WSJT-X/HamlibTransceiver.cpp
Bill Somerville 3d80de5b03 The Elecraft K3 is very picky about going to split mode
We have to ensure  that the band and mode along  with the frequency of
both VFOs is set before attempting to enable split mode.

Merged from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4879 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-01-02 21:49:41 +00:00

942 lines
31 KiB
C++

#include "HamlibTransceiver.hpp"
#include <cstring>
#include <QByteArray>
#include <QString>
#include <QDebug>
#include "moc_HamlibTransceiver.cpp"
namespace
{
// Unfortunately bandwidth is conflated with mode, this is probably
// because Icom do the same. So we have to care about bandwidth if
// we want to set mode otherwise we will end up setting unwanted
// bandwidths every time we change mode. The best we can do via the
// Hamlib API is to request the normal option for the mode and hope
// that an appropriate filter is selected. Also ensure that mode is
// only set is absolutely necessary. On Icoms (and probably others)
// the filter is selected by number without checking the actual BW
// so unless the "normal" defaults are set on the rig we won't get
// desirable results.
//
// As an ultimate workaround make sure the user always has the
// option to skip mode setting altogether.
// reroute Hamlib diagnostic messages to Qt
int debug_callback (enum rig_debug_level_e level, rig_ptr_t /* arg */, char const * format, va_list ap)
{
QString message;
message = message.vsprintf (format, ap).trimmed ();
switch (level)
{
case RIG_DEBUG_BUG:
qFatal ("%s", message.toLocal8Bit ().data ());
break;
case RIG_DEBUG_ERR:
qCritical ("%s", message.toLocal8Bit ().data ());
break;
case RIG_DEBUG_WARN:
qWarning ("%s", message.toLocal8Bit ().data ());
break;
default:
qDebug ("%s", message.toLocal8Bit ().data ());
break;
}
return 0;
}
// callback function that receives transceiver capabilities from the
// hamlib libraries
int rigCallback (rig_caps const * caps, void * callback_data)
{
TransceiverFactory::Transceivers * rigs = reinterpret_cast<TransceiverFactory::Transceivers *> (callback_data);
QString key;
if ("Hamlib" == QString::fromLatin1 (caps->mfg_name).trimmed ()
&& "Dummy" == QString::fromLatin1 (caps->model_name).trimmed ())
{
key = TransceiverFactory::basic_transceiver_name_;
}
else
{
key = QString::fromLatin1 (caps->mfg_name).trimmed ()
+ ' '+ QString::fromLatin1 (caps->model_name).trimmed ()
// + ' '+ QString::fromLatin1 (caps->version).trimmed ()
// + " (" + QString::fromLatin1 (rig_strstatus (caps->status)).trimmed () + ')'
;
}
auto port_type = TransceiverFactory::Capabilities::none;
switch (caps->port_type)
{
case RIG_PORT_SERIAL:
port_type = TransceiverFactory::Capabilities::serial;
break;
case RIG_PORT_NETWORK:
port_type = TransceiverFactory::Capabilities::network;
break;
default: break;
}
(*rigs)[key] = TransceiverFactory::Capabilities (caps->rig_model
, port_type
, RIG_PTT_RIG == caps->ptt_type || RIG_PTT_RIG_MICDATA == caps->ptt_type
, RIG_PTT_RIG_MICDATA == caps->ptt_type);
