN32)
#
# Library building setup
#
include (GenerateExportHeader)
set (CMAKE_CXX_VISIBILITY_PRESET hidden)
set (CMAKE_C_VISIBILITY_PRESET hidden)
set (CMAKE_Fortran_VISIBILITY_PRESET hidden)
set (CMAKE_VISIBILITY_INLINES_HIDDEN ON)
#set (CMAKE_INCLUDE_CURRENT_DIR_IN_INTERFACE ON)
#
# C & C++ setup
#
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra")
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Werror -Wall -Wextra -fexceptions -frtti")
if (NOT APPLE)
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-pragmas")
if (${OPENMP_FOUND})
if (OpenMP_C_FLAGS)
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${OpenMP_C_FLAGS}")
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${OpenMP_C_FLAGS}")
endif ()
endif ()
set (CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -fdata-sections -ffunction-sections")
set (CMAKE_C_FLAGS_MINSIZEREL "${CMAKE_C_FLAGS_MINSIZEREL} -fdata-sections -ffunction-sections")
set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -fdata-sections -ffunction-sections")
set (CMAKE_CXX_FLAGS_MINSIZEREL "${CMAKE_CXX_FLAGS_MINSIZEREL} -fdata-sections -ffunction-sections")
endif (NOT APPLE)
if (WIN32)
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS}")
endif (WIN32)
if (APPLE AND ${CMAKE_CXX_COMPILER_ID} STREQUAL "Clang")
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11 -stdlib=libc++")
else ()
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -pthread")
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} --std=gnu++11 -pthread")
endif ()
#
# Fortran setup
#
set (General_FFLAGS "-Wall -Wno-conversion -fno-second-underscore")
# FFLAGS depend on the compiler
get_filename_component (Fortran_COMPILER_NAME ${CMAKE_Fortran_COMPILER} NAME)
if (Fortran_COMPILER_NAME MATCHES "gfortran.*")
# gfortran
# CMake compiler test is supposed to do this but doesn't yet
if (CMAKE_OSX_DEPLOYMENT_TARGET)
set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -mmacosx-version-min=${CMAKE_OSX_DEPLOYMENT_TARGET}")
endif (CMAKE_OSX_DEPLOYMENT_TARGET)
if (CMAKE_OSX_SYSROOT)
set (CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} -isysroot ${CMAKE_OSX_SYSROOT}")
endif (CMAKE_OSX_SYSROOT)
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -fbounds-check -funroll-all-loops -fno-f2c -ffpe-summary=invalid,zero,overflow,underflow ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -g -fbacktrace -fbounds-check -fno-f2c -ffpe-summary=invalid,zero,overflow,underflow ${General_FFLAGS}")
# FPE traps currently disabled in Debug configuration builds until
# we decide if they are meaningful, without these FP instructions
# run in nonstop mode and do not trap
#set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} ${CMAKE_Fortran_FLAGS_DEBUG} -ffpe-trap=invalid,zero,overflow")
elseif (Fortran_COMPILER_NAME MATCHES "ifort.*")
# ifort (untested)
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -f77rtl ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -f77rtl ${General_FFLAGS}")
elseif (Fortran_COMPILER_NAME MATCHES "g77")
# g77
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -funroll-all-loops -fno-f2c -m32 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -fbounds-check -fno-f2c -m32 ${General_FFLAGS}")
else (Fortran_COMPILER_NAME MATCHES "gfortran.*")
message ("CMAKE_Fortran_COMPILER full path: " ${CMAKE_Fortran_COMPILER})
message ("Fortran compiler: " ${Fortran_COMPILER_NAME})
message ("No optimized Fortran compiler flags are known, we just try -O3...")
set (CMAKE_Fortran_FLAGS_RELEASE "${CMAKE_Fortran_FLAGS_RELEASE} -O3 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "${CMAKE_Fortran_FLAGS_DEBUG} -fbounds-check ${General_FFLAGS}")
endif (Fortran_COMPILER_NAME MATCHES "gfortran.*")
#
# Linker setup
#
if (NOT APPLE)
set (CMAKE_EXE_LINKER_FLAGS_RELEASE "${CMAKE_EXE_LINKER_FLAGS_RELEASE} -Wl,--gc-sections")
set (CMAKE_EXE_LINKER_FLAGS_MINSIZEREL "${CMAKE_EXE_LINKER_FLAGS_MINSIZEREL} -Wl,--gc-sections")
endif (NOT APPLE)
#
# setup and test Fortran C/C++ interaction
#
include (FortranCInterface)
FortranCInterface_VERIFY (CXX)
FortranCInterface_HEADER (FC.h MACRO_NAMESPACE "FC_" SYMBOL_NAMESPACE "FC_"
SYMBOLS
grayline
)
