mirror of
https://github.com/saitohirga/WSJT-X.git
synced 2024-11-21 19:55:20 -05:00
1a23757b26
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6122 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
40 lines
1.6 KiB
Plaintext
40 lines
1.6 KiB
Plaintext
Before using the new "CQ nnn ..." feature in JTMSK mode, I suggest
|
|
performing the following tests of the necessary CAT control for your
|
|
radio. (I'm assuming that you already have some experience with
|
|
JTMSK.)
|
|
|
|
TEST 1:
|
|
--------------------------------------------------------------------------
|
|
1. Start WSJT-X
|
|
2. Settings: "Enable VHF/UHF/Microwave features, "Rx frequency offset
|
|
with 'CQ nnn ...'", Split=Rig, or Split="Fake it"
|
|
3. Main screen settings: Band=50.280, mode=JTMSK, T/R=15 s
|
|
4. Activate CQRx, set CQ Rx=265
|
|
==> Rx dial should now read 50.265 and Tx6 should be queued
|
|
5. Click "Enable Tx"
|
|
==> Tx sequences should occur at 50.280, Rx at 50.265
|
|
|
|
With most rigs, this test should work with Split configured as either
|
|
"Rig" or "Fake it".
|
|
|
|
TEST 2:
|
|
--------------------------------------------------------------------------
|
|
1. Start WSJT-X
|
|
2. Settings: MyCall=K1JT, "Enable VHF/UHF/Microwave features,
|
|
"Rx frequency offset with 'CQ nnn ...'", Split=Rig or "Fake it"
|
|
4. Main screen settings: Band=50.280, mode=JTMSK, T/R=15 s
|
|
5. Open file 150826_120515.wav
|
|
==> see decoded message "K1JT VE1SKY FN74"
|
|
6. Click "Monitor" to restart monitoring
|
|
7. Activate CQRx, set CQ Rx=265
|
|
==> Rx dial should now read 50.265; Tx6 should be queued
|
|
8. Click "Enable Tx"
|
|
==> Tx sequences should occur at 50.280, Rx at 50.265
|
|
9. After the start of a transmission, double-click on the decoded message
|
|
"K1JT VE1SKY FN74"
|
|
==> Tx2 should be generated and queued; transmission will pause
|
|
briefly, Tx freq changed to 50.265, then Tx resumed.
|
|
|
|
The test file is posted at
|
|
http://physics.princeton.edu/pulsar/K1JT/150826_120515.wav
|