WSJT-X/lib/decoder.f90
Joe Taylor e212367221 First decodes of wide/slow JT9 submodes from within wsjtx.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6577 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-05 14:17:34 +00:00

296 lines
9.7 KiB
Fortran

subroutine multimode_decoder(ss,id2,params,nfsample)
!$ use omp_lib
use prog_args
use timer_module, only: timer
use jt4_decode
use jt65_decode
use jt9_decode
include 'jt9com.f90'
include 'timer_common.inc'
type, extends(jt4_decoder) :: counting_jt4_decoder
integer :: decoded
end type counting_jt4_decoder
type, extends(jt65_decoder) :: counting_jt65_decoder
integer :: decoded
end type counting_jt65_decoder
type, extends(jt9_decoder) :: counting_jt9_decoder
integer :: decoded
end type counting_jt9_decoder
real ss(184,NSMAX)
logical baddata,newdat65,newdat9
integer*2 id2(NTMAX*12000)
type(params_block) :: params
real*4 dd(NTMAX*12000)
save
type(counting_jt4_decoder) :: my_jt4
type(counting_jt65_decoder) :: my_jt65
type(counting_jt9_decoder) :: my_jt9
if(mod(params%nranera,2).eq.0) ntrials=10**(params%nranera/2)
if(mod(params%nranera,2).eq.1) ntrials=3*10**(params%nranera/2)
if(params%nranera.eq.0) ntrials=0
rms=sqrt(dot_product(float(id2(300000:310000)), &
float(id2(300000:310000)))/10000.0)
if(rms.lt.2.0) go to 800
if (params%nagain) then
open(13,file=trim(temp_dir)//'/decoded.txt',status='unknown', &
position='append')
else
open(13,file=trim(temp_dir)//'/decoded.txt',status='unknown')
end if
if(params%nmode.eq.4 .or. params%nmode.eq.65) open(14,file=trim(temp_dir)//'/avemsg.txt', &
status='unknown')
if(params%nmode.eq.4) then
jz=52*nfsample
if(params%newdat) then
if(nfsample.eq.12000) call wav11(id2,jz,dd)
if(nfsample.eq.11025) dd(1:jz)=id2(1:jz)
endif
call my_jt4%decode(jt4_decoded,dd,jz,params%nutc,params%nfqso,params%ntol, &
params%emedelay,params%dttol,logical(params%nagain),params%ndepth, &
params%nclearave,params%minsync,params%minw,params%nsubmode,params%mycall, &
params%hiscall,params%hisgrid,params%nlist,params%listutc,jt4_average)
go to 800
endif
npts65=52*12000
if(baddata(id2,npts65)) then
nsynced=0
ndecoded=0
go to 800
endif
ntol65=params%ntol !### is this OK? ###
newdat65=params%newdat
newdat9=params%newdat
!$call omp_set_dynamic(.true.)
!$omp parallel sections num_threads(2) copyin(/timer_private/) shared(ndecoded) if(.true.) !iif() needed on Mac
!$omp section
if(params%nmode.eq.65 .or. (params%nmode.eq.(65+9) .and. params%ntxmode.eq.65)) then
! We're in JT65 mode, or should do JT65 first
if(newdat65) dd(1:npts65)=id2(1:npts65)
nf1=params%nfa
nf2=params%nfb
call timer('jt65a ',0)
call my_jt65%decode(jt65_decoded,dd,npts65,newdat65,params%nutc, &
nf1,nf2,params%nfqso,ntol65,params%nsubmode,params%minsync, &
logical(params%nagain),params%n2pass,logical(params%nrobust), &
ntrials,params%naggressive,params%ndepth,params%nclearave, &
params%mycall,params%hiscall,params%hisgrid,params%nexp_decode)
call timer('jt65a ',1)
else if(params%nmode.eq.9 .or. (params%nmode.eq.(65+9) .and. params%ntxmode.eq.9)) then
! We're in JT9 mode, or should do JT9 first
call timer('decjt9 ',0)
call my_jt9%decode(jt9_decoded,ss,id2,params%nutc,params%nfqso, &
newdat9,params%npts8,params%nfa,params%nfsplit,params%nfb, &
params%ntol,params%nzhsym,logical(params%nagain),params%ndepth, &
params%nmode,params%nsubmode,params%nexp_decode)
call timer('decjt9 ',1)
endif
!$omp section
if(params%nmode.eq.(65+9)) then !Do the other mode (we're in dual mode)
if (params%ntxmode.eq.9) then
if(newdat65) dd(1:npts65)=id2(1:npts65)
nf1=params%nfa
nf2=params%nfb
call timer('jt65a ',0)
call my_jt65%decode(jt65_decoded,dd,npts65,newdat65,params%nutc, &
nf1,nf2,params%nfqso,ntol65,params%nsubmode,params%minsync, &
logical(params%nagain),params%n2pass,logical(params%nrobust), &
ntrials,params%naggressive,params%ndepth,params%nclearave, &
params%mycall,params%hiscall,params%hisgrid,params%nexp_decode)
call timer('jt65a ',1)
else
call timer('decjt9 ',0)
call my_jt9%decode(jt9_decoded,ss,id2,params%nutc,params%nfqso, &
newdat9,params%npts8,params%nfa,params%nfsplit,params%nfb, &
params%ntol,params%nzhsym,logical(params%nagain), &
params%ndepth,params%nmode,params%nsubmode,params%nexp_decode)
call timer('decjt9 ',1)
end if
endif
!$omp end parallel sections
! JT65 is not yet producing info for nsynced, ndecoded.