#
# sort out pre-requisites
#
#
# Setup RPATH so that built executable targets will run in both the
# build tree and the install location without having to set a
# (DYLD|LD)_LIBRARY_PATH override.
#
# use the full RPATH of the build tree
set (CMAKE_SKIP_BUILD_RPATH FALSE)
# when building, don't use the install RPATH, it will still be used
# later on in the install phase
set (CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
# set (CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
# add the automaticaly determined parts of the RPATH which point to
# directories outside of the build tree to the install RPATH
set (CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
# the RPATH to be used when installing, but only if it's not a system
# directory
# list (FIND CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}" isSystemDir)
# if ("${isSystemDir}" STREQUAL "-1")
# set (CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
# endif ("${isSystemDir}" STREQUAL "-1")
set (QT_NEED_RPATH FALSE)
if (NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib64" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib64")
set (QT_NEED_RPATH TRUE)
endif ()
#
# stuff only qmake can tell us
#
get_target_property (QMAKE_EXECUTABLE Qt5::qmake LOCATION)
get_target_property (LCONVERT_EXECUTABLE Qt5::lconvert LOCATION)
function (QUERY_QMAKE VAR RESULT)
exec_program (${QMAKE_EXECUTABLE} ARGS "-query ${VAR}" RETURN_VALUE return_code OUTPUT_VARIABLE output)
if (NOT return_code)
file (TO_CMAKE_PATH "${output}" output)
set (${RESULT} ${output} PARENT_SCOPE)
endif (NOT return_code)
message (STATUS "Asking qmake for ${RESULT} and got ${output}")
endfunction (QUERY_QMAKE)
query_qmake (QT_INSTALL_PLUGINS QT_PLUGINS_DIR)
query_qmake (QT_INSTALL_TRANSLATIONS QT_TRANSLATIONS_DIR)
query_qmake (QT_INSTALL_IMPORTS QT_IMPORTS_DIR)
query_qmake (QT_HOST_DATA QT_DATA_DIR)
set (QT_MKSPECS_DIR ${QT_DATA_DIR}/mkspecs)
# project definitions
add_definitions (-DQT5 -DCMAKE_BUILD -DBIGSYM=1 -DBOOST_ALL_DYN_LINK)
if (CMAKE_HOST_UNIX)
add_definitions (-DUNIX)
elseif (CMAKE_HOST_WIN32)
add_definitions (-DWIN32)
endif ()
#
# sub-directories
#
if (EXISTS ${CMAKE_SOURCE_DIR}/samples AND IS_DIRECTORY ${CMAKE_SOURCE_DIR}/samples)
add_subdirectory (samples)
endif ()
if (WSJT_GENERATE_DOCS)
add_subdirectory (doc)
endif (WSJT_GENERATE_DOCS)
if (EXISTS ${CMAKE_SOURCE_DIR}/tests AND IS_DIRECTORY ${CMAKE_SOURCE_DIR}/tests)
add_subdirectory (tests)
endif ()
# build a library of package functionality (without and optionally with OpenMP support)
add_library (wsjt_cxx STATIC ${wsjt_CSRCS} ${wsjt_CXXSRCS})
target_link_libraries (wsjt_cxx ${LIBM_LIBRARIES} Boost::log_setup ${LIBM_LIBRARIES})
# build an OpenMP variant of the Fortran library routines
add_library (wsjt_fort STATIC ${wsjt_FSRCS})
target_link_libraries (wsjt_fort ${FFTW3_LIBRARIES})
if (${OPENMP_FOUND} OR APPLE)
add_library (wsjt_fort_omp STATIC ${wsjt_FSRCS})
target_link_libraries (wsjt_fort_omp ${FFTW3_LIBRARIES})
if (OpenMP_C_FLAGS)
set_target_properties (wsjt_fort_omp
PROPERTIES
COMPILE_FLAGS "${OpenMP_C_FLAGS}"
)
endif ()
set_target_properties (wsjt_fort_omp
PROPERTIES
Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp
)
file (MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp)
if (APPLE)
