WSJT-X/translations/wsjtx_zh_HK.ts

6292 lines
290 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="zh_HK">
<context>
<name>AbstractLogWindow</name>
<message>
<location filename="../widgets/AbstractLogWindow.cpp" line="144"/>
<source>&amp;Delete ...</source>
<translation>刪除(&amp;D) ...</translation>
</message>
</context>
<context>
<name>AbstractLogWindow::impl</name>
<message>
<location filename="../widgets/AbstractLogWindow.cpp" line="64"/>
<source>Confirm Delete</source>
<translation>確認刪除</translation>
</message>
<message numerus="yes">
<location filename="../widgets/AbstractLogWindow.cpp" line="65"/>
<source>Are you sure you want to delete the %n selected QSO(s) from the log?</source>
<translation>
<numerusform>是否確定要從日誌中刪除 %n 選取的通聯?</numerusform>
</translation>
</message>
</context>
<context>
<name>Astro</name>
<message>
<location filename="../widgets/astro.ui" line="34"/>
<location filename="../widgets/astro.ui" line="260"/>
<source>Doppler tracking</source>
<translation>多普勒跟蹤</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="40"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;One station does all Doppler shift correction, their QSO partner receives and transmits on the sked frequency.&lt;/p&gt;&lt;p&gt;If the rig does not accept CAT QSY commands while transmitting a single correction is applied for the whole transmit period.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;一個站執行所有多普勒換檔校正, 他們的通聯合作夥伴接收和傳輸 sked 頻率.&lt;/p&gt;&lt;p&gt;如果無線電設備在傳輸單校正時不接受 CAT QSY 命令則在整個傳輸期間應用.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="43"/>
<source>Full Doppler to DX Grid</source>
<translation>全多普勒到 DX 網格</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="53"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Transmit takes place on sked frequency and receive frequency is corrected for own echoes. &lt;/p&gt;&lt;p&gt;This mode can be used for calling CQ, or when using Echo mode.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;傳輸以 sked 頻率進行, 接收頻率被校正為自己的回波. &lt;/p&gt;&lt;p&gt;此模式可用於呼叫 CQ 或使用回波模式時.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="56"/>
<source>Own Echo</source>
<translation>自己的回波</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="63"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Both stations correct for Doppler shift such that they would be heard on the moon at the sked frequency.&lt;/p&gt;&lt;p&gt;If the rig does not accept CAT QSY commands while transmitting a single correction is applied for the whole transmit period.&lt;/p&gt;&lt;p&gt;Use this option also for Echo mode.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;兩個站都對多普勒移位進行校正, 這樣它們就會在月球上以sked頻率聽到.&lt;/p&gt;&lt;p&gt;如果無線電設備在傳輸單校正時不接受 CAT QSY 命令, 則在整個傳輸期間應用.&lt;/p&gt;&lt;p&gt;對於回音模式也使用此選項&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="66"/>
<source>Constant frequency on Moon</source>
<translation>月球上的恆定頻率</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="76"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;DX station announces their TX Freq, which is entered as the Sked Freq. Correction applied to RX and TX so you appear on the DX&apos;s station&apos;s own echo Freq.&lt;/p&gt;&lt;p&gt;If the rig does not accept CAT QSY commands while transmitting a single correction is applied for the whole transmit period.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;DX電臺宣佈其發射頻率, 這是輸入作為Sked頻率修正應用於接收和發射, 所以你出現在DX電臺自己的回波頻率.&lt;/p&gt;&lt;p&gt;如果無線電設備在傳輸單個校正時不接受 CAT QSY 命令則在整個傳輸期間應用.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="79"/>
<source>On DX Echo</source>
<translation>在 DX 回波</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="89"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Tune radio manually and select this mode to put your echo on the same frequency.&lt;/p&gt;&lt;p&gt;If the rig does not accept CAT QSY commands while transmitting a single correction is applied for the whole transmit period.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;手動調諧無線電設備並選擇此模式, 將回波置於相同頻率.&lt;/p&gt;&lt;p&gt;如果無線電設備在傳輸單個校正時不接受 CAT QSY 命令則在整個傳輸期間應用.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="92"/>
<source>Call DX</source>
<translation>呼叫 DX</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="102"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;No Doppler shift correction is applied. This may be used when the QSO partner does full Doppler correction to your grid square.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;未應用多普勒換檔校正. 當通聯合作夥伴對網格方進行完全多普勒校正時可能會使用.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="105"/>
<source>None</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="121"/>
<source>Sked frequency</source>
<translation>Sked 頻率</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="134"/>
<location filename="../widgets/astro.ui" line="151"/>
<source>0</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="168"/>
<source>Rx:</source>
<translation>接收:</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="182"/>
<source>Tx:</source>
<translation>發射:</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="189"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Press and hold the CTRL key to adjust the sked frequency manually with the rig&apos;s VFO dial or enter frequency directly into the band entry field on the main window.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;按住 CTRL 鍵使用手動 sked 頻率與無線電設備 VFO 將頻率直接撥入主視窗中的頻段輸入欄位.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/astro.ui" line="242"/>
<source>Astro Data</source>
<translation>天體資料</translation>
</message>
<message>
<location filename="../widgets/astro.cpp" line="48"/>
<source>Astronomical Data</source>
<translation>天文資料</translation>
</message>
<message>
<location filename="../widgets/astro.cpp" line="265"/>
<source>Doppler Tracking Error</source>
<translation>多普勒跟蹤錯誤</translation>
</message>
<message>
<location filename="../widgets/astro.cpp" line="266"/>
<source>Split operating is required for Doppler tracking</source>
<translation>多普勒跟蹤需要異頻操作</translation>
</message>
<message>
<location filename="../widgets/astro.cpp" line="267"/>
<source>Go to &quot;Menu-&gt;File-&gt;Settings-&gt;Radio&quot; to enable split operation</source>
<translation>轉到 &quot;菜單-&gt;檔案-&gt;設置-&gt;無線電設備&quot; 啟用異頻操作</translation>
</message>
</context>
<context>
<name>Bands</name>
<message>
<location filename="../models/Bands.cpp" line="137"/>
<source>Band name</source>
<translation>波段名稱</translation>
</message>
<message>
<location filename="../models/Bands.cpp" line="138"/>
<source>Lower frequency limit</source>
<translation>頻率下限</translation>
</message>
<message>
<location filename="../models/Bands.cpp" line="139"/>
<source>Upper frequency limit</source>
<translation>頻率上限</translation>
</message>
<message>
<location filename="../models/Bands.cpp" line="201"/>
<source>Band</source>
<translation>波段</translation>
</message>
<message>
<location filename="../models/Bands.cpp" line="202"/>
<source>Lower Limit</source>
<translation>下限</translation>
</message>
<message>
<location filename="../models/Bands.cpp" line="203"/>
<source>Upper Limit</source>
<translation>上限</translation>
</message>
</context>
<context>
<name>CAboutDlg</name>
<message>
<location filename="../widgets/about.ui" line="9"/>
<source>About WSJT-X</source>
<translation>關於 WSJT-X</translation>
</message>
<message>
<location filename="../widgets/about.ui" line="60"/>
<source>OK</source>
<translation>確定</translation>
</message>
</context>
<context>
<name>CPlotter</name>
<message>
<location filename="../widgets/plotter.cpp" line="26"/>
<source>&amp;Set Rx &amp;&amp; Tx Offset</source>
<translation>設定接收 &amp;&amp; 發射偏頻(&amp;S)</translation>
</message>
</context>
<context>
<name>CabrilloLog</name>
<message>
<location filename="../models/CabrilloLog.cpp" line="91"/>
<source>Freq(MHz)</source>
<translation>頻率(MHz)</translation>
</message>
<message>
<location filename="../models/CabrilloLog.cpp" line="92"/>
<source>Mode</source>
<translation>模式</translation>
</message>
<message>
<location filename="../models/CabrilloLog.cpp" line="93"/>
<source>Date &amp; Time(UTC)</source>
<translation>日期和時間(UTC)</translation>
</message>
<message>
<location filename="../models/CabrilloLog.cpp" line="94"/>
<source>Call</source>
<translation>呼號</translation>
</message>
<message>
<location filename="../models/CabrilloLog.cpp" line="95"/>
<source>Sent</source>
<translation>發出</translation>
</message>
<message>
<location filename="../models/CabrilloLog.cpp" line="96"/>
<source>Rcvd</source>
<translation>接收</translation>
</message>
<message>
<location filename="../models/CabrilloLog.cpp" line="97"/>
<source>Band</source>
<translation>波段</translation>
</message>
</context>
<context>
<name>CabrilloLogWindow</name>
<message>
<location filename="../widgets/CabrilloLogWindow.ui" line="14"/>
<source>Contest Log</source>
<translation>競賽日誌</translation>
</message>
<message>
<location filename="../widgets/CabrilloLogWindow.ui" line="20"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Right-click here for available actions.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;按右鍵此處查看可用操作.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/CabrilloLogWindow.ui" line="23"/>
<source>Right-click here for available actions.</source>
<translation>按右鍵此處查看可用操作.</translation>
</message>
</context>
<context>
<name>CallsignDialog</name>
<message>
<location filename="../GetUserId.cpp" line="29"/>
<source>Callsign</source>
<translation>呼號</translation>
</message>
</context>
<context>
<name>ColorHighlighting</name>
<message>
<location filename="../widgets/colorhighlighting.ui" line="20"/>
<location filename="../widgets/colorhighlighting.ui" line="33"/>
<location filename="../widgets/colorhighlighting.ui" line="53"/>
<location filename="../widgets/colorhighlighting.ui" line="80"/>
<location filename="../widgets/colorhighlighting.ui" line="114"/>
<location filename="../widgets/colorhighlighting.ui" line="127"/>
<location filename="../widgets/colorhighlighting.ui" line="140"/>
<location filename="../widgets/colorhighlighting.ui" line="167"/>
<location filename="../widgets/colorhighlighting.ui" line="180"/>
<location filename="../widgets/colorhighlighting.ui" line="193"/>
<location filename="../widgets/colorhighlighting.ui" line="220"/>
<location filename="../widgets/colorhighlighting.ui" line="233"/>
<location filename="../widgets/colorhighlighting.ui" line="246"/>
<location filename="../widgets/colorhighlighting.ui" line="259"/>
<location filename="../widgets/colorhighlighting.ui" line="272"/>
<location filename="../widgets/colorhighlighting.ui" line="285"/>
<source>K1ABC</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="43"/>
<source>CQ in message</source>
<translation>CQ 在信息內</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="63"/>
<source>My Call in message</source>
<translation>我呼號在信息內</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="70"/>
<source>Transmitted message</source>
<translation>發射信息</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="90"/>
<source>New DXCC</source>
<translation>新DXCC</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="97"/>
<source>New Grid</source>
<translation>新網格</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="104"/>
<source>New DXCC on Band</source>
<translation>新DXCC 波段</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="150"/>
<source>New Call</source>
<translation>新呼號</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="157"/>
<source>New Grid on Band</source>
<translation>新網格 波段</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="203"/>
<source>New Call on Band</source>
<translation>新呼號 波段</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="210"/>
<source>Uploads to LotW</source>
<translation>上傳至 LotW</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="295"/>
<source>New Continent</source>
<translation>新大洲</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="302"/>
<source>New Continent on Band</source>
<translation>新大洲 波段</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="309"/>
<source>New CQ Zone</source>
<translation>新 CQ區</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="316"/>
<source>New CQ Zone on Band</source>
<translation>新CQ區 波段</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="323"/>
<source>New ITU Zone</source>
<translation>新 ITU區</translation>
</message>
<message>
<location filename="../widgets/colorhighlighting.ui" line="330"/>
<source>New ITU Zone on Band</source>
<translation>新ITU區 波段</translation>
</message>
</context>
<context>
<name>Configuration::impl</name>
<message>
<location filename="../Configuration.cpp" line="960"/>
<location filename="../Configuration.cpp" line="1117"/>
<location filename="../Configuration.cpp" line="1141"/>
<source>&amp;Delete</source>
<translation>刪除(&amp;D)</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="961"/>
<location filename="../Configuration.cpp" line="1145"/>
<source>&amp;Insert ...</source>
<translation>插入(&amp;I) ...</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="989"/>
<source>Failed to create save directory</source>
<translation>無法建立儲存目錄</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="990"/>
<source>path: &quot;%1%</source>
<translation>目錄: &quot;%1%</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1001"/>
<source>Failed to create samples directory</source>
<translation>無法建立範例目錄</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1002"/>
<source>path: &quot;%1&quot;</source>
<translation>目录: &quot;%1&quot;</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1149"/>
<source>&amp;Load ...</source>
<translation>載入(&amp;L)...</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1153"/>
<source>&amp;Save as ...</source>
<translation>另存為(&amp;S) ...</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1157"/>
<source>&amp;Merge ...</source>
<translation>合併(&amp;M) ...</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1161"/>
<source>&amp;Reset</source>
<translation>重置(&amp;R)</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1733"/>
<source>Serial Port:</source>
<translation>串行端口:</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1734"/>
<source>Serial port used for CAT control</source>
<translation>用於CAT控制的串行端口</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1741"/>
<source>Network Server:</source>
<translation>網絡服務器:</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1742"/>
<source>Optional hostname and port of network service.
Leave blank for a sensible default on this machine.
Formats:
hostname:port
IPv4-address:port
[IPv6-address]:port</source>
<translation>可選主機名和網絡服務端口.
為無線電設備合理默認值保留空白.
格式:
主機名:端口
IP v4-地址:端口
[IPv6-地址]:端口</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1754"/>
<source>USB Device:</source>
<translation>USB設備:</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1755"/>
<source>Optional device identification.
Leave blank for a sensible default for the rig.
Format:
[VID[:PID[:VENDOR[:PRODUCT]]]]</source>
<translation>可選設備標識.
為無線電設備合理默認值保留空白.
格式:
[VID[:PID[:供應商[:產品]]]]</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1790"/>
<source>Invalid audio input device</source>
<translation>無效的音頻輸入設備</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1797"/>
<source>Invalid audio out device</source>
<translation>無效的音頻輸出設備</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1803"/>
<source>Invalid PTT method</source>
<translation>無效的PTT方法</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1813"/>
<source>Invalid PTT port</source>
<translation>無效的PTT端口</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1830"/>
<location filename="../Configuration.cpp" line="1848"/>
<source>Invalid Contest Exchange</source>
<translation>無效的競賽交換數據</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1831"/>
<source>You must input a valid ARRL Field Day exchange</source>
<translation>您必須輸入有效的 ARRL Field Day交換數據</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="1849"/>
<source>You must input a valid ARRL RTTY Roundup exchange</source>
<translation>您必須輸入有效的 ARRL RTTY Roundup 交換數據</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2186"/>
<source>Reset Decode Highlighting</source>
<translation>重置解碼突出顯示</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2187"/>
<source>Reset all decode highlighting and priorities to default values</source>
<translation>將所有解碼突出顯示和優先順序重置為預設值</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2207"/>
<source>WSJT-X Decoded Text Font Chooser</source>
<translation>WSJT-X 解碼文本字體選擇</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2384"/>
<source>Load Working Frequencies</source>
<translation>載入工作頻率</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2384"/>
<location filename="../Configuration.cpp" line="2403"/>
<location filename="../Configuration.cpp" line="2449"/>
<source>Frequency files (*.qrg);;All files (*.*)</source>
<translation>頻率檔案 (*.qrg);;所有檔案 (*.*)</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2391"/>
<source>Replace Working Frequencies</source>
<translation>替換工作頻率</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2392"/>
<source>Are you sure you want to discard your current working frequencies and replace them with the loaded ones?</source>
<translation>是否確實要放棄當前工作頻率, 並將其替換為載入的頻率?</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2403"/>
<source>Merge Working Frequencies</source>
<translation>合併工作頻率</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2420"/>
<location filename="../Configuration.cpp" line="2429"/>
<location filename="../Configuration.cpp" line="2439"/>
<source>Not a valid frequencies file</source>
<translation>不是有效的頻率檔案</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2420"/>
<source>Incorrect file magic</source>
<translation>不正確的檔案內容</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2429"/>
<source>Version is too new</source>
<translation>版本太新</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2439"/>
<source>Contents corrupt</source>
<translation>內容已損壞</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2449"/>
<source>Save Working Frequencies</source>
<translation>儲存工作頻率</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2458"/>
<source>Only Save Selected Working Frequencies</source>
<translation>只儲存選取的工作頻率</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2459"/>
<source>Are you sure you want to save only the working frequencies that are currently selected? Click No to save all.</source>
<translation>是否確定要只儲存目前選擇的工作頻率? 按一下 否 可儲存所有.</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2475"/>
<source>Reset Working Frequencies</source>
<translation>重置工作頻率</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2476"/>
<source>Are you sure you want to discard your current working frequencies and replace them with default ones?</source>
<translation>您確定要放棄您當前的工作頻率並用默認值頻率替換它們嗎?</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2514"/>
<source>Save Directory</source>
<translation>儲存目錄</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2528"/>
<source>AzEl Directory</source>
<translation>AzEl 目錄</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2588"/>
<source>Rig control error</source>
<translation>無線電設備控制錯誤</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2589"/>
<source>Failed to open connection to rig</source>
<translation>無法開啟無線電設備的連接</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="2803"/>
<source>Rig failure</source>
<translation>無線電設備故障</translation>
</message>
</context>
<context>
<name>DXLabSuiteCommanderTransceiver</name>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="71"/>
<source>Failed to connect to DX Lab Suite Commander
</source>
<translation>無法連接到DX Lab Suite Commander
</translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="127"/>
<source>DX Lab Suite Commander didn&apos;t respond correctly reading frequency: </source>
<translation>DX Lab Suite Commander讀取頻率沒有正確響應: </translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="174"/>
<source>DX Lab Suite Commander sent an unrecognised TX state: </source>
<translation>DX Lab Suite Commander 發送了一個無法識別的發送狀態: </translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="180"/>
<source>DX Lab Suite Commander didn&apos;t respond correctly polling TX status: </source>
<translation>DX Lab Suite Commander 沒有測試正確響應輪詢發送狀態: </translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="188"/>
<source>DX Lab Suite Commander rig did not respond to PTT: </source>
<translation>DX Lab Suite Commander 未響應無線電設備發送PTT: </translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="274"/>
<source>DX Lab Suite Commander didn&apos;t respond correctly polling frequency: </source>
<translation>DX Lab Suite Commander 沒有正確響應輪詢頻率: </translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="295"/>
<source>DX Lab Suite Commander didn&apos;t respond correctly polling TX frequency: </source>
<translation>DX Lab Suite Commander 沒有正確響應輪詢發射頻率: </translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="314"/>
<source>DX Lab Suite Commander sent an unrecognised split state: </source>
<translation>DX Lab Suite Commander 發送了一個無法識別的異頻狀態: </translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="320"/>
<source>DX Lab Suite Commander didn&apos;t respond correctly polling split status: </source>
<translation>DX Lab Suite Commander 沒有正確響應輪詢異頻狀態: </translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="376"/>
<source>DX Lab Suite Commander sent an unrecognised mode: &quot;</source>
<translation>DX Lab Suite Commander 發送了一個無法識別的模式: &quot;</translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="383"/>
<source>DX Lab Suite Commander didn&apos;t respond correctly polling mode: </source>
<translation>DX Lab Suite Commander 沒有正確響應輪詢模式: </translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="400"/>
<source>DX Lab Suite Commander send command failed
</source>
<translation>DX Lab Suite Commander 發送命令失敗
</translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="412"/>
<source>DX Lab Suite Commander failed to send command &quot;%1&quot;: %2
</source>
<translation>DX Lab Suite Commander 發送命令失敗 &quot;%1&quot;: %2
</translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="429"/>
<source>DX Lab Suite Commander send command &quot;%1&quot; read reply failed: %2
</source>
<translation>DX Lab Suite Commander 發送命令 &quot;%1&quot; 讀取回復失敗: %2
</translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="440"/>
<source>DX Lab Suite Commander retries exhausted sending command &quot;%1&quot;</source>
<translation>DX Lab Suite Commander 發送命令重試失敗 &quot;%1&quot;</translation>
</message>
<message>
<location filename="../Transceiver/DXLabSuiteCommanderTransceiver.cpp" line="503"/>
<source>DX Lab Suite Commander sent an unrecognized frequency</source>
<translation>DX Lab Suite Commander 發送了無法識別的頻率</translation>
</message>
</context>
<context>
<name>DecodeHighlightingListView</name>
<message>
<location filename="../widgets/DecodeHighlightingListView.cpp" line="14"/>
<source>&amp;Foreground color ...</source>
<translation>字體顏色(&amp;F) ...</translation>
</message>
<message>
<location filename="../widgets/DecodeHighlightingListView.cpp" line="20"/>
<source>Choose %1 Foreground Color</source>
<translation>選擇 %1 字體顏色</translation>
</message>
<message>
<location filename="../widgets/DecodeHighlightingListView.cpp" line="28"/>
<source>&amp;Unset foreground color</source>
<translation>清除字體顏色(&amp;U)</translation>
</message>
<message>
<location filename="../widgets/DecodeHighlightingListView.cpp" line="34"/>
<source>&amp;Background color ...</source>
<translation>底色(&amp;B) ...</translation>
</message>
<message>
<location filename="../widgets/DecodeHighlightingListView.cpp" line="40"/>
<source>Choose %1 Background Color</source>
<translation>選擇 %1 底色</translation>
</message>
<message>
<location filename="../widgets/DecodeHighlightingListView.cpp" line="48"/>
<source>U&amp;nset background color</source>
<translation>未設定背景顏色(&amp;n)</translation>
</message>
<message>
<location filename="../widgets/DecodeHighlightingListView.cpp" line="54"/>
<source>&amp;Reset this item to defaults</source>
<translation>將此項重置為預設值(&amp;R)</translation>
</message>
</context>
<context>
<name>DecodeHighlightingModel</name>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="104"/>
<source>CQ in message</source>
<translation>CQ 信息</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="105"/>
<source>My Call in message</source>
<translation>我的信息</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="106"/>
<source>Transmitted message</source>
<translation>發射信息</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="107"/>
