WSJT-X/doc/user_guide/en/controls-functions-center.adoc
Joe Taylor ddeb1bab4e Many editorial changes to User Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7235 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 15:36:22 +00:00

39 lines
1.7 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// Status=review
At the center of the main window are a number of controls used when
making QSOs. Controls not relevant to a particular mode or submode
may be "grayed out" (disabled) or removed from the display.
//.Misc Controls Center
image::misc-controls-center.png[align="center",alt="Misc Controls Center"]
* Check *Tx even* to transmit in even-numbered UTC minutes or
sequences, starting at 0. Uncheck this box to transmit in the odd
sequences. The correct selection is made automatically when you
double-click on a decoded text line, as described in the
<<TUTORIAL,Basic Operating Tutorial>>.
* The Tx and Rx audio frequencies can be set automatically by
double-clicking on decoded text or a signal in the waterfall. They
can also be adjusted using the spinner controls.
* You can force Tx frequency to the current Rx frequency by clicking
the *Tx<-Rx* button, and vice-versa for *Rx<-Tx*. Check the box *Lock
Tx=Rx* to make the frequencies always track one another. The
on-the-air frequency of your lowest JT9 or JT65 tone is the sum of
dial frequency and audio Tx frequency.
TIP: In general we do not recommend using *Lock Tx=Rx* since it
encourages poor radio etiquette when running a frequency. With *Lock
Tx=Rx* checked, your own Tx frequency will move around following your
callers.
* The *Report* control lets you change a signal report that has been
inserted automatically. Typical reports for the various modes fall in
the range 30 to +20 dB. Remember that JT65 reports saturate at an
upper limit of -1 dB.
TIP: Consider reducing power if your QSO partner reports your
signal above -5 dB in one of the _WSJT-X_ slow modes. These are
supposed to be weak signal modes!