mirror of
https://github.com/saitohirga/WSJT-X.git
synced 2024-11-18 10:01:57 -05:00
35e377d364
Because setting frequency can change mode and setting mode can change frequency on various rigs it is necessary to set a frequency by first setting a frequency which gets to the correct band and potentially band stack register. Then to set the mode to ensure that any band remembered mode is cleared. Then set frequency again in case the prior mode change moved the frequency (e.g. CW correction). Then set mode again because some rigs set the mode according to frequency. Who would have thought setting the rig frequency via CAT could be so complicated :( TODO: Even this is flawed on some Yaesu rigs that must be band changed to select some settings like aerial socket and pre-amp settings. Merged from wsjtx-1.4 branch. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4997 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
948 lines
31 KiB
C++
948 lines
31 KiB
C++
#include "HamlibTransceiver.hpp"
|
|
|
|
#include <cstring>
|
|
|
|
#include <QByteArray>
|
|
#include <QString>
|
|
#include <QDebug>
|
|
|
|
#include "moc_HamlibTransceiver.cpp"
|
|
|
|
namespace
|
|
{
|
|
// Unfortunately bandwidth is conflated with mode, this is probably
|
|
// because Icom do the same. So we have to care about bandwidth if
|
|
// we want to set mode otherwise we will end up setting unwanted
|
|
// bandwidths every time we change mode. The best we can do via the
|
|
// Hamlib API is to request the normal option for the mode and hope
|
|
// that an appropriate filter is selected. Also ensure that mode is
|
|
// only set is absolutely necessary. On Icoms (and probably others)
|
|
// the filter is selected by number without checking the actual BW
|
|
// so unless the "normal" defaults are set on the rig we won't get
|
|
// desirable results.
|
|
//
|
|
// As an ultimate workaround make sure the user always has the
|
|
// option to skip mode setting altogether.
|
|
|
|
// reroute Hamlib diagnostic messages to Qt
|
|
int debug_callback (enum rig_debug_level_e level, rig_ptr_t /* arg */, char const * format, va_list ap)
|
|
{
|
|
QString message;
|
|
message = message.vsprintf (format, ap).trimmed ();
|
|
|
|
switch (level)
|
|
{
|
|
case RIG_DEBUG_BUG:
|
|
qFatal ("%s", message.toLocal8Bit ().data ());
|
|
break;
|
|
|
|
case RIG_DEBUG_ERR:
|
|
qCritical ("%s", message.toLocal8Bit ().data ());
|
|
break;
|
|
|
|
case RIG_DEBUG_WARN:
|
|
qWarning ("%s", message.toLocal8Bit ().data ());
|
|
break;
|
|
|
|
default:
|
|
qDebug ("%s", message.toLocal8Bit ().data ());
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
// callback function that receives transceiver capabilities from the
|
|
// hamlib libraries
|
|
int rigCallback (rig_caps const * caps, void * callback_data)
|
|
{
|
|
TransceiverFactory::Transceivers * rigs = reinterpret_cast<TransceiverFactory::Transceivers *> (callback_data);
|
|
|
|
QString key;
|
|
if ("Hamlib" == QString::fromLatin1 (caps->mfg_name).trimmed ()
|
|
&& "Dummy" == QString::fromLatin1 (caps->model_name).trimmed ())
|
|
{
|
|
key = TransceiverFactory::basic_transceiver_name_;
|
|
}
|
|
else
|
|
{
|
|
key = QString::fromLatin1 (caps->mfg_name).trimmed ()
|
|
+ ' '+ QString::fromLatin1 (caps->model_name).trimmed ()
|
|
// + ' '+ QString::fromLatin1 (caps->version).trimmed ()
|
|
// + " (" + QString::fromLatin1 (rig_strstatus (caps->status)).trimmed () + ')'
|
|
;
|
|
}
|
|
|
|
auto port_type = TransceiverFactory::Capabilities::none;
|
|
switch (caps->port_type)
|
|
{
|
|
case RIG_PORT_SERIAL:
|
|
port_type = TransceiverFactory::Capabilities::serial;
|
|
break;
|
|
|
|
case RIG_PORT_NETWORK:
|
|
port_type = TransceiverFactory::Capabilities::network;
|
|
break;
