WSJT-X/plotter.cpp
Bill Somerville c669046be1 Merged from trunk:
------------------------------------------------------------------------
r7861 | k9an | 2017-07-12 22:49:39 +0100 (Wed, 12 Jul 2017) | 1 line

Use quarter-symbol steps for time sync. Lower sync threshold. Implement subtraction and two pass decoding. Use osd2 only near nfqso.
------------------------------------------------------------------------
r7862 | k9an | 2017-07-13 01:28:57 +0100 (Thu, 13 Jul 2017) | 1 line

Fix NHSYM.
------------------------------------------------------------------------
r7863 | k9an | 2017-07-13 01:31:52 +0100 (Thu, 13 Jul 2017) | 1 line

Fix a comment. No code changes.
------------------------------------------------------------------------
r7864 | k9an | 2017-07-13 01:43:56 +0100 (Thu, 13 Jul 2017) | 1 line

Fix another bounds error.
------------------------------------------------------------------------
r7879 | k1jt | 2017-07-14 17:02:01 +0100 (Fri, 14 Jul 2017) | 1 line

Code cleanup and test ofFT8 decodes with erasures.  Do not use on the air.
------------------------------------------------------------------------
r7881 | k1jt | 2017-07-14 19:19:48 +0100 (Fri, 14 Jul 2017) | 1 line

Fix nutc in jt9; alternative sync value for late-start FT8 signals.
------------------------------------------------------------------------
r7882 | k9an | 2017-07-14 20:22:53 +0100 (Fri, 14 Jul 2017) | 1 line

Move ft8apset to a separate file.
------------------------------------------------------------------------
r7884 | k9an | 2017-07-14 20:35:22 +0100 (Fri, 14 Jul 2017) | 1 line

Add ft8apset.f90.
------------------------------------------------------------------------
r7885 | k9an | 2017-07-14 20:46:04 +0100 (Fri, 14 Jul 2017) | 1 line

Update call to ft8b.
------------------------------------------------------------------------
r7886 | k9an | 2017-07-14 21:12:29 +0100 (Fri, 14 Jul 2017) | 1 line

More work on ap.
------------------------------------------------------------------------
r7887 | k9an | 2017-07-14 23:09:50 +0100 (Fri, 14 Jul 2017) | 1 line

More work on AP. Deep decode is unstable - not for use on the air.
------------------------------------------------------------------------
r7890 | k9an | 2017-07-15 01:33:25 +0100 (Sat, 15 Jul 2017) | 1 line

Turn off ap.
------------------------------------------------------------------------
r7891 | k9an | 2017-07-15 02:49:44 +0100 (Sat, 15 Jul 2017) | 1 line

Add some more items to the lun 81 diagnostics.
------------------------------------------------------------------------
r7892 | k9an | 2017-07-15 15:21:18 +0100 (Sat, 15 Jul 2017) | 1 line

Properly calculate metrics for non-ap bits that reside in symbols that contain ap bits.
------------------------------------------------------------------------
r7893 | k9an | 2017-07-15 16:43:41 +0100 (Sat, 15 Jul 2017) | 1 line

Use overlap and add to apply reference filter/amplitude equalization.
------------------------------------------------------------------------
r7894 | k9an | 2017-07-15 16:46:46 +0100 (Sat, 15 Jul 2017) | 1 line

Improve a comment.
------------------------------------------------------------------------
r7895 | k9an | 2017-07-16 01:10:37 +0100 (Sun, 16 Jul 2017) | 1 line

Make refspec filter causal for overlap and add.
------------------------------------------------------------------------
r7911 | k9an | 2017-07-16 16:56:06 +0100 (Sun, 16 Jul 2017) | 1 line

More work on Deep decoding.
------------------------------------------------------------------------
r7917 | k9an | 2017-07-16 18:08:09 +0100 (Sun, 16 Jul 2017) | 1 line

Properly round the printed snr.
------------------------------------------------------------------------
r7925 | k9an | 2017-07-18 02:12:11 +0100 (Tue, 18 Jul 2017) | 1 line

Work on ap decoding. Diagnostic write enabled.
------------------------------------------------------------------------
r7926 | k9an | 2017-07-18 16:22:20 +0100 (Tue, 18 Jul 2017) | 1 line

Fix a bug in AP decoding when iaptype=2. Decrease time-sync search range to +/- 1.5s. Fix a big with erasure decoding.
------------------------------------------------------------------------
r7927 | k1jt | 2017-07-20 00:23:20 +0100 (Thu, 20 Jul 2017) | 1 line

Remove slider next to audio level meter.
------------------------------------------------------------------------
r7928 | k1jt | 2017-07-20 16:15:00 +0100 (Thu, 20 Jul 2017) | 6 lines

1. Alt+F8 arms "Call 1st" as if a CQ had been sent.
2. "Call 1st" label turns red when armed to respond to a caller.
3. Suppress some recognizable false decodes, send them to cumulative file
   "data_dir/false_decodes.txt".
4. Reduce sleep delay in decoder() to 10 ms.

------------------------------------------------------------------------
r7929 | k1jt | 2017-07-20 20:23:17 +0100 (Thu, 20 Jul 2017) | 1 line

Fix wording in list of keyboard shortcuts.
------------------------------------------------------------------------
r7930 | k1jt | 2017-07-20 20:25:08 +0100 (Thu, 20 Jul 2017) | 2 lines

Comment out diagnostic write.

