mirror of
https://github.com/saitohirga/WSJT-X.git
synced 2024-11-16 00:51:56 -05:00
ebc2cb2ffb
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5479 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
53 lines
2.9 KiB
Plaintext
53 lines
2.9 KiB
Plaintext
// Status=review
|
||
|
||
_WSJT-X_ is a computer program designed to facilitate basic amateur
|
||
radio communication using very weak signals. The first four letters in
|
||
the program name stand for “Weak Signal communication by K1JT,” while
|
||
the suffix “-X” indicates that _WSJT-X_ started as an extended (and
|
||
experimental) branch of the program _WSJT_.
|
||
|
||
_WSJT-X_ offers four protocols or “modes”: JT4, JT9, JT65 and WSPR.
|
||
The first three are designed for making reliable, confirmed QSOs under
|
||
extreme weak-signal conditions. They use nearly identical message
|
||
structure and source encoding. JT65 was designed for EME
|
||
(“moonbounce”) on the VHF/UHF bands and has also proven very effective
|
||
for worldwide QRP communication on the HF bands. JT9 is optimized for
|
||
the LF, MF, and lower HF bands. It is about 2 dB more sensitive than
|
||
JT65 while using less than 10% of the bandwidth. JT4 offers a wide
|
||
variety of tone spacings and has proved very effective for EME on
|
||
microwave bands up to 24 GHz. All three of these modes use one-minute
|
||
timed sequences of alternating transmission and reception, so a
|
||
minimal QSO takes four to six minutes — two or three transmissions by
|
||
each station, one sending in odd UTC minutes and the other even. On
|
||
the HF bands, world-wide QSOs are possible using power levels of a few
|
||
watts and compromise antennas. On VHF bands and higher, QSOs are
|
||
possible (by EME and other propagation methods) at signal levels 10 to
|
||
15 dB below those required for CW.
|
||
|
||
WSPR (pronounced “whisper”) stands for Weak Signal Propagation
|
||
Reporter. The WSPR protocol was designed for probing potential
|
||
propagation paths using low-power transmissions. WSPR messages
|
||
normally carry the transmitting station’s callsign, grid locator, and
|
||
transmitter power in dBm, and they can be decoded at signal-to-noise
|
||
ratios as low as -28 dB in a 2500 Hz bandwidth. WSPR users with
|
||
internet access can automatically upload their reception reports to a
|
||
central database called {wsprnet} that provides a mapping facility,
|
||
archival storage, and many other features.
|
||
|
||
_WSJT-X_ provides spectral displays for passbands up to 5 kHz,
|
||
flexible rig control for nearly all modern radios used by amateurs,
|
||
and a wide variety of special aids such as automatic Doppler control
|
||
for EME QSOs. The program runs equally well on Windows, Macintosh,
|
||
and Linux systems, and installation packages are available for all
|
||
three platforms.
|
||
|
||
_WSJT-X_ is an open-source project released under the {gnu_gpl}
|
||
(GPL). If you have programming or documentation skills or would like
|
||
to contribute to the project in other ways, please make your interests
|
||
known to the development team. The project’s source-code repository
|
||
can be found at {devsvn}, and most communication among the developers
|
||
takes place on the email reflector {devmail}. User-level questions
|
||
and answers, and general communication among users is found on the
|
||
{wsjt_yahoo_group} email reflector.
|
||
|