Joe Taylor 2e4a6c3c32 If DX grid is blank, set DX astro params to zero. Do this in astrosub.f90, not asstro.cpp!		2022-07-17 16:12:59 -04:00
..
77bit	Merge branch 'develop' into feat-ft8-q3	2022-01-07 11:38:10 -05:00
fst4	FST4/W: Disable envelope shaping at start and end of transmission when environment variable FST4_NOSHAPING=1. Works for fst4sim too.	2021-01-25 15:52:07 +00:00
ft2	Merge branch 'master' of ../map65 into feat-map65-integration	2021-04-09 14:00:10 +01:00
ft4	Re-enable EU VHF Contest mode messages in MSK144 mode	2021-02-24 02:21:31 +00:00
ft8	Make minimum SNR -24 dB for a7 decodes.	2022-03-26 18:44:59 -05:00
ftrsd	Prevent a divide-by-0 error in ftrsd2.c.	2021-04-26 08:08:27 -05:00
qra	Remove the SNR adjustment for Q65 averaged decodes. It does not seem to work as expected.	2022-03-08 11:48:54 -05:00
qso50	Test program to exercise features of the "WSPR QSO mode" that was tested briefly in 2008.	2018-01-31 15:45:06 +00:00
wsprcode	Squash some more warnings	2020-05-09 00:54:53 +01:00
wsprd	Make wspr mode work properly with 3 character callsigns like N1D.	2022-04-22 07:56:02 -05:00
addit.f90	Update allsim.f90 and addit.f90 for the new FT8 and FT4 waveforms.	2019-12-04 15:44:38 -05:00
afc9.f90
afc65b.f90	Silence compiler warnings.	2020-03-19 09:23:35 -04:00
all_fft.out
allsim.f90	Update allsim.f90: add FST4-60, replace QRA64 with Q65-60A.	2021-03-23 15:18:06 -04:00
ana64.f90	First working multi-decode procedure for Q65.	2021-02-01 13:28:59 -05:00
ana932.f90
analytic.f90	Make default MSK144 amplitude polynomial flat.	2017-08-14 15:00:48 +00:00
astro0.f90	Let Echo-mode "Measure" function use the computed fspread for DX grid.	2022-06-22 14:34:50 -04:00
astro.f90
astrosub.f90	If DX grid is blank, set DX astro params to zero. Do this in astrosub.f90, not asstro.cpp!	2022-07-17 16:12:59 -04:00
avecho.f90	Let Echo-mode "Measure" function use the computed fspread for DX grid.	2022-06-22 14:34:50 -04:00
averms.f90	Tweak subroutine averms(). Add test program test_snr to exercise new algorithm for echo snr.	2022-04-22 11:02:47 -04:00
avg4.f90
azdist.f90	Workaround for a crash on macOS when compiling with gfortran 8.3	2019-04-30 15:13:26 +01:00
baddata.f90
badmsg.f90
blanker.f90	Remove two disused lines of code.	2021-01-07 13:37:12 -05:00
bpdecode40.f90
bpdecode128_90.f90	Silence compiler warnings.	2020-03-19 11:00:21 -04:00
bpdecode128_90.f90.save	Working toward whole-hog switchover to new LDPC code with 77 bit messages in MSK144.	2018-07-07 09:44:52 -05:00
bpdecode144.f90
C_interface_module.f90	Fix filename case issue	2020-07-20 23:53:29 +01:00
calibrate.f90	Use local 8-bit strings for paths passed to Fortran	2021-08-22 13:24:03 +01:00
ccf2.f90	Minor tweaks to JT65 decoding.	2017-11-28 20:46:00 +00:00
ccf65.f90
char.h
chkcall.f90	Fix the issue with using 'QQ0XYZ' in ft8_a7.f90.	2022-02-17 10:17:47 -05:00
chkfft2.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
chkfft3.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
chkfft.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
chkfft.txt
chkhist.f90
chkmsg.f90
chkss2.f90
code426.f90
constants.f90	Larger 12kHz sample buffer	2020-07-17 19:08:21 +01:00