------------------------------------------------------------------------
r7931 | k9an | 2017-07-20 22:08:36 +0100 (Thu, 20 Jul 2017) | 1 line

Only print dupes if SNR is higher than what has already been printed.
------------------------------------------------------------------------
r7932 | k9an | 2017-07-21 23:02:06 +0100 (Fri, 21 Jul 2017) | 1 line

Add to the list of allowed keywords in jtmsg.f90.
------------------------------------------------------------------------
r7933 | k9an | 2017-07-22 04:01:09 +0100 (Sat, 22 Jul 2017) | 1 line

Add variables lapon and napwid to control ap decoding. Reconfigure the logic for AP decoding and ordered-statistics decoding.
------------------------------------------------------------------------
r7934 | k9an | 2017-07-22 14:21:03 +0100 (Sat, 22 Jul 2017) | 1 line

Prevent a certain type of non-standard message from being flagged as a false decode.
------------------------------------------------------------------------
r7935 | k9an | 2017-07-22 18:12:48 +0100 (Sat, 22 Jul 2017) | 1 line

More informative end-of-line annotation for AP decodes.
------------------------------------------------------------------------
r7936 | k9an | 2017-07-24 15:23:22 +0100 (Mon, 24 Jul 2017) | 1 line

Bring msk144d2 more up to date. Runs now, but still needs more work.
------------------------------------------------------------------------
r7937 | k1jt | 2017-07-24 15:48:16 +0100 (Mon, 24 Jul 2017) | 2 lines

Correct the spacing between marked lowest and highest FT8 tones for RxFreq (green) and TxFreq (red). 

------------------------------------------------------------------------
r7938 | bsomervi | 2017-07-24 20:27:14 +0100 (Mon, 24 Jul 2017) | 4 lines

Add double clickable push button and radio button widgets

These emit  doubleClicked signal  when double-clicked,  otherwise they
are identical to their super-classes.
------------------------------------------------------------------------
r7939 | bsomervi | 2017-07-24 20:27:23 +0100 (Mon, 24 Jul 2017) | 42 lines

Add the  option to ALT+click  a decoded CQ  or QRZ message  which only
moves the Rx  frequency to theirs, this facilitates  calling a station
who is busy and may have  many callers on their frequency. Updated the
corresponding mouse shortcuts help text.

Allow for times with seconds when parsing fast mode and FT8 decodes.

Exclude the RR73 grid square from  and grid validation or matching, it
is not a grid square any more as  far as WSJT-X is concerned, it is an
RRR substitute.

Add a  simple state  machine for  QSO progress  such that  replies and
auto-sequencing can be better controlled.

Get compound callsign edge cases working again and allow QSOs from and
to compound callsign holders working in as many situations as possible
including  auto-sequencing and  FT8 auto-reply  mode.  This  does mean
that a  "DE W6/K1ABC DM93"  type message close to  a callers Tx  or Rx
frequency will be taken  as a reply to a CQ call  despite it not being
explicitly addressed back to the  CQ caller. Compound callsigns should
work in MSK144 contest  mode also as well as in  short code modes with
some  minor  restrictions   (short  codes  will  not   be  used  where
configuration demands that  a message be used to send  a full compound
callsign).

Auto sequencing  has been made  generic such that  it can be  used for
more than one mode if desired.

Allow the use of free text messages to sign off in auto sequenced QSOs
without the message  being overwritten by the  sequencer. Double click
actions have  been added to the  Tx5 radio and push  buttons to revert
back to the default standard 73 message.

Make DisplayText  class interface  more idiomatic  C++ and  simplify a
bit.

Fixed  some  displayed widget  arrangements  for  different modes  and
sub-modes  so that  they  are  consistent when  starting  up and  when
switching mode or sub-mode.

This is  a big change which  has been extensively tested  but no doubt
there will also be some new defects introduced.
------------------------------------------------------------------------
r7940 | bsomervi | 2017-07-25 17:51:19 +0100 (Tue, 25 Jul 2017) | 1 line

Fix issue with Tx5 not being generated with a new DX Call
------------------------------------------------------------------------
r7941 | bsomervi | 2017-07-25 17:51:27 +0100 (Tue, 25 Jul 2017) | 1 line

Fix country name display that broke in r7939
------------------------------------------------------------------------
r7942 | bsomervi | 2017-07-25 17:51:34 +0100 (Tue, 25 Jul 2017) | 1 line

Ensure JT9 lowest decode frequency spin box is disabled when not available
------------------------------------------------------------------------
r7943 | bsomervi | 2017-07-25 17:51:42 +0100 (Tue, 25 Jul 2017) | 4 lines

Pick up tail-enders when completing a call 1st QSO after re-enabling auto Tx

Allow  any message  to  start  a QSO  so  long as  we  are  not in  an
auto-reply QSO.
------------------------------------------------------------------------
r7944 | bsomervi | 2017-07-25 17:51:49 +0100 (Tue, 25 Jul 2017) | 1 line

Exclude all decode quality markers from internal decode parsing and matching
------------------------------------------------------------------------
r7945 | k9an | 2017-07-25 20:06:05 +0100 (Tue, 25 Jul 2017) | 1 line

Move '?' quality warning to message(22:22).
------------------------------------------------------------------------
r7946 | k9an | 2017-07-25 21:55:13 +0100 (Tue, 25 Jul 2017) | 1 line

Reject candiates with fewer than 7 correct hard-decoded sync symbols.
------------------------------------------------------------------------
r7947 | bsomervi | 2017-07-26 02:38:37 +0100 (Wed, 26 Jul 2017) | 1 line

Force Settings tab to Radio tab when navigating there from a rig error message
------------------------------------------------------------------------
r7948 | bsomervi | 2017-07-26 02:38:44 +0100 (Wed, 26 Jul 2017) | 1 line

Correct the highlighting of the Call 1st check box label
------------------------------------------------------------------------
r7949 | bsomervi | 2017-07-26 02:38:57 +0100 (Wed, 26 Jul 2017) | 5 lines

