WSJT-X/Configuration.cpp
Bill Somerville 19c46774b4
Moving toward multiplier and dupe detection for contest modes
There's not  much to show  for this so far  but some of  the necessary
infrastructure is in place.
2019-05-30 22:20:09 +01:00

2977 lines
117 KiB
C++

#include "Configuration.hpp"
//
// Read me!
//
// This file defines a configuration dialog with the user. The general
// strategy is to expose agreed configuration parameters via a custom
// interface (See Configuration.hpp). The state exposed through this
// public interface reflects stored or derived data in the
// Configuration::impl object. The Configuration::impl structure is
// an implementation of the PIMPL (a.k.a. Cheshire Cat or compilation
// firewall) implementation hiding idiom that allows internal state to
// be completely removed from the public interface.
//
// There is a secondary level of parameter storage which reflects
// current settings UI state, these parameters are not copied to the
// state store that the public interface exposes until the
// Configuration:impl::accept() operation is successful. The accept()
// operation is tied to the settings OK button. The normal and most
// convenient place to store this intermediate settings UI state is in
// the data models of the UI controls, if that is not convenient then
// separate member variables must be used to store that state. It is
// important for the user experience that no publicly visible settings
// are changed while the settings UI are changed i.e. all settings
// changes must be deferred until the "OK" button is
// clicked. Conversely, all changes must be discarded if the settings
// UI "Cancel" button is clicked.
//
// There is a complication related to the radio interface since the
// this module offers the facility to test the radio interface. This
// test means that the public visibility to the radio being tested
// must be changed. To maintain the illusion of deferring changes
// until they are accepted, the original radio related settings are
// stored upon showing the UI and restored if the UI is dismissed by
// canceling.
//
// It should be noted that the settings UI lives as long as the
// application client that uses it does. It is simply shown and hidden
// as it is needed rather than creating it on demand. This strategy
// saves a lot of expensive UI drawing at the expense of a little
// storage and gives a convenient place to deliver settings values
// from.
//
// Here is an overview of the high level flow of this module:
//
// 1) On construction the initial environment is initialized and
// initial values for settings are read from the QSettings
// database. At this point default values for any new settings are
// established by providing a default value to the QSettings value
// queries. This should be the only place where a hard coded value for
// a settings item is defined. Any remaining one-time UI
// initialization is also done. At the end of the constructor a method
// initialize_models() is called to load the UI with the current
// settings values.
//
// 2) When the settings UI is displayed by a client calling the exec()
// operation, only temporary state need be stored as the UI state will
// already mirror the publicly visible settings state.
//
// 3) As the user makes changes to the settings UI only validation
// need be carried out since the UI control data models are used as
// the temporary store of unconfirmed settings. As some settings will
// depend on each other a validate() operation is available, this
// operation implements a check of any complex multi-field values.
//
// 4) If the user discards the settings changes by dismissing the UI
// with the "Cancel" button; the reject() operation is called. The
// reject() operation calls initialize_models() which will revert all
// the UI visible state to the values as at the initial exec()
// operation. No changes are moved into the data fields in
// Configuration::impl that reflect the settings state published by
// the public interface (Configuration.hpp).
//
// 5) If the user accepts the settings changes by dismissing the UI
// with the "OK" button; the accept() operation is called which calls
// the validate() operation again and, if it passes, the fields that
// are used to deliver the settings state are updated from the UI
// control models or other temporary state variables. At the end of
// the accept() operation, just before hiding the UI and returning
// control to the caller; the new settings values are stored into the
// settings database by a call to the write_settings() operation, thus
// ensuring that settings changes are saved even if the application
// crashes or is subsequently killed.
//
// 6) On destruction, which only happens when the application
// terminates, the settings are saved to the settings database by
// calling the write_settings() operation. This is largely redundant
// but is still done to save the default values of any new settings on
// an initial run.
//
// To add a new setting:
//
// 1) Update the UI with the new widget to view and change the value.
//
// 2) Add a member to Configuration::impl to store the accepted
// setting state. If the setting state is dynamic; add a new signal to
// broadcast the setting value.
//
// 3) Add a query method to the public interface (Configuration.hpp)
// to access the new setting value. If the settings is dynamic; this
// step is optional since value changes will be broadcast via a
// signal.
//
// 4) Add a forwarding operation to implement the new query (3) above.
//
// 5) Add a settings read call to read_settings() with a sensible
// default value. If the setting value is dynamic, add a signal emit
// call to broadcast the setting value change.
//
// 6) Add code to initialize_models() to load the widget control's
// data model with the current value.
//
// 7) If there is no convenient data model field, add a data member to
// store the proposed new value. Ensure this member has a valid value
// on exit from read_settings().
//
// 8) Add any required inter-field validation to the validate()
// operation.
//
// 9) Add code to the accept() operation to extract the setting value
// from the widget control data model and load it into the
// Configuration::impl member that reflects the publicly visible
// setting state. If the setting value is dynamic; add a signal emit
// call to broadcast any changed state of the setting.
//
// 10) Add a settings write call to save the setting value to the
// settings database.
//
#include <stdexcept>
#include <iterator>
#include <algorithm>
#include <functional>
#include <limits>
#include <cmath>
#include <QApplication>
#include <QMetaType>
#include <QList>
#include <QSettings>
#include <QAudioDeviceInfo>
#include <QAudioInput>
#include <QDialog>
#include <QAction>
#include <QFileDialog>
#include <QDir>
#include <QTemporaryFile>
#include <QFormLayout>
#include <QString>
#include <QStringList>
#include <QStringListModel>
#include <QLineEdit>
#include <QRegularExpression>
#include <QRegularExpressionValidator>
#include <QIntValidator>
#include <QThread>
#include <QTimer>
#include <QStandardPaths>
#include <QFont>
#include <QFontDialog>
#include <QSerialPortInfo>
#include <QScopedPointer>
#include <QDebug>
#include "pimpl_impl.hpp"
#include "qt_helpers.hpp"
#include "MetaDataRegistry.hpp"
#include "SettingsGroup.hpp"
#include "widgets/FrequencyLineEdit.hpp"
#include "widgets/FrequencyDeltaLineEdit.hpp"
#include "item_delegates/CandidateKeyFilter.hpp"
#include "item_delegates/ForeignKeyDelegate.hpp"
#include "item_delegates/FrequencyDelegate.hpp"
#include "item_delegates/FrequencyDeltaDelegate.hpp"
#include "TransceiverFactory.hpp"
#include "Transceiver.hpp"
#include "models/Bands.hpp"
#include "models/IARURegions.hpp"
#include "models/Modes.hpp"
#include "models/FrequencyList.hpp"
#include "models/StationList.hpp"
#include "NetworkServerLookup.hpp"
#include "widgets/MessageBox.hpp"
#include "validators/MaidenheadLocatorValidator.hpp"
#include "validators/CallsignValidator.hpp"
#include "LotWUsers.hpp"
#include "models/DecodeHighlightingModel.hpp"
#include "logbook/logbook.h"
#include "ui_Configuration.h"
#include "moc_Configuration.cpp"
namespace
{
// these undocumented flag values when stored in (Qt::UserRole - 1)
// of a ComboBox item model index allow the item to be enabled or
// disabled
int const combo_box_item_enabled (32 | 1);
int const combo_box_item_disabled (0);
// QRegExp message_alphabet {"[- A-Za-z0-9+./?]*"};
QRegularExpression message_alphabet {"[- @A-Za-z0-9+./?#<>]*"};
QRegularExpression RTTY_roundup_exchange_re {
R"(
(
AL|AZ|AR|CA|CO|CT|DE|FL|GA # 48 contiguous states
|ID|IL|IN|IA|KS|KY|LA|ME|MD
|MA|MI|MN|MS|MO|MT|NE|NV|NH|NJ
|NM|NY|NC|ND|OH|OK|OR|PA|RI|SC
|SD|TN|TX|UT|VT|VA|WA|WV|WI|WY
|NB|NS|QC|ON|MB|SK|AB|BC|NWT|NF # VE provinces
|LB|NU|YT|PEI
|DC # District of Columbia
|DX # anyone else
|SCC # Slovenia Contest Club contest
)
)", QRegularExpression::CaseInsensitiveOption | QRegularExpression::ExtendedPatternSyntaxOption};
QRegularExpression field_day_exchange_re {
R"(
(
[1-9] # # transmitters (1 to 32 inc.)
|[0-2]\d
|3[0-2]
)
[A-F]\ * # class and optional space
(
AB|AK|AL|AR|AZ|BC|CO|CT|DE|EB # ARRL/RAC section
|EMA|ENY|EPA|EWA|GA|GTA|IA|ID
|IL|IN|KS|KY|LA|LAX|MAR|MB|MDC
|ME|MI|MN|MO|MS|MT|NC|ND|NE|NFL
|NH|NL|NLI|NM|NNJ|NNY|NT|NTX|NV
|OH|OK|ONE|ONN|ONS|OR|ORG|PAC
|PR|QC|RI|SB|SC|SCV|SD|SDG|SF
|SFL|SJV|SK|SNJ|STX|SV|TN|UT|VA
|VI|VT|WCF|WI|WMA|WNY|WPA|WTX
|WV|WWA|WY
|DX # anyone else
)
)", QRegularExpression::CaseInsensitiveOption | QRegularExpression::ExtendedPatternSyntaxOption};
// Magic numbers for file validation
constexpr quint32 qrg_magic {0xadbccbdb};
constexpr quint32 qrg_version {100}; // M.mm
}
//
// Dialog to get a new Frequency item
//
class FrequencyDialog final
: public QDialog
{
public:
using Item = FrequencyList_v2::Item;
explicit FrequencyDialog (IARURegions * regions_model, Modes * modes_model, QWidget * parent = nullptr)
: QDialog {parent}
{
setWindowTitle (QApplication::applicationName () + " - " +
tr ("Add Frequency"));
region_combo_box_.setModel (regions_model);
mode_combo_box_.setModel (modes_model);
auto form_layout = new QFormLayout ();
form_layout->addRow (tr ("IARU &Region:"), &region_combo_box_);
form_layout->addRow (tr ("&Mode:"), &mode_combo_box_);
form_layout->addRow (tr ("&Frequency (MHz):"), &frequency_line_edit_);
auto main_layout = new QVBoxLayout (this);
main_layout->addLayout (form_layout);
auto button_box = new QDialogButtonBox {QDialogButtonBox::Ok | QDialogButtonBox::Cancel};
main_layout->addWidget (button_box);
connect (button_box, &QDialogButtonBox::accepted, this, &FrequencyDialog::accept);
connect (button_box, &QDialogButtonBox::rejected, this, &FrequencyDialog::reject);
}
Item item () const
{
return {frequency_line_edit_.frequency ()
, Modes::value (mode_combo_box_.currentText ())
, IARURegions::value (region_combo_box_.currentText ())};
}
private:
QComboBox region_combo_box_;
QComboBox mode_combo_box_;
FrequencyLineEdit frequency_line_edit_;
};
//
// Dialog to get a new Station item
//
class StationDialog final
: public QDialog
{
public:
explicit StationDialog (StationList const * stations, Bands * bands, QWidget * parent = nullptr)
: QDialog {parent}
, filtered_bands_ {new CandidateKeyFilter {bands, stations, 0, 0}}
{
setWindowTitle (QApplication::applicationName () + " - " + tr ("Add Station"));
band_.setModel (filtered_bands_.data ());
auto form_layout = new QFormLayout ();
form_layout->addRow (tr ("&Band:"), &band_);
form_layout->addRow (tr ("&Offset (MHz):"), &delta_);
form_layout->addRow (tr ("&Antenna:"), &description_);
auto main_layout = new QVBoxLayout (this);
main_layout->addLayout (form_layout);
auto button_box = new QDialogButtonBox {QDialogButtonBox::Ok | QDialogButtonBox::Cancel};
main_layout->addWidget (button_box);
connect (button_box, &QDialogButtonBox::accepted, this, &StationDialog::accept);
connect (button_box, &QDialogButtonBox::rejected, this, &StationDialog::reject);
if (delta_.text ().isEmpty ())
{
delta_.setText ("0");
}
}
StationList::Station station () const
{
return {band_.currentText (), delta_.frequency_delta (), description_.text ()};
}
int exec () override
{
filtered_bands_->set_active_key ();
return QDialog::exec ();
}
private:
QScopedPointer<CandidateKeyFilter> filtered_bands_;
QComboBox band_;
FrequencyDeltaLineEdit delta_;
QLineEdit description_;
};
class RearrangableMacrosModel
: public QStringListModel
{
public:
Qt::ItemFlags flags (QModelIndex const& index) const override
{
auto flags = QStringListModel::flags (index);
if (index.isValid ())
{
// disallow drop onto existing items
flags &= ~Qt::ItemIsDropEnabled;
}
return flags;
}
};
//
// Class MessageItemDelegate
//
// Item delegate for message entry such as free text message macros.