|
|
|
|
default: break;
|
|
}
|
|
(*rigs)[key] = TransceiverFactory::Capabilities (caps->rig_model
|
|
, port_type
|
|
, RIG_PTT_RIG == caps->ptt_type || RIG_PTT_RIG_MICDATA == caps->ptt_type
|
|
, RIG_PTT_RIG_MICDATA == caps->ptt_type);
|
|
|
|
return 1; // keep them coming
|
|
}
|
|
|
|
// int frequency_change_callback (RIG * /* rig */, vfo_t vfo, freq_t f, rig_ptr_t arg)
|
|
// {
|
|
// (void)vfo; // unused in release build
|
|
|
|
// Q_ASSERT (vfo == RIG_VFO_CURR); // G4WJS: at the time of writing only current VFO is signalled by hamlib
|
|
|
|
// HamlibTransceiver * transceiver (reinterpret_cast<HamlibTransceiver *> (arg));
|
|
// Q_EMIT transceiver->frequency_change (f, Transceiver::A);
|
|
// return RIG_OK;
|
|
// }
|
|
|
|
class hamlib_tx_vfo_fixup final
|
|
{
|
|
public:
|
|
hamlib_tx_vfo_fixup (RIG * rig, vfo_t tx_vfo)
|
|
: rig_ {rig}
|
|
{
|
|
original_vfo_ = rig_->state.tx_vfo;
|
|
rig_->state.tx_vfo = tx_vfo;
|
|
}
|
|
|
|
~hamlib_tx_vfo_fixup ()
|
|
{
|
|
rig_->state.tx_vfo = original_vfo_;
|
|
}
|
|
|
|
private:
|
|
RIG * rig_;
|
|
vfo_t original_vfo_;
|
|
};
|
|
}
|
|
|
|
void HamlibTransceiver::register_transceivers (TransceiverFactory::Transceivers * registry)
|
|
{
|
|
rig_set_debug_callback (debug_callback, nullptr);
|
|
|
|
#if WSJT_HAMLIB_TRACE
|
|
rig_set_debug (RIG_DEBUG_TRACE);
|
|
#elif defined (NDEBUG)
|
|
rig_set_debug (RIG_DEBUG_ERR);
|
|
#else
|
|
rig_set_debug (RIG_DEBUG_VERBOSE);
|
|
#endif
|
|
|
|
rig_load_all_backends ();
|
|
rig_list_foreach (rigCallback, registry);
|
|
}
|
|
|
|
void HamlibTransceiver::RIGDeleter::cleanup (RIG * rig)
|
|
{
|
|
if (rig)
|
|
{
|
|
// rig->state.obj = 0;
|
|
rig_cleanup (rig);
|
|
}
|
|
}
|
|
|
|
HamlibTransceiver::HamlibTransceiver (int model_number
|
|
, QString const& cat_port
|
|
, int cat_baud
|
|
, TransceiverFactory::DataBits cat_data_bits
|
|
, TransceiverFactory::StopBits cat_stop_bits
|
|
, TransceiverFactory::Handshake cat_handshake
|
|
, bool cat_dtr_always_on
|
|
, bool cat_rts_always_on
|
|
, TransceiverFactory::PTTMethod ptt_type
|
|
, TransceiverFactory::TXAudioSource back_ptt_port
|
|
, QString const& ptt_port
|
|
, int poll_interval)
|
|
: PollingTransceiver {poll_interval}
|
|
, rig_ {rig_init (model_number)}
|
|
, back_ptt_port_ {TransceiverFactory::TX_audio_source_rear == back_ptt_port}
|
|
, is_dummy_ {RIG_MODEL_DUMMY == model_number}
|
|
, reversed_ {false}
|
|
, split_query_works_ {true}
|
|
{
|
|
if (!rig_)
|
|
{
|
|
throw error {tr ("Hamlib initialisation error")};
|
|
}
|
|
|
|
// rig_->state.obj = this;
|
|
|
|
if (!cat_port.isEmpty ())
|
|
{
|
|
set_conf ("rig_pathname", cat_port.toLatin1 ().data ());
|
|
}
|
|
|
|
set_conf ("serial_speed", QByteArray::number (cat_baud).data ());
|
|
set_conf ("data_bits", TransceiverFactory::seven_data_bits == cat_data_bits ? "7" : "8");
|
|
set_conf ("stop_bits", TransceiverFactory::one_stop_bit == cat_stop_bits ? "1" : "2");
|
|
|
|
switch (cat_handshake)
|
|
{
|
|
case TransceiverFactory::handshake_none: set_conf ("serial_handshake", "None"); break;
|
|
case TransceiverFactory::handshake_XonXoff: set_conf ("serial_handshake", "XONXOFF"); break;
|
|
case TransceiverFactory::handshake_hardware: set_conf ("serial_handshake", "Hardware"); break;
|
|
}
|
|
|
|
if (cat_dtr_always_on)
|
|
{
|
|
set_conf ("dtr_state", "ON");
|
|
}
|
|
if (TransceiverFactory::handshake_hardware != cat_handshake && cat_rts_always_on)
|
|
{
|
|
set_conf ("rts_state", "ON");
|
|
}
|
|
|
|
switch (ptt_type)
|
|
{
|
|
case TransceiverFactory::PTT_method_VOX:
|
|
set_conf ("ptt_type", "None");
|
|
break;
|
|
|
|
case TransceiverFactory::PTT_method_CAT:
|
|
// Use the default PTT_TYPE for the rig (defined in the Hamlib
|
|
// rig back-end capabilities).