Option to skip using grid reply message

Enable and disable  by double-clicking the Tx1 button  or the adjacent
radio button.  Tx1 message shows  grayed out  when the Tx1  message is
elided.
------------------------------------------------------------------------
r7950 | bsomervi | 2017-07-26 02:39:04 +0100 (Wed, 26 Jul 2017) | 6 lines

Option to use RR73 grid message as RRR message substitutes

Enable or  disable by double-clicking  the Tx4 button or  the adjacent
radio button. Is auto disabled by a band change as it is expected that
the user  reassess the  conditions to see  if message  repetitions are
unlikely to be needed.
------------------------------------------------------------------------
r7951 | bsomervi | 2017-07-26 02:39:11 +0100 (Wed, 26 Jul 2017) | 1 line

Fix highlighting of the call first check box label
------------------------------------------------------------------------
r7952 | bsomervi | 2017-07-26 02:39:23 +0100 (Wed, 26 Jul 2017) | 1 line

Better behavior and tool tips for Txn buttons and radio buttons
------------------------------------------------------------------------
r7953 | bsomervi | 2017-07-26 02:39:30 +0100 (Wed, 26 Jul 2017) | 1 line

Auto Tx stop when calling a CQer who answers another station on your Tx frequency
------------------------------------------------------------------------
r7954 | bsomervi | 2017-07-26 11:56:12 +0100 (Wed, 26 Jul 2017) | 1 line

Add menu option to turn on AP decoding in FT8 mode
------------------------------------------------------------------------
r7955 | k9an | 2017-07-26 14:05:34 +0100 (Wed, 26 Jul 2017) | 1 line

Enable AP for any decoding level.
------------------------------------------------------------------------
r7956 | k1jt | 2017-07-26 14:44:31 +0100 (Wed, 26 Jul 2017) | 1 line

Remove obsolete test program.
------------------------------------------------------------------------
r7957 | bsomervi | 2017-07-26 22:18:59 +0100 (Wed, 26 Jul 2017) | 11 lines

Use the low confidence decode quality marker to elide spots and pass info via UDP

The UDP  decode and reply message  have been augmented with  a boolean
flag denoting a  low confidence decode when set.  Existing clients can
safely use the  reply message without passing the flag  as the default
value will  still action  messages that have  high confidence.  If low
confidence decodes  are to be passed  back via the reply  message then
the low  confidence flag must be  included and correctly set  to match
the original decode.

See NetworkMessage.hpp for message fields and meanings.
------------------------------------------------------------------------
r7958 | bsomervi | 2017-07-26 22:19:21 +0100 (Wed, 26 Jul 2017) | 3 lines

Add QSO state machine state and tx audio offset to parameters passed to slow decoders

Required to pick best AP masks in FT8 decoder
------------------------------------------------------------------------
r7959 | bsomervi | 2017-07-26 23:03:02 +0100 (Wed, 26 Jul 2017) | 1 line

Extend grids looked up from CALL3.TXT from 4 to 6-digits if first 4 match
------------------------------------------------------------------------
r7960 | k9an | 2017-07-27 16:35:40 +0100 (Thu, 27 Jul 2017) | 1 line

nQSOProgress now controls AP decoding. Needs testing - may not be stable with AP enabled.
------------------------------------------------------------------------
r7961 | k9an | 2017-07-27 19:07:54 +0100 (Thu, 27 Jul 2017) | 1 line

Correct some logic so that AP is only on when selected and so that AP decodes of type 4 or greater are limited to the vicinity of nfqso or nftx.
------------------------------------------------------------------------
r7962 | k1jt | 2017-07-27 19:57:53 +0100 (Thu, 27 Jul 2017) | 2 lines

Remove unused arguments from the call to fix_contest_msg().

------------------------------------------------------------------------
r7963 | k1jt | 2017-07-27 21:17:30 +0100 (Thu, 27 Jul 2017) | 1 line

Working on some features for NA VHF contests.  Not finished!
------------------------------------------------------------------------
r7964 | bsomervi | 2017-07-28 01:00:42 +0100 (Fri, 28 Jul 2017) | 1 line

Fix syntax error in statement function definition
------------------------------------------------------------------------
r7965 | bsomervi | 2017-07-28 02:20:22 +0100 (Fri, 28 Jul 2017) | 6 lines

Revert "Extend grids looked up from CALL3.TXT from 4 to 6-digits if first 4 match"

Bad idea, need to  find a better way to extend  grids to 6-digits from
CALL3.TXT.

This reverts commit r7959
------------------------------------------------------------------------
r7968 | k9an | 2017-07-28 16:35:17 +0100 (Fri, 28 Jul 2017) | 1 line

Comment out diagnostic write to lun 81.
------------------------------------------------------------------------
r7969 | k1jt | 2017-07-28 16:50:13 +0100 (Fri, 28 Jul 2017) | 2 lines

Make 72-bit "contest mode" available in FT8 as well as MSK144.

------------------------------------------------------------------------
r7970 | bsomervi | 2017-07-29 00:25:32 +0100 (Sat, 29 Jul 2017) | 7 lines

Change tolerances for auto stop and auto-sequence of some messages

FT8 auto-stop  will only react to  messages within +/- 50Hz  of our Tx
frequency.

Auto-sequence on  "DE ..." and free  text 73 messages will  respond if
they are within 25Hz of our Tx or Rx frequency.
------------------------------------------------------------------------
r7971 | bsomervi | 2017-07-31 02:28:25 +0100 (Mon, 31 Jul 2017) | 1 line

Add extra hidden string length argument to genft8 interface
------------------------------------------------------------------------
r7972 | bsomervi | 2017-07-31 02:28:33 +0100 (Mon, 31 Jul 2017) | 5 lines

Fix FT8 call first behaviour with "Lock Tx=Rx"

Call first combined with "Lock Tx=Rx" (why would anyone consider doing
that!)   should continue  on the  Tx  frequency of  the station  being
worked and not be switched another calling station's frequency.
------------------------------------------------------------------------
r7973 | k1jt | 2017-08-01 19:01:27 +0100 (Tue, 01 Aug 2017) | 1 line

Utility for generating figure for QST/RadCom article.
------------------------------------------------------------------------
r7974 | k1jt | 2017-08-01 19:16:01 +0100 (Tue, 01 Aug 2017) | 2 lines

Tidy up some details for 72-bit contest mode in FT8.