//
class MessageItemDelegate final
: public QStyledItemDelegate
{
public:
explicit MessageItemDelegate (QObject * parent = nullptr)
: QStyledItemDelegate {parent}
{
}
QWidget * createEditor (QWidget * parent
, QStyleOptionViewItem const& /* option*/
, QModelIndex const& /* index */
) const override
{
auto editor = new QLineEdit {parent};
editor->setFrame (false);
editor->setValidator (new QRegularExpressionValidator {message_alphabet, editor});
return editor;
}
};
// Internal implementation of the Configuration class.
class Configuration::impl final
: public QDialog
{
Q_OBJECT;
public:
using FrequencyDelta = Radio::FrequencyDelta;
using port_type = Configuration::port_type;
explicit impl (Configuration * self
, QNetworkAccessManager * network_manager
, QDir const& temp_directory
, QSettings * settings
, LogBook * logbook
, QWidget * parent);
~impl ();
bool have_rig ();
void transceiver_frequency (Frequency);
void transceiver_tx_frequency (Frequency);
void transceiver_mode (MODE);
void transceiver_ptt (bool);
void sync_transceiver (bool force_signal);
Q_SLOT int exec () override;
Q_SLOT void accept () override;
Q_SLOT void reject () override;
Q_SLOT void done (int) override;
private:
typedef QList<QAudioDeviceInfo> AudioDevices;
void read_settings ();
void write_settings ();
bool load_audio_devices (QAudio::Mode, QComboBox *, QAudioDeviceInfo *);
void update_audio_channels (QComboBox const *, int, QComboBox *, bool);
void initialize_models ();
bool split_mode () const
{
return
(WSJT_RIG_NONE_CAN_SPLIT || !rig_is_dummy_) &&
(rig_params_.split_mode != TransceiverFactory::split_mode_none);
}
void set_cached_mode ();
bool open_rig (bool force = false);
//bool set_mode ();
void close_rig ();
TransceiverFactory::ParameterPack gather_rig_data ();
void enumerate_rigs ();
void set_rig_invariants ();
bool validate ();
void fill_port_combo_box (QComboBox *);
Frequency apply_calibration (Frequency) const;
Frequency remove_calibration (Frequency) const;
void delete_frequencies ();
void load_frequencies ();
void merge_frequencies ();
void save_frequencies ();
void reset_frequencies ();
void insert_frequency ();
FrequencyList_v2::FrequencyItems read_frequencies_file (QString const&);
void delete_stations ();
void insert_station ();
Q_SLOT void on_font_push_button_clicked ();
Q_SLOT void on_decoded_text_font_push_button_clicked ();
Q_SLOT void on_PTT_port_combo_box_activated (int);
Q_SLOT void on_CAT_port_combo_box_activated (int);
Q_SLOT void on_CAT_serial_baud_combo_box_currentIndexChanged (int);
Q_SLOT void on_CAT_data_bits_button_group_buttonClicked (int);
Q_SLOT void on_CAT_stop_bits_button_group_buttonClicked (int);
Q_SLOT void on_CAT_handshake_button_group_buttonClicked (int);
Q_SLOT void on_CAT_poll_interval_spin_box_valueChanged (int);
Q_SLOT void on_split_mode_button_group_buttonClicked (int);
Q_SLOT void on_test_CAT_push_button_clicked ();
Q_SLOT void on_test_PTT_push_button_clicked (bool checked);
Q_SLOT void on_force_DTR_combo_box_currentIndexChanged (int);
Q_SLOT void on_force_RTS_combo_box_currentIndexChanged (int);
Q_SLOT void on_rig_combo_box_currentIndexChanged (int);
Q_SLOT void on_sound_input_combo_box_currentTextChanged (QString const&);
Q_SLOT void on_sound_output_combo_box_currentTextChanged (QString const&);
Q_SLOT void on_add_macro_push_button_clicked (bool = false);
Q_SLOT void on_delete_macro_push_button_clicked (bool = false);
Q_SLOT void on_PTT_method_button_group_buttonClicked (int);
Q_SLOT void on_add_macro_line_edit_editingFinished ();
Q_SLOT void delete_macro ();
void delete_selected_macros (QModelIndexList);
Q_SLOT void on_save_path_select_push_button_clicked (bool);
Q_SLOT void on_azel_path_select_push_button_clicked (bool);
Q_SLOT void on_calibration_intercept_spin_box_valueChanged (double);
Q_SLOT void on_calibration_slope_ppm_spin_box_valueChanged (double);
Q_SLOT void handle_transceiver_update (TransceiverState const&, unsigned sequence_number);
Q_SLOT void handle_transceiver_failure (QString const& reason);
Q_SLOT void on_reset_highlighting_to_defaults_push_button_clicked (bool);
Q_SLOT void on_rescan_log_push_button_clicked (bool);
Q_SLOT void on_LotW_CSV_fetch_push_button_clicked (bool);
Q_SLOT void on_cbx2ToneSpacing_clicked(bool);
Q_SLOT void on_cbx4ToneSpacing_clicked(bool);
Q_SLOT void on_prompt_to_log_check_box_clicked(bool);
Q_SLOT void on_cbAutoLog_clicked(bool);
Q_SLOT void on_Field_Day_Exchange_textEdited (QString const&);
Q_SLOT void on_RTTY_Exchange_textEdited (QString const&);
// typenames used as arguments must match registered type names :(
Q_SIGNAL void start_transceiver (unsigned seqeunce_number) const;
Q_SIGNAL void set_transceiver (Transceiver::TransceiverState const&,
unsigned sequence_number) const;
Q_SIGNAL void stop_transceiver () const;
Configuration * const self_; // back pointer to public interface
QThread * transceiver_thread_;
TransceiverFactory transceiver_factory_;
QList<QMetaObject::Connection> rig_connections_;
QScopedPointer<Ui::configuration_dialog> ui_;
QNetworkAccessManager * network_manager_;
QSettings * settings_;
LogBook * logbook_;
QDir doc_dir_;
QDir data_dir_;
QDir temp_dir_;
QDir writeable_data_dir_;
QDir default_save_directory_;
QDir save_directory_;
QDir default_azel_directory_;
QDir azel_directory_;
QFont font_;
QFont next_font_;
QFont decoded_text_font_;
QFont next_decoded_text_font_;
LotWUsers lotw_users_;
bool restart_sound_input_device_;
bool restart_sound_output_device_;
Type2MsgGen type_2_msg_gen_;
QStringListModel macros_;
RearrangableMacrosModel next_macros_;
QAction * macro_delete_action_;
Bands bands_;
IARURegions regions_;
IARURegions::Region region_;
Modes modes_;
FrequencyList_v2 frequencies_;
FrequencyList_v2 next_frequencies_;
StationList stations_;
StationList next_stations_;
FrequencyDelta current_offset_;
FrequencyDelta current_tx_offset_;
QAction * frequency_delete_action_;
QAction * frequency_insert_action_;
QAction * load_frequencies_action_;
QAction * save_frequencies_action_;
QAction * merge_frequencies_action_;
QAction * reset_frequencies_action_;
FrequencyDialog * frequency_dialog_;
QAction station_delete_action_;
QAction station_insert_action_;
StationDialog * station_dialog_;
DecodeHighlightingModel decode_highlighing_model_;
DecodeHighlightingModel next_decode_highlighing_model_;
bool highlight_by_mode_;
bool include_WAE_entities_;
int LotW_days_since_upload_;
TransceiverFactory::ParameterPack rig_params_;
TransceiverFactory::ParameterPack saved_rig_params_;
TransceiverFactory::Capabilities::PortType last_port_type_;
bool rig_is_dummy_;
bool rig_active_;
bool have_rig_;
bool rig_changed_;
TransceiverState cached_rig_state_;
int rig_resolution_; // see Transceiver::resolution signal
CalibrationParams calibration_;
bool frequency_calibration_disabled_; // not persistent
unsigned transceiver_command_number_;
QString dynamic_grid_;
// configuration fields that we publish
QString my_callsign_;
QString my_grid_;
QString FD_exchange_;
QString RTTY_exchange_;
qint32 id_interval_;
qint32 ntrials_;
qint32 aggressive_;
qint32 RxBandwidth_;
double degrade_;
double txDelay_;
bool id_after_73_;
bool tx_QSY_allowed_;
bool spot_to_psk_reporter_;
bool monitor_off_at_startup_;
bool monitor_last_used_;
bool log_as_RTTY_;
bool report_in_comments_;
bool prompt_to_log_;
bool autoLog_;
bool decodes_from_top_;
bool insert_blank_;
bool DXCC_;
bool ppfx_;
bool clear_DX_;
bool miles_;
bool quick_call_;
bool disable_TX_on_73_;
bool force_call_1st_;
bool alternate_bindings_;
int watchdog_;
bool TX_messages_;
bool enable_VHF_features_;
bool decode_at_52s_;
bool single_decode_;
bool twoPass_;
bool bSpecialOp_;
int SelectedActivity_;
bool x2ToneSpacing_;
bool x4ToneSpacing_;
bool use_dynamic_grid_;
QString opCall_;
QString udp_server_name_;
port_type udp_server_port_;
QString n1mm_server_name_;
port_type n1mm_server_port_;
bool broadcast_to_n1mm_;
bool accept_udp_requests_;
bool udpWindowToFront_;
bool udpWindowRestore_;
DataMode data_mode_;
bool bLowSidelobes_;
bool pwrBandTxMemory_;
bool pwrBandTuneMemory_;
QAudioDeviceInfo audio_input_device_;
bool default_audio_input_device_selected_;
AudioDevice::Channel audio_input_channel_;
QAudioDeviceInfo audio_output_device_;
bool default_audio_output_device_selected_;
AudioDevice::Channel audio_output_channel_;
friend class Configuration;
};
#include "Configuration.moc"
// delegate to implementation class
Configuration::Configuration (QNetworkAccessManager * network_manager, QDir const& temp_directory,
QSettings * settings, LogBook * logbook, QWidget * parent)
: m_ {this, network_manager, temp_directory, settings, logbook, parent}
{
}
Configuration::~Configuration ()
{
}
QDir Configuration::doc_dir () const {return m_->doc_dir_;}
QDir Configuration::data_dir () const {return m_->data_dir_;}
QDir Configuration::writeable_data_dir () const {return m_->writeable_data_dir_;}
QDir Configuration::temp_dir () const {return m_->temp_dir_;}
void Configuration::select_tab (int index) {m_->ui_->configuration_tabs->setCurrentIndex (index);}
int Configuration::exec () {return m_->exec ();}
bool Configuration::is_active () const {return m_->isVisible ();}
QAudioDeviceInfo const& Configuration::audio_input_device () const {return m_->audio_input_device_;}
AudioDevice::Channel Configuration::audio_input_channel () const {return m_->audio_input_channel_;}
QAudioDeviceInfo const& Configuration::audio_output_device () const {return m_->audio_output_device_;}
AudioDevice::Channel Configuration::audio_output_channel () const {return m_->audio_output_channel_;}
bool Configuration::restart_audio_input () const {return m_->restart_sound_input_device_;}
bool Configuration::restart_audio_output () const {return m_->restart_sound_output_device_;}
auto Configuration::type_2_msg_gen () const -> Type2MsgGen {return m_->type_2_msg_gen_;}
QString Configuration::my_callsign () const {return m_->my_callsign_;}
QFont Configuration::text_font () const {return m_->font_;}
QFont Configuration::decoded_text_font () const {return m_->decoded_text_font_;}
qint32 Configuration::id_interval () const {return m_->id_interval_;}
qint32 Configuration::ntrials() const {return m_->ntrials_;}
qint32 Configuration::aggressive() const {return m_->aggressive_;}
double Configuration::degrade() const {return m_->degrade_;}
double Configuration::txDelay() const {return m_->txDelay_;}
qint32 Configuration::RxBandwidth() const {return m_->RxBandwidth_;}
bool Configuration::id_after_73 () const {return m_->id_after_73_;}
bool Configuration::tx_QSY_allowed () const {return m_->tx_QSY_allowed_;}
bool Configuration::spot_to_psk_reporter () const
{
// rig must be open and working to spot externally
return is_transceiver_online () && m_->spot_to_psk_reporter_;
}
bool Configuration::monitor_off_at_startup () const {return m_->monitor_off_at_startup_;}
bool Configuration::monitor_last_used () const {return m_->rig_is_dummy_ || m_->monitor_last_used_;}
bool Configuration::log_as_RTTY () const {return m_->log_as_RTTY_;}
bool Configuration::report_in_comments () const {return m_->report_in_comments_;}
bool Configuration::prompt_to_log () const {return m_->prompt_to_log_;}
bool Configuration::autoLog() const {return m_->autoLog_;}
bool Configuration::decodes_from_top () const {return m_->decodes_from_top_;}
bool Configuration::insert_blank () const {return m_->insert_blank_;}
bool Configuration::DXCC () const {return m_->DXCC_;}
bool Configuration::ppfx() const {return m_->ppfx_;}
bool Configuration::clear_DX () const {return m_->clear_DX_;}
bool Configuration::miles () const {return m_->miles_;}
bool Configuration::quick_call () const {return m_->quick_call_;}
bool Configuration::disable_TX_on_73 () const {return m_->disable_TX_on_73_;}
bool Configuration::force_call_1st() const {return m_->force_call_1st_;}
bool Configuration::alternate_bindings() const {return m_->alternate_bindings_;}
int Configuration::watchdog () const {return m_->watchdog_;}
bool Configuration::TX_messages () const {return m_->TX_messages_;}
bool Configuration::enable_VHF_features () const {return m_->enable_VHF_features_;}
bool Configuration::decode_at_52s () const {return m_->decode_at_52s_;}
bool Configuration::single_decode () const {return m_->single_decode_;}
bool Configuration::twoPass() const {return m_->twoPass_;}
bool Configuration::x2ToneSpacing() const {return m_->x2ToneSpacing_;}
bool Configuration::x4ToneSpacing() const {return m_->x4ToneSpacing_;}
bool Configuration::split_mode () const {return m_->split_mode ();}
QString Configuration::opCall() const {return m_->opCall_;}
void Configuration::opCall (QString const& call) {m_->opCall_ = call;}
QString Configuration::udp_server_name () const {return m_->udp_server_name_;}
auto Configuration::udp_server_port () const -> port_type {return m_->udp_server_port_;}
bool Configuration::accept_udp_requests () const {return m_->accept_udp_requests_;}
QString Configuration::n1mm_server_name () const {return m_->n1mm_server_name_;}
auto Configuration::n1mm_server_port () const -> port_type {return m_->n1mm_server_port_;}
bool Configuration::broadcast_to_n1mm () const {return m_->broadcast_to_n1mm_;}
bool Configuration::lowSidelobes() const {return m_->bLowSidelobes_;}
bool Configuration::udpWindowToFront () const {return m_->udpWindowToFront_;}
bool Configuration::udpWindowRestore () const {return m_->udpWindowRestore_;}
Bands * Configuration::bands () {return &m_->bands_;}
Bands const * Configuration::bands () const {return &m_->bands_;}
StationList * Configuration::stations () {return &m_->stations_;}
StationList const * Configuration::stations () const {return &m_->stations_;}
IARURegions::Region Configuration::region () const {return m_->region_;}
FrequencyList_v2 * Configuration::frequencies () {return &m_->frequencies_;}
FrequencyList_v2 const * Configuration::frequencies () const {return &m_->frequencies_;}
QStringListModel * Configuration::macros () {return &m_->macros_;}
QStringListModel const * Configuration::macros () const {return &m_->macros_;}
QDir Configuration::save_directory () const {return m_->save_directory_;}
QDir Configuration::azel_directory () const {return m_->azel_directory_;}
QString Configuration::rig_name () const {return m_->rig_params_.rig_name;}
bool Configuration::pwrBandTxMemory () const {return m_->pwrBandTxMemory_;}
bool Configuration::pwrBandTuneMemory () const {return m_->pwrBandTuneMemory_;}
LotWUsers const& Configuration::lotw_users () const {return m_->lotw_users_;}
DecodeHighlightingModel const& Configuration::decode_highlighting () const {return m_->decode_highlighing_model_;}
bool Configuration::highlight_by_mode () const {return m_->highlight_by_mode_;}
bool Configuration::include_WAE_entities () const {return m_->include_WAE_entities_;}
void Configuration::set_calibration (CalibrationParams params)
{
m_->calibration_ = params;
}
void Configuration::enable_calibration (bool on)
{
auto target_frequency = m_->remove_calibration (m_->cached_rig_state_.frequency ()) - m_->current_offset_;
m_->frequency_calibration_disabled_ = !on;
transceiver_frequency (target_frequency);
}
bool Configuration::is_transceiver_online () const
{
return m_->rig_active_;
}
bool Configuration::is_dummy_rig () const
{
return m_->rig_is_dummy_;
}
bool Configuration::transceiver_online ()
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_online: " << m_->cached_rig_state_;
#endif
return m_->have_rig ();
}
int Configuration::transceiver_resolution () const
{
return m_->rig_resolution_;
}
void Configuration::transceiver_offline ()
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_offline:" << m_->cached_rig_state_;
#endif
m_->close_rig ();
}
void Configuration::transceiver_frequency (Frequency f)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_frequency:" << f << m_->cached_rig_state_;
#endif
m_->transceiver_frequency (f);
}
void Configuration::transceiver_tx_frequency (Frequency f)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_tx_frequency:" << f << m_->cached_rig_state_;
#endif
m_->transceiver_tx_frequency (f);
}
void Configuration::transceiver_mode (MODE mode)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_mode:" << mode << m_->cached_rig_state_;
#endif
m_->transceiver_mode (mode);
}
void Configuration::transceiver_ptt (bool on)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::transceiver_ptt:" << on << m_->cached_rig_state_;
#endif
m_->transceiver_ptt (on);
}
void Configuration::sync_transceiver (bool force_signal, bool enforce_mode_and_split)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::sync_transceiver: force signal:" << force_signal << "enforce_mode_and_split:" << enforce_mode_and_split << m_->cached_rig_state_;
#endif
m_->sync_transceiver (force_signal);
if (!enforce_mode_and_split)
{
m_->transceiver_tx_frequency (0);
}
}
bool Configuration::valid_n1mm_info () const
{
// do very rudimentary checking on the n1mm server name and port number.
