mirror of
https://github.com/saitohirga/WSJT-X.git
synced 2024-11-29 07:39:43 -05:00
47 lines
2.1 KiB
Plaintext
47 lines
2.1 KiB
Plaintext
// Status=review
|
|
|
|
The WSJT-X Wide Graph window displays the frequency spectrum of the received audio. Usually, the
|
|
upper portion of the window shows a waterfall plot of the frequency spectrum (a spectrogram) and
|
|
a line plot of the current or average spectrum. Controls at the bottom of the window are used to
|
|
set up the displayed audio frequency range, color palette, and scaling of the spectrum displays.
|
|
A control on the bottom right of the Wide Graph (displayed as *Spec nn%*) lets you control
|
|
the vertical fraction of the window occupied by the spectrum line plot.
|
|
It is important to set appropriate lower and upper
|
|
audio frequency limits for the Wide Graph because these limits define the FT8 decoder's search window.
|
|
For this tutorial, the limits will be set to cover 100-3300 Hz:
|
|
|
|
- Set *Start* = 100 Hz.
|
|
- Set *Bins/Pixel* = 5. Smaller/larger values make the Wide Graph cover a smaller/larger
|
|
frequency range.
|
|
- Use the mouse to grab the left or right edge of the *Wide Graph*, and
|
|
adjust its width so that the upper frequency limit is about 3300 Hz.
|
|
|
|
The *N Avg* setting controls how many spectra are averaged to produce each line in the spectrogram.
|
|
Smaller values make the spectrogram update more frequently, resulting in signals being more spread
|
|
out in the vertical (time) direction.
|
|
On the other hand, larger values make it easier to detect very weak signals:
|
|
|
|
- Set *N Avg* = 2.
|
|
|
|
The *Palette* setting controls the color scheme used for the spectrogram:
|
|
|
|
- Set *Palette* = Fldigi
|
|
|
|
When *Flatten* is checked, WSJT-X attempts to correct for slope or curvature in the receiver's
|
|
passband shape.
|
|
|
|
- *Flatten* = checked
|
|
|
|
The line plot can be set to display the current (un-averaged) spectrum or the cumulative (averaged)
|
|
spectrum:
|
|
|
|
- Select *Cumulative* for data display
|
|
- Set the *Gain* and *Zero* sliders for the waterfall and spectrum to near midscale
|
|
|
|
The *Spec nn%* setting determines what fraction of the vertical extent of the Wide Graph will
|
|
be used for the line plot of the spectrum. Setting *Spec* to 0 will eliminate the line plot and
|
|
a setting of 100 will eliminate the spectrogram and show only the line plot:
|
|
|
|
- Set *Spec* = 50%
|
|
|