|
|
break;
|
|
|
|
case TransceiverFactory::PTT_method_DTR:
|
|
case TransceiverFactory::PTT_method_RTS:
|
|
if (!ptt_port.isEmpty () && ptt_port != "None" && ptt_port != cat_port)
|
|
{
|
|
#if defined (WIN32)
|
|
set_conf ("ptt_pathname", ("\\\\.\\" + ptt_port).toLatin1 ().data ());
|
|
#else
|
|
set_conf ("ptt_pathname", ptt_port.toLatin1 ().data ());
|
|
#endif
|
|
}
|
|
|
|
if (TransceiverFactory::PTT_method_DTR == ptt_type)
|
|
{
|
|
set_conf ("ptt_type", "DTR");
|
|
}
|
|
else
|
|
{
|
|
set_conf ("ptt_type", "RTS");
|
|
}
|
|
}
|
|
|
|
// Make Icom CAT split commands less glitchy
|
|
set_conf ("no_xchg", "1");
|
|
|
|
// would be nice to get events but not supported on Windows and also not on a lot of rigs
|
|
// rig_set_freq_callback (rig_.data (), &frequency_change_callback, this);
|
|
}
|
|
|
|
HamlibTransceiver::~HamlibTransceiver ()
|
|
{
|
|
}
|
|
|
|
void HamlibTransceiver::error_check (int ret_code, QString const& doing) const
|
|
{
|
|
if (RIG_OK != ret_code)
|
|
{
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::error_check: error:" << rigerror (ret_code);
|
|
#endif
|
|
|
|
throw error {tr ("Hamlib error: %1 while %2").arg (rigerror (ret_code)).arg (doing)};
|
|
}
|
|
}
|
|
|
|
void HamlibTransceiver::do_start ()
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_start rig:" << QString::fromLatin1 (rig_->caps->mfg_name).trimmed () + ' '
|
|
+ QString::fromLatin1 (rig_->caps->model_name).trimmed ();
|
|
#endif
|
|
|
|
error_check (rig_open (rig_.data ()), tr ("opening connection to rig"));
|
|
|
|
if (!is_dummy_)
|
|
{
|
|
freq_t f1;
|
|
freq_t f2;
|
|
rmode_t m {RIG_MODE_USB};
|
|
rmode_t mb;
|
|
pbwidth_t w {rig_passband_wide (rig_.data (), m)};
|
|
pbwidth_t wb;
|
|
if (!rig_->caps->get_vfo && (rig_->caps->set_vfo || rig_has_vfo_op (rig_.data (), RIG_OP_TOGGLE)))
|
|
{
|
|
// Icom have deficient CAT protocol with no way of reading which
|
|
// VFO is selected or if SPLIT is selected so we have to simply
|
|
// assume it is as when we started by setting at open time right
|
|
// here. We also gather/set other initial state.
