Joe Taylor 3af293f297 Use module variables rather than common/hashcom/; working on transparent handling of goofy calls.		2018-07-30 15:46:25 -04:00
..
77bit	Use module variables rather than common/hashcom/; working on transparent handling of goofy calls.	2018-07-30 15:46:25 -04:00
fsk4hf	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
ft8	Minor code cleanup.	2018-07-29 17:15:02 -05:00
ftrsd	Implement AP decoding for JT65 (VHF/UHF/Microwave only).	2017-12-02 16:04:51 +00:00
qra	Patch from W9MDB: adds braces to make code in qra64.c more readable.	2017-07-07 12:55:05 +00:00
qso50	Test program to exercise features of the "WSPR QSO mode" that was tested briefly in 2008.	2018-01-31 15:45:06 +00:00
wsprcode	Updates and additions to test progams.	2017-04-27 17:43:21 +00:00
wsprd	Update a copyright notice.	2018-03-07 16:20:40 +00:00
addit.f90	Utility for generating figure for QST/RadCom article.	2017-08-01 18:01:27 +00:00
afc9.f90
afc65b.f90	Further improvements for decoding drifting JT65 signals.	2018-04-02 18:57:08 +00:00
all_fft.out
allsim.f90	First tests of "RR73 NOW ..." and "NIL NOW ..." (i3bit=1, 2) messages in FT8.	2017-09-25 17:02:52 +00:00
ana64.f90	Many adjustments to QRA64 decoder. Best performance yet on the 114 benchmark files.	2016-12-15 18:42:33 +00:00
ana932.f90
analytic.f90	Make default MSK144 amplitude polynomial flat.	2017-08-14 15:00:48 +00:00
astro0.f90
astro.f90
astrosub.f90
avecho.f90
averms.f90
avg4.f90
azdist.f90	Correct a longstanding flaw in azdist(). This change should be committed to the v1.8.1 tag.	2017-12-14 13:49:06 +00:00
baddata.f90
badmsg.f90	Correct a constant in badmsg; correct nfreq when sync fails.	2016-12-08 20:47:13 +00:00
bpdecode40.f90	Fix some typos, two of which were found by Cristo, lz2hv.	2016-09-01 14:05:53 +00:00
bpdecode128_90.f90	Working toward whole-hog switchover to new LDPC code with 77 bit messages in MSK144.	2018-07-07 09:44:52 -05:00
bpdecode128_90.f90.save	Working toward whole-hog switchover to new LDPC code with 77 bit messages in MSK144.	2018-07-07 09:44:52 -05:00
bpdecode144.f90	Add early termination code to the msk144 long-message decoder. Remove references to Radford Neal's ldpc code, which served us well but is no longer needed.	2016-09-01 21:50:52 +00:00
calibrate.f90	Add "Apply" button to calibration solution message box	2017-10-01 21:44:15 +00:00
ccf2.f90	Minor tweaks to JT65 decoding.	2017-11-28 20:46:00 +00:00
ccf65.f90
char.h
chkcall.f90	1. Alt+F8 arms "Call 1st" as if a CQ had been sent.	2017-07-20 15:15:00 +00:00
chkfft2.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
chkfft3.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
chkfft.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
chkfft.txt
chkhist.f90
chkmsg.f90	1. We did the experiment: users clearly prefer a "Prompt to log QSO"	2017-01-02 14:22:29 +00:00
chkss2.f90
code426.f90
constants.f90	Starting to implement experimental mode "WSPR-LF". Beware possible undesired side effects!	2017-04-28 16:49:09 +00:00
contest72.f90	Fix minor formatting alignments, etc.	2018-03-09 13:26:06 +00:00
conv232.f90
coord.f90
count4.f90
CQnnnCAT.txt
crc10.cpp	Improve support for older C++ compilers	2017-07-16 14:32:28 +00:00
crc12.cpp	Improve support for older C++ compilers	2017-07-16 14:32:28 +00:00