------------------------------------------------------------------------
r7975 | k1jt | 2017-08-01 19:46:12 +0100 (Tue, 01 Aug 2017) | 2 lines

Don't highlight FT8 contest-mode Tx3 message as a free-text message.

------------------------------------------------------------------------
r7976 | k1jt | 2017-08-01 20:32:54 +0100 (Tue, 01 Aug 2017) | 2 lines

Fix the "F4" shortcut description; add usage advuice to "Lock Tx=Rx" tool tip.

------------------------------------------------------------------------
r7980 | k1jt | 2017-08-02 15:05:37 +0100 (Wed, 02 Aug 2017) | 2 lines

Enable "nagain" for FT8, as in other modes.

------------------------------------------------------------------------
r7987 | k1jt | 2017-08-02 20:23:42 +0100 (Wed, 02 Aug 2017) | 2 lines

Updates to the WSJT-X User Guide for Version 1.8.

------------------------------------------------------------------------
r7988 | k1jt | 2017-08-02 20:27:43 +0100 (Wed, 02 Aug 2017) | 2 lines

Add several new screen shots.

------------------------------------------------------------------------
r7989 | k1jt | 2017-08-02 21:43:06 +0100 (Wed, 02 Aug 2017) | 2 lines

Allow auto-seq in QRA64 mode; updates to User Guide.

------------------------------------------------------------------------
r7992 | bsomervi | 2017-08-03 12:23:07 +0100 (Thu, 03 Aug 2017) | 7 lines

Fix an issue with VFO tuning while running Doppler correction

Holding down  the SHIFT  key while  tuning the  rig should  update the
nominal  sked frequency,  not holding  done the  SHIFT key  should not
update the  sked frequency. This  is not  yet perfect and  sometimes a
change to the nominal sked frequency can  get through but it is a rare
as yet unfound race condition.
------------------------------------------------------------------------
r7993 | k9an | 2017-08-03 15:46:21 +0100 (Thu, 03 Aug 2017) | 1 line

1. Use norder=3 for nagain, 2. Renumber aptypes.
------------------------------------------------------------------------
r7994 | k1jt | 2017-08-03 15:48:59 +0100 (Thu, 03 Aug 2017) | 2 lines

Remove the "Weak" checkbox from GUI, it's not implemented. 

------------------------------------------------------------------------
r7995 | k1jt | 2017-08-03 16:12:30 +0100 (Thu, 03 Aug 2017) | 2 lines

More updates to the WSJT-X User Guide.

------------------------------------------------------------------------



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx-1.8@7996 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-08-03 16:42:10 +00:00