return 1; // keep them coming
}
// int frequency_change_callback (RIG * /* rig */, vfo_t vfo, freq_t f, rig_ptr_t arg)
// {
// (void)vfo; // unused in release build
// Q_ASSERT (vfo == RIG_VFO_CURR); // G4WJS: at the time of writing only current VFO is signalled by hamlib
// HamlibTransceiver * transceiver (reinterpret_cast<HamlibTransceiver *> (arg));
// Q_EMIT transceiver->frequency_change (f, Transceiver::A);
// return RIG_OK;
// }
class hamlib_tx_vfo_fixup final
{
public:
hamlib_tx_vfo_fixup (RIG * rig, vfo_t tx_vfo)
: rig_ {rig}
{
original_vfo_ = rig_->state.tx_vfo;
rig_->state.tx_vfo = tx_vfo;
}
~hamlib_tx_vfo_fixup ()
{
rig_->state.tx_vfo = original_vfo_;
}
private:
RIG * rig_;
vfo_t original_vfo_;
};
}
void HamlibTransceiver::register_transceivers (TransceiverFactory::Transceivers * registry)
{
rig_set_debug_callback (debug_callback, nullptr);
#if WSJT_HAMLIB_TRACE
rig_set_debug (RIG_DEBUG_TRACE);
#elif defined (NDEBUG)
rig_set_debug (RIG_DEBUG_ERR);
#else
rig_set_debug (RIG_DEBUG_VERBOSE);
#endif
rig_load_all_backends ();
rig_list_foreach (rigCallback, registry);
}
void HamlibTransceiver::RIGDeleter::cleanup (RIG * rig)
{
if (rig)
{
// rig->state.obj = 0;
rig_cleanup (rig);
}
}
HamlibTransceiver::HamlibTransceiver (int model_number
, QString const& cat_port
, int cat_baud
, TransceiverFactory::DataBits cat_data_bits
, TransceiverFactory::StopBits cat_stop_bits
, TransceiverFactory::Handshake cat_handshake
, bool cat_dtr_always_on
, bool cat_rts_always_on
, TransceiverFactory::PTTMethod ptt_type
, TransceiverFactory::TXAudioSource back_ptt_port
, QString const& ptt_port
, int poll_interval)
: PollingTransceiver {poll_interval}
, rig_ {rig_init (model_number)}
, back_ptt_port_ {TransceiverFactory::TX_audio_source_rear == back_ptt_port}
, is_dummy_ {RIG_MODEL_DUMMY == model_number}
, reversed_ {false}
, split_query_works_ {true}
{
if (!rig_)
{
throw error {tr ("Hamlib initialisation error")};
}
// rig_->state.obj = this;
if (!cat_port.isEmpty ())
{
set_conf ("rig_pathname", cat_port.toLatin1 ().data ());
}
set_conf ("serial_speed", QByteArray::number (cat_baud).data ());
set_conf ("data_bits", TransceiverFactory::seven_data_bits == cat_data_bits ? "7" : "8");
set_conf ("stop_bits", TransceiverFactory::one_stop_bit == cat_stop_bits ? "1" : "2");
switch (cat_handshake)
{
case TransceiverFactory::handshake_none: set_conf ("serial_handshake", "None"); break;
case TransceiverFactory::handshake_XonXoff: set_conf ("serial_handshake", "XONXOFF"); break;
case TransceiverFactory::handshake_hardware: set_conf ("serial_handshake", "Hardware"); break;
}
if (cat_dtr_always_on)
{
set_conf ("dtr_state", "ON");
}
if (TransceiverFactory::handshake_hardware != cat_handshake && cat_rts_always_on)
{
set_conf ("rts_state", "ON");
}
switch (ptt_type)
{
case TransceiverFactory::PTT_method_VOX:
set_conf ("ptt_type", "None");
break;
case TransceiverFactory::PTT_method_CAT:
// Use the default PTT_TYPE for the rig (defined in the Hamlib
// rig back-end capabilities).