crc13.cpp	Add routines that will implement 77-bit messages for MSK144. Initial tests will use a (128,90) code.	2018-06-13 09:40:04 -05:00
crc14.cpp	Add crc14.cpp	2018-03-22 14:18:14 +00:00
crc.f90	Progress toward a working ldpc128_90 simulator. Compiles, but does not yet work.	2018-06-13 11:34:00 -05:00
db.f90
decode4.f90
decode9w.f90	New simulator jt49sim, replaces both jt4sim and jt9sim. Fix the S/N estimates made for slow/wide JT9 submodes.	2018-04-25 17:24:58 +00:00
decode65a.f90	Improve AFC action for JT65, especially submodes B and C.	2018-04-02 17:24:18 +00:00
decode65b.f90	Implement AP decoding for JT65 (VHF/UHF/Microwave only).	2017-12-02 16:04:51 +00:00
decode_rs.c
decoder.f90	Progress on AP decoding for 77bit messages. AP is basically working for regular i3=1 messages.	2018-07-28 17:32:45 -05:00
deep4.f90	Correct a flaw in deep4 (apparently caused by gfortran optimizer?). Move	2016-10-31 14:24:02 +00:00
deg2grid.f90
degrade_snr.f90	Limit WSPR-LF frequency search range to 1600-1650 Hz. Enable S/N degradation.	2017-05-18 15:59:30 +00:00
demod64a.f90	Experimental changes to JT65 decoder:	2017-10-22 00:09:01 +00:00
determ.f90
digi-contest.txt	Update the contest ideas.	2018-06-14 11:31:16 -04:00
downsam9.f90
dxped_fifo.f90	New versions of Fox test proigs.	2017-11-09 20:23:04 +00:00
DXped_Operations.txt	Update the DXped_Op document.	2017-11-22 15:30:28 +00:00
DXped_pseudo_code.txt	Make bDXped a member variable, default to false.	2017-09-25 19:21:25 +00:00
encode4.f90	Old-style "NA VHF Contest" mode removed from all Fortran routines.	2018-07-10 15:09:42 -04:00
encode232.f90
encode_128_90.f90	Working toward whole-hog switchover to new LDPC code with 77 bit messages in MSK144.	2018-07-07 09:44:52 -05:00
encode_msk40.f90
encode_msk144.f90	Add early termination code to the msk144 long-message decoder. Remove references to Radford Neal's ldpc code, which served us well but is no longer needed.	2016-09-01 21:50:52 +00:00
encode_rs.c
entail.f90
ephem.f90
extract4.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
extract.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
extractmessage77.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
extractmessage144.f90	More progress on SWL mode. Needs testing.	2017-01-01 16:34:20 +00:00
fano232.f90
fast9.f90
fast_decode.f90	Remove some dead code.	2016-12-30 20:26:59 +00:00
Fast_Modes.txt
fcal.f90	Use a sin^2 window on FFT in freqcal. Fix the table header for fcal.f90.	2017-01-10 14:51:32 +00:00
fchisq0.f90
fchisq65.f90
fchisq.f90
fer
fer65.f90
fersum.f90
fftw3.f03
fftw3.f90
fftw3mod.f90
fil3.f90
fil3c.f90
fil4.f90
fil61.f90
fil6521.f90
filbig.f90
fitcal.f90	Functional 'Solve for calibration parameters' on Tools menu.	2017-09-28 01:35:09 +00:00
fix_contest_msg.f90	Working on some features for NA VHF contests. Not finished!	2017-07-27 20:17:30 +00:00
fixwav.f90
flat1.f90
flat1a.f90
flat1b.f90
flat2.f90
flat4.f90
flat65.f90
fmeasure.f90	First tests of "RR73 NOW ..." and "NIL NOW ..." (i3bit=1, 2) messages in FT8.	2017-09-25 17:02:52 +00:00
fmtave.f90	Add the "FMT" tools; remove unnecessary references to calibration station callsigns.	2017-01-09 15:55:42 +00:00
fmtmsg.f90
foldspec9f.f90
four2a.f90
fox_rx.f90	More code cleanup.	2017-11-09 21:33:20 +00:00
fox_sim.f90	Add column headings...	2017-11-10 15:02:47 +00:00
fox_tx.f90	'Experimental	2017-11-10 02:14:26 +00:00
fqso_first.f90
