WSJT-X/lib/q65_decode.f90

163 lines
5.3 KiB
Fortran

module q65_decode
type :: q65_decoder
procedure(q65_decode_callback), pointer :: callback
contains
procedure :: decode
end type q65_decoder
abstract interface
subroutine q65_decode_callback (this,nutc,sync,nsnr,dt,freq, &
decoded,nap,qual,ntrperiod,fmid,w50)
import q65_decoder
implicit none
class(q65_decoder), intent(inout) :: this
integer, intent(in) :: nutc
real, intent(in) :: sync
integer, intent(in) :: nsnr
real, intent(in) :: dt
real, intent(in) :: freq
character(len=37), intent(in) :: decoded
integer, intent(in) :: nap
real, intent(in) :: qual
integer, intent(in) :: ntrperiod
real, intent(in) :: fmid
real, intent(in) :: w50
end subroutine q65_decode_callback
end interface
contains
subroutine decode(this,callback,iwave,nutc,ntrperiod,nsubmode,nfqso, &
ntol,ndepth,mycall,hiscall,hisgrid)
! Decodes Q65 signals
! Input: iwave Raw data, i*2
! nutc UTC for time-tagging the decode
! ntrperiod T/R sequence length (s)
! nsubmode Tone-spacing indicator, 0-4 for A-E
! nfqso Target signal frequency (Hz)
! ntol Search range around nfqso (Hz)
! ndepth Optional decoding level (???)
! Output: sent to the callback routine for display to user
use timer_module, only: timer
use packjt
use, intrinsic :: iso_c_binding
parameter (NMAX=300*12000) !Max TRperiod is 300 s
class(q65_decoder), intent(inout) :: this
procedure(q65_decode_callback) :: callback
character(len=12) :: mycall, hiscall !Used for AP decoding
character(len=6) :: hisgrid
character*37 decoded !Decoded message
integer*2 iwave(NMAX) !Raw data
real, allocatable :: dd(:) !Raw data
integer dat4(12) !Decoded message as 12 6-bit integers
logical ltext
complex, allocatable :: c00(:) !Analytic signal, 6000 Sa/s
complex, allocatable :: c0(:) !Analytic signal, 6000 Sa/s
data nc1z/-1/,nc2z/-1/,ng2z/-1/,maxaptypez/-1/,nsubmodez/-1/
save nc1z,nc2z,ng2z,maxaptypez,nsubmodez
mode65=2**nsubmode
nfft1=ntrperiod*12000
nfft2=ntrperiod*6000
allocate(dd(NMAX))
allocate (c00(0:nfft1-1))
allocate (c0(0:nfft1-1))
if(ntrperiod.eq.15) then
nsps=1800
else if(ntrperiod.eq.30) then
nsps=3600
else if(ntrperiod.eq.60) then
nsps=7200
else if(ntrperiod.eq.120) then
nsps=16000
else if(ntrperiod.eq.300) then
nsps=41472
else
stop 'Invalid TR period'
endif
npts=ntrperiod*12000
baud=12000.0/nsps
df1=12000.0/nfft1
this%callback => callback
if(nutc.eq.-999) print*,lapdx,nfa,nfb,nfqso !Silence warning
! Prime the QRA decoder for possible use of AP
call packcall(mycall(1:6),nc1,ltext)
call packcall(hiscall(1:6),nc2,ltext)
call packgrid(hisgrid(1:4),ng2,ltext)
b90=20.0 !8 to 25 is OK; not very critical
nFadingModel=1
! AP control could be done differently, but this works well:
maxaptype=0
! if(ndepth.eq.2) maxaptype=3
! if(ndepth.eq.3) maxaptype=5
if(ndepth.ge.2) maxaptype=5 !###
minsync=-2
call qra_params(ndepth,maxaptype,idfmax,idtmax,ibwmin,ibwmax,maxdist)
if(nc1.ne.nc1z .or. nc2.ne.nc2z .or. ng2.ne.ng2z .or. &
maxaptype.ne.maxaptypez) then
do naptype=0,maxaptype
if(naptype.eq.2 .and. maxaptype.eq.4) cycle
call qra64_dec(s3dummy,nc1,nc2,ng2,naptype,1,nSubmode,b90, &
nFadingModel,dat4,snr2,irc)
enddo
nc1z=nc1
nc2z=nc2
ng2z=ng2
maxaptypez=maxaptype
endif
naptype=maxaptype
call timer('sync_q65',0)
call sync_q65(iwave,ntrperiod*12000,mode65,nsps,nfqso,ntol,xdt,f0,snr1)
call timer('sync_q65',1)
irc=-1
if(snr1.ge.2.5) then
jpk0=(xdt+1.0)*6000 !###
if(ntrperiod.le.30) jpk0=(xdt+0.5)*6000 !###
if(jpk0.lt.0) jpk0=0
fac=1.0/32767.0
dd=fac*iwave
nmode=65
call ana64(dd,npts,c00)
call timer('qraloops',0)
call qra_loops(c00,npts/2,nsps/2,nmode,mode65,nsubmode,nFadingModel, &
ndepth,nc1,nc2,ng2,naptype,jpk0,xdt,f0,width,snr2,irc,dat4)
call timer('qraloops',1)
snr2=snr2 + db(6912.0/nsps)
endif
decoded=' '
if(irc.ge.0) then
call unpackmsg(dat4,decoded) !Unpack the user message
call fmtmsg(decoded,iz)
if(index(decoded,"000AAA ").ge.1) then
! Suppress a certain type of garbage decode.
decoded=' '
irc=-1
endif
nsnr=nint(snr2)
call this%callback(nutc,sync,nsnr,xdt,f0,decoded, &
irc,qual,ntrperiod,fmid,w50)
else
nsnr=db(snr1) - 32.0
!### TEMPORARY? ###
call this%callback(nutc,sync,nsnr,xdt,f0,decoded, &
irc,qual,ntrperiod,fmid,w50)
!###
endif
! write(61,3061) nutc,irc,xdt,f0,snr1,snr2,trim(decoded)
!3061 format(i6.6,i4,4f10.2,2x,a)
return
end subroutine decode
end module q65_decode