# On Mac we don't have working OpenMP support in the C/C++
# compilers so we have to manually set the correct flags to get
# OpenMP support in jt9.
target_compile_options (wsjt_fort_omp
PRIVATE
$<$<COMPILE_LANGUAGE:Fortran>:-fopenmp> # assumes GNU style Fortran compiler
)
endif (APPLE)
endif (${OPENMP_FOUND} OR APPLE)
if(WSJT_BUILD_UTILS)
add_executable (jt4sim lib/jt4sim.f90)
target_link_libraries (jt4sim wsjt_fort wsjt_cxx)
add_executable (jt65sim lib/jt65sim.f90)
target_link_libraries (jt65sim wsjt_fort wsjt_cxx)
add_executable (sumsim lib/sumsim.f90)
target_link_libraries (sumsim wsjt_fort wsjt_cxx)
add_executable (q65sim lib/qra/q65/q65sim.f90)
target_link_libraries (q65sim wsjt_fort wsjt_cxx)
add_executable (q65code lib/qra/q65/q65code.f90)
target_link_libraries (q65code wsjt_fort wsjt_cxx)
add_executable (test_q65 lib/test_q65.f90)
target_link_libraries (test_q65 wsjt_fort wsjt_cxx)
add_executable (q65_ftn_test lib/qra/q65/q65_ftn_test.f90)
target_link_libraries (q65_ftn_test wsjt_fort wsjt_cxx)
add_executable (jt49sim lib/jt49sim.f90)
target_link_libraries (jt49sim wsjt_fort wsjt_cxx)
#add_executable (allsim lib/allsim.f90)
#target_link_libraries (allsim wsjt_fort wsjt_cxx)
add_executable (rtty_spec lib/rtty_spec.f90)
target_link_libraries (rtty_spec wsjt_fort wsjt_cxx)
add_executable (jt65code lib/jt65code.f90)
target_link_libraries (jt65code wsjt_fort wsjt_cxx)
add_executable (jt9code lib/jt9code.f90)
target_link_libraries (jt9code wsjt_fort wsjt_cxx)
add_executable (wsprcode lib/wsprcode/wsprcode.f90 lib/wsprcode/nhash.c)
target_link_libraries (wsprcode wsjt_fort wsjt_cxx)
add_executable (encode77 lib/77bit/encode77.f90)
target_link_libraries (encode77 wsjt_fort wsjt_cxx)
add_executable (wsprsim ${wsprsim_CSRCS})
target_link_libraries (wsprsim ${LIBM_LIBRARIES})
add_executable (jt4code lib/jt4code.f90)
target_link_libraries (jt4code wsjt_fort wsjt_cxx)
add_executable (msk144code lib/msk144code.f90)
target_link_libraries (msk144code wsjt_fort wsjt_cxx)
add_executable (ft8code lib/ft8/ft8code.f90)
target_link_libraries (ft8code wsjt_fort wsjt_cxx)
add_executable (ft4code lib/ft4/ft4code.f90)
target_link_libraries (ft4code wsjt_fort wsjt_cxx)
add_executable (ft8sim lib/ft8/ft8sim.f90)
target_link_libraries (ft8sim wsjt_fort wsjt_cxx)
add_executable (msk144sim lib/msk144sim.f90)
target_link_libraries (msk144sim wsjt_fort wsjt_cxx)
add_executable (ft4sim lib/ft4/ft4sim.f90)
target_link_libraries (ft4sim wsjt_fort wsjt_cxx)
add_executable (ft4sim_mult lib/ft4/ft4sim_mult.f90)
target_link_libraries (ft4sim_mult wsjt_fort wsjt_cxx)
add_executable (fst4sim lib/fst4/fst4sim.f90)
target_link_libraries (fst4sim wsjt_fort wsjt_cxx)
if (WIN32)
set_target_properties (fst4sim PROPERTIES
LINK_FLAGS -Wl,--stack,0x4000000,--heap,0x6000000
)
endif ()
add_executable (ldpcsim240_101 lib/fst4/ldpcsim240_101.f90)
target_link_libraries (ldpcsim240_101 wsjt_fort wsjt_cxx)
add_executable (ldpcsim240_74 lib/fst4/ldpcsim240_74.f90)
target_link_libraries (ldpcsim240_74 wsjt_fort wsjt_cxx)
endif(WSJT_BUILD_UTILS)
add_executable (fmtave lib/fmtave.f90)
add_executable (fcal lib/fcal.f90)
add_executable (fmeasure lib/fmeasure.f90)
# build the wsprd WSPR mode decoder driver
generate_version_info (wsprd_VERSION_RESOURCES
NAME wsprd
BUNDLE ${PROJECT_BUNDLE_NAME}
ICON ${WSJTX_ICON_FILE}
FILE_DESCRIPTION "WSPR mode decoder"
)
add_executable (wsprd ${wsprd_CSRCS} lib/indexx.f90 lib/wsprd/osdwspr.f90 ${wsprd_VERSION_RESOURCES})