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_freq";
|
|
#endif
|
|
error_check (rig_get_freq (rig_.data (), RIG_VFO_CURR, &f1), tr ("getting current frequency"));
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_freq current frequency =" << f1;
|
|
#endif
|
|
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_mode current mode";
|
|
#endif
|
|
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, &m, &w), tr ("getting current mode"));
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_mode current mode =" << rig_strrmode (m) << "bw =" << w;
|
|
#endif
|
|
|
|
if (!rig_->caps->set_vfo)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_vfo_op TOGGLE";
|
|
#endif
|
|
error_check (rig_vfo_op (rig_.data (), RIG_VFO_CURR, RIG_OP_TOGGLE), tr ("exchanging VFOs"));
|
|
}
|
|
else
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_set_vfo to other VFO";
|
|
#endif
|
|
error_check (rig_set_vfo (rig_.data (), rig_->state.vfo_list & RIG_VFO_B ? RIG_VFO_B : RIG_VFO_SUB), tr ("setting current VFO"));
|
|
}
|
|
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_freq other frequency";
|
|
#endif
|
|
error_check (rig_get_freq (rig_.data (), RIG_VFO_CURR, &f2), tr ("getting other VFO frequency"));
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_freq other frequency =" << f2;
|
|
#endif
|
|
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_mode other VFO";
|
|
#endif
|
|
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, &mb, &wb), tr ("getting other VFO mode"));
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_mode other mode =" << rig_strrmode (mb) << "bw =" << wb;
|
|
#endif
|
|
|
|
update_other_frequency (f2);
|
|
|
|
if (!rig_->caps->set_vfo)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_vfo_op TOGGLE";
|
|
#endif
|
|
error_check (rig_vfo_op (rig_.data (), RIG_VFO_CURR, RIG_OP_TOGGLE), tr ("exchanging VFOs"));
|
|
}
|
|
else
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_set_vfo A/MAIN";
|
|
#endif
|
|
error_check (rig_set_vfo (rig_.data (), rig_->state.vfo_list & RIG_VFO_A ? RIG_VFO_A : RIG_VFO_MAIN), tr ("setting current VFO"));
|
|
}
|
|
|
|
if (f1 != f2 || m != mb || w != wb) // we must have started with MAIN/A
|
|
{
|
|
update_rx_frequency (f1);
|
|
}
|
|
else
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_freq";
|
|
#endif
|
|
error_check (rig_get_freq (rig_.data (), RIG_VFO_CURR, &f1), tr ("getting frequency"));
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_freq frequency =" << f1;
|
|
#endif
|
|
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_mode";
|
|
#endif
|
|
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, &m, &w), tr ("getting mode"));
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_mode mode =" << rig_strrmode (m) << "bw =" << w;
|
|
#endif
|
|
|
|
update_rx_frequency (f1);
|
|
}
|
|
|
|
#if WSJT_TRACE_CAT
|
|
// qDebug () << "HamlibTransceiver::init_rig rig_set_split_vfo split off";
|
|
#endif
|
|
// error_check (rig_set_split_vfo (rig_.data (), RIG_VFO_CURR, RIG_SPLIT_OFF, RIG_VFO_CURR), tr ("setting split off"));
|
|
// update_split (false);
|
|
}
|
|
else
|
|
{
|
|
vfo_t v {RIG_VFO_A}; // assume RX always on VFO A/MAIN
|
|
|
|
if (rig_->caps->get_vfo)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_vfo current VFO";
|
|
#endif
|
|
error_check (rig_get_vfo (rig_.data (), &v), tr ("getting current VFO")); // has side effect of establishing current VFO inside hamlib
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_vfo current VFO = " << rig_strvfo (v);
|
|
#endif
|
|
}
|
|
|
|
reversed_ = RIG_VFO_B == v;
|
|
|
|
if (!(rig_->caps->targetable_vfo & (RIG_TARGETABLE_MODE | RIG_TARGETABLE_PURE)))
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_mode current mode";
|
|
#endif
|
|
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, &m, &w), tr ("getting current mode"));
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig rig_get_mode current mode =" << rig_strrmode (m) << "bw =" << w;
|
|
#endif
|
|
}
|
|
}
|
|
update_mode (map_mode (m));
|
|
}
|
|
|
|
tickle_hamlib_ = true;
|
|
|
|
poll ();
|
|
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::init_rig exit" << state () << "reversed =" << reversed_;
|
|
#endif
|
|
}
|
|
|
|
void HamlibTransceiver::do_stop ()
|
|
{
|
|
if (rig_)
|
|
{
|
|