freqcal.f90	Improve accuracy of frequency estimate for non-fading, phase-stable, high-SNR signals.	2017-01-12 03:48:18 +00:00
ft8_decode.f90	Use module variables rather than common/hashcom/; working on transparent handling of goofy calls.	2018-07-30 15:46:25 -04:00
g1
g1.bat
g2.bat
g3.bat
g4.bat
gen4.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
gen9.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
gen65.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
geniscat.f90
genmet.f90
genmsk40.f90	Update an ldpc-code simulation tool.	2017-02-20 16:45:35 +00:00
genmsk144.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
genmsk_128_90.f90	Remove some bcontest stuff associated with MSK144.	2018-07-11 14:42:48 -04:00
genmsk_short.f90
genqra64.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
genwspr.f90	Failed to save before commit. Fixed now.	2016-10-07 17:52:48 +00:00
geodist.f90
getlags.f90
getmet4.f90
go_chkfft.cmd	Update the utility program chkfft.	2016-10-06 18:30:10 +00:00
golay24_table.c
gran.c
graycode65.f90
graycode.f90
grayline.f90
grid2deg.f90
hash.f90
hashing.f90
hint65.f90	Old-style "NA VHF Contest" mode removed from all Fortran routines.	2018-07-10 15:09:42 -04:00
hspec.f90	Pass nContest value to hspec.f90.	2018-07-27 09:45:14 -04:00
igray.c
image.f90
indexx.f90
init_random_seed.c
init_random_seed.f90
init_random_seed.h
init_rs.c
int.h
inter_wspr.f90
interleave4.f90
interleave8.f90
interleave9.f90
interleave63.f90
ipcomm.cpp
iscat.f90	Reduce the ISCAT decoder stack size requirement	2016-11-08 23:41:32 +00:00
iso_c_utilities.f90
jplsubs.f
jt4_decode.f90	Code cleanup and improvement in the JT4 decoder.	2018-07-23 12:42:50 -04:00
jt4.f90
jt4a.f90
jt4code.f90
jt4sim.f90	Install G3WDG changes to make jt4sim use the same fast fading model as qra64sim.	2016-12-16 18:51:53 +00:00
jt9_decode.f90
jt9.f90	Wire up the 'Decode only 77-bit messages' checkbox.	2018-07-05 07:51:10 -05:00
jt9a.f90	Code cleanup.	2017-06-27 20:50:17 +00:00
jt9code.f90	Message unpacking fixes and improved test coverage	2017-04-22 12:40:44 +00:00
jt9com.f90	Wire up the 'Decode only 77-bit messages' checkbox.	2018-07-05 07:51:10 -05:00
jt9fano.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
jt9sim.f90
jt9sync.f90
jt9w.f90
jt49sim.f90	Code cleanup and improvement in the JT4 decoder.	2018-07-23 12:42:50 -04:00
jt65_decode.f90	Attempt to improve calibration of JT65 V/U/M SNR estimates.	2018-01-01 22:11:36 +00:00
jt65_mod.f90
jt65_test.f90	Experimental implementation of AP decoding for JT65 - configured for testing only. Not usable on the air.	2017-11-04 17:03:56 +00:00
jt65.f90	Experimental implementation of AP decoding for JT65 - configured for testing only. Not usable on the air.	2017-11-04 17:03:56 +00:00
jt65code.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
jt65sim.f90	Old-style "NA VHF Contest" mode removed from all Fortran routines.	2018-07-10 15:09:42 -04:00
jtmsg.f90	Prevent a certain type of non-standard message from being flagged as a false decode.	2017-07-22 13:21:03 +00:00
ldpc32_table.c
ldpc_128_90_b_generator.f90	Add 'code b' - a better (128,90) code. Code b has irregular column weights - 80% weight 3 and 20% weight 4.	2018-06-14 15:38:58 -05:00
ldpc_128_90_b_reordered_parity.f90	Add 'code b' - a better (128,90) code. Code b has irregular column weights - 80% weight 3 and 20% weight 4.	2018-06-14 15:38:58 -05:00