target_include_directories (wsprd PRIVATE ${FFTW3_INCLUDE_DIRS})
target_link_libraries (wsprd ${FFTW3_LIBRARIES} ${LIBM_LIBRARIES})
# Tell CMake to run moc when necessary
set (CMAKE_AUTOMOC ON)
include_directories (${CMAKE_CURRENT_BINARY_DIR})
# don't use Qt "keywords" signal, slot, emit in generated files to
# avoid compatability issue with other libraries
# ADD_DEFINITIONS (-DQT_NO_KEYWORDS)
# ADD_DEFINITIONS (-DUNICODE) #as per qmake
# As moc files are generated in the binary dir, tell CMake to always
# look for includes there:
set (CMAKE_INCLUDE_CURRENT_DIR ON)
#
# source navigation
#
set (sources
${CMAKE_SOURCE_DIR}/*
${CMAKE_SOURCE_DIR}/logbook/*
${CMAKE_SOURCE_DIR}/lib/*
)
add_custom_target (ctags COMMAND ${CTAGS} -o ${CMAKE_SOURCE_DIR}/tags -R ${sources})
add_custom_target (etags COMMAND ${ETAGS} -o ${CMAKE_SOURCE_DIR}/TAGS -R ${sources})
# Qt i18n - always include the country generic if any regional variant is included
set (LANGUAGES
ca # Catalan
da # Danish
en # English (we need this to stop
# translation loaders loading the
# second preference UI languge, it
# doesn't need to be populated)
en_GB # English UK
es # Spanish
it # Italian
ja # Japanese
#no # Norwegian
#pt # Portuguese
#sv # Swedish
zh # Chinese
zh_HK # Chinese per Hong Kong
it # Italian
)
foreach (lang_ ${LANGUAGES})
file (TO_NATIVE_PATH ${CMAKE_SOURCE_DIR}/translations/wsjtx_${lang_}.ts ts_)
list (APPEND TS_FILES ${ts_})
set (qt_translations_ "${QT_TRANSLATIONS_DIR}/qtbase_${lang_}.qm")
if (EXISTS "${qt_translations_}")
add_custom_command (
OUTPUT "${CMAKE_BINARY_DIR}/qt_${lang_}.qm"
COMMAND ${LCONVERT_EXECUTABLE} -o "${CMAKE_BINARY_DIR}/qt_${lang_}.qm" ${qt_translations_}
COMMENT "Building required Qt translations for language ${lang_}"
)
list (APPEND QM_FILES "${CMAKE_BINARY_DIR}/qt_${lang_}.qm")
endif ()
endforeach ()
if (UPDATE_TRANSLATIONS)
message (STATUS "UPDATE_TRANSLATIONS option is set.")
qt5_create_translation (
QM_FILES ${wsjt_qt_UISRCS} ${wsjtx_UISRCS} ${wsjt_qt_CXXSRCS} ${wsjtx_CXXSRCS}
${TS_FILES}
OPTIONS -I${CMAKE_CURRENT_SOURCE_DIR}
)
else ()
qt5_add_translation (QM_FILES ${TS_FILES})
endif ()
add_custom_target (translations DEPENDS ${QM_FILES})
set_property (DIRECTORY PROPERTY CLEAN_NO_CUSTOM TRUE)
# embedded resources
function (add_resources resources path)
foreach (resource_file_ ${ARGN})
get_filename_component (name_ ${resource_file_} NAME)
if (IS_ABSOLUTE "${resource_file_}")
file (TO_NATIVE_PATH ${resource_file_} source_)
else ()
file (TO_NATIVE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/${resource_file_} source_)
endif ()
file (TO_NATIVE_PATH ${path}/${name_} dest_)
set (resources_ "${resources_}\n <file alias=\"${dest_}\">${source_}</file>")
set (${resources} ${${resources}}${resources_} PARENT_SCOPE)
endforeach (resource_file_ ${ARGN})
endfunction (add_resources resources path)
add_resources (wsjtx_RESOURCES "" ${TOP_LEVEL_RESOURCES})
add_resources (wsjtx_RESOURCES /Palettes ${PALETTE_FILES})
add_resources (wsjtx_RESOURCES /Translations ${QM_FILES})
configure_file (wsjtx.qrc.in wsjtx.qrc @ONLY)
# UI generation
qt5_wrap_ui (wsjt_qt_GENUISRCS ${wsjt_qt_UISRCS})
qt5_wrap_ui (wsjtx_GENUISRCS ${wsjtx_UISRCS})
# Resource generation
qt5_add_resources (wsjtx_RESOURCES_RCC
${CMAKE_BINARY_DIR}/wsjtx.qrc
contrib/QDarkStyleSheet/qdarkstyle/style.qrc
)
# AX COM servers
if (WIN32)
include (QtAxMacros)
wrap_ax_server (GENAXSRCS ${AXSERVERSRCS})