749 lines
19 KiB
C++

#include "plotter.h"
#include <math.h>
#include <QDebug>
#include "commons.h"
#include "moc_plotter.cpp"
#include <fstream>
#include <iostream>
#define MAX_SCREENSIZE 2048
CPlotter::CPlotter(QWidget *parent) : //CPlotter Constructor
QFrame {parent},
m_bScaleOK {false},
m_bReference {false},
m_bReference0 {false},
m_fSpan {2000.0},
m_plotZero {0},
m_plotGain {0},
m_plot2dGain {0},
m_plot2dZero {0},
m_nSubMode {0},
m_Running {false},
m_paintEventBusy {false},
m_fftBinWidth {1500.0/2048.0},
m_dialFreq {0.},
m_sum {},
m_dBStepSize {10},
m_FreqUnits {1},
m_hdivs {HORZ_DIVS},
m_line {0},
m_fSample {12000},
m_nsps {6912},
m_Percent2DScreen {30}, //percent of screen used for 2D display
m_Percent2DScreen0 {0},
m_rxFreq {1020},
m_txFreq {0},
m_startFreq {0}
{
setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding);
setFocusPolicy(Qt::StrongFocus);
setAttribute(Qt::WA_PaintOnScreen,false);
setAutoFillBackground(false);
setAttribute(Qt::WA_OpaquePaintEvent, false);
setAttribute(Qt::WA_NoSystemBackground, true);
}
CPlotter::~CPlotter() { } // Destructor
QSize CPlotter::minimumSizeHint() const
{
return QSize(50, 50);
}
QSize CPlotter::sizeHint() const
{
return QSize(180, 180);
}
void CPlotter::resizeEvent(QResizeEvent* ) //resizeEvent()
{
if(!size().isValid()) return;
if( m_Size != size() or (m_bReference != m_bReference0) or
m_Percent2DScreen != m_Percent2DScreen0) {
m_Size = size();
m_w = m_Size.width();
m_h = m_Size.height();
m_h2 = m_Percent2DScreen*m_h/100.0;
if(m_h2>m_h-30) m_h2=m_h-30;
if(m_bReference) m_h2=m_h-30;
if(m_h2<1) m_h2=1;
m_h1=m_h-m_h2;
m_2DPixmap = QPixmap(m_Size.width(), m_h2);
m_2DPixmap.fill(Qt::black);
m_WaterfallPixmap = QPixmap(m_Size.width(), m_h1);
m_OverlayPixmap = QPixmap(m_Size.width(), m_h2);
m_OverlayPixmap.fill(Qt::black);
m_WaterfallPixmap.fill(Qt::black);
m_2DPixmap.fill(Qt::black);
m_ScalePixmap = QPixmap(m_w,30);
m_ScalePixmap.fill(Qt::white);
m_Percent2DScreen0 = m_Percent2DScreen;
}
DrawOverlay();
}
void CPlotter::paintEvent(QPaintEvent *) // paintEvent()
{
if(m_paintEventBusy) return;
m_paintEventBusy=true;
QPainter painter(this);
painter.drawPixmap(0,0,m_ScalePixmap);
painter.drawPixmap(0,30,m_WaterfallPixmap);
painter.drawPixmap(0,m_h1,m_2DPixmap);
m_paintEventBusy=false;
}
void CPlotter::draw(float swide[], bool bScroll, bool bRed)
{
int j,j0;
static int ktop=0;
float y,y2,ymin;
double fac = sqrt(m_binsPerPixel*m_waterfallAvg/15.0);
double gain = fac*pow(10.0,0.02*m_plotGain);
double gain2d = pow(10.0,0.02*(m_plot2dGain));
if(m_bReference != m_bReference0) resizeEvent(NULL);
m_bReference0=m_bReference;
//move current data down one line (must do this before attaching a QPainter object)
if(bScroll) m_WaterfallPixmap.scroll(0,1,0,0,m_w,m_h1);
QPainter painter1(&m_WaterfallPixmap);
m_2DPixmap = m_OverlayPixmap.copy(0,0,m_w,m_h2);
QPainter painter2D(&m_2DPixmap);
if(!painter2D.isActive()) return;
QFont Font("Arial");
Font.setPointSize(12);
Font.setWeight(QFont::Normal);
painter2D.setFont(Font);
if(m_bLinearAvg) {
painter2D.setPen(Qt::yellow);
} else if(m_bReference) {
painter2D.setPen(Qt::blue);
} else {
painter2D.setPen(Qt::green);
}
static QPoint LineBuf[MAX_SCREENSIZE];
static QPoint LineBuf2[MAX_SCREENSIZE];
j=0;
j0=int(m_startFreq/m_fftBinWidth + 0.5);
int iz=XfromFreq(5000.0);
int jz=iz*m_binsPerPixel;
m_fMax=FreqfromX(iz);
m_line++;
if(bScroll) {
flat4_(swide,&iz,&m_Flatten);
flat4_(&dec_data.savg[j0],&jz,&m_Flatten);
}
ymin=1.e30;
if(swide[0]>1.e29 and swide[0]< 1.5e30) painter1.setPen(Qt::green);
if(swide[0]>1.4e30) painter1.setPen(Qt::yellow);
for(int i=0; i<iz; i++) {
y=swide[i];
if(y<ymin) ymin=y;
int y1 = 10.0*gain*y + 10*m_plotZero +40;
if (y1<0) y1=0;
if (y1>254) y1=254;
if (swide[i]<1.e29) painter1.setPen(g_ColorTbl[y1]);
painter1.drawPoint(i,0);
}
float y2min=1.e30;
float y2max=-1.e30;
for(int i=0; i<iz; i++) {
y=swide[i] - ymin;
y2=0;
if(m_bCurrent) y2 = gain2d*y + m_plot2dZero; //Current
if(bScroll) {
float sum=0.0;
int j=j0+m_binsPerPixel*i;
for(int k=0; k<m_binsPerPixel; k++) {
sum+=dec_data.savg[j++];
}
m_sum[i]=sum;
}
if(m_bCumulative) y2=gain2d*(m_sum[i]/m_binsPerPixel + m_plot2dZero);