//
auto server_name = m_->n1mm_server_name_;
auto port_number = m_->n1mm_server_port_;
return(!(server_name.trimmed().isEmpty() || port_number == 0));
}
QString Configuration::my_grid() const
{
auto the_grid = m_->my_grid_;
if (m_->use_dynamic_grid_ && m_->dynamic_grid_.size () >= 4) {
the_grid = m_->dynamic_grid_;
}
return the_grid;
}
QString Configuration::Field_Day_Exchange() const
{
return m_->FD_exchange_;
}
void Configuration::setEU_VHF_Contest()
{
m_->bSpecialOp_=true;
m_->ui_->gbSpecialOpActivity->setChecked(m_->bSpecialOp_);
m_->ui_->rbEU_VHF_Contest->setChecked(true);
m_->SelectedActivity_ = static_cast<int> (SpecialOperatingActivity::EU_VHF);
m_->write_settings();
}
QString Configuration::RTTY_Exchange() const
{
return m_->RTTY_exchange_;
}
auto Configuration::special_op_id () const -> SpecialOperatingActivity
{
return m_->bSpecialOp_ ? static_cast<SpecialOperatingActivity> (m_->SelectedActivity_) : SpecialOperatingActivity::NONE;
}
void Configuration::set_location (QString const& grid_descriptor)
{
// change the dynamic grid
qDebug () << "Configuration::set_location - location:" << grid_descriptor;
m_->dynamic_grid_ = grid_descriptor.trimmed ();
}
namespace
{
#if defined (Q_OS_MAC)
char const * app_root = "/../../../";
#else
char const * app_root = "/../";
#endif
QString doc_path ()
{
#if CMAKE_BUILD
if (QDir::isRelativePath (CMAKE_INSTALL_DOCDIR))
{
return QApplication::applicationDirPath () + app_root + CMAKE_INSTALL_DOCDIR;
}
return CMAKE_INSTALL_DOCDIR;
#else
return QApplication::applicationDirPath ();
#endif
}
QString data_path ()
{
#if CMAKE_BUILD
if (QDir::isRelativePath (CMAKE_INSTALL_DATADIR))
{
return QApplication::applicationDirPath () + app_root + CMAKE_INSTALL_DATADIR + QChar {'/'} + CMAKE_PROJECT_NAME;
}
return CMAKE_INSTALL_DATADIR;
#else
return QApplication::applicationDirPath ();
#endif
}
}
Configuration::impl::impl (Configuration * self, QNetworkAccessManager * network_manager
, QDir const& temp_directory, QSettings * settings, LogBook * logbook
, QWidget * parent)
: QDialog {parent}
, self_ {self}
, transceiver_thread_ {nullptr}
, ui_ {new Ui::configuration_dialog}
, network_manager_ {network_manager}
, settings_ {settings}
, logbook_ {logbook}
, doc_dir_ {doc_path ()}
, data_dir_ {data_path ()}
, temp_dir_ {temp_directory}
, writeable_data_dir_ {QStandardPaths::writableLocation (QStandardPaths::DataLocation)}
, lotw_users_ {network_manager_}
, restart_sound_input_device_ {false}
, restart_sound_output_device_ {false}
, frequencies_ {&bands_}
, next_frequencies_ {&bands_}
, stations_ {&bands_}
, next_stations_ {&bands_}
, current_offset_ {0}
, current_tx_offset_ {0}
, frequency_dialog_ {new FrequencyDialog {&regions_, &modes_, this}}
, station_delete_action_ {tr ("&Delete"), nullptr}
, station_insert_action_ {tr ("&Insert ..."), nullptr}
, station_dialog_ {new StationDialog {&next_stations_, &bands_, this}}
, highlight_by_mode_ {false}
, include_WAE_entities_ {false}
, LotW_days_since_upload_ {0}
, last_port_type_ {TransceiverFactory::Capabilities::none}
, rig_is_dummy_ {false}
, rig_active_ {false}
, have_rig_ {false}
, rig_changed_ {false}
, rig_resolution_ {0}
, frequency_calibration_disabled_ {false}
, transceiver_command_number_ {0}
, degrade_ {0.} // initialize to zero each run, not
// saved in settings
, default_audio_input_device_selected_ {false}
, default_audio_output_device_selected_ {false}
{
ui_->setupUi (this);
{
// Make sure the default save directory exists
QString save_dir {"save"};
default_save_directory_ = writeable_data_dir_;
default_azel_directory_ = writeable_data_dir_;
if (!default_save_directory_.mkpath (save_dir) || !default_save_directory_.cd (save_dir))
{
MessageBox::critical_message (this, tr ("Failed to create save directory"),
tr ("path: \"%1\%")
.arg (default_save_directory_.absoluteFilePath (save_dir)));
throw std::runtime_error {"Failed to create save directory"};
}
// we now have a deafult save path that exists
// make sure samples directory exists
QString samples_dir {"samples"};
if (!default_save_directory_.mkpath (samples_dir))
{
MessageBox::critical_message (this, tr ("Failed to create samples directory"),
tr ("path: \"%1\"")
.arg (default_save_directory_.absoluteFilePath (samples_dir)));
throw std::runtime_error {"Failed to create samples directory"};
}
// copy in any new sample files to the sample directory
QDir dest_dir {default_save_directory_};
dest_dir.cd (samples_dir);
QDir source_dir {":/" + samples_dir};
source_dir.cd (save_dir);
source_dir.cd (samples_dir);
auto list = source_dir.entryInfoList (QStringList {{"*.wav"}}, QDir::Files | QDir::Readable);
Q_FOREACH (auto const& item, list)
{
if (!dest_dir.exists (item.fileName ()))
{
QFile file {item.absoluteFilePath ()};
file.copy (dest_dir.absoluteFilePath (item.fileName ()));
}
}
}
// this must be done after the default paths above are set
read_settings ();
// set up LoTW users CSV file fetching
connect (&lotw_users_, &LotWUsers::load_finished, [this] () {
ui_->LotW_CSV_fetch_push_button->setEnabled (true);
});
lotw_users_.set_local_file_path (writeable_data_dir_.absoluteFilePath ("lotw-user-activity.csv"));
// load the dictionary if it exists
lotw_users_.load (ui_->LotW_CSV_URL_line_edit->text (), false);
//
// validation
ui_->callsign_line_edit->setValidator (new CallsignValidator {this});
ui_->grid_line_edit->setValidator (new MaidenheadLocatorValidator {this});
ui_->add_macro_line_edit->setValidator (new QRegularExpressionValidator {message_alphabet, this});
ui_->Field_Day_Exchange->setValidator (new QRegularExpressionValidator {field_day_exchange_re, this});
ui_->RTTY_Exchange->setValidator (new QRegularExpressionValidator {RTTY_roundup_exchange_re, this});
ui_->udp_server_port_spin_box->setMinimum (1);
ui_->udp_server_port_spin_box->setMaximum (std::numeric_limits<port_type>::max ());
ui_->n1mm_server_port_spin_box->setMinimum (1);
ui_->n1mm_server_port_spin_box->setMaximum (std::numeric_limits<port_type>::max ());
//
// assign ids to radio buttons
//
ui_->CAT_data_bits_button_group->setId (ui_->CAT_default_bit_radio_button, TransceiverFactory::default_data_bits);
ui_->CAT_data_bits_button_group->setId (ui_->CAT_7_bit_radio_button, TransceiverFactory::seven_data_bits);
ui_->CAT_data_bits_button_group->setId (ui_->CAT_8_bit_radio_button, TransceiverFactory::eight_data_bits);
ui_->CAT_stop_bits_button_group->setId (ui_->CAT_default_stop_bit_radio_button, TransceiverFactory::default_stop_bits);
ui_->CAT_stop_bits_button_group->setId (ui_->CAT_one_stop_bit_radio_button, TransceiverFactory::one_stop_bit);
ui_->CAT_stop_bits_button_group->setId (ui_->CAT_two_stop_bit_radio_button, TransceiverFactory::two_stop_bits);
ui_->CAT_handshake_button_group->setId (ui_->CAT_handshake_default_radio_button, TransceiverFactory::handshake_default);
ui_->CAT_handshake_button_group->setId (ui_->CAT_handshake_none_radio_button, TransceiverFactory::handshake_none);
ui_->CAT_handshake_button_group->setId (ui_->CAT_handshake_xon_radio_button, TransceiverFactory::handshake_XonXoff);
ui_->CAT_handshake_button_group->setId (ui_->CAT_handshake_hardware_radio_button, TransceiverFactory::handshake_hardware);
ui_->PTT_method_button_group->setId (ui_->PTT_VOX_radio_button, TransceiverFactory::PTT_method_VOX);
ui_->PTT_method_button_group->setId (ui_->PTT_CAT_radio_button, TransceiverFactory::PTT_method_CAT);
ui_->PTT_method_button_group->setId (ui_->PTT_DTR_radio_button, TransceiverFactory::PTT_method_DTR);
ui_->PTT_method_button_group->setId (ui_->PTT_RTS_radio_button, TransceiverFactory::PTT_method_RTS);
ui_->TX_audio_source_button_group->setId (ui_->TX_source_mic_radio_button, TransceiverFactory::TX_audio_source_front);
ui_->TX_audio_source_button_group->setId (ui_->TX_source_data_radio_button, TransceiverFactory::TX_audio_source_rear);
ui_->TX_mode_button_group->setId (ui_->mode_none_radio_button, data_mode_none);
ui_->TX_mode_button_group->setId (ui_->mode_USB_radio_button, data_mode_USB);
ui_->TX_mode_button_group->setId (ui_->mode_data_radio_button, data_mode_data);
ui_->split_mode_button_group->setId (ui_->split_none_radio_button, TransceiverFactory::split_mode_none);
ui_->split_mode_button_group->setId (ui_->split_rig_radio_button, TransceiverFactory::split_mode_rig);
ui_->split_mode_button_group->setId (ui_->split_emulate_radio_button, TransceiverFactory::split_mode_emulate);
ui_->special_op_activity_button_group->setId (ui_->rbNA_VHF_Contest, static_cast<int> (SpecialOperatingActivity::NA_VHF));
ui_->special_op_activity_button_group->setId (ui_->rbEU_VHF_Contest, static_cast<int> (SpecialOperatingActivity::EU_VHF));
ui_->special_op_activity_button_group->setId (ui_->rbField_Day, static_cast<int> (SpecialOperatingActivity::FIELD_DAY));
ui_->special_op_activity_button_group->setId (ui_->rbRTTY_Roundup, static_cast<int> (SpecialOperatingActivity::RTTY));
ui_->special_op_activity_button_group->setId (ui_->rbFox, static_cast<int> (SpecialOperatingActivity::FOX));
ui_->special_op_activity_button_group->setId (ui_->rbHound, static_cast<int> (SpecialOperatingActivity::HOUND));
//
// setup PTT port combo box drop down content
//
fill_port_combo_box (ui_->PTT_port_combo_box);
ui_->PTT_port_combo_box->addItem ("CAT");
ui_->PTT_port_combo_box->setItemData (ui_->PTT_port_combo_box->count () - 1, "Delegate to proxy CAT service", Qt::ToolTipRole);
//
// setup hooks to keep audio channels aligned with devices
//
{
using namespace std;
using namespace std::placeholders;
function<void (int)> cb (bind (&Configuration::impl::update_audio_channels, this, ui_->sound_input_combo_box, _1, ui_->sound_input_channel_combo_box, false));
connect (ui_->sound_input_combo_box, static_cast<void (QComboBox::*)(int)> (&QComboBox::currentIndexChanged), cb);
cb = bind (&Configuration::impl::update_audio_channels, this, ui_->sound_output_combo_box, _1, ui_->sound_output_channel_combo_box, true);
connect (ui_->sound_output_combo_box, static_cast<void (QComboBox::*)(int)> (&QComboBox::currentIndexChanged), cb);
}
//
// setup macros list view
//
ui_->macros_list_view->setModel (&next_macros_);
ui_->macros_list_view->setItemDelegate (new MessageItemDelegate {this});
macro_delete_action_ = new QAction {tr ("&Delete"), ui_->macros_list_view};
ui_->macros_list_view->insertAction (nullptr, macro_delete_action_);
connect (macro_delete_action_, &QAction::triggered, this, &Configuration::impl::delete_macro);
// setup IARU region combo box model
ui_->region_combo_box->setModel (&regions_);
//
// setup working frequencies table model & view
//
frequencies_.sort (FrequencyList_v2::frequency_column);
ui_->frequencies_table_view->setModel (&next_frequencies_);
ui_->frequencies_table_view->horizontalHeader ()->setSectionResizeMode (QHeaderView::ResizeToContents);
ui_->frequencies_table_view->verticalHeader ()->setSectionResizeMode (QHeaderView::ResizeToContents);
ui_->frequencies_table_view->sortByColumn (FrequencyList_v2::frequency_column, Qt::AscendingOrder);
ui_->frequencies_table_view->setColumnHidden (FrequencyList_v2::frequency_mhz_column, true);
// delegates
ui_->frequencies_table_view->setItemDelegateForColumn (FrequencyList_v2::frequency_column, new FrequencyDelegate {this});
ui_->frequencies_table_view->setItemDelegateForColumn (FrequencyList_v2::region_column, new ForeignKeyDelegate {&regions_, 0, this});
ui_->frequencies_table_view->setItemDelegateForColumn (FrequencyList_v2::mode_column, new ForeignKeyDelegate {&modes_, 0, this});
// actions
frequency_delete_action_ = new QAction {tr ("&Delete"), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, frequency_delete_action_);
connect (frequency_delete_action_, &QAction::triggered, this, &Configuration::impl::delete_frequencies);
frequency_insert_action_ = new QAction {tr ("&Insert ..."), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, frequency_insert_action_);