break;
case TransceiverFactory::PTT_method_DTR:
case TransceiverFactory::PTT_method_RTS:
if (!ptt_port.isEmpty () && ptt_port != "None" && ptt_port != cat_port)
{
#if defined (WIN32)
set_conf ("ptt_pathname", ("\\\\.\\" + ptt_port).toLatin1 ().data ());
#else
set_conf ("ptt_pathname", ptt_port.toLatin1 ().data ());
#endif
}
if (TransceiverFactory::PTT_method_DTR == ptt_type)
{
set_conf ("ptt_type", "DTR");
}
else
{
set_conf ("ptt_type", "RTS");
}
}
// Make Icom CAT split commands less glitchy
set_conf ("no_xchg", "1");
// would be nice to get events but not supported on Windows and also not on a lot of rigs
// rig_set_freq_callback (rig_.data (), &frequency_change_callback, this);
}
HamlibTransceiver::~HamlibTransceiver ()
{
}
void HamlibTransceiver::error_check (int ret_code, QString const& doing) const
{
if (RIG_OK != ret_code)
{
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::error_check: error:" << rigerror (ret_code);
#endif
throw error {tr ("Hamlib error: %1 while %2").arg (rigerror (ret_code)).arg (doing)};
}
}
void HamlibTransceiver::do_start ()
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_start rig:" << QString::fromLatin1 (rig_->caps->mfg_name).trimmed () + ' '
+ QString::fromLatin1 (rig_->caps->model_name).trimmed ();
#endif
error_check (rig_open (rig_.data ()), tr ("opening connection to rig"));
if (!is_dummy_)
{
freq_t f1;
freq_t f2;
rmode_t m {RIG_MODE_USB};
rmode_t mb;
pbwidth_t w {rig_passband_wide (rig_.data (), m)};
pbwidth_t wb;
if (!rig_->caps->get_vfo && (rig_->caps->set_vfo || rig_has_vfo_op (rig_.data (), RIG_OP_TOGGLE)))
{
// Icom have deficient CAT protocol with no way of reading which
// VFO is selected or if SPLIT is selected so we have to simply
// assume it is as when we started by setting at open time right
// here. We also gather/set other initial state.
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_freq";
#endif
error_check (rig_get_freq (rig_.data (), RIG_VFO_CURR, &f1), tr ("getting current frequency"));
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_freq current frequency =" << f1;
#endif
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_mode current mode";
#endif
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, &m, &w), tr ("getting current mode"));
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_mode current mode =" << rig_strrmode (m) << "bw =" << w;
#endif
if (!rig_->caps->set_vfo)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_vfo_op TOGGLE";
#endif
error_check (rig_vfo_op (rig_.data (), RIG_VFO_CURR, RIG_OP_TOGGLE), tr ("exchanging VFOs"));
}
else
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_set_vfo to other VFO";
#endif
error_check (rig_set_vfo (rig_.data (), rig_->state.vfo_list & RIG_VFO_B ? RIG_VFO_B : RIG_VFO_SUB), tr ("setting current VFO"));
}
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_freq other frequency";
#endif
error_check (rig_get_freq (rig_.data (), RIG_VFO_CURR, &f2), tr ("getting other VFO frequency"));
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_freq other frequency =" << f2;
#endif
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_mode other VFO";
#endif
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, &mb, &wb), tr ("getting other VFO mode"));
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_mode other mode =" << rig_strrmode (mb) << "bw =" << wb;
#endif
update_other_frequency (f2);
if (!rig_->caps->set_vfo)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_vfo_op TOGGLE";
#endif
error_check (rig_vfo_op (rig_.data (), RIG_VFO_CURR, RIG_OP_TOGGLE), tr ("exchanging VFOs"));
}
else
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_set_vfo A/MAIN";
#endif
error_check (rig_set_vfo (rig_.data (), rig_->state.vfo_list & RIG_VFO_A ? RIG_VFO_A : RIG_VFO_MAIN), tr ("setting current VFO"));
}
if (f1 != f2 || m != mb || w != wb) // we must have started with MAIN/A
{
update_rx_frequency (f1);
}
else
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_freq";
#endif
error_check (rig_get_freq (rig_.data (), RIG_VFO_CURR, &f1), tr ("getting frequency"));
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_freq frequency =" << f1;
#endif
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_mode";
#endif
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, &m, &w), tr ("getting mode"));
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_mode mode =" << rig_strrmode (m) << "bw =" << w;
#endif
update_rx_frequency (f1);
}