<source>New DXCC</source>
<translation>新DXCC</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="108"/>
<source>New DXCC on Band</source>
<translation>新DXCC 波段</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="109"/>
<source>New Grid</source>
<translation>新網格</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="110"/>
<source>New Grid on Band</source>
<translation>新網格 波段</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="111"/>
<source>New Call</source>
<translation>未曾通聯過</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="112"/>
<source>New Call on Band</source>
<translation>未曾通聯過 波段</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="113"/>
<source>New Continent</source>
<translation>新大洲</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="114"/>
<source>New Continent on Band</source>
<translation>新大洲 波段</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="115"/>
<source>New CQ Zone</source>
<translation>新 CQ 區</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="116"/>
<source>New CQ Zone on Band</source>
<translation>新 CQ 區 波段</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="117"/>
<source>New ITU Zone</source>
<translation>新 ITU 區</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="118"/>
<source>New ITU Zone on Band</source>
<translation>新 ITU 區 波段</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="119"/>
<source>LoTW User</source>
<translation>LoTW用戶</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="169"/>
<source>f/g unset</source>
<translation>字体颜色未設定</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="171"/>
<source>b/g unset</source>
<translation>背景顏色未設定</translation>
</message>
<message>
<location filename="../models/DecodeHighlightingModel.cpp" line="244"/>
<source>Highlight Type</source>
<translation>突出顯示類型</translation>
</message>
</context>
<context>
<name>Designer</name>
<message>
<location filename="../WFPalette.cpp" line="189"/>
<source>&amp;Delete</source>
<translation>刪除(&amp;D)</translation>
</message>
<message>
<location filename="../WFPalette.cpp" line="198"/>
<source>&amp;Insert ...</source>
<translation>插入(&amp;I) ...</translation>
</message>
<message>
<location filename="../WFPalette.cpp" line="206"/>
<source>Insert &amp;after ...</source>
<translation>插入之後(&amp;a)...</translation>
</message>
<message>
<location filename="../WFPalette.cpp" line="221"/>
<source>Import Palette</source>
<translation>導入調色板</translation>
</message>
<message>
<location filename="../WFPalette.cpp" line="221"/>
<location filename="../WFPalette.cpp" line="232"/>
<source>Palettes (*.pal)</source>
<translation>調色板 (*.pal)</translation>
</message>
<message>
<location filename="../WFPalette.cpp" line="232"/>
<source>Export Palette</source>
<translation>導出調色板</translation>
</message>
</context>
<context>
<name>Dialog</name>
<message>
<location filename="../WSPR/WSPRBandHopping.cpp" line="116"/>
<source>Gray time:</source>
<translation>灰線時間:</translation>
</message>
</context>
<context>
<name>Directory</name>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="51"/>
<source>File</source>
<translation>檔案</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="51"/>
<source>Progress</source>
<translation>進度</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="113"/>
<location filename="../SampleDownloader/Directory.cpp" line="189"/>
<source>URL Error</source>
<translation>網址出錯誤</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="114"/>
<location filename="../SampleDownloader/Directory.cpp" line="190"/>
<source>Invalid URL:
&quot;%1&quot;</source>
<translation>無效的網址:
&quot;%1&quot;</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="132"/>
<location filename="../SampleDownloader/Directory.cpp" line="139"/>
<location filename="../SampleDownloader/Directory.cpp" line="207"/>
<location filename="../SampleDownloader/Directory.cpp" line="213"/>
<location filename="../SampleDownloader/Directory.cpp" line="219"/>
<location filename="../SampleDownloader/Directory.cpp" line="225"/>
<location filename="../SampleDownloader/Directory.cpp" line="232"/>
<source>JSON Error</source>
<translation>JSON出錯誤</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="133"/>
<source>Contents file syntax error %1 at character offset %2</source>
<translation>內容檔案語法出錯誤 %1 字符偏移量 %2</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="140"/>
<source>Contents file top level must be a JSON array</source>
<translation>內容檔案頂層必須是JSON數組</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="151"/>
<source>File System Error</source>
<translation>檔案系統出錯誤</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="152"/>
<source>Failed to open &quot;%1&quot;
Error: %2 - %3</source>
<translation>未能開啟 &quot;%1&quot;
錯誤: %2 - %3</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="208"/>
<source>Contents entries must be a JSON array</source>
<translation>輸入內容必須是 JSON 數組</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="214"/>
<source>Contents entries must have a valid type</source>
<translation>輸入內容必須具有有效的類型</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="220"/>
<source>Contents entries must have a valid name</source>
<translation>輸入內容必須具有有效的名稱</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="226"/>
<source>Contents entries must be JSON objects</source>
<translation>輸入內容必須是 JSON 對象</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="233"/>
<source>Contents directories must be relative and within &quot;%1&quot;</source>
<translation>目錄內容必須是相對的並且在 &quot;%1&quot;</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="318"/>
<source>Network Error</source>
<translation>網絡出錯誤</translation>
</message>
<message>
<location filename="../SampleDownloader/Directory.cpp" line="318"/>
<source>Authentication required</source>
<translation>需要認證</translation>
</message>
</context>
<context>
<name>DisplayText</name>
<message>
<location filename="../widgets/displaytext.cpp" line="29"/>
<source>&amp;Erase</source>
<translation>擦除(&amp;E)</translation>
</message>
</context>
<context>
<name>EchoGraph</name>
<message>
<location filename="../widgets/echograph.ui" line="26"/>
<location filename="../widgets/echograph.cpp" line="17"/>
<source>Echo Graph</source>
<translation>回波圖</translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="101"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Compression factor for frequency scale&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;頻率刻度的壓縮係數&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="104"/>
<source>Bins/Pixel </source>
<translation>點/像素 </translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="117"/>
<source>Gain</source>
<translation>增益</translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="124"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Echo spectrum gain&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;回波頻譜增益&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="156"/>
<source>Zero</source>
<translation>零度</translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="163"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Echo spectrum zero&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;回波頻譜零度&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="201"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Smoothing of echo spectrum&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;回波頻譜平滑&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="204"/>
<source>Smooth </source>
<translation>平滑 </translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="236"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Number of echo transmissions averaged&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;平均回波傳輸次數&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="239"/>
<source>N: 0</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="255"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Click to cycle through a sequence of colors and line widths.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;單擊以循環顯示一系列顏色和線條寬度.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/echograph.ui" line="258"/>
<source>Colors</source>
<translation>顏色</translation>
</message>
</context>
<context>
<name>EmulateSplitTransceiver</name>
<message>
<location filename="../Transceiver/EmulateSplitTransceiver.cpp" line="48"/>
<source>Emulated split mode requires rig to be in simplex mode</source>
<translation>模擬異頻模式要求無線電設備處於單工模式</translation>
</message>
</context>
<context>
<name>EqualizationToolsDialog::impl</name>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="302"/>
<source>Phase</source>
<translation>相位</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="307"/>
<location filename="../EqualizationToolsDialog.cpp" line="348"/>
<source>Freq (Hz)</source>
<translation>頻率 (Hz)</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="309"/>
<source>Phase (Π)</source>
<translation>相位 (Π)</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="311"/>
<source>Delay (ms)</source>
<translation>延遲 (ms)</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="320"/>
<source>Measured</source>
<translation>測量</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="325"/>
<source>Proposed</source>
<translation>提出</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="330"/>
<source>Current</source>
<translation>當前</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="333"/>
<source>Group Delay</source>
<translation>組延遲</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="344"/>
<source>Amplitude</source>
<translation>振幅</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="350"/>
<source>Relative Power (dB)</source>
<translation>相對功率 (分貝)</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="356"/>
<source>Reference</source>
<translation>參考</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="363"/>
<source>Phase ...</source>
<translation>相位 ...</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="364"/>
<source>Refresh</source>
<translation>刷新</translation>
</message>
<message>
<location filename="../EqualizationToolsDialog.cpp" line="365"/>
<source>Discard Measured</source>
<translation>丟棄測量</translation>
</message>
</context>
<context>
<name>ExistingNameDialog</name>
<message>
<location filename="../MultiSettings.cpp" line="123"/>
<source>Configuration to Clone From</source>
<translation>從克隆中的設定</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="128"/>
<source>&amp;Source Configuration Name:</source>
<translation>來源設定名稱(&amp;S):</translation>
</message>
</context>
<context>
<name>ExportCabrillo</name>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="6"/>
<source>Dialog</source>
<translation>對話框</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="14"/>
<source>Location:</source>
<translation>位置:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="24"/>
<source>SNJ</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="34"/>
<source>Contest:</source>
<translation>競賽:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="44"/>
<source>ARRL-RTTY</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="54"/>
<source>Callsign:</source>
<translation>呼號:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="74"/>
<source>Category-Operator: </source>
<translation>類別-操作員: </translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="84"/>
<source>SINGLE-OP</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="94"/>
<source>Category-Transmitter:</source>
<translation>類別-發射機:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="104"/>
<source>ONE</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="114"/>
<source>Category-Power:</source>
<translation>類別-功率:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="124"/>
<source>LOW</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="134"/>
<source>Category-Assisted:</source>
<translation>類別-協助:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="144"/>
<source>NON-ASSISTED</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="154"/>
<source>Category-Band:</source>
<translation>類別-波段:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="164"/>
<source>ALL</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="174"/>
<source>Claimed-Score:</source>
<translation>聲稱-得分:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="194"/>
<source>Operators:</source>
<translation>操作員:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="214"/>
<source>Club:</source>
<translation>俱樂部:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="231"/>
<source>Name:</source>
<translation>姓名:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.ui" line="251"/>
<location filename="../widgets/ExportCabrillo.ui" line="268"/>
<source>Address:</source>
<translation>地址:</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.cpp" line="78"/>
<source>Save Log File</source>
<translation>儲存日誌檔案</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.cpp" line="80"/>
<source>Cabrillo Log (*.cbr)</source>
<translation>卡布里略日誌 (*.cbr)</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.cpp" line="105"/>
<source>Cannot open &quot;%1&quot; for writing: %2</source>
<translation>無法開啟 &quot;%1&quot; 用於寫入: %2</translation>
</message>
<message>
<location filename="../widgets/ExportCabrillo.cpp" line="107"/>
<source>Export Cabrillo File Error</source>
<translation>匯出卡布裡略檔案錯誤</translation>
</message>
</context>
<context>
<name>FastGraph</name>
<message>
<location filename="../widgets/fastgraph.ui" line="14"/>
<location filename="../widgets/fastgraph.cpp" line="24"/>
<source>Fast Graph</source>
<translation>快速圖</translation>
</message>
<message>
<location filename="../widgets/fastgraph.ui" line="103"/>
<source>Waterfall gain</source>
<translation>瀑布增益</translation>
</message>
<message>
<location filename="../widgets/fastgraph.ui" line="138"/>
<source>Waterfall zero</source>
<translation>瀑布零度</translation>
</message>
<message>
<location filename="../widgets/fastgraph.ui" line="173"/>
<source>Spectrum zero</source>
<translation>頻譜零度</translation>
</message>
<message>
<location filename="../widgets/fastgraph.ui" line="208"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Set reasonable levels for gain and zero sliders.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;為增益和零滑塊設置合理的水平.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/fastgraph.ui" line="211"/>
<source>Auto Level</source>
<translation>自動電平</translation>
</message>
</context>
<context>
<name>FoxLog::impl</name>
<message>
<location filename="../models/FoxLog.cpp" line="123"/>
<source>Date &amp; Time(UTC)</source>
<translation>日期與時間(UTC)</translation>
</message>
<message>
<location filename="../models/FoxLog.cpp" line="124"/>
<source>Call</source>
<translation>呼號</translation>
</message>
<message>
<location filename="../models/FoxLog.cpp" line="125"/>
<source>Grid</source>
<translation>網格</translation>
</message>
<message>
<location filename="../models/FoxLog.cpp" line="126"/>
<source>Sent</source>
<translation>發出</translation>
</message>
<message>
<location filename="../models/FoxLog.cpp" line="127"/>
<source>Rcvd</source>
<translation>接收</translation>
</message>
<message>
<location filename="../models/FoxLog.cpp" line="128"/>
<source>Band</source>
<translation>波段</translation>
</message>
</context>
<context>
<name>FoxLogWindow</name>
<message>
<location filename="../widgets/FoxLogWindow.ui" line="17"/>
<source>Fox Log</source>
<translation>狐狸日誌</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.ui" line="26"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Right-click here for available actions.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;按右鍵此處查看可用操作.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.ui" line="51"/>
<source>Callers:</source>
<translation>呼叫者:</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.ui" line="58"/>
<location filename="../widgets/FoxLogWindow.ui" line="72"/>
<location filename="../widgets/FoxLogWindow.ui" line="99"/>
<source>N</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.ui" line="65"/>
<source>In progress:</source>
<translation>正在進行中:</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.ui" line="92"/>
<source>Rate:</source>
<translation>率:</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.cpp" line="55"/>
<source>&amp;Export ADIF ...</source>
<translation>導出 ADIF(&amp;E) ...</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.cpp" line="59"/>
<source>Export ADIF Log File</source>
<translation>導出 ADIF 日誌檔案</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.cpp" line="61"/>
<source>ADIF Log (*.adi)</source>
<translation>ADIF 日誌 (*.adi)</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.cpp" line="73"/>
<source>Export ADIF File Error</source>
<translation>導出 ADIF 日誌檔案錯誤</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.cpp" line="74"/>
<source>Cannot open &quot;%1&quot; for writing: %2</source>
<translation>無法打開 &quot;%1&quot; 以進行寫入: %2</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.cpp" line="80"/>
<source>&amp;Reset ...</source>
<translation>重置(&amp;R) ...</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.cpp" line="84"/>
<source>Confirm Reset</source>
<translation>確認重置</translation>
</message>
<message>
<location filename="../widgets/FoxLogWindow.cpp" line="85"/>
<source>Are you sure you want to erase file FoxQSO.txt and start a new Fox log?</source>
<translation>是否確實要擦除 FoxQSO.txt 檔案並啟動新的 狐狸日誌?</translation>
</message>
</context>
<context>
<name>FrequencyDialog</name>
<message>
<location filename="../Configuration.cpp" line="263"/>
<source>Add Frequency</source>
<translation>添加頻率</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="268"/>
<source>IARU &amp;Region:</source>
<translation>IA&amp;RU 區域:</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="269"/>
<source>&amp;Mode:</source>
<translation>模式(&amp;M):</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="270"/>
<source>&amp;Frequency (MHz):</source>
<translation>頻率 (M&amp;Hz):</translation>
</message>
</context>
<context>
<name>FrequencyList_v2</name>
<message>
<location filename="../models/FrequencyList.cpp" line="665"/>
<location filename="../models/FrequencyList.cpp" line="821"/>
<source>IARU Region</source>
<translation>IARU 區域</translation>
</message>
<message>
<location filename="../models/FrequencyList.cpp" line="686"/>
<location filename="../models/FrequencyList.cpp" line="822"/>
<source>Mode</source>
<translation>模式</translation>
</message>
<message>
<location filename="../models/FrequencyList.cpp" line="714"/>
<location filename="../models/FrequencyList.cpp" line="823"/>
<source>Frequency</source>
<translation>頻率</translation>
</message>
<message>
<location filename="../models/FrequencyList.cpp" line="741"/>
<location filename="../models/FrequencyList.cpp" line="824"/>
<source>Frequency (MHz)</source>
<translation>頻率 (MHz)</translation>
</message>
</context>
<context>
<name>HRDTransceiver</name>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="125"/>
<location filename="../Transceiver/HRDTransceiver.cpp" line="150"/>
<source>Failed to connect to Ham Radio Deluxe
</source>
<translation>無法連接到 Ham Radio Deluxe
</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="159"/>
<source>Failed to open file &quot;%1&quot;: %2.</source>
<translation>無法開啟檔案 &quot;%1&quot;: %2.</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="174"/>
<location filename="../Transceiver/HRDTransceiver.cpp" line="198"/>
<source>Ham Radio Deluxe: no rig found</source>
<translation>Ham Radio Deluxe: 未找到無線電設備</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="422"/>
<source>Ham Radio Deluxe: rig doesn&apos;t support mode</source>
<translation>Ham Radio Deluxe: 無線電設備不支持模式</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="441"/>
<source>Ham Radio Deluxe: sent an unrecognised mode</source>
<translation>Ham Radio Deluxe: 發送了一個無法識別的模式</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="476"/>
<source>Ham Radio Deluxe: item not found in %1 dropdown list</source>
<translation>Ham Radio Deluxe: 在 %1 下拉清單中找不到項目</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="520"/>
<source>Ham Radio Deluxe: button not available</source>
<translation>Ham Radio Deluxe: 按鈕不可用</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="886"/>
<source>Ham Radio Deluxe didn&apos;t respond as expected</source>
<translation>Ham Radio Deluxe 沒有如預期的那樣響應</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="1035"/>
<source>Ham Radio Deluxe: rig has disappeared or changed</source>
<translation>Ham Radio Deluxe: 無線電設備已經消失或改變</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="1050"/>
<source>Ham Radio Deluxe send command &quot;%1&quot; failed %2
</source>
<translation>Ham Radio Deluxe 發送命令 &quot;%1&quot; 失敗 %2
</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="1063"/>
<location filename="../Transceiver/HRDTransceiver.cpp" line="1076"/>
<source>Ham Radio Deluxe: failed to write command &quot;%1&quot;</source>
<translation>Ham Radio Deluxe: 無法寫入命令 &quot;%1&quot;</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="1093"/>
<source>Ham Radio Deluxe sent an invalid reply to our command &quot;%1&quot;</source>
<translation>Ham Radio Deluxe 對我們的命令發出了無效的回復 &quot;%1&quot;</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="1147"/>
<source>Ham Radio Deluxe failed to reply to command &quot;%1&quot; %2
</source>
<translation>Ham Radio Deluxe 無法回復命令 &quot;%1&quot; %2
</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="1157"/>
<source>Ham Radio Deluxe retries exhausted sending command &quot;%1&quot;</source>
<translation>Ham Radio Deluxe 發送命令重試失敗 &quot;%1&quot;</translation>
</message>
<message>
<location filename="../Transceiver/HRDTransceiver.cpp" line="1170"/>
<source>Ham Radio Deluxe didn&apos;t respond to command &quot;%1&quot; as expected</source>
<translation>Ham Radio Deluxe 沒有回應預期的命令 &quot;%1&quot;</translation>
</message>
</context>
<context>
<name>HamlibTransceiver</name>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="202"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="256"/>
<source>Hamlib initialisation error</source>
<translation>Hamlib 初始化出錯誤</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="278"/>
<source>Hamlib settings file error: %1 at character offset %2</source>
<translation>Hamlib 設置檔案出錯誤: %1 字符偏移量 %2</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="284"/>
<source>Hamlib settings file error: top level must be a JSON object</source>
<translation>Hamlib 設置檔案出錯誤: 頂層必須是 JSON 對象</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="296"/>
<source>Hamlib settings file error: config must be a JSON object</source>
<translation>Hamlib 設置檔案出錯誤: 配置必須是JSON對象</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="361"/>
<source>Unsupported CAT type</source>
<translation>不支持 CAT 類型</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="414"/>
<source>Hamlib error: %1 while %2</source>
<translation>Hamlib 出錯誤: %1 當 %2</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="424"/>
<source>opening connection to rig</source>
<translation>開啟連接無線電設備</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="471"/>
<source>getting current frequency</source>
<translation>獲取當前頻率</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="475"/>
<source>getting current mode</source>
<translation>獲取當前模式</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="504"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="524"/>
<source>exchanging VFOs</source>
<translation>在 VFOs 之間切換</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="512"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="983"/>
<source>getting other VFO frequency</source>
<translation>獲取其他 VFO 頻率</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="516"/>
<source>getting other VFO mode</source>
<translation>獲取其他 VFO 模式</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="529"/>
<source>setting current VFO</source>
<translation>設置當前 VFO</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="538"/>
<source>getting frequency</source>
<translation>獲取頻率</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="542"/>
<source>getting mode</source>
<translation>獲取模式</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="559"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="923"/>
<source>getting current VFO</source>
<translation>獲取當前 VFO</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="603"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="611"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="625"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="962"/>
<source>getting current VFO frequency</source>