ndecoded = my_jt4%decoded + my_jt65%decoded + my_jt9%decoded
800 write(*,1010) nsynced,ndecoded
1010 format('<DecodeFinished>',2i4)
call flush(6)
close(13)
if(params%nmode.eq.4 .or. params%nmode.eq.65) close(14)
return
contains
subroutine jt4_decoded(this,utc,snr,dt,freq,have_sync,sync,is_deep, &
decoded,qual,ich,is_average,ave)
implicit none
class(jt4_decoder), intent(inout) :: this
integer, intent(in) :: utc
integer, intent(in) :: snr
real, intent(in) :: dt
integer, intent(in) :: freq
logical, intent(in) :: have_sync
logical, intent(in) :: is_deep
character(len=1), intent(in) :: sync
character(len=22), intent(in) :: decoded
real, intent(in) :: qual
integer, intent(in) :: ich
logical, intent(in) :: is_average
integer, intent(in) :: ave
character*2 :: cqual
if (have_sync) then
if (int(qual).gt.0) then
write(cqual, '(i2)') int(qual)
if (ave.gt.0) then
write(*,1000) utc,snr,dt,freq,sync,decoded,cqual, &
char(ichar('A')+ich-1), ave
else
write(*,1000) utc,snr,dt,freq,sync,decoded,cqual, &
char(ichar('A')+ich-1)
end if
else
write(*,1000) utc,snr,dt,freq,sync,decoded,' *', &
char(ichar('A')+ich-1)
end if
else
write(*,1000) utc ,snr, dt, freq
end if
1000 format(i4.4,i4,f5.2,i5,1x,a1,1x,a22,a2,1x,a1,i3)
select type(this)
type is (counting_jt4_decoder)
this%decoded = this%decoded + 1
end select
end subroutine jt4_decoded
subroutine jt4_average (this, used, utc, sync, dt, freq, flip)
implicit none
class(jt4_decoder), intent(inout) :: this
logical, intent(in) :: used
integer, intent(in) :: utc
real, intent(in) :: sync
real, intent(in) :: dt
integer, intent(in) :: freq
logical, intent(in) :: flip
character(len=1) :: cused, csync
cused = '.'
csync = '*'
if (used) cused = '$'
if (flip) csync = '$'
write(14,1000) cused,utc,sync,dt,freq,csync
1000 format(a1,i5.4,f6.1,f6.2,i6,1x,a1)
end subroutine jt4_average
subroutine jt65_decoded(this,utc,sync,snr,dt,freq,drift,width,decoded0,ft, &
qual,nsmo,nsum,minsync,nsubmode,naggressive)
use jt65_decode
implicit none
class(jt65_decoder), intent(inout) :: this
integer, intent(in) :: utc
real, intent(in) :: sync
integer, intent(in) :: snr
real, intent(in) :: dt
integer, intent(in) :: freq
integer, intent(in) :: drift
real, intent(in) :: width
character(len=22), intent(in) :: decoded0
integer, intent(in) :: ft
integer, intent(in) :: qual
integer, intent(in) :: nsmo
integer, intent(in) :: nsum
integer, intent(in) :: minsync
integer, intent(in) :: nsubmode
integer, intent(in) :: naggressive
integer nft,nsmo2,nsum2,n
character*5 ctail
character*22 decoded
character*36 c
data c/'0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'/
!$omp critical(decode_results)
! write(*,3301) ft,qual,nsmo,nsum,minsync,naggressive,sync !###
!3301 format('decoded.f90:',6i3,f5.1) !###
decoded=decoded0
if(ft.eq.0 .and. minsync.ge.0 .and. int(sync).lt.minsync) then
write(*,1010) utc,snr,dt,freq
else
ctail=' '
if(naggressive.gt.0 .and. ft.gt.0) then
ctail(1:1)='d'
if(ft.eq.1) ctail(1:1)='f'
n=max(2,nsum+1)
n=min(n,36)
ctail(2:2)=c(n:n)
if(nsubmode.gt.0) ctail(3:3)=c(nsmo+1:nsmo+1)
if(ft.eq.2) then
ctail(5:5)='*'
if(qual.le.9) ctail(5:5)=char(48+qual)
if(qual.lt.3) decoded(21:21)='?'
endif
endif
write(*,1010) utc,snr,dt,freq,'#',decoded,ctail
1010 format(i4.4,i4,f5.1,i5,1x,a1,1x,a22,a5)
endif
write(13,1012) utc,nint(sync),snr,dt,float(freq),drift,decoded,ft,nsum,nsmo
1012 format(i4.4,i4,i5,f6.2,f8.0,i4,3x,a22,' JT65',3i3)
call flush(6)
!$omp end critical(decode_results)
select type(this)
type is (counting_jt65_decoder)
this%decoded = this%decoded + 1
end select
end subroutine jt65_decoded
subroutine jt9_decoded (this, utc, sync, snr, dt, freq, drift, decoded)
use jt9_decode
implicit none
class(jt9_decoder), intent(inout) :: this
integer, intent(in) :: utc
real, intent(in) :: sync
integer, intent(in) :: snr
real, intent(in) :: dt
real, intent(in) :: freq
integer, intent(in) :: drift
character(len=22), intent(in) :: decoded
!$omp critical(decode_results)
write(*,1000) utc,snr,dt,nint(freq),decoded
1000 format(i4.4,i4,f5.1,i5,1x,'@',1x,a22)
write(13,1002) utc,nint(sync),snr,dt,freq,drift,decoded
1002 format(i4.4,i4,i5,f6.1,f8.0,i4,3x,a22,' JT9')
call flush(6)
!$omp end critical(decode_results)
select type(this)
type is (counting_jt9_decoder)
this%decoded = this%decoded + 1
end select
end subroutine jt9_decoded
end subroutine multimode_decoder