connect (frequency_insert_action_, &QAction::triggered, this, &Configuration::impl::insert_frequency);
load_frequencies_action_ = new QAction {tr ("&Load ..."), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, load_frequencies_action_);
connect (load_frequencies_action_, &QAction::triggered, this, &Configuration::impl::load_frequencies);
save_frequencies_action_ = new QAction {tr ("&Save as ..."), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, save_frequencies_action_);
connect (save_frequencies_action_, &QAction::triggered, this, &Configuration::impl::save_frequencies);
merge_frequencies_action_ = new QAction {tr ("&Merge ..."), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, merge_frequencies_action_);
connect (merge_frequencies_action_, &QAction::triggered, this, &Configuration::impl::merge_frequencies);
reset_frequencies_action_ = new QAction {tr ("&Reset"), ui_->frequencies_table_view};
ui_->frequencies_table_view->insertAction (nullptr, reset_frequencies_action_);
connect (reset_frequencies_action_, &QAction::triggered, this, &Configuration::impl::reset_frequencies);
//
// setup stations table model & view
//
stations_.sort (StationList::band_column);
ui_->stations_table_view->setModel (&next_stations_);
ui_->stations_table_view->horizontalHeader ()->setSectionResizeMode (QHeaderView::ResizeToContents);
ui_->stations_table_view->verticalHeader ()->setSectionResizeMode (QHeaderView::ResizeToContents);
ui_->stations_table_view->sortByColumn (StationList::band_column, Qt::AscendingOrder);
// stations delegates
ui_->stations_table_view->setItemDelegateForColumn (StationList::offset_column, new FrequencyDeltaDelegate {this});
ui_->stations_table_view->setItemDelegateForColumn (StationList::band_column, new ForeignKeyDelegate {&bands_, &next_stations_, 0, StationList::band_column, this});
// stations actions
ui_->stations_table_view->addAction (&station_delete_action_);
connect (&station_delete_action_, &QAction::triggered, this, &Configuration::impl::delete_stations);
ui_->stations_table_view->addAction (&station_insert_action_);
connect (&station_insert_action_, &QAction::triggered, this, &Configuration::impl::insert_station);
//
// colours and highlighting setup
//
ui_->highlighting_list_view->setModel (&next_decode_highlighing_model_);
//
// load combo boxes with audio setup choices
//
default_audio_input_device_selected_ = load_audio_devices (QAudio::AudioInput, ui_->sound_input_combo_box, &audio_input_device_);
default_audio_output_device_selected_ = load_audio_devices (QAudio::AudioOutput, ui_->sound_output_combo_box, &audio_output_device_);
update_audio_channels (ui_->sound_input_combo_box, ui_->sound_input_combo_box->currentIndex (), ui_->sound_input_channel_combo_box, false);
update_audio_channels (ui_->sound_output_combo_box, ui_->sound_output_combo_box->currentIndex (), ui_->sound_output_channel_combo_box, true);
ui_->sound_input_channel_combo_box->setCurrentIndex (audio_input_channel_);
ui_->sound_output_channel_combo_box->setCurrentIndex (audio_output_channel_);
enumerate_rigs ();
initialize_models ();
transceiver_thread_ = new QThread {this};
transceiver_thread_->start ();
}
Configuration::impl::~impl ()
{
transceiver_thread_->quit ();
transceiver_thread_->wait ();
write_settings ();
}
void Configuration::impl::initialize_models ()
{
auto pal = ui_->callsign_line_edit->palette ();
if (my_callsign_.isEmpty ())
{
pal.setColor (QPalette::Base, "#ffccff");
}
else
{
pal.setColor (QPalette::Base, Qt::white);
}
ui_->callsign_line_edit->setPalette (pal);
ui_->grid_line_edit->setPalette (pal);
ui_->callsign_line_edit->setText (my_callsign_);
ui_->grid_line_edit->setText (my_grid_);
ui_->use_dynamic_grid->setChecked(use_dynamic_grid_);
ui_->CW_id_interval_spin_box->setValue (id_interval_);
ui_->sbNtrials->setValue (ntrials_);
ui_->sbTxDelay->setValue (txDelay_);
ui_->sbAggressive->setValue (aggressive_);
ui_->sbDegrade->setValue (degrade_);
ui_->sbBandwidth->setValue (RxBandwidth_);
ui_->PTT_method_button_group->button (rig_params_.ptt_type)->setChecked (true);
ui_->save_path_display_label->setText (save_directory_.absolutePath ());
ui_->azel_path_display_label->setText (azel_directory_.absolutePath ());
ui_->CW_id_after_73_check_box->setChecked (id_after_73_);
ui_->tx_QSY_check_box->setChecked (tx_QSY_allowed_);
ui_->psk_reporter_check_box->setChecked (spot_to_psk_reporter_);
ui_->monitor_off_check_box->setChecked (monitor_off_at_startup_);
ui_->monitor_last_used_check_box->setChecked (monitor_last_used_);
ui_->log_as_RTTY_check_box->setChecked (log_as_RTTY_);
ui_->report_in_comments_check_box->setChecked (report_in_comments_);
ui_->prompt_to_log_check_box->setChecked (prompt_to_log_);
ui_->cbAutoLog->setChecked(autoLog_);
ui_->decodes_from_top_check_box->setChecked (decodes_from_top_);
ui_->insert_blank_check_box->setChecked (insert_blank_);
ui_->DXCC_check_box->setChecked (DXCC_);
ui_->ppfx_check_box->setChecked (ppfx_);
ui_->clear_DX_check_box->setChecked (clear_DX_);
ui_->miles_check_box->setChecked (miles_);
ui_->quick_call_check_box->setChecked (quick_call_);
ui_->disable_TX_on_73_check_box->setChecked (disable_TX_on_73_);
ui_->force_call_1st_check_box->setChecked (force_call_1st_);
ui_->alternate_bindings_check_box->setChecked (alternate_bindings_);
ui_->tx_watchdog_spin_box->setValue (watchdog_);
ui_->TX_messages_check_box->setChecked (TX_messages_);
ui_->enable_VHF_features_check_box->setChecked(enable_VHF_features_);
ui_->decode_at_52s_check_box->setChecked(decode_at_52s_);
ui_->single_decode_check_box->setChecked(single_decode_);
ui_->cbTwoPass->setChecked(twoPass_);
ui_->gbSpecialOpActivity->setChecked(bSpecialOp_);
ui_->special_op_activity_button_group->button (SelectedActivity_)->setChecked (true);
ui_->cbx2ToneSpacing->setChecked(x2ToneSpacing_);
ui_->cbx4ToneSpacing->setChecked(x4ToneSpacing_);
ui_->type_2_msg_gen_combo_box->setCurrentIndex (type_2_msg_gen_);
ui_->rig_combo_box->setCurrentText (rig_params_.rig_name);
ui_->TX_mode_button_group->button (data_mode_)->setChecked (true);
ui_->split_mode_button_group->button (rig_params_.split_mode)->setChecked (true);
ui_->CAT_serial_baud_combo_box->setCurrentText (QString::number (rig_params_.baud));
ui_->CAT_data_bits_button_group->button (rig_params_.data_bits)->setChecked (true);
ui_->CAT_stop_bits_button_group->button (rig_params_.stop_bits)->setChecked (true);
ui_->CAT_handshake_button_group->button (rig_params_.handshake)->setChecked (true);
ui_->checkBoxPwrBandTxMemory->setChecked(pwrBandTxMemory_);
ui_->checkBoxPwrBandTuneMemory->setChecked(pwrBandTuneMemory_);
if (rig_params_.force_dtr)
{
ui_->force_DTR_combo_box->setCurrentIndex (rig_params_.dtr_high ? 1 : 2);
}
else
{
ui_->force_DTR_combo_box->setCurrentIndex (0);
}
if (rig_params_.force_rts)
{
ui_->force_RTS_combo_box->setCurrentIndex (rig_params_.rts_high ? 1 : 2);
}
else
{
ui_->force_RTS_combo_box->setCurrentIndex (0);
}
ui_->TX_audio_source_button_group->button (rig_params_.audio_source)->setChecked (true);
ui_->CAT_poll_interval_spin_box->setValue (rig_params_.poll_interval);
ui_->opCallEntry->setText (opCall_);
ui_->udp_server_line_edit->setText (udp_server_name_);
ui_->udp_server_port_spin_box->setValue (udp_server_port_);
ui_->accept_udp_requests_check_box->setChecked (accept_udp_requests_);
ui_->n1mm_server_name_line_edit->setText (n1mm_server_name_);
ui_->n1mm_server_port_spin_box->setValue (n1mm_server_port_);
ui_->enable_n1mm_broadcast_check_box->setChecked (broadcast_to_n1mm_);
ui_->udpWindowToFront->setChecked(udpWindowToFront_);
ui_->udpWindowRestore->setChecked(udpWindowRestore_);
ui_->calibration_intercept_spin_box->setValue (calibration_.intercept);
ui_->calibration_slope_ppm_spin_box->setValue (calibration_.slope_ppm);
ui_->rbLowSidelobes->setChecked(bLowSidelobes_);
if(!bLowSidelobes_) ui_->rbMaxSensitivity->setChecked(true);
if (rig_params_.ptt_port.isEmpty ())
{
if (ui_->PTT_port_combo_box->count ())
{
ui_->PTT_port_combo_box->setCurrentText (ui_->PTT_port_combo_box->itemText (0));
}
}
else
{
ui_->PTT_port_combo_box->setCurrentText (rig_params_.ptt_port);
}
ui_->region_combo_box->setCurrentIndex (region_);
next_macros_.setStringList (macros_.stringList ());
next_frequencies_.frequency_list (frequencies_.frequency_list ());
next_stations_.station_list (stations_.station_list ());
next_decode_highlighing_model_.items (decode_highlighing_model_.items ());
ui_->highlight_by_mode_check_box->setChecked (highlight_by_mode_);
ui_->include_WAE_check_box->setChecked (include_WAE_entities_);
ui_->LotW_days_since_upload_spin_box->setValue (LotW_days_since_upload_);
set_rig_invariants ();
}
void Configuration::impl::done (int r)
{
// do this here since window is still on screen at this point
SettingsGroup g {settings_, "Configuration"};
settings_->setValue ("window/geometry", saveGeometry ());
QDialog::done (r);
}
void Configuration::impl::read_settings ()
{
SettingsGroup g {settings_, "Configuration"};
restoreGeometry (settings_->value ("window/geometry").toByteArray ());
my_callsign_ = settings_->value ("MyCall", QString {}).toString ();
my_grid_ = settings_->value ("MyGrid", QString {}).toString ();
FD_exchange_ = settings_->value ("Field_Day_Exchange",QString {}).toString ();
RTTY_exchange_ = settings_->value ("RTTY_Exchange",QString {}).toString ();
ui_->Field_Day_Exchange->setText(FD_exchange_);
ui_->RTTY_Exchange->setText(RTTY_exchange_);
if (next_font_.fromString (settings_->value ("Font", QGuiApplication::font ().toString ()).toString ())
&& next_font_ != font_)
{
font_ = next_font_;
Q_EMIT self_->text_font_changed (font_);
}
else
{
next_font_ = font_;
}
if (next_decoded_text_font_.fromString (settings_->value ("DecodedTextFont", "Courier, 10").toString ())
&& next_decoded_text_font_ != decoded_text_font_)
{
decoded_text_font_ = next_decoded_text_font_;
next_decode_highlighing_model_.set_font (decoded_text_font_);
ui_->highlighting_list_view->reset ();
Q_EMIT self_->decoded_text_font_changed (decoded_text_font_);
}
else
{
next_decoded_text_font_ = decoded_text_font_;
}
id_interval_ = settings_->value ("IDint", 0).toInt ();
ntrials_ = settings_->value ("nTrials", 6).toInt ();
txDelay_ = settings_->value ("TxDelay",0.2).toDouble();
aggressive_ = settings_->value ("Aggressive", 0).toInt ();
RxBandwidth_ = settings_->value ("RxBandwidth", 2500).toInt ();
save_directory_ = settings_->value ("SaveDir", default_save_directory_.absolutePath ()).toString ();
azel_directory_ = settings_->value ("AzElDir", default_azel_directory_.absolutePath ()).toString ();
{
//
// retrieve audio input device
//
auto saved_name = settings_->value ("SoundInName").toString ();
// deal with special Windows default audio devices
auto default_device = QAudioDeviceInfo::defaultInputDevice ();
if (saved_name == default_device.deviceName ())
{
audio_input_device_ = default_device;
default_audio_input_device_selected_ = true;
}
else
{
default_audio_input_device_selected_ = false;
Q_FOREACH (auto const& p, QAudioDeviceInfo::availableDevices (QAudio::AudioInput)) // available audio input devices
{
if (p.deviceName () == saved_name)
{
audio_input_device_ = p;
}
}
}
}
{
//
// retrieve audio output device
//
auto saved_name = settings_->value("SoundOutName").toString();
// deal with special Windows default audio devices
auto default_device = QAudioDeviceInfo::defaultOutputDevice ();
if (saved_name == default_device.deviceName ())
{
audio_output_device_ = default_device;
default_audio_output_device_selected_ = true;
}
else
{
default_audio_output_device_selected_ = false;
Q_FOREACH (auto const& p, QAudioDeviceInfo::availableDevices (QAudio::AudioOutput)) // available audio output devices
{
if (p.deviceName () == saved_name)
{
audio_output_device_ = p;
}
}
}
}
// retrieve audio channel info