#if WSJT_TRACE_CAT
// qDebug () << "HamlibTransceiver::init_rig rig_set_split_vfo split off";
#endif
// error_check (rig_set_split_vfo (rig_.data (), RIG_VFO_CURR, RIG_SPLIT_OFF, RIG_VFO_CURR), tr ("setting split off"));
// update_split (false);
}
else
{
vfo_t v {RIG_VFO_A}; // assume RX always on VFO A/MAIN
if (rig_->caps->get_vfo)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_vfo current VFO";
#endif
error_check (rig_get_vfo (rig_.data (), &v), tr ("getting current VFO")); // has side effect of establishing current VFO inside hamlib
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_vfo current VFO = " << rig_strvfo (v);
#endif
}
reversed_ = RIG_VFO_B == v;
if (!(rig_->caps->targetable_vfo & (RIG_TARGETABLE_MODE | RIG_TARGETABLE_PURE)))
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_mode current mode";
#endif
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, &m, &w), tr ("getting current mode"));
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig rig_get_mode current mode =" << rig_strrmode (m) << "bw =" << w;
#endif
}
}
update_mode (map_mode (m));
}
tickle_hamlib_ = true;
poll ();
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::init_rig exit" << state () << "reversed =" << reversed_;
#endif
}
void HamlibTransceiver::do_stop ()
{
if (rig_)
{
rig_close (rig_.data ());
}
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_stop: state:" << state () << "reversed =" << reversed_;
#endif
}
auto HamlibTransceiver::get_vfos () const -> std::tuple<vfo_t, vfo_t>
{
if (rig_->caps->get_vfo)
{
vfo_t v;
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::get_vfos rig_get_vfo";
#endif
error_check (rig_get_vfo (rig_.data (), &v), tr ("getting current VFO")); // has side effect of establishing current VFO inside hamlib
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::get_vfos rig_get_vfo VFO = " << rig_strvfo (v);
#endif
reversed_ = RIG_VFO_B == v;
}
else if (rig_->caps->set_vfo)
{
// use VFO A/MAIN for main frequency and B/SUB for Tx
// frequency if split since these type of radios can only
// support this way around
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::get_vfos rig_set_vfo VFO = A/MAIN";
#endif
error_check (rig_set_vfo (rig_.data (), rig_->state.vfo_list & RIG_VFO_A ? RIG_VFO_A : RIG_VFO_MAIN), tr ("setting current VFO"));
}
// else only toggle available but both VFOs should be substitutable
auto rx_vfo = rig_->state.vfo_list & RIG_VFO_A ? RIG_VFO_A : RIG_VFO_MAIN;
auto tx_vfo = state ().split () ? (rig_->state.vfo_list & RIG_VFO_B ? RIG_VFO_B : RIG_VFO_SUB) : rx_vfo;
if (reversed_)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::get_vfos reversing VFOs";
#endif
std::swap (rx_vfo, tx_vfo);
}
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::get_vfos RX VFO = " << rig_strvfo (rx_vfo) << " TX VFO = " << rig_strvfo (tx_vfo);
#endif
return std::make_tuple (rx_vfo, tx_vfo);
}
void HamlibTransceiver::do_frequency (Frequency f, MODE m)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_frequency:" << f << "mode:" << m << "reversed:" << reversed_;
#endif
if (!is_dummy_)
{
// for the 1st time as a band change may cause a recalled mode
// to be set
error_check (rig_set_freq (rig_.data (), RIG_VFO_CURR, f), tr ("setting frequency"));
}
if (UNK != m)
{
do_mode (m, false);
}
if (!is_dummy_)
{
// for the 2nd time because a mode change may have caused a
// frequency change
error_check (rig_set_freq (rig_.data (), RIG_VFO_CURR, f), tr ("setting frequency"));
}
update_rx_frequency (f);
}
void HamlibTransceiver::do_tx_frequency (Frequency tx, bool rationalise_mode)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_tx_frequency:" << tx << "rationalise mode:" << rationalise_mode << "reversed:" << reversed_;
#endif
if (!is_dummy_)
{
auto split = tx ? RIG_SPLIT_ON : RIG_SPLIT_OFF;
update_split (tx);
auto vfos = get_vfos ();
// auto rx_vfo = std::get<0> (vfos); // or use RIG_VFO_CURR
auto tx_vfo = std::get<1> (vfos);
if (tx)
{
// Doing set split for the 1st of two times, this one
// ensures that the internal Hamlib state is correct
// otherwise rig_set_split_freq() will target the wrong VFO
// on some rigs
if (tickle_hamlib_)
{
// This potentially causes issues with the Elecraft K3
// which will block setting split mode when it deems
// cross mode split operation not possible. There's not
// much we can do since the Hamlib Library needs this
// call at least once to establish the Tx VFO. Best we
// can do is only do this once per session.