<translation>獲取當前 VFO 頻率</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="609"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="624"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="631"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="710"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="728"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="789"/>
<source>setting frequency</source>
<translation>設置頻率</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="718"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="796"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="868"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="881"/>
<source>getting current VFO mode</source>
<translation>獲取當前 VFO 模式</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="724"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="733"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="802"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="874"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="887"/>
<source>setting current VFO mode</source>
<translation>設置當前 VFO 模式</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="776"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="845"/>
<source>setting/unsetting split mode</source>
<translation>設置/取消 設置異頻模式</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="787"/>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="827"/>
<source>setting split mode</source>
<translation>設置異頻模式</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="815"/>
<source>setting split TX frequency and mode</source>
<translation>設置異頻發射頻率和模式</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="820"/>
<source>setting split TX frequency</source>
<translation>設置異頻發射頻率</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="892"/>
<source>getting split TX VFO mode</source>
<translation>獲得異頻發射 VFO 模式</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="899"/>
<source>setting split TX VFO mode</source>
<translation>設置異頻發射 VFO 模式</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="1020"/>
<source>getting PTT state</source>
<translation>獲取PTT 狀態</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="1051"/>
<source>setting PTT on</source>
<translation>設置PTT 開啟</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="1059"/>
<source>setting PTT off</source>
<translation>設置PTT 關閉</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="1071"/>
<source>setting a configuration item</source>
<translation>設置配置項目</translation>
</message>
<message>
<location filename="../Transceiver/HamlibTransceiver.cpp" line="1081"/>
<source>getting a configuration item</source>
<translation>獲取配置項目</translation>
</message>
</context>
<context>
<name>HelpTextWindow</name>
<message>
<location filename="../widgets/HelpTextWindow.cpp" line="20"/>
<source>Help file error</source>
<translation>說明檔案錯誤</translation>
</message>
<message>
<location filename="../widgets/HelpTextWindow.cpp" line="21"/>
<source>Cannot open &quot;%1&quot; for reading</source>
<translation>無法開啟 &quot;%1&quot; 以進行閱讀</translation>
</message>
<message>
<location filename="../widgets/HelpTextWindow.cpp" line="22"/>
<source>Error: %1</source>
<translation>錯誤: %1</translation>
</message>
</context>
<context>
<name>IARURegions</name>
<message>
<location filename="../models/IARURegions.cpp" line="58"/>
<location filename="../models/IARURegions.cpp" line="85"/>
<source>IARU Region</source>
<translation>IARU 區域</translation>
</message>
</context>
<context>
<name>LogQSO</name>
<message>
<location filename="../widgets/logqso.ui" line="28"/>
<source>Click OK to confirm the following QSO:</source>
<translation>單擊 確定 確認以下通聯:</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="44"/>
<source>Call</source>
<translation>呼號</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="66"/>
<source>Start</source>
<translation>開始</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="82"/>
<location filename="../widgets/logqso.ui" line="117"/>
<source>dd/MM/yyyy HH:mm:ss</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="101"/>
<source>End</source>
<translation>結束</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="140"/>
<source>Mode</source>
<translation>模式</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="169"/>
<source>Band</source>
<translation>波段</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="198"/>
<source>Rpt Sent</source>
<translation>發出報告</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="227"/>
<source>Rpt Rcvd</source>
<translation>接收報告</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="256"/>
<source>Grid</source>
<translation>網格</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="288"/>
<source>Name</source>
<translation>姓名</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="311"/>
<source>Tx power</source>
<translation>發射功率</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="321"/>
<location filename="../widgets/logqso.ui" line="354"/>
<source>Retain</source>
<translation>保留</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="340"/>
<source>Comments</source>
<translation>注釋</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="370"/>
<source>Operator</source>
<translation>操作員</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="404"/>
<source>Exch sent</source>
<translation>交換發送</translation>
</message>
<message>
<location filename="../widgets/logqso.ui" line="434"/>
<source>Rcvd</source>
<translation>接收</translation>
</message>
<message>
<location filename="../widgets/logqso.cpp" line="155"/>
<location filename="../widgets/logqso.cpp" line="163"/>
<source>Invalid QSO Data</source>
<translation>無效的通聯資料</translation>
</message>
<message>
<location filename="../widgets/logqso.cpp" line="156"/>
<source>Check exchange sent and received</source>
<translation>選擇已交換的發出及接收</translation>
</message>
<message>
<location filename="../widgets/logqso.cpp" line="164"/>
<source>Check all fields</source>
<translation>檢查所有欄位</translation>
</message>
<message>
<location filename="../widgets/logqso.cpp" line="172"/>
<source>Log file error</source>
<translation>日誌檔案錯誤</translation>
</message>
<message>
<location filename="../widgets/logqso.cpp" line="173"/>
<source>Cannot open &quot;%1&quot; for append</source>
<translation>無法開啟 &quot;%1&quot; 的附加</translation>
</message>
<message>
<location filename="../widgets/logqso.cpp" line="174"/>
<source>Error: %1</source>
<translation>錯誤: %1</translation>
</message>
</context>
<context>
<name>LotWUsers::impl</name>
<message>
<location filename="../Network/LotWUsers.cpp" line="109"/>
<source>Network Error - SSL/TLS support not installed, cannot fetch:
&apos;%1&apos;</source>
<translation>網路錯誤 - SSL/TLS 支援未安裝, 無法提取:
&apos;%1&apos;</translation>
</message>
<message>
<location filename="../Network/LotWUsers.cpp" line="121"/>
<source>Network Error - Too many redirects:
&apos;%1&apos;</source>
<translation>網路錯誤 - 重定向太多:
&apos;%1&apos;</translation>
</message>
<message>
<location filename="../Network/LotWUsers.cpp" line="135"/>
<source>Network Error:
%1</source>
<translation>網路錯誤:
%1</translation>
</message>
<message>
<location filename="../Network/LotWUsers.cpp" line="144"/>
<source>File System Error - Cannot commit changes to:
&quot;%1&quot;</source>
<translation>檔案系統錯誤 - 無法將變更提交到:
&quot;%1&quot;</translation>
</message>
<message>
<location filename="../Network/LotWUsers.cpp" line="181"/>
<source>File System Error - Cannot open file:
&quot;%1&quot;
Error(%2): %3</source>
<translation>檔案系統錯誤 - 無法開啟檔案:
&quot;%1&quot;
錯誤(%2): %3</translation>
</message>
<message>
<location filename="../Network/LotWUsers.cpp" line="190"/>
<source>File System Error - Cannot write to file:
&quot;%1&quot;
Error(%2): %3</source>
<translation>檔案系統錯誤 - 無法寫入檔案:
&quot;%1&quot;
錯誤(%2): %3</translation>
</message>
</context>
<context>
<name>MainWindow</name>
<message>
<location filename="../widgets/mainwindow.ui" line="20"/>
<source>WSJT-X by K1JT</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="50"/>
<location filename="../widgets/mainwindow.cpp" line="5794"/>
<location filename="../widgets/mainwindow.cpp" line="5842"/>
<location filename="../widgets/mainwindow.cpp" line="6000"/>
<location filename="../widgets/mainwindow.cpp" line="6040"/>
<location filename="../widgets/mainwindow.cpp" line="6088"/>
<location filename="../widgets/mainwindow.cpp" line="6213"/>
<source>Band Activity</source>
<translation>波段活動</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="139"/>
<location filename="../widgets/mainwindow.ui" line="283"/>
<source>UTC dB DT Freq Dr </source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="194"/>
<location filename="../widgets/mainwindow.cpp" line="5793"/>
<location filename="../widgets/mainwindow.cpp" line="5837"/>
<location filename="../widgets/mainwindow.cpp" line="6001"/>
<location filename="../widgets/mainwindow.cpp" line="6041"/>
<location filename="../widgets/mainwindow.cpp" line="6089"/>
<source>Rx Frequency</source>
<translation>接收信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="330"/>
<source>CQ only</source>
<translation>只顯示 CQ</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="343"/>
<source>Enter this QSO in log</source>
<translation>在日誌中輸入此通聯紀錄</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="346"/>
<source>Log &amp;QSO</source>
<translation>紀錄通聯(&amp;Q)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="359"/>
<source>Stop monitoring</source>
<translation>停止監聽</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="362"/>
<source>&amp;Stop</source>
<translation>停止(&amp;S)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="375"/>
<source>Toggle monitoring On/Off</source>
<translation>切換監聽開/關</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="389"/>
<source>&amp;Monitor</source>
<translation>监听(&amp;M)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="408"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Erase right window. Double-click to erase both windows.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;擦除右視窗. 雙擊可擦除兩個視窗.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="411"/>
<source>Erase right window. Double-click to erase both windows.</source>
<translation>擦除右視窗. 雙擊可擦除兩個視窗.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="414"/>
<source>&amp;Erase</source>
<translation>擦除(&amp;E)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="424"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Clear the accumulating message average.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;清除累積信息平均值.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="427"/>
<source>Clear the accumulating message average.</source>
<translation>清除累積信息平均值.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="430"/>
<source>Clear Avg</source>
<translation>清除平均</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="443"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Decode most recent Rx period at QSO Frequency&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;在通聯頻率下解碼最近的接收週期&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="446"/>
<source>Decode most recent Rx period at QSO Frequency</source>
<translation>在通聯頻率下解碼最近的接收週期</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="460"/>
<source>&amp;Decode</source>
<translation>解碼(&amp;D)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="476"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Toggle Auto-Tx On/Off&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;切換自動發射 開/關&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="479"/>
<source>Toggle Auto-Tx On/Off</source>
<translation>切換自動發射 開/關</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="493"/>
<source>E&amp;nable Tx</source>
<translation>啟用發射(&amp;n)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="509"/>
<source>Stop transmitting immediately</source>
<translation>立即停止發射</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="512"/>
<source>&amp;Halt Tx</source>
<translation>停止發射(&amp;H)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="519"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Toggle a pure Tx tone On/Off&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;切換發射純音調 開/關&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="522"/>
<source>Toggle a pure Tx tone On/Off</source>
<translation>切換發射純音調 開/關</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="536"/>
<source>&amp;Tune</source>
<translation>調諧(&amp;T)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="546"/>
<source>Menus</source>
<translation>選單</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="566"/>
<source>USB dial frequency</source>
<translation>上邊帶頻率</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="581"/>
<source>14.078 000</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="606"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;30dB recommended when only noise present&lt;br/&gt;Green when good&lt;br/&gt;Red when clipping may occur&lt;br/&gt;Yellow when too low&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;當只存在噪音時建議30dB&lt;br/&gt;綠色好&lt;br/&gt;紅色時可能發生剪切&lt;br/&gt;黃色時太低&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="609"/>
<source>Rx Signal</source>
<translation>接收信號</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="612"/>
<source>30dB recommended when only noise present
Green when good
Red when clipping may occur
Yellow when too low</source>
<translation>當只存在噪音時建議30dB
綠色好
紅色時可能發生剪切
黃色時太低</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="722"/>
<source>DX Call</source>
<translation>DX 呼號</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="814"/>
<source>DX Grid</source>
<translation>DX 網格</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="833"/>
<source>Callsign of station to be worked</source>
<translation>正在通聯的電臺呼號</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="846"/>
<source>Search for callsign in database</source>
<translation>在數據庫中搜索此呼號的網格數據</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="849"/>
<source>&amp;Lookup</source>
<translation>檢索(&amp;L)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="856"/>
<source>Locator of station to be worked</source>
<translation>通聯中的電臺定位</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="878"/>
<source>Az: 251 16553 km</source>
<translation>角度: 251 16553 公里</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="891"/>
<source>Add callsign and locator to database</source>
<translation>增加這呼號及網格的數據在數據庫中</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="894"/>
<source>Add</source>
<translation>增加</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="904"/>
<source> Pwr</source>
<translation> 功率</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="914"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;If orange or red there has been a rig control failure, click to reset and read the dial frequency. S implies split mode.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;如果橙色或紅色出現表示無線電設備控制故障, 請單擊以重置並讀取頻率. S 表示異頻模式.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="917"/>
<source>If orange or red there has been a rig control failure, click to reset and read the dial frequency. S implies split mode.</source>
<translation>如果橙色或红色出现表示无线电设备控制故障, 请单击以重置并读取频率. S 表示异频模式.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="946"/>
<source>?</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="953"/>
<source>Adjust Tx audio level</source>
<translation>調整發射音效電平</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="981"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Select operating band or enter frequency in MHz or enter kHz increment followed by k.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇工作頻段或輸入 MHz 頻率或輸入 kHz 增量,然後輸入 k.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="984"/>
<source>Frequency entry</source>
<translation>輸入頻率</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="987"/>
<source>Select operating band or enter frequency in MHz or enter kHz increment followed by k.</source>
<translation>選擇工作頻段或輸入 MHz 頻率或輸入 kHz 增量,然後輸入 k.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1029"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p align=&quot;center&quot;&gt; 2015 Jun 17 &lt;/p&gt;&lt;p align=&quot;center&quot;&gt; 01:23:45 &lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1078"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check to keep Tx frequency fixed when double-clicking on decoded text.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;按兩下解碼文字時, 選擇以保持發射頻率固定.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1081"/>
<source>Check to keep Tx frequency fixed when double-clicking on decoded text.</source>
<translation>按兩下解碼文字時, 選擇以保持發射頻率固定.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1084"/>
<source>Hold Tx Freq</source>
<translation>保持發射頻率</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1091"/>
<source>Audio Rx frequency</source>
<translation>音頻接收頻率</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1097"/>
<location filename="../widgets/mainwindow.ui" line="1533"/>
<location filename="../widgets/mainwindow.ui" line="2558"/>
<source> Hz</source>
<translation> 赫茲</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1100"/>
<source>Rx </source>
<translation>接收 </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1136"/>
<source>Set Tx frequency to Rx Frequency</source>
<translation>將發射頻率設定為接收頻率</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1139"/>
<source></source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1146"/>
<source>Frequency tolerance (Hz)</source>
<translation>頻率容差 (Hz)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1152"/>
<source>F Tol </source>
<translation>容差 </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1186"/>
<source>Set Rx frequency to Tx Frequency</source>
<translation>將接收頻率位置移往發射頻率位置</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1189"/>
<source></source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1198"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Synchronizing threshold. Lower numbers accept weaker sync signals.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;同步閾值. 較低的數位接受較弱的同步訊號.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1201"/>
<source>Synchronizing threshold. Lower numbers accept weaker sync signals.</source>
<translation>同步閾值. 較低的數位接受較弱的同步訊號.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1207"/>
<source>Sync </source>
<translation>同步 </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1225"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check to use short-format messages.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇以使用短格式信息.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1228"/>
<source>Check to use short-format messages.</source>
<translation>選擇以使用短格式信息.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1231"/>
<source>Sh</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1238"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check to enable JT9 fast modes&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇以開啟 JT9 快速模式&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1241"/>
<source>Check to enable JT9 fast modes</source>
<translation>選擇以開啟 JT9 快速模式</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1244"/>
<location filename="../widgets/mainwindow.ui" line="2957"/>
<source>Fast</source>
<translation>快速</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1251"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check to enable automatic sequencing of Tx messages based on received messages.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇以開啟接收到信息自動排序發射信息.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1254"/>
<source>Check to enable automatic sequencing of Tx messages based on received messages.</source>
<translation>選擇以開啟接收到信息自動排序發射信息.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1257"/>
<source>Auto Seq</source>
<translation>自動程序</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1264"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check to call the first decoded responder to my CQ.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇以呼叫第一個解碼的回應器到我的 CQ.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1267"/>
<source>Check to call the first decoded responder to my CQ.</source>
<translation>選擇以呼叫第一個解碼的回應我的 CQ.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1270"/>
<source>Call 1st</source>
<translation>呼叫第一個解碼</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1280"/>
<source>Check to generate &quot;@1250 (SEND MSGS)&quot; in Tx6.</source>
<translation>選擇以產生 &quot;@1250 (傳送信息)&quot; 在發射6.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1283"/>
<source>Tx6</source>
<translation>發射6</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1292"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check to Tx in even-numbered minutes or sequences, starting at 0; uncheck for odd sequences.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇發射以偶數分鐘或序列, 從 0 開始; 取消選擇以奇數序列.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1295"/>
<source>Check to Tx in even-numbered minutes or sequences, starting at 0; uncheck for odd sequences.</source>
<translation>選擇發射以偶數分鐘或序列, 從 0 開始; 取消選擇以奇數序列.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1298"/>
<source>Tx even/1st</source>
<translation>發射偶數/第一</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1310"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Frequency to call CQ on in kHz above the current MHz&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;呼叫CQ 的頻率以 kHz 高於目前的 MHz&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1313"/>
<source>Frequency to call CQ on in kHz above the current MHz</source>
<translation>呼叫CQ 的頻率以 kHz 高於目前的 MHz</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1316"/>
<source>Tx CQ </source>
<translation>發射 CQ </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1335"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check this to call CQ on the &amp;quot;Tx CQ&amp;quot; frequency. Rx will be on the current frequency and the CQ message wiill include the current Rx frequency so callers know which frequency to reply on.&lt;/p&gt;&lt;p&gt;Not available to nonstandard callsign holders.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;勾選此項, 以發射CQ呼叫. 接收將在當前頻率上,CQ信息將顯示在當前的接收資訊視窗, 以便呼叫者知道回覆的頻率.&lt;/p&gt;&lt;p&gt; 不適用於非標準呼號持有者.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1338"/>
<source>Check this to call CQ on the &quot;Tx CQ&quot; frequency. Rx will be on the current frequency and the CQ message wiill include the current Rx frequency so callers know which frequency to reply on.
Not available to nonstandard callsign holders.</source>
<translation>勾選此項, 以發射CQ呼叫. 接收將在當前頻率上,CQ信息將顯示在當前的接收資訊視窗, 以便呼叫者知道回覆的頻率.
不適用於非標準呼號持有者.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1349"/>
<source>Rx All Freqs</source>
<translation>接收所有頻率</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1358"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Submode determines tone spacing; A is narrowest.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;子模式確定音調間距; A 最窄.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1361"/>
<source>Submode determines tone spacing; A is narrowest.</source>
<translation>子模式確定音調間距; A 最窄.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1367"/>
<source>Submode </source>
<translation>子模式 </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1394"/>
<location filename="../widgets/mainwindow.cpp" line="5864"/>
<source>Fox</source>
<translation>狐狸</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1404"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check to monitor Sh messages.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇以監視速記信息.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1407"/>
<source>Check to monitor Sh messages.</source>
<translation>選擇以監視速記信息.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1410"/>
<source>SWL</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1428"/>
<source>Best S+P</source>
<translation>最佳 S+P</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1438"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check this to start recording calibration data.&lt;br/&gt;While measuring calibration correction is disabled.&lt;br/&gt;When not checked you can view the calibration results.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;勾選可開始紀錄校準資料.&lt;br/&gt;當測量校準校正被禁用時.&lt;br/&gt;未檢查時您可以查看校準結果.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1441"/>
<source>Check this to start recording calibration data.