endif (WIN32)
#
# targets dependent on Qt
#
# build a library for the QCustomPlot widget
add_library (qcp STATIC ${qcp_CXXSRCS})
target_include_directories (qcp PUBLIC $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/qcustomplot-source>)
target_link_libraries (qcp Qt5::Widgets Qt5::PrintSupport)
# build a library of package Qt functionality
add_library (wsjt_qt STATIC ${wsjt_qt_CXXSRCS} ${wsjt_qt_GENUISRCS} ${GENAXSRCS})
# set wsjtx_udp exports to static variants
target_compile_definitions (wsjt_qt PUBLIC UDP_STATIC_DEFINE)
target_link_libraries (wsjt_qt Hamlib::Hamlib Boost::log qcp Qt5::Widgets Qt5::Network Qt5::Sql)
if (WIN32)
target_link_libraries (wsjt_qt Qt5::AxContainer Qt5::AxBase)
endif (WIN32)
# build a library of package Qt functionality used in Fortran utilities
add_library (fort_qt STATIC ${fort_qt_CXXSRCS})
target_link_libraries (fort_qt Qt5::Core)
# build a library of WSJT Qt multimedia components
add_library (wsjt_qtmm STATIC ${wsjt_qtmm_CXXSRCS} ${wsjt_qtmm_GENUISRCS})
target_link_libraries (wsjt_qtmm Qt5::Multimedia)
# build the jt9 slow mode decoder driver
generate_version_info (jt9_VERSION_RESOURCES
NAME jt9
BUNDLE ${PROJECT_BUNDLE_NAME}
ICON ${WSJTX_ICON_FILE}
FILE_DESCRIPTION "jt9 - WSJT-X slow mode decoder"
)
add_executable (record_time_signal Audio/tools/record_time_signal.cpp)
target_link_libraries (record_time_signal wsjt_cxx wsjt_qtmm wsjt_qt)
add_executable (jt9 ${jt9_FSRCS} ${jt9_VERSION_RESOURCES})
if (${OPENMP_FOUND} OR APPLE)
if (APPLE)
# On Mac we don't have working OpenMP support in the C/C++
# compilers so we have to manually set the correct linking flags
# and libraries to get OpenMP support in jt9.
set_target_properties (jt9
PROPERTIES
Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp
LINK_LIBRARIES "gomp;gcc_s.1" # assume GNU libgcc OpenMP
)
target_compile_options (jt9
PRIVATE
$<$<COMPILE_LANGUAGE:Fortran>:-fopenmp> # assumes GNU style Fortran compiler
)
else (APPLE)
if (OpenMP_C_FLAGS)
set_target_properties (jt9
PROPERTIES
COMPILE_FLAGS "${OpenMP_C_FLAGS}"
LINK_FLAGS "${OpenMP_C_FLAGS}"
)
endif ()
set_target_properties (jt9
PROPERTIES
Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp
)
endif (APPLE)
if (WIN32)
set_target_properties (jt9 PROPERTIES
LINK_FLAGS -Wl,--stack,16777216
)
endif ()
target_link_libraries (jt9 wsjt_fort_omp wsjt_cxx fort_qt)
else (${OPENMP_FOUND} OR APPLE)
target_link_libraries (jt9 wsjt_fort wsjt_cxx fort_qt)
endif (${OPENMP_FOUND} OR APPLE)
if (WIN32)
# build map65
add_subdirectory (map65)
endif ()
# build the main application
generate_version_info (wsjtx_VERSION_RESOURCES
NAME wsjtx
BUNDLE ${PROJECT_BUNDLE_NAME}
ICON ${WSJTX_ICON_FILE}
)
add_executable (wsjtx MACOSX_BUNDLE
${wsjtx_CXXSRCS}
${wsjtx_GENUISRCS}
${WSJTX_ICON_FILE}
${wsjtx_RESOURCES_RCC}
${wsjtx_VERSION_RESOURCES}
)
if (WSJT_CREATE_WINMAIN)
set_target_properties (wsjtx PROPERTIES WIN32_EXECUTABLE ON)
endif (WSJT_CREATE_WINMAIN)
set_target_properties (wsjtx PROPERTIES
MACOSX_BUNDLE_INFO_PLIST "${CMAKE_CURRENT_SOURCE_DIR}/Darwin/Info.plist.in"
MACOSX_BUNDLE_INFO_STRING "${PROJECT_DESCRIPTION}"
MACOSX_BUNDLE_ICON_FILE "${WSJTX_ICON_FILE}"
MACOSX_BUNDLE_BUNDLE_VERSION ${PROJECT_VERSION_MAJOR}.${PROJECT_VERSION_MINOR}.${PROJECT_VERSION_PATCH}
MACOSX_BUNDLE_SHORT_VERSION_STRING "v${PROJECT_VERSION_MAJOR}.${PROJECT_VERSION_MINOR}.${PROJECT_VERSION_PATCH}"
MACOSX_BUNDLE_LONG_VERSION_STRING "Version ${PROJECT_VERSION_MAJOR}.${PROJECT_VERSION_MINOR}.${PROJECT_VERSION_PATCH}${SCS_VERSION_STR}"