audio_input_channel_ = AudioDevice::fromString (settings_->value ("AudioInputChannel", "Mono").toString ());
audio_output_channel_ = AudioDevice::fromString (settings_->value ("AudioOutputChannel", "Mono").toString ());
type_2_msg_gen_ = settings_->value ("Type2MsgGen", QVariant::fromValue (Configuration::type_2_msg_3_full)).value<Configuration::Type2MsgGen> ();
monitor_off_at_startup_ = settings_->value ("MonitorOFF", false).toBool ();
monitor_last_used_ = settings_->value ("MonitorLastUsed", false).toBool ();
spot_to_psk_reporter_ = settings_->value ("PSKReporter", false).toBool ();
id_after_73_ = settings_->value ("After73", false).toBool ();
tx_QSY_allowed_ = settings_->value ("TxQSYAllowed", false).toBool ();
use_dynamic_grid_ = settings_->value ("AutoGrid", false).toBool ();
macros_.setStringList (settings_->value ("Macros", QStringList {"TNX 73 GL"}).toStringList ());
region_ = settings_->value ("Region", QVariant::fromValue (IARURegions::ALL)).value<IARURegions::Region> ();
if (settings_->contains ("FrequenciesForRegionModes"))
{
auto const& v = settings_->value ("FrequenciesForRegionModes");
if (v.isValid ())
{
frequencies_.frequency_list (v.value<FrequencyList_v2::FrequencyItems> ());
}
else
{
frequencies_.reset_to_defaults ();
}
}
else
{
frequencies_.reset_to_defaults ();
}
stations_.station_list (settings_->value ("stations").value<StationList::Stations> ());
auto highlight_items = settings_->value ("DecodeHighlighting", QVariant::fromValue (DecodeHighlightingModel::default_items ())).value<DecodeHighlightingModel::HighlightItems> ();
if (!highlight_items.size ()) highlight_items = DecodeHighlightingModel::default_items ();
decode_highlighing_model_.items (highlight_items);
highlight_by_mode_ = settings_->value("HighlightByMode", false).toBool ();
include_WAE_entities_ = settings_->value("IncludeWAEEntities", false).toBool ();
LotW_days_since_upload_ = settings_->value ("LotWDaysSinceLastUpload", 365).toInt ();
lotw_users_.set_age_constraint (LotW_days_since_upload_);
log_as_RTTY_ = settings_->value ("toRTTY", false).toBool ();
report_in_comments_ = settings_->value("dBtoComments", false).toBool ();
rig_params_.rig_name = settings_->value ("Rig", TransceiverFactory::basic_transceiver_name_).toString ();
rig_is_dummy_ = TransceiverFactory::basic_transceiver_name_ == rig_params_.rig_name;
rig_params_.network_port = settings_->value ("CATNetworkPort").toString ();
rig_params_.usb_port = settings_->value ("CATUSBPort").toString ();
rig_params_.serial_port = settings_->value ("CATSerialPort").toString ();
rig_params_.baud = settings_->value ("CATSerialRate", 4800).toInt ();
rig_params_.data_bits = settings_->value ("CATDataBits", QVariant::fromValue (TransceiverFactory::default_data_bits)).value<TransceiverFactory::DataBits> ();
rig_params_.stop_bits = settings_->value ("CATStopBits", QVariant::fromValue (TransceiverFactory::default_stop_bits)).value<TransceiverFactory::StopBits> ();
rig_params_.handshake = settings_->value ("CATHandshake", QVariant::fromValue (TransceiverFactory::handshake_default)).value<TransceiverFactory::Handshake> ();
rig_params_.force_dtr = settings_->value ("CATForceDTR", false).toBool ();
rig_params_.dtr_high = settings_->value ("DTR", false).toBool ();
rig_params_.force_rts = settings_->value ("CATForceRTS", false).toBool ();
rig_params_.rts_high = settings_->value ("RTS", false).toBool ();
rig_params_.ptt_type = settings_->value ("PTTMethod", QVariant::fromValue (TransceiverFactory::PTT_method_VOX)).value<TransceiverFactory::PTTMethod> ();
rig_params_.audio_source = settings_->value ("TXAudioSource", QVariant::fromValue (TransceiverFactory::TX_audio_source_front)).value<TransceiverFactory::TXAudioSource> ();
rig_params_.ptt_port = settings_->value ("PTTport").toString ();
data_mode_ = settings_->value ("DataMode", QVariant::fromValue (data_mode_none)).value<Configuration::DataMode> ();
bLowSidelobes_ = settings_->value("LowSidelobes",true).toBool();
prompt_to_log_ = settings_->value ("PromptToLog", false).toBool ();
autoLog_ = settings_->value ("AutoLog", false).toBool ();
decodes_from_top_ = settings_->value ("DecodesFromTop", false).toBool ();
insert_blank_ = settings_->value ("InsertBlank", false).toBool ();
DXCC_ = settings_->value ("DXCCEntity", false).toBool ();
ppfx_ = settings_->value ("PrincipalPrefix", false).toBool ();
clear_DX_ = settings_->value ("ClearCallGrid", false).toBool ();
miles_ = settings_->value ("Miles", false).toBool ();
quick_call_ = settings_->value ("QuickCall", false).toBool ();
disable_TX_on_73_ = settings_->value ("73TxDisable", false).toBool ();
force_call_1st_ = settings_->value ("ForceCallFirst", false).toBool ();
alternate_bindings_ = settings_->value ("AlternateBindings", false).toBool ();
watchdog_ = settings_->value ("TxWatchdog", 6).toInt ();
TX_messages_ = settings_->value ("Tx2QSO", true).toBool ();
enable_VHF_features_ = settings_->value("VHFUHF",false).toBool ();
decode_at_52s_ = settings_->value("Decode52",false).toBool ();
single_decode_ = settings_->value("SingleDecode",false).toBool ();
twoPass_ = settings_->value("TwoPass",true).toBool ();
bSpecialOp_ = settings_->value("SpecialOpActivity",false).toBool ();
SelectedActivity_ = settings_->value("SelectedActivity",1).toInt ();
x2ToneSpacing_ = settings_->value("x2ToneSpacing",false).toBool ();
x4ToneSpacing_ = settings_->value("x4ToneSpacing",false).toBool ();
rig_params_.poll_interval = settings_->value ("Polling", 0).toInt ();
rig_params_.split_mode = settings_->value ("SplitMode", QVariant::fromValue (TransceiverFactory::split_mode_none)).value<TransceiverFactory::SplitMode> ();
opCall_ = settings_->value ("OpCall", "").toString ();
udp_server_name_ = settings_->value ("UDPServer", "127.0.0.1").toString ();
udp_server_port_ = settings_->value ("UDPServerPort", 2237).toUInt ();
n1mm_server_name_ = settings_->value ("N1MMServer", "127.0.0.1").toString ();
n1mm_server_port_ = settings_->value ("N1MMServerPort", 2333).toUInt ();
broadcast_to_n1mm_ = settings_->value ("BroadcastToN1MM", false).toBool ();
accept_udp_requests_ = settings_->value ("AcceptUDPRequests", false).toBool ();
udpWindowToFront_ = settings_->value ("udpWindowToFront",false).toBool ();
udpWindowRestore_ = settings_->value ("udpWindowRestore",false).toBool ();
calibration_.intercept = settings_->value ("CalibrationIntercept", 0.).toDouble ();
calibration_.slope_ppm = settings_->value ("CalibrationSlopePPM", 0.).toDouble ();
pwrBandTxMemory_ = settings_->value("pwrBandTxMemory",false).toBool ();
pwrBandTuneMemory_ = settings_->value("pwrBandTuneMemory",false).toBool ();
}
void Configuration::impl::write_settings ()
{
SettingsGroup g {settings_, "Configuration"};
settings_->setValue ("MyCall", my_callsign_);
settings_->setValue ("MyGrid", my_grid_);
settings_->setValue ("Field_Day_Exchange", FD_exchange_);
settings_->setValue ("RTTY_Exchange", RTTY_exchange_);
settings_->setValue ("Font", font_.toString ());
settings_->setValue ("DecodedTextFont", decoded_text_font_.toString ());
settings_->setValue ("IDint", id_interval_);
settings_->setValue ("nTrials", ntrials_);
settings_->setValue ("TxDelay", txDelay_);
settings_->setValue ("Aggressive", aggressive_);
settings_->setValue ("RxBandwidth", RxBandwidth_);
settings_->setValue ("PTTMethod", QVariant::fromValue (rig_params_.ptt_type));
settings_->setValue ("PTTport", rig_params_.ptt_port);
settings_->setValue ("SaveDir", save_directory_.absolutePath ());
settings_->setValue ("AzElDir", azel_directory_.absolutePath ());
if (default_audio_input_device_selected_)
{
settings_->setValue ("SoundInName", QAudioDeviceInfo::defaultInputDevice ().deviceName ());
}
else
{
settings_->setValue ("SoundInName", audio_input_device_.deviceName ());
}
if (default_audio_output_device_selected_)
{
settings_->setValue ("SoundOutName", QAudioDeviceInfo::defaultOutputDevice ().deviceName ());
}
else
{
settings_->setValue ("SoundOutName", audio_output_device_.deviceName ());
}
settings_->setValue ("AudioInputChannel", AudioDevice::toString (audio_input_channel_));
settings_->setValue ("AudioOutputChannel", AudioDevice::toString (audio_output_channel_));
settings_->setValue ("Type2MsgGen", QVariant::fromValue (type_2_msg_gen_));
settings_->setValue ("MonitorOFF", monitor_off_at_startup_);
settings_->setValue ("MonitorLastUsed", monitor_last_used_);
settings_->setValue ("PSKReporter", spot_to_psk_reporter_);
settings_->setValue ("After73", id_after_73_);
settings_->setValue ("TxQSYAllowed", tx_QSY_allowed_);
settings_->setValue ("Macros", macros_.stringList ());
settings_->setValue ("FrequenciesForRegionModes", QVariant::fromValue (frequencies_.frequency_list ()));
settings_->setValue ("stations", QVariant::fromValue (stations_.station_list ()));
settings_->setValue ("DecodeHighlighting", QVariant::fromValue (decode_highlighing_model_.items ()));
settings_->setValue ("IncludeWAEEntities", include_WAE_entities_);
settings_->setValue ("LotWDaysSinceLastUpload", LotW_days_since_upload_);
settings_->setValue ("toRTTY", log_as_RTTY_);
settings_->setValue ("dBtoComments", report_in_comments_);
settings_->setValue ("Rig", rig_params_.rig_name);
settings_->setValue ("CATNetworkPort", rig_params_.network_port);
settings_->setValue ("CATUSBPort", rig_params_.usb_port);
settings_->setValue ("CATSerialPort", rig_params_.serial_port);
settings_->setValue ("CATSerialRate", rig_params_.baud);
settings_->setValue ("CATDataBits", QVariant::fromValue (rig_params_.data_bits));
settings_->setValue ("CATStopBits", QVariant::fromValue (rig_params_.stop_bits));
settings_->setValue ("CATHandshake", QVariant::fromValue (rig_params_.handshake));
settings_->setValue ("DataMode", QVariant::fromValue (data_mode_));
settings_->setValue ("LowSidelobes",bLowSidelobes_);
settings_->setValue ("PromptToLog", prompt_to_log_);
settings_->setValue ("AutoLog", autoLog_);
settings_->setValue ("DecodesFromTop", decodes_from_top_);
settings_->setValue ("InsertBlank", insert_blank_);
settings_->setValue ("DXCCEntity", DXCC_);
settings_->setValue ("PrincipalPrefix", ppfx_);
settings_->setValue ("ClearCallGrid", clear_DX_);
settings_->setValue ("Miles", miles_);
settings_->setValue ("QuickCall", quick_call_);
settings_->setValue ("73TxDisable", disable_TX_on_73_);
settings_->setValue ("ForceCallFirst", force_call_1st_);
settings_->setValue ("AlternateBindings", alternate_bindings_);
settings_->setValue ("TxWatchdog", watchdog_);
settings_->setValue ("Tx2QSO", TX_messages_);
settings_->setValue ("CATForceDTR", rig_params_.force_dtr);
settings_->setValue ("DTR", rig_params_.dtr_high);
settings_->setValue ("CATForceRTS", rig_params_.force_rts);
settings_->setValue ("RTS", rig_params_.rts_high);
settings_->setValue ("TXAudioSource", QVariant::fromValue (rig_params_.audio_source));
settings_->setValue ("Polling", rig_params_.poll_interval);
settings_->setValue ("SplitMode", QVariant::fromValue (rig_params_.split_mode));
settings_->setValue ("VHFUHF", enable_VHF_features_);
settings_->setValue ("Decode52", decode_at_52s_);
settings_->setValue ("SingleDecode", single_decode_);
settings_->setValue ("TwoPass", twoPass_);
settings_->setValue ("SelectedActivity", SelectedActivity_);
settings_->setValue ("SpecialOpActivity", bSpecialOp_);
settings_->setValue ("x2ToneSpacing", x2ToneSpacing_);
settings_->setValue ("x4ToneSpacing", x4ToneSpacing_);
settings_->setValue ("OpCall", opCall_);
settings_->setValue ("UDPServer", udp_server_name_);
settings_->setValue ("UDPServerPort", udp_server_port_);
settings_->setValue ("N1MMServer", n1mm_server_name_);
settings_->setValue ("N1MMServerPort", n1mm_server_port_);
settings_->setValue ("BroadcastToN1MM", broadcast_to_n1mm_);
settings_->setValue ("AcceptUDPRequests", accept_udp_requests_);
settings_->setValue ("udpWindowToFront", udpWindowToFront_);