While measuring calibration correction is disabled.
When not checked you can view the calibration results.</source>
<translation>勾選可開始紀錄校準資料.
當測量校準校正被禁用時.
未檢查時您可以查看校準結果.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1446"/>
<source>Measure</source>
<translation>測量</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1455"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Signal report: Signal-to-noise ratio in 2500 Hz reference bandwidth (dB).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;信號報告: 參考2500 Hz 頻寬 (dB) 中的信噪比.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1458"/>
<source>Signal report: Signal-to-noise ratio in 2500 Hz reference bandwidth (dB).</source>
<translation>信號報告: 參考2500 Hz 頻寬 (dB) 中的信噪比.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1464"/>
<source> Report </source>
<translation> 報告 </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1480"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Tx/Rx or Frequency calibration sequence length&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;發射/接收 或頻率校準序列長度&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1483"/>
<source>Tx/Rx or Frequency calibration sequence length</source>
<translation>發射/接收 或頻率校準序列長度</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1489"/>
<source> s</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1492"/>
<source>T/R </source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1517"/>
<source>Toggle Tx mode</source>
<translation>切換發射模式</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1520"/>
<source>Tx JT9 @</source>
<translation>發射 JT9 @</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1527"/>
<source>Audio Tx frequency</source>
<translation>音訊發射頻率</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1536"/>
<location filename="../widgets/mainwindow.ui" line="2561"/>
<source>Tx </source>
<translation>發射 </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1568"/>
<source>Tx# </source>
<translation>發射# </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1581"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Double-click on another caller to queue that call for your next QSO.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;按兩下另一個呼號以排隊呼叫您的下一個通聯.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1584"/>
<source>Double-click on another caller to queue that call for your next QSO.</source>
<translation>按兩下另一個呼號以排隊呼叫您的下一個通聯.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1587"/>
<source>Next Call</source>
<translation>下一個通聯</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1615"/>
<source>1</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1623"/>
<location filename="../widgets/mainwindow.ui" line="1701"/>
<location filename="../widgets/mainwindow.ui" line="1743"/>
<source>Send this message in next Tx interval</source>
<translation>在下一個發射間隔內發送此信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1632"/>
<source>Ctrl+2</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1639"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Send this message in next Tx interval&lt;/p&gt;&lt;p&gt;Double click to toggle the use of the Tx1 message to start a QSO with a station (not allowed for type 1 compound call holders)&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;在下一個發射間隔中傳送此訊息&lt;/p&gt;&lt;p&gt;按兩下以切換使用 發射 1 訊息以啟動電臺的通聯 (不允許 1 型複合呼叫持有者)&lt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1642"/>
<source>Send this message in next Tx interval
Double click to toggle the use of the Tx1 message to start a QSO with a station (not allowed for type 1 compound call holders)</source>
<translation>在下一個發射間隔中傳送此訊息
按兩下以切換使用 發射 1 訊息以啟動電臺的通聯 (不允許 1 型複合呼叫持有者)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1652"/>
<source>Ctrl+1</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1659"/>
<location filename="../widgets/mainwindow.ui" line="1759"/>
<location filename="../widgets/mainwindow.ui" line="1840"/>
<location filename="../widgets/mainwindow.ui" line="1863"/>
<source>Switch to this Tx message NOW</source>
<translation>立即切換到此發射信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1665"/>
<source>Tx &amp;2</source>
<translation>發射 &amp;2</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1668"/>
<source>Alt+2</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1678"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Switch to this Tx message NOW&lt;/p&gt;&lt;p&gt;Double click to toggle the use of the Tx1 message to start a QSO with a station (not allowed for type 1 compound call holders)&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;立即切換到此發射信息&lt;/p&gt;&lt;p&gt;按兩下以切換使用 發射 1 訊息以啟動電臺的通聯 (不允許 1 型複合呼叫持有者)&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1681"/>
<source>Switch to this Tx message NOW
Double click to toggle the use of the Tx1 message to start a QSO with a station (not allowed for type 1 compound call holders)</source>
<translation>立即切換到此發射信息
按兩下以切換使用 發射 1 訊息以啟動電臺的通聯 (不允許 1 型複合呼叫持有者)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1691"/>
<source>Tx &amp;1</source>
<translation>發射 &amp;1</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1694"/>
<source>Alt+1</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1710"/>
<source>Ctrl+6</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1723"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Send this message in next Tx interval&lt;/p&gt;&lt;p&gt;Double-click to reset to the standard 73 message&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;在下一個發射間隔內傳送此信息&lt;/p&gt;&lt;p&gt;雙擊可重置為標準 73 信息&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1726"/>
<source>Send this message in next Tx interval
Double-click to reset to the standard 73 message</source>
<translation>在下一個發射間隔內傳送此信息
雙擊可重置為標準 73 信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1736"/>
<source>Ctrl+5</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1752"/>
<source>Ctrl+3</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1765"/>
<source>Tx &amp;3</source>
<translation>發射 &amp;3</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1768"/>
<source>Alt+3</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1775"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Send this message in next Tx interval&lt;/p&gt;&lt;p&gt;Double-click to toggle between RRR and RR73 messages in Tx4 (not allowed for type 2 compound call holders)&lt;/p&gt;&lt;p&gt;RR73 messages should only be used when you are reasonably confident that no message repetitions will be required&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;在下一個發射間隔內傳送此信息&lt;/p&gt;&lt;p&gt;按兩下可在 發射4 中的 RRR 和 RR73 信息之間切換 (不允許類型 2 複合呼叫持有者)&lt;/p&gt;&lt;p&gt;RR73 信息僅在您有理由相信不需要重複信息時才應使用&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1778"/>
<source>Send this message in next Tx interval
Double-click to toggle between RRR and RR73 messages in Tx4 (not allowed for type 2 compound call holders)
RR73 messages should only be used when you are reasonably confident that no message repetitions will be required</source>
<translation>在下一個發射間隔內傳送此信息
按兩下可在 發射4 中的 RRR 和 RR73 信息之間切換 (不允許類型 2 複合呼叫持有者)
RR73 信息僅在您有理由相信不需要重複信息時才應使用</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1789"/>
<source>Ctrl+4</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1796"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Switch to this Tx message NOW&lt;/p&gt;&lt;p&gt;Double-click to toggle between RRR and RR73 messages in Tx4 (not allowed for type2 compound call holders)&lt;/p&gt;&lt;p&gt;RR73 messages should only be used when you are reasonably confident that no message repetitions will be required&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;立即切換到此發射信息&lt;/p&gt;&lt;p&gt;按兩下可在 發射 4 中的 RRR 和 RR73 信息之間切換 (不允許類型 2 複合呼叫持有者)&lt;/p&gt;&lt;p&gt;RR73 信息僅在您有理由相信不需要重複信息時才應使用&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1799"/>
<source>Switch to this Tx message NOW
Double-click to toggle between RRR and RR73 messages in Tx4 (not allowed for type2 compound call holders)
RR73 messages should only be used when you are reasonably confident that no message repetitions will be required</source>
<translation>立即切換到此發射信息
按兩下可在 發射 4 中的 RRR 和 RR73 信息之間切換 (不允許類型 2 複合呼叫持有者)
RR73 信息僅在您有理由相信不需要重複信息時才應使用</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1807"/>
<source>Tx &amp;4</source>
<translation>發射 &amp;4</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1810"/>
<source>Alt+4</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1817"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Switch to this Tx message NOW&lt;/p&gt;&lt;p&gt;Double-click to reset to the standard 73 message&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;立即切换到此发射信息&lt;/p&gt;&lt;p&gt;雙擊可重置為標準 73 信息&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1820"/>
<source>Switch to this Tx message NOW
Double-click to reset to the standard 73 message</source>
<translation>立即切换到此发射信息
雙擊可重置為標準 73 信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1827"/>
<source>Tx &amp;5</source>
<translation>發射 &amp;5</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1830"/>
<source>Alt+5</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1843"/>
<source>Now</source>
<translation>現在</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1853"/>
<source>Generate standard messages for minimal QSO</source>
<translation>產生標準信息用於通聯</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1856"/>
<source>Generate Std Msgs</source>
<translation>產生標準信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1869"/>
<source>Tx &amp;6</source>
<translation>發射 &amp;6</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1872"/>
<source>Alt+6</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1879"/>
<location filename="../widgets/mainwindow.ui" line="2155"/>
<source>Enter a free text message (maximum 13 characters)
or select a predefined macro from the dropdown list.
Press ENTER to add the current text to the predefined
list. The list can be maintained in Settings (F2).</source>
<translation>輸入自訂義文字資訊(最多13個字元)
或從下拉清單中選擇預定義的巨集.
按回車鍵將目前的文字加入預先定義的
清單. 該清單可在設定(F2)中維護.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1909"/>
<source>Queue up the next Tx message</source>
<translation>排到下一個發射信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1912"/>
<source>Next</source>
<translation>下一個</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1925"/>
<source>2</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1966"/>
<source>Calling CQ </source>
<translation>呼叫 CQ </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1982"/>
<source>Generate a CQ message</source>
<translation>產生CQ信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1985"/>
<location filename="../widgets/mainwindow.ui" line="2226"/>
<location filename="../widgets/mainwindow.ui" line="2230"/>
<source>CQ</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="1998"/>
<source>Generate message with RRR</source>
<translation>產生RRR信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2001"/>
<source>RRR</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2014"/>
<source>Generate message with report</source>
<translation>產生報告信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2017"/>
<source>dB</source>
<translation>分貝</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2042"/>
<source>Answering CQ</source>
<translation>回答 CQ</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2058"/>
<source>Generate message for replying to a CQ</source>
<translation>產生信息以回答 CQ</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2061"/>
<location filename="../widgets/mainwindow.ui" line="2421"/>
<source>Grid</source>
<translation>網格</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2074"/>
<source>Generate message with R+report</source>
<translation>產生 R+ 報告信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2077"/>
<source>R+dB</source>
<translation>R+分貝</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2090"/>
<source>Generate message with 73</source>
<translation>產生73信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2093"/>
<source>73</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2126"/>
<source>Send this standard (generated) message</source>
<translation>發送此標准(產生)信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2129"/>
<source>Gen msg</source>
<translation>產生信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2177"/>
<source>Send this free-text message (max 13 characters)</source>
<translation>發送此自定義文本信息(最多13個字符)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2180"/>
<source>Free msg</source>
<translation>自定義文本</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2190"/>
<source>3</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2210"/>
<source>Max dB </source>
<translation>最大分貝 </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2235"/>
<source>CQ AF</source>
<translation>CQ 非洲</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2240"/>
<source>CQ AN</source>
<translation>CQ 南極</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2245"/>
<source>CQ AS</source>
<translation>CQ 亞洲</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2250"/>
<source>CQ EU</source>
<translation>CQ 歐洲</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2255"/>
<source>CQ NA</source>
<translation>CQ 北美</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2260"/>
<source>CQ OC</source>
<translation>CQ 大洋洲</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2265"/>
<source>CQ SA</source>
<translation>CQ 南美</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2270"/>
<source>CQ 0</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2275"/>
<source>CQ 1</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2280"/>
<source>CQ 2</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2285"/>
<source>CQ 3</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2290"/>
<source>CQ 4</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2295"/>
<source>CQ 5</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2300"/>
<source>CQ 6</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2305"/>
<source>CQ 7</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2310"/>
<source>CQ 8</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2315"/>
<source>CQ 9</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2323"/>
<source>Reset</source>
<translation>重置</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2342"/>
<source>N List </source>
<translation>N 清單 </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2373"/>
<source>N Slots </source>
<translation>N 插槽 </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2404"/>
<location filename="../widgets/mainwindow.ui" line="2411"/>
<source>Random</source>
<translation>隨機</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2416"/>
<source>Call</source>
<translation>呼號</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2426"/>
<source>S/N (dB)</source>
<translation>信噪比(分貝)</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2431"/>
<source>Distance</source>
<translation>距離</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2452"/>
<source>More CQs</source>
<translation>更多 CQ</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2577"/>
<source>Percentage of 2-minute sequences devoted to transmitting.</source>
<translation>用於傳輸的2分鐘序列的百分比.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2583"/>
<source> %</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2586"/>
<source>Tx Pct </source>
<translation>發射 Pct </translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2596"/>
<source>Band Hopping</source>
<translation>波段預案</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2605"/>
<source>Choose bands and times of day for band-hopping.</source>
<translation>選擇波段和一天之中的時間進行波段跳躍.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2608"/>
<source>Schedule ...</source>
<translation>時間流程 ...</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2626"/>
<source>Upload decoded messages to WSPRnet.org.</source>
<translation>將解碼的信息上載到 WSPRnet.org.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2629"/>
<source>Upload spots</source>
<translation>上傳 spots</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2638"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;6 digit locators cause 2 different messages to be sent, the second contains the full locator but only a hashed callsign, other stations must have decoded the first once before they can decode your call in the second. Check this option to only send 4 digit locators if it will avoid the two message protocol.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;6 位定位器會導致發送 2 個不同的信息, 第二個包含完整定位器, 但只有哈希呼號,其他電臺必須解碼第一個一次, 然後才能在第二個中解碼您的呼叫. 如果此選項將避免兩個信息協定, 則選中此選項僅發送 4 位定位器.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2641"/>
<source>6 digit locators cause 2 different messages to be sent, the second contains the full locator but only a hashed callsign, other stations must have decoded the first once before they can decode your call in the second. Check this option to only send 4 digit locators if it will avoid the two message protocol.</source>
<translation>6 位定位器會導致發送 2 個不同的信息, 第二個包含完整定位器, 但只有哈希呼號,其他電臺必須解碼第一個一次, 然後才能在第二個中解碼您的呼叫. 如果此選項將避免兩個信息協定, 則選中此選項僅發送 4 位定位器.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2644"/>
<source>Prefer type 1 messages</source>
<translation>首選類型 1信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2654"/>
<source>No own call decodes</source>
<translation>沒有自己的呼號解碼</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2663"/>
<source>Transmit during the next 2-minute sequence.</source>
<translation>在接下來的2分鐘序列中輸送.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2677"/>
<source>Tx Next</source>
<translation>發射下一個信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2704"/>
<source>Set Tx power in dBm (dB above 1 mW) as part of your WSPR message.</source>
<translation>將發射功率設置為 dBm dB 高於 1 mW 作為 WSPR 信息的一部分.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2767"/>
<source>File</source>
<translation>檔案</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2788"/>
<source>View</source>
<translation>顯示</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2802"/>
<source>Decode</source>
<translation>解碼</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2816"/>
<source>Save</source>
<translation>儲存</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2824"/>
<source>Help</source>
<translation>說明</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2843"/>
<source>Mode</source>
<translation>模式</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2865"/>
<source>Configurations</source>
<translation>設定</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2870"/>
<source>Tools</source>
<translation>工具</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2893"/>
<source>Exit</source>
<translation>關閉軟件</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2904"/>
<source>Configuration</source>
<translation>設定檔</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2907"/>
<source>F2</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2912"/>
<source>About WSJT-X</source>
<translation>有關 WSJT-X</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2920"/>
<source>Waterfall</source>
<translation>瀑布圖</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2925"/>
<source>Open</source>
<translation>開啟檔案</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2928"/>
<source>Ctrl+O</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2933"/>
<source>Open next in directory</source>
<translation>開啟下一個檔案</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2938"/>
<source>Decode remaining files in directory</source>
<translation>開啟剩餘檔案</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2941"/>
<source>Shift+F6</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2946"/>
<source>Delete all *.wav &amp;&amp; *.c2 files in SaveDir</source>
<translation>刪除所有在SaveDir目錄內 *.wav &amp;&amp; *.c2</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2968"/>
<source>None</source>
<translation>不儲存</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2976"/>
<source>Save all</source>
<translation>儲存所有</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2981"/>
<source>Online User Guide</source>
<translation>線上使用者指南</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2986"/>
<source>Keyboard shortcuts</source>
<translation>鍵盤快捷鍵</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="2991"/>
<source>Special mouse commands</source>
<translation>滑鼠特殊組合</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3002"/>
<source>JT9</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3013"/>
<source>Save decoded</source>
<translation>儲存解碼</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3024"/>
<source>Normal</source>
<translation>正常</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3035"/>
<source>Deep</source>
<translation>深度</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3043"/>
<source>Monitor OFF at startup</source>
<translation>啟動時關閉監聽</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3048"/>
<source>Erase ALL.TXT</source>
<translation>刪除 ALL.TXT</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3053"/>
<source>Erase wsjtx_log.adi</source>
<translation>刪除通聯日誌 wsjtx_log.adi</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3061"/>
<source>Convert mode to RTTY for logging</source>
<translation>將日誌記錄模式轉換為RTTY</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3069"/>
<source>Log dB reports to Comments</source>
<translation>將分貝報告記錄到注釋</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3077"/>
<source>Prompt me to log QSO</source>
<translation>提示我記錄通聯</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3085"/>
<source>Blank line between decoding periods</source>
<translation>解碼期間之間添加空白行</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3093"/>
<source>Clear DX Call and Grid after logging</source>
<translation>日誌記錄後清除 DX 呼號和網格</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3101"/>
<source>Display distance in miles</source>
<translation>顯示距離以英里為單位</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3109"/>
<source>Double-click on call sets Tx Enable</source>
<translation>雙擊呼號啟用發射</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3112"/>
<location filename="../widgets/mainwindow.ui" line="3231"/>
<source>F7</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3120"/>
<source>Tx disabled after sending 73</source>
<translation>發送 73 後停止發射</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3128"/>
<location filename="../widgets/mainwindow.cpp" line="8103"/>
<source>Runaway Tx watchdog</source>
<translation>運行發射監管計時器</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3136"/>
<source>Allow multiple instances</source>
<translation>允許多個情況</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3144"/>
<source>Tx freq locked to Rx freq</source>
<translation>發射頻率鎖定到接收頻率</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3152"/>
<source>JT65</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3160"/>
<source>JT9+JT65</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3168"/>
<source>Tx messages to Rx Frequency window</source>
<translation>發射信息發送到接收信息窗口</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3176"/>
<source>Gray1</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3184"/>
<source>Show DXCC entity and worked B4 status</source>
<translation>顯示 DXCC 實體和曾經通聯狀態</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3192"/>
<source>Astronomical data</source>
<translation>天文數據</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3197"/>
<source>List of Type 1 prefixes and suffixes</source>
<translation>型態 1 前置碼與後綴清單</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3202"/>
<source>Settings...</source>
<translation>設置...</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3210"/>
<source>Local User Guide</source>
<translation>本地使用者指南</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3215"/>
<source>Open log directory</source>
<translation>開啟日誌檔案目錄</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3223"/>
<source>JT4</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3228"/>
<source>Message averaging</source>
<translation>信息平均值</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3239"/>
<source>Enable averaging</source>
<translation>平均值</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3247"/>
<source>Enable deep search</source>
<translation>開啟深度搜尋</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3255"/>
<source>WSPR</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3260"/>
<source>Echo Graph</source>
<translation>回波圖</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3263"/>
<source>F8</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3271"/>
<source>Echo</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3274"/>
<source>EME Echo mode</source>
<translation>EME 回波模式</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3282"/>
<source>ISCAT</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3287"/>
<source>Fast Graph</source>