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_tx_frequency rig_set_split_vfo split =" << split;
#endif
auto rc = rig_set_split_vfo (rig_.data (), RIG_VFO_CURR, split, tx_vfo);
if (tx || (-RIG_ENAVAIL != rc && -RIG_ENIMPL != rc))
{
// On rigs that can't have split controlled only throw an
// exception when an error other than command not accepted
// is returned when trying to leave split mode. This allows
// fake split mode and non-split mode to work without error
// on such rigs without having to know anything about the
// specific rig.
error_check (rc, tr ("setting/unsetting split mode"));
}
tickle_hamlib_ = false;
}
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_tx_frequency rig_set_split_freq";
#endif
hamlib_tx_vfo_fixup fixup (rig_.data (), tx_vfo);
// do this before setting the mode because changing band may
// recall the last mode used on the target band
error_check (rig_set_split_freq (rig_.data (), RIG_VFO_CURR, tx), tr ("setting split TX frequency"));
if (rationalise_mode)
{
rmode_t current_mode;
pbwidth_t current_width;
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_tx_frequency rig_get_split_mode";
#endif
error_check (rig_get_split_mode (rig_.data (), RIG_VFO_CURR, &current_mode, &current_width), tr ("getting mode of split TX VFO"));
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_tx_frequency rig_get_split_mode mode = " << rig_strrmode (current_mode) << "bw =" << current_width;
#endif
auto new_mode = map_mode (state ().mode ());
if (new_mode != current_mode)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_tx_frequency rig_set_split_mode mode = " << rig_strrmode (new_mode);
#endif
error_check (rig_set_split_mode (rig_.data (), RIG_VFO_CURR, new_mode, rig_passband_wide (rig_.data (), new_mode)), tr ("setting split TX VFO mode"));
// do this again as setting the mode may change the frequency
error_check (rig_set_split_freq (rig_.data (), RIG_VFO_CURR, tx), tr ("setting split TX frequency"));
}
}
}
// Enable split last since some rigs (Kenwood for one) come out
// of split when you switch RX VFO (to set split mode above for
// example). Also the Elecraft K3 will refuse to go to split
// with certain VFO A/B mode combinations.
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_tx_frequency rig_set_split_vfo split =" << split;
#endif
auto rc = rig_set_split_vfo (rig_.data (), RIG_VFO_CURR, split, tx_vfo);
if (tx || (-RIG_ENAVAIL != rc && -RIG_ENIMPL != rc))
{
// On rigs that can't have split controlled only throw an
// exception when an error other than command not accepted
// is returned when trying to leave split mode. This allows
// fake split mode and non-split mode to work without error
// on such rigs without having to know anything about the
// specific rig.
error_check (rc, tr ("setting/unsetting split mode"));
}
}
update_other_frequency (tx);
}
void HamlibTransceiver::do_mode (MODE mode, bool rationalise)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_mode:" << mode << "rationalise:" << rationalise;
#endif
if (!is_dummy_)
{
auto vfos = get_vfos ();
// auto rx_vfo = std::get<0> (vfos);
auto tx_vfo = std::get<1> (vfos);
rmode_t current_mode;
pbwidth_t current_width;
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_mode rig_get_mode";
#endif
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, &current_mode, &current_width), tr ("getting current VFO mode"));
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_mode rig_get_mode mode = " << rig_strrmode (current_mode) << "bw =" << current_width;
#endif
auto new_mode = map_mode (mode);
if (new_mode != current_mode)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_mode rig_set_mode mode = " << rig_strrmode (new_mode);
