WSJT-X/fivehz.f90
Joe Taylor d462134d7e Tweaked ibuf0 in fivehz.f90 to give DT=0 with local SimJT.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/trunk@88 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2006-01-11 20:17:51 +00:00

212 lines
5.1 KiB
Fortran

subroutine fivehz
! Called at interrupt level from the PortAudio callback routine.
! For nspb=2048 the callback rate is nfsample/nspb = 5.38 Hz.
! Thus, we should be able to control the timing of T/R sequence events
! here to within about 0.2 s.
! Do not do anything very time consuming in this routine!!
! Disk I/O is a bad idea. Writing to stdout (for diagnostic purposes)
! seems to be OK.
#ifdef Win32
use dflib
use dfport
#endif
real*8 tstart,tstop,t60
logical first,txtime,debug
integer ptt
integer TxOKz
real*8 fs,fsample,tt,tt0,u
include 'gcom1.f90'
include 'gcom2.f90'
data first/.true./,nc0/1/,nc1/1/
save
n1=time()
n2=mod(n1,86400)
tt=n1-n2+tsec-0.1d0*ndsec
if(first) then
rxdelay=0.2
txdelay=0.2
tlatency=3*2048/11025.0
first=.false.
iptt=0
ntr0=-99
debug=.false.
rxdone=.false.
ibuf00=-99
ncall=-1
tt0=tt
u=0.1d0
fsample=11025.d0
maxms=0
mfsample=110250
endif
if(txdelay.lt.0.2d0) txdelay=0.2d0
! Measure average sampling frequency over a recent interval
ncall=ncall+1
if(ncall.eq.9) tt0=tt
if(ncall.ge.10 .and. mod(ncall,2).eq.1) then
fs=(ncall-9)*2048.d0/(tt-tt0)
fsample=u*fs + (1.d0-u)*fsample
mfsample=nint(10.d0*fsample)
endif
if(trperiod.le.0) trperiod=30
tx1=0.0 !Time to start a TX sequence
tx2=trperiod-(tlatency+txdelay) !Time to turn TX off
if(mode(1:4).eq.'JT65') then
if(nwave.lt.126*4096) nwave=126*4096
tx2=nwave/11025.0
endif
if(TxFirst.eq.0) then
tx1=tx1+trperiod
tx2=tx2+trperiod
endif
t=mod(Tsec,2.d0*trperiod)
txtime = t.ge.tx1 .and. t.lt.tx2
! If we're transmitting, freeze the input buffer pointers where they were.
receiving=1
if(((txtime .and. (lauto.eq.1)) .or. TxOK.eq.1 .or. transmitting.eq.1) &
.and. (mute.eq.0)) then
receiving=0
ibuf=ibuf000
iwrite=iwrite000
endif
ibuf000=ibuf
iwrite000=iwrite
nsec=Tsec
ntr=mod(nsec/trperiod,2) !ntr=0 in 1st sequence, 1 in 2nd
if(ntr.ne.ntr0) then
ibuf0=ibuf !Start of new sequence, save ibuf
ibuf0=ibuf0-3 !Tweak the Rx start time
if(ibuf0.lt.1) ibuf0=ibuf0+1024
! if(mode(1:4).ne.'JT65') then
! ibuf0=ibuf0+3 !So we don't copy our own Tx
! if(ibuf0.gt.1024) ibuf0=ibuf0-1024
! endif
ntime=time() !Save start time
if(mantx.eq.1 .and. iptt.eq.1) then
mantx=0
TxOK=0
endif
endif
! Switch PTT line and TxOK appropriately
if(lauto.eq.1) then
if(txtime .and. iptt.eq.0 .and. &
mute.eq.0) i1=ptt(nport,1,iptt) !Raise PTT
if(.not.txtime .or. mute.eq.1) TxOK=0 !Lower TxOK
else
if(mantx.eq.1 .and. iptt.eq.0 .and. &
mute.eq.0) i2=ptt(nport,1,iptt) !Raise PTT
if(mantx.eq.0 .or. mute.eq.1) TxOK=0 !Lower TxOK
endif
! Calculate Tx waveform as needed
if((iptt.eq.1 .and. iptt0.eq.0) .or. nrestart.eq.1) then
call wsjtgen
nrestart=0
endif
! If PTT was just raised, start a countdown for raising TxOK:
nc1a=txdelay/0.18576
if(nc1a.lt.2) nc1a=2
if(mode(1:4).eq.'JT65') nc1a=2 !No extra delay for JT65
if(iptt.eq.1 .and. iptt0.eq.0) nc1=-nc1a
if(nc1.le.0) nc1=nc1+1
if(nc1.eq.0) TxOK=1 ! We are transmitting
! If TxOK was just lowered, start a countdown for lowering PTT:
nc0a=txdelay/0.18576
if(nc0a.lt.4) nc0a=4
if(TxOK.eq.0 .and. TxOKz.eq.1 .and. iptt.eq.1) nc0=-nc0a
if(nc0.le.0) nc0=nc0+1
if(nc0.eq.0) i3=ptt(nport,0,iptt)
if(iptt.eq.0 .and.TxOK.eq.0) then
sending=" "
sendingsh=0
endif
nbufs=ibuf-ibuf0
if(nbufs.lt.0) nbufs=nbufs+1024
tdata=nbufs*2048.0/11025.0
if(mode(1:4).eq.'JT65' .and. monitoring.eq.1 .and. tdata.gt.53.0 &
.and. ibuf0.ne.ibuf00) then
rxdone=.true.
ibuf00=ibuf0
endif
! if(ndebug.ne.0) then
! t60=mod(tsec,60.d0)
! if(iptt.ne.iptt0) then
! if(iptt.eq.1) tstart=tsec
! if(iptt.eq.0) write(*,1101) tsec-tstop,t60
!1101 format('Delay from TxOFF to PTT was',f6.2,' s at t=',f6.2)
! endif
! if(TxOK.ne.TxOKz) then
! if(TxOK.eq.0) tstop=tsec
! if(TxOK.eq.1) write(*,1102) tsec-tstart,t60
!1102 format('Delay from PTT to TxON was ',f6.2,' s at t=',f6.2)
! endif
! endif
iptt0=iptt
TxOKz=TxOK
ntr0=ntr
return
end subroutine fivehz
subroutine fivehztx
! Called at interrupt level from the PortAudio output callback.
#ifdef Win32
use dflib
use dfport
#endif
logical first
real*8 fs,fsample,tt,tt0,u
include 'gcom1.f90'
data first/.true./
save
n1=time()
n2=mod(n1,86400)
tt=n1-n2+tsec-0.1d0*ndsec
if(first) then
first=.false.
ncall=-1
fsample=11025.d0
nsec0=-999
u=0.1d0
mfsample2=110250
tt0=tt
endif
ncall=ncall+1
if(ncall.eq.9) tt0=tt
if(ncall.ge.10 .and. mod(ncall,2).eq.1) then
fs=(ncall-9)*2048.d0/(tt-tt0)
fsample=u*fs + (1.d0-u)*fsample
mfsample2=nint(10.d0*fsample)
endif
return
end subroutine fivehztx