contest72.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
conv232.f90
coord.f90
count4.f90
CQnnnCAT.txt
crc10.cpp	Improve support for older C++ compilers	2017-07-16 14:32:28 +00:00
crc13.cpp	Add routines that will implement 77-bit messages for MSK144. Initial tests will use a (128,90) code.	2018-06-13 09:40:04 -05:00
crc14.cpp	Add crc14.cpp	2018-03-22 14:18:14 +00:00
crc.f90	Housekeeping. Remove unused code and unused variables. Silence some compiler warnings.	2018-12-05 16:06:33 -06:00
db.f90
decode4.f90
decode9w.f90	New simulator jt49sim, replaces both jt4sim and jt9sim. Fix the S/N estimates made for slow/wide JT9 submodes.	2018-04-25 17:24:58 +00:00
decode65a.f90	Remove more timer calls that are essentially moot.	2021-05-13 16:34:47 -04:00
decode65b.f90	Fix a problem with turning DS on/off in JT65.	2020-04-08 21:47:10 -04:00
decode_rs.c
decoder.f90	Add GUI controls to set max_drift in both WSJT-X and MAP65.	2021-05-30 12:07:48 -04:00
deep4.f90
deg2grid.f90
degrade_snr.f90	Limit WSPR-LF frequency search range to 1600-1650 Hz. Enable S/N degradation.	2017-05-18 15:59:30 +00:00
demod64a.f90	Experimental changes to JT65 decoder:	2017-10-22 00:09:01 +00:00
determ.f90
digi-contest.txt	Update the contest ideas.	2018-06-14 11:31:16 -04:00
downsam9.f90
dxped_fifo.f90	New versions of Fox test proigs.	2017-11-09 20:23:04 +00:00
DXped_Operations.txt	Update the DXped_Op document.	2017-11-22 15:30:28 +00:00
DXped_pseudo_code.txt	Make bDXped a member variable, default to false.	2017-09-25 19:21:25 +00:00
echo_snr.f90	Integrate the new Echo SNR algorithm into WSJT-X.	2022-04-22 15:34:12 -04:00
emedop.dat	We might possibly want to use "emedop" again...	2018-10-03 20:10:51 +01:00
emedop.f90	We might possibly want to use "emedop" again...	2018-10-03 20:10:51 +01:00
encode4.f90	Old-style "NA VHF Contest" mode removed from all Fortran routines.	2018-07-10 15:09:42 -04:00
encode232.f90
encode_128_90.f90	Working toward whole-hog switchover to new LDPC code with 77 bit messages in MSK144.	2018-07-07 09:44:52 -05:00
encode_msk40.f90
encode_rs.c	Merge branch 'master' of ../map65 into feat-map65-integration	2021-04-09 14:00:10 +01:00
entail.f90
ephem.f90
extract4.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
extract.f90	Fix another piece of flaky behavior with Deep Search average decodes.	2020-04-09 15:30:12 -04:00
extractmessage77.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
fano232.f90	Silence compiler warnings.	2020-03-19 11:19:44 -04:00
fast9.f90
fast_decode.f90	Cleaning up some build scripts and fixing compiler warnings.	2021-04-22 13:12:55 -04:00
fcal.f90
fchisq0.f90
fchisq65.f90
fchisq.f90
fer
fer65.f90
fersum.f90
fftw3.f03
fftw3.f90
fftw3mod.f90
fil3.f90	Silence compiler warnings.	2020-03-19 11:19:44 -04:00
fil3c.f90	Silence compiler warnings.	2020-03-19 11:19:44 -04:00
fil4.f90
fil61.f90
fil6521.f90	Silence compiler warnings.	2020-03-19 11:19:44 -04:00
filbig.f90	Silence compiler warnings.	2020-03-19 11:19:44 -04:00
fitcal.f90	Functional 'Solve for calibration parameters' on Tools menu.	2017-09-28 01:35:09 +00:00
fix_contest_msg.f90	Working on some features for NA VHF contests. Not finished!	2017-07-27 20:17:30 +00:00