if(m_Flatten==0) y2 += 15; //### could do better! ###
if(m_bLinearAvg) { //Linear Avg (yellow)
float sum=0.0;
int j=j0+m_binsPerPixel*i;
for(int k=0; k<m_binsPerPixel; k++) {
sum+=spectra_.syellow[j++];
}
y2=gain2d*sum/m_binsPerPixel + m_plot2dZero;
}
if(m_bReference) { //Reference (red)
float df_ref=12000.0/6912.0;
int j=FreqfromX(i)/df_ref + 0.5;
y2=spectra_.ref[j] + m_plot2dZero;
// if(gain2d>1.5) y2=spectra_.filter[j] + m_plot2dZero;
}
if(i==iz-1) {
painter2D.drawPolyline(LineBuf,j);
if(m_mode=="QRA64") {
painter2D.setPen(Qt::red);
painter2D.drawPolyline(LineBuf2,ktop);
}
}
LineBuf[j].setX(i);
LineBuf[j].setY(int(0.9*m_h2-y2*m_h2/70.0));
if(y2<y2min) y2min=y2;
if(y2>y2max) y2max=y2;
j++;
}
if(swide[0]>1.0e29) m_line=0;
if(m_line == painter1.fontMetrics ().height ()) {
painter1.setPen(Qt::white);
QString t;
qint64 ms = QDateTime::currentMSecsSinceEpoch() % 86400000;
int n=(ms/1000) % m_TRperiod;
QDateTime t1=QDateTime::currentDateTimeUtc().addSecs(-n);
if(m_TRperiod < 60) {
t=t1.toString("hh:mm:ss") + " " + m_rxBand;
} else {
t=t1.toString("hh:mm") + " " + m_rxBand;
}
painter1.drawText (5, painter1.fontMetrics ().ascent (), t);
}
if(m_mode=="JT4" or m_mode=="QRA64") {
QPen pen3(Qt::yellow); //Mark freqs of JT4 single-tone msgs
painter2D.setPen(pen3);
Font.setWeight(QFont::Bold);
painter2D.setFont(Font);
int x1=XfromFreq(m_rxFreq);
y=0.2*m_h2;
painter2D.drawText(x1-4,y,"T");
x1=XfromFreq(m_rxFreq+250);
painter2D.drawText(x1-4,y,"M");
x1=XfromFreq(m_rxFreq+500);
painter2D.drawText(x1-4,y,"R");
x1=XfromFreq(m_rxFreq+750);
painter2D.drawText(x1-4,y,"73");
}
if(bRed) {
std::ifstream f;
f.open(m_redFile.toLatin1());
if(f) {
int x,y;
float freq,sync;
float slimit=6.0;
QPen pen0(Qt::red,1);
painter1.setPen(pen0);
for(int i=0; i<99999; i++) {
f >> freq >> sync;
if(f.eof()) break;
x=XfromFreq(freq);
y=(sync-slimit)*3.0;
if(y>0) {
if(y>15.0) y=15.0;
if(x>=0 and x<=m_w) {
painter1.setPen(pen0);
painter1.drawLine(x,0,x,y);
}
}
}
f.close();
}
// m_bDecodeFinished=false;
}
update(); //trigger a new paintEvent
m_bScaleOK=true;
}
void CPlotter::drawRed(int ia, int ib, float swide[])
{
m_ia=ia;
m_ib=ib;
draw(swide,false,true);
}
void CPlotter::DrawOverlay() //DrawOverlay()
{
if(m_OverlayPixmap.isNull()) return;
if(m_WaterfallPixmap.isNull()) return;
int w = m_WaterfallPixmap.width();
int x,y,x1,x2,x3,x4,x5,x6;
float pixperdiv;
double df = m_binsPerPixel*m_fftBinWidth;
QRect rect;
QPen penOrange(QColor(255,165,0),3);
QPen penGreen(Qt::green, 3); //Mark Tol range with green line
QPen penRed(Qt::red, 3); //Mark Tx freq with red
QPainter painter(&m_OverlayPixmap);
painter.initFrom(this);
QLinearGradient gradient(0, 0, 0 ,m_h2); //fill background with gradient
gradient.setColorAt(1, Qt::black);
gradient.setColorAt(0, Qt::darkBlue);
painter.setBrush(gradient);
painter.drawRect(0, 0, m_w, m_h2);
painter.setBrush(Qt::SolidPattern);
m_fSpan = w*df;
// int n=m_fSpan/10;
m_freqPerDiv=10;
if(m_fSpan>100) m_freqPerDiv=20;
if(m_fSpan>250) m_freqPerDiv=50;
if(m_fSpan>500) m_freqPerDiv=100;
if(m_fSpan>1000) m_freqPerDiv=200;
if(m_fSpan>2500) m_freqPerDiv=500;
pixperdiv = m_freqPerDiv/df;
m_hdivs = w*df/m_freqPerDiv + 1.9999;
float xx0=float(m_startFreq)/float(m_freqPerDiv);
xx0=xx0-int(xx0);
int x0=xx0*pixperdiv+0.5;
for( int i=1; i<m_hdivs; i++) { //draw vertical grids
x = (int)((float)i*pixperdiv ) - x0;
if(x >= 0 and x<=m_w) {
painter.setPen(QPen(Qt::white, 1,Qt::DotLine));
painter.drawLine(x, 0, x , m_h2);
}
}
pixperdiv = (float)m_h2 / (float)VERT_DIVS;
painter.setPen(QPen(Qt::white, 1,Qt::DotLine));
for( int i=1; i<VERT_DIVS; i++) { //draw horizontal grids
y = (int)( (float)i*pixperdiv );
painter.drawLine(0, y, w, y);
}
QRect rect0;
QPainter painter0(&m_ScalePixmap);
painter0.initFrom(this);
//create Font to use for scales
QFont Font("Arial");
Font.setPointSize(12);
Font.setWeight(QFont::Normal);
painter0.setFont(Font);
painter0.setPen(Qt::black);
if(m_binsPerPixel < 1) m_binsPerPixel=1;
m_hdivs = w*df/m_freqPerDiv + 0.9999;
m_ScalePixmap.fill(Qt::white);
painter0.drawRect(0, 0, w, 30);
MakeFrequencyStrs();
//draw tick marks on upper scale
pixperdiv = m_freqPerDiv/df;