ldpc_128_90_generator.f90	Add routines that will implement 77-bit messages for MSK144. Initial tests will use a (128,90) code.	2018-06-13 09:40:04 -05:00
ldpc_128_90_reordered_parity.f90	Add routines that will implement 77-bit messages for MSK144. Initial tests will use a (128,90) code.	2018-06-13 09:40:04 -05:00
ldpcsim40.f90	Bring ldpcsim40.f90 up to date and add coherent averaging option to both ldpcsim144 and ldpcsim40. These routines simulate only the performance of the code and the hash/CRC.	2017-02-26 20:14:51 +00:00
ldpcsim128_90.f90	Working toward whole-hog switchover to new LDPC code with 77 bit messages in MSK144.	2018-07-07 09:44:52 -05:00
ldpcsim144.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
libration.f90
lorentzian.f90
lpf1.f90
Makefile	Correct a typo in User Guide. Re-order items on Tools menu.	2017-01-16 13:38:12 +00:00
Makefile.jt9w
Makefile.jt9w_Win
Makefile.jt65
Makefile.jt65_osx
Makefile.jt65_Win
Makefile.jtsdk
Makefile.linux
Makefile.MinGW
Makefile.MinGW.qt4
Makefile.msk
Makefile.mskWin
makepings.f90	Experimenting with a slow MSK144 mode.	2017-06-06 18:57:17 +00:00
met8.21
mixlpf.f90
moondopjpl.f90
morse.f90
move.f90
msgs.txt
msk40_freq_search.f90	Improve sensitivity of msk40spd.	2016-10-04 00:49:38 +00:00
msk40decodeframe.f90	Disallow Sh message decodes with nrxrpt .le. 6.	2017-01-06 20:53:50 +00:00
msk40spd.f90	Disallow Sh message decodes with nrxrpt .le. 6.	2017-01-06 20:53:50 +00:00
msk40sync.f90	More progress on MSK40 decoder. THIS REVISION IS NOT INTENDED FOR USE ON THE AIR.	2016-10-03 20:18:53 +00:00
msk144_freq_search.f90	Further speed improvements for MSK144 RT decoding. Fiz what I broke in the "click-on-CQ-message" logic.	2016-10-03 17:08:02 +00:00
msk144code.f90	Remove some bcontest stuff associated with MSK144.	2018-07-11 14:42:48 -04:00
msk144d2.f90	Bring msk144d2 more up to date. Runs now, but still needs more work.	2017-07-24 14:23:22 +00:00
msk144decodeframe.f90	Screen MSK144 decodes and reject if more than 18 hard errors were 'corrected'. These are almost certainly undetected errors.	2018-07-08 12:53:23 +00:00
msk144sd.f90	More development tool tweaks.	2017-06-22 13:54:21 +00:00
msk144signalquality.f90	Remove some bcontest stuff associated with MSK144.	2018-07-11 14:42:48 -04:00
msk144sim.f90	Remove some bcontest stuff associated with MSK144.	2018-07-11 14:42:48 -04:00
msk144spd.f90	Change a message length from 22 to 37 chars.	2018-07-07 12:10:02 -05:00
msk144sync.f90	Further speed improvements for MSK144 RT decoding. Fiz what I broke in the "click-on-CQ-message" logic.	2016-10-03 17:08:02 +00:00
mskber.f90
mskdt.f90
mskrtd.f90	Old-style "NA VHF Contest" mode removed from all Fortran routines.	2018-07-10 15:09:42 -04:00
nfft.dat
nfft.out	Save fsk4sim.f90 with 3 @ 4x4 sync arrays.	2017-03-30 19:24:20 +00:00
noisegen.f90
options.f90
packjt.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
pctile.f90	Further work on ft8sim and ft8d.	2017-06-16 13:27:17 +00:00
peakdt9.f90
peakup.f90
pfx.f90
plotsave.f90	Fix allocation logic for allocatable array sw.	2018-01-26 18:41:09 +00:00
polyfit.f90	Fix a minor typo.	2016-11-30 00:40:50 +00:00
prcom.f90
prog_args.f90
ps4.f90
psk_parse.f90	Utility program to parse Phil Gladstone's raw-data file from PSKreporter.	2017-03-01 17:40:25 +00:00