settings_->setValue ("udpWindowRestore", udpWindowRestore_);
settings_->setValue ("CalibrationIntercept", calibration_.intercept);
settings_->setValue ("CalibrationSlopePPM", calibration_.slope_ppm);
settings_->setValue ("pwrBandTxMemory", pwrBandTxMemory_);
settings_->setValue ("pwrBandTuneMemory", pwrBandTuneMemory_);
settings_->setValue ("Region", QVariant::fromValue (region_));
settings_->setValue ("AutoGrid", use_dynamic_grid_);
}
void Configuration::impl::set_rig_invariants ()
{
auto const& rig = ui_->rig_combo_box->currentText ();
auto const& ptt_port = ui_->PTT_port_combo_box->currentText ();
auto ptt_method = static_cast<TransceiverFactory::PTTMethod> (ui_->PTT_method_button_group->checkedId ());
auto CAT_PTT_enabled = transceiver_factory_.has_CAT_PTT (rig);
auto CAT_indirect_serial_PTT = transceiver_factory_.has_CAT_indirect_serial_PTT (rig);
auto asynchronous_CAT = transceiver_factory_.has_asynchronous_CAT (rig);
auto is_hw_handshake = ui_->CAT_handshake_group_box->isEnabled ()
&& TransceiverFactory::handshake_hardware == static_cast<TransceiverFactory::Handshake> (ui_->CAT_handshake_button_group->checkedId ());
ui_->test_CAT_push_button->setStyleSheet ({});
ui_->CAT_poll_interval_label->setEnabled (!asynchronous_CAT);
ui_->CAT_poll_interval_spin_box->setEnabled (!asynchronous_CAT);
auto port_type = transceiver_factory_.CAT_port_type (rig);
bool is_serial_CAT (TransceiverFactory::Capabilities::serial == port_type);
auto const& cat_port = ui_->CAT_port_combo_box->currentText ();
// only enable CAT option if transceiver has CAT PTT
ui_->PTT_CAT_radio_button->setEnabled (CAT_PTT_enabled);
auto enable_ptt_port = TransceiverFactory::PTT_method_CAT != ptt_method && TransceiverFactory::PTT_method_VOX != ptt_method;
ui_->PTT_port_combo_box->setEnabled (enable_ptt_port);
ui_->PTT_port_label->setEnabled (enable_ptt_port);
if (CAT_indirect_serial_PTT)
{
ui_->PTT_port_combo_box->setItemData (ui_->PTT_port_combo_box->findText ("CAT")
, combo_box_item_enabled, Qt::UserRole - 1);
}
else
{
ui_->PTT_port_combo_box->setItemData (ui_->PTT_port_combo_box->findText ("CAT")
, combo_box_item_disabled, Qt::UserRole - 1);
if ("CAT" == ui_->PTT_port_combo_box->currentText () && ui_->PTT_port_combo_box->currentIndex () > 0)
{
ui_->PTT_port_combo_box->setCurrentIndex (ui_->PTT_port_combo_box->currentIndex () - 1);
}
}
ui_->PTT_RTS_radio_button->setEnabled (!(is_serial_CAT && ptt_port == cat_port && is_hw_handshake));
if (TransceiverFactory::basic_transceiver_name_ == rig)
{
// makes no sense with rig as "None"
ui_->monitor_last_used_check_box->setEnabled (false);
ui_->CAT_control_group_box->setEnabled (false);
ui_->test_CAT_push_button->setEnabled (false);
ui_->test_PTT_push_button->setEnabled (TransceiverFactory::PTT_method_DTR == ptt_method
|| TransceiverFactory::PTT_method_RTS == ptt_method);
ui_->TX_audio_source_group_box->setEnabled (false);
}
else
{
ui_->monitor_last_used_check_box->setEnabled (true);
ui_->CAT_control_group_box->setEnabled (true);
ui_->test_CAT_push_button->setEnabled (true);
ui_->test_PTT_push_button->setEnabled (false);
ui_->TX_audio_source_group_box->setEnabled (transceiver_factory_.has_CAT_PTT_mic_data (rig) && TransceiverFactory::PTT_method_CAT == ptt_method);
if (port_type != last_port_type_)
{
last_port_type_ = port_type;
switch (port_type)
{
case TransceiverFactory::Capabilities::serial:
fill_port_combo_box (ui_->CAT_port_combo_box);
ui_->CAT_port_combo_box->setCurrentText (rig_params_.serial_port);
if (ui_->CAT_port_combo_box->currentText ().isEmpty () && ui_->CAT_port_combo_box->count ())
{
ui_->CAT_port_combo_box->setCurrentText (ui_->CAT_port_combo_box->itemText (0));
}
ui_->CAT_port_label->setText (tr ("Serial Port:"));
ui_->CAT_port_combo_box->setToolTip (tr ("Serial port used for CAT control"));
ui_->CAT_port_combo_box->setEnabled (true);
break;
case TransceiverFactory::Capabilities::network:
ui_->CAT_port_combo_box->clear ();
ui_->CAT_port_combo_box->setCurrentText (rig_params_.network_port);
ui_->CAT_port_label->setText (tr ("Network Server:"));
ui_->CAT_port_combo_box->setToolTip (tr ("Optional hostname and port of network service.\n"
"Leave blank for a sensible default on this machine.\n"
"Formats:\n"
"\thostname:port\n"
"\tIPv4-address:port\n"
"\t[IPv6-address]:port"));
ui_->CAT_port_combo_box->setEnabled (true);
break;
case TransceiverFactory::Capabilities::usb:
ui_->CAT_port_combo_box->clear ();
ui_->CAT_port_combo_box->setCurrentText (rig_params_.usb_port);
ui_->CAT_port_label->setText (tr ("USB Device:"));
ui_->CAT_port_combo_box->setToolTip (tr ("Optional device identification.\n"
"Leave blank for a sensible default for the rig.\n"
"Format:\n"
"\t[VID[:PID[:VENDOR[:PRODUCT]]]]"));
ui_->CAT_port_combo_box->setEnabled (true);
break;
default:
ui_->CAT_port_combo_box->clear ();
ui_->CAT_port_combo_box->setEnabled (false);
break;
}
}
ui_->CAT_serial_port_parameters_group_box->setEnabled (is_serial_CAT);
ui_->force_DTR_combo_box->setEnabled (is_serial_CAT
&& (cat_port != ptt_port
|| !ui_->PTT_DTR_radio_button->isEnabled ()
|| !ui_->PTT_DTR_radio_button->isChecked ()));
ui_->force_RTS_combo_box->setEnabled (is_serial_CAT
&& !is_hw_handshake
&& (cat_port != ptt_port
|| !ui_->PTT_RTS_radio_button->isEnabled ()
|| !ui_->PTT_RTS_radio_button->isChecked ()));
}
ui_->mode_group_box->setEnabled (WSJT_RIG_NONE_CAN_SPLIT
|| TransceiverFactory::basic_transceiver_name_ != rig);
ui_->split_operation_group_box->setEnabled (WSJT_RIG_NONE_CAN_SPLIT
|| TransceiverFactory::basic_transceiver_name_ != rig);
}
bool Configuration::impl::validate ()
{
if (ui_->sound_input_combo_box->currentIndex () < 0
&& !QAudioDeviceInfo::availableDevices (QAudio::AudioInput).empty ())
{
MessageBox::critical_message (this, tr ("Invalid audio input device"));
return false;
}
if (ui_->sound_output_combo_box->currentIndex () < 0
&& !QAudioDeviceInfo::availableDevices (QAudio::AudioOutput).empty ())
{
MessageBox::critical_message (this, tr ("Invalid audio out device"));
return false;
}
if (!ui_->PTT_method_button_group->checkedButton ()->isEnabled ())
{
MessageBox::critical_message (this, tr ("Invalid PTT method"));
return false;
}
auto ptt_method = static_cast<TransceiverFactory::PTTMethod> (ui_->PTT_method_button_group->checkedId ());
auto ptt_port = ui_->PTT_port_combo_box->currentText ();
if ((TransceiverFactory::PTT_method_DTR == ptt_method || TransceiverFactory::PTT_method_RTS == ptt_method)
&& (ptt_port.isEmpty ()
|| combo_box_item_disabled == ui_->PTT_port_combo_box->itemData (ui_->PTT_port_combo_box->findText (ptt_port), Qt::UserRole - 1)))
{
MessageBox::critical_message (this, tr ("Invalid PTT port"));
return false;
}
if (ui_->rbField_Day->isEnabled () && ui_->rbField_Day->isChecked () &&
!ui_->Field_Day_Exchange->hasAcceptableInput ())
{
for (auto * parent = ui_->Field_Day_Exchange->parentWidget (); parent; parent = parent->parentWidget ())
{
auto index = ui_->configuration_tabs->indexOf (parent);
if (index != -1)
{
ui_->configuration_tabs->setCurrentIndex (index);
break;
}
}
ui_->Field_Day_Exchange->setFocus ();
MessageBox::critical_message (this, tr ("Invalid Contest Exchange")
, tr ("You must input a valid ARRL Field Day exchange"));
return false;
}
if (ui_->rbRTTY_Roundup->isEnabled () && ui_->rbRTTY_Roundup->isChecked () &&
!ui_->RTTY_Exchange->hasAcceptableInput ())
{
for (auto * parent = ui_->RTTY_Exchange->parentWidget (); parent; parent = parent->parentWidget ())
{
auto index = ui_->configuration_tabs->indexOf (parent);
if (index != -1)
{
ui_->configuration_tabs->setCurrentIndex (index);
break;
}
}
ui_->RTTY_Exchange->setFocus ();
MessageBox::critical_message (this, tr ("Invalid Contest Exchange")
, tr ("You must input a valid ARRL RTTY Roundup exchange"));
return false;
}
return true;
}
int Configuration::impl::exec ()
{
// macros can be modified in the main window
next_macros_.setStringList (macros_.stringList ());
have_rig_ = rig_active_; // record that we started with a rig open
saved_rig_params_ = rig_params_; // used to detect changes that
// require the Transceiver to be
// re-opened
rig_changed_ = false;
initialize_models ();
return QDialog::exec();
}
TransceiverFactory::ParameterPack Configuration::impl::gather_rig_data ()
{
TransceiverFactory::ParameterPack result;
result.rig_name = ui_->rig_combo_box->currentText ();
switch (transceiver_factory_.CAT_port_type (result.rig_name))
{
case TransceiverFactory::Capabilities::network:
result.network_port = ui_->CAT_port_combo_box->currentText ();
result.usb_port = rig_params_.usb_port;
result.serial_port = rig_params_.serial_port;
break;
case TransceiverFactory::Capabilities::usb:
result.usb_port = ui_->CAT_port_combo_box->currentText ();
result.network_port = rig_params_.network_port;
result.serial_port = rig_params_.serial_port;
break;
default:
result.serial_port = ui_->CAT_port_combo_box->currentText ();
result.network_port = rig_params_.network_port;
result.usb_port = rig_params_.usb_port;
break;
}
result.baud = ui_->CAT_serial_baud_combo_box->currentText ().toInt ();
result.data_bits = static_cast<TransceiverFactory::DataBits> (ui_->CAT_data_bits_button_group->checkedId ());
result.stop_bits = static_cast<TransceiverFactory::StopBits> (ui_->CAT_stop_bits_button_group->checkedId ());
result.handshake = static_cast<TransceiverFactory::Handshake> (ui_->CAT_handshake_button_group->checkedId ());
result.force_dtr = ui_->force_DTR_combo_box->isEnabled () && ui_->force_DTR_combo_box->currentIndex () > 0;
result.dtr_high = ui_->force_DTR_combo_box->isEnabled () && 1 == ui_->force_DTR_combo_box->currentIndex ();
result.force_rts = ui_->force_RTS_combo_box->isEnabled () && ui_->force_RTS_combo_box->currentIndex () > 0;
result.rts_high = ui_->force_RTS_combo_box->isEnabled () && 1 == ui_->force_RTS_combo_box->currentIndex ();
result.poll_interval = ui_->CAT_poll_interval_spin_box->value ();
result.ptt_type = static_cast<TransceiverFactory::PTTMethod> (ui_->PTT_method_button_group->checkedId ());
result.ptt_port = ui_->PTT_port_combo_box->currentText ();
result.audio_source = static_cast<TransceiverFactory::TXAudioSource> (ui_->TX_audio_source_button_group->checkedId ());
result.split_mode = static_cast<TransceiverFactory::SplitMode> (ui_->split_mode_button_group->checkedId ());
return result;
}
void Configuration::impl::accept ()
{
// Called when OK button is clicked.
if (!validate ())
{
return; // not accepting
}
// extract all rig related configuration parameters into temporary
// structure for checking if the rig needs re-opening without
// actually updating our live state
auto temp_rig_params = gather_rig_data ();
// open_rig() uses values from models so we use it to validate the
// Transceiver settings before agreeing to accept the configuration
if (temp_rig_params != rig_params_ && !open_rig ())
{
return; // not accepting
}
QDialog::accept(); // do this before accessing custom
// models so that any changes in
// delegates in views get flushed to
// the underlying models before we
// access them
sync_transceiver (true); // force an update
//
// from here on we are bound to accept the new configuration
// parameters so extract values from models and make them live
//
if (next_font_ != font_)
{
font_ = next_font_;
Q_EMIT self_->text_font_changed (font_);
}
if (next_decoded_text_font_ != decoded_text_font_)
{
decoded_text_font_ = next_decoded_text_font_;
next_decode_highlighing_model_.set_font (decoded_text_font_);
ui_->highlighting_list_view->reset ();
Q_EMIT self_->decoded_text_font_changed (decoded_text_font_);
}
rig_params_ = temp_rig_params; // now we can go live with the rig
// related configuration parameters
rig_is_dummy_ = TransceiverFactory::basic_transceiver_name_ == rig_params_.rig_name;
// Check to see whether SoundInThread must be restarted,
// and save user parameters.