for( int i=0; i<m_hdivs; i++) { //major ticks
x = (int)((m_xOffset+i)*pixperdiv );
painter0.drawLine(x,18,x,30);
}
int minor=5;
if(m_freqPerDiv==200) minor=4;
for( int i=1; i<minor*m_hdivs; i++) { //minor ticks
x = i*pixperdiv/minor;
painter0.drawLine(x,24,x,30);
}
//draw frequency values
for( int i=0; i<=m_hdivs; i++) {
x = (int)((m_xOffset+i)*pixperdiv - pixperdiv/2);
rect0.setRect(x,0, (int)pixperdiv, 20);
painter0.drawText(rect0, Qt::AlignHCenter|Qt::AlignVCenter,m_HDivText[i]);
}
float bw=9.0*12000.0/m_nsps; //JT9
if(m_mode=="FT8") bw=7*12000.0/1920.0; //FT8
if(m_mode=="JT4") { //JT4
bw=3*11025.0/2520.0; //Max tone spacing (3/4 of actual BW)
if(m_nSubMode==1) bw=2*bw;
if(m_nSubMode==2) bw=4*bw;
if(m_nSubMode==3) bw=9*bw;
if(m_nSubMode==4) bw=18*bw;
if(m_nSubMode==5) bw=36*bw;
if(m_nSubMode==6) bw=72*bw;
painter0.setPen(penGreen);
x1=XfromFreq(m_rxFreq-m_tol);
x2=XfromFreq(m_rxFreq+m_tol);
painter0.drawLine(x1,29,x2,29);
for(int i=0; i<4; i++) {
x1=XfromFreq(m_rxFreq+bw*i/3.0);
int j=24;
if(i==0) j=18;
painter0.drawLine(x1,j,x1,30);
}
painter0.setPen(penRed);
for(int i=0; i<4; i++) {
x1=XfromFreq(m_txFreq+bw*i/3.0);
painter0.drawLine(x1,12,x1,18);
}
}
if(m_modeTx=="JT9" and m_nSubMode>0) { //JT9
bw=8.0*12000.0/m_nsps;
if(m_nSubMode==1) bw=2*bw; //B
if(m_nSubMode==2) bw=4*bw; //C
if(m_nSubMode==3) bw=8*bw; //D
if(m_nSubMode==4) bw=16*bw; //E
if(m_nSubMode==5) bw=32*bw; //F
if(m_nSubMode==6) bw=64*bw; //G
if(m_nSubMode==7) bw=128*bw; //H
}
if(m_mode=="QRA64") { //QRA64
bw=63.0*12000.0/m_nsps;
if(m_nSubMode==1) bw=2*bw; //B
if(m_nSubMode==2) bw=4*bw; //C
if(m_nSubMode==3) bw=8*bw; //D
if(m_nSubMode==4) bw=16*bw; //E
}
if(m_modeTx=="JT65") { //JT65
bw=65.0*11025.0/4096.0;
if(m_nSubMode==1) bw=2*bw; //B
if(m_nSubMode==2) bw=4*bw; //C
}
painter0.setPen(penGreen);
if(m_mode=="WSPR") {
x1=XfromFreq(1400);
x2=XfromFreq(1600);
painter0.drawLine(x1,29,x2,29);
}
if(m_mode=="WSPR-LF") {
x1=XfromFreq(1600);
x2=XfromFreq(1700);
painter0.drawLine(x1,29,x2,29);
}
if(m_mode=="FreqCal") { //FreqCal
x1=XfromFreq(m_rxFreq-m_tol);
x2=XfromFreq(m_rxFreq+m_tol);
painter0.drawLine(x1,29,x2,29);
x1=XfromFreq(m_rxFreq);
painter0.drawLine(x1,24,x1,30);
}
if(m_mode=="JT9" or m_mode=="JT65" or m_mode=="JT9+JT65" or m_mode=="QRA64" or m_mode=="FT8") {
if(m_mode=="QRA64" or (m_mode=="JT65" and m_bVHF)) {
painter0.setPen(penGreen);
x1=XfromFreq(m_rxFreq-m_tol);
x2=XfromFreq(m_rxFreq+m_tol);
painter0.drawLine(x1,28,x2,28);
x1=XfromFreq(m_rxFreq);
painter0.drawLine(x1,24,x1,30);
if(m_mode=="JT65") {
painter0.setPen(penOrange);
x3=XfromFreq(m_rxFreq+20.0*bw/65.0); //RO
painter0.drawLine(x3,24,x3,30);
x4=XfromFreq(m_rxFreq+30.0*bw/65.0); //RRR
painter0.drawLine(x4,24,x4,30);
x5=XfromFreq(m_rxFreq+40.0*bw/65.0); //73
painter0.drawLine(x5,24,x5,30);
}
painter0.setPen(penGreen);
x6=XfromFreq(m_rxFreq+bw); //Highest tone
painter0.drawLine(x6,24,x6,30);
} else {
painter0.setPen(penGreen);
x1=XfromFreq(m_rxFreq);
x2=XfromFreq(m_rxFreq+bw);
painter0.drawLine(x1,24,x1,30);
painter0.drawLine(x1,28,x2,28);
painter0.drawLine(x2,24,x2,30);
}
}
if(m_mode=="JT9" or m_mode=="JT65" or m_mode=="JT9+JT65" or
m_mode.mid(0,4)=="WSPR" or m_mode=="QRA64" or m_mode=="FT8") {
painter0.setPen(penRed);
x1=XfromFreq(m_txFreq);
x2=XfromFreq(m_txFreq+bw);
if(m_mode=="WSPR") {
bw=4*12000.0/8192.0; //WSPR
x1=XfromFreq(m_txFreq-0.5*bw);
x2=XfromFreq(m_txFreq+0.5*bw);
}
if(m_mode=="WSPR-LF") {
bw=3*12000.0/8640.0; //WSPR-LF
x1=XfromFreq(m_txFreq-0.5*bw);
x2=XfromFreq(m_txFreq+0.5*bw);
}
painter0.drawLine(x1,17,x1,21);
painter0.drawLine(x1,17,x2,17);
painter0.drawLine(x2,17,x2,21);
}
if(m_mode=="JT9+JT65") {
QPen pen2(Qt::blue, 3); //Mark the JT65 | JT9 divider
painter0.setPen(pen2);
x1=XfromFreq(m_fMin);
if(x1<2) x1=2;
x2=x1+30;
painter0.drawLine(x1,8,x1,28);
}
if(m_dialFreq>10.13 and m_dialFreq< 10.15 and m_mode.mid(0,4)!="WSPR") {
float f1=1.0e6*(10.1401 - m_dialFreq);
float f2=f1+200.0;
x1=XfromFreq(f1);
x2=XfromFreq(f2);
if(x1<=m_w and x2>=0) {
painter0.setPen(penOrange); //Mark WSPR sub-band orange
painter0.drawLine(x1,9,x2,9);
}
}
}
void CPlotter::MakeFrequencyStrs() //MakeFrequencyStrs
{