<translation>快速圖</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3290"/>
<source>F9</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3295"/>
<source>&amp;Download Samples ...</source>
<translation>下載樣本(&amp;D) ...</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3298"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Download sample audio files demonstrating the various modes.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;下載演示各種模式的示例音頻檔案.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3306"/>
<source>MSK144</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3314"/>
<source>QRA64</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3319"/>
<source>Release Notes</source>
<translation>發行說明</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3327"/>
<source>Enable AP for DX Call</source>
<translation>開啟 AP 為 DX 呼叫</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3335"/>
<source>FreqCal</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3340"/>
<source>Measure reference spectrum</source>
<translation>測量參考頻譜</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3345"/>
<source>Measure phase response</source>
<translation>測量相位回應</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3350"/>
<source>Erase reference spectrum</source>
<translation>清除參考頻譜</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3358"/>
<source>Execute frequency calibration cycle</source>
<translation>執行頻率校準週期</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3363"/>
<source>Equalization tools ...</source>
<translation>均衡工具 ...</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3374"/>
<source>WSPR-LF</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3377"/>
<source>Experimental LF/MF mode</source>
<translation>實驗性 LF/MF 模式</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3391"/>
<source>FT8</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3399"/>
<location filename="../widgets/mainwindow.ui" line="3407"/>
<source>Enable AP</source>
<translation>開啟 AP</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3412"/>
<source>Solve for calibration parameters</source>
<translation>修正參數的解算</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3417"/>
<source>Copyright notice</source>
<translation>版權聲明</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3420"/>
<source>Shift+F1</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3428"/>
<source>Fox log</source>
<translation>狐狸日誌</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3433"/>
<source>FT8 DXpedition Mode User Guide</source>
<translation>FT8 遠征模式使用者指南</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3438"/>
<source>Reset Cabrillo log ...</source>
<translation>重置卡布里略日誌 ...</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3443"/>
<source>Color highlighting scheme</source>
<translation>色彩突顯機制</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3448"/>
<source>Contest Log</source>
<translation>競賽日誌</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3453"/>
<source>Export Cabrillo log ...</source>
<translation>匯出卡布里略日誌 ...</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3458"/>
<source>Quick-Start Guide to WSJT-X 2.0</source>
<translation>WSJT-X 2.0 快速入門指南</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3463"/>
<source>Contest log</source>
<translation>競賽日誌</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3468"/>
<source>Erase WSPR hashtable</source>
<translation>擦除 WSPR 哈希表</translation>
</message>
<message>
<location filename="../widgets/mainwindow.ui" line="3476"/>
<source>FT4</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="242"/>
<source>Rig Control Error</source>
<translation>無線電設備控制錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="329"/>
<location filename="../widgets/mainwindow.cpp" line="4113"/>
<location filename="../widgets/mainwindow.cpp" line="7631"/>
<source>Receiving</source>
<translation>接收</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="437"/>
<source>Do you want to reconfigure the radio interface?</source>
<translation>是否要重新配置無線電設備接口?</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="497"/>
<source>Error Scanning ADIF Log</source>
<translation>掃描 ADIF 紀錄錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="501"/>
<source>Scanned ADIF log, %1 worked before records created</source>
<translation>掃描 ADIF 紀錄紀錄, %1 建立曾經通聯紀錄</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="619"/>
<source>Error Loading LotW Users Data</source>
<translation>載入 LotW 使用者資料錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="706"/>
<source>Error Writing WAV File</source>
<translation>寫入 WAV 檔案時錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="749"/>
<source>Configurations...</source>
<translation>設定檔案...</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="823"/>
<location filename="../widgets/mainwindow.cpp" line="5789"/>
<location filename="../widgets/mainwindow.cpp" line="5795"/>
<location filename="../widgets/mainwindow.cpp" line="5833"/>
<location filename="../widgets/mainwindow.cpp" line="5843"/>
<location filename="../widgets/mainwindow.cpp" line="5940"/>
<location filename="../widgets/mainwindow.cpp" line="5941"/>
<location filename="../widgets/mainwindow.cpp" line="5989"/>
<location filename="../widgets/mainwindow.cpp" line="5990"/>
<location filename="../widgets/mainwindow.cpp" line="5994"/>
<location filename="../widgets/mainwindow.cpp" line="5995"/>
<location filename="../widgets/mainwindow.cpp" line="6042"/>
<location filename="../widgets/mainwindow.cpp" line="6043"/>
<location filename="../widgets/mainwindow.cpp" line="6208"/>
<location filename="../widgets/mainwindow.cpp" line="6209"/>
<location filename="../widgets/mainwindow.cpp" line="6394"/>
<source>Message</source>
<translation>信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="837"/>
<source>Error Killing jt9.exe Process</source>
<translation>錯誤終止 jt9.exe 程序</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="838"/>
<source>KillByName return code: %1</source>
<translation>按結束名稱返回代碼: %1</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="853"/>
<source>Error removing &quot;%1&quot;</source>
<translation>刪除時出錯誤 &quot;%1&quot;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="854"/>
<source>Click OK to retry</source>
<translation>單擊 確定 重試</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="1254"/>
<location filename="../widgets/mainwindow.cpp" line="6183"/>
<source>Improper mode</source>
<translation>模式不正確</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="1405"/>
<location filename="../widgets/mainwindow.cpp" line="8730"/>
<source>File Open Error</source>
<translation>檔案開啟出錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="1406"/>
<location filename="../widgets/mainwindow.cpp" line="7748"/>
<location filename="../widgets/mainwindow.cpp" line="8177"/>
<location filename="../widgets/mainwindow.cpp" line="8731"/>
<location filename="../widgets/mainwindow.cpp" line="8857"/>
<source>Cannot open &quot;%1&quot; for append: %2</source>
<translation>無法開啟 &quot;%1&quot; 用於附加: %2</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="1504"/>
<source>Error saving c2 file</source>
<translation>保存c2檔案出錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="1716"/>
<source>Error in Sound Input</source>
<translation>聲音輸入出錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="1722"/>
<source>Error in Sound Output</source>
<translation>聲音輸出錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="1778"/>
<location filename="../widgets/mainwindow.cpp" line="5938"/>
<location filename="../widgets/mainwindow.cpp" line="6084"/>
<source>Single-Period Decodes</source>
<translation>單週期解碼</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="1779"/>
<location filename="../widgets/mainwindow.cpp" line="5939"/>
<location filename="../widgets/mainwindow.cpp" line="6085"/>
<source>Average Decodes</source>
<translation>平均解碼</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2080"/>
<source>Change Operator</source>
<translation>變更操作員</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2080"/>
<source>New operator:</source>
<translation>新操作員:</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2190"/>
<source>Status File Error</source>
<translation>狀態檔案錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2191"/>
<location filename="../widgets/mainwindow.cpp" line="5402"/>
<source>Cannot open &quot;%1&quot; for writing: %2</source>
<translation>無法開啟 &quot;%1&quot; 用於寫入: %2</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2322"/>
<source>Subprocess Error</source>
<translation>子流程出錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2323"/>
<source>Subprocess failed with exit code %1</source>
<translation>子流程失敗, 退出代碼為 %1</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2325"/>
<location filename="../widgets/mainwindow.cpp" line="2345"/>
<source>Running: %1
%2</source>
<translation>運行: %1
%2</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2344"/>
<source>Subprocess error</source>
<translation>子進程出錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2382"/>
<source>Reference spectrum saved</source>
<translation>儲存參考頻譜</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2445"/>
<source>Invalid data in fmt.all at line %1</source>
<translation>在 %1 行中 fmt.all 的不合法資料</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2451"/>
<source>Good Calibration Solution</source>
<translation>良好的校準解決方案</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2452"/>
<source>&lt;pre&gt;%1%L2 ±%L3 ppm
%4%L5 ±%L6 Hz
%7%L8
%9%L10 Hz&lt;/pre&gt;</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2466"/>
<source>Delete Calibration Measurements</source>
<translation>刪除校準測量值</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2467"/>
<source>The &quot;fmt.all&quot; file will be renamed as &quot;fmt.bak&quot;</source>
<translation>&quot;fmt.all&quot; 檔案將重新命名為 &quot;fmt.bak&quot;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2750"/>
<source>No data read from disk. Wrong file format?</source>
<translation>沒有從磁盤讀取數據. 檔案格式出錯誤?</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2757"/>
<source>Confirm Delete</source>
<translation>確認刪除</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2758"/>
<source>Are you sure you want to delete all *.wav and *.c2 files in &quot;%1&quot;?</source>
<translation>是否確實要刪除所有 *.wav 和 *.c2 檔案在 &quot;%1&quot;?</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2795"/>
<source>Keyboard Shortcuts</source>
<translation>鍵盤快捷鍵</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2808"/>
<source>Special Mouse Commands</source>
<translation>滑鼠特殊組合</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="3118"/>
<source>No more files to open.</source>
<translation>沒有要打開的檔.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="3606"/>
<source>Please choose another Tx frequency. WSJT-X will not knowingly transmit another mode in the WSPR sub-band on 30m.</source>
<translation>請選擇其他發射頻率. WSJT-X 不會故意傳輸另一個模式在 WSPR 30米子波段上.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="3610"/>
<source>WSPR Guard Band</source>
<translation>WSPR保護波段</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="3623"/>
<source>Please choose another dial frequency. WSJT-X will not operate in Fox mode in the standard FT8 sub-bands.</source>
<translation>請選擇其他頻率. WSJT-X 不會運行狐狸模式在標準 FT8 波段.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="3627"/>
<source>Fox Mode warning</source>
<translation>狐狸模式警告</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="2479"/>
<source>If you make fair use of any part of WSJT-X under terms of the GNU General Public License, you must display the following copyright notice prominently in your derivative work:
&quot;The algorithms, source code, look-and-feel of WSJT-X and related programs, and protocol specifications for the modes FSK441, FT8, JT4, JT6M, JT9, JT65, JTMS, QRA64, ISCAT, MSK144 are Copyright (C) 2001-2020 by one or more of the following authors: Joseph Taylor, K1JT; Bill Somerville, G4WJS; Steven Franke, K9AN; Nico Palermo, IV3NWV; Greg Beam, KI7MT; Michael Black, W9MDB; Edson Pereira, PY2SDR; Philip Karn, KA9Q; and other members of the WSJT Development Group.&quot;</source>
<translation>如果您根據 GNU 通用公共授權條款合理使用 WSJT-X 的任何部分, 則必須在衍生作品中醒目地顯示以下版權聲明:
&quot;WSJT-X 的演演演算法, 原始碼, 外觀和感覺及相關程式, 和協定規格模式 FSK441, FT8, JT4, JT6M, JT9, JT65, JTMS, QRA64, ISCAT, MSK144 的版權 (C) 2001-2019 由以下一個或多個作者: Joseph Taylor, K1JT; Bill Somerville, G4WJS; Steven Franke, K9AN; Nico Palermo, IV3NWV; Greg Beam, KI7MT; Michael Black, W9MDB; Edson Pereira, PY2SDR; Philip Karn, KA9Q; 和 WSJT 開發組的其他成員.&quot;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="4217"/>
<source>Last Tx: %1</source>
<translation>最後發射: %1</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="4618"/>
<source>Should you switch to EU VHF Contest mode?
To do so, check &apos;Special operating activity&apos; and
&apos;EU VHF Contest&apos; on the Settings | Advanced tab.</source>
<translation>是否應切換到 歐洲 VHF 競賽模式?
為此, 請檢查 &apos;特殊操作活動&apos;
設置高級選項卡上的 &apos;歐洲 VHF 競賽&apos;.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="4637"/>
<source>Should you switch to ARRL Field Day mode?</source>
<translation>是否應切換到 ARRL Field Day 模式?</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="4642"/>
<source>Should you switch to RTTY contest mode?</source>
<translation>是否應切換到 RTTY 競賽模式?</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="5369"/>
<location filename="../widgets/mainwindow.cpp" line="5388"/>
<location filename="../widgets/mainwindow.cpp" line="5401"/>
<location filename="../widgets/mainwindow.cpp" line="5427"/>
<source>Add to CALL3.TXT</source>
<translation>添加到 CALL3.TXT</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="5370"/>
<source>Please enter a valid grid locator</source>
<translation>請輸入有效的網格定位</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="5389"/>
<source>Cannot open &quot;%1&quot; for read/write: %2</source>
<translation>無法開啟 &quot;%1&quot; 用於讀/寫: %2</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="5425"/>
<source>%1
is already in CALL3.TXT, do you wish to replace it?</source>
<translation>%1
已經在 CALL3.TXT, 你想替換它嗎?</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="5601"/>
<source>Warning: DX Call field is empty.</source>
<translation>警告: DX 呼號欄位為空.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="5658"/>
<source>Log file error</source>
<translation>日誌檔案錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="5659"/>
<source>Cannot open &quot;%1&quot;</source>
<translation>無法開啟 &quot;%1&quot;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="5675"/>
<source>Error sending log to N1MM</source>
<translation>將日誌傳送到 N1MM 時發生錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="5676"/>
<source>Write returned &quot;%1&quot;</source>
<translation>寫入返回 &quot;%1&quot;</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="5839"/>
<source>Stations calling DXpedition %1</source>
<translation>呼叫遠征電臺 %1</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="5874"/>
<source>Hound</source>
<translation>獵犬</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="6214"/>
<source>Tx Messages</source>
<translation>發射信息</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="6465"/>
<location filename="../widgets/mainwindow.cpp" line="6498"/>
<location filename="../widgets/mainwindow.cpp" line="6508"/>
<source>Confirm Erase</source>
<translation>確認擦除</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="6466"/>
<source>Are you sure you want to erase file ALL.TXT?</source>
<translation>是否確實要擦除 ALL.Txt 檔案?</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="6476"/>
<location filename="../widgets/mainwindow.cpp" line="8222"/>
<source>Confirm Reset</source>
<translation>確認重置</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="6477"/>
<source>Are you sure you want to erase your contest log?</source>
<translation>是否確實要擦除競賽日誌?</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="6478"/>
<source>Doing this will remove all QSO records for the current contest. They will be kept in the ADIF log file but will not be available for export in your Cabrillo log.</source>
<translation>執行此動作將移除目前競賽的所有通聯記錄. 它們將保留在 ADIF 日誌檔案中, 但無法匯出到您的卡布里略日誌中.</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="6491"/>
<source>Cabrillo Log saved</source>
<translation>卡布里略日誌已儲存</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="6499"/>
<source>Are you sure you want to erase file wsjtx_log.adi?</source>
<translation>是否確實要擦除 wsjtx_log.adi 檔案?</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="6509"/>
<source>Are you sure you want to erase the WSPR hashtable?</source>
<translation>是否確定要擦除 WSPR 哈希表?</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="6603"/>
<source>VHF features warning</source>
<translation>VHF 功能警告</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="7208"/>
<source>Tune digital gain </source>
<translation>調諧數碼增益 </translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="7210"/>
<source>Transmit digital gain </source>
<translation>傳輸數碼增益 </translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="7229"/>
<source>Prefixes</source>
<translation>前綴</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="7598"/>
<source>Network Error</source>
<translation>網路錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="7599"/>
<source>Error: %1
UDP server %2:%3</source>
<translation>錯誤: %1
UDP 服務器 %2:%3</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="7747"/>
<source>File Error</source>
<translation>檔案錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="7981"/>
<source>Phase Training Disabled</source>
<translation>關閉階段訓練</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="7984"/>
<source>Phase Training Enabled</source>
<translation>開啟階段訓練</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="8118"/>
<source>WD:%1m</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="8180"/>
<location filename="../widgets/mainwindow.cpp" line="8860"/>
<source>Log File Error</source>
<translation>日誌檔案錯誤</translation>
</message>
<message>
<location filename="../widgets/mainwindow.cpp" line="8223"/>
<source>Are you sure you want to clear the QSO queues?</source>
<translation>是否要清除通聯佇列?</translation>
</message>
</context>
<context>
<name>MessageAveraging</name>
<message>
<location filename="../widgets/messageaveraging.ui" line="14"/>
<location filename="../widgets/messageaveraging.cpp" line="19"/>
<source>Message Averaging</source>
<translation>信息平均值</translation>
</message>
<message>
<location filename="../widgets/messageaveraging.ui" line="29"/>
<source> UTC Sync DT Freq </source>
<translation></translation>
</message>
</context>
<context>
<name>Modes</name>
<message>
<location filename="../models/Modes.cpp" line="65"/>
<location filename="../models/Modes.cpp" line="92"/>
<source>Mode</source>
<translation>模式</translation>
</message>
</context>
<context>
<name>MultiSettings</name>
<message>
<location filename="../MultiSettings.cpp" line="39"/>
<source>Default</source>
<translation>默認值</translation>
</message>
</context>
<context>
<name>MultiSettings::impl</name>
<message>
<location filename="../MultiSettings.cpp" line="489"/>
<source>&amp;Switch To</source>
<translation>切換到(&amp;S)</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="497"/>
<source>&amp;Clone</source>
<translation>克隆(&amp;C)</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="508"/>
<source>Clone &amp;Into ...</source>
<translation>克隆到(&amp;I) ...</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="515"/>
<source>R&amp;eset</source>
<translation>重置(&amp;e)</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="521"/>
<source>&amp;Rename ...</source>
<translation>重新命名(&amp;R) ...</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="529"/>
<source>&amp;Delete</source>
<translation>刪除(&amp;D)</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="664"/>
<source>Clone Into Configuration</source>
<translation>克隆到設定</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="665"/>
<source>Confirm overwrite of all values for configuration &quot;%1&quot; with values from &quot;%2&quot;?</source>
<translation>確認覆蓋設定 &quot;%1&quot; 的值, 以及來自 &quot;%2&quot;的值?</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="710"/>
<source>Reset Configuration</source>
<translation>重置設定</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="711"/>
<source>Confirm reset to default values for configuration &quot;%1&quot;?</source>
<translation>確認重置為設定的預設值 &quot;%1&quot;?</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="797"/>
<source>Delete Configuration</source>
<translation>刪除設定</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="798"/>
<source>Confirm deletion of configuration &quot;%1&quot;?</source>
<translation>確認刪除設定 &quot;%1&quot;?</translation>
</message>
</context>
<context>
<name>NameDialog</name>
<message>
<location filename="../MultiSettings.cpp" line="76"/>
<source>New Configuration Name</source>
<translation>新設定名稱</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="79"/>
<source>Old name:</source>
<translation>舊名稱:</translation>
</message>
<message>
<location filename="../MultiSettings.cpp" line="81"/>
<source>&amp;New name:</source>
<translation>新名稱(&amp;N):</translation>
</message>
</context>
<context>
<name>OmniRigTransceiver</name>
<message>
<location filename="../Transceiver/OmniRigTransceiver.cpp" line="53"/>
<source>OmniRig: unrecognized mode</source>
<translation>OmniRig: 無法識別的模式</translation>
</message>
<message>
<location filename="../Transceiver/OmniRigTransceiver.cpp" line="137"/>
<source>Failed to start OmniRig COM server</source>
<translation>無法啟動 OmniRig COM 伺服器</translation>
</message>
<message>
<location filename="../Transceiver/OmniRigTransceiver.cpp" line="260"/>
<location filename="../Transceiver/OmniRigTransceiver.cpp" line="733"/>
<source>OmniRig: don&apos;t know how to set rig frequency</source>
<translation>OmniRig:不知道如何設置無線電設備頻率</translation>
</message>
<message>
<location filename="../Transceiver/OmniRigTransceiver.cpp" line="265"/>
<location filename="../Transceiver/OmniRigTransceiver.cpp" line="293"/>
<source>OmniRig: timeout waiting for update from rig</source>
<translation>OmniRig:等待從無線電設備更新的超時</translation>
</message>
<message>
<location filename="../Transceiver/OmniRigTransceiver.cpp" line="350"/>
<source>OmniRig COM/OLE error: %1 at %2: %3 (%4)</source>
<translation>OmniRig COM/OLE 錯誤: %1 at %2: %3 (%4)</translation>
</message>
</context>
<context>
<name>PollingTransceiver</name>
<message>
<location filename="../Transceiver/PollingTransceiver.cpp" line="179"/>
<source>Unexpected rig error</source>
<translation>無線電設備意外出錯誤</translation>
</message>
</context>
<context>
<name>QObject</name>
<message>
<location filename="../main.cpp" line="340"/>
<source>Invalid rig name - \ &amp; / not allowed</source>
<translation>無效的無線電裝置名稱 - \ &amp; / 不允許</translation>
</message>
<message>
<location filename="../widgets/widegraph.cpp" line="18"/>
<source>User Defined</source>
<translation>用戶定義</translation>
</message>
<message>
<location filename="../Network/LotWUsers.cpp" line="227"/>
<source>Failed to open LotW users CSV file: &apos;%1&apos;</source>
<translation>無法開啟 LotW 使用者 CSV 檔案: &apos;%1&apos;</translation>
</message>
<message>
<location filename="../models/Bands.cpp" line="50"/>
<source>OOB</source>
<translation></translation>
</message>
<message>
<location filename="../WFPalette.cpp" line="55"/>
<source>Too many colours in palette.</source>
<translation>調色板中顏色太多.</translation>
</message>
<message>
<location filename="../WFPalette.cpp" line="78"/>
<source>Error reading waterfall palette file &quot;%1:%2&quot; too many colors.</source>
<translation>讀取瀑布調色板檔案時出錯誤 &quot;%1:%2&quot; 太多顏色.</translation>
</message>
<message>
<location filename="../WFPalette.cpp" line="84"/>
<source>Error reading waterfall palette file &quot;%1:%2&quot; invalid triplet.</source>
<translation>讀取瀑布調色板檔案時出錯誤 &quot;%1:%2&quot; 無效的三元組.</translation>
</message>
<message>
<location filename="../WFPalette.cpp" line="96"/>
<source>Error reading waterfall palette file &quot;%1:%2&quot; invalid color.</source>
<translation>讀取瀑布調色板檔案時出錯誤 &quot;%1:%2&quot; 無效的顏色.</translation>
</message>
<message>
<location filename="../WFPalette.cpp" line="104"/>
<source>Error opening waterfall palette file &quot;%1&quot;: %2.</source>
<translation>讀取瀑布調色板檔案時出錯誤 &quot;%1&quot;: %2.</translation>
</message>
<message>
<location filename="../WFPalette.cpp" line="250"/>
<source>Error writing waterfall palette file &quot;%1&quot;: %2.</source>
<translation>讀取瀑布調色板檔案時出錯誤 &quot;%1&quot;: %2.</translation>
</message>
</context>
<context>
<name>RemoteFile</name>
<message>
<location filename="../SampleDownloader/RemoteFile.cpp" line="39"/>
<location filename="../SampleDownloader/RemoteFile.cpp" line="110"/>
<location filename="../SampleDownloader/RemoteFile.cpp" line="231"/>
<location filename="../SampleDownloader/RemoteFile.cpp" line="281"/>
<location filename="../SampleDownloader/RemoteFile.cpp" line="294"/>
<location filename="../SampleDownloader/RemoteFile.cpp" line="305"/>
<source>File System Error</source>