{
auto const& device_name = ui_->sound_input_combo_box->currentText ();
if (device_name != audio_input_device_.deviceName ())
{
auto const& default_device = QAudioDeviceInfo::defaultInputDevice ();
if (device_name == default_device.deviceName ())
{
audio_input_device_ = default_device;
}
else
{
bool found {false};
Q_FOREACH (auto const& d, QAudioDeviceInfo::availableDevices (QAudio::AudioInput))
{
if (device_name == d.deviceName ())
{
audio_input_device_ = d;
found = true;
}
}
if (!found)
{
audio_input_device_ = default_device;
}
}
restart_sound_input_device_ = true;
}
}
{
auto const& device_name = ui_->sound_output_combo_box->currentText ();
if (device_name != audio_output_device_.deviceName ())
{
auto const& default_device = QAudioDeviceInfo::defaultOutputDevice ();
if (device_name == default_device.deviceName ())
{
audio_output_device_ = default_device;
}
else
{
bool found {false};
Q_FOREACH (auto const& d, QAudioDeviceInfo::availableDevices (QAudio::AudioOutput))
{
if (device_name == d.deviceName ())
{
audio_output_device_ = d;
found = true;
}
}
if (!found)
{
audio_output_device_ = default_device;
}
}
restart_sound_output_device_ = true;
}
}
if (audio_input_channel_ != static_cast<AudioDevice::Channel> (ui_->sound_input_channel_combo_box->currentIndex ()))
{
audio_input_channel_ = static_cast<AudioDevice::Channel> (ui_->sound_input_channel_combo_box->currentIndex ());
restart_sound_input_device_ = true;
}
Q_ASSERT (audio_input_channel_ <= AudioDevice::Right);
if (audio_output_channel_ != static_cast<AudioDevice::Channel> (ui_->sound_output_channel_combo_box->currentIndex ()))
{
audio_output_channel_ = static_cast<AudioDevice::Channel> (ui_->sound_output_channel_combo_box->currentIndex ());
restart_sound_output_device_ = true;
}
Q_ASSERT (audio_output_channel_ <= AudioDevice::Both);
my_callsign_ = ui_->callsign_line_edit->text ();
my_grid_ = ui_->grid_line_edit->text ();
FD_exchange_= ui_->Field_Day_Exchange->text ().toUpper ();
RTTY_exchange_= ui_->RTTY_Exchange->text ().toUpper ();
spot_to_psk_reporter_ = ui_->psk_reporter_check_box->isChecked ();
id_interval_ = ui_->CW_id_interval_spin_box->value ();
ntrials_ = ui_->sbNtrials->value ();
txDelay_ = ui_->sbTxDelay->value ();
aggressive_ = ui_->sbAggressive->value ();
degrade_ = ui_->sbDegrade->value ();
RxBandwidth_ = ui_->sbBandwidth->value ();
id_after_73_ = ui_->CW_id_after_73_check_box->isChecked ();
tx_QSY_allowed_ = ui_->tx_QSY_check_box->isChecked ();
monitor_off_at_startup_ = ui_->monitor_off_check_box->isChecked ();
monitor_last_used_ = ui_->monitor_last_used_check_box->isChecked ();
type_2_msg_gen_ = static_cast<Type2MsgGen> (ui_->type_2_msg_gen_combo_box->currentIndex ());
log_as_RTTY_ = ui_->log_as_RTTY_check_box->isChecked ();
report_in_comments_ = ui_->report_in_comments_check_box->isChecked ();
prompt_to_log_ = ui_->prompt_to_log_check_box->isChecked ();
autoLog_ = ui_->cbAutoLog->isChecked();
decodes_from_top_ = ui_->decodes_from_top_check_box->isChecked ();
insert_blank_ = ui_->insert_blank_check_box->isChecked ();
DXCC_ = ui_->DXCC_check_box->isChecked ();
ppfx_ = ui_->ppfx_check_box->isChecked ();
clear_DX_ = ui_->clear_DX_check_box->isChecked ();
miles_ = ui_->miles_check_box->isChecked ();
quick_call_ = ui_->quick_call_check_box->isChecked ();
disable_TX_on_73_ = ui_->disable_TX_on_73_check_box->isChecked ();
force_call_1st_ = ui_->force_call_1st_check_box->isChecked ();
alternate_bindings_ = ui_->alternate_bindings_check_box->isChecked ();
watchdog_ = ui_->tx_watchdog_spin_box->value ();
TX_messages_ = ui_->TX_messages_check_box->isChecked ();
data_mode_ = static_cast<DataMode> (ui_->TX_mode_button_group->checkedId ());
bLowSidelobes_ = ui_->rbLowSidelobes->isChecked();
save_directory_ = ui_->save_path_display_label->text ();
azel_directory_ = ui_->azel_path_display_label->text ();
enable_VHF_features_ = ui_->enable_VHF_features_check_box->isChecked ();
decode_at_52s_ = ui_->decode_at_52s_check_box->isChecked ();
single_decode_ = ui_->single_decode_check_box->isChecked ();
twoPass_ = ui_->cbTwoPass->isChecked ();
bSpecialOp_ = ui_->gbSpecialOpActivity->isChecked ();
SelectedActivity_ = ui_->special_op_activity_button_group->checkedId();
x2ToneSpacing_ = ui_->cbx2ToneSpacing->isChecked ();
x4ToneSpacing_ = ui_->cbx4ToneSpacing->isChecked ();
calibration_.intercept = ui_->calibration_intercept_spin_box->value ();
calibration_.slope_ppm = ui_->calibration_slope_ppm_spin_box->value ();
pwrBandTxMemory_ = ui_->checkBoxPwrBandTxMemory->isChecked ();
pwrBandTuneMemory_ = ui_->checkBoxPwrBandTuneMemory->isChecked ();
opCall_=ui_->opCallEntry->text();
auto new_server = ui_->udp_server_line_edit->text ();
if (new_server != udp_server_name_)
{
udp_server_name_ = new_server;
Q_EMIT self_->udp_server_changed (new_server);
}
auto new_port = ui_->udp_server_port_spin_box->value ();
if (new_port != udp_server_port_)
{
udp_server_port_ = new_port;
Q_EMIT self_->udp_server_port_changed (new_port);
}
accept_udp_requests_ = ui_->accept_udp_requests_check_box->isChecked ();
n1mm_server_name_ = ui_->n1mm_server_name_line_edit->text ();
n1mm_server_port_ = ui_->n1mm_server_port_spin_box->value ();
broadcast_to_n1mm_ = ui_->enable_n1mm_broadcast_check_box->isChecked ();
udpWindowToFront_ = ui_->udpWindowToFront->isChecked ();
udpWindowRestore_ = ui_->udpWindowRestore->isChecked ();
if (macros_.stringList () != next_macros_.stringList ())
{
macros_.setStringList (next_macros_.stringList ());
}
region_ = IARURegions::value (ui_->region_combo_box->currentText ());
if (frequencies_.frequency_list () != next_frequencies_.frequency_list ())
{
frequencies_.frequency_list (next_frequencies_.frequency_list ());
frequencies_.sort (FrequencyList_v2::frequency_column);
}
if (stations_.station_list () != next_stations_.station_list ())
{
stations_.station_list (next_stations_.station_list ());
stations_.sort (StationList::band_column);
}
if (decode_highlighing_model_.items () != next_decode_highlighing_model_.items ())
{
decode_highlighing_model_.items (next_decode_highlighing_model_.items ());
Q_EMIT self_->decode_highlighting_changed (decode_highlighing_model_);
}
highlight_by_mode_ = ui_->highlight_by_mode_check_box->isChecked ();
include_WAE_entities_ = ui_->include_WAE_check_box->isChecked ();
LotW_days_since_upload_ = ui_->LotW_days_since_upload_spin_box->value ();
lotw_users_.set_age_constraint (LotW_days_since_upload_);
if (ui_->use_dynamic_grid->isChecked() && !use_dynamic_grid_ )
{
// turning on so clear it so only the next location update gets used
dynamic_grid_.clear ();
}
use_dynamic_grid_ = ui_->use_dynamic_grid->isChecked();
write_settings (); // make visible to all
}
void Configuration::impl::reject ()
{
initialize_models (); // reverts to settings as at exec ()
// check if the Transceiver instance changed, in which case we need
// to re open any prior Transceiver type
if (rig_changed_)
{
if (have_rig_)
{
// we have to do this since the rig has been opened since we
// were exec'ed even though it might fail
open_rig ();
}
else
{
close_rig ();
}
}
QDialog::reject ();
}
void Configuration::impl::on_font_push_button_clicked ()
{
next_font_ = QFontDialog::getFont (0, next_font_, this);
}
void Configuration::impl::on_reset_highlighting_to_defaults_push_button_clicked (bool /*checked*/)
{
if (MessageBox::Yes == MessageBox::query_message (this
, tr ("Reset Decode Highlighting")
, tr ("Reset all decode highlighting and priorities to default values")))
{
next_decode_highlighing_model_.items (DecodeHighlightingModel::default_items ());
}
}
void Configuration::impl::on_rescan_log_push_button_clicked (bool /*clicked*/)
{
if (logbook_) logbook_->rescan ();
}
void Configuration::impl::on_LotW_CSV_fetch_push_button_clicked (bool /*checked*/)
{
lotw_users_.load (ui_->LotW_CSV_URL_line_edit->text (), true, true);
ui_->LotW_CSV_fetch_push_button->setEnabled (false);
}
void Configuration::impl::on_decoded_text_font_push_button_clicked ()
{
next_decoded_text_font_ = QFontDialog::getFont (0, decoded_text_font_ , this
, tr ("WSJT-X Decoded Text Font Chooser")
, QFontDialog::MonospacedFonts
);
}
void Configuration::impl::on_PTT_port_combo_box_activated (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_port_combo_box_activated (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_serial_baud_combo_box_currentIndexChanged (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_handshake_button_group_buttonClicked (int /* id */)
{
set_rig_invariants ();
}
void Configuration::impl::on_rig_combo_box_currentIndexChanged (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_data_bits_button_group_buttonClicked (int /* id */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_stop_bits_button_group_buttonClicked (int /* id */)
{
set_rig_invariants ();
}
void Configuration::impl::on_CAT_poll_interval_spin_box_valueChanged (int /* value */)
{
set_rig_invariants ();
}
void Configuration::impl::on_split_mode_button_group_buttonClicked (int /* id */)
{
set_rig_invariants ();
}
void Configuration::impl::on_test_CAT_push_button_clicked ()
{
if (!validate ())
{
return;
}
ui_->test_CAT_push_button->setStyleSheet ({});
if (open_rig (true))
{
//Q_EMIT sync (true);
}
set_rig_invariants ();
}
void Configuration::impl::on_test_PTT_push_button_clicked (bool checked)
{
ui_->test_PTT_push_button->setChecked (!checked); // let status
// update check us
if (!validate ())
{
return;
}
if (open_rig ())
{
Q_EMIT self_->transceiver_ptt (checked);
}
}
void Configuration::impl::on_force_DTR_combo_box_currentIndexChanged (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_force_RTS_combo_box_currentIndexChanged (int /* index */)
{
set_rig_invariants ();
}
void Configuration::impl::on_PTT_method_button_group_buttonClicked (int /* id */)
{
set_rig_invariants ();
}
void Configuration::impl::on_sound_input_combo_box_currentTextChanged (QString const& text)
{
default_audio_input_device_selected_ = QAudioDeviceInfo::defaultInputDevice ().deviceName () == text;
}
void Configuration::impl::on_sound_output_combo_box_currentTextChanged (QString const& text)
{
default_audio_output_device_selected_ = QAudioDeviceInfo::defaultOutputDevice ().deviceName () == text;
}
void Configuration::impl::on_add_macro_line_edit_editingFinished ()
{
ui_->add_macro_line_edit->setText (ui_->add_macro_line_edit->text ().toUpper ());
}
void Configuration::impl::on_delete_macro_push_button_clicked (bool /* checked */)
{
auto selection_model = ui_->macros_list_view->selectionModel ();
if (selection_model->hasSelection ())
{
// delete all selected items
delete_selected_macros (selection_model->selectedRows ());
}
}
void Configuration::impl::delete_macro ()
{
auto selection_model = ui_->macros_list_view->selectionModel ();
if (!selection_model->hasSelection ())
{
// delete item under cursor if any
auto index = selection_model->currentIndex ();
if (index.isValid ())
{
next_macros_.removeRow (index.row ());
}
}
else
{
// delete the whole selection
delete_selected_macros (selection_model->selectedRows ());
}
}
void Configuration::impl::delete_selected_macros (QModelIndexList selected_rows)
{
// sort in reverse row order so that we can delete without changing
// indices underneath us
std::sort (selected_rows.begin (), selected_rows.end (), [] (QModelIndex const& lhs, QModelIndex const& rhs)
{
return rhs.row () < lhs.row (); // reverse row ordering
});
// now delete them
Q_FOREACH (auto index, selected_rows)
{
next_macros_.removeRow (index.row ());
}
}
void Configuration::impl::on_add_macro_push_button_clicked (bool /* checked */)
{
if (next_macros_.insertRow (next_macros_.rowCount ()))
{
auto index = next_macros_.index (next_macros_.rowCount () - 1);
ui_->macros_list_view->setCurrentIndex (index);
next_macros_.setData (index, ui_->add_macro_line_edit->text ());
ui_->add_macro_line_edit->clear ();
}
}
void Configuration::impl::delete_frequencies ()
{
auto selection_model = ui_->frequencies_table_view->selectionModel ();
selection_model->select (selection_model->selection (), QItemSelectionModel::SelectCurrent | QItemSelectionModel::Rows);
next_frequencies_.removeDisjointRows (selection_model->selectedRows ());
ui_->frequencies_table_view->resizeColumnToContents (FrequencyList_v2::mode_column);
}
void Configuration::impl::load_frequencies ()
{
auto file_name = QFileDialog::getOpenFileName (this, tr ("Load Working Frequencies"), writeable_data_dir_.absolutePath (), tr ("Frequency files (*.qrg);;All files (*.*)"));
if (!file_name.isNull ())
{
auto const list = read_frequencies_file (file_name);
if (list.size ()
&& (!next_frequencies_.frequency_list ().size ()
|| MessageBox::Yes == MessageBox::query_message (this
, tr ("Replace Working Frequencies")
, tr ("Are you sure you want to discard your current "
"working frequencies and replace them with the "
"loaded ones?"))))
{
next_frequencies_.frequency_list (list); // update the model
}
}
}
void Configuration::impl::merge_frequencies ()
{
auto file_name = QFileDialog::getOpenFileName (this, tr ("Merge Working Frequencies"), writeable_data_dir_.absolutePath (), tr ("Frequency files (*.qrg);;All files (*.*)"));
if (!file_name.isNull ())
{
next_frequencies_.frequency_list_merge (read_frequencies_file (file_name)); // update the model
}
}
FrequencyList_v2::FrequencyItems Configuration::impl::read_frequencies_file (QString const& file_name)
{
QFile frequencies_file {file_name};
frequencies_file.open (QFile::ReadOnly);
QDataStream ids {&frequencies_file};
FrequencyList_v2::FrequencyItems list;
quint32 magic;
ids >> magic;
if (qrg_magic != magic)
{
MessageBox::warning_message (this, tr ("Not a valid frequencies file"), tr ("Incorrect file magic"));
return list;
}
quint32 version;
ids >> version;
// handle version checks and QDataStream version here if
// necessary
if (version > qrg_version)
{
MessageBox::warning_message (this, tr ("Not a valid frequencies file"), tr ("Version is too new"));
return list;
}
// de-serialize the data using version if necessary to
// handle old schemata
ids >> list;
if (ids.status () != QDataStream::Ok || !ids.atEnd ())
{
MessageBox::warning_message (this, tr ("Not a valid frequencies file"), tr ("Contents corrupt"));
list.clear ();
return list;
}
return list;
}
void Configuration::impl::save_frequencies ()
{
auto file_name = QFileDialog::getSaveFileName (this, tr ("Save Working Frequencies"), writeable_data_dir_.absolutePath (), tr ("Frequency files (*.qrg);;All files (*.*)"));
if (!file_name.isNull ())
{
QFile frequencies_file {file_name};
frequencies_file.open (QFile::WriteOnly);
QDataStream ods {&frequencies_file};
auto selection_model = ui_->frequencies_table_view->selectionModel ();
if (selection_model->hasSelection ()
&& MessageBox::Yes == MessageBox::query_message (this
, tr ("Only Save Selected Working Frequencies")
, tr ("Are you sure you want to save only the "
"working frequencies that are currently selected? "
"Click No to save all.")))
{
selection_model->select (selection_model->selection (), QItemSelectionModel::SelectCurrent | QItemSelectionModel::Rows);
ods << qrg_magic << qrg_version << next_frequencies_.frequency_list (selection_model->selectedRows ());
}
else
{
ods << qrg_magic << qrg_version << next_frequencies_.frequency_list ();
}
}
}
void Configuration::impl::reset_frequencies ()
{
if (MessageBox::Yes == MessageBox::query_message (this, tr ("Reset Working Frequencies")
, tr ("Are you sure you want to discard your current "
"working frequencies and replace them with default "
"ones?")))