rig_close (rig_.data ());
|
|
}
|
|
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_stop: state:" << state () << "reversed =" << reversed_;
|
|
#endif
|
|
}
|
|
|
|
auto HamlibTransceiver::get_vfos () const -> std::tuple<vfo_t, vfo_t>
|
|
{
|
|
if (rig_->caps->get_vfo)
|
|
{
|
|
vfo_t v;
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::get_vfos rig_get_vfo";
|
|
#endif
|
|
error_check (rig_get_vfo (rig_.data (), &v), tr ("getting current VFO")); // has side effect of establishing current VFO inside hamlib
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::get_vfos rig_get_vfo VFO = " << rig_strvfo (v);
|
|
#endif
|
|
|
|
reversed_ = RIG_VFO_B == v;
|
|
}
|
|
else if (rig_->caps->set_vfo)
|
|
{
|
|
// use VFO A/MAIN for main frequency and B/SUB for Tx
|
|
// frequency if split since these type of radios can only
|
|
// support this way around
|
|
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::get_vfos rig_set_vfo VFO = A/MAIN";
|
|
#endif
|
|
error_check (rig_set_vfo (rig_.data (), rig_->state.vfo_list & RIG_VFO_A ? RIG_VFO_A : RIG_VFO_MAIN), tr ("setting current VFO"));
|
|
}
|
|
// else only toggle available but both VFOs should be substitutable
|
|
|
|
auto rx_vfo = rig_->state.vfo_list & RIG_VFO_A ? RIG_VFO_A : RIG_VFO_MAIN;
|
|
auto tx_vfo = state ().split () ? (rig_->state.vfo_list & RIG_VFO_B ? RIG_VFO_B : RIG_VFO_SUB) : rx_vfo;
|
|
if (reversed_)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::get_vfos reversing VFOs";
|
|
#endif
|
|
std::swap (rx_vfo, tx_vfo);
|
|
}
|
|
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::get_vfos RX VFO = " << rig_strvfo (rx_vfo) << " TX VFO = " << rig_strvfo (tx_vfo);
|
|
#endif
|
|
|
|
return std::make_tuple (rx_vfo, tx_vfo);
|
|
}
|
|
|
|
void HamlibTransceiver::do_frequency (Frequency f, MODE m)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_frequency:" << f << "mode:" << m << "reversed:" << reversed_;
|
|
#endif
|
|
|
|
if (!is_dummy_)
|
|
{
|
|
// for the 1st time as a band change may cause a recalled mode
|
|
// to be set
|
|
error_check (rig_set_freq (rig_.data (), RIG_VFO_CURR, f), tr ("setting frequency"));
|
|
}
|
|
|
|
if (UNK != m)
|
|
{
|
|
do_mode (m, false);
|
|
}
|
|
|
|
if (!is_dummy_)
|
|
{
|
|
// for the 2nd time because a mode change may have caused a
|
|
// frequency change
|
|
error_check (rig_set_freq (rig_.data (), RIG_VFO_CURR, f), tr ("setting frequency"));
|
|
}
|
|
|
|
if (UNK != m)
|
|
{
|
|
// for the second time because some rigs change mode according
|
|
// to frequency such as the TS-2000 auto mode setting
|
|
do_mode (m, false);
|
|
}
|
|
|
|
update_rx_frequency (f);
|
|
}
|
|
|
|
void HamlibTransceiver::do_tx_frequency (Frequency tx, bool rationalise_mode)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_tx_frequency:" << tx << "rationalise mode:" << rationalise_mode << "reversed:" << reversed_;
|
|
#endif
|
|
|
|
if (!is_dummy_)
|
|
{
|
|
auto split = tx ? RIG_SPLIT_ON : RIG_SPLIT_OFF;
|
|
update_split (tx);
|
|
auto vfos = get_vfos ();
|
|
// auto rx_vfo = std::get<0> (vfos); // or use RIG_VFO_CURR
|
|
auto tx_vfo = std::get<1> (vfos);
|
|
|
|
if (tx)
|
|
{
|
|
// Doing set split for the 1st of two times, this one
|
|
// ensures that the internal Hamlib state is correct
|
|
// otherwise rig_set_split_freq() will target the wrong VFO
|
|
// on some rigs
|
|
|
|
if (tickle_hamlib_)
|
|
{
|
|
// This potentially causes issues with the Elecraft K3
|
|
// which will block setting split mode when it deems
|
|
// cross mode split operation not possible. There's not
|
|
// much we can do since the Hamlib Library needs this
|
|
// call at least once to establish the Tx VFO. Best we
|
|
// can do is only do this once per session.
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_tx_frequency rig_set_split_vfo split =" << split;
|
|
#endif
|
|
auto rc = rig_set_split_vfo (rig_.data (), RIG_VFO_CURR, split, tx_vfo);
|
|
if (tx || (-RIG_ENAVAIL != rc && -RIG_ENIMPL != rc))
|
|
{
|
|
// On rigs that can't have split controlled only throw an
|
|
// exception when an error other than command not accepted
|
|
// is returned when trying to leave split mode. This allows
|
|
// fake split mode and non-split mode to work without error
|
|
// on such rigs without having to know anything about the
|
|
// specific rig.