<translation>檔案系統出錯誤</translation>
</message>
<message>
<location filename="../SampleDownloader/RemoteFile.cpp" line="40"/>
<source>Cannot rename file:
&quot;%1&quot;
to: &quot;%2&quot;
Error(%3): %4</source>
<translation>無法重命名檔案:
&quot;%1&quot;
到: &quot;%2&quot;
出錯誤(%3): %4</translation>
</message>
<message>
<location filename="../SampleDownloader/RemoteFile.cpp" line="111"/>
<source>Cannot delete file:
&quot;%1&quot;</source>
<translation>無法刪除檔案:
&quot;%1&quot;</translation>
</message>
<message>
<location filename="../SampleDownloader/RemoteFile.cpp" line="190"/>
<location filename="../SampleDownloader/RemoteFile.cpp" line="202"/>
<location filename="../SampleDownloader/RemoteFile.cpp" line="221"/>
<source>Network Error</source>
<translation>網絡錯誤</translation>
</message>
<message>
<location filename="../SampleDownloader/RemoteFile.cpp" line="191"/>
<source>Too many redirects: %1</source>
<translation>太多重定向: %1</translation>
</message>
<message>
<location filename="../SampleDownloader/RemoteFile.cpp" line="203"/>
<source>Redirect not followed: %1</source>
<translation>未遵循重定向:%1</translation>
</message>
<message>
<location filename="../SampleDownloader/RemoteFile.cpp" line="232"/>
<source>Cannot commit changes to:
&quot;%1&quot;</source>
<translation>無法將更改提交給:
&quot;%1&quot;</translation>
</message>
<message>
<location filename="../SampleDownloader/RemoteFile.cpp" line="282"/>
<source>Cannot open file:
&quot;%1&quot;
Error(%2): %3</source>
<translation>無法開啟檔案:
&quot;%1&quot;
出錯誤(%2): %3</translation>
</message>
<message>
<location filename="../SampleDownloader/RemoteFile.cpp" line="295"/>
<source>Cannot make path:
&quot;%1&quot;</source>
<translation>無法建立路徑:
&quot;%1&quot;</translation>
</message>
<message>
<location filename="../SampleDownloader/RemoteFile.cpp" line="306"/>
<source>Cannot write to file:
&quot;%1&quot;
Error(%2): %3</source>
<translation>無法寫入檔案:
&quot;%1&quot;
出錯誤(%2): %3</translation>
</message>
</context>
<context>
<name>SampleDownloader::impl</name>
<message>
<location filename="../SampleDownloader.cpp" line="101"/>
<source>Download Samples</source>
<translation>下載樣本</translation>
</message>
<message>
<location filename="../SampleDownloader.cpp" line="104"/>
<source>&amp;Abort</source>
<translation>中止 (&amp;A)</translation>
</message>
<message>
<location filename="../SampleDownloader.cpp" line="105"/>
<source>&amp;Refresh</source>
<translation>刷新 (&amp;R)</translation>
</message>
<message>
<location filename="../SampleDownloader.cpp" line="108"/>
<source>&amp;Details</source>
<translation>詳情 (&amp;D)</translation>
</message>
<message>
<location filename="../SampleDownloader.cpp" line="112"/>
<source>Base URL for samples:</source>
<translation>樣本下載網址:</translation>
</message>
<message>
<location filename="../SampleDownloader.cpp" line="113"/>
<source>Only use HTTP:</source>
<translation>只使用 HTTP:</translation>
</message>
<message>
<location filename="../SampleDownloader.cpp" line="114"/>
<source>Check this is you get SSL/TLS errors</source>
<translation>選擇, 當你得到SSL/TLS錯誤</translation>
</message>
<message>
<location filename="../SampleDownloader.cpp" line="132"/>
<source>Input Error</source>
<translation>輸入錯誤</translation>
</message>
<message>
<location filename="../SampleDownloader.cpp" line="132"/>
<source>Invalid URL format</source>
<translation>不合法網址格式</translation>
</message>
</context>
<context>
<name>SoundInput</name>
<message>
<location filename="../Audio/soundin.cpp" line="21"/>
<source>An error opening the audio input device has occurred.</source>
<translation>開啟音頻輸入設備時出錯誤.</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="25"/>
<source>An error occurred during read from the audio input device.</source>
<translation>從音頻輸入設備讀取時出錯誤.</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="29"/>
<source>Audio data not being fed to the audio input device fast enough.</source>
<translation>音頻數據沒有足夠提供饋送到音頻輸入設備.</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="33"/>
<source>Non-recoverable error, audio input device not usable at this time.</source>
<translation>不可恢復的出錯誤, 音頻輸入設備此時不可用.</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="62"/>
<source>Requested input audio format is not valid.</source>
<translation>請求的輸入音頻格式無效.</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="69"/>
<source>Requested input audio format is not supported on device.</source>
<translation>設備不支持請求輸入的音頻格式.</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="90"/>
<source>Failed to initialize audio sink device</source>
<translation>無法初始化音頻接收器設備</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="125"/>
<source>Idle</source>
<translation>閑置</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="129"/>
<source>Receiving</source>
<translation>接收</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="133"/>
<source>Suspended</source>
<translation>暫停</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="138"/>
<source>Interrupted</source>
<translation>中斷</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="145"/>
<source>Error</source>
<translation>錯誤</translation>
</message>
<message>
<location filename="../Audio/soundin.cpp" line="149"/>
<source>Stopped</source>
<translation>停止</translation>
</message>
</context>
<context>
<name>SoundOutput</name>
<message>
<location filename="../Audio/soundout.cpp" line="30"/>
<source>An error opening the audio output device has occurred.</source>
<translation>開啟音頻輸出設備時錯誤.</translation>
</message>
<message>
<location filename="../Audio/soundout.cpp" line="34"/>
<source>An error occurred during write to the audio output device.</source>
<translation>寫入音頻輸出設備期間錯誤.</translation>
</message>
<message>
<location filename="../Audio/soundout.cpp" line="38"/>
<source>Audio data not being fed to the audio output device fast enough.</source>
<translation>音頻數據未以足夠快的速度饋送到音頻輸出設備.</translation>
</message>
<message>
<location filename="../Audio/soundout.cpp" line="42"/>
<source>Non-recoverable error, audio output device not usable at this time.</source>
<translation>不可恢復錯誤, 音頻輸出設備此時不可用.</translation>
</message>
<message>
<location filename="../Audio/soundout.cpp" line="69"/>
<source>Requested output audio format is not valid.</source>
<translation>請求的輸出音頻格式無效.</translation>
</message>
<message>
<location filename="../Audio/soundout.cpp" line="73"/>
<source>Requested output audio format is not supported on device.</source>
<translation>設備不支持請求輸出的音頻格式.</translation>
</message>
<message>
<location filename="../Audio/soundout.cpp" line="179"/>
<source>Idle</source>
<translation>閑置</translation>
</message>
<message>
<location filename="../Audio/soundout.cpp" line="183"/>
<source>Sending</source>
<translation>發送</translation>
</message>
<message>
<location filename="../Audio/soundout.cpp" line="187"/>
<source>Suspended</source>
<translation>暫停</translation>
</message>
<message>
<location filename="../Audio/soundout.cpp" line="192"/>
<source>Interrupted</source>
<translation>中斷</translation>
</message>
<message>
<location filename="../Audio/soundout.cpp" line="199"/>
<source>Error</source>
<translation>錯誤</translation>
</message>
<message>
<location filename="../Audio/soundout.cpp" line="203"/>
<source>Stopped</source>
<translation>停止</translation>
</message>
</context>
<context>
<name>StationDialog</name>
<message>
<location filename="../Configuration.cpp" line="309"/>
<source>Add Station</source>
<translation>添加電臺</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="314"/>
<source>&amp;Band:</source>
<translation>波段(&amp;B):</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="315"/>
<source>&amp;Offset (MHz):</source>
<translation>偏移 (M&amp;Hz):</translation>
</message>
<message>
<location filename="../Configuration.cpp" line="316"/>
<source>&amp;Antenna:</source>
<translation>天線(&amp;A):</translation>
</message>
</context>
<context>
<name>StationList::impl</name>
<message>
<location filename="../models/StationList.cpp" line="294"/>
<source>Band name</source>
<translation>波段名稱</translation>
</message>
<message>
<location filename="../models/StationList.cpp" line="320"/>
<source>Frequency offset</source>
<translation>頻率偏移</translation>
</message>
<message>
<location filename="../models/StationList.cpp" line="342"/>
<source>Antenna description</source>
<translation>天線描述</translation>
</message>
<message>
<location filename="../models/StationList.cpp" line="364"/>
<source>Band</source>
<translation>波段</translation>
</message>
<message>
<location filename="../models/StationList.cpp" line="365"/>
<source>Offset</source>
<translation>偏移</translation>
</message>
<message>
<location filename="../models/StationList.cpp" line="366"/>
<source>Antenna Description</source>
<translation>天線描述</translation>
</message>
</context>
<context>
<name>TransceiverBase</name>
<message>
<location filename="../Transceiver/TransceiverBase.cpp" line="14"/>
<source>Unexpected rig error</source>
<translation>無線電設備意外出錯誤</translation>
</message>
</context>
<context>
<name>WideGraph</name>
<message>
<location filename="../widgets/widegraph.ui" line="14"/>
<source>Dialog</source>
<translation>對話框</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="68"/>
<source>Controls</source>
<translation>控件列</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="124"/>
<source>Spectrum gain</source>
<translation>頻譜增益</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="145"/>
<source> Palette </source>
<translation> 調色板 </translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="155"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Enter definition for a new color palette.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;輸入新調色板的定義.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="158"/>
<source>Adjust...</source>
<translation>調整...</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="188"/>
<source>Waterfall gain</source>
<translation>瀑布增益</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="207"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Set fractional size of spectrum in this window.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;在此窗口中設置頻譜的大小.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="213"/>
<source> %</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="216"/>
<source>Spec </source>
<translation>佔高 </translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="234"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Flatten spectral baseline over the full displayed interval.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;在完整顯示的間隔內平展頻譜基線.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="237"/>
<source>Flatten</source>
<translation>平坦化</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="244"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Compute and save a reference spectrum. (Not yet fully implemented.)&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;計算並保存參考頻譜. (尚未完全實現.)&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="247"/>
<source>Ref Spec</source>
<translation>參考規格</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="259"/>
<source>Smoothing of Linear Average spectrum</source>
<translation>線性平均頻譜的平滑</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="268"/>
<source>Smooth </source>
<translation>平滑 </translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="281"/>
<source>Compression factor for frequency scale</source>
<translation>頻率刻度的壓縮系數</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="287"/>
<source>Bins/Pixel </source>
<translation>點/像素 </translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="306"/>
<source>Select waterfall palette</source>
<translation>選擇瀑布調色板</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="313"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Select data for spectral display&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇用於頻譜顯示的數據&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="320"/>
<source>Current</source>
<translation>當前</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="325"/>
<source>Cumulative</source>
<translation>累積</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="330"/>
<source>Linear Avg</source>
<translation>線性平均</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="335"/>
<source>Reference</source>
<translation>參考</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="343"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Frequency at left edge of waterfall&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;波段在瀑布左邊緣顯示&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="346"/>
<source> Hz</source>
<translation> 赫茲</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="349"/>
<source>Start </source>
<translation>開始 </translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="362"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Decode JT9 only above this frequency&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;僅在此頻率以上解碼 JT9&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="365"/>
<source> JT9</source>
<translation></translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="368"/>
<source>JT65 </source>
<translation></translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="387"/>
<source>Number of FFTs averaged (controls waterfall scrolling rate)</source>
<translation>FFT 平均數(控制瀑布滾動速率)</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="390"/>
<source>N Avg </source>
<translation>N 平均 </translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="421"/>
<source>Waterfall zero</source>
<translation>瀑布零度</translation>
</message>
<message>
<location filename="../widgets/widegraph.ui" line="458"/>
<source>Spectrum zero</source>
<translation>頻譜零度</translation>
</message>
<message>
<location filename="../widgets/widegraph.cpp" line="33"/>
<source>Wide Graph</source>
<translation>寬圖</translation>
</message>
<message>
<location filename="../widgets/widegraph.cpp" line="392"/>
<location filename="../widgets/widegraph.cpp" line="441"/>
<source>Read Palette</source>
<translation>讀取調色盤</translation>
</message>
</context>
<context>
<name>configuration_dialog</name>
<message>
<location filename="../Configuration.ui" line="14"/>
<source>Settings</source>
<translation>設置</translation>
</message>
<message>
<location filename="../Configuration.ui" line="24"/>
<source>Genera&amp;l</source>
<translation>一般(&amp;l)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="27"/>
<source>General station details and settings.</source>
<translation>設置電臺詳細信息.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="33"/>
<source>Station Details</source>
<translation>電臺資料</translation>
</message>
<message>
<location filename="../Configuration.ui" line="43"/>
<source>My C&amp;all:</source>
<translation>我的呼號(&amp;a):</translation>
</message>
<message>
<location filename="../Configuration.ui" line="53"/>
<source>Station callsign.</source>
<translation>電臺呼號.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="64"/>
<source>M&amp;y Grid:</source>
<translation>我的網格(&amp;y):</translation>
</message>
<message>
<location filename="../Configuration.ui" line="74"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Maidenhead locator, preferably 6 characters.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;梅登黑德定位器, 最好是 6 個字元.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="83"/>
<source>Check to allow grid changes from external programs</source>
<translation>選擇允許從外部程式變更格線</translation>
</message>
<message>
<location filename="../Configuration.ui" line="86"/>
<source>AutoGrid</source>
<translation>自動格線</translation>
</message>
<message>
<location filename="../Configuration.ui" line="95"/>
<source>IARU Region:</source>
<translation>IARU 區域:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="105"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Select your IARU region.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇您的 IARU 區域.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="118"/>
<source>Message generation for type 2 compound callsign holders:</source>
<translation>信息產生用於類型2複合呼號持有人:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="134"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Type 2 compound callsigns are those with prefixes or suffixes not included in the allowed shortlist (See Help-&amp;gt;Add-on prefixes and suffixes).&lt;/p&gt;&lt;p&gt;This option determines which generated messages should contain your full type 2 compound call sign rather than your base callsign. It only applies if you have a type 2 compound callsign.&lt;/p&gt;&lt;p&gt;This option controls the way the messages that are used to answer CQ calls are generated. Generated messages 6 (CQ) and 5 (73) will always contain your full callsign. The JT65 and JT9 protocols allow for some standard messages with your full call at the expense of another piece of information such as the DX call or your locator.&lt;/p&gt;&lt;p&gt;Choosing message 1 omits the DX callsign which may be an issue when replying to CQ calls. Choosing message 3 also omits the DX callsign and many versions of this and other software will not extract the report. Choosing neither means that your full callsign only goes in your message 5 (73) so your QSO partner may log the wrong callsign.&lt;/p&gt;&lt;p&gt;None of these options are perfect, message 3 is usually best but be aware your QSO partner may not log the report you send them.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;複合呼號類型2是那些前綴或後綴不包括在允許的決選名單中 (請參閱説明-&amp; gt; 載入項目前綴和後綴).&lt;p&gt;&lt;p&gt;這個選項確定哪些產生的資訊應包含完整類型2複合呼號, 而不是基本呼號.它僅適用於類型為2的複合呼號.&lt;/p&gt;&lt;p&gt;這個選項控制用於應答 CQ 呼叫的資訊產生方式.產生的資訊 6 (CQ) 和 5 (73) 將始終包含您的完整呼號.jt65 和 jt9 協定允許在您的完整呼叫中使用一些標準資訊, 而犧牲了另一條資訊, 如 DX 呼叫或您的定位.&lt;/p&gt;&lt;p&gt;選擇資訊1省略 DX 呼號, 這在答覆 CQ 呼叫時可能是一個問題.選擇資訊3也會省略 DX 呼號, 此軟體和其他軟體的許多版本都不會提取報告.選擇這兩個都意味著你的完整呼號只會出現在你的資訊 5 (73) 中, 所以你的通聯夥伴我的日誌是出錯誤的呼號.&lt;/p&gt;&lt;p&gt;這些選項都不是完美的, 資訊 3 是最好的, 但請注意, 您的通聯合作夥伴可能不會記錄您傳送的報告.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="141"/>
<source>Full call in Tx1</source>
<translation>完整呼號在 發射1</translation>
</message>
<message>
<location filename="../Configuration.ui" line="146"/>
<source>Full call in Tx3</source>
<translation>完整呼號在 發射3</translation>
</message>
<message>
<location filename="../Configuration.ui" line="151"/>
<source>Full call in Tx5 only</source>
<translation>完整呼號在 發射5</translation>
</message>
<message>
<location filename="../Configuration.ui" line="171"/>
<source>Display</source>
<translation>顯示</translation>
</message>
<message>
<location filename="../Configuration.ui" line="177"/>
<source>Show outgoing transmitted messages in the Rx frequency window.</source>
<translation>在接收信息窗口中顯示已發射的信息.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="180"/>
<source>&amp;Tx messages to Rx frequency window</source>
<translation>發出訊息在接收信息窗口顯示(&amp;T)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="187"/>
<source>Show if decoded stations are new DXCC entities or worked before.</source>
<translation>顯示解碼的電臺是新的 DXCC 實體還是以前曾經通聯.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="190"/>
<source>Show &amp;DXCC, grid, and worked-before status</source>
<translation>顯示 &amp;DXCC、網格與曾經通聯狀態</translation>
</message>
<message>
<location filename="../Configuration.ui" line="200"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check to have decodes for a new period start at the top of the Band Activity window and not scroll off the top when the window is full.&lt;/p&gt;&lt;p&gt;This is to aid selecting decodes to double-click while decoding is still in progress. Use the Band Activity vertical scroll bar to reveal decodes past the bottom of the window.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;檢查新週期的解碼從 波段活動 視窗的頂部開始,而不是在視窗已滿時從頂部滾動.&lt;/p&gt;&lt;p&gt;這是為了幫助選擇解碼, 以按兩下, 而解碼仍在進行中. 使用 波段活動 垂直滾動條顯示視窗底部的解碼.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="203"/>
<source>Start new period decodes at top</source>
<translation>在頂部開始新期間解碼</translation>
</message>
<message>
<location filename="../Configuration.ui" line="210"/>
<source>Show principal prefix instead of country name</source>
<translation>顯示主體前綴而不是國家 地區名稱</translation>
</message>
<message>
<location filename="../Configuration.ui" line="234"/>
<source>Set the font characteristics for the application.</source>
<translation>設置應用程序的字體.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="237"/>
<source>Font...</source>
<translation>軟件字體...</translation>
</message>
<message>
<location filename="../Configuration.ui" line="244"/>
<source>Set the font characteristics for the Band Activity and Rx Frequency areas.</source>
<translation>設置波段活動和接收信息窗口的字體.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="247"/>
<source>Decoded Text Font...</source>
<translation>解碼字體...</translation>
</message>
<message>
<location filename="../Configuration.ui" line="271"/>
<source>Include a separator line between periods in the band activity window.</source>
<translation>在波段活動窗口中加入時間分隔行.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="274"/>
<source>&amp;Blank line between decoding periods</source>
<translation>每解碼周期插入間隔行(&amp;B)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="281"/>
<source>Show distance to DX station in miles rather than kilometers.</source>
<translation>以英里為單位顯示 DX 電臺的距離 而不是顯示公里.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="284"/>
<source>Display dista&amp;nce in miles</source>
<translation>顯示距離為英里(&amp;n)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="301"/>
<source>Behavior</source>
<translation>慣常方式</translation>
</message>
<message>
<location filename="../Configuration.ui" line="307"/>
<source>Decode after EME delay</source>
<translation>EME 延遲後解碼</translation>
</message>
<message>
<location filename="../Configuration.ui" line="329"/>
<source>Tx watchdog:</source>
<translation>發射監管計時器:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="339"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Number of minutes before unattended transmissions are aborted&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;無人值守傳輸時到達設定分鐘數中止發射&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="342"/>
<source>Disabled</source>
<translation>停用</translation>
</message>
<message>
<location filename="../Configuration.ui" line="345"/>
<source> minutes</source>
<translation> 分鐘</translation>
</message>
<message>
<location filename="../Configuration.ui" line="360"/>
<source>Enable VHF/UHF/Microwave features</source>
<translation>啟用 VHF/UHF/Microwave 功能</translation>
</message>
<message>
<location filename="../Configuration.ui" line="367"/>
<source>Single decode</source>
<translation>單獨解碼</translation>
</message>
<message>
<location filename="../Configuration.ui" line="374"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Some rigs are not able to process CAT commands while transmitting. This means that if you are operating in split mode you may have to uncheck this option.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;某些無線電設備在發射時無法處理CAT 命令.這意味着, 如果您在異頻模式下運行, 則可能必須取消選中此選項.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="377"/>
<source>Allow Tx frequency changes while transmitting</source>
<translation>允許發射期間改變頻率</translation>
</message>
<message>
<location filename="../Configuration.ui" line="384"/>
<source>Don&apos;t start decoding until the monitor button is clicked.</source>
<translation>軟件開啟時, 關閉監聽按鈕.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="387"/>
<source>Mon&amp;itor off at startup</source>
<translation>開啟時關閉監聽(&amp;i)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="397"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check this if you wish to automatically return to the last monitored frequency when monitor is enabled, leave it unchecked if you wish to have the current rig frequency maintained.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;如果您希望在啟用監聽時自動返回到最後一個監聽頻率.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="400"/>
<source>Monitor returns to last used frequency</source>
<translation>開始監聽時使用上一次的頻率</translation>
</message>
<message>
<location filename="../Configuration.ui" line="407"/>
<source>Alternate F1-F6 bindings</source>
<translation>備用 F1-F6 綁定</translation>
</message>
<message>
<location filename="../Configuration.ui" line="414"/>
<source>Turns off automatic transmissions after sending a 73 or any other free
text message.</source>
<translation>傳送 73 或任何其他自由文本消息後
關閉自動發射.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="418"/>
<source>Di&amp;sable Tx after sending 73</source>
<translation>傳送 73 後關閉發射(&amp;s)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="427"/>
<source>Send a CW ID after every 73 or free text message.</source>
<translation>73或自定義信息發出後用CW模式發放你的呼號.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="430"/>
<source>CW ID a&amp;fter 73</source>
<translation>73發出後用CW模式發放你呼號(&amp;f)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="456"/>
<source>Periodic CW ID Inter&amp;val:</source>
<translation>發射CW信息時間間隔(&amp;v):</translation>
</message>
<message>
<location filename="../Configuration.ui" line="466"/>
<source>Send a CW ID periodically every few minutes.
