mirror of
https://github.com/saitohirga/WSJT-X.git
synced 2024-11-16 17:11:53 -05:00
84 lines
4.7 KiB
Plaintext
84 lines
4.7 KiB
Plaintext
// Status=review
|
||
|
||
_WSJT-X_ is a computer program designed to facilitate basic amateur
|
||
radio communication using very weak signals. The first four letters in
|
||
the program name stand for "`**W**eak **S**ignal communication by
|
||
K1**JT**,`" while the suffix "`-X`" indicates that _WSJT-X_ started as
|
||
an e**Xt**ended and e**X**perimental branch of the program _WSJT_,
|
||
first released in 2001. Bill Somerville, G4WJS, and Steve Franke,
|
||
K9AN, have been major contributors to program development since 2013
|
||
and 2015, respectively.
|
||
|
||
_WSJT-X_ Version {VERSION_MAJOR}.{VERSION_MINOR} offers ten different
|
||
protocols or modes: *FT4*, *FT8*, *JT4*, *JT9*, *JT65*, *QRA64*,
|
||
*ISCAT*, *MSK144*, *WSPR*, and *Echo*. The first six are designed for
|
||
making reliable QSOs under weak-signal conditions. They use nearly
|
||
identical message structure and source encoding. JT65 and QRA64 were
|
||
designed for EME ("`moonbounce`") on the VHF/UHF bands and have also
|
||
proven very effective for worldwide QRP communication on the HF bands.
|
||
QRA64 has a some advantages over JT65, including better performance
|
||
for EME on the higher microwave bands. JT9 was originally designed
|
||
for the LF, MF, and lower HF bands. Its submode JT9A is 2 dB more
|
||
sensitive than JT65 while using less than 10% of the bandwidth. JT4
|
||
offers a wide variety of tone spacings and has proven highly effective
|
||
for EME on microwave bands up to 24 GHz. These four "`slow`" modes
|
||
use one-minute timed sequences of alternating transmission and
|
||
reception, so a minimal QSO takes four to six minutes — two or three
|
||
transmissions by each station, one sending in odd UTC minutes and the
|
||
other even. FT8 is operationally similar but four times faster
|
||
(15-second T/R sequences) and less sensitive by a few dB. FT4 is
|
||
faster still (7.5 s T/R sequences) and especially well suited for
|
||
radio contesting. On the HF bands, world-wide QSOs are possible with
|
||
any of these modes using power levels of a few watts (or even
|
||
milliwatts) and compromise antennas. On VHF bands and higher, QSOs
|
||
are possible (by EME and other propagation types) at signal levels 10
|
||
to 15 dB below those required for CW.
|
||
|
||
Note that even though their T/R sequences are short, FT4 and FT8 are
|
||
classified as slow modes because their message frames are sent only
|
||
once per transmission. All fast modes in _WSJT-X_ send their message
|
||
frames repeatedly, as many times as will fit into the Tx sequence
|
||
length.
|
||
|
||
*ISCAT*, *MSK144*, and optionally submodes *JT9E-H* are "`fast`"
|
||
protocols designed to take advantage of brief signal enhancements from
|
||
ionized meteor trails, aircraft scatter, and other types of scatter
|
||
propagation. These modes use timed sequences of 5, 10, 15, or 30 s
|
||
duration. User messages are transmitted repeatedly at high rate (up
|
||
to 250 characters per second, for MSK144) to make good use of the
|
||
shortest meteor-trail reflections or "`pings`". ISCAT uses free-form
|
||
messages up to 28 characters long, while MSK144 uses the same
|
||
structured messages as the slow modes and optionally an abbreviated
|
||
format with hashed callsigns.
|
||
|
||
*WSPR* (pronounced "`whisper`") stands for **W**eak **S**ignal
|
||
**P**ropagation **R**eporter. The WSPR protocol was designed for probing
|
||
potential propagation paths using low-power transmissions. WSPR
|
||
messages normally carry the transmitting station’s callsign, grid
|
||
locator, and transmitter power in dBm, and they can be decoded at
|
||
signal-to-noise ratios as low as -31 dB in a 2500 Hz bandwidth. WSPR
|
||
users with internet access can automatically upload reception
|
||
reports to a central database called {wsprnet} that provides a mapping
|
||
facility, archival storage, and many other features.
|
||
|
||
*Echo* mode allows you to detect and measure your own station's echoes
|
||
from the moon, even if they are far below the audible threshold.
|
||
|
||
_WSJT-X_ provides spectral displays for receiver passbands as wide as
|
||
5 kHz, flexible rig control for nearly all modern radios used by
|
||
amateurs, and a wide variety of special aids such as automatic Doppler
|
||
tracking for EME QSOs and Echo testing. The program runs equally well
|
||
on Windows, Macintosh, and Linux systems, and installation packages
|
||
are available for all three platforms.
|
||
|
||
*Version Numbers:* _WSJT-X_ release numbers have major, minor, and
|
||
patch numbers separated by periods: for example, _WSJT-X_ Version
|
||
2.1.0. Temporary _beta release_ candidates are sometimes made in
|
||
advance of a new general-availability release, in order to obtain user
|
||
feedback. For example, version 2.1.0-rc1, 2.1.0-rc2, etc., would
|
||
be beta releases leading up to the final release of v2.1.0.
|
||
Release candidates should be used _only_ during a short testing
|
||
period. They carry an implied obligation to provide feedback to the
|
||
program development group. Candidate releases should not be used on
|
||
the air after a full release with the same number has been made.
|