fixwav.f90
flat1.f90
flat1a.f90
flat1b.f90
flat2.f90
flat4.f90
flat65.f90
fmeasure.f90	First tests of "RR73 NOW ..." and "NIL NOW ..." (i3bit=1, 2) messages in FT8.	2017-09-25 17:02:52 +00:00
fmtave.f90
fmtmsg.f90	Make fmtmsg aware of both message sizes, 22 and 37 chars.	2018-12-05 08:19:59 -05:00
foldspec9f.f90
four2a.f90	Further refinements to complex to real FFT initialization	2021-10-20 19:28:58 +01:00
fox_rx.f90	More code cleanup.	2017-11-09 21:33:20 +00:00
fox_sim.f90	Add column headings...	2017-11-10 15:02:47 +00:00
fox_tx.f90	'Experimental	2017-11-10 02:14:26 +00:00
fqso_first.f90
freqcal.f90	Try to avoid a crash in freqcal.f90 when data is all zeros.	2019-05-11 09:36:15 -05:00
fst4_decode.f90	Fis a few more compiler warnings.	2021-04-22 14:08:53 -04:00
fst280_decode.f90	Adjust analysis window when single-decode is checked.	2020-06-26 08:40:01 -05:00
ft4_decode.f90	Make sure that mycall13 and dxcall13 are initialized in FT4 mode.	2020-05-21 12:13:12 -05:00
ft8_decode.f90	Fix a bounds error.	2022-03-07 11:46:29 -05:00
g1
g1.bat
g2.bat
g3.bat
g4.bat
gen4.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
gen9.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
gen65.f90	Use BIND(C) for gen65.f90, and pass strings in/out as character*1 arrays. Please test on macOS!	2022-01-31 19:18:46 -05:00
genmet.f90
genmsk40.f90	Fix bug that prevented generation of MSK144 Sh messages with extended callsign. Change all MSK144 Sh code to use 12-char mycall and hiscall and 37-char messages. Hash full extended callsigns (not just base call) and print full callsigns, e.g. <KP4/K1JT K9AN> RRR	2018-10-05 20:56:22 -05:00
genmsk_128_90.f90	Use separate hash tables for 10, 12, and 22 bit hashes. Make unpacking i3=4 messages depend on whether unpack is being done on a received message, or a to-be-transmitted message. Give mycall13 priority over hash table entries in certain contexts.	2018-12-20 15:08:29 -06:00
genqra64.f90	Mostly(?) changed QRA66 to QRA65 on the Fortran side.	2020-09-25 12:21:57 -04:00
genwave.f90	Use genwave() to create Q65 audio signal. Send "include averaging" flag to Q65 decoder.	2020-11-11 11:14:02 -05:00
genwspr.f90
geodist.f90
getlags.f90
getmet4.f90
go_chkfft.cmd
golay24_table.c
gran.c	Add new function needed for FST4W decoder updates	2021-01-04 15:35:32 +00:00
graycode65.f90
graycode.f90
grayline.f90
grid2deg.f90	Satisfy the fussy compiler on macOS.	2022-07-05 14:01:22 -04:00
hash.f90
hashing.f90
hint65.f90	Code cleanup in hint65.f90. Remove the warning about short or missing CALL3.TXT.	2020-04-28 11:37:59 -04:00
hspec.f90	Use local 8-bit strings for paths passed to Fortran	2021-08-22 13:24:03 +01:00
igray.c
image.f90
indexx.f90
init_random_seed.c
init_random_seed.f90
init_random_seed.h
init_rs.c	Getting compilation of map65 working with CMake and Qt 5.15	2021-04-09 17:47:49 +01:00
int.h
inter_wspr.f90
interleave4.f90
interleave8.f90
interleave9.f90
interleave63.f90
iso_c_utilities.f90
jplsubs.f
jt4_decode.f90	Clean up the formation and display of JT4 average and DS decodes.	2020-04-17 12:14:43 -04:00
jt4.f90
jt4a.f90
jt4code.f90