|
|
error_check (rc, tr ("setting/unsetting split mode"));
|
|
}
|
|
|
|
tickle_hamlib_ = false;
|
|
}
|
|
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_tx_frequency rig_set_split_freq";
|
|
#endif
|
|
|
|
hamlib_tx_vfo_fixup fixup (rig_.data (), tx_vfo);
|
|
|
|
// do this before setting the mode because changing band may
|
|
// recall the last mode used on the target band
|
|
error_check (rig_set_split_freq (rig_.data (), RIG_VFO_CURR, tx), tr ("setting split TX frequency"));
|
|
|
|
if (rationalise_mode)
|
|
{
|
|
rmode_t current_mode;
|
|
pbwidth_t current_width;
|
|
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_tx_frequency rig_get_split_mode";
|
|
#endif
|
|
error_check (rig_get_split_mode (rig_.data (), RIG_VFO_CURR, ¤t_mode, ¤t_width), tr ("getting mode of split TX VFO"));
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_tx_frequency rig_get_split_mode mode = " << rig_strrmode (current_mode) << "bw =" << current_width;
|
|
#endif
|
|
|
|
auto new_mode = map_mode (state ().mode ());
|
|
if (new_mode != current_mode)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_tx_frequency rig_set_split_mode mode = " << rig_strrmode (new_mode);
|
|
#endif
|
|
error_check (rig_set_split_mode (rig_.data (), RIG_VFO_CURR, new_mode, rig_passband_wide (rig_.data (), new_mode)), tr ("setting split TX VFO mode"));
|
|
|
|
// do this again as setting the mode may change the frequency
|
|
error_check (rig_set_split_freq (rig_.data (), RIG_VFO_CURR, tx), tr ("setting split TX frequency"));
|
|
}
|
|
}
|
|
}
|
|
|
|
// Enable split last since some rigs (Kenwood for one) come out
|
|
// of split when you switch RX VFO (to set split mode above for
|
|
// example). Also the Elecraft K3 will refuse to go to split
|
|
// with certain VFO A/B mode combinations.
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_tx_frequency rig_set_split_vfo split =" << split;
|
|
#endif
|
|
auto rc = rig_set_split_vfo (rig_.data (), RIG_VFO_CURR, split, tx_vfo);
|
|
if (tx || (-RIG_ENAVAIL != rc && -RIG_ENIMPL != rc))
|
|
{
|
|
// On rigs that can't have split controlled only throw an
|
|
// exception when an error other than command not accepted
|
|
// is returned when trying to leave split mode. This allows
|
|
// fake split mode and non-split mode to work without error
|
|
// on such rigs without having to know anything about the
|
|
// specific rig.
|
|
error_check (rc, tr ("setting/unsetting split mode"));
|
|
}
|
|
}
|
|
|
|
update_other_frequency (tx);
|
|
}
|
|
|
|
void HamlibTransceiver::do_mode (MODE mode, bool rationalise)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_mode:" << mode << "rationalise:" << rationalise;
|
|
#endif
|
|
|
|
if (!is_dummy_)
|
|
{
|
|
auto vfos = get_vfos ();
|
|
// auto rx_vfo = std::get<0> (vfos);
|
|
auto tx_vfo = std::get<1> (vfos);
|
|
|
|
rmode_t current_mode;
|
|
pbwidth_t current_width;
|
|
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_mode rig_get_mode";
|
|
#endif
|
|
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, ¤t_mode, ¤t_width), tr ("getting current VFO mode"));
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_mode rig_get_mode mode = " << rig_strrmode (current_mode) << "bw =" << current_width;
|
|
#endif
|
|
|
|
auto new_mode = map_mode (mode);
|
|
if (new_mode != current_mode)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_mode rig_set_mode mode = " << rig_strrmode (new_mode);
|
|
#endif
|
|
error_check (rig_set_mode (rig_.data (), RIG_VFO_CURR, new_mode, rig_passband_wide (rig_.data (), new_mode)), tr ("setting current VFO mode"));
|
|
}
|
|
|
|
if (state ().split () && rationalise)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_mode rig_get_split_mode";
|
|
#endif
|
|
error_check (rig_get_split_mode (rig_.data (), RIG_VFO_CURR, ¤t_mode, ¤t_width), tr ("getting split TX VFO mode"));
