WSJT-X/soundin.cpp
Joe Taylor fce75f9d07 Many changes toward GUI support for JT65B2 and JT65C2 sub-modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/map65@2547 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-08-31 15:51:58 +00:00

411 lines
11 KiB
C++

#include "soundin.h"
#include <stdexcept>
#define NFFT 32768
#define FRAMES_PER_BUFFER 1024
extern "C" {
#include <portaudio.h>
extern struct {
double d8[2*60*96000]; //This is "common/datcom/..." in fortran
float ss[4*322*NFFT];
float savg[4*NFFT];
double fcenter;
int nutc;
int idphi; //Phase correction for Y pol'n, degrees
int mousedf; //User-selected DF
int mousefqso; //User-selected QSO freq (kHz)
int nagain; //1 ==> decode only at fQSO +/- Tol
int ndepth; //How much hinted decoding to do?
int ndiskdat; //1 ==> data read from *.tf2 or *.iq file
int neme; //Hinted decoding tries only for EME calls
int newdat; //1 ==> new data, must do long FFT
int nfa; //Low decode limit (kHz)
int nfb; //High decode limit (kHz)
int nfcal; //Frequency correction, for calibration (Hz)
int nfshift; //Shift of displayed center freq (kHz)
int mcall3; //1 ==> CALL3.TXT has been modified
int ntimeout; //Max for timeouts in Messages and BandMap
int ntol; //+/- decoding range around fQSO (Hz)
int nxant; //1 ==> add 45 deg to measured pol angle
int map65RxLog; //Flags to control log files
int nfsample; //Input sample rate
int nxpol; //1 if using xpol antennas, 0 otherwise
int mode65; //JT65 sub-mode: A=1, B=2, C=4
int nfast; //1 for sub-modes ABC; 2 for B2, C2
int nsave; //Number of s3(64,63) spectra saved
char mycall[12];
char mygrid[6];
char hiscall[12];
char hisgrid[6];
char datetime[20];
} datcom_;
}
typedef struct
{
int kin; //Parameters sent to/from the portaudio callback function
int nrx;
bool bzero;
bool iqswap;
bool b10db;
} paUserData;
//--------------------------------------------------------------- a2dCallback
extern "C" int a2dCallback( const void *inputBuffer, void *outputBuffer,
unsigned long framesToProcess,
const PaStreamCallbackTimeInfo* timeInfo,
PaStreamCallbackFlags statusFlags,
void *userData )
// This routine called by the PortAudio engine when samples are available.
// It may be called at interrupt level, so don't do anything
// that could mess up the system like calling malloc() or free().
{
paUserData *udata=(paUserData*)userData;
(void) outputBuffer; //Prevent unused variable warnings.
(void) timeInfo;
(void) userData;
int nbytes,i,j;
float d4[4*FRAMES_PER_BUFFER];
float d4a[4*FRAMES_PER_BUFFER];
float tmp;
float fac;
if( (statusFlags&paInputOverflow) != 0) {
qDebug() << "Input Overflow";
}
if(udata->bzero) { //Start of a new minute
udata->kin=0; //Reset buffer pointer
udata->bzero=false;
}
nbytes=udata->nrx*8*framesToProcess; //Bytes per frame
memcpy(d4,inputBuffer,nbytes); //Copy all samples to d4
fac=32767.0;
if(udata->b10db) fac=103618.35;
if(udata->nrx==2) {
for(i=0; i<4*int(framesToProcess); i++) { //Negate odd-numbered frames
d4[i]=fac*d4[i];
j=i/4;
if((j%2)==1) d4[i]=-d4[i];
}
if(!udata->iqswap) {