MACOSX_BUNDLE_BUNDLE_NAME "${PROJECT_BUNDLE_NAME}"
MACOSX_BUNDLE_BUNDLE_EXECUTABLE_NAME "${PROJECT_NAME}"
MACOSX_BUNDLE_COPYRIGHT "${PROJECT_COPYRIGHT}"
MACOSX_BUNDLE_GUI_IDENTIFIER "org.k1jt.wsjtx"
)
target_include_directories (wsjtx PRIVATE ${FFTW3_INCLUDE_DIRS})
if (APPLE)
target_link_libraries (wsjtx wsjt_fort)
else ()
target_link_libraries (wsjtx wsjt_fort_omp)
if (OpenMP_C_FLAGS)
set_target_properties (wsjtx PROPERTIES
COMPILE_FLAGS "${OpenMP_C_FLAGS}"
LINK_FLAGS "${OpenMP_C_FLAGS}"
)
endif ()
set_target_properties (wsjtx PROPERTIES
Fortran_MODULE_DIRECTORY ${CMAKE_BINARY_DIR}/fortran_modules_omp
)
if (WIN32)
set_target_properties (wsjtx PROPERTIES
LINK_FLAGS -Wl,--stack,0x1000000,--heap,0x20000000
)
endif ()
endif ()
target_link_libraries (wsjtx Qt5::SerialPort wsjt_cxx wsjt_qt wsjt_qtmm ${FFTW3_LIBRARIES} ${LIBM_LIBRARIES})
# make a library for WSJT-X UDP servers
# add_library (wsjtx_udp SHARED ${UDP_library_CXXSRCS})
add_library (wsjtx_udp-static STATIC ${UDP_library_CXXSRCS})
#target_include_directories (wsjtx_udp
# INTERFACE
# $<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}/wsjtx>
# )
target_include_directories (wsjtx_udp-static
INTERFACE
$<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}/wsjtx>
)
#set_target_properties (wsjtx_udp PROPERTIES
# PUBLIC_HEADER "${UDP_library_HEADERS}"
# )
set_target_properties (wsjtx_udp-static PROPERTIES
OUTPUT_NAME wsjtx_udp
)
target_compile_definitions (wsjtx_udp-static PUBLIC UDP_STATIC_DEFINE)
target_link_libraries (wsjtx_udp-static Qt5::Network Qt5::Gui)
generate_export_header (wsjtx_udp-static BASE_NAME udp)
generate_version_info (udp_daemon_VERSION_RESOURCES
NAME udp_daemon
BUNDLE ${PROJECT_BUNDLE_NAME}
ICON ${WSJTX_ICON_FILE}
FILE_DESCRIPTION "Example WSJT-X UDP Message Protocol daemon"
)
add_executable (udp_daemon UDPExamples/UDPDaemon.cpp ${udp_daemon_VERSION_RESOURCES})
target_link_libraries (udp_daemon wsjtx_udp-static)
generate_version_info (wsjtx_app_version_VERSION_RESOURCES
NAME wsjtx_app_version
BUNDLE ${PROJECT_BUNDLE_NAME}
ICON ${WSJTX_ICON_FILE}
FILE_DESCRIPTION "Display WSJT-X Application Version on console"
)
add_executable (wsjtx_app_version AppVersion/AppVersion.cpp ${wsjtx_app_version_VERSION_RESOURCES})
target_link_libraries (wsjtx_app_version wsjt_qt)
generate_version_info (message_aggregator_VERSION_RESOURCES
NAME message_aggregator
BUNDLE ${PROJECT_BUNDLE_NAME}
ICON ${WSJTX_ICON_FILE}
FILE_DESCRIPTION "Example WSJT-X UDP Message Protocol application"
)
add_resources (message_aggregator_RESOURCES /qss ${message_aggregator_STYLESHEETS})
configure_file (UDPExamples/message_aggregator.qrc.in message_aggregator.qrc @ONLY)
qt5_add_resources (message_aggregator_RESOURCES_RCC
${CMAKE_CURRENT_BINARY_DIR}/message_aggregator.qrc
contrib/QDarkStyleSheet/qdarkstyle/style.qrc
)
add_executable (message_aggregator
${message_aggregator_CXXSRCS}
${message_aggregator_RESOURCES_RCC}
${message_aggregator_VERSION_RESOURCES}
)
target_link_libraries (message_aggregator wsjt_qt Qt5::Widgets wsjtx_udp-static)
if (WSJT_CREATE_WINMAIN)
set_target_properties (message_aggregator PROPERTIES WIN32_EXECUTABLE ON)
endif (WSJT_CREATE_WINMAIN)
if (UNIX)
if (NOT WSJT_SKIP_MANPAGES)
add_subdirectory (manpages)
add_dependencies (wsjtx manpages)
endif (NOT WSJT_SKIP_MANPAGES)
if (NOT APPLE)
add_subdirectory (debian)
add_dependencies (wsjtx debian)
endif (NOT APPLE)
endif (UNIX)