jt4sim.f90
jt9_decode.f90
jt9.f90	Automatic FFTW3 wisdom handling for map65 GUI and shmem m65 runs	2021-05-13 12:44:32 +01:00
jt9a.f90	FT8 decodes with data read from disk and nagain=.true. should decode only at RxFreq.	2021-07-28 13:06:07 -04:00
jt9code.f90	Fix minor flaws in reporting bad messages by jt65code and jt9code.	2018-08-31 11:22:06 -04:00
jt9com.f90	Add GUI controls to set max_drift in both WSJT-X and MAP65.	2021-05-30 12:07:48 -04:00
jt9fano.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
jt9sim.f90
jt9sync.f90
jt9w.f90
jt49sim.f90	Silence some compiler warning messages.	2020-05-17 14:09:25 -04:00
jt65_decode.f90	Protect against NaN in savg() after switch from Q65 to JT65 mode.	2021-10-19 10:01:47 -04:00
jt65_mod.f90
jt65_test.f90	Experimental implementation of AP decoding for JT65 - configured for testing only. Not usable on the air.	2017-11-04 17:03:56 +00:00
jt65.f90	Experimental implementation of AP decoding for JT65 - configured for testing only. Not usable on the air.	2017-11-04 17:03:56 +00:00
jt65code.f90	Fix minor flaws in reporting bad messages by jt65code and jt9code.	2018-08-31 11:22:06 -04:00
jt65sim.f90	Fix bugs for generating and decoding JT65 shorthand messages.	2020-05-07 13:54:02 -04:00
jtmsg.f90	Prevent a certain type of non-standard message from being flagged as a false decode.	2017-07-22 13:21:03 +00:00
ldpc32_table.c
ldpc_128_90_b_generator.f90	Add 'code b' - a better (128,90) code. Code b has irregular column weights - 80% weight 3 and 20% weight 4.	2018-06-14 15:38:58 -05:00
ldpc_128_90_b_reordered_parity.f90	Add 'code b' - a better (128,90) code. Code b has irregular column weights - 80% weight 3 and 20% weight 4.	2018-06-14 15:38:58 -05:00
ldpc_128_90_generator.f90	Add routines that will implement 77-bit messages for MSK144. Initial tests will use a (128,90) code.	2018-06-13 09:40:04 -05:00
ldpc_128_90_reordered_parity.f90	Add routines that will implement 77-bit messages for MSK144. Initial tests will use a (128,90) code.	2018-06-13 09:40:04 -05:00
ldpcsim40.f90	Bring ldpcsim40.f90 up to date and add coherent averaging option to both ldpcsim144 and ldpcsim40. These routines simulate only the performance of the code and the hash/CRC.	2017-02-26 20:14:51 +00:00
ldpcsim128_90.f90	Experimental change to enable OSD decoding for MSK144 when ntol .le. 50 Hz	2020-02-13 08:48:51 -06:00
libration.f90
lorentzian.f90	Code cleanup.	2020-10-04 15:32:08 -04:00
lpf1.f90	More cleanup to satisfy fussy gcc 10 compiler.	2020-02-21 13:36:49 -05:00
makepings.f90	Allow msk144sim[.exe] to generate files with length 5, 10, 15, and 30 s.	2021-09-14 14:09:54 -04:00
map65_mmdec.f90	Add GUI controls to set max_drift in both WSJT-X and MAP65.	2021-05-30 12:07:48 -04:00
met8.21
mixlpf.f90
moondopjpl.f90
morse.f90	Guard against callsigns longer that the CW id buffer	2021-03-23 15:07:32 +00:00
move.f90
msgs.txt
msk40_freq_search.f90
msk40decodeframe.f90	Fix up some compiler errors when using gfortran v9	2019-02-10 20:43:51 +00:00
msk40spd.f90	Fix bug that prevented generation of MSK144 Sh messages with extended callsign. Change all MSK144 Sh code to use 12-char mycall and hiscall and 37-char messages. Hash full extended callsigns (not just base call) and print full callsigns, e.g. <KP4/K1JT K9AN> RRR	2018-10-05 20:56:22 -05:00
