WSJT-X/doc/source/example2-check-decodes.adoc
Greg Beam 46f6e3231b User Guide Updates
* Per Joe's request, use TIP v.s. NOTE:

Find [ NOTE: ] 
$ cd ./wsjtx/doc/source
$ grep ^NOTE: ./*
./doc/example1-decoding-overview.adoc:NOTE: .. ..
./doc/example2-check-decodes.adoc:NOTE: .. ..
./doc/example2-wave-2343.adoc:NOTE: .. ..
./quick-reference.adoc:NOTE: .. ..

Change [ NOTE: ] to [ TIP: ]
$ sed -i 's/NOTE:/TIP:/' ./example1-* ./example2-* ./quick-*

$ svn status
M       example1-decoding-overview.adoc
M       example2-check-decodes.adoc
M       example2-wave-2343.adoc
M       quick-reference.adoc

: Actions performed on @QX9770-SRV1/Win64 ==> Cygwin terminal


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3681 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-02-01 10:19:39 +00:00

36 lines
1.4 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// Status=review
- Double-click on the waterfall near 815 Hz: a signal originating
from W7VP will be decoded and appear in the Rx Frequency Box:
.W7VP Decode
[width="70%",cols="3,^3,^3,^4,^4,30",options="header"]
|=================================
|UTC|db|dt|Freq|Mode|Message
|2343|-7|0.3|815|#|KK4DSD W7VP -16
|=================================
- Double-click on the waterfall at 3196 Hz and the program will decode a JT9
message from IZ0MIT:
.IZ0MIT Decode
[width="70%",cols="3,^3,^3,^4,^4,30",options="header"]
|=====================================
|UTC|db|dt|Freq|Mode|Message
|2343|-7|0.3|3196|@|WB8QPG IZ0MIT -11
|=====================================
TIP: Notice that when a signal is decoded in this way the Tx mode
automatically switches to that of the decoded signal. The Rx and Tx
frequency markers on the waterfall scale resize themselves
accordingly.
- Scroll back in the Band Activity window (if necessary) and
double-click on the message CQ DL7ACA JO40. The program will set Tx
mode to JT65 and Tx and Rx frequencies to that of DL7ACA, 975 Hz. If
you had checked *Double-click on call sets Tx Enable* on the Setup menu,
the program would set up to start a QSO with DL7ACA.
- Double-click on the decoded JT65 message CQ TA4A KM37. The program
will set Tx mode to JT9 and the Rx and Tx frequencies to 3567 Hz.
Youre now configured properly for a JT9 QSO with TA4A.