{
next_frequencies_.reset_to_defaults ();
}
}
void Configuration::impl::insert_frequency ()
{
if (QDialog::Accepted == frequency_dialog_->exec ())
{
ui_->frequencies_table_view->setCurrentIndex (next_frequencies_.add (frequency_dialog_->item ()));
ui_->frequencies_table_view->resizeColumnToContents (FrequencyList_v2::mode_column);
}
}
void Configuration::impl::delete_stations ()
{
auto selection_model = ui_->stations_table_view->selectionModel ();
selection_model->select (selection_model->selection (), QItemSelectionModel::SelectCurrent | QItemSelectionModel::Rows);
next_stations_.removeDisjointRows (selection_model->selectedRows ());
ui_->stations_table_view->resizeColumnToContents (StationList::band_column);
ui_->stations_table_view->resizeColumnToContents (StationList::offset_column);
}
void Configuration::impl::insert_station ()
{
if (QDialog::Accepted == station_dialog_->exec ())
{
ui_->stations_table_view->setCurrentIndex (next_stations_.add (station_dialog_->station ()));
ui_->stations_table_view->resizeColumnToContents (StationList::band_column);
ui_->stations_table_view->resizeColumnToContents (StationList::offset_column);
}
}
void Configuration::impl::on_save_path_select_push_button_clicked (bool /* checked */)
{
QFileDialog fd {this, tr ("Save Directory"), ui_->save_path_display_label->text ()};
fd.setFileMode (QFileDialog::Directory);
fd.setOption (QFileDialog::ShowDirsOnly);
if (fd.exec ())
{
if (fd.selectedFiles ().size ())
{
ui_->save_path_display_label->setText (fd.selectedFiles ().at (0));
}
}
}
void Configuration::impl::on_azel_path_select_push_button_clicked (bool /* checked */)
{
QFileDialog fd {this, tr ("AzEl Directory"), ui_->azel_path_display_label->text ()};
fd.setFileMode (QFileDialog::Directory);
fd.setOption (QFileDialog::ShowDirsOnly);
if (fd.exec ()) {
if (fd.selectedFiles ().size ()) {
ui_->azel_path_display_label->setText(fd.selectedFiles().at(0));
}
}
}
void Configuration::impl::on_calibration_intercept_spin_box_valueChanged (double)
{
rig_active_ = false; // force reset
}
void Configuration::impl::on_calibration_slope_ppm_spin_box_valueChanged (double)
{
rig_active_ = false; // force reset
}
void Configuration::impl::on_prompt_to_log_check_box_clicked(bool checked)
{
if(checked) ui_->cbAutoLog->setChecked(false);
}
void Configuration::impl::on_cbAutoLog_clicked(bool checked)
{
if(checked) ui_->prompt_to_log_check_box->setChecked(false);
}
void Configuration::impl::on_cbx2ToneSpacing_clicked(bool b)
{
if(b) ui_->cbx4ToneSpacing->setChecked(false);
}
void Configuration::impl::on_cbx4ToneSpacing_clicked(bool b)
{
if(b) ui_->cbx2ToneSpacing->setChecked(false);
}
void Configuration::impl::on_Field_Day_Exchange_textEdited (QString const& exchange)
{
auto text = exchange.simplified ().toUpper ();
auto class_pos = text.indexOf (QRegularExpression {R"([A-H])"});
if (class_pos >= 0 && text.size () >= class_pos + 2 && text.at (class_pos + 1) != QChar {' '})
{
text.insert (class_pos + 1, QChar {' '});
}
ui_->Field_Day_Exchange->setText (text);
}
void Configuration::impl::on_RTTY_Exchange_textEdited (QString const& exchange)
{
ui_->RTTY_Exchange->setText (exchange.toUpper ());
}
bool Configuration::impl::have_rig ()
{
if (!open_rig ())
{
MessageBox::critical_message (this, tr ("Rig control error")
, tr ("Failed to open connection to rig"));
}
return rig_active_;
}
bool Configuration::impl::open_rig (bool force)
{
auto result = false;
auto const rig_data = gather_rig_data ();
if (force || !rig_active_ || rig_data != saved_rig_params_)
{
try
{
close_rig ();
// create a new Transceiver object
auto rig = transceiver_factory_.create (rig_data, transceiver_thread_);
cached_rig_state_ = Transceiver::TransceiverState {};
// hook up Configuration transceiver control signals to Transceiver slots
//
// these connections cross the thread boundary
rig_connections_ << connect (this, &Configuration::impl::set_transceiver,
rig.get (), &Transceiver::set);
// hook up Transceiver signals to Configuration signals
//
// these connections cross the thread boundary
rig_connections_ << connect (rig.get (), &Transceiver::resolution, this, [=] (int resolution) {
rig_resolution_ = resolution;
});
rig_connections_ << connect (rig.get (), &Transceiver::update, this, &Configuration::impl::handle_transceiver_update);
rig_connections_ << connect (rig.get (), &Transceiver::failure, this, &Configuration::impl::handle_transceiver_failure);
// setup thread safe startup and close down semantics
rig_connections_ << connect (this, &Configuration::impl::start_transceiver, rig.get (), &Transceiver::start);
rig_connections_ << connect (this, &Configuration::impl::stop_transceiver, rig.get (), &Transceiver::stop);
auto p = rig.release (); // take ownership
// schedule destruction on thread quit
connect (transceiver_thread_, &QThread::finished, p, &QObject::deleteLater);
// schedule eventual destruction for non-closing situations
//
// must be queued connection to avoid premature
// self-immolation since finished signal is going to be
// emitted from the object that will get destroyed in its
// own stop slot i.e. a same thread signal to slot
// connection which by default will be reduced to a method
// function call.
connect (p, &Transceiver::finished, p, &Transceiver::deleteLater, Qt::QueuedConnection);
ui_->test_CAT_push_button->setStyleSheet ({});
rig_active_ = true;
Q_EMIT start_transceiver (++transceiver_command_number_); // start rig on its thread
result = true;
}
catch (std::exception const& e)
{
handle_transceiver_failure (e.what ());
}
saved_rig_params_ = rig_data;
rig_changed_ = true;
}
else
{
result = true;
}
return result;
}
void Configuration::impl::set_cached_mode ()
{
MODE mode {Transceiver::UNK};
// override cache mode with what we want to enforce which includes
// UNK (unknown) where we want to leave the rig mode untouched
switch (data_mode_)
{
case data_mode_USB: mode = Transceiver::USB; break;
case data_mode_data: mode = Transceiver::DIG_U; break;
default: break;
}
cached_rig_state_.mode (mode);
}
void Configuration::impl::transceiver_frequency (Frequency f)
{
cached_rig_state_.online (true); // we want the rig online
set_cached_mode ();
// apply any offset & calibration
// we store the offset here for use in feedback from the rig, we
// cannot absolutely determine if the offset should apply but by
// simply picking an offset when the Rx frequency is set and
// sticking to it we get sane behaviour
current_offset_ = stations_.offset (f);
cached_rig_state_.frequency (apply_calibration (f + current_offset_));
Q_EMIT set_transceiver (cached_rig_state_, ++transceiver_command_number_);
}
void Configuration::impl::transceiver_tx_frequency (Frequency f)
{
Q_ASSERT (!f || split_mode ());
if (split_mode ())
{
cached_rig_state_.online (true); // we want the rig online
set_cached_mode ();
cached_rig_state_.split (f);
cached_rig_state_.tx_frequency (f);
// lookup offset for tx and apply calibration
if (f)
{
// apply and offset and calibration
// we store the offset here for use in feedback from the
// rig, we cannot absolutely determine if the offset should
// apply but by simply picking an offset when the Rx
// frequency is set and sticking to it we get sane behaviour
current_tx_offset_ = stations_.offset (f);
cached_rig_state_.tx_frequency (apply_calibration (f + current_tx_offset_));
}
Q_EMIT set_transceiver (cached_rig_state_, ++transceiver_command_number_);
}
}
void Configuration::impl::transceiver_mode (MODE m)
{
cached_rig_state_.online (true); // we want the rig online
cached_rig_state_.mode (m);
Q_EMIT set_transceiver (cached_rig_state_, ++transceiver_command_number_);
}
void Configuration::impl::transceiver_ptt (bool on)
{
cached_rig_state_.online (true); // we want the rig online
set_cached_mode ();
cached_rig_state_.ptt (on);
Q_EMIT set_transceiver (cached_rig_state_, ++transceiver_command_number_);
}
void Configuration::impl::sync_transceiver (bool /*force_signal*/)
{
// pass this on as cache must be ignored
// Q_EMIT sync (force_signal);
}
void Configuration::impl::handle_transceiver_update (TransceiverState const& state,
unsigned sequence_number)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::handle_transceiver_update: Transceiver State #:" << sequence_number << state;
#endif
// only follow rig on some information, ignore other stuff
cached_rig_state_.online (state.online ());
cached_rig_state_.frequency (state.frequency ());
cached_rig_state_.mode (state.mode ());
cached_rig_state_.split (state.split ());
if (state.online ())
{
ui_->test_PTT_push_button->setChecked (state.ptt ());
if (isVisible ())
{
ui_->test_CAT_push_button->setStyleSheet ("QPushButton {background-color: green;}");
auto const& rig = ui_->rig_combo_box->currentText ();
auto ptt_method = static_cast<TransceiverFactory::PTTMethod> (ui_->PTT_method_button_group->checkedId ());
auto CAT_PTT_enabled = transceiver_factory_.has_CAT_PTT (rig);
ui_->test_PTT_push_button->setEnabled ((TransceiverFactory::PTT_method_CAT == ptt_method && CAT_PTT_enabled)
|| TransceiverFactory::PTT_method_DTR == ptt_method
|| TransceiverFactory::PTT_method_RTS == ptt_method);
}
}
else
{
close_rig ();
}
// pass on to clients if current command is processed
if (sequence_number == transceiver_command_number_)
{
TransceiverState reported_state {state};
// take off calibration & offset
reported_state.frequency (remove_calibration (reported_state.frequency ()) - current_offset_);
if (reported_state.tx_frequency ())
{
// take off calibration & offset
reported_state.tx_frequency (remove_calibration (reported_state.tx_frequency ()) - current_tx_offset_);
}
Q_EMIT self_->transceiver_update (reported_state);
}
}
void Configuration::impl::handle_transceiver_failure (QString const& reason)
{
#if WSJT_TRACE_CAT
qDebug () << "Configuration::handle_transceiver_failure: reason:" << reason;
#endif
close_rig ();
ui_->test_PTT_push_button->setChecked (false);
if (isVisible ())
{
MessageBox::critical_message (this, tr ("Rig failure"), reason);
}
else
{
// pass on if our dialog isn't active
Q_EMIT self_->transceiver_failure (reason);
}
}
void Configuration::impl::close_rig ()
{
ui_->test_PTT_push_button->setEnabled (false);
// revert to no rig configured
if (rig_active_)
{
ui_->test_CAT_push_button->setStyleSheet ("QPushButton {background-color: red;}");
Q_EMIT stop_transceiver ();
for (auto const& connection: rig_connections_)
{
disconnect (connection);
}
rig_connections_.clear ();
rig_active_ = false;
}
}
// load the available audio devices into the selection combo box and
// select the default device if the current device isn't set or isn't
// available
bool Configuration::impl::load_audio_devices (QAudio::Mode mode, QComboBox * combo_box, QAudioDeviceInfo * device)
{
using std::copy;
using std::back_inserter;
bool result {false};
combo_box->clear ();
int current_index = -1;
int default_index = -1;
int extra_items {0};
auto const& default_device = (mode == QAudio::AudioInput ? QAudioDeviceInfo::defaultInputDevice () : QAudioDeviceInfo::defaultOutputDevice ());
// deal with special default audio devices on Windows
if ("Default Input Device" == default_device.deviceName ()
|| "Default Output Device" == default_device.deviceName ())
{
default_index = 0;
QList<QVariant> channel_counts;
auto scc = default_device.supportedChannelCounts ();
copy (scc.cbegin (), scc.cend (), back_inserter (channel_counts));
combo_box->addItem (default_device.deviceName (), channel_counts);
++extra_items;
if (default_device == *device)
{
current_index = 0;
result = true;
}
}
Q_FOREACH (auto const& p, QAudioDeviceInfo::availableDevices (mode))
{
// qDebug () << "Audio device: input:" << (QAudio::AudioInput == mode) << "name:" << p.deviceName () << "preferred format:" << p.preferredFormat () << "endians:" << p.supportedByteOrders () << "codecs:" << p.supportedCodecs () << "channels:" << p.supportedChannelCounts () << "rates:" << p.supportedSampleRates () << "sizes:" << p.supportedSampleSizes () << "types:" << p.supportedSampleTypes ();
// convert supported channel counts into something we can store in the item model
QList<QVariant> channel_counts;
auto scc = p.supportedChannelCounts ();
copy (scc.cbegin (), scc.cend (), back_inserter (channel_counts));
combo_box->addItem (p.deviceName (), channel_counts);
if (p == *device)
{
current_index = combo_box->count () - 1;
}
else if (p == default_device)
{
default_index = combo_box->count () - 1;
}
}
if (current_index < 0) // not found - use default
{
*device = default_device;
result = true;
current_index = default_index;
}
combo_box->setCurrentIndex (current_index);
return result;
}
// enable only the channels that are supported by the selected audio device
void Configuration::impl::update_audio_channels (QComboBox const * source_combo_box, int index, QComboBox * combo_box, bool allow_both)
{
// disable all items
for (int i (0); i < combo_box->count (); ++i)
{
combo_box->setItemData (i, combo_box_item_disabled, Qt::UserRole - 1);
}
Q_FOREACH (QVariant const& v, source_combo_box->itemData (index).toList ())
{
// enable valid options
int n {v.toInt ()};
if (2 == n)
{
combo_box->setItemData (AudioDevice::Left, combo_box_item_enabled, Qt::UserRole - 1);
combo_box->setItemData (AudioDevice::Right, combo_box_item_enabled, Qt::UserRole - 1);
if (allow_both)
{
combo_box->setItemData (AudioDevice::Both, combo_box_item_enabled, Qt::UserRole - 1);
}
}
else if (1 == n)
{
combo_box->setItemData (AudioDevice::Mono, combo_box_item_enabled, Qt::UserRole - 1);
}
}
}
// load all the supported rig names into the selection combo box
void Configuration::impl::enumerate_rigs ()
{
ui_->rig_combo_box->clear ();
auto rigs = transceiver_factory_.supported_transceivers ();
for (auto r = rigs.cbegin (); r != rigs.cend (); ++r)
{
if ("None" == r.key ())
{
// put None first
ui_->rig_combo_box->insertItem (0, r.key (), r.value ().model_number_);
}
else
{
int i;
for(i=1;i<ui_->rig_combo_box->count() && (r.key().toLower() > ui_->rig_combo_box->itemText(i).toLower());++i);
if (i < ui_->rig_combo_box->count()) ui_->rig_combo_box->insertItem (i, r.key (), r.value ().model_number_);
else ui_->rig_combo_box->addItem (r.key (), r.value ().model_number_);
}
}
ui_->rig_combo_box->setCurrentText (rig_params_.rig_name);
}
void Configuration::impl::fill_port_combo_box (QComboBox * cb)
{
auto current_text = cb->currentText ();
cb->clear ();
Q_FOREACH (auto const& p, QSerialPortInfo::availablePorts ())
{
if (!p.portName ().contains ( "NULL" )) // virtual serial port pairs
{
// remove possibly confusing Windows device path (OK because
// it gets added back by Hamlib)
cb->addItem (p.systemLocation ().remove (QRegularExpression {R"(^\\\\\.\\)"}));
auto tip = QString {"%1 %2 %3"}.arg (p.manufacturer ()).arg (p.serialNumber ()).arg (p.description ()).trimmed ();
if (tip.size ())
{
cb->setItemData (cb->count () - 1, tip, Qt::ToolTipRole);
}
}
}
cb->addItem ("USB");
cb->setItemData (cb->count () - 1, "Custom USB device", Qt::ToolTipRole);
cb->setEditText (current_text);
}
auto Configuration::impl::apply_calibration (Frequency f) const -> Frequency
{
if (frequency_calibration_disabled_) return f;
return std::llround (calibration_.intercept
+ (1. + calibration_.slope_ppm / 1.e6) * f);
}
auto Configuration::impl::remove_calibration (Frequency f) const -> Frequency
{
if (frequency_calibration_disabled_) return f;
return std::llround ((f - calibration_.intercept)
/ (1. + calibration_.slope_ppm / 1.e6));
}
ENUM_QDATASTREAM_OPS_IMPL (Configuration, DataMode);
ENUM_QDATASTREAM_OPS_IMPL (Configuration, Type2MsgGen);
ENUM_CONVERSION_OPS_IMPL (Configuration, DataMode);
ENUM_CONVERSION_OPS_IMPL (Configuration, Type2MsgGen);