WSJT-X/boost/libs/math/doc/sf/ibeta_inv.qbk

369 lines
14 KiB
Plaintext

[section:ibeta_inv_function The Incomplete Beta Function Inverses]
``
#include <boost/math/special_functions/beta.hpp>
``
namespace boost{ namespace math{
template <class T1, class T2, class T3>
``__sf_result`` ibeta_inv(T1 a, T2 b, T3 p);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibeta_inv(T1 a, T2 b, T3 p, const ``__Policy``&);
template <class T1, class T2, class T3, class T4>
``__sf_result`` ibeta_inv(T1 a, T2 b, T3 p, T4* py);
template <class T1, class T2, class T3, class T4, class ``__Policy``>
``__sf_result`` ibeta_inv(T1 a, T2 b, T3 p, T4* py, const ``__Policy``&);
template <class T1, class T2, class T3>
``__sf_result`` ibetac_inv(T1 a, T2 b, T3 q);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibetac_inv(T1 a, T2 b, T3 q, const ``__Policy``&);
template <class T1, class T2, class T3, class T4>
``__sf_result`` ibetac_inv(T1 a, T2 b, T3 q, T4* py);
template <class T1, class T2, class T3, class T4, class ``__Policy``>
``__sf_result`` ibetac_inv(T1 a, T2 b, T3 q, T4* py, const ``__Policy``&);
template <class T1, class T2, class T3>
``__sf_result`` ibeta_inva(T1 b, T2 x, T3 p);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibeta_inva(T1 b, T2 x, T3 p, const ``__Policy``&);
template <class T1, class T2, class T3>
``__sf_result`` ibetac_inva(T1 b, T2 x, T3 q);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibetac_inva(T1 b, T2 x, T3 q, const ``__Policy``&);
template <class T1, class T2, class T3>
``__sf_result`` ibeta_invb(T1 a, T2 x, T3 p);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibeta_invb(T1 a, T2 x, T3 p, const ``__Policy``&);
template <class T1, class T2, class T3>
``__sf_result`` ibetac_invb(T1 a, T2 x, T3 q);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibetac_invb(T1 a, T2 x, T3 q, const ``__Policy``&);
}} // namespaces
[h4 Description]
There are six [@http://functions.wolfram.com/GammaBetaErf/ incomplete beta function inverses]
which allow you solve for
any of the three parameters to the incomplete beta, starting from either
the result of the incomplete beta (p) or its complement (q).
[optional_policy]
[tip When people normally talk about the inverse of the incomplete
beta function, they are talking about inverting on parameter /x/.
These are implemented here as ibeta_inv and ibetac_inv, and are by
far the most efficient of the inverses presented here.
The inverses on the /a/ and /b/ parameters find use in some statistical
applications, but have to be computed by rather brute force numerical
techniques and are consequently several times slower.
These are implemented here as ibeta_inva and ibeta_invb,
and complement versions ibetac_inva and ibetac_invb.]
The return type of these functions is computed using the __arg_promotion_rules
when called with arguments T1...TN of different types.
template <class T1, class T2, class T3>
``__sf_result`` ibeta_inv(T1 a, T2 b, T3 p);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibeta_inv(T1 a, T2 b, T3 p, const ``__Policy``&);
template <class T1, class T2, class T3, class T4>
``__sf_result`` ibeta_inv(T1 a, T2 b, T3 p, T4* py);
template <class T1, class T2, class T3, class T4, class ``__Policy``>
``__sf_result`` ibeta_inv(T1 a, T2 b, T3 p, T4* py, const ``__Policy``&);
Returns a value /x/ such that: `p = ibeta(a, b, x);`
and sets `*py = 1 - x` when the `py` parameter is provided and is non-null.
Note that internally this function computes whichever is the smaller of
`x` and `1-x`, and therefore the value assigned to `*py` is free from
cancellation errors. That means that even if the function returns `1`, the
value stored in `*py` may be non-zero, albeit very small.
Requires: /a,b > 0/ and /0 <= p <= 1/.
[optional_policy]
template <class T1, class T2, class T3>
``__sf_result`` ibetac_inv(T1 a, T2 b, T3 q);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibetac_inv(T1 a, T2 b, T3 q, const ``__Policy``&);
template <class T1, class T2, class T3, class T4>
``__sf_result`` ibetac_inv(T1 a, T2 b, T3 q, T4* py);
template <class T1, class T2, class T3, class T4, class ``__Policy``>
``__sf_result`` ibetac_inv(T1 a, T2 b, T3 q, T4* py, const ``__Policy``&);
Returns a value /x/ such that: `q = ibetac(a, b, x);`
and sets `*py = 1 - x` when the `py` parameter is provided and is non-null.