#endif
error_check (rig_set_mode (rig_.data (), RIG_VFO_CURR, new_mode, rig_passband_wide (rig_.data (), new_mode)), tr ("setting current VFO mode"));
}
if (state ().split () && rationalise)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_mode rig_get_split_mode";
#endif
error_check (rig_get_split_mode (rig_.data (), RIG_VFO_CURR, &current_mode, &current_width), tr ("getting split TX VFO mode"));
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_mode rig_get_split_mode mode = " << rig_strrmode (current_mode) << "bw =" << current_width;
#endif
if (new_mode != current_mode)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_mode rig_set_split_mode mode = " << rig_strrmode (new_mode);
#endif
hamlib_tx_vfo_fixup fixup (rig_.data (), tx_vfo);
error_check (rig_set_split_mode (rig_.data (), RIG_VFO_CURR, new_mode, rig_passband_wide (rig_.data (), new_mode)), tr ("setting split TX VFO mode"));
}
}
}
update_mode (mode);
}
void HamlibTransceiver::poll ()
{
if (is_dummy_)
{
// split with dummy is never reported since there is no rig
if (state ().split ())
{
update_split (false);
}
}
else
{
#if !WSJT_TRACE_CAT_POLLS
#if defined (NDEBUG)
rig_set_debug (RIG_DEBUG_ERR);
#else
rig_set_debug (RIG_DEBUG_VERBOSE);
#endif
#endif
freq_t f;
rmode_t m;
pbwidth_t w;
split_t s;
if (rig_->caps->get_vfo)
{
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_vfo";
#endif
vfo_t v;
error_check (rig_get_vfo (rig_.data (), &v), tr ("getting current VFO")); // has side effect of establishing current VFO inside hamlib
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_vfo VFO = " << rig_strvfo (v);
#endif
reversed_ = RIG_VFO_B == v;
}
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_freq";
#endif
error_check (rig_get_freq (rig_.data (), RIG_VFO_CURR, &f), tr ("getting current VFO frequency"));
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_freq frequency =" << f;
#endif
update_rx_frequency (f);
if (state ().split () && (rig_->caps->targetable_vfo & (RIG_TARGETABLE_FREQ | RIG_TARGETABLE_PURE)))
{
// only read "other" VFO if in split, this allows rigs like
// FlexRadio to work in Kenwood TS-2000 mode despite them
// not having a FB; command
// we can only probe current VFO unless rig supports reading
// the other one directly because we can't glitch the Rx
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_freq other VFO";
#endif
error_check (rig_get_freq (rig_.data ()
, reversed_
? (rig_->state.vfo_list & RIG_VFO_A ? RIG_VFO_A : RIG_VFO_MAIN)
: (rig_->state.vfo_list & RIG_VFO_B ? RIG_VFO_B : RIG_VFO_SUB)
, &f), tr ("getting current VFO frequency"));
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_freq other VFO =" << f;
#endif
update_other_frequency (f);
}
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_mode";
#endif
error_check (rig_get_mode (rig_.data (), RIG_VFO_CURR, &m, &w), tr ("getting current VFO mode"));
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_mode mode =" << rig_strrmode (m) << "bw =" << w;
#endif
update_mode (map_mode (m));
if (rig_->caps->get_split_vfo && split_query_works_)
{
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_split_vfo";
#endif
vfo_t v {RIG_VFO_NONE}; // so we can tell if it doesn't get updated :(
auto rc = rig_get_split_vfo (rig_.data (), RIG_VFO_CURR, &s, &v);
if (-RIG_OK == rc && RIG_SPLIT_ON == s)
{
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_split_vfo split = " << s << " VFO = " << rig_strvfo (v);
#endif
update_split (true);
// if (RIG_VFO_A == v)
// {
// reversed_ = true; // not sure if this helps us here
// }
}
else if (-RIG_OK == rc) // not split
{