This might be required under your countries licence regulations.
It will not interfere with other users as it is always sent in the
quiet period when decoding is done.</source>
<translation>每隔几分鐘定期發送 CW ID.
這可能是必需根據您所在的國家/地區的執照規定.
它不會干擾其他用戶,因為它總是
在解碼完成後的安靜期間發送.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="478"/>
<source>Automatic transmission mode.</source>
<translation>自動發射模式.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="481"/>
<source>Doubl&amp;e-click on call sets Tx enable</source>
<translation>雙擊呼號集啟用發射(&amp;e)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="488"/>
<source>Calling CQ forces Call 1st</source>
<translation>呼叫 CQ 強制呼叫第 1</translation>
</message>
<message>
<location filename="../Configuration.ui" line="512"/>
<source>&amp;Radio</source>
<translation>電臺(&amp;R)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="515"/>
<source>Radio interface configuration settings.</source>
<translation>設置無線電設備接口設置.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="527"/>
<source>Settings that control your CAT interface.</source>
<translation>控制CAT界面的設置.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="530"/>
<source>CAT Control</source>
<translation>CAT控制</translation>
</message>
<message>
<location filename="../Configuration.ui" line="541"/>
<location filename="../Configuration.ui" line="1003"/>
<source>Port:</source>
<translation>端口:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="557"/>
<source>Serial port used for CAT control.</source>
<translation>用於CAT控制的串行端口.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="581"/>
<source>Serial Port Parameters</source>
<translation>串口參數</translation>
</message>
<message>
<location filename="../Configuration.ui" line="592"/>
<source>Baud Rate:</source>
<translation>波特率:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="608"/>
<source>Serial port data rate which must match the setting of your radio.</source>
<translation>串行端口數據速率必須與您的無線電設置相匹配.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="615"/>
<source>1200</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="620"/>
<source>2400</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="625"/>
<source>4800</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="630"/>
<source>9600</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="635"/>
<source>19200</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="640"/>
<source>38400</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="645"/>
<source>57600</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="650"/>
<source>115200</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="660"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Number of data bits used to communicate with your radio&apos;s CAT interface (usually eight).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;用於與無線電設備 CAT 接口通信的數據位數 (通常為 8 ).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="663"/>
<source>Data Bits</source>
<translation>數據位元</translation>
</message>
<message>
<location filename="../Configuration.ui" line="669"/>
<source>D&amp;efault</source>
<translation>默認值(&amp;e)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="682"/>
<source>Se&amp;ven</source>
<translation>Se&amp;ven 7</translation>
</message>
<message>
<location filename="../Configuration.ui" line="695"/>
<source>E&amp;ight</source>
<translation>E&amp;ight 8</translation>
</message>
<message>
<location filename="../Configuration.ui" line="711"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Number of stop bits used when communicating with your radio&apos;s CAT interface&lt;/p&gt;&lt;p&gt;(consult you radio&apos;s manual for details).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;與無線電設備 CAT 接口通信時使用的停止位數&lt;/p&gt;&lt;p&gt;(詳情請參閱無線電設備手冊).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="714"/>
<source>Stop Bits</source>
<translation>停止位元</translation>
</message>
<message>
<location filename="../Configuration.ui" line="720"/>
<location filename="../Configuration.ui" line="768"/>
<source>Default</source>
<translation>默認值</translation>
</message>
<message>
<location filename="../Configuration.ui" line="733"/>
<source>On&amp;e</source>
<translation>On&amp;e 1</translation>
</message>
<message>
<location filename="../Configuration.ui" line="743"/>
<source>T&amp;wo</source>
<translation>T&amp;wo 2</translation>
</message>
<message>
<location filename="../Configuration.ui" line="759"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Flow control protocol used between this computer and your radio&apos;s CAT interface (usually &amp;quot;None&amp;quot; but some require &amp;quot;Hardware&amp;quot;).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;電腦和無線電設備 CAT 接口 之間使用的流量控制協議 (通常是 &quot;None&quot;,但有些要求&quot;硬件&quot;).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="762"/>
<source>Handshake</source>
<translation>握手方式</translation>
</message>
<message>
<location filename="../Configuration.ui" line="781"/>
<source>&amp;None</source>
<translation>無(&amp;N)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="794"/>
<source>Software flow control (very rare on CAT interfaces).</source>
<translation>軟件控制流 (在CAT接口上非常罕見).</translation>
</message>
<message>
<location filename="../Configuration.ui" line="797"/>
<source>XON/XOFF</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="807"/>
<source>Flow control using the RTS and CTS RS-232 control lines
not often used but some radios have it as an option and
a few, particularly some Kenwood rigs, require it).</source>
<translation>使用 RTS 和 CTS RS-232 控制線控制
不經常使用但有些無線電設備有它作為一個選項並且
很少,特別是一些 健伍無線電設備,需要它).</translation>
</message>
<message>
<location filename="../Configuration.ui" line="812"/>
<source>&amp;Hardware</source>
<translation>硬件(&amp;H)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="825"/>
<source>Special control of CAT port control lines.</source>
<translation>特殊控制的CAT控制線.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="828"/>
<source>Force Control Lines</source>
<translation>強制控制線</translation>
</message>
<message>
<location filename="../Configuration.ui" line="845"/>
<location filename="../Configuration.ui" line="888"/>
<source>High</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="850"/>
<location filename="../Configuration.ui" line="893"/>
<source>Low</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="858"/>
<source>DTR:</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="872"/>
<source>RTS:</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="932"/>
<source>How this program activates the PTT on your radio?</source>
<translation>此程式如何啟動無線電設備上的 PTT?</translation>
</message>
<message>
<location filename="../Configuration.ui" line="935"/>
<source>PTT Method</source>
<translation>PTT 方法</translation>
</message>
<message>
<location filename="../Configuration.ui" line="941"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;No PTT activation, instead the radio&apos;s automatic VOX is used to key the transmitter.&lt;/p&gt;&lt;p&gt;Use this if you have no radio interface hardware.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;如果您沒有無線電設備接口硬件,沒法PTT而是使用無線電設備的自動聲控來發射,請使用此選項.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="944"/>
<source>VO&amp;X</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="954"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Use the RS-232 DTR control line to toggle your radio&apos;s PTT, requires hardware to interface the line.&lt;/p&gt;&lt;p&gt;Some commercial interface units also use this method.&lt;/p&gt;&lt;p&gt;The DTR control line of the CAT serial port may be used for this or a DTR control line on a different serial port may be used.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;使用 RS-232 DTR 控制線路切換無線電設備的 PTT, 需要硬體來介面線路.&lt;/p&gt;&lt;p&gt;某些商業介面單元也使用此方法.&lt;/p&gt;&lt;p&gt;CAT 串列埠的 DTR 控制線路可用於此或可用於其他串行埠上的 DTR 控制線路.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="957"/>
<source>&amp;DTR</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="970"/>
<source>Some radios support PTT via CAT commands,
use this option if your radio supports it and you have no
other hardware interface for PTT.</source>
<translation>一些無線電設備通過CAT命令支持 PTT,
如果您的無線電設備支持此選項請使用此選項而且您沒有
PTT的其它硬件接口.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="975"/>
<source>C&amp;AT</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="985"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Use the RS-232 RTS control line to toggle your radio&apos;s PTT, requires hardware to interface the line.&lt;/p&gt;&lt;p&gt;Some commercial interface units also use this method.&lt;/p&gt;&lt;p&gt;The RTS control line of the CAT serial port may be used for this or a RTS control line on a different serial port may be used. Note that this option is not available on the CAT serial port when hardware flow control is used.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;使用 RS-232 RTS 控制線路切換無線電設備的 PTT, 需要硬體來介面線路.&lt;/p&gt;&lt;p&gt;某些商業介面單元也使用此方法.&lt;/p&gt;&lt;p&gt;CAT 串列埠的 RTS 控制線路可用於此或可能用於其他串行埠上的 RTS 控制線路. 請注意,使用硬體流控制時, CAT 串行埠上不可用此選項.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="988"/>
<source>R&amp;TS</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="1019"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Select the RS-232 serial port utilised for PTT control, this option is available when DTR or RTS is selected above as a transmit method.&lt;/p&gt;&lt;p&gt;This port can be the same one as the one used for CAT control.&lt;/p&gt;&lt;p&gt;For some interface types the special value CAT may be chosen, this is used for non-serial CAT interfaces that can control serial port control lines remotely (OmniRig for example).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇用於 ptt 控制的RS-232 串行端口,當選擇上述DTR或RTS作為發射方法時,此選項可用.此端口可以與用於CAT控制的端口相同.對於某些接口類型,可以選擇特殊值CAT,這用於可以遠程控制串口控制線的非串行CAT接口 (例如 omnirig).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1043"/>
<source>Modulation mode selected on radio.</source>
<translation>在無線電設備上選擇的調制模式.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1046"/>
<source>Mode</source>
<translation>模式</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1052"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;USB is usually the correct modulation mode,&lt;/p&gt;&lt;p&gt;unless the radio has a special data or packet mode setting&lt;/p&gt;&lt;p&gt;for AFSK operation.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;上邊帶通常是正確的調制模式,除非無線電設備具有用於AFSK操作的特殊數據或數據包模式設置.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1055"/>
<source>US&amp;B</source>
<translation>上邊帶(&amp;B)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1068"/>
<source>Don&apos;t allow the program to set the radio mode
(not recommended but use if the wrong mode
or bandwidth is selected).</source>
<translation>不允許程序設置無線電設備模式
(不建議使用但如果選擇錯誤的模式
或帶寬).</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1073"/>
<location filename="../Configuration.ui" line="1307"/>
<source>None</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="1083"/>
<source>If this is available then it is usually the correct mode for this program.</source>
<translation>如果這是可用的, 那麼它通常是這個程式的正確模式.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1086"/>
<source>Data/P&amp;kt</source>
<translation>數據/封包(&amp;k)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1099"/>
<source>Some radios can select the audio input using a CAT command,
this setting allows you to select which audio input will be used
(if it is available then generally the Rear/Data option is best).</source>
<translation>一些無線電設備可以使用 CAT 命令選擇音頻輸入,
此設置允許您選擇將使用的音頻輸入
(如果可用,則通常 後方/數據 選項是最佳選擇).</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1104"/>
<source>Transmit Audio Source</source>
<translation>無線電設備音頻源</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1110"/>
<source>Rear&amp;/Data</source>
<translation>後方&amp;/數據口</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1120"/>
<source>&amp;Front/Mic</source>
<translation>前方/咪高峰(&amp;F)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1171"/>
<source>Rig:</source>
<translation>無線電設備:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1191"/>
<source>Poll Interval:</source>
<translation>時間間隔:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1201"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Interval to poll rig for status. Longer intervals will mean that changes to the rig will take longer to be detected.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;為軟件與無線電設備溝通的時間間隔.時間間隔較長,意味着對無線電設備的更改需要更長的時間才能檢測到.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1204"/>
<source> s</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="1225"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Attempt to connect to the radio with these settings.&lt;/p&gt;&lt;p&gt;The button will turn green if the connection is successful or red if there is a problem.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;嘗試使用這些設置連接到無線電設備.如果連接成功,該按鈕將變為綠色; 如果有問題,則為紅色.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1228"/>
<source>Test CAT</source>
<translation>測試 CAT</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1251"/>
<source>Attempt to activate the transmitter.
Click again to deactivate. Normally no power should be
output since there is no audio being generated at this time.
Check that any Tx indication on your radio and/or your
radio interface behave as expected.</source>
<translation>嘗試激活無線電設備.
再次單擊以停用.通常沒有功率輸出
因為此時沒有音頻生成.檢查無線電設備
和/或您的無線電設備接口上
的任何發射指示是否如預期的那樣.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1269"/>
<source>Test PTT</source>
<translation>測試 PTT</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1281"/>
<source>Split Operation</source>
<translation>異頻操作</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1287"/>
<source>Fake It</source>
<translation>虛假</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1297"/>
<source>Rig</source>
<translation>無線電設備</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1337"/>
<source>A&amp;udio</source>
<translation>音頻(&amp;u)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1340"/>
<source>Audio interface settings</source>
<translation>音頻接口設置</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1346"/>
<source>Souncard</source>
<translation>音效卡</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1349"/>
<source>Soundcard</source>
<translation>音效卡</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1361"/>
<source>Select the audio CODEC to use for transmitting.
If this is your default device for system sounds then
ensure that all system sounds are disabled otherwise
you will broadcast any systems sounds generated during
transmitting periods.</source>
<translation>選擇要用於發射的音頻信號.
如果這是您的默認值設備的系統聲音
然後確保所有系統聲音被禁用
否則您將任何系統生成的聲音
向外發射輸出.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1378"/>
<source>Select the audio CODEC to use for receiving.</source>
<translation>選擇要用於接收的音頻信號.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1385"/>
<source>&amp;Input:</source>
<translation>輸入(&amp;I):</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1395"/>
<source>Select the channel to use for receiving.</source>
<translation>選擇要用於接收的通道.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1399"/>
<location filename="../Configuration.ui" line="1429"/>
<source>Mono</source>
<translation>單聲道</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1404"/>
<location filename="../Configuration.ui" line="1434"/>
<source>Left</source>
<translation>左聲道</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1409"/>
<location filename="../Configuration.ui" line="1439"/>
<source>Right</source>
<translation>右聲道</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1414"/>
<location filename="../Configuration.ui" line="1444"/>
<source>Both</source>
<translation>雙聲道</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1422"/>
<source>Select the audio channel used for transmission.
Unless you have multiple radios connected on different
channels; then you will usually want to select mono or
both here.</source>
<translation>選擇用於發射的音頻通道.
除非您在不同無線電設備連接多個到不同的
通道; 那麼你通常會想要選擇單聲道或
雙聲道.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1452"/>
<source>Ou&amp;tput:</source>
<translation>輸出(&amp;t):</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1465"/>
<location filename="../Configuration.ui" line="1468"/>
<source>Save Directory</source>
<translation>儲存目錄</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1474"/>
<source>Loc&amp;ation:</source>
<translation>目錄位置(&amp;a):</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1490"/>
<source>Path to which .WAV files are saved.</source>
<translation>.WAV 檔案被儲存到哪條路徑.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1499"/>
<location filename="../Configuration.ui" line="1547"/>
<source>TextLabel</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="1506"/>
<source>Click to select a different save directory for .WAV files.</source>
<translation>單擊選擇不同的儲存目錄 .WAV 檔案.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1509"/>
<source>S&amp;elect</source>
<translation>選擇(&amp;e)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1519"/>
<location filename="../Configuration.ui" line="1522"/>
<source>AzEl Directory</source>
<translation>AzEl 目錄</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1528"/>
<source>Location:</source>
<translation>位置:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1554"/>
<source>Select</source>
<translation>選擇</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1564"/>
<source>Power Memory By Band</source>
<translation>依頻段記憶功率</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1567"/>
<source>Remember power settings by band</source>
<translation>按頻段功率記憶設定</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1573"/>
<source>Enable power memory during transmit</source>
<translation>在傳輸過程中啟用功率記憶</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1576"/>
<source>Transmit</source>
<translation>發射</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1583"/>
<source>Enable power memory during tuning</source>
<translation>在調諧期間開啟功率記憶</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1586"/>
<source>Tune</source>
<translation>調諧</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1610"/>
<source>Tx &amp;Macros</source>
<translation>自定義文字(&amp;M)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1613"/>
<source>Canned free text messages setup</source>
<translation>設置自定義文字</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1619"/>
<source>&amp;Add</source>
<translation>增加(&amp;A)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1629"/>
<source>&amp;Delete</source>
<translation>删除(&amp;D)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1639"/>
<source>Drag and drop items to rearrange order
Right click for item specific actions
Click, SHIFT+Click and, CRTL+Click to select items</source>
<translation>拖放項目以重新排列順序
右鍵按下項目的操作
單擊, SHIFT+單擊 和, CRTL+單擊 以選擇專案</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1692"/>
<source>Reportin&amp;g</source>
<translation>報告(&amp;g)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1695"/>
<source>Reporting and logging settings</source>
<translation>設置日誌和報告</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1701"/>
<source>Logging</source>
<translation>記錄日誌</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1707"/>
<source>The program will pop up a partially completed Log QSO dialog when you send a 73 or free text message.</source>
<translation>當您發送73或自定義文字時,程序將彈出一個部分完成的日誌通聯對話框.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1710"/>
<source>Promp&amp;t me to log QSO</source>
<translation>提示我記錄通聯日誌(&amp;t)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1730"/>
<source>Op Call:</source>
<translation>操作員呼號:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1740"/>
<source>Some logging programs will not accept the type of reports
saved by this program.