#
# installation
#
install (TARGETS wsjtx
RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} COMPONENT runtime
BUNDLE DESTINATION . COMPONENT runtime
)
# install (TARGETS wsjtx_udp EXPORT udp
# RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR}
# LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR}
# ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}
# PUBLIC_HEADER DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}/wsjtx
# )
# install (TARGETS wsjtx_udp-static EXPORT udp-static
# DESTINATION ${CMAKE_INSTALL_LIBDIR}
# )
# install (EXPORT udp NAMESPACE wsjtx::
# DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/wsjtx
# )
# install (EXPORT udp-static NAMESPACE wsjtx::
# DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/wsjtx
# )
install (TARGETS udp_daemon message_aggregator wsjtx_app_version
RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} COMPONENT runtime
BUNDLE DESTINATION ${CMAKE_INSTALL_BINDIR} COMPONENT runtime
)
install (TARGETS jt9 wsprd fmtave fcal fmeasure
RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} COMPONENT runtime
BUNDLE DESTINATION ${CMAKE_INSTALL_BINDIR} COMPONENT runtime
)
if(WSJT_BUILD_UTILS)
install (TARGETS ft8code jt65code jt9code jt4code msk144code
q65code fst4sim q65sim
RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} COMPONENT runtime
BUNDLE DESTINATION ${CMAKE_INSTALL_BINDIR} COMPONENT runtime
)
endif(WSJT_BUILD_UTILS)
install (PROGRAMS
${RIGCTL_EXE}
DESTINATION ${CMAKE_INSTALL_BINDIR}
#COMPONENT runtime
RENAME rigctl-wsjtx${CMAKE_EXECUTABLE_SUFFIX}
)
install (PROGRAMS
${RIGCTLD_EXE}
DESTINATION ${CMAKE_INSTALL_BINDIR}
#COMPONENT runtime
RENAME rigctld-wsjtx${CMAKE_EXECUTABLE_SUFFIX}
)
install (PROGRAMS
${RIGCTLCOM_EXE}
DESTINATION ${CMAKE_INSTALL_BINDIR}
#COMPONENT runtime
RENAME rigctlcom-wsjtx${CMAKE_EXECUTABLE_SUFFIX}
)
install (FILES
README
COPYING
AUTHORS
THANKS
NEWS
BUGS
DESTINATION ${CMAKE_INSTALL_DOCDIR}
#COMPONENT runtime
)
install (FILES
cty.dat
cty.dat_copyright.txt
contrib/Ephemeris/JPLEPH
DESTINATION ${CMAKE_INSTALL_DATADIR}/${CMAKE_PROJECT_NAME}
#COMPONENT runtime
)
install (DIRECTORY
example_log_configurations
DESTINATION ${CMAKE_INSTALL_DOCDIR}
FILES_MATCHING REGEX "^.*[^~]$"
#COMPONENT runtime
)
#
# Mac installer files
#
if (APPLE)
install (FILES
Darwin/ReadMe.txt
Darwin/com.wsjtx.sysctl.plist
DESTINATION .
#COMPONENT runtime
)
endif (APPLE)
#
# uninstall support
#
configure_file (
"${CMAKE_CURRENT_SOURCE_DIR}/CMake/cmake_uninstall.cmake.in"
"${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
@ONLY)
add_custom_target (uninstall
"${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake")
# creates or updates ${PROJECT_BINARY_DIR}/scs_version.h using cmake script
add_custom_target (revisiontag
COMMAND ${CMAKE_COMMAND}
-D SOURCE_DIR=${CMAKE_CURRENT_SOURCE_DIR}
-D BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}
-D OUTPUT_DIR=${PROJECT_BINARY_DIR}
-P ${CMAKE_CURRENT_SOURCE_DIR}/CMake/getsvn.cmake
VERBATIM
BYPRODUCTS scs_version.h
COMMENT "Getting source control system revision information"
)
# explicitly say that the wsjt_qt depends on custom target, this is
# done indirectly so that the revisiontag target gets built exactly
# once per build
add_dependencies (wsjt_qt revisiontag)
add_dependencies (jt9 revisiontag)
add_dependencies (wsprd revisiontag)
#
# versioning and configuration
#
configure_file (
"${CMAKE_CURRENT_SOURCE_DIR}/wsjtx_config.h.in"