msk40sync.f90
msk144_freq_search.f90
msk144_testmsg.f90	Make msk144code work. Rename msk144d2 to msk144d and make it work too.	2018-10-19 19:42:31 -05:00
msk144code.f90	Re-enable EU VHF Contest mode messages in MSK144 mode	2021-02-24 02:21:31 +00:00
msk144decodeframe.f90	Re-enable EU VHF Contest mode messages in MSK144 mode	2021-02-24 02:21:31 +00:00
msk144signalquality.f90	Use local 8-bit strings for paths passed to Fortran	2021-08-22 13:24:03 +01:00
msk144sim.f90	Allow msk144sim[.exe] to generate files with length 5, 10, 15, and 30 s.	2021-09-14 14:09:54 -04:00
msk144spd.f90	Silence compiler warnings.	2020-03-19 11:58:36 -04:00
msk144sync.f90	Workaround for some memory issues, possibly thread stack sizing	2020-10-07 13:12:20 +01:00
mskber.f90
mskdt.f90
mskrtd.f90	Use local 8-bit strings for paths passed to Fortran	2021-08-22 13:24:03 +01:00
nfft.dat
nfft.out	Save fsk4sim.f90 with 3 @ 4x4 sync arrays.	2017-03-30 19:24:20 +00:00
noisegen.f90
nuttal_window.f90	Make FT4 AP decoding work in RTTY RU and Field Day activities.	2019-03-03 13:02:22 -06:00
options.f90
osd128_90.f90	Silence compiler warnings; reformmat some source code.	2020-03-19 13:13:33 -04:00
packjt.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
pctile.f90	Fix one more compiler warning.	2021-01-07 10:18:38 -06:00
peakdt9.f90
peakup.f90
pfx.f90
platanh.f90	Remove obsolete routines related to msk144.	2018-11-23 15:10:44 -06:00
plotsave.f90	Fix allocation logic for allocatable array sw.	2018-01-26 18:41:09 +00:00
pltanh.f90	Remove obsolete routines related to msk144.	2018-11-23 15:10:44 -06:00
polyfit.f90
prcom.f90
prog_args.f90
ps4.f90
psk_parse.f90	Utility program to parse Phil Gladstone's raw-data file from PSKreporter.	2017-03-01 17:40:25 +00:00
ptt.c
q65_decode.f90	W3SZ patch: Initialize AP params and set npasses=2 before first call to q65_dec0().	2022-01-07 09:59:15 -06:00
q65params.f90	Update q65params.f90.	2020-12-05 11:03:16 -05:00
qra64code.f90	clean up a few warnings	2019-07-01 21:10:43 -05:00
qratest.f90	Silence compiler warnings; reformmat some source code.	2020-03-19 13:13:33 -04:00
readwav.f90	Use LU=26 in readwav.f90.	2019-06-04 10:39:43 -04:00
rectify_msk.f90
refspectrum.f90	Make checking "Ref Spec" without a refspec.dat file into a NOP.	2020-05-18 14:21:55 -04:00
rig_control.c
rs.h
rtty_spec.f90	Adjustments to utility program rtty_spec.f90	2019-06-13 11:07:29 -04:00
save_dxbase.f90	Add the $DXCALL macro capability.	2021-12-06 11:12:10 -05:00
savec2.f90
sec0.f90	Add a simple execution timer for small blocks of code.	2020-07-22 10:43:33 -04:00
sec_midn.f90
setup65.f90
sfrsd.f90
sgran.c
sh65.f90	Fix bugs for generating and decoding JT65 shorthand messages.	2020-05-07 13:54:02 -04:00
sh65snr.f90
shell.f90
shmem.cpp	Cleanup and refactor Fortran shared memory usage	2020-03-16 13:58:38 +00:00
shmem.f90	Add missed file to repo	2020-03-16 14:39:42 +00:00
slasubs.f
sleep_msec.f90
sleep.h
slope.f90	Minor tweaks to JT65 decoding.	2017-11-28 20:46:00 +00:00
smo121.f90
smo.f90
