WSJT-X/map65a.f90
Joe Taylor 2e374d3155 Clean up newdat and ndecoding stuff.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/map65@422 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2007-06-26 20:04:39 +00:00

306 lines
9.1 KiB
Fortran

subroutine map65a(newdat)
! Processes timf2 data from Linrad to find and decode JT65 signals.
parameter (MAXMSG=1000) !Size of decoded message list
parameter (NFFT=32768) !Half symbol = 17833 samples;
real savg(4,NFFT)
real tavg(-50:50) !Temp for finding local base level
real base(4) !Local basel level at 4 pol'ns
real tmp (200) !Temp storage for pctile sorting
real short(3,NFFT) !SNR dt ipol for potential shorthands
real sig(MAXMSG,30) !Parameters of detected signals
real a(5)
character*22 msg(MAXMSG)
character*3 shmsg0(4),shmsg
integer indx(MAXMSG),nsiz(MAXMSG)
logical done(MAXMSG)
logical even
character decoded*22,blank*22
include 'datcom.f90'
common/spcom/ip0,ss(4,322,NFFT),ss5(322,NFFT)
data blank/' '/
data shmsg0/'ATT','RO ','RRR','73 '/
data nfile/0/,nutc0/-999/,nid/0/,ip000/1/,ip001/1/
include 'gcom2.f90'
save
pctlost=nlost/331.03
if(nlost.ne.0) write(*,1001) nutc,nlost,pctlost
1001 format('UTC:',i5.4,' Lost packets:',i6,', or',f6.1,' %')
even=mod(nutc,2).eq.0
rewind 11
rewind 12
if(nutc.ne.nutc0) nfile=nfile+1
nutc0=nutc
nutcdata=nutc
write(utcdata,1002) nutc
1002 format(i4.4)
utcdata=utcdata(1:2)//':'//utcdata(3:4)
open(23,file='CALL3.TXT',status='old')
fselect=mousefqso + 1.6
df=96000.0/NFFT !df = 96000/NFFT = 2.930 Hz
fa=0.0
fb=60000.0
ia=nint((fa+23000.0)/df + 1.0) ! 23000 = 48000 - 25000
ib=nint((fb+23000.0)/df + 1.0)
ftol=0.020 !Frequency tolerance (kHz)
kk=0
nkk=1
nz=n/8
! nfilt=2 should be faster (but doesn't work quite right?)
nfilt=1 !nfilt=2 is faster for selected freq
do kpol=0,3
freq=fselect + 0.001*mousedf
if(even) ip0=ip000+kpol
if(.not.even) ip0=ip001+kpol
if(ip0.gt.4) ip0=ip0-4
dt00=2.314240
dt=dt00
call decode1a(id(1,1,kbuf),newdat,nfilt,freq,nflip,ip0,sync2, &
a,dt,pol,nkv,nhist,qual,decoded)
nsync1=0
nsync2=nint(10.0*log10(sync2)) - 40 !### empirical ###
ndf=nint(a(1)) + mousedf
nw=0
if(nkv.gt.0) go to 5
enddo
5 if(even) ip000=ip0
if(.not.even) ip001=ip0
nkHz=nint(freq-1.600)
npol=nint(57.2957795*pol)
nqual=qual
if(nflip.eq.-1) then !Should this be in decode1a ?
do i=22,9,-1
if(decoded(i:i).ne.' ') then
decoded(i+2:i+4)='OOO'
go to 6
endif
enddo
endif
6 write(11,1010) nkHz,ndf,npol,nutc,nsync2,dt,nw,decoded,nkv,nqual
1010 format(i3,i5,i4,i5.4,i4,f5.1,i3,2x,a22,2i3)
call flushqqq(11)
ndecdone=1
if(nagain.eq.1) go to 999
! if(newdat.eq.0) go to 999
! newdat=0
nfilt=1
do i=1,NFFT
short(1,i)=0.
short(2,i)=0.
short(3,i)=0.
enddo
call symspec(id(1,1,kbuf),nz,rxnoise,savg)
newspec=1
freq0=-999.
sync10=-999.
fshort0=-999.
sync20=-999.
ntry=0
do i=ia,ib !Search over freq range
freq=0.001*((i-1)*df - 23000) + 100.0
! Find the local base level for each polarization; update every 10 bins.
if(mod(i-ia,10).eq.0) then
do jp=1,4
do ii=-50,50
tavg(ii)=savg(jp,i+ii)
enddo
call pctile(tavg,tmp,101,50,base(jp))
enddo
endif
! Find max signal at this frequency
smax=0.
do jp=1,4
if(savg(jp,i)/base(jp).gt.smax) smax=savg(jp,i)/base(jp)
enddo
if(smax.gt.1.1) then
ntry=ntry+1
! Look for JT65 sync patterns and shorthand square-wave patterns.
call ccf65(ss(1,1,i),sync1,ipol,dt,flipk, &
syncshort,snr2,ipol2,dt2)
shmsg=' '
! Is there a shorthand tone above threshold?
if(syncshort.gt.1.0) then
! ### Do shorthand AFC here (or maybe after finding a pair?) ###
short(1,i)=syncshort
short(2,i)=dt2
short(3,i)=ipol2
! Check to see if lower tone of shorthand pair was found.
do j=2,4
i0=i-nint(j*53.8330078/df)
! Should this be i0 +/- 1, or just i0?