for(i=0; i<int(framesToProcess); i++) {
j=4*i;
tmp=d4[j];
d4[j]=d4[j+1];
d4[j+1]=tmp;
tmp=d4[j+2];
d4[j+2]=d4[j+3];
d4[j+3]=tmp;
}
}
memcpy(&datcom_.d8[2*udata->kin],d4,nbytes); //Copy from d4 to dd()
} else {
int k=0;
for(i=0; i<2*int(framesToProcess); i+=2) { //Negate odd-numbered frames
j=i/2;
if(j%2==0) {
d4a[k++]=fac*d4[i];
d4a[k++]=fac*d4[i+1];
} else {
d4a[k++]=-fac*d4[i];
d4a[k++]=-fac*d4[i+1];
}
d4a[k++]=0.0;
d4a[k++]=0.0;
}
if(!udata->iqswap) {
for(i=0; i<int(framesToProcess); i++) {
j=4*i;
tmp=d4a[j];
d4a[j]=d4a[j+1];
d4a[j+1]=tmp;
}
}
memcpy(&datcom_.d8[2*udata->kin],d4a,2*nbytes); //Copy from d4a to dd()
}
udata->kin += framesToProcess;
return paContinue;
}
void SoundInThread::run() //SoundInThread::run()
{
quitExecution = false;
if (m_net) {
// qDebug() << "Start inputUDP()";
inputUDP();
// qDebug() << "Finished inputUDP()";
return;
}
//---------------------------------------------------- Soundcard Setup
// qDebug() << "Start souncard input";
PaError paerr;
PaStreamParameters inParam;
PaStream *inStream;
paUserData udata;
udata.kin=0; //Buffer pointer
udata.bzero=false; //Flag to request reset of kin
udata.nrx=m_nrx; //Number of polarizations
udata.iqswap=m_IQswap;
udata.b10db=m_10db;
inParam.device=m_nDevIn; //### Input Device Number ###
inParam.channelCount=2*m_nrx; //Number of analog channels
inParam.sampleFormat=paFloat32; //Get floats from Portaudio
inParam.suggestedLatency=0.05;
inParam.hostApiSpecificStreamInfo=NULL;
paerr=Pa_IsFormatSupported(&inParam,NULL,96000.0);
if(paerr<0) {
emit error("PortAudio says requested soundcard format not supported.");
// return;
}
paerr=Pa_OpenStream(&inStream, //Input stream
&inParam, //Input parameters
NULL, //No output parameters
96000.0, //Sample rate
FRAMES_PER_BUFFER, //Frames per buffer
// paClipOff+paDitherOff, //No clipping or dithering
paClipOff, //No clipping
a2dCallback, //Input callbeck routine
&udata); //userdata
paerr=Pa_StartStream(inStream);
if(paerr<0) {
emit error("Failed to start audio input stream.");
return;
}
// const PaStreamInfo* p=Pa_GetStreamInfo(inStream);
bool qe = quitExecution;
int ntrz=99;
int k=0;
int nsec;
int ntr;
int nBusy=0;
int nhsym0=0;
//---------------------------------------------- Soundcard input loop
while (!qe) {
qe = quitExecution;
if (qe) break;
qint64 ms = QDateTime::currentMSecsSinceEpoch() % 86400000;
nsec = ms/1000; // Time according to this computer
ntr = nsec % m_TRperiod;
// Reset buffer pointer and symbol number at start of minute
if(ntr < ntrz or !m_monitoring) {
nhsym0=0;
udata.bzero=true;
}
k=udata.kin;
udata.iqswap=m_IQswap;
udata.b10db=m_10db;
if(m_monitoring) {
if(m_bForceCenterFreq) {
datcom_.fcenter=m_dForceCenterFreq;\
} else {
datcom_.fcenter=144.125;
}
m_hsym=(k-2048)*11025.0/(2048.0*m_rate);
if(m_hsym != nhsym0) {
if(m_dataSinkBusy) {
nBusy++;
} else {
m_dataSinkBusy=true;
emit readyForFFT(k); //Signal to compute new FFTs
}
nhsym0=m_hsym;
}
}
msleep(100);
ntrz=ntr;
}
Pa_StopStream(inStream);
Pa_CloseStream(inStream);
}
void SoundInThread::setSwapIQ(bool b)
{