Note that internally this function computes whichever is the smaller of
`x` and `1-x`, and therefore the value assigned to `*py` is free from
cancellation errors. That means that even if the function returns `1`, the
value stored in `*py` may be non-zero, albeit very small.
Requires: /a,b > 0/ and /0 <= q <= 1/.
[optional_policy]
template <class T1, class T2, class T3>
``__sf_result`` ibeta_inva(T1 b, T2 x, T3 p);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibeta_inva(T1 b, T2 x, T3 p, const ``__Policy``&);
Returns a value /a/ such that: `p = ibeta(a, b, x);`
Requires: /b > 0/, /0 < x < 1/ and /0 <= p <= 1/.
[optional_policy]
template <class T1, class T2, class T3>
``__sf_result`` ibetac_inva(T1 b, T2 x, T3 p);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibetac_inva(T1 b, T2 x, T3 p, const ``__Policy``&);
Returns a value /a/ such that: `q = ibetac(a, b, x);`
Requires: /b > 0/, /0 < x < 1/ and /0 <= q <= 1/.
[optional_policy]
template <class T1, class T2, class T3>
``__sf_result`` ibeta_invb(T1 b, T2 x, T3 p);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibeta_invb(T1 b, T2 x, T3 p, const ``__Policy``&);
Returns a value /b/ such that: `p = ibeta(a, b, x);`
Requires: /a > 0/, /0 < x < 1/ and /0 <= p <= 1/.
[optional_policy]
template <class T1, class T2, class T3>
``__sf_result`` ibetac_invb(T1 b, T2 x, T3 p);
template <class T1, class T2, class T3, class ``__Policy``>
``__sf_result`` ibetac_invb(T1 b, T2 x, T3 p, const ``__Policy``&);
Returns a value /b/ such that: `q = ibetac(a, b, x);`
Requires: /a > 0/, /0 < x < 1/ and /0 <= q <= 1/.
[optional_policy]
[h4 Accuracy]
The accuracy of these functions should closely follow that
of the regular forward incomplete beta functions. However,
note that in some parts of their domain, these functions can
be extremely sensitive to changes in input, particularly when
the argument /p/ (or it's complement /q/) is very close to `0` or `1`.
Comparisons to other libraries are shown below, note that our test data
exercises some rather extreme cases in the incomplete beta function
which many other libraries fail to handle:
[table_ibeta_inv]
[table_ibetac_inv]
[table_ibeta_inva]
[table_ibetac_inva]
[table_ibeta_invb]
[table_ibetac_invb]
[h4 Testing]
There are two sets of tests:
* Basic sanity checks attempt to "round-trip" from
/a, b/ and /x/ to /p/ or /q/ and back again. These tests have quite
generous tolerances: in general both the incomplete beta and its
inverses change so rapidly, that round tripping to more than a couple
of significant digits isn't possible. This is especially true when
/p/ or /q/ is very near one: in this case there isn't enough
"information content" in the input to the inverse function to get
back where you started.
* Accuracy checks using high precision test values. These measure
the accuracy of the result, given exact input values.
[h4 Implementation of ibeta_inv and ibetac_inv]
These two functions share a common implementation.
First an initial approximation to x is computed then the
last few bits are cleaned up using
[@http://en.wikipedia.org/wiki/Simple_rational_approximation Halley iteration].
The iteration limit is set to 1/2 of the number of bits in T, which by experiment is
sufficient to ensure that the inverses are at least as accurate as the normal
incomplete beta functions. Up to 5 iterations may be
required in extreme cases, although normally only one or two are required.
Further, the number of iterations required decreases with increasing /a/ and
/b/ (which generally form the more important use cases).
The initial guesses used for iteration are obtained as follows:
Firstly recall that:
[equation ibeta_inv5]
We may wish to start from either p or q, and to calculate either x or y.
In addition at
any stage we can exchange a for b, p for q, and x for y if it results in a
more manageable problem.
For `a+b >= 5` the initial guess is computed using the methods described in:
Asymptotic Inversion of the Incomplete Beta Function,
by N. M. [@http://homepages.cwi.nl/~nicot/ Temme].
Journal of Computational and Applied Mathematics 41 (1992) 145-157.
The nearly symmetrical case (section 2 of the paper) is used for
[equation ibeta_inv2]
and involves solving the inverse error function first. The method is accurate
to at least 2 decimal digits when [^a = 5] rising to at least 8 digits when
[^a = 10[super 5]].