ptt.c
qra64a.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
qra64code.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
qratest.f90	Many adjustments to QRA64 decoder. Best performance yet on the 114 benchmark files.	2016-12-15 18:42:33 +00:00
readwav.f90
rectify_msk.f90
refspectrum.f90	Make refspec filter causal for overlap and add.	2017-07-16 00:10:37 +00:00
rig_control.c
rs.h
savec2.f90	Fix WSPR c2 file writing	2016-12-17 00:06:22 +00:00
sec_midn.f90
setup65.f90
sfrsd.f90
sgran.c
sh65.f90	Correct some flaws in decoding JT65 shorthand messages. Still needs work!	2016-10-18 17:27:06 +00:00
sh65snr.f90
shell.f90
slasubs.f
sleep_msec.f90
sleep.h
slope.f90	Minor tweaks to JT65 decoding.	2017-11-28 20:46:00 +00:00
smo121.f90
smo.f90
smolorentz.f90
softsym9f.f90
softsym9w.f90	New simulator jt49sim, replaces both jt4sim and jt9sim. Fix the S/N estimates made for slow/wide JT9 submodes.	2018-04-25 17:24:58 +00:00
softsym.f90
sort.f90
spec9f.f90
spec64.f90	Many adjustments to QRA64 decoder. Best performance yet on the 114 benchmark files.	2016-12-15 18:42:33 +00:00
ss.bat
stats.f90
stdmsg.f90	Code cleanup and improvement in the JT4 decoder.	2018-07-23 12:42:50 -04:00
subtract65.f90
sun.f90
symspec2.f90
symspec65.f90	Minor tweaks to JT65 decoding.	2017-11-28 20:46:00 +00:00
symspec.f90	Temporary commit of plotsave-related code. Not finished!	2018-01-17 15:32:45 +00:00
sync4.f90	Code cleanup and improvement in the JT4 decoder.	2018-07-23 12:42:50 -04:00
sync9.f90
sync9f.f90
sync9w.f90
sync64.f90	Better scheme for displaying QRA65 sync results.	2017-02-10 16:38:19 +00:00
sync65.f90	Minor tweaks to JT65 decoding.	2017-11-28 20:46:00 +00:00
synciscat.f90	Correct another flaw in ISCAT decoder.	2016-10-18 20:17:56 +00:00
syncmsk.f90	Code cleanup related to "bcontest". Auto-seq now OK for new NA VHF Contest messages.	2018-07-11 10:13:42 -04:00
t6.f90
tab.c
test_init_random_seed.f90
testfast9.f90
testmsg.f90	Message unpacking fixes and improved test coverage	2017-04-22 12:40:44 +00:00
timefft_opts.f90
timefft.f90
timer_C_wrapper.f90
timer_common.inc
timer_impl.f90
timer_module.f90
timf2.f90
tmoonsub.c
to_contest_msg.f90	Working on some features for NA VHF contests. Not finished!	2017-07-27 20:17:30 +00:00
tstrig.c
tstrig.h
tweak1.f90	New short ping decoding algorithm for msk144 realtime decoder. Not yet enabled.	2016-09-23 22:28:11 +00:00
twkfreq65.f90
twkfreq.f90
unpackmsg144.f90	Progress toward SWL capability. Not finished and not tested.	2016-12-31 02:05:51 +00:00
update_hasharray.f90	Tweaks to reject certain types of spurious decodes.	2017-01-04 01:16:19 +00:00
update_recent_calls.f90	Progress toward SWL capability. Not finished and not tested.	2016-12-31 02:05:51 +00:00
usleep.c
vit213.c
vit216.c
wav11.f90	No bounds-check for Release build; increase Windows stack size, again; some fixes for ISCAT mode.	2016-10-16 17:36:00 +00:00
wav12.f90
wavhdr.f90
wisdom1.bat
wisdom.c
wqdecode.f90	Updates and additions to test progams.	2017-04-27 17:43:21 +00:00
wqencode.f90	Fix a crash when a 4 character grid is used in WSPR with a compound callsign	2016-08-29 17:01:53 +00:00
wrapkarn.c
wsjt_modes.txt
wspr_downsample.f90
xcall.txt	Add data file for fox_sim.	2017-11-10 13:16:43 +00:00
xcor4.f90
xcor.f90	Experimental changes to JT65 decoder:	2017-10-22 00:09:01 +00:00
zplot9.f90
zplt.f90