mirror of
https://github.com/saitohirga/WSJT-X.git
synced 2024-09-09 06:46:39 -04:00
the JTMS of WSJT9. Modulation changed to BPSK, speed increased from 1378.125 to 2000 baud. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/jtms3@2505 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
51 lines
2.0 KiB
Plaintext
51 lines
2.0 KiB
Plaintext
JTMS v3.0: Possible New Mode for Meteor Scatter
|
|
-----------------------------------------------
|
|
|
|
1. Transmitting
|
|
|
|
Messages are sent character-by character, 6 bits plus even parity.
|
|
Message length can be one of {5 7 9 11 13 17 19 23 29}; if necessary
|
|
the message is padded with blanks to the next available length. No
|
|
other FEC is used.
|
|
|
|
Modulation is BPSK at 2000 baud. The baseband waveform is built by
|
|
inserting a tapered sinc function for each bit, then multiplying by a
|
|
sine wave at frequency f0 = 10000.0/7 = 1428.57 Hz. Agt sample rate
|
|
48000 Hz there are 24 samples per PSK symbol and 7*24=168 samples per
|
|
character. The carrier phase increment over one character is
|
|
f0*(168/48000) = 5 cycles.
|
|
|
|
2. Receiving
|
|
|
|
a. Pings are detected (or mouse-picked data is selected) as in
|
|
WSJT9.
|
|
|
|
b. Compute real-to-complex FFT. Zap birdies, remove frequency
|
|
components outside the range 300 - 2700 Hz, and convert to analytic
|
|
time-domain signal. (analytic)
|
|
|
|
c. Square the complex signal, cx2=cx*cx, and compute FFT. Look for
|
|
carrier at frequency 3000 + 2*DF +/- 2*Tol. (msdf)
|
|
|
|
d. If carrier is found, measure frequency f and phase phi. Multiply
|
|
cx by exp(-twopi*i*f*t - phi) to recover the real baseband signal
|
|
x() to within a sign ambiguity. (tweak1)
|
|
|
|
e. Apply matched filter for the Tx pulse shape to x(). This is
|
|
essentially a rectangular BPF, -1000 to +1000 Hz ? (Or convolve
|
|
with the generated PSK pulse shape, the tapered sinc() function.)
|
|
|
|
f. Establish symbol and character sync by cross-correlating with
|
|
conjg(cwb), where cwb is the baseband PSK waveform for the
|
|
<space> character.
|
|
|
|
g. Find message length by computing ACF (of what? cdat? soft
|
|
symbol values?)
|
|
|
|
h. Decode the message by cross-correlating character-length segments
|
|
of cdat against complex waveforms for each possible character.
|
|
|
|
i. If msglen is established and long enough, try folding the data and
|
|
determining best-fit characters as above.
|
|
|