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_mode rig_get_split_mode mode = " << rig_strrmode (current_mode) << "bw =" << current_width;
|
|
#endif
|
|
|
|
if (new_mode != current_mode)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_mode rig_set_split_mode mode = " << rig_strrmode (new_mode);
|
|
#endif
|
|
hamlib_tx_vfo_fixup fixup (rig_.data (), tx_vfo);
|
|
error_check (rig_set_split_mode (rig_.data (), RIG_VFO_CURR, new_mode, rig_passband_wide (rig_.data (), new_mode)), tr ("setting split TX VFO mode"));
|
|
}
|
|
}
|
|
}
|
|
|
|
update_mode (mode);
|
|
}
|
|
|
|
void HamlibTransceiver::poll ()
|
|
{
|
|
if (is_dummy_)
|
|
{
|
|
// split with dummy is never reported since there is no rig
|
|
if (state ().split ())
|
|
{
|
|
update_split (false);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
#if !WSJT_TRACE_CAT_POLLS
|
|
#if defined (NDEBUG)
|
|
rig_set_debug (RIG_DEBUG_ERR);
|
|
#else
|
|
rig_set_debug (RIG_DEBUG_VERBOSE);
|
|
#endif
|
|
#endif
|
|
|
|
freq_t f;
|
|
rmode_t m;
|
|
pbwidth_t w;
|
|
split_t s;
|
|
|
|
if (rig_->caps->get_vfo)
|
|
{
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_vfo";
|
|
#endif
|
|
vfo_t v;
|
|
error_check (rig_get_vfo (rig_.data (), &v), tr ("getting current VFO")); // has side effect of establishing current VFO inside hamlib
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_vfo VFO = " << rig_strvfo (v);
|
|
#endif
|
|
|
|
reversed_ = RIG_VFO_B == v;
|
|
}
|
|
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_freq";
|
|
#endif
|
|
error_check (rig_get_freq (rig_.data (), RIG_VFO_CURR, &f), tr ("getting current VFO frequency"));
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_freq frequency =" << f;
|
|
#endif
|
|
|
|
update_rx_frequency (f);
|
|
|
|
if (state ().split () && (rig_->caps->targetable_vfo & (RIG_TARGETABLE_FREQ | RIG_TARGETABLE_PURE)))
|
|
{
|
|
// only read "other" VFO if in split, this allows rigs like
|
|
// FlexRadio to work in Kenwood TS-2000 mode despite them
|
|
// not having a FB; command
|
|
|
|
// we can only probe current VFO unless rig supports reading
|
|
// the other one directly because we can't glitch the Rx
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_freq other VFO";
|
|
#endif
|
|
error_check (rig_get_freq (rig_.data ()
|
|
, reversed_
|
|
? (rig_->state.vfo_list & RIG_VFO_A ? RIG_VFO_A : RIG_VFO_MAIN)
|
|
: (rig_->state.vfo_list & RIG_VFO_B ? RIG_VFO_B : RIG_VFO_SUB)
|
|
, &f), tr ("getting current VFO frequency"));
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_freq other VFO =" << f;
|
|
#endif
|
|
|
|
update_other_frequency (f);
|
|
}
|
|
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_mode";
|
|
#endif
|
|
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, &m, &w), tr ("getting current VFO mode"));
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_mode mode =" << rig_strrmode (m) << "bw =" << w;
|
|
#endif
|
|
|
|
update_mode (map_mode (m));
|
|
|
|
if (rig_->caps->get_split_vfo && split_query_works_)
|
|
{
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_split_vfo";
|
|
#endif
|
|
vfo_t v {RIG_VFO_NONE}; // so we can tell if it doesn't get updated :(
|
|
auto rc = rig_get_split_vfo (rig_.data (), RIG_VFO_CURR, &s, &v);
|
|
if (-RIG_OK == rc && RIG_SPLIT_ON == s)
|
|
{
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_split_vfo split = " << s << " VFO = " << rig_strvfo (v);
|
|
#endif
|
|
|
|
update_split (true);
|
|
// if (RIG_VFO_A == v)
|
|
// {
|
|
// reversed_ = true; // not sure if this helps us here
|
|
// }
|
|
}
|
|
else if (-RIG_OK == rc) // not split
|
|
{
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_split_vfo split = " << s << " VFO = " << rig_strvfo (v);
|
|
#endif
|
|
|
|
update_split (false);
|
|
}
|
|
else
|
|
{
|
|
// Some rigs (Icom) don't have a way of reporting SPLIT
|
|
// mode
|
|
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_split_vfo can't do on this rig";
|
|
#endif
|
|
|
|
