WSJT-X/lib/fsk4hf/ft280sim.f90
2020-05-02 08:10:35 -05:00

114 lines
3.7 KiB
Fortran

program ft280sim
! Generate simulated signals for experimental slow FT4 mode
use wavhdr
use packjt77
include 'ft4s280_params.f90' !Set various constants
type(hdr) h !Header for .wav file
character arg*12,fname*17
character msg37*37,msgsent37*37
character c77*77
complex c0(0:NMAX-1)
complex c(0:NMAX-1)
real wave(NMAX)
integer itone(NN)
integer*1 msgbits(101)
integer*2 iwave(NMAX) !Generated full-length waveform
! Get command-line argument(s)
nargs=iargc()
if(nargs.ne.8) then
print*,'Usage: ft280sim "message" f0 DT h fdop del nfiles snr'
print*,'Examples: ft280sim "K1JT K9AN EN50" 1500 0.0 1.0 0.1 1.0 10 -15'
go to 999
endif
call getarg(1,msg37) !Message to be transmitted
call getarg(2,arg)
read(arg,*) f0 !Frequency (only used for single-signal)
call getarg(3,arg)
read(arg,*) xdt !Time offset from nominal (s)
call getarg(4,arg)
read(arg,*) hmod !Modulation index, h
call getarg(5,arg)
read(arg,*) fspread !Watterson frequency spread (Hz)
call getarg(6,arg)
read(arg,*) delay !Watterson delay (ms)
call getarg(7,arg)
read(arg,*) nfiles !Number of files
call getarg(8,arg)
read(arg,*) snrdb !SNR_2500
nfiles=abs(nfiles)
twopi=8.0*atan(1.0)
fs=12000.0 !Sample rate (Hz)
dt=1.0/fs !Sample interval (s)
tt=NSPS*dt !Duration of symbols (s)
baud=1.0/tt !Keying rate (baud)
txt=NZ2*dt !Transmission length (s)
bandwidth_ratio=2500.0/(fs/2.0)
sig=sqrt(2*bandwidth_ratio) * 10.0**(0.05*snrdb)
if(snrdb.gt.90.0) sig=1.0
call genft280(msg37,0,msgsent37,msgbits,itone)
write(*,*)
write(*,'(a9,a37,3x,a7,i1,a1,i1)') 'Message: ',msgsent37,'i3.n3: ',i3,'.',n3
write(*,1000) f0,xdt,hmod,txt,snrdb
1000 format('f0:',f9.3,' DT:',f6.2,' hmod:',f6.3,' TxT:',f6.1,' SNR:',f6.1)
write(*,*)
if(i3.eq.1) then
write(*,*) ' mycall hiscall hisgrid'
write(*,'(28i1,1x,i1,1x,28i1,1x,i1,1x,i1,1x,15i1,1x,3i1)') msgbits(1:77)
else
write(*,'(a14)') 'Message bits: '
write(*,'(50i1,1x,24i1)') msgbits
endif
write(*,*)
write(*,'(a17)') 'Channel symbols: '
write(*,'(10i1)') itone
write(*,*)
call sgran()
fsample=12000.0
icmplx=1
call gen_wspr4wave(itone,NN,NSPS,fsample,hmod,f0,c0,wave,icmplx,NMAX)
k=nint((xdt+1.0)/dt)-NSPS
c0=cshift(c0,-k)
if(k.gt.0) c0(0:k-1)=0.0
if(k.lt.0) c0(NMAX+k:NMAX-1)=0.0
do ifile=1,nfiles
c=c0
if(fspread.ne.0.0 .or. delay.ne.0.0) call watterson(c,NMAX,NZ,fs,delay,fspread)
c=sig*c
wave=real(c)
if(snrdb.lt.90) then
do i=1,NMAX !Add gaussian noise at specified SNR
xnoise=gran()
wave(i)=wave(i) + xnoise
enddo
endif
gain=100.0
if(snrdb.lt.90.0) then
wave=gain*wave
else
datpk=maxval(abs(wave))
fac=32766.9/datpk
wave=fac*wave
endif
if(any(abs(wave).gt.32767.0)) print*,"Warning - data will be clipped."
iwave=nint(wave)
h=default_header(12000,NMAX)
write(fname,1102) ifile
1102 format('000000_',i6.6,'.wav')
open(10,file=fname,status='unknown',access='stream')
write(10) h,iwave !Save to *.wav file
close(10)
write(*,1110) ifile,xdt,f0,snrdb,fname
1110 format(i4,f7.2,f8.2,f7.1,2x,a17)
enddo
999 end program ft280sim