Check this option to save the sent and received reports in the
comments field.</source>
<translation>一些日誌程序不接受這種類型的報告
由該程序儲存.
選中此選項可將發送和接收的報告儲存在
注釋字段.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1746"/>
<source>d&amp;B reports to comments</source>
<translation>把d&amp;B報告寫入注釋欄</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1753"/>
<source>Check this option to force the clearing of the DX Call
and DX Grid fields when a 73 or free text message is sent.</source>
<translation>選中此選項當發送73或自定義文字信息可強制清除DX呼叫
和DX網格字段.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1757"/>
<source>Clear &amp;DX call and grid after logging</source>
<translation>記錄完成後清除&amp;DX呼號及網格</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1764"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Some logging programs will not accept WSJT-X mode names.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;某些紀錄紀錄程式不接受 WSJT-X 模式名稱.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1767"/>
<source>Con&amp;vert mode to RTTY</source>
<translation>把日誌記錄轉成&amp;RTTY模式</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1774"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;The callsign of the operator, if different from the station callsign.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;操作員的呼號 (如果與電臺呼號不同).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1781"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check to have QSOs logged automatically, when complete.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇當完成通聯後, 自動記錄.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1784"/>
<source>Log automatically (contesting only)</source>
<translation>日誌自記錄 (僅限競赛)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1801"/>
<source>Network Services</source>
<translation>網絡服務</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1807"/>
<source>The program can send your station details and all
decoded signals as spots to the http://pskreporter.info web site.
This is used for reverse beacon analysis which is very useful
for assessing propagation and system performance.</source>
<translation>該程序可以發送您的站的詳細信息和所有
解碼信號作為點的 http://pskreporter.info 的網站.
這是用於反向信標分析,這是非常有用的
用於評估傳播和系統性能.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1813"/>
<source>Enable &amp;PSK Reporter Spotting</source>
<translation>啟用&amp;PSK Reporter Spotting</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1823"/>
<source>UDP Server</source>
<translation>UDP服務器</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1834"/>
<source>UDP Server:</source>
<translation>UDP服務器:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1850"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Optional hostname of network service to receive decodes.&lt;/p&gt;&lt;p&gt;Formats:&lt;/p&gt;&lt;ul style=&quot;margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;&quot;&gt;&lt;li style=&quot; margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;hostname&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv4 address&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv6 address&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv4 multicast group address&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv6 multicast group address&lt;/li&gt;&lt;/ul&gt;&lt;p&gt;Clearing this field will disable the broadcasting of UDP status updates.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;接收解碼的網絡服務的可選主機名稱.&lt;/p&gt;&lt;p&gt;格式:&lt;/p&gt;&lt;ul style=&quot;margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;&quot;&gt;&lt;li style=&quot; margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;主機名稱&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv4 address&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv6 地址&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv4多點傳送組地址&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv6 多點傳送組地址&lt;/li&gt;&lt;/ul&gt;&lt;p&gt;清除此字段將禁用UDP狀態更新的廣播.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1860"/>
<source>UDP Server port number:</source>
<translation>主要UDP服務器端口:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1870"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Enter the service port number of the UDP server that WSJT-X should send updates to. If this is zero no updates will be broadcast.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;輸入 WSJT-X 應向其發送更新的 UDP 伺服器的服務埠號. 如果為零, 將不會廣播任何更新.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1887"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;With this enabled WSJT-X will accept certain requests back from a UDP server that receives decode messages.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;啟用此功能後,WSJT-X 將接受來自接收解碼消息的 UDP 伺服器的某些請求.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1890"/>
<source>Accept UDP requests</source>
<translation>接受UDP請求</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1897"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Indicate acceptance of an incoming UDP request. The effect of this option varies depending on the operating system and window manager, its intent is to notify the acceptance of an incoming UDP request even if this application is minimized or hidden.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;指示接受傳入的 UDP 請求.此選項的效果因操作系統和窗口管理器而異,其目的是通知接受傳入的 UDP 請求,即使此應用程序最小化或隱藏&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1900"/>
<source>Notify on accepted UDP request</source>
<translation>在接受UDP的請求時通知</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1907"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Restore the window from minimized if an UDP request is accepted.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;如果接受 UDP 請求,則從最小化還原窗口.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1910"/>
<source>Accepted UDP request restores window</source>
<translation>接受UDP請求還原窗口</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1922"/>
<source>Secondary UDP Server (deprecated)</source>
<translation>輔助UDP 伺服器 (已棄用)</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1928"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;When checked, WSJT-X will broadcast a logged contact in ADIF format to the configured hostname and port. &lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇後, WSJT-X 將以 ADIF 格式將記錄的聯絡廣播到設定的主機名稱和埠. &lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1931"/>
<source>Enable logged contact ADIF broadcast</source>
<translation>開啟記錄連絡 ADIF 廣播</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1938"/>
<source>Server name or IP address:</source>
<translation>伺服器名稱或 IP 位址:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1948"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Optional host name of N1MM Logger+ program to receive ADIF UDP broadcasts. This is usually &apos;localhost&apos; or ip address 127.0.0.1&lt;/p&gt;&lt;p&gt;Formats:&lt;/p&gt;&lt;ul style=&quot;margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;&quot;&gt;&lt;li style=&quot; margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;hostname&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv4 address&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv6 address&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv4 multicast group address&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv6 multicast group address&lt;/li&gt;&lt;/ul&gt;&lt;p&gt;Clearing this field will disable broadcasting of ADIF information via UDP.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;N1MM Logger+ 程式可選電腦主機用於接收 ADIF UDP 廣播. 這通常是 &apos;localhost&apos; 或 IP 地址 127.0.0.1&lt;/p&gt;&lt;p&gt;格式:&lt;/p&gt;&lt;ul style=&quot;margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;&quot;&gt;&lt;li style=&quot; margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;主機名稱&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv4 地址&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv6 地址&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv4 多播組地址&lt;/li&gt;&lt;li style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;IPv6 多播組地址&lt;/li&gt;&lt;/ul&gt;&lt;p&gt;清除此欄位將停用透過UDP廣播ADIF資訊.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1955"/>
<source>Server port number:</source>
<translation>伺服器連接埠號:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1965"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Enter the port number that WSJT-X should use for UDP broadcasts of ADIF log information. For N1MM Logger+, this value should be 2333. If this is zero, no updates will be broadcast.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;輸入 WSJT-X 應用於 ADIF 日誌資訊的 UDP 廣播的埠號. 對於 N1MM Logger+, 此值應為 2333. 如果為零, 將不會廣播任何更新.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1989"/>
<source>Frequencies</source>
<translation>頻率</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1992"/>
<source>Default frequencies and band specific station details setup</source>
<translation>設置默認值頻率和帶寬點特定的電臺詳細信息</translation>
</message>
<message>
<location filename="../Configuration.ui" line="1998"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;See &amp;quot;Frequency Calibration&amp;quot; in the WSJT-X User Guide for details of how to determine these parameters for your radio.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;閱讀 &amp;quot;頻率校準&amp;quot; 在 WSJT-X 使用者指南中, 有關如何確定無線電的這些參數的詳細資訊.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2001"/>
<source>Frequency Calibration</source>
<translation>頻率校准</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2009"/>
<source>Slope:</source>
<translation>傾斜率:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2022"/>
<source> ppm</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="2048"/>
<source>Intercept:</source>
<translation>攔截:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2061"/>
<source> Hz</source>
<translation> 赫茲</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2098"/>
<source>Working Frequencies</source>
<translation>工作頻率</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2113"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Right click to maintain the working frequencies list.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;右鍵按一下以保持工作頻率清單.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2141"/>
<source>Station Information</source>
<translation>電臺信息</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2153"/>
<source>Items may be edited.
Right click for insert and delete options.</source>
<translation>專案可以編輯
右鍵按下以插入與刪除選項.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2201"/>
<source>Colors</source>
<translation>顏色</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2207"/>
<source>Decode Highlightling</source>
<translation>解碼突出顯示</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2262"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Enable or disable using the check boxes and right-click an item to change or unset the foreground color, background color, or reset the item to default values. Drag and drop the items to change their priority, higher in the list is higher in priority.&lt;/p&gt;&lt;p&gt;Note that each foreground or background color may be either set or unset, unset means that it is not allocated for that item&apos;s type and lower priority items may apply.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;使用複選框啟用或禁用專案, 並右鍵單擊專案以更改或取消設置前景顏色, 背景顏色, 或將專案重置為預設值. 拖放專案以更改其優先順序, 清單中較高的優先順序較高.&lt;/p&gt;&lt;p&gt; 請注意,每個前景或背景顏色都可以設置或取消設置, 未設置意味著未為該專案分配該類型, 低優先順序項可能適用.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2231"/>
<source>Rescan ADIF Log</source>
<translation>重新掃描 ADIF 日誌</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2240"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Push to reset all highlight items above to default values and priorities.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;推送將上述所有突出顯示項重置為預設值和優先順序.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2243"/>
<source>Reset Highlighting</source>
<translation>重置突顯顯示</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2287"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Check to indicate new DXCC entities, grid squares, and callsigns per mode.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;選擇以指示每個模式新的 DXCC 實體, 網格和呼號.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2290"/>
<source>Highlight by Mode</source>
<translation>依模式突顯</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2297"/>
<source>Include extra WAE entities</source>
<translation>包括額外的 WAE 實體</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2304"/>
<source>Check to for grid highlighting to only apply to unworked grid fields</source>
<translation>檢查到格線突出顯示僅套用於未通聯的網格欄位</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2307"/>
<source>Only grid Fields sought</source>
<translation>只尋求格格欄位</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2317"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Controls for Logbook of the World user lookup.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;控制 LoTW 使用者查找日誌.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2320"/>
<source>Logbook of the World User Validation</source>
<translation>LoTW 使用者驗證</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2326"/>
<source>Users CSV file URL:</source>
<translation>使用者 CSV 檔案網址:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2338"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;URL of the ARRL LotW user&apos;s last upload dates and times data file which is used to highlight decodes from stations that are known to upload their log file to LotW.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;ARRL LoTW 使用者上次上傳日期和時間資料檔案的網址, 該檔案用於突出顯示已知將紀錄檔上載到 LoTW 的電臺的解碼.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2341"/>
<source>https://lotw.arrl.org/lotw-user-activity.csv</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="2348"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Push this button to fetch the latest LotW user&apos;s upload date and time data file.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;按下這個按鈕即可取得最新的 LoRW 使用者的上傳日期和時間資料檔.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2351"/>
<source>Fetch Now</source>
<translation>立即取得</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2360"/>
<source>Age of last upload less than:</source>
<translation>上次上傳的日期小於:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2370"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Adjust this spin box to set the age threshold of LotW user&apos;s last upload date that is accepted as a current LotW user.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;調整此旋轉框以設定 LoTW 使用者最後一個上傳日期的日期閾值,該日期被接受為當前 LoTW 使用者.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2373"/>
<source> days</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="2419"/>
<source>Advanced</source>
<translation>高級設置</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2425"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;User-selectable parameters for JT65 VHF/UHF/Microwave decoding.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;用戶可選參數用於JT65 VHF/UHF/Microwave 的解碼.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2428"/>
<source>JT65 VHF/UHF/Microwave decoding parameters</source>
<translation>JT65 VHF/UHF/Microwave 解碼參數</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2434"/>
<source>Random erasure patterns:</source>
<translation>隨機擦除模式:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2444"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Maximum number of erasure patterns for stochastic soft-decision Reed Solomon decoder is 10^(n/2).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;隨機軟決策 Reed Solomon 解碼器的最大擦除模式數為 10^(n/2).&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2460"/>
<source>Aggressive decoding level:</source>
<translation>主動解碼等級:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2470"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Higher levels will increase the probability of decoding, but will also increase probability of a false decode.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;較高的水準會增加解碼的概率,但也會增加錯誤解碼的概率.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2480"/>
<source>Two-pass decoding</source>
<translation>以二次解碼</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2493"/>
<source>Special operating activity: Generation of FT4, FT8, and MSK144 messages</source>
<translation>特殊操作活動: 產生FT4, FT8 和 MSK144 信息</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2505"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;FT8 DXpedition mode: Hound operator calling the DX.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;FT8 DX遠征模式呼叫DX的獵犬操作員.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2508"/>
<source>Hound</source>
<translation>獵犬</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2527"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;North American VHF/UHF/Microwave contests and others in which a 4-character grid locator is the required exchange.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;北美 VHF/UHF/Microwave 競賽和其他需要交換的 4 個字元網格定位的競賽.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2530"/>
<source>NA VHF Contest</source>
<translation>NA VHF 競賽</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2540"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;FT8 DXpedition mode: Fox (DXpedition) operator.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;FT8 DX远征模式: 狐狸 (DX远征) 操作员.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2543"/>
<source>Fox</source>
<translation>狐狸</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2562"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;European VHF+ contests requiring a signal report, serial number, and 6-character locator.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;歐洲 VHF+ 競賽需要信號報告, 序列號和 6 個字元定位.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2565"/>
<source>EU VHF Contest</source>
<translation>EU VHF 競賽</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2590"/>
<location filename="../Configuration.ui" line="2634"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;ARRL RTTY Roundup and similar contests. Exchange is US state, Canadian province, or &amp;quot;DX&amp;quot;.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;ARRL RTTY Roundup 和類似的比賽. 交換是美國的州, 加拿大省或 &amp;quot;DX&amp;quot;.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2593"/>
<source>RTTY Roundup messages</source>
<translation>RTTY Roundup 信息</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2618"/>
<source>RTTY RU Exch:</source>
<translation>RTTY RU 交換:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2637"/>
<source>NJ</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="2653"/>
<location filename="../Configuration.ui" line="2697"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;ARRL Field Day exchange: number of transmitters, Class, and ARRL/RAC section or &amp;quot;DX&amp;quot;.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;ARRL Field Day 交換: 發射機數量, 類別別, 和 ARRL/RAC 部份或 &amp;quot;DX&amp;quot;.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2656"/>
<source>ARRL Field Day</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="2681"/>
<source>FD Exch:</source>
<translation>FD 交換:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2700"/>
<source>6A SNJ</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="2720"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;World-Wide Digi-mode contest&lt;/p&gt;&lt;p&gt;&lt;br/&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;世界數字模式競賽&lt;/p&gt;&lt;p&gt;&lt;br/&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2723"/>
<source>WW Digi Contest</source>
<translation>世界數字競賽</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2736"/>
<source>Miscellaneous</source>
<translation>雜項</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2742"/>
<source>Degrade S/N of .wav file: </source>
<translation>降低信噪比的 .wav文件: </translation>
</message>
<message>
<location filename="../Configuration.ui" line="2752"/>
<location filename="../Configuration.ui" line="2778"/>
<source>For offline sensitivity tests</source>
<translation>用於離線靈敏度測試</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2755"/>
<source> dB</source>
<translation> 分貝</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2768"/>
<source>Receiver bandwidth:</source>
<translation>接收器頻寬:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2781"/>
<source> Hz</source>
<translation> 赫茲</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2797"/>
<source>Tx delay:</source>
<translation>發射延遲:</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2807"/>
<source>Minimum delay between assertion of PTT and start of Tx audio.</source>
<translation>PTT 驗證與發射音訊啟動之間的最小延遲.</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2810"/>
<source> s</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="2835"/>
<source>Tone spacing</source>
<translation>音調間距</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2841"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Generate Tx audio with twice the normal tone spacing. Intended for special LF/MF transmitters that use a divide-by-2 before generating RF.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;產生具有正常音調間距兩倍的發射音頻. 適用於在產生射頻之前使用除以 2 的特殊 LF/MF 發射器.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2844"/>
<source>x 2</source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="2854"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Generate Tx audio with four times the normal tone spacing. Intended for special LF/MF transmitters that use a divide-by-4 before generating RF.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;具有正常音調間距四倍的發射音頻. 適用於在產生射頻之前使用除以 4 的特殊 LF/MF 發射器.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2857"/>
<source>x 4 </source>
<translation></translation>
</message>
<message>
<location filename="../Configuration.ui" line="2873"/>
<source>Waterfall spectra</source>
<translation>瀑布頻譜</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2879"/>
<source>Low sidelobes</source>
<translation>低側邊</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2889"/>
<source>Most sensitive</source>
<translation>最敏感</translation>
</message>
<message>
<location filename="../Configuration.ui" line="2919"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Discard (Cancel) or apply (OK) configuration changes including&lt;/p&gt;&lt;p&gt;resetting the radio interface and applying any soundcard changes&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;放棄 (取消) 或應用 (確定) 設定更改, 包括&lt;/p&gt;&lt;p&gt;重置無線電介面並套用任何音效卡變更&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
</context>
<context>
<name>main</name>
<message>
<location filename="../main.cpp" line="83"/>
<location filename="../main.cpp" line="408"/>
<source>Fatal error</source>
<translation>嚴重出錯誤</translation>
</message>
<message>
<location filename="../main.cpp" line="88"/>
<location filename="../main.cpp" line="413"/>
<source>Unexpected fatal error</source>
<translation>意外的嚴重出錯誤</translation>
</message>
<message>
<location filename="../main.cpp" line="223"/>
<source>Another instance may be running</source>
<translation>另一個應用程式可能正在執行</translation>
</message>
<message>
<location filename="../main.cpp" line="224"/>
<source>try to remove stale lock file?</source>
<translation>嘗試刪除陳舊的鎖檔?</translation>
</message>
<message>
<location filename="../main.cpp" line="259"/>
<source>Failed to create a temporary directory</source>
<translation>無法建立暫存目錄</translation>
</message>
<message>
<location filename="../main.cpp" line="260"/>
<location filename="../main.cpp" line="268"/>
<source>Path: &quot;%1&quot;</source>
<translation>目錄: &quot;%1&quot;</translation>
</message>
<message>
<location filename="../main.cpp" line="266"/>
<source>Failed to create a usable temporary directory</source>
<translation>無法建立可用的暫存目錄</translation>
</message>
<message>
<location filename="../main.cpp" line="267"/>
<source>Another application may be locking the directory</source>
<translation>另一個應用程式可能正在鎖定目錄</translation>
</message>
<message>
<location filename="../main.cpp" line="300"/>
<source>Failed to create data directory</source>
<translation>無法建立資料目錄</translation>
</message>
<message>
<location filename="../main.cpp" line="301"/>
<source>path: &quot;%1&quot;</source>
<translation>目錄: &quot;%1&quot;</translation>
</message>
<message>
<location filename="../main.cpp" line="356"/>
<source>Shared memory error</source>
<translation>共用記憶體錯誤</translation>
</message>
<message>
<location filename="../main.cpp" line="357"/>
<source>Unable to create shared memory segment</source>
<translation>無法建立共用記憶體段</translation>
</message>
</context>
<context>
<name>wf_palette_design_dialog</name>
<message>
<location filename="../wf_palette_design_dialog.ui" line="14"/>
<source>Palette Designer</source>
<translation>調色盤設計</translation>
</message>
<message>
<location filename="../wf_palette_design_dialog.ui" line="23"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Double click a color to edit it.&lt;/p&gt;&lt;p&gt;Right click to insert or delete colors.&lt;/p&gt;&lt;p&gt;Colors at the top represent weak signals&lt;/p&gt;&lt;p&gt;and colors at the bottom represent strong&lt;/p&gt;&lt;p&gt;signals. You can have up to 256 colors.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;雙擊一種顏色進行編輯.&lt;/p&gt;&lt;p&gt;右鍵單擊可插入或刪除顏色.&lt;/p&gt;&lt;p&gt;頂部的顏色代表微弱的信號&lt;/p&gt;&lt;p&gt;底部的顏色代表強烈&lt;/p&gt;&lt;p&gt;信號. 您最多可以有256種顏色.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
</context>
</TS>