smolorentz.f90
softsym9f.f90
softsym9w.f90	New simulator jt49sim, replaces both jt4sim and jt9sim. Fix the S/N estimates made for slow/wide JT9 submodes.	2018-04-25 17:24:58 +00:00
softsym.f90
sort.f90
spec9f.f90
spec64.f90	One more attempt at fixing the bounds errors in spec64.	2021-06-30 14:49:00 -04:00
spec_qra65.f90	Allocate some big arrays on the heap.	2020-10-17 13:16:46 -04:00
ss.bat
stats.f90
stdmsg.f90	Diagnostic write should include callsign hash vlues.	2018-09-21 11:13:01 -04:00
subtract65.f90
sumsim.f90	Reactivate Q65 message averaging, and fix the reporting of those decodes.	2020-11-10 10:14:41 -05:00
sun.f90
symspec2.f90
symspec65.f90	Minor tweaks to JT65 decoding.	2017-11-28 20:46:00 +00:00
symspec.f90	Remove the diagnostic routine chk_samples().	2021-04-22 13:17:30 -04:00
sync4.f90	Fix a mis-spelled warning message.	2021-02-20 08:39:53 -06:00
sync9.f90
sync9f.f90
sync9w.f90
sync65.f90	Code cleanup.	2020-04-30 16:54:53 -04:00
syncmsk.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
tab.c
test_init_random_seed.f90
test_q65.f90	Make test_q65 execute jt9 with the single_decode ('-X 32') flag set.	2021-06-08 11:12:42 -04:00
test_qra64.f90	Change the Q65 value of nsps from 7680 to 7200.	2020-10-25 14:10:38 -04:00
test_snr.f90	Final (?) version of test_snr, with echo_snr() moved into wsjt Fortran library.	2022-04-22 13:07:23 -04:00
testfast9.f90
testmsg.f90	Fix minor flaws in reporting bad messages by jt65code and jt9code.	2018-08-31 11:22:06 -04:00
timefft_opts.f90
timefft.f90
timer_C_wrapper.f90
timer_common.inc
timer_impl.f90	Prepare for doing AP=012 decodes from s1a.	2021-01-14 15:52:51 -05:00
timer_module.f90
timf2.f90	More cleanup to satisfy fussy gcc 10 compiler.	2020-02-21 13:36:49 -05:00
tmoonsub.c
to_contest_msg.f90	Working on some features for NA VHF contests. Not finished!	2017-07-27 20:17:30 +00:00
tstrig.c
tstrig.h
tweak1.f90
twkfreq65.f90
twkfreq.f90	Add comments to define units for a(1), a(2).	2021-05-29 13:16:09 -04:00
types.f90	Improved C/Fortran string interoperation, and fix azel.dat updates	2020-07-20 15:15:55 +01:00
update_msk40_hasharray.f90	Use separate hash tables for 10, 12, and 22 bit hashes. Make unpacking i3=4 messages depend on whether unpack is being done on a received message, or a to-be-transmitted message. Give mycall13 priority over hash table entries in certain contexts.	2018-12-20 15:08:29 -06:00
update_recent_calls.f90
usleep.c
vit213.c
vit216.c
wav11.f90	Fix a bug in wav11.f90.	2020-05-07 11:33:06 -04:00
wav12.f90	More cleanup to satisfy fussy gcc 10 compiler.	2020-02-21 13:36:49 -05:00
wavhdr.f90	Add parameters for FT8 and Ft2 to wavhdr.f90.	2019-01-18 07:45:59 -05:00
wisdom1.bat
wisdom.c
wqdecode.f90	Silence compiler warnings.	2020-03-19 13:45:13 -04:00
wqencode.f90	Enhance packjt77 to include 50-bit WSPR-style messages. Build encode77[.exe].	2020-03-30 13:37:34 -04:00
wrapkarn.c
wsjt_modes.txt
wspr_downsample.f90
xcall.txt	Add data file for fox_sim.	2017-11-10 13:16:43 +00:00
xcor4.f90	Protect against a bounds error.	2018-08-31 13:55:44 -04:00
xcor.f90	Experimental changes to JT65 decoder:	2017-10-22 00:09:01 +00:00
zplot9.f90
zplt.f90