int f=(m_startFreq+m_freqPerDiv-1)/m_freqPerDiv;
f*=m_freqPerDiv;
m_xOffset=float(f-m_startFreq)/m_freqPerDiv;
for(int i=0; i<=m_hdivs; i++) {
m_HDivText[i].setNum(f);
f+=m_freqPerDiv;
}
}
int CPlotter::XfromFreq(float f) //XfromFreq()
{
// float w = m_WaterfallPixmap.width();
int x = int(m_w * (f - m_startFreq)/m_fSpan + 0.5);
if(x<0 ) return 0;
if(x>m_w) return m_w;
return x;
}
float CPlotter::FreqfromX(int x) //FreqfromX()
{
return float(m_startFreq + x*m_binsPerPixel*m_fftBinWidth);
}
void CPlotter::SetRunningState(bool running) //SetRunningState()
{
m_Running = running;
}
void CPlotter::setPlotZero(int plotZero) //setPlotZero()
{
m_plotZero=plotZero;
}
int CPlotter::plotZero() //PlotZero()
{
return m_plotZero;
}
void CPlotter::setPlotGain(int plotGain) //setPlotGain()
{
m_plotGain=plotGain;
}
int CPlotter::plotGain() //plotGain()
{
return m_plotGain;
}
int CPlotter::plot2dGain() //plot2dGain
{
return m_plot2dGain;
}
void CPlotter::setPlot2dGain(int n) //setPlot2dGain
{
m_plot2dGain=n;
update();
}
int CPlotter::plot2dZero() //plot2dZero
{
return m_plot2dZero;
}
void CPlotter::setPlot2dZero(int plot2dZero) //setPlot2dZero
{
m_plot2dZero=plot2dZero;
}
void CPlotter::setStartFreq(int f) //SetStartFreq()
{
m_startFreq=f;
resizeEvent(NULL);
update();
}
int CPlotter::startFreq() //startFreq()
{
return m_startFreq;
}
int CPlotter::plotWidth(){return m_WaterfallPixmap.width();} //plotWidth
void CPlotter::UpdateOverlay() {DrawOverlay();} //UpdateOverlay
void CPlotter::setDataFromDisk(bool b) {m_dataFromDisk=b;} //setDataFromDisk
void CPlotter::setRxRange(int fMin) //setRxRange
{
m_fMin=fMin;
}
void CPlotter::setBinsPerPixel(int n) //setBinsPerPixel
{
m_binsPerPixel = n;
DrawOverlay(); //Redraw scales and ticks
update(); //trigger a new paintEvent}
}
int CPlotter::binsPerPixel() //binsPerPixel
{
return m_binsPerPixel;
}
void CPlotter::setWaterfallAvg(int n) //setBinsPerPixel
{
m_waterfallAvg = n;
}
void CPlotter::setRxFreq (int x) //setRxFreq
{
m_rxFreq = x; // x is freq in Hz
DrawOverlay();
update();
}
int CPlotter::rxFreq() {return m_rxFreq;} //rxFreq
void CPlotter::mousePressEvent(QMouseEvent *event) //mousePressEvent
{
int x=event->x();
if(x<0) x=0;
if(x>m_Size.width()) x=m_Size.width();
bool ctrl = (event->modifiers() & Qt::ControlModifier);
bool shift = (event->modifiers() & Qt::ShiftModifier);
int newFreq = int(FreqfromX(x)+0.5);
int oldTxFreq = m_txFreq;
int oldRxFreq = m_rxFreq;
if (ctrl or m_lockTxFreq) {
emit setFreq1 (newFreq, newFreq);
}
else if (shift) {
emit setFreq1 (oldRxFreq, newFreq);
}
else {
emit setFreq1(newFreq,oldTxFreq);
}
int n=1;
if(ctrl) n+=100;
emit freezeDecode1(n);
}
void CPlotter::mouseDoubleClickEvent(QMouseEvent *event) //mouse2click
{
bool ctrl = (event->modifiers() & Qt::ControlModifier);
int n=2;
if(ctrl) n+=100;
emit freezeDecode1(n);
}
void CPlotter::setNsps(int ntrperiod, int nsps) //setNsps
{
m_TRperiod=ntrperiod;
m_nsps=nsps;
m_fftBinWidth=1500.0/2048.0;
if(m_nsps==15360) m_fftBinWidth=1500.0/2048.0;
if(m_nsps==40960) m_fftBinWidth=1500.0/6144.0;
if(m_nsps==82944) m_fftBinWidth=1500.0/12288.0;
if(m_nsps==252000) m_fftBinWidth=1500.0/32768.0;
DrawOverlay(); //Redraw scales and ticks
update(); //trigger a new paintEvent}
}
void CPlotter::setTxFreq(int n) //setTxFreq
{
m_txFreq=n;
DrawOverlay();
update();
}
void CPlotter::setMode(QString mode) //setMode
{
m_mode=mode;
}
void CPlotter::setSubMode(int n) //setSubMode
{
m_nSubMode=n;
}
void CPlotter::setModeTx(QString modeTx) //setModeTx
{
m_modeTx=modeTx;
}
int CPlotter::Fmax()
{
return m_fMax;
}
void CPlotter::setDialFreq(double d)
{
m_dialFreq=d;
DrawOverlay();
update();
}
void CPlotter::setRxBand(QString band)
{
m_rxBand=band;
}
void CPlotter::setFlatten(bool b1, bool b2)
{
m_Flatten=0;
if(b1) m_Flatten=1;
if(b2) m_Flatten=2;
}
void CPlotter::setTol(int n) //setTol()
{
m_tol=n;
DrawOverlay();
}
void CPlotter::setColours(QVector<QColor> const& cl)
{
g_ColorTbl = cl;
}
void CPlotter::SetPercent2DScreen(int percent)
{
m_Percent2DScreen=percent;
resizeEvent(NULL);
update();
}
void CPlotter::setVHF(bool bVHF)
{
m_bVHF=bVHF;
}
void CPlotter::setRedFile(QString fRed)
{
m_redFile=fRed;
}