// just report how we see it based on prior commands
|
|
split_query_works_ = false;
|
|
}
|
|
}
|
|
|
|
if (RIG_PTT_NONE != rig_->state.pttport.type.ptt && rig_->caps->get_ptt)
|
|
{
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_ptt";
|
|
#endif
|
|
ptt_t p;
|
|
auto rc = rig_get_ptt (rig_.data (), RIG_VFO_CURR, &p);
|
|
if (-RIG_ENAVAIL != rc && -RIG_ENIMPL != rc) // may fail if
|
|
// Net rig ctl and target doesn't
|
|
// support command
|
|
{
|
|
error_check (rc, tr ("getting PTT state"));
|
|
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
|
|
qDebug () << "HamlibTransceiver::poll rig_get_ptt PTT =" << p;
|
|
#endif
|
|
|
|
update_PTT (!(RIG_PTT_OFF == p));
|
|
}
|
|
}
|
|
|
|
#if !WSJT_TRACE_CAT_POLLS
|
|
#if WSJT_HAMLIB_TRACE
|
|
rig_set_debug (RIG_DEBUG_TRACE);
|
|
#elif defined (NDEBUG)
|
|
rig_set_debug (RIG_DEBUG_ERR);
|
|
#else
|
|
rig_set_debug (RIG_DEBUG_VERBOSE);
|
|
#endif
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void HamlibTransceiver::do_ptt (bool on)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_ptt:" << on << state () << "reversed =" << reversed_;
|
|
#endif
|
|
|
|
if (on)
|
|
{
|
|
if (RIG_PTT_NONE != rig_->state.pttport.type.ptt)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_ptt rig_set_ptt PTT = true";
|
|
#endif
|
|
error_check (rig_set_ptt (rig_.data (), RIG_VFO_CURR, back_ptt_port_ ? RIG_PTT_ON_DATA : RIG_PTT_ON), tr ("setting PTT on"));
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (RIG_PTT_NONE != rig_->state.pttport.type.ptt)
|
|
{
|
|
#if WSJT_TRACE_CAT
|
|
qDebug () << "HamlibTransceiver::do_ptt rig_set_ptt PTT = false";
|
|
#endif
|
|
error_check (rig_set_ptt (rig_.data (), RIG_VFO_CURR, RIG_PTT_OFF), tr ("setting PTT off"));
|
|
}
|
|
}
|
|
|
|
update_PTT (on);
|
|
}
|
|
|
|
void HamlibTransceiver::set_conf (char const * item, char const * value)
|
|
{
|
|
token_t token = rig_token_lookup (rig_.data (), item);
|
|
if (RIG_CONF_END != token) // only set if valid for rig model
|
|
{
|
|
error_check (rig_set_conf (rig_.data (), token, value), tr ("setting a configuration item"));
|
|
}
|
|
}
|
|
|
|
QByteArray HamlibTransceiver::get_conf (char const * item)
|
|
{
|
|
token_t token = rig_token_lookup (rig_.data (), item);
|
|
QByteArray value {128, '\0'};
|
|
if (RIG_CONF_END != token) // only get if valid for rig model
|
|
{
|
|
error_check (rig_get_conf (rig_.data (), token, value.data ()), tr ("getting a configuration item"));
|
|
}
|
|
return value;
|
|
}
|
|
|
|
auto HamlibTransceiver::map_mode (rmode_t m) const -> MODE
|
|
{
|
|
switch (m)
|
|
{
|
|
case RIG_MODE_AM:
|
|
case RIG_MODE_SAM:
|
|
case RIG_MODE_AMS:
|
|
case RIG_MODE_DSB:
|
|
return AM;
|
|
|
|
case RIG_MODE_CW:
|
|
return CW;
|
|
|
|
case RIG_MODE_CWR:
|
|
return CW_R;
|
|
|
|
case RIG_MODE_USB:
|
|
case RIG_MODE_ECSSUSB:
|
|
case RIG_MODE_SAH:
|
|
case RIG_MODE_FAX:
|
|
return USB;
|
|
|
|
case RIG_MODE_LSB:
|
|
case RIG_MODE_ECSSLSB:
|
|
case RIG_MODE_SAL:
|
|
return LSB;
|
|
|
|
case RIG_MODE_RTTY:
|
|
return FSK;
|
|
|
|
case RIG_MODE_RTTYR:
|
|
return FSK_R;
|
|
|
|
case RIG_MODE_PKTLSB:
|
|
return DIG_L;
|
|
|
|
case RIG_MODE_PKTUSB:
|
|
return DIG_U;
|
|
|
|
case RIG_MODE_FM:
|
|
case RIG_MODE_WFM:
|
|
return FM;
|
|
|
|
case RIG_MODE_PKTFM:
|
|
return DIG_FM;
|
|
|
|
default:
|
|
return UNK;
|
|
}
|
|
}
|
|
|
|
rmode_t HamlibTransceiver::map_mode (MODE mode) const
|
|
{
|
|
switch (mode)
|
|
{
|
|
case AM: return RIG_MODE_AM;
|
|
case CW: return RIG_MODE_CW;
|
|
case CW_R: return RIG_MODE_CWR;
|
|
case USB: return RIG_MODE_USB;
|
|
case LSB: return RIG_MODE_LSB;
|
|
case FSK: return RIG_MODE_RTTY;
|
|
case FSK_R: return RIG_MODE_RTTYR;
|
|
case DIG_L: return RIG_MODE_PKTLSB;
|
|
case DIG_U: return RIG_MODE_PKTUSB;
|
|
case FM: return RIG_MODE_FM;
|
|
case DIG_FM: return RIG_MODE_PKTFM;
|
|
default: break;
|
|
}
|
|
return RIG_MODE_USB; // quieten compiler grumble
|
|
}
|