"${CMAKE_CURRENT_BINARY_DIR}/wsjtx_config.h"
)
if (NOT WIN32 AND NOT APPLE)
# install a desktop file so wsjtx appears in the application start
# menu with an icon
install (
FILES wsjtx.desktop message_aggregator.desktop
DESTINATION share/applications
#COMPONENT runtime
)
install (
FILES icons/Unix/wsjtx_icon.png
DESTINATION share/pixmaps
#COMPONENT runtime
)
endif (NOT WIN32 AND NOT APPLE)
if (APPLE)
set (CMAKE_POSTFLIGHT_SCRIPT
"${wsjtx_BINARY_DIR}/postflight.sh")
set (CMAKE_POSTUPGRADE_SCRIPT
"${wsjtx_BINARY_DIR}/postupgrade.sh")
configure_file ("${wsjtx_SOURCE_DIR}/Darwin/postflight.sh.in"
"${CMAKE_POSTFLIGHT_SCRIPT}")
configure_file ("${wsjtx_SOURCE_DIR}/Darwin/postupgrade.sh.in"
"${CMAKE_POSTUPGRADE_SCRIPT}")
endif ()
#
# bundle fixup only done in non-Debug configurations
#
if (NOT is_debug_build)
# add this sub-sirectory after all install steps and other
# sub-directories to ensure that all executables are in-place before
# any fixup is done
add_subdirectory (bundle_fixup)
endif ()
#
# packaging
#
set (CPACK_PACKAGE_DESCRIPTION_FILE "${CMAKE_SOURCE_DIR}/package_description.txt")
set (CPACK_MONOLITHIC_INSTALL 1)
set (CPACK_PACKAGE_NAME "${CMAKE_PROJECT_NAME}")
set (CPACK_PACKAGE_VERSION_MAJOR ${PROJECT_VERSION_MAJOR})
set (CPACK_PACKAGE_VERSION_MINOR ${PROJECT_VERSION_MINOR})
set (CPACK_PACKAGE_VERSION_PATCH "${PROJECT_VERSION_PATCH}${BUILD_TYPE_REVISION}")
if (WIN32)
set (CPACK_GENERATOR "NSIS")
elseif (APPLE)
set (CPACK_GENERATOR "DragNDrop")
else ()
find_program (DPKG_BUILDER dpkg-buildpackage DOC "Debian package builder")
if (DPKG_BUILDER)
#
# Derive the correct filename for a Debian package because the DEB
# generator doesn't do this correctly at present.
#
find_program (DPKG_PROGRAM dpkg DOC "dpkg program of Debian-based systems")
if (DPKG_PROGRAM)
execute_process (
COMMAND ${DPKG_PROGRAM} --print-architecture
OUTPUT_VARIABLE CPACK_DEBIAN_PACKAGE_ARCHITECTURE
OUTPUT_STRIP_TRAILING_WHITESPACE
)
else (DPKG_PROGRAM)
set (CPACK_DEBIAN_PACKAGE_ARCHITECTURE noarch)
endif (DPKG_PROGRAM)
list (APPEND CPACK_GENERATOR "DEB")
endif (DPKG_BUILDER)
find_program (RPMBUILDER rpmbuild DOC "RPM package builder")
if (RPMBUILDER)
list (APPEND CPACK_GENERATOR "RPM")
endif (RPMBUILDER)
endif ()
set (CPACK_DEBIAN_PACKAGE_HOMEPAGE "${PROJECT_HOMEPAGE}")
set (CPACK_DEBIAN_PACKAGE_DEPENDS "libgfortran5 (>=8.3) | libgfortran4 (>=7.3) | libgfortran3 (>=6.3), libfftw3-single3 (>=3.3), libgomp1 (>=6), libqt5serialport5 (>=5.7), libqt5multimedia5-plugins (>=5.7), libqt5widgets5 (>=5.7), libqt5network5 (>=5.7), libqt5printsupport5 (>=5.7), libqt5sql5-sqlite (>=5.7), libusb-1.0-0 (>=1.0.21), libboost-log1.62.0 (>=1.62.0) | libboost-log1.65.1 (>=1.65.1) | libboost-log1.67.0 (>=1.67.0) | libboost-log1.71.0 (>=1.71.0) | libboost-log1.74.0 (>=1.74.0)")
set (CPACK_DEBIAN_PACKAGE_SHLIBDEPS ON)
set (CPACK_RPM_PACKAGE_ARCHITECTURE ${CMAKE_SYSTEM_PROCESSOR})
set (CPACK_RPM_PACKAGE_REQUIRES "qt5-qtbase >= 5.9, qt5-qtserialport >= 5.9, qt5-qtmultimedia >= 5.9, qt5-qtsvg >= 5.9, libusbx >= 1.0.22, libgfortran >= 7, libgomp >= 7, fftw-libs-single >= 3.3, boost-log >= 1.62")
set (CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION /usr/share/pixmaps /usr/share/applications /usr/share/man /usr/share/man1)
configure_file ("${PROJECT_SOURCE_DIR}/CMakeCPackOptions.cmake.in"
"${PROJECT_BINARY_DIR}/CMakeCPackOptions.cmake" @ONLY)
set (CPACK_PROJECT_CONFIG_FILE "${PROJECT_BINARY_DIR}/CMakeCPackOptions.cmake")
include (CPack)