The general error function case (section 3 of the paper) is used for
[equation ibeta_inv3]
and again expresses the inverse incomplete beta in terms of the
inverse of the error function. The method is accurate to at least
2 decimal digits when [^a+b = 5] rising to 11 digits when [^a+b = 10[super 5]].
However, when the result is expected to be very small, and when a+b is
also small, then its accuracy tails off, in this case when p[super 1/a] < 0.0025
then it is better to use the following as an initial estimate:
[equation ibeta_inv4]
Finally the for all other cases where `a+b > 5` the method of section
4 of the paper is used. This expresses the inverse incomplete beta in terms
of the inverse of the incomplete gamma function, and is therefore significantly
more expensive to compute than the other cases. However the method is accurate
to at least 3 decimal digits when [^a = 5] rising to at least 10 digits when
[^a = 10[super 5]]. This method is limited to a > b, and therefore we need to perform
an exchange a for b, p for q and x for y when this is not the case. In addition
when p is close to 1 the method is inaccurate should we actually want y rather
than x as output. Therefore when q is small ([^q[super 1/p] < 10[super -3]]) we use:
[equation ibeta_inv6]
which is both cheaper to compute than the full method, and a more accurate
estimate on q.
When a and b are both small there is a distinct lack of information in the
literature on how to proceed. I am extremely grateful to Prof Nico Temme
who provided the following information with a great deal of patience and
explanation on his part. Any errors that follow are entirely my own, and not
Prof Temme's.
When a and b are both less than 1, then there is a point of inflection in
the incomplete beta at point `xs = (1 - a) / (2 - a - b)`. Therefore if
[^p > I[sub x](a,b)] we swap a for b, p for q and x for y, so that now we always
look for a point x below the point of inflection `xs`, and on a convex curve.
An initial estimate for x is made with:
[equation ibeta_inv7]
which is provably below the true value for x:
[@http://en.wikipedia.org/wiki/Newton%27s_method Newton iteration] will
therefore smoothly converge on x without problems caused by overshooting etc.
When a and b are both greater than 1, but a+b is too small to use the other
methods mentioned above, we proceed as follows. Observe that there is a point
of inflection in the incomplete beta at `xs = (1 - a) / (2 - a - b)`. Therefore
if [^p > I[sub x](a,b)] we swap a for b, p for q and x for y, so that now we always
look for a point x below the point of inflection `xs`, and on a concave curve.
An initial estimate for x is made with:
[equation ibeta_inv4]
which can be improved somewhat to:
[equation ibeta_inv1]
when b and x are both small (I've used b < a and x < 0.2). This
actually under-estimates x, which drops us on the wrong side of x for Newton
iteration to converge monotonically. However, use of higher derivatives
and Halley iteration keeps everything under control.
The final case to be considered if when one of a and b is less than or equal
to 1, and the other greater that 1. Here, if b < a we swap a for b, p for q
and x for y. Now the curve of the incomplete beta is convex with no points
of inflection in [0,1]. For small p, x can be estimated using
[equation ibeta_inv4]
which under-estimates x, and drops us on the right side of the true value
for Newton iteration to converge monotonically. However, when p is large
this can quite badly underestimate x. This is especially an issue when we
really want to find y, in which case this method can be an arbitrary number
of order of magnitudes out, leading to very poor convergence during iteration.
Things can be improved by considering the incomplete beta as a distorted
quarter circle, and estimating y from:
[equation ibeta_inv8]
This doesn't guarantee that we will drop in on the right side of x for
monotonic convergence, but it does get us close enough that Halley iteration
rapidly converges on the true value.
[h4 Implementation of inverses on the a and b parameters]
These four functions share a common implementation.
First an initial approximation is computed for /a/ or /b/:
where possible this uses a Cornish-Fisher expansion for the
negative binomial distribution to get within around 1 of the
result. However, when /a/ or /b/ are very small the Cornish Fisher
expansion is not usable, in this case the initial approximation
is chosen so that
I[sub x](a, b) is near the middle of the range [0,1].
This initial guess is then
used as a starting value for a generic root finding algorithm. The
algorithm converges rapidly on the root once it has been
bracketed, but bracketing the root may take several iterations.
A better initial approximation for /a/ or /b/ would improve these
functions quite substantially: currently 10-20 incomplete beta
function invocations are required to find the root.
[endsect][/section:ibeta_inv_function The Incomplete Beta Function Inverses]
[/
Copyright 2006 John Maddock and Paul A. Bristow.
Distributed under the Boost Software License, Version 1.0.
(See accompanying file LICENSE_1_0.txt or copy at
http://www.boost.org/LICENSE_1_0.txt).
]