m_IQswap=b;
}
void SoundInThread::set10db(bool b)
{
m_10db=b;
}
void SoundInThread::setPort(int n) //setPort()
{
if (isRunning()) return;
this->m_udpPort=n;
}
void SoundInThread::setInputDevice(int n) //setInputDevice()
{
if (isRunning()) return;
this->m_nDevIn=n;
}
void SoundInThread::setRate(double rate) //setRate()
{
if (isRunning()) return;
this->m_rate = rate;
}
void SoundInThread::setBufSize(unsigned n) //setBufSize()
{
if (isRunning()) return;
this->bufSize = n;
}
void SoundInThread::setFadd(double x)
{
m_fAdd=x;
}
void SoundInThread::quit() //quit()
{
quitExecution = true;
}
void SoundInThread::setNetwork(bool b) //setNetwork()
{
m_net = b;
}
void SoundInThread::setMonitoring(bool b) //setMonitoring()
{
m_monitoring = b;
}
void SoundInThread::setForceCenterFreqBool(bool b)
{
m_bForceCenterFreq=b;
}
void SoundInThread::setForceCenterFreqMHz(double d)
{
m_dForceCenterFreq=d;
}
void SoundInThread::setNrx(int n) //setNrx()
{
m_nrx = n;
}
int SoundInThread::nrx()
{
return m_nrx;
}
int SoundInThread::mhsym()
{
return m_hsym;
}
void SoundInThread::setPeriod(int n)
{
m_TRperiod=n;
}
//--------------------------------------------------------------- inputUDP()
void SoundInThread::inputUDP()
{
udpSocket = new QUdpSocket();
if(!udpSocket->bind(m_udpPort,QUdpSocket::ShareAddress) )
{
emit error(tr("UDP Socket bind failed."));
return;
}
// Set this socket's total buffer space for received UDP packets
int v=141600;
::setsockopt(udpSocket->socketDescriptor(), SOL_SOCKET, SO_RCVBUF,
(char *)&v, sizeof(v));
bool qe = quitExecution;
struct linradBuffer {
double cfreq;
int msec;
float userfreq;
int iptr;
quint16 iblk;
qint8 nrx;
char iusb;
double d8[174];
} b;
int ntrz=99;
int k=0;
int nsec;
int ntr;
int nhsym0=0;
int iz=174;
int nBusy=0;
// Main loop for input of UDP packets over the network:
while (!qe) {
qe = quitExecution;
if (qe) break;
if (!udpSocket->hasPendingDatagrams()) {
msleep(2); // Sleep if no packet available
} else {
int nBytesRead = udpSocket->readDatagram((char *)&b,1416);
if (nBytesRead != 1416) qDebug() << "UDP Read Error:" << nBytesRead;
qint64 ms = QDateTime::currentMSecsSinceEpoch() % 86400000;
nsec = ms/1000; // Time according to this computer
ntr = nsec % m_TRperiod;
// Reset buffer pointer and symbol number at start of minute
if(ntr < ntrz) {
k=0;
nhsym0=0;
}
ntrz=ntr;
if(m_monitoring) {
m_nrx=b.nrx;
if(m_nrx == +1) iz=348; //One RF channel, i*2 data
if(m_nrx == -1 or m_nrx == +2) iz=174; //One Rf channel, r*4 data
// or 2 RF channels, i*2 data
if(m_nrx == -2) iz=87; // Two RF channels, r*4 data
// If buffer will not overflow, move data into datcom_
if ((k+iz) <= 60*96000) {
int nsam=-1;
recvpkt_(&nsam, &b.iblk, &b.nrx, &k, b.d8, b.d8, b.d8);
if(m_bForceCenterFreq) {
datcom_.fcenter=m_dForceCenterFreq;
} else {
datcom_.fcenter=b.cfreq + m_fAdd;
}
}
m_hsym=(k-2048)*11025.0/(2048.0*m_rate);
if(m_hsym != nhsym0) {
if(m_dataSinkBusy) {
nBusy++;
} else {
m_dataSinkBusy=true;
emit readyForFFT(k); //Signal to compute new FFTs
}
nhsym0=m_hsym;
}
}
}
}
delete udpSocket;
}