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_split_vfo split = " << s << " VFO = " << rig_strvfo (v);
#endif
update_split (false);
}
else if (-RIG_ENAVAIL == rc || -RIG_ENIMPL == rc) // Some rigs (Icom) don't have a way of reporting SPLIT mode
{
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_split_vfo can't do on this rig";
#endif
// just report how we see it based on prior commands
split_query_works_ = false;
}
else
{
error_check (rc, tr ("getting split TX VFO"));
}
}
if (RIG_PTT_NONE != rig_->state.pttport.type.ptt && rig_->caps->get_ptt)
{
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_ptt";
#endif
ptt_t p;
auto rc = rig_get_ptt (rig_.data (), RIG_VFO_CURR, &p);
if (-RIG_ENAVAIL != rc && -RIG_ENIMPL != rc) // may fail if
// Net rig ctl and target doesn't
// support command
{
error_check (rc, tr ("getting PTT state"));
#if WSJT_TRACE_CAT && WSJT_TRACE_CAT_POLLS
qDebug () << "HamlibTransceiver::poll rig_get_ptt PTT =" << p;
#endif
update_PTT (!(RIG_PTT_OFF == p));
}
}
#if !WSJT_TRACE_CAT_POLLS
#if WSJT_HAMLIB_TRACE
rig_set_debug (RIG_DEBUG_TRACE);
#elif defined (NDEBUG)
rig_set_debug (RIG_DEBUG_ERR);
#else
rig_set_debug (RIG_DEBUG_VERBOSE);
#endif
#endif
}
}
void HamlibTransceiver::do_ptt (bool on)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_ptt:" << on << state () << "reversed =" << reversed_;
#endif
if (on)
{
if (RIG_PTT_NONE != rig_->state.pttport.type.ptt)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_ptt rig_set_ptt PTT = true";
#endif
error_check (rig_set_ptt (rig_.data (), RIG_VFO_CURR, back_ptt_port_ ? RIG_PTT_ON_DATA : RIG_PTT_ON), tr ("setting PTT on"));
}
}
else
{
if (RIG_PTT_NONE != rig_->state.pttport.type.ptt)
{
#if WSJT_TRACE_CAT
qDebug () << "HamlibTransceiver::do_ptt rig_set_ptt PTT = false";
#endif
error_check (rig_set_ptt (rig_.data (), RIG_VFO_CURR, RIG_PTT_OFF), tr ("setting PTT off"));
}
}
update_PTT (on);
}
void HamlibTransceiver::set_conf (char const * item, char const * value)
{
token_t token = rig_token_lookup (rig_.data (), item);
if (RIG_CONF_END != token) // only set if valid for rig model
{
error_check (rig_set_conf (rig_.data (), token, value), tr ("setting a configuration item"));
}
}
QByteArray HamlibTransceiver::get_conf (char const * item)
{
token_t token = rig_token_lookup (rig_.data (), item);
QByteArray value {128, '\0'};
if (RIG_CONF_END != token) // only get if valid for rig model
{
error_check (rig_get_conf (rig_.data (), token, value.data ()), tr ("getting a configuration item"));
}
return value;
}
auto HamlibTransceiver::map_mode (rmode_t m) const -> MODE
{
switch (m)
{
case RIG_MODE_AM:
case RIG_MODE_SAM:
case RIG_MODE_AMS:
case RIG_MODE_DSB:
return AM;
case RIG_MODE_CW:
return CW;
case RIG_MODE_CWR:
return CW_R;
case RIG_MODE_USB:
case RIG_MODE_ECSSUSB:
case RIG_MODE_SAH:
case RIG_MODE_FAX:
return USB;
case RIG_MODE_LSB:
case RIG_MODE_ECSSLSB:
case RIG_MODE_SAL:
return LSB;
case RIG_MODE_RTTY:
return FSK;
case RIG_MODE_RTTYR:
return FSK_R;
case RIG_MODE_PKTLSB:
return DIG_L;
case RIG_MODE_PKTUSB:
return DIG_U;
case RIG_MODE_FM:
case RIG_MODE_WFM:
return FM;
case RIG_MODE_PKTFM:
return DIG_FM;
default:
return UNK;
}
}
rmode_t HamlibTransceiver::map_mode (MODE mode) const
{
switch (mode)
{
case AM: return RIG_MODE_AM;
case CW: return RIG_MODE_CW;
case CW_R: return RIG_MODE_CWR;
case USB: return RIG_MODE_USB;
case LSB: return RIG_MODE_LSB;
case FSK: return RIG_MODE_RTTY;
case FSK_R: return RIG_MODE_RTTYR;
case DIG_L: return RIG_MODE_PKTLSB;
case DIG_U: return RIG_MODE_PKTUSB;
case FM: return RIG_MODE_FM;
case DIG_FM: return RIG_MODE_PKTFM;
default: break;
}
return RIG_MODE_USB; // quieten compiler grumble
}