! Should we also insist that difference in DT be either 1.5 or -1.5 s?
if(short(1,i0).gt.1.0) then
fshort=0.001*((i0-1)*df - 23000) + 100.0
! Keep only the best candidate within ftol.
if(fshort-fshort0.le.ftol .and. sync2.gt.sync20 &
.and. nkk.eq.2) kk=kk-1
if(fshort-fshort0.gt.ftol .or. &
sync2.gt.sync20) then
kk=kk+1
sig(kk,1)=nfile
sig(kk,2)=nutc
sig(kk,3)=fshort
sig(kk,4)=syncshort
sig(kk,5)=dt2
sig(kk,6)=45*(ipol2-1)/57.2957795
sig(kk,7)=0
sig(kk,8)=snr2
sig(kk,9)=0
sig(kk,10)=0
! sig(kk,11)=rms0
sig(kk,12)=savg(ipol2,i)
sig(kk,13)=0
sig(kk,14)=0
sig(kk,15)=0
sig(kk,16)=0
! sig(kk,17)=0
sig(kk,18)=0
msg(kk)=shmsg0(j)
fshort0=fshort
sync20=sync2
nkk=2
endif
endif
enddo
endif
! Is sync1 above threshold?
if(sync1.gt.1.0) then
! Keep only the best candidate within ftol.
! (Am I deleting any good decodes by doing this? Any harm in omitting
! these statements??)
if(freq-freq0.le.ftol .and. sync1.gt.sync10 .and. &
nkk.eq.1) kk=kk-1
if(freq-freq0.gt.ftol .or. sync1.gt.sync10) then
nflip=nint(flipk)
call decode1a(id(1,1,kbuf),newdat,nfilt,freq,nflip,ipol, &
sync2,a,dt,pol,nkv,nhist,qual,decoded)
! i9=index(decoded,'AA1YN')
! if(i9.gt.0) print*,i,i9,fselect,freq,decoded
kk=kk+1
sig(kk,1)=nfile
sig(kk,2)=nutc
sig(kk,3)=freq
sig(kk,4)=sync1
sig(kk,5)=dt
sig(kk,6)=pol
sig(kk,7)=flipk
sig(kk,8)=sync2
sig(kk,9)=nkv
sig(kk,10)=qual
! sig(kk,11)=rms0
sig(kk,12)=savg(ipol,i)
sig(kk,13)=a(1)
sig(kk,14)=a(2)
sig(kk,15)=a(3)
sig(kk,16)=a(4)
! sig(kk,17)=a(5)
sig(kk,18)=nhist
msg(kk)=decoded
freq0=freq
sync10=sync1
nkk=1
endif
endif
endif
enddo
! write(*,1010)
! Trim the list and produce a sorted index and sizes of groups.
! (Should trimlist remove all but best SNR for given UTC and message content?)
call trimlist(sig,kk,indx,nsiz,nz)
do i=1,kk
done(i)=.false.
enddo
j=0
ilatest=-1
do n=1,nz
ifile0=0
do m=1,nsiz(n)
i=indx(j+m)
ifile=sig(i,1)
if(ifile.gt.ifile0 .and.msg(i).ne.blank) then
ilatest=i
ifile0=ifile
endif
enddo
i=ilatest
if(i.ge.1) then
if(.not.done(i)) then
done(i)=.true.
nutc=sig(i,2)
freq=sig(i,3)
sync1=sig(i,4)
dt=sig(i,5)
npol=nint(57.2957795*sig(i,6))
flip=sig(i,7)
sync2=sig(i,8)
nkv=sig(i,9)
nqual=min(sig(i,10),10.0)
! rms0=sig(i,11)
nsavg=sig(i,12) !Was used for diagnostic ...
do k=1,5
a(k)=sig(i,12+k)
enddo
nhist=sig(i,18)
decoded=msg(i)
if(flip.lt.0.0) then
do i=22,1,-1
if(decoded(i:i).ne.' ') go to 10
enddo
stop 'Error in message format'
10 if(i.le.18) decoded(i+2:i+4)='OOO'
endif
nkHz=nint(freq-1.600)
f0=144.0+0.001*nkHz
ndf=nint(1000.0*(freq-1.600-nkHz))
ndf0=nint(a(1))
ndf1=nint(a(2))
ndf2=nint(a(3))
nsync1=sync1
nsync2=nint(10.0*log10(sync2)) - 40 !### empirical ###
write(26,1014) f0,ndf,ndf0,ndf1,ndf2,dt,npol,nsync1, &
nsync2,nutc,decoded,nkv,nqual,nhist
write(21,1014) f0,ndf,ndf0,ndf1,ndf2,dt,npol,nsync1, &
nsync2,nutc,decoded,nkv,nqual,nhist
1014 format(f7.3,i5,3i3,f5.1,i5,i3,i4,i5.4,2x,a22,3i3)
endif
endif
j=j+nsiz(n)
enddo
call display
ndecdone=2
if(nsave.gt.0) call savetf2(id(1,1,kbuf),nsave,nutc)
999 nagain=0